Description. Features. Kingbright. Applications. *Video cameras
|
|
|
- Alaina May
- 7 years ago
- Views:
Transcription
1 AMBIENT LIGHT PHOTO SENSOR Package Dimensions Part Number: KPS-3227SP1C Description The KPS-3227SP1C is a NPN silicon phototransistor, It is a good effective solution to the power saving of display backlighting appliances and the device is sensitive to the visible spectrum. Notes: Features *Lead-free package. *Component in accordance with RoHS. *Adapted to human eye responsive. *Wide angle of half sensitivity. *Moisture sensitivity level : level 3. * Package:2000 pcs/ Reel. Applications Detection of ambient light to control display backlighting in: *Mobile phones *PDAs *Note books *Video cameras 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1 (0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. *Absolute Maximum Ratings(Ta=25 C ) Parameter Symbol Rating Unit Notice Collector Emitter Voltage V ceo 60 V Iceo=100μA Emitter-Collector Voltage V eco 4 V Ieco=100μA Operating Temperature Topr -40 to +85 ºC - Storage Temperature Tstg -40 to +85 ºC - Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAG5419 REV NO: V.13 DATE: JUN/10/2016 PAGE: 1 OF 5
2 *Electrical and Optical Characteristics (Ta=25 C) Parameter Symbol Value Min. TYP. Max. Unit Conditions Collector Emitter Breakdown Voltage BVceo V Iceo=100μA Emitter Collector Breakdown Voltage BVeco V Ieco=100μA Collector dark current I D na V CE =5V E V =0Lx Light Current(1) I PH1-6 - μa V CE =5V,Ev=100 Lx [1] Light Current(2) I PH μa V CE =5V,Ev=1000 Lx [1] Light Current(3) I PH μa V CE =5V,Ev=1000 Lx [2] Light Current(4) I PH μa V CE =5V,Ev=1000 Lx [3] Saturation Output Voltage Vo V V CC =5V,E V =1000Lx [1], R L =75KΩ Peak Wavelength λp nm - Response Wavelength λ nm >10% Response Collector Emitter Saturation Voltage V CE (sat) V I C =10 ma Notes: 1. White Fluorescent light (Color Temperature = 6200K) is used as light source. 2. Luminance by CIE standard illuminant-a/2856k,incandescet lamp. 3. Sunlight (Color Temperature = 4600K) is used as light source. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. SPEC NO: DSAG5419 REV NO: V.13 DATE: JUN/10/2016 PAGE: 2 OF 5
3 SPEC NO: DSAG5419 REV NO: V.13 DATE: JUN/10/2016 PAGE: 3 OF 5
4 KPS-3227SP1C Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5419 REV NO: V.13 DATE: JUN/10/2016 PAGE: 4 OF 5
5 PACKING & LABEL SPECIFICATIONS KPS-3227SP1C Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by. 6. All design applications should refer to application notes available at SPEC NO: DSAG5419 REV NO: V.13 DATE: JUN/10/2016 PAGE: 5 OF 5
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
EVERLIGHT ELECTRONICS CO., LTD.
ECN : PAGE : 1/7 Features : Fast response time High photo sensitivity Small junction capacitance High reliability Description : is a high speed silicon NPN epitaxial planar phototransistor in a compact
Ambient Light Sensor DIP 5mm T-1 3/4 EAALST05RDMA0
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Guaranteed
Ambient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
Silicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
Reflective Optical Sensor with Transistor Output
TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
0.28" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-281XSB
.28" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-281XSB Spec No.:W2841C/D Rev No.: V.2 Date:Sep/3/29 Page: 1 OF 6 Features:.28 (inch) digit height. Excellent segment uniformity.
