Extruded Heat Sinks. Code Nr. Page Nr. Code Nr. Page Nr. Code Nr. Page Nr. Code Nr. Page Nr. Code Nr. Page Nr. Code Nr. Page Nr.
|
|
|
- Shawn Watson
- 7 years ago
- Views:
Transcription
1 Extruded Heat Sinks ode Nr. Page Nr. ode Nr. Page Nr. ode Nr. Page Nr. ode Nr. Page Nr. ode Nr. Page Nr. ode Nr. Page Nr
2 Table of Extruded heat sinks , , , , R=1, , , ,9 6, Extruded heat sinks ,5 6, , , ,
3 , , ,
4 wide selection of extruded profiles is at your disposal in our m² fully automated warehouse. ontact our technicians to find out the aluminum profile that matches your needs. Tailor made new profiles could be developed in cooperation with our technical office. 2
5 ontents 04 Nomenclature 09 Treatments 12 Extruded heat sinks 82 ommercial ars 84 luminium lloy Properties 85 Extrusion Tolerances (EN 755-9) 89 Mechanical Tolerances (EN 22768/1) 90 Index Profiles Table 3
6 Nomenclature DISS / 200 / N / DIS. XXX Drawing Number and Revision Treatments G Only cut and washed FR Milled N lack anodized (10 μm) HN lack anodized (20 μm) H lear anodized SP rushed U Tumbled 0 lodyne 1000 (clear chromated) 2 lodyne 1200 (yellow chromated) SU Surtec 650 (chromating, Rohs compliant) ut Length Profile ode 4
7 5
8 6
9 7
10 Extrude heat sinks 8
11 Treatments Treatments: The following surface treatment processes are available: - nodizing (10-20 μm) (black, clear, coloured) - Polishing - Electrocolouring - hromating: lodyne 1000 clear; lodyne 1200 yellow, Surtec 650 (Rohs compliant) - Dust painting (every RL upon request) s well as: - Silk screening - Tumbling - Sandblasting - rushing Welding is often the right solution to: - dd frames, covers, slides to already existing profiles; - uild up very large profiles which could not be realized (or would not be convenient) by extrusion. 9
12 wide range of boxes, containers as well as cases for high frequency applications are available in our warehouse. 10
13 11
14 kg/m kg/m kg/m , ø11 27,5 2, kg/m kg/m kg/m 16 ø12 29,5 2,5 16 ø12 29,5 14 2, 5 6,5 4 10,5 1,5 12, kg/m kg/m kg/m Pin ø 2,5 Pin ø 2,2 12,5 17 1,5 17 1,5 12, ,5 34,5 25,5 34, , kg/m kg/m kg/m Pin ø 2,2 Pin ø 2,3 Pin ø 2, , , , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
15 kg/m Pin ø 2, kg/m kg/m 25,5 25,4 12 1, ,5 3 13, kg/m kg/m kg/m Pin ø 2,5 Pin ø 2, , , ,5 32 2, kg/m kg/m kg/m , , , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 13
16 kg/m kg/m Pin ø 2, , , kg/m kg/m kg/m kg/m ,5 4,5 26,5 56 3, , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
17 kg/m kg/m Pin ø 2, , , kg/m kg/m Pin ø , kg/m kg/m , ,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 15
18 kg/m Pin ø 3, ,5 2, , , kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
19 kg/m 226 7, kg/m ,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 17
20 kg/m kg/m 18,5 33,9 9 11,6 9 21,7 81, kg/m kg/m ,5 25, kg/m kg/m , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
21 kg/m O kg/m 25, , kg/m kg/m kg/m 32,5 25,5 4,7 104,7 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 19
22 kg/m kg/m , , kg/m kg/m 58 63,5 3, , ,5 5, ,5 20 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
23 kg/m , ,3 5,5 63, ,5 10,3 9,3 73, ,3 5, kg/m ,2 4,5 57 9,5 10,2 13,2 6, ,0 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 21
24 kg/m , , kg/m ,2 15,5 4, ,2 10,2 6, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
25 kg/m D D D 7 D D 13, kg/m 15, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 23
26 kg/m 108 D 27 D D 8 D D 13, kg/m 141,5 27 8,5 10 8, ,5 10 6, ,5 8,5 24 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
27 kg/m ,5 32 8, , kg/m ,5 6,3 5,5 93, ,4 5,5 10,3 12 6,3 74, ,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 25
28 kg/m kg/m kg/m 184,7 51 6,7 75 7,7 37,5 8 10, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
29 kg/m 181, ,5 9,8 7,5 72, , kg/m 33 7, ,5 8, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 27
30 kg/m ,5 20, kg/m 47,5 6, ,5 24, ,5 10, , ,5 28 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
