ACCREDITED LABORATORY

Transcription

1 A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD Bangkok, THAILAND for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 18 June 2005). Presented this 8 th day of September President For the Accreditation Council Certificate Number Valid to December 31, 2009 For the tests or types of tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.

2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, THAILAND Dirk Fleischer ELECTRICAL Valid to: December 31, 2009 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following electromagnetic compatibility and product safety. Electromagnetic Compatibility Test Technology Emissions Radiated/ Conducted Test Method(s) FCC Part 15, FCC Part 18, using ANSI C63.4; IEC CISPR 11; AS/NZS CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; AS/NZS CISPR 14; EN ; IEC CISPR 14-1; IEC CISPR 15 (1999); IEC CISPR 15 (2005); AS/NZS CISPR 15; EN 55015; TIS ; IEC CISPR 22(2000); IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS Current Harmonics IEC (2000); IEC (2005); EN ; TIS Voltage Fluctuational Flicker IEC (1994); IEC (1994+A1: 2001+A2: 2005); EN ; TIS Click Rate AS/NZS CISPR 14: IEC CISPR 14-1; EN Insertion loss AS/NZS CISPR 15; CISPR 15; EN Immunity Electrostatic Discharge IEC (1995); IEC (1995+A1: A2: 2000); EN ; TIS Radiated Immunity IEC (1995); IEC (2006); EN ; TIS ; IEC ; EN Electrical Fast Transients IEC (1995+ A1: 2000); IEC (2004); EN ; TIS (A2LA Cert. No ) 09/08/08 Page 1 of 7

3 Immunity (cont d) Surge Immunity IEC (1995), IEC (2005); EN ; TIS Conducted Immunity IEC ; EN Magnetic Field Immunity IEC (1993); IEC (1993+A1: 2000); EN ; TIS Voltage Dips Short Interruptions IEC (1994), IEC (2004); Voltage Variations EN ; TIS Harmonics and interharmonics IEC ; EN including mains signalling at A.C. power port, low frequency Audio / video immunity EN 55020; IEC CISPR 20 Product Family/ Generic Standard International IEC (1992) IEC (2006) EN l TIS IEC EN l IEC EN IEC EN IEC EN EN Electromagnetic compatibility (EMC) - Part 4- I: Testing and measurement techniques-overview of IEC 6l series. Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment EN Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN IEC CISPR 14-2 IEC CISPR 20 (1999) IEC CISPR 20 (2006) EN TIS IEC CISPR 24 (1997) IEC CISPR 24 (1997+ A1: A2: 2002) EN TIS Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Product family standard Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement Information technology equipment - Immunity characteristics - Limits and methods of measurement (A2LA Cert. No ) 09/08/08 Page 2 of 7

4 International IEC IEC IEC EN IEC EN IEC EN IEC EN EN Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests. Cable networks for television signals, Sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment Low-voltage switchgear and controlgear Part 1: General rules Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers Electrical equipment for measurement, control and laboratory use - EMC requirements Equipment for general lighting purposes EMC immunity requirements Household and similar electrical appliances - Electromagnetic fields - Methods for evaluation and measurement Product Safety Test Methods - Input current - Durability of markings - Access to live parts - Energy hazards - SELV circuits - TNV circuits, limits, connections, voltages generated externally - Limited current circuits, values - Resistances of earthing conductors - Humidity conditioning - Creepage, distances, clearances - Working voltage - Measurement of transient levels - Thermal cycling and thermal ageing - Mechanical Strength - Enclosed and sealed parts - Cord anchorage and strain relief - Stability - Steady force test - Drop test - Stress relief - Wall or ceiling mounted equipment - Handles and manual controls - Direct plug-in equipment - Protection against hazardous moving parts - Thermal Requirements - Temperature rise - Resistance to abnormal heat - Material tests, Flammability test - Material tests, Glow wire test - Touch current and protective conductor current test - Electrical strength - Telecommunication network separation and protection - Voltage surge test, Impulse test (A2LA Cert. No ) 09/08/08 Page 3 of 7

5 Test Standards International IEC 50088, EN IEC 60529, EN IEC 60065, EN IEC (2005) EN TIS IEC/EN ,-2,-3,-4,-5,-6,-7,-8,-9,-11,-12,- 13,-14,-15,-16,-18,-22 IEC (2001+ A1: A2: 2006) IEC (2001+ A1: 2004) EN TIS IEC (2002+ A1: A2: 2006) IEC (1993) EN TIS IEC (2002+ A1: 2004) IEC (2002) EN TIS IEC (2002+ A1: A2: 2006) IEC (1993) EN TIS IEC (2002+ A1: 2005) IEC (1992) EN TIS IEC (2002+ A1: 2004) IEC (1997) EN TIS IEC (2002+ A1: A2: 2006) IEC (1993) EN TIS IEC (2002+ A1: 2005) IEC (1992) EN TIS IEC (2002+ A1: A2: 2006) IEC (1993) EN TIS IEC (2003) IEC (1993) EN TIS Safety of electric toys. Degrees of protection provided by enclosures (IP code) Audio, video and similar electronic apparatus - Safety requirements Information technology equipment - Safety - Part I: General Requirements. Rotating electrical machines. Rating and performance Household and similar electrical appliances Safety Part 1: General Requirements. Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance. Part 2-3: Particular requirements for electric irons. Part 2-4: Particular requirements for spin extractors. Part 2-5: Particular requirements for dishwashers. Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances. Part 2-7: Particular requirements for washing machines. Part 2-8: Particular requirements for shavers, hair clippers and similar appliances. Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances. Part 2-11: Particular requirements for tumble dryers (A2LA Cert. No ) 09/08/08 Page 4 of 7

