Office, Shop & Bed Fittings

Transcription

1 Office, Shop & Bed Fittings Tracks Bortoluzzi Flush Door Track Systems... 2 Top-Hung Sliding Door Hardware... 8 Interior Bi-Fold Door Hardware Bottom-Roller Door Hardware Bottom and Top-Roller Door Hardware Sliding Showcase System Interior Sliding Glass / Panel Tracks O O : 1

2 Tracks Bortoluzzi Flush Door Track Systems Slider S System - Wall Flush mounted sliding system with soft close A versatile system for walls, floors and cupboards Made and designed in Italy A patented system for most applications Available in set widths, heights are dependant on weight capacity Door weight capacity of 15kgs Upper slide track with brackets for the doors Lower guide runner Left and right drive shafts, preassembled 2 couples for wings, hexagon tool, adhesive bump-ons Location: Wall Description Cabinet Width Door Size Code Slider S Track Kit 1200mm 600mm Slider S Track Kit 1800mm 900mm Slider S Track Kit 2400mm 1200mm COD LT LA HT HI HA SPA SPAM SPB SPC SPE SPI SAB SAC SAE RM RAS Description Of Variables Total width of cabinet Width of door Total height of interior of cabinet Height of interior of cabinet Height of door Thickness of door Thickness of door + handle Thickness of bottom panel Thickness of top panel Thickness of side panel Thickness of centre panel Superimposition of door on bottom panel Superimposition of door on top panel Superimposition of door on side panel Recess of handle from edge of door Recess of door from structure Minimum space mm. 35 for fastening and adjusting O : 2 Dimension data and specifications may change without notification.

3 Bortoluzzi Flush Door Track Systems SPE LT SPI SPE SAE RM RM SAE LA 4 LA Customers will be provided with: Upper slide track with brackets for the doors Lower guide runner Angles supporting the upper slide track (for versions 1and 2 only) Left and right drive shafts in preassembled or compoundable version. 2 blisters including the couples of adjustment systems for wings, 13 mm hexagon wrench and 4 self adhesive bumpers. 39+SAE-SPI/ O : 3

4 Tracks Bortoluzzi Flush Door Track Systems Slider S System - Floor Flush mounted sliding system with soft close A versatile system for walls, floors and cupboards Made and designed in Italy A patented system for most applications Available in set widths, heights are dependant on weight capacity Door weight capacity of 15kgs Upper slide track with brackets for the doors Lower guide runner Left and right drive shafts, preassembled 2 couples for wings, hexagon tool, adhesive bump-ons Location: Floor Description Cabinet Width Door Size Code Slider S Track Kit 1200mm 600mm Slider S Track Kit 1800mm 900mm Slider S Track Kit 2400mm 1200mm COD Description Of Variables 3 SPA LT Total width of cabinet SPC SAC LA HT Width of door Total height of interior of cabinet 68 SPAM HI HA SPA Height of interior of cabinet Height of door Thickness of door 142 SPAM Thickness of door + handle HI SPB Thickness of bottom panel HT HA SPC Thickness of top panel SPE Thickness of side panel SPI Thickness of centre panel SAB Superimposition of door on bottom panel SAC Superimposition of door on top panel SPB SAE RM Superimposition of door on side panel Recess of handle from edge of door RAS Recess of door from structure * 185 Minimum space mm. 35 for fastening and adjusting O : 4 Dimension data and specifications may change without notification.

5 Bortoluzzi Flush Door Track Systems Customers will be provided with a kit including: Lower slide track with doors brackets for wings Upper guide runner in MDF (one piece or two-piece slide) Blister including the couple of adjustment systems, the upper bracket for the left wing, 13mm hexagon wrench and 4 self adhesive bumpers. Blister package including two adjusters and the upper bracket for the right door LT SPE SPI SPE SAE RM RM SAE LA 4 LA With one-piece upper runner: door opening With two-piece upper runner: door opening 17+SAE-SPI/2 38+SAE 3 4 O : 5