Technical Data Sheet 2.0*5.0mm Rectangle Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
Reflective Optical Sensor with Transistor Output
www.vishay.com TCRT, TCRT Reflective Optical Sensor with Transistor Output 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x
EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
3.0mm (1.2") 8 8 Hyper Red Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XVB
.mm (.") Hyper Red Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-XVB Spec No: WA/B Rev No: V. Date:Sep// Page of Features:.inch (.mm) Matrix height. Colors: Hyper Red. Flat package and light
Reflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E
Technical Data Sheet 3.0mm Round Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free Descriptions : The series is specially designed for applications requiring higher brightness The led
3.0*3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-R30881XUYB
3.*3.mm (.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-R388XUYB Spec No: W288A/B Rev No: V.2 Date: Sep/8/27 Page: OF 6 Features:.2inch (3.7mm) Matrix height. Colors:Super
Luckylight. 3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XUYB
3.mm (.") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-388XUYB Spec No: W88A/B Rev No: V. Date:Sep/3/8 Page: OF 6 Features:.inch (3.mm) Matrix height. Colors: Super Yellow.
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor
Luckylight. 1.9mm (0.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-20882XWB-Y
.9mm (.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-88XWB-Y Spec No: W88C/D Rev No: V. Date: Sep// Page: OF Features:.8inch (.mm) Matrix height. Colors: White. Flat package
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Silicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
Silicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
How To Use A Kodak Kodacom 2.5D (Kodak) With A Power Supply (Power Supply) And Power Supply
Reflective Optical Sensor with Transistor Output Description The CNY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence
Luckylight. 60.20mm (2.4") 8 8 RGB color Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-50884XRGBB
6.2mm (2.4") RGB color Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-54XRGBB Spec No: W23A/BRGB Rev No: V.2 Date:Sep//29 Page: OF 9 Features: 2.4inch (6.2mm) digit height. Excellent segment
3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Preliminary. 5mm Round White LED T-1 3/4 Technical Data Sheet. Model :LL-504WC2E-W2
Preliminary 5mm Round White LED T-1 3/4 Technical Data Sheet Model :LL-504WC2E-W2 Spec No: ITO-ET00N Rev No:V.1 Date: Dec/05/2004 Page: 1 OF 10 Features Popular T-1 3/4 diameter package. Choice of various
Transmissive Optical Sensor with Phototransistor Output
TCST11. up to TCST23. Transmissive Optical Sensor with Phototransistor Output Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face
703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
rred.com ieverred.com
1Features/ Emitting Color/Green/ Lens Type/Water Clear/ Device Outline/3.52.81.9mm RoHS compliant/ RoHS 2Applications/ Backlight for MobileMachine Vision LCD Display/ Backlight in Dashboard and switch
Optocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11)
TOSHIBA LED Lamps TL(RK,RMK,SK,OK,YK)C(T) TLRKC(T), TLRMKC(T), TLSKC(T), TLOKC(T), TLYKC(T) Panel Circuit Indicators Unit: mm Surface-mount devices.2 (L) mm 2.8 (W) mm.9 (H) mm Flat-top type InGaAlP LEDs
3528 SMD LED. Applications. Signal & Symbol Indicators. Illuminations(illuminated advertising & general lighting). Amusement Machines.
Applications Signal & Symbol Indicators. Illuminations(illuminated advertising & general lighting). Amusement Machines. LCD Backlighting. Indoor & Outdoor Displays. Automobile Interior Lighting. Edition:
SPECIFICATION FOR APPROVAL
LED Model No: WSD-5050A120RGBW-02 5050-RGBCW Commodity: Emission Color:RGB+Cool 5050 RGB+Pure SMD White Model Lens No: Appearance: 5050-RGB Water Clear Quality CUSTOMER & Safety APPROVED Certification:
Technical Data Sheet 5.0mm Round Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
Silicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
Power SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
Ultrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
Silicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
Optocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
Standard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
: 5050 White LED PKG. Specification Sheet
5050 White LED PKG Specification Sheet For General Lighting 1 / 12 _ 5050 White LED Specification Sheet Approved rank specification for NC LED Iv: Min 5,000mcd (500mcd Sorting) Vf: 3.0 ~ 3.4V (0.1V Sorting)
TLP281,TLP281-4 TLP281,TLP281-4 PROGRAMMABLE CONTROLLERS AC/DC-INPUT MODULE PC CARD MODEM(PCMCIA) Pin Configuration (top view) 2007-10-01
TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR,-4,-4 PROGRAMMABLE CONTROLLERS AC/DC-INPUT MODULE PC CARD MODEM(PCMCIA) Unit in mm and -4 is a very small and thin coupler, suitable for surface mount
DOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
Edixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
UV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
Optocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
Technical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength p=85nm 2.54mm Lead spacing Low forward voltage Pb free HIR24 Descriptions EVERLIGHT s infrared
Edixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
SPECIFICATION. PART NO. : MT0380-UV-A 5.0mm ROUND LED LAMP. 3Northway Lane North Latham,New York 12110.