31 kg/m kg/m 22,5 20,5 57,5 52,5 8, ,5 3 29,5 51,5 94,5 210 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 29
32 kg/m kg/m 49,4 23, ,5 23,8 18 6,5 54, kg/m kg/m 26 22,5 31,5 6, , kg/m kg/m 64, ,8 30 6, kg/m kg/m 33 32, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
33 8 Extruded heat sinks kg/m kg/m ,9 6, , ,5 21,2 6, kg/m kg/m 17, , kg/m kg/m 10 24, kg/m kg/m , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 31
34 kg/m kg/m 12,7 8 34, , kg/m kg/m ,5 12, , kg/m kg/m 11, ,1 5 34,5 5 53,5 63, ,5 32 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
35 kg/m kg/m 3,5 7 44,5 8 53,5 7, kg/m kg/m ,5 0, ,5 17,5 8 15, kg/m kg/m 2,5 32,5 5,5 41 5,5 4 9, , ,3 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 33
36 kg/m ,5 14 3, , kg/m 7, , , ,5 4, , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
37 kg/m kg/m , kg/m 94 30,7 32,5 30, ,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 35
38 kg/m ø kg/m , ,5 7,5 5 3, kg/m 27 ø Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
39 kg/m kg/m Pin ø 2, ,5 24 2,5 25, kg/m kg/m , , kg/m kg/m 32 10,5 21 9, , kg/m kg/m 11 6, ,5 20 3, , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 37
40 kg/m kg/m Pin ø , , ,5 4,5 65 3, kg/m kg/m ,5 2, kg/m kg/m 26, , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
41 kg/m kg/m , kg/m kg/m 35 35,5 14, , kg/m kg/m , ,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 39
42 kg/m kg/m , ,5 21 3, kg/m kg/m ,5 5 3, Kg/m 27 23,5 5,7 3,1 4, , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
43 kg/m 39 40,5 3, kg/m kg/m kg/m , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 41
44 kg/m ,5 5, , kg/m kg/m , kg/m 34 34,5 17, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
45 kg/m 28 88,5 75 3,5 4,5 14 6,5 35, , kg/m 105 5,2 9,5 8, ,5 8,2 12, ,2 5,2 5, kg/m 2 4,5 29, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 43
46 kg/m 29 4,5 4 8,5 33,5 17 7,5 90,5 103,5 7 4, kg/m 52, kg/m ,5 7 63,8 41, ,4 44 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
47 kg/m ,5 5, kg/m , , kg/m ,5 37,5 130 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 45
48 kg/m 34 18,5 4, kg/m 36 4, , Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
49 kg/m kg/m 18 22,9 5, , kg/m kg/m 23,5 12,7 1,5 17 2,2 7 30, kg/m kg/m 30 7,5 3 12,5 2, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 47
50 8 Extruded heat sinks kg/m kg/m kg/m kg/m 18,8 16,5 6,5 5 32,7 34, kg/m kg/m kg/m kg/m 52, , ,6 48 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
51 kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 49
52 kg/m kg/m kg/m kg/m kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
53 kg/m kg/m , kg/m 13,5 119,5 6,5 8,5 28,5 63,5 99,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 51
54 kg/m kg/m , kg/m kg/m , kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
55 kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m 2, ,5 19, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 53
56 kg/m kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
57 kg/m ,5 10,5 6, kg/m , kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 55
58 kg/m kg/m kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
59 kg/m kg/m kg/m kg/m ,5 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 57
60 kg/m , kg/m kg/m kg/m 83, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
61 kg/m ,5 212, kg/m 26, , kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 59
62 kg/m kg/m kg/m kg/m 34,5 25, ,3 60 Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
63 kg/m , kg/m kg/m kg/m Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 61
64 kg/m kg/m 67,5 11, kg/m 59,5 9, kg/m 74 5,5 10 6,5 10, Drawings scale 1:2. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
65 kg/m kg/m kg/m , kg/m Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 63
66 kg/m kg/m kg/m kg/m Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
67 kg/m , kg/m kg/m Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 65