6 Tracks Bortoluzzi Flush Door Track Systems Slider M System - Floor Flush mounted sliding system with soft close A versatile system for walls, floors and cupboards Made and designed in Italy A patented system for most applications Available in set widths, heights are dependant on weight capacity Door weight capacity of 35kgs Upper slide track with brackets for the doors Lower guide runner Central and side plates for lower guide for left and right wings Adjusting systems for wings, M5 bushes, M5 Screws, adhesive bumpers, hexagon and fixing tools Location: Floor Description Cabinet Width Door Size Code Slider M Track Kit 1200mm 600mm Slider M Track Kit 1800mm 900mm Slider M Track Kit 2400mm 1200mm COD LT HT HI SPA SPAM SPB SPC SPE SPI SAE RM RAS AA DYPL DXPL BASE DAMP Description Of Variables Total width of cabinet Total height of interior of cabinet Height of interior of cabinet Thickness of door Thickness of door + handle Thickness of bottom panel Thickness of top panel Thickness of side panel Thickness of centre panel Superimposition of door on side panel Recess of handle from edge of door Recess of door from structure Central shoulder-wing distance when open Side-foot distance in depth Feet room on side Lower guide fixing from within the cabinet Montage Amortized wing retraction Minimum gap for lower plate fixing mm 35 O : 6 Dimension data and specifications may change without notification.

7 Bortoluzzi Flush Door Track Systems Central foot Side foot Side foot Customers will be provided with: a) Case including Upper slide track with brackets for the doors MDF lower sliding guide Central and side plates for lower guide for left and right wings N 2 blisters including adjusting systems for wings, n 4 special M5 bushes, n 4 TBEI M5 screws, n 4 self-adhesive bumpers, n 13mm hexagon wrench and n 1 10mm fixed wrench. O : 7

8 Tracks Top-Hung Sliding Door Hardware Door Specification Maximum weight 30kg each door Maximum door width 1500mm Minimum door thickness 25mm *164 pelmet (optional) 160 TRACK Sprint 30 Application Suitable for interior top hung sliding doors. Ideal for residential situations where economy is of major importance. Suitable for a single door or two doors on a bi-parting installation. (door width limits apply) Suits lightly constructed timber framed doors of flush or panelled construction. The track is sidewall fitted with provision for a hook-on pelmet. All screws are the same size and length for quick selection and easy installation. * Standard Sets Standard sets are available for sliding one door. Sets comprise track, 2 hangers, 2 door stops, sawcut guide, all screws and installation instructions. Type Max. Door Width Track Length Hardware for Code SP3 900mm 1600mm 1 Door SP5 1500mm 2440mm 1 Door ADDITIONAL FITTING PACK Additional fitting pack available for use with SP5 set for bi-parting doors each 720mm max. width. Type Pack Content Code SP1 2 Sliders, 3 Guides, 1 Door Stop and all Screws Track Galvanised Steel No.161 Hanger (2 per set) No.163 Door Stop (2 per set) No.101N Guide O : 8 Dimension data and specifications may change without notification.

9 Top-Hung Sliding Door Hardware Slipper 9 Application For built-in furniture, kitchen cabinets, serving hatches, shop fixtures. For two or three bi-passing, within the opening, on two parallel tracks. For two door bi-parting, clear of the opening, on one line of track. Slipper requires only 13mm headroom. No bottom channel required in the threshold. Simple to remove the door for cleaning or decorating. The door merely hooks off the track once the guides have been unscrewed. Standard Sets Standard sets are available for bi-passing or bi-parting doors. Sets comprise 2 tracks, 4 sliders, 3 guides, 1 door stop, all screws and installation instructions for two doors. Type Opening Width Max. Door Width Hardware for Code SS3 900mm 456mm 2 Doors SS4 1200mm 606mm 2 Doors SS5 1500mm 756mm 2 Doors SS6 1800mm 906mm 2 Doors SS8 2400mm 1206mm 2 Doors ADDITIONAL FITTING PACK Additional door pack available for adding one more door on above sets. Type Pack Content Code SS1 2 sliders, 3 guides, 1 door stop and all screws ADDITIONAL COMPONENTS Type Description Code No.28N Door Stop No.131 Slipper 9 Slider only No.132 Slipper 9 Guide only No.130 Track Aluminium (2 per set) No.131 Slider (4 per set) No.28N Door Stop No.132 Door Guide (3 per set) O : 9

