Hands-On Engineering Workshop on Solar PV Technology & Business

Transcription

1 Technology. Transfer. Training. 2 5 May 2012, The Atria Hotel, Palace Road, Bengaluru, India Hands-On Engineering Workshop on Solar PV Technology & Business Supported by: Karnataka Renewable Energy Development Limited Steinbeis Centre for Technology Transfer India /B/S/1/1 Plot No.1 (2nd Floor) Road No.10 Banjara Hills Hyderabad India Tel: , Fax: info@steinbeis,.in, tech-mktg@steinbeisindia.com A Network Centre of Steinbeis GmbH & Co. KG fur Technologietransfer, Germany, A Steinbeis Foundation Company Prestige Meridian Tower-2, 9th floor No. 30, M.G. Road Bengaluru Tel: Fax: bengaluru@ebtc.eu EBTC is a programme co-funded by the European Union and coordinated by EUROCHAMBRES.

2 Program Outline Day-1 (2 May 2012): Review of Solar PV Technology & Business Introduction: Review of types of Solar Power Systems and major system components: Introduction to Off Grid / Stand Alone Systems; Different Components in the System (inverters, battery ); Introduction to large scale Utility Plants ; Diesel generator Back Up Review of the NEC Codes used for Design: Different Codes Used, scope and Purpose of NEC, Safety Measures Adopted, testing and Approval procedures, Materials used (According to the code) Components Used for Plant, Electrical and mechanical properties: Design of the PV Modules used, Mechanical Structures Used, batteries & Charge Controllers (Only for Stand Alone Systems), String Combiner Box, Inverters (Grid Connected, Stand Alone), SCADA System, Power System monitoring, Protection Equipments. Financial Analysis: Different Financial Aspects of a Solar Power Plant, JNNSM Scheme, Possibilities of funding From MNRE, Payback Calculation, Maintenance Cost Analysis, Analysis using SAM (Solar Advisory Model) Software Solar PV Technologies: Presentations by European Experts / Organisations Day-2 (3 May 2012): - System Design Concepts Design of Stand Alone Systems: System Sizing, Wire Sizing, NES Code, Designs for fuse and Ground, Load Calculations, Design of Batteries, Inverter Sizing, Charge Controller Characterization, Examples, Case Studies Design of Grid Utility Plants: Different Aspects considered for Designing, Calculation of Land Area, Design of Strings, Shading Analysis, String Monitoring, Wire Sizing, Fuse Sizing, Ground Conductor Sizing, Inverter Sizing, Design of Protection Equipment, Connection to Grid, Analysis of Power Quality, SCADA Software Analysis: PV SYST Designing of a Utility Power Plant, PV SYST Simulation of Stand Alone Systems, Grid Connected System Design using PV SOL Solar PV Technologies: Presentations by European Experts / Organisations Individual Exercises for Participants Day-3 (4 May 2012): - Hands-On Engineering Workshop Grid Connection & Stand Alone Systems: Roles of Supplier and Project Implementer Preparation of quotations for Project Queries Approaching a Project Query and methods to reply for it Writing Project proposals How to approach A Incoming Proposal Writing Proposals to government Tenders and Quotations for Government Off-Grid Workshop (For 2 Groups) - Group-1: OffGrid System Supplier & Project Implementor, Group-2: OffGrid System Client: Mock Case on Off-Grid System Enquiry, Quoatation & Project Implementation Plan On-Grid Workshop (For 2 Groups) - Group-3: On-Grid System supplier & Project Implementor, Group-4: OnGrid System Client; Mock case on OnGrid System Enquiry, Quotation & Project Implementation Plan