68 kg/m 185 6, , kg/m , , ,4 5, kg/m , , Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
69 kg/m ,5 10, kg/m kg/m 138,6 48 Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 67
70 8376 ( ) kg/m kg/m ,2 190, kg/m , ( ) kg/m ,5 68 Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
71 kg/m 5,1 6 4, , , kg/m 58,6 39, ( x 8226) kg/m ,5 190, Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 69
72 kg/m 5,1 77 7,5 4,5 7, ( x 8226) kg/m kg/m kg/m 8257 ( x 8350) kg/m 31 6, ,5 10, Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
73 kg/m 8348 ( x 8350) kg/m 8 10,2 6, , , ,2 6, kg/m 8352 ( x 8350) kg/m 8 10,2 6,2 6, , ,2 6,2 150 Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 71
74 kg/m ,2 6,2 6, , ,2 6, ( x 8350) kg/m Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
75 kg/m kg/m ,6 1,5 3,6 6,2 6, kg/m kg/m 6, , ,5 7,2 5,5 3,5 4, kg/m 11, Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 73
76 kg/m kg/m 30 10,2 59, ,2 90 7,5 6,2 5, ,5 10,2 7, ,5 8,2 15 4,2 13, kg/m kg/m 60 8, , , ,5 13,2 32 9,5 12,5 10,2 5, Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
77 kg/m 30 13, ,5 8, ,5 63, , kg/m 5,3 13 5, ,5 27,5 8,3 13, ,5 8, ,5 100 Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 75
78 kg/m 83 5,5 5 8, , , kg/m , ,7 3,5 4,5 7, Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
79 kg/m ,3 5,5 8,3 4, ,5 4,2 74, kg/m ,7 5 8, ,7 10,1 5,1 74, ,7 Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 77
80 kg/m kg/m kg/m kg/m , , ,5 7,5 7 8,5 8,3 78 Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
81 kg/m kg/m kg/m Drawings scale 1:3. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 79
82 kg/m kg/m Drawings scale 1:5. Drawings details scale 1:1. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
83 81
84 ommercial ars 82 Extruded heat sinks Flat ars od. xs kg/m x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x X x x x x x x x x x x x Square ars od. x kg/m x x x x x x x x x x x x x x x10x x15x x15x x15x x20x x20x x20x x22x x25x x25x x10x x11.5x x30x x30x x20x x40x x40x x40x x40x x40x x20x x20x x50x x50x x30x x60x x60x x100x Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) L Profiles od. xhxs kg/m
85 ommercial ars L Profiles od. xhxs kg/m x30x x10x x15x x10x x10x x15x x20x x20x x10x x15x x20x x25x x10x x20x x25x x30x x30x x30x x20x x20x x30x x30x x40x x40x x25x x40x x50x T Profiles od. xhxs kg/m x30x x40x x40x x50x U Profiles od. xhxs kg/m x8x x10x x12x x15x x15x x20x x20x x30x x35x x10x x20x x10x x15x x25x x10x x15x x20x x20x x50x x20x x15x x20x x20x x25x x12x x20x x35x x50x x20x x50x x50x Tubes Rectangular Tubes od. xhxs kg/m x10x x15x x20x x20x x30x luminium oils od. S kg/m /10 H /10 H /10 H /10 H /10 H /10 H /10 H /10 H opper ars od. xs kg/m x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) D od. DxS kg/m x x x x x x x x x Square Tubes od. xxs kg/m x15x x25x x25x x30x x40x
86 luminium lloy Properties Standard material of our extruded profile is aluminium alloy W Salient properties of alloy W are listed in the tables below. hemical omposition l lloy W lloy Description Si Fe u Mn Mg r Zn Ti l mass % mass % mass % mass % mass % mass % mass % mass % mass % 6060 IMgSi remainder Min. Mechanical Properties l lloy W-6060 lloy Description Tensile strength Rm Yield strength Rp 0.2 Elasticity Modulus Hardness H N/mm² N/mm² N/mm² 6060 IMgSi Physical Properties I lloy W-6060 lloy Description Density Melting Interval Electric onductivity Thermal onductivity kg/dm³ m/ωmm² W/mK 6060 IMgSi
87 Extrusion Tolerances (EN 755-9) Dimensions of extruded profiles are subject to tolerances in accordance with standard EN (Edition pril 2001). Herebelow some tables taken from this standard. Linear Dimensions Width W Tolerance (+/-) From To mm mm mm Screw Groove D d L S Thread Diameter Groove Diameter Pitch Length D d S L mm mm mm mm
88 Extrusion Tolerances (EN 755-9) olt Nut Groove G H L Type Length Height Groove D L H G mm mm mm mm M M M M M M M M M / / / Self - Tapping Screw Groove Extruded Heat heat sinks Hole diameter Thread diameter Tolerance (+/-) mm mm mm