10 Tracks Top-Hung Sliding Door Hardware Door Specification Maximum weight 75kg Maximum door height 2400mm Minimum door thickness - 16mm with face plate hanger, 25mm with top plate hanger Husky 75 Application Suitable for interior or exterior top hung sliding doors. If fitted on exterior, the top track must be protected with a canopy. Ideal for residential, commercial or light industrial sliding doors. Versatile design allows the opening to be covered by any number of doors. When a door slides more than twice its width, a continuous channel must be fitted in the floor and two guides fitted on to the bottom rail of the door. The track may be fitted directly beneath the lintel, in single or multiple lines, or face fitted to the lintel using single line brackets. Standard Sets Standard sets comprise of fittings, steel track, all screws and installation instructions. Type Min. door width Max. Door Width Qty Brackets Code H3 610mm 900mm H4 915mm 1220mm H5 1220mm 1525mm ADDITIONAL FITTING PACK Additional fitting pack available for door 20mm min. thickness, pack comprises of 2 x 284H Hangers, 2 x door stops, 101N guide, spanner, all screws and fitting instructions. Type Pack Content Code H1 Fittings, tool, all screws and instructions TRACK ONLY Type Track Length Brackets Required Code mm mm mm mm mm ADDITIONAL HUSKY COMPONENT Type Description Code NO.101N Sawcut Guide (Nylon) No.284H 284 Husky Hanger with 20mm Wide Top Plate No.280 Track Galvanised steel No.281 Bracket No.284H Hanger (2 per set) No.287 Stop (2 per set) No.101N Guide No.320 Spanner O : 10 Dimension data and specifications may change without notification.

11 Top-Hung Sliding Door Hardware Single Top 27 Application For built-in furniture, wardrobes, cupboards, etc. in residential or light commercial applications. By combining Single Top and Double Top, multiple line applications can be achieved. Standard Sets Standard sets comprise top track, 2 hangers, door stop, sawcut guide, all screws and installation instructions. Type Opening Width Track Length Hardware for Code ST4 600mm 1200mm 1 door ST5 750mm 1500mm 1 door ST6 900mm 1800mm 1 door Door Specification Maximum weight 27kg each door Door Thickness - Single Top 27 16mm min - Double Top mm Double Top 27 TRACK ONLY Type Track Length Code mm mm mm mm mm mm DOUBLE TOP 27 FITTING PACK Door fitting pack available for adding door(s) with above tracks. Fitting packs comprise of hangers, door stop and guide. Type Pack Content Code 1W One door pack of fittings for use with above tracks W Two door pack of fittings for use with above tracks DOUBLE TOP 27 COMPONENTS [SOLD SEPARATELY]. Type Description Code No.220 Hanger - White Ballrace Wheel No.221 Hanger - Coloured Ballrace Wheel No.222 Hanger - Reversible Ballrace Wheel No.28N Door Stop (Nylon), including Screws No.101N Sawcut Guide (Nylon), including Screws SINGLE TOP 27 STANDARD SET 27 Single Track Aluminium No.220 Hanger with White Wheel No.28N Door Stop No.101N Guide O : 11

12 Tracks Interior Bi-Fold Door Hardware Door Specification Maximum leaf weight 16kg Minimum leaf thickness 19mm Maximum leaf height mm for 19mm thick door or 2400mm for 29mm thick door Maximum leaf width 620mm Bi-Fold 16 Application: Suitable for residential and light commercial wardrobes and cupboard folding doors. Ideal for use on openings with non-rebated jambs as only simple framing at the head is required to take the top track. The pivot arrangement allows the leaves to fold open to about 100 degrees, allowing unhindered access to over 90% of the opening. No bottom guide channel is necessary. Interior use only. Standard Sets Standard sets for two leaves comprise track, top pivot socket, bumper, top and bottom pivots, jamb bracket, top guide, three No. 822 hinges, spanner, all screws and fitting instructions. Type Opening Width Hardware for Code B32 Up to 915mm 2 Leaves B42 916mm to 1250mm 2 Leaves B mm to 1830mm 2 Leaves Pivoted to Both Sides B mm to 2500mm 2 Leaves Pivoted to Both Sides Track Coated Steel (Brown) No.810 Top Pivot Socket No.813 Bumper No.801 Top Pivot and Guide No.807 Bottom Pivot No.811 Jamb Bracket Top Pivot Socket No.804 Floor Bracket No.822 Hinge x3 No.808 Aligners No.320 Spanner O : 12 Dimension data and specifications may change without notification.

13 Interior Bi-Fold Door Hardware Triumph Stealth Application Concealed Bi-Folding Door Track System Wrap around aluminium track - available in Mill finish and Clear Anodised Nylon tyred wheel with lubricated steel ball bearings - for smooth guide operation Hinge Bracket on Wheel Assembly suits clip-on concealed hinges Suits door thicknesses of 16mm to 25mm Ideally suited to doors up to 1000mm high but may be adapted to suit doors up to 2100mm high (additional hinges required) Specially designed Centre Hinges allow for accurate door alignment Maximum recommended leaf width 600mm Hinge Requirements Up to 1000mm high - 2 Hinges 1000 to 1500mm high - 3 Hinges 1500 to 2000mm high - 4 Hinges 2000 to 2100mm high - 5 Hinges 24mm TT320 Track 30mm Type Description Code P385 2 Leaf Components pack for up to 1000mm high door TT320 Aluminium Track - 1.5m - Mill Finish TT382 Centre Hinge O : 13