3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. : MT0380-UV-A LAMP ATTENTION OBSERVE PRECAUTION
5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
Optocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
T5050M-MCL1 High Power Mixing Color LED
PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.
APPLICATION NOTES for THROUGH-HOLE LEDs
APPLICATION NOTES for THROUGH-HOLE s STORAGE CONDITIONS 1. Avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature. 2. s
Nichia STS-DA1-0774 <Cat.No.090427> SPECIFICATIONS FOR NICHIA UV NSHU591B MODEL : NICHIA CORPORATION
SPECIFICATIONS FOR NICHIA UV LED MODEL : NSHU591B 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 25 ma Pulse Forward Current IFP 80
Harvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package
Optocoupler, Phototransistor Output, FEATURES High BV CEO, 70 V Vishay Semiconductors i79002 A K NC NC 2 3 4 8 7 6 5 NC B C E Isolation test voltage, 4000 V RMS Industry standard SOIC-8A surface mountable
Cree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
IN1M101 Precision AC Brown-out Supervisor IC
Precision AC Brown-out Supervisor IC Rev.1.1 03 30 2011 Specification General Description provides a precise comparator to detect the rectified AC voltage, which could protect the SPS when AC voltage is
Cree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
1W High Power LED. Features. Applications. Catalog
Features Highest flux per LED family in the world Very long operating life (up to 100k hours) Available in Red, Yellow, Green, Blue, White Lambertian radiation pattern More energy efficient than incandescent
Cree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
Optocoupler, Phototransistor Output, With Base Connection
IL/ IL2/ IL5 Optocoupler, Phototransistor Output, With Base Connection Features Current Transfer Ratio (see order information) Isolation Test Voltage 5300 V RMS Lead-free component Component in accordance
Cree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
Lumimicro 3528 One Chip Specification
Doc. No : LUMI 3528-2P- 05 08 17- SPEC 3528-2PIN-SMD LED White LED Customer Approval Model Issued Date LMFL2P35A1WHZ03 2005 08-17 Checked By Approved By Description SMD Type LED Written By Checked By Approved
Specification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
Optocoupler, Phototransistor Output, with Base Connection
HA/HA2/HA3/HA4/HA5 FEATURES Interfaces with common logic families Input-output coupling capacitance < pf Industry standard dual-in line 6-pin package A C NC 2 3 6 5 4 B C E Isolation test voltage: 5300
Reflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output Description The NY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence
Data Sheets of AVA Technology SMD Type White LED. Model : T5050. AVA Technology Co.
Data Sheets of AVA Technology SMD Type White LED Model : AVA Technology Co. 2640 S. Myrtle Ave. Suite 6 Monrovia, CA 91016 P: 626-574-7726 F: 626-574-7732 http://www.led4light.com Top View LED with Reflector
SPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.
SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial
Tube Liquid Sensor OPB350 / OCB350 Series
Features: Can identify if liquid is present in clear tubes that have an outside diameter of 1/16 [1.6mm], 1/8" [3.2mm], 3/16" [4.8 mm] or 1/4" [6.3 mm] Opaque plastic housing enhances ambient light rejection
MP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
LUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
Low Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
PART NO.: L-C150SRCT REV: A / 4
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
BPW34. Silicon PIN Photodiode VISHAY. Vishay Semiconductors
Silicon PIN Photodiode Description The is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement of TO-5
Product family data sheet
Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top
SMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
Cree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
Cree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA
Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package
Cree PLCC4 3 in 1 SMD LED CLV1L-FKB
Cree PLCC4 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1238.005 PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020
2SA12 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA12 Power Amplifier Applications Power Switching Applications Unit: mm Low Collector saturation voltage: V CE (sat) =.5 V (max) (I C
IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications
IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications MECHANICAL DATA Pinning: = OUT, 2 = GND, 3 = V S 2 3 6672 APPLICATIONS Reflective sensors for hand dryers, towel or