89 Extrusion Tolerances (EN 755-9) Planarity Hollow die Plane die T F T F W W Width W From To mm mm Max. Deviation F Hollow Die Thickness t <= 5 Thickness t > 5 Plane Die mm mm mm Torsion L T W Width W From To Tolerance on 1m length mm mm mm
90 Extrusion Tolerances (EN 755-9) ngularity Z w Width W From To mm mm Max. deviation from 90 ngle Z mm If nominal angle is different from 90, the max. deviation is +/- 1 () 88
91 Mechanical Tolerances (EN 22768/1) Machining is carried out in accordance with standard EN 22768/1 Linear Deviations ccording to EN 22768/1 Tolerances lass Max. Linear Deviation ode Description mm mm mm mm mm mm mm f Thin +/ / / / / / /- 0.5 m Medium +/ / / / / / /- 1.2 Dimensional tolerances for cutting and other mechanical works according to EN 22768/1-m (Medium). EN 22768/1-f (Thin) is applicable for N machined dimensions (holes position from 0 point, holes spacing). N milled surface properties: Planarity: 0.1 mm/m Roughness (Ra): μm Standard max thread depth: 2.5 x Thread Diameter: M3 = 8 mm M4 = 10 mm M5 = 12 mm M6 = 15 mm Whilst every effort is made to ensure the accuracy of data provided, Pada does not guarantee or accept liability for its accuracy. Do not hesitate to contact our technicians for any clarification you may need. 89
92 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power 90 kg/m mm mm /W mm W Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
93 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power kg/m mm mm /W mm W Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 91
94 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power 92 kg/m mm mm /W mm W ,0 58,0 1, Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
95 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power kg/m mm mm /W mm W Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 93
96 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power 94 kg/m mm mm /W mm W Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
97 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Lenght Power kg/m mm mm /W mm W Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 95
98 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power 96 kg/m mm mm /W mm W Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys)
99 Index Profiles Table ode Nr. Page Nr. Profile Weight Profile Width Profile Height Rth Rth Length Power kg/m mm mm /W mm W Rth values are indicative only. These values are calculated in natural convection on a raw profile placed in vertical position at given length and applied power. For further details do not hesitate to contact our technicians. Dimensions are subject to extrusion tolerances EN (luminium and aluminium alloys) 97
100 Notes 98
101 Notes 99
102 Notes 100
103 Notes 101
104 Notes 102
105 Notes 103
106 Notes 104
107 10/08 PD ENGINEERING S.r.l. Via G.. Pirelli 11 I Saltara (PU) - Italy Tel Fax pada@pada.it Web:
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
Material data sheet. EOS Aluminium AlSi10Mg. Description
EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data
RAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
Introduction 9 TABLE - 1. Wrought alloys : Near equivalent designations
Introduction 9 TLE 1 Wrought alloys : Near equivalent designations 10 Introduction TLE2 Wrought alloys : Guide to selection lloy E/1050, 1060 (1) (19501) (19500) (19600) 1100 (1) (19000) Temper Resistance
ARMSTRONG MOLD GRAPHITE DIE CASTING DIVISION
ARMSTRONG MOLD CORPORATION GRAPHITE DIE CASTING DIVISION Getting Started The Evolution of GDC The GDC technology was developed as a hybrid of traditional permanent mold, graphite mold and the die casting
Material data sheet. EOS Aluminium AlSi10Mg_200C. Description
EOS Aluminium AlSi10Mg_200C All information in this data sheet refers to the alloy EOS Aluminium AlSi10Mg_200C. This alloy is formed when the powder EOS Aluminium AlSi10Mg is processes at a building platform