14 Tracks Interior Bi-Fold Door Hardware Scorri Bi-fold Bi-Fold door system, suitable for interior folding hinged doors. TRACK ONLY mm Length Type Description Code ART1030 SCORRI Top Track - Aluminium ART20 SCORRI Bottom Track - Aluminium SCORRI BI-FOLD COMPONENTS Type Description Code ART882 SCORRI Bi-Fold Hanger ART886 SCORRI Bi-Fold Bottom Guide ART879 SCORRI Bi-Fold Hinge ART1030 Top Track Aluminium ART20 Bottom Track Aluminium ART882 SCORRI Bi-Fold Hanger ART886 SCORRI Bi-Fold Bottom Guide ART879 SCORRI Bi-Fold Hinge O : 14 Dimension data and specifications may change without notification.

15 Interior Bi-Fold Door Hardware Multifold 25 Application Suitable for residential and light commercial folding partitions. (Interior use only) Leaves can be either end folding or centre folding. Leaves can fold to one or both sides of the opening. Pivot hardware enables an end folding internal partition to be designed using standard width door leaves with no need to reduce the width of the leaf adjacent to the jamb. A guide system access the floor must be used on end folding units of 4 leaves or more in excess of 450mm wide or 15kg per leaf. Door Specification Maximum weight 25kg each leaf Maximum leaf width 620mm Leaf thickness 19mm Maximum leaf height 2400mm Standard Sets Standard sets comprises of 1 of each top pivot assembly, bottom pivot, jamb bracket, hanger, bumper, spanner, 3 hinges all screws. Type Content Hardware for Code MF2-B 2 Door Pack 2 Leaf MF4 4 Door Pack 4 End or 3.5 Centre Folding Doors TRACK ONLY Type Track Length Brackets Required Code mm mm mm mm mm No.822 Hinge (3 per set) No.807 Bottom Pivot No.255 Bumper No.91 Bracket No.218 Top Pivot No.284S Hanger No.320 Spanner 90 Track Aluminium O : 15

16 Tracks Bottom-Roller Door Hardware Door Specification Maximum weight 25kg Maximum door width 900mm Minimum door thickness 16mm Timberoll 25 Application Suitable for interior sliding timber doors to cupboards, bookcases, built-in furniture and other good quality cabinet work where quiet, smooth action is required. Standard Sets Standard sets are available for bi-passing doors. Sets comprise 2 top guide channels, 2 bottom rails, 4 top guides, 4 No.84N bottom rollers, all screws and installation instructions. Type Opening Width Hardware for Code TR4 1200mm 2 Doors TR5 1500mm 2 Doors TR6 1800mm 2 Doors RECESSED BOTTOM ROLLER [SOLD SEPARATELY AS PAIRS] Type Description Code 82N Bottom Roller (Pair) - Mortice or Face Fitted Bottom Rail Aluminium (2 per set) 81 Top Guide Aluminium (2 per set) 84N Bottom Roller (4 per set) 131N/81 Top Guide (4 per set) Alternate Recessed 82N Bottom Roller (Sold Separately as pairs) 82N Recessed Bottom Roller O : 16 Dimension data and specifications may change without notification.

17 Bottom-Roller Door Hardware Glassroll 25 Application Suitable for interior sliding frameless glass or panels of mirror, plastic, veneered timber, etc. to showcases, bathroom cabinets, bookcases, hatches and reception windows. Single, double or multiple lines of panels can be arranged to suit most situations. Standard Sets Standard sets are available for bi-passing 6mm thick panels. Set comprises 520W top rail, 2 glazing rails with glazing strip, bottom rail, 4 bottom rollers, 4 end caps, 2 finger pulls, all screws and installation instructions. Door Specification Maximum panel weight 25kg Maximum panel area 1.4m sq. Maximum panel thickness 6mm Minimum panel width should not be less than half the panel height Panel height: 31mm less than the opening height. The panel width, on a bi-passing application, is half the opening width plus 16mm, providing a 38mm overlap at the centre of the overlap when No.506 caps are fitted. Type Opening Width Hardware for Code GR4 1200mm 2 Panels GR5 1500mm 2 Panels GR6 1800mm 2 Panels No.504 Bottom Rollers (4 per set) No.506 End Caps (2 per set) No.27 Finger Pull (2 per set) 502W Top Rail 503 Glazing Rails with Glazing Strip (2 per set) No.505 Bottom Rail O : 17