6 International IEC (2005) IEC (1992) EN TIS IEC (2002+ A1: 2004) IEC (1994) EN TIS IEC (2006) IEC (1994) EN TIS IEC EN IEC EN IEC (2005) IEC (2003) EN TIS IEC EN IEC (2002+ A1: A2: 2006) IEC (1999) EN TIS IEC EN IEC (2002+ A1: A2: 2007) IEC (1993) EN TIS IEC (2002+ A1: 2004) IEC (1994) EN TIS IEC EN IEC (2002+ A1: 2006) IEC (1999) EN TIS IEC (2005) IEC (1993) EN TIS IEC (2002+ A1: 2006) IEC (2002) EN TIS IEC (2002+ A1: A2: 2005) IEC (1995) EN TIS Part 2-12: Particular requirements for warming plates and similar appliances. Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances. Part 2-14: Particular requirements for kitchen machines. Part 2-15: Particular requirements for appliances for heating liquids. Part 2-21: Particular requirements for storage water heaters. Part 2-23: Particular requirements for appliances for skin or hair care. Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers. Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens. Part 2-26: Particular requirements for clocks. Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation. Part 2-29: Particular requirements for battery chargers. Part 2-30: Particular requirements for room heaters. Part 2-31: Particular requirements for range hoods. Part 2-32: Particular requirements for massage appliances. Part 2-35: Particular requirements for instantaneous water heaters. Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers. (A2LA Cert. No ) 09/08/08 Page 5 of 7

7 International IEC EN IEC (2003) IEC (1997) EN TIS IEC EN IEC (2005) IEC (1994) EN TIS IEC (2002+ A1: 2007) IEC (1997) EN TIS IEC EN IEC EN IEC EN IEC (2002+ A1: 2006) IEC (1997) EN TIS IEC (2005) EN TIS IEC (2002+ A1: 2006) IEC (1994) EN TIS IEC , EN IEC , EN IEC , EN IEC , EN IEC , EN IEC , EN IEC (1998) EN TIS IEC (2002) IEC (1997) EN TIS IEC (1998) EN TIS IEC EN Part 2-41: Particular requirements for pumps. Part 2-44: Particular requirements for ironers. Part 2-45: Particular requirements for portable heating tools and similar appliances. Part 2-52: Particular requirements for oral hygiene appliances. Part2-53: Particular requirements for sauna heating appliances. Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam. Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds. Part 2-56: Particular requirements for projectors and similar appliances. Part 2-59: Particular requirements for insect killers. Part 2-65: Particular requirements for air-cleaning appliances. Part 2-74: Particular requirements for portable immersion heaters. Part 2-78: Particular requirements for outdoor barbecues. Part 2-80: Particular requirements for fans. Part 2-81: Particular requirements for foot warmers and heating mats. Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems. Part 2-98: Particular requirements for humidifiers. Luminaries - Part1: General requirements and tests. Part 2-1: Particular requirements - Fixed general purpose luminaries. Part 2-4: Particular requirements - Portable general purpose luminaries. Part 2-5: Particular requirements - Floodlights. Part 2-6: Particular requirements - Luminaries with built-in transformers or converters for filament lamps. (A2LA Cert. No ) 09/08/08 Page 6 of 7

8 International IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC (1999) EN TIS IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN Part 2-7: Particular requirements - Portable luminaries for garden use. Part 2-8: Particular requirements - Hand lamps. Part 2-9: Particular requirements - Photo and film luminaries (non-professional). Part 2- l0: Particular requirements - Portable luminaries for children. Part 2-17: Particular requirements - Luminaries for stage lighting, television film and photographic studios (outdoor and indoor). Part 2-20: Particular requirements - Lighting chains. Part 2-22: Particular requirements - Luminaries for emergency lighting. Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps. Part 2-24: Particular requirements - Luminaries with limited surface temperatures. Automatic electrical controls for household and similar use - Part 1: General requirements Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements Single-capped fluorescent lamps - Safety specifications. Safety of power transformers, power supply units and similar - Part 1: General requirements and tests Part 2-1: Particular requirements for separating transformers for general use Part 2-2: Particular requirements for control transformers Part 2-4: Particular requirements for isolating transformers for general use Part 2-6: Particular requirements for safety isolating transformers for general use Part 2-7: Particular requirements for transformers for toys Part 2-8: Particular requirements for bell and chime transformers Part 2-9: Particular requirements for transformers for class III hand lamps for tungsten filament lamps Part 2-12: Particular requirements for constant voltage transformers Part 2-13: Particular requirements for auto-transformers for general use Safety of power transformers, power supply units and similar - Part 2-17: Particular requirements for transformers for switch mode power supplies. (A2LA Cert. No ) 09/08/08 Page 7 of 7