Removing chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
EXTRUDED HEAT SINKS FOR POWER SEMICONDUCTORS
WTS001_p26-49 6/14/07 10:56 AM Page 45 EXTRUDED HEAT SINS FOR POWER S 621/623 SERIES Low-Profile for All Metal-Case Power Semiconductors TO-3 Footprint Thermal Performance at Typical Load Standard Dimensions
MERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
Solid shape molding is not desired in injection molding due to following reasons.
PLASTICS PART DESIGN and MOULDABILITY Injection molding is popular manufacturing method because of its high-speed production capability. Performance of plastics part is limited by its properties which
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
LED HEATSINKS Spotlight / Tracklight HighBay / LowBay Reflector ring & Housing Customized Heatsinks
LED HEATSINKS Spotlight / Tracklight HighBay / LowBay Reflector ring & Housing Customized Heatsinks THE EKL AG For 20 years now EKL AG, located at Leutkirch in the Allgau, has designed and manufactured
Die casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
EJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
UDDEHOLM IMPAX SUPREME
UDDEHOLM IMPAX SUPREME Uddeholm Impax Supreme is a premium prehardened mould steel with very good polishing and texturing properties. Uddeholm Impax Supreme is available in a very wide dimensional range,
STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
Material data sheet. EOS CobaltChrome MP1. Description
EOS CobaltChrome MP1 EOS CobaltChrome MP1 is a cobalt-chrome-molybdenum-based superalloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information
AISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
Modular Access Floor for Data Center. From Rack to Row to Room to Building
Modular Access Floor for Data Center From Rack to Row to Room to Building Why using Scneider Electric modular access floor in Data Centers The evolution of modern Data Centers emphasizes specific exigencies
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
Tubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
Solar Mounting System
Xiamen Antai New Energy Tech.Co., Ltd Installation Manual Antai Rail Solar Mounting System (Flat Roof Solution) Version 1.1 Office Add: 508#, North Tower, Guangxia Building Huli Torch Hi-tech Zone, Xiamen,
Butt Fusion Welding of HDPE Pipes Work Procedure
Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also
Chapter 2 Fractal Analysis in CNC End Milling
Chapter 2 Fractal Analysis in CNC End Milling Abstract This chapter deals with the fractal dimension modeling in CNC end milling operation. Milling operations are carried out for three different materials
Engineering & Design: Coordinate Dimensioning
s e c t i o n Section Contents NADCA No. Format Page Frequently Asked Questions (FAQ) -2 1 Introduction -2 2 Section Objectives -3 3 Standard and Precision Tolerances -3 4 Production Part Technologies
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
Master Panel 1000 W Wall
Master Panel 1000 W Wall Product Description In order to generate an aesthethic outlook wall panels are generally produced as micro hedge. Besides, in connection points concealed screw is used which provides
12.2 Compact Type, MSB Series
12.2 Compact Type, MSB Series A. Construction Upper Retainer Carriage End Cap End Seal Rail Grease Nipple Ball Lower Retainer 45 Bottom Seal 45 B. Characteristics The trains of balls are designed to a
BETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
Module 3: Sapa Extrusions Pipe, Tube and Hollow Products
Module 3: Sapa Extrusions Pipe, Tube and Hollow Products Overview: Sapa Extrusions Capabilities: Soft Alloy Custom and Standard Solid & Hollow Extrusions, Rod, Bar and Tubular Products Market focused on:
MATHEMATICS FOR ENGINEERING BASIC ALGEBRA
MATHEMATICS FOR ENGINEERING BASIC ALGEBRA TUTORIAL 4 AREAS AND VOLUMES This is the one of a series of basic tutorials in mathematics aimed at beginners or anyone wanting to refresh themselves on fundamentals.