18 Tracks Bottom-Roller Door Hardware Door Specification Maximum weight 15kg each panel (standard roller) Maximum weight 45kg each panel (heavy duty roller) Door thickness maximum 18mm Scorri Slide System Application Slide door system suitable for interior sliding timber or glass doors TRACK ONLY 3000mm [SOLD SEPARATELY] Type Description Code ART402 SCORRI Sliding Door Track ART408 SCORRI Sliding Bottom Roller ART406 SCORRI Sliding Bottom Roller - Heavy Duty Min. 3.5 Max. 6.5 Timber Door Application SCORRI SLIDE COMPONENTS [SOLD SEPARATELY] Type Description Code ART414 Glass Door Upper Stop Lock ART410 SCORRI Lower Door Stopper ART412 SCORRI Top Door Guide ART414 SCORRI Upper Stop Lock ART410 SCORRI Lower Door Stopper ART412 SCORRI Top Door Spring Guide Glass Door Application ART402 SCORRI Sliding Door Track Plastic ART406 SCORRI Sliding Bottom Roller HEAVY DUTY ART408 SCORRI Sliding Bottom Roller O : 18 Dimension data and specifications may change without notification.

19 9 6.5 Bottom and Top-Roller Door Hardware TROLA Roller - Top Track TROLA Slide System suitable for sliding doors 10 Finish Length Code Brown 3.6m TROLA Roller - Bottom Track TROLA Slide System suitable for sliding doors 6.3 Finish Length Code Brown 3.6m Ø TROLA Slide Components - Bottom Guide Roller Finish Code White TROLA Slide Components - Top Guide Bolt Finish Code Brown O : 19

20 Tracks Sliding Showcase System Aluminium Track and Fittings Suits 6mm glass Description Length Finish Code Top Guide 3.6m Clear Anodised Bottom Rail 3.6m Clear Anodised Bottom Track 3.6m Clear Anodised End Cap suit Bottom Rail Black End Cap suit Bottom Rail Grey Glazing Vinyl Roll (40m) Clear Glazing Vinyl Per metre Clear Showcase Pile Per metre Black MT Showcase Pile Roll (915m) Black Adjustable Roller with screw Stainless Steel Finger Pulls - suit 5-6mm glass(21mm hole) Chrome Showcase Lock (Left Hand) Chrome Showcase Lock (Right Hand) Chrome Showcase Sliding Lock (Key Alike) Chrome Showcase Sliding Lock (Key To Differ) Chrome Deductions Glass Height = Opening Height less 36mm Glass Width = Opening Width divided by 2, plus Overlap Top Guide Bottom Rail Bottom Track End Cap Roller Glazing Vinyl Finger Pulls Showcase Pile Showcase Lock (Left hand pictured) Showcase Lock (Right hand pictured) Showcase Sliding Lock O : 20 Dimension data and specifications may change without notification.

21 Interior Sliding Glass / Panel Tracks Glass Sliding Door Track - Top and Bottom Application Tracks [SOLD SEPARATELY] Description Channel Length Finish Code Top Track 4mm 3.6m White PVC Bottom Track 4mm 3.6m White PVC mm Top Track 4mm 3.6m Brown PVC Bottom Track 4mm 3.6m Brown PVC Top Track 5mm 3.6m White PVC Bottom Track 5mm 3.6m White PVC mm Top Track 5mm 3.6m Brown PVC Bottom 5mm 3.6m Brown PVC Top Track 6mm 3.6m White PVC Bottom Track 6mm 3.6m White PVC Top Track 6mm 3.6m Brown PVC Bottom Track 6mm 3.6m Brown PVC mm Cupboard Door Track & Showcase Maximum load 28kg per door Slide door system suitable for interior sliding timber doors Minimum 12mm thick or more Extruded aluminium head guide and bottom track Bottom roller. All metal/zinc plate Description Length Finish Code Head Guide 4m Clear Anodised Bottom Track 4m Clear Anodised Roller Roller O : 21

22 Aluminium doors and drawers Aluma aluminium doors and drawers offer a contemporary look that incorporates anodised aluminium with the crisp look of glass to create the perfect finish to suit your kitchen, bathroom or wardrobe cabinets. Aluma doors and drawers are manufactured to the highest quality, in clear anodised aluminium. Combined with a wide range of glass insert options, the possibilities are endless. Marada 38mm Flat Frame Marada 38mm exterior lip with 45mm back lip Marada 28mm Flat Frame 50mm Boxed Frame with 9mm exterior lip 50mm Boxed Frame with 38mm exterior lip 50mm Boxed Frame with 31mm exterior lip 50mm Boxed Frame with 50mm exterior lip