3 Program Outline (Contd ) Solar Lighting Workshop (For 2 Groups) - Group-5: Solar Lanterns & Streetlight Supplier & System Integrator, Group-6: Pvt. / Govt. Clients for Solar Lanterns & Street Lights: Mock case on Solar Lanterns and Street Light Enquiry for a village, making offers and Project Implementation Plans Day-4 (5 May 2012) 1. Group Presentations 2. General Discussions & Guest Lectures CEO s of European Firms in India 3. Workshop Certification Test 4. Galileo Master Certification Test (optional) 5. Distribution of Certificates MAIN FACULTY Mr. Nivas Vallavan Mr. Nivas Vallavan is a research scholar at Institute for Energy Studies, Chennai. He is also a consultant for a few companies in Chennai and Bangalore where he is working on designing Solar Plants of various capacities. He has designed plants from kw to 1 MW. He has also conducted various training programs on EPC, Research on Solar, Solar Simulation Softwares etc. Mr. N R Rao Mr. N R Rao has been associated with solar photovoltaic industry for more than 30 years. He has successfully headed a Solar P V Modules and BOS component Manufacturing and Systems Integration Company in the Middle East for 20 years. Under his leadership, the company has designed, installed and commissioned several challenging projects for Telecom, Oil & Gas Industry, Defense and other Government organizations in different countries. In Saudi Arabia, he worked as an Electrical Engineer for Saudi Arabian National Centre for Science and Technology. During this period he was actively involved in the 100 million dollar Solar Energy Research Program ( ) between United States and Saudi Arabia. Under this program, the World s first 350 KW Concentrated Photovoltaic Power Plant with 3.4 Megawatts of D G capacity having standalone / hybrid / grid interactive modes of operation feeding power to three remote villages near Riyadh, Saudi Arabia was installed. The plant with the advanced technology is fully computer controlled with data acquisition system recording real time data for research. He was actively involved in installation, operation and maintenance of the plant. He worked closely with several International Organizations and co-authored and presented technical papers in International Seminars. He was actively involved in the establishment of Solar Energy Laboratory and trained young Engineers / Technicians. In India as an independent consultant, he has designed, installed and commissioned the country s first grid connected rooftop P V Power Plant (5 KW Peak) for Engineering Staff College of India. He has also installed several P V Systems for BHEL and CEL. As a consultant to Engineering Staff Collage of India, he has conducted training programs in Solar P V Technology for Managers and Engineers. He is presently engaged as Technical Advisor / Project Consultant to companies in PV industry. He is an Electrical Engineering graduate from JNTU Hyderabad and formerly worked with South Central Railway and A P State Electricity Board.

4 Steinbeis Centre for Technology Transfer India Services International Technology Consulting, Scouting, Development, Evaluation & Transfer (including licensing, one time transfer, Joint Ventures, Collaborations etc. Training & Employee Development (Technical and Management) Industry Interfacing Services for Professional Institutions (Opening joint Technology Centres) Expertise Areas Automotive Engineering Machine Tools & Manufacturing Technologies Renewable Energy Technologies Embedded Design, Networking & Wireless Communication Technologies Aviation & Aerospace Technologies Water & Environment Technologies The (EBTC) supports EU cleantech companies and researchers on their market entry to India by offering hands-on support through a wide range of services, focusing on 4 key sectors Biotech, Energy, Environment and Transport all of which offer enormous scope for closer EU-India collaboration be it in business or research.. EBTC identifies opportunities and needs within the Indian market for clean technology, and offers complete end-toend solutions to European clean technology companies who want to enter and ensure longevity in the Indian market. Through cooperation with government bodies, associations, and an extensive network of professional bodies across India and Europe, EBTC is conveniently located in New Delhi, Kolkata, Bengaluru and Mumbai, and is well equipped to provide a range of customized and personalized services catering to the requirement of each individual client. PAST PROGRAMS Steinbeis-UL Certificate Training Program on Solar PV System Installation January 2011, Hyderabad Steinbeis Renewable Energy School, Certificate Course on Solar PV Business & Technology Management August 2011, Hyderabad Steinbeis Certificate Training Program on Solar PV System - Electrical System Design, Earthing & Lightning Protection Nov. 2011, Hyderabad

5 REGISTRATION FORM Hands-On Engineering Workshop on Solar PV Technology & Business 2-5 May 2012, The Atria Hotel, Palace Road, Bengaluru (For Engineering Professionals with basic knowledge of Solar PV Systems) I (name) wish to register for the above Training Program. Please find attached a one-page write-up on Status of Solar PV in India (written on your own) and your expectations from the Training Program. Please find attached the participation fees by a Demand Draft / by Online Transfer towards course fees to Steinbeis Centre for Technology Transfer India payable at Hyderabad. PARTICIPATION FEE Includes - Training Fees, Course material, Working lunch on training days Amount (Exclusive of Service Tax) (Please tick the relevant boxes) Participation Fees per Participant Discounted fees for final registrations (including payments before 15th April 2012) Fees for Galileo Master Certification Exam (in addition to the fees indicated above) Fees for Industry Participants Fees for Engineering Students Fees for Engineering Faculty & Individual Consultants 20,000/- 15,000/- 17,500/- 17,500/- 12,000/- 15,000/- 4000/- 4000/- 4000/- Name: Organisation: Phone / Fax / / Website: (Fees once paid are non-refundable. All decisions af the organizers are final and binding) Please Reply to: Ms. Sreedevi, Sr. Executive Technology & Innovation Steinbeis Centre for Technology Transfer India /B/S/1/1 Plot No.1 (2nd Floor), Road No.10 Banjara Hills, Hyderabad India tech-mktg@steinbeisindia.com, info@steinbeis.in T : , M: Signature of the Participant Mr. Harsha Lingam, Business Development Executive Prestige Meridian Tower-2, 9th Floor, No.30 M G Road, Bengaluru, T: , Fax: bengaluru@ebtc.eu,