Mounting accessories TÖBB MINT VÁLASZTÉK
96 FOR ADHESIVE DISCS The adhesive discs with various dimension and shapes are easy to use for mounting. Because of their flexible types they are suitable for sanding of flat or curving surfaces. GRINDING
PROPOSED SPECIFICATION FOR ALUCOBOND PLUS Aluminium Composite Panel Cladding System Fixed Watertight Cassette Panel System - 4mm thick
1. SCOPE OF WORK The scope of work includes the design, supply fabrication and installation of Alucobond PLUS aluminium composite panel cladding, complete with all necessary sub-structures, anchors, hardware
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
DryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
HYDRAULICS. H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long
HYDRAULICS H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long 1. General The series of channels H91.8D has been designed by Didacta Italia to study the hydrodynamic
PRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
Material data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS
Material data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
PLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
RPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130
RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,
FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
PRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
Quality Regulations for Profiles
Quality Regulations for Profiles September 2010 Quality Regulations for Profiles Page 2/42 Contents Preface... 4 1. Terms and Definitions... 5 1.1 Third parties... 5 1.2 Independent laboratories... 5 1.3
information information
Technicalinformation Technicalinformation technicalinformation SYSTEM 40C GENERAL GROPERTIES 1 Glazing: from 4 to 22 mm 2 E.P.D.M. Sealing Gasket 3 Efficent drainage of the vent section 4 Efficent chamber
Aluminium alloys Extrusions and forgings
AI Extrusions and forgings AI Extrusions and forgings Aluminium wrought alloys are the light alloys with the most balanced properties. Beside their low specific weight they may also have the following
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
Highly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
Master Panel 1000 R5 Roof
Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage
North American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
North American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
DRAFTING. Prepared by:
GTRI MACHINE SERVICES DRAFTING STANDARDS Prepared by: Machine Services Department Georgia Tech Research Institute December 16, 2011 Copyright 2011 Georgia Tech Research Corporation. Alll rights reserved.
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING Introduction The main utilization of GFRP Composites is extended to the entire field of temporary consolidation. The success of this application,
Screw Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
Unit 6: EXTRUSION. Difficult to form metals like stainless steels, nickel based alloys and high temperature metals can also be extruded.
1 Unit 6: EXTRUSION Introduction: Extrusion is a metal working process in which cross section of metal is reduced by forcing the metal through a die orifice under high pressure. It is used to produce cylindrical
WERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
SPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
SMD Power Elements Design Guide. 50 A SMD Technology Small Size High Current
SMD Power Elements Design Guide 50 A SMD Technology Small Size High Current Contents Surface Mount Technology & Assembly Surface Pad Geometry & Stencil Technical Data Qualification Reliability Test 2 www.we-online.com
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
AUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
Product Catalogue HW-B150H
Product Catalogue Content 1 Coverage and Terminology... 4 1.1 Design Standards... 4 1.2 Load Criteria... 5 1.3 Definition of Terms... 6 1.3.1 Flood Barrier... 6 1.3.2 Flood Height, effective Flood Height,
WEIGHTS AND MASS STANDARDS
WEIGHTS AND MASS STANDARDS IN ACCORDANCE WITH THE OIML R111: 2004 MADE BY WEEGTECHNIEK HOLLAND B.V. Patroonsweg 23-27 3892 DA Zeewolde The netherlands Tel. +31 (0)36-5222030 Fax. +31 (0)36-5222060 E-mail:
GK Packing System Welding Instructions
GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions
WELAND TERMINOLOGY LOAD BEARING BAR CROSS BAR GRATING TYPE SAF MESH OPENING GRATING. LENGTH, SPAN WIDTH or LENGTH OF LOAD BAR GRATING
GRATING Page Terminology 6-7 Pedestrian Walkway Multipanels from Stock 8-13 Duckboard 13 Vehicular Multipanels with Load Tables 14-15 Kerb Angle Frames 16-17 Entrance Mats 18-20 Special Grating 22 Mesh
Copper and Aluminum busbars
Copper and Aluminum busbars Two metals are currently used as conductors in electric panel boards: copper and aluminum In particular, when in need to define a power distribution inside an electric panel
DIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
PCMC063T- Power Choke Coil
PCMC063T- Power Choke Coil Features Low loss realized with low DCR 100% lead (Pb) free, RoHS compliant High performance (Isat) realized by metal dust core Low profile: 12.6mm x 13.8mm x 5.0mm Capable of
Design and Fabrication of a Wear Testing Machine
Leonardo Electronic Journal of Practices and Technologies ISSN 1583-1078 Issue 19, July-December 2011 p. 39-48 Design and Fabrication of a Wear Testing Machine Amal Ebrahim NASSAR * and Eman Ebrahim NASSAR
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
Aluminium foil properties: Applications of aluminium foils and thin gauge strips in thickness below 0,50 mm:
1 ALUMINIUM FOILS AND THIN GAUGE STRIPS The year 2010 has been celebrated as the 100th anniversary of aluminium foil. Ever since the beginning in 1910 the usage of foil has been growing and products developed
Contents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125
ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions
Ensat. Self-tapping inserts SOLID BODIES LINE
Ensat Self-tapping inserts SOLID BODIES LINE Index DESCRIPTION Page Presentation 3 Materials and Applications 4 Features 5 Preparing the receiving hole 6 Tools Codes 7 Ensat Series 302 Ensat Series 303
1000/14.02 KOBSERT. Thread inserts for metals
1000/14.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
A PRODUCT OF NEMAG HOLLAND
USER MANUAL ROPE PEAR SOCKETS SIZE: 1-17 A PRODUCT OF NEMAG HOLLAND 1. INTRODUCTION 1.1 Field of application 1.2 Technical specifications of NEMAG Rope Pear Sockets 1.3 Technical specifications of the
Appendice Caratteristiche Dettagliate dei Materiali Utilizzati
Appendice Caratteristiche Dettagliate dei Materiali Utilizzati A.1 Materiale AISI 9840 UNI 38NiCrMo4 AISI 9840 Steel, 650 C (1200 F) temper, 25 mm (1 in.) round Material Notes: Quenched, 540 C temper,
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
Understanding BS EN 771-3: Aggregate concrete masonry units
60 Charles Street, Leicester LE1 1FB Tel: 0116 253 6161 Fax: 0116 251 4568 Email: enquiries@cba-blocks.org.uk Website: www.cba-blocks.org.uk February 2006 Understanding BS EN 771-3: Aggregate concrete
Copper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
Mechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
JIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
NetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807
Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What
Aluminium and aluminium alloys Ð Extruded rod/bar, tube and profiles Ð
BRITISH STANDARD BS EN 755-7:1998 The European Standard has the status of a British Standard ICS 23.4.15; 77.15.1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aluminium and aluminium
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.