Standard & Metric Fasteners
|
|
|
- Francine Brown
- 7 years ago
- Views:
Transcription
1 Standard & Metric Fasteners
2 04PK 9417PK 1/4-0 x /16 3/4 O.D. Loose Washer 7/16 Indented Hex Head Dog Point Body Bolts Ford # S Pcs. 9867PK 1/4-0 x 1 5/8 O.D. Loose Washer 7/16 Indented Hex Head Dog Point Body Bolts Chrysler # 6039 Pcs. PK 5/16-18 x 3/4 13/16 O.D. Flange 1/ Hex Dog Point Spin Lock Bolts Pcs. 9868PK 5/16-18 x 13/16 1/3 O.D. Flange 1/ Indented Hex Head Type CA Body Bolts # Pcs. 9890PK 5/16-18 x 1 13/16 O.D. Flange 1/ Hex Dog Point Spin Lock Bolts Pcs. 5/16-18 x 1 7/8 O.D. Loose Washer 1/ Indented Hex Head Body Bolts Pcs. 4
3 949PK 06PK 5/16-18 x 1 7/8 O.D. Loose Washer 1/ Indented Hex Head Type CA Body Bolts Pcs. 0PK 5/16-18 x 1 3/16 7/8 O.D. Loose Washer 1/ Indented Hex Head Dog Point Body Bolts Ford # S Pcs. 1PK 3/8-16 x 1 1 O.D. Loose Washer 9/16 Indented Hex Head Type CA Body Bolts # Pcs. 970PK NEW! 3/8-16 x 1 1/ 1 1/8 O.D. Loose Washer 9/16 Indented Hex Head Type CA Body Bolts # Pcs. 97PK x 0mm O.D. Loose Washer Hex Metric Dog Point Body Bolts Chrysler # 6539 Pcs. 6- x 16mm 18.5mm O.D. Loose Washer Indented Hex Head Zinc and Yellow Finish Metric Body Bolts # Pcs.
4 568PK 9889PK 6- x 0mm O.D. Flange Indented Hex Head Metric Type CA Flange Bolts # Pcs. 5684PK 6- x 0mm O.D.Flange Indented Hex Head Metric Body Bolts # Pcs. 5698PK 6- x 0mm O.D. Loose Washer Indented Hex Head # Pcs. 5686PK 6- x mm 19mm O.D. Loose Washer Indented Hex Head Metric Dog Point Body Bolts Ford # N S Pcs. 5690PK 6- x mm O.D. Loose Washer Indented Hex Head # Pcs. 6- x mm 4mm O.D. Loose Washer Indented Hex Head # Pcs. 6
5 5699PK 5705PK 6- x 19mm O.D. Loose Washer Indented Hex Head Zinc and Yellow Finish Metric Dog Point Body Bolts Ford # N S36 Pcs. 569PK 6- x 19mm O.D. Loose Washer Indented Hex Head Metric Dog Point Body Bolts Ford # N S Pcs. 13PK 6- x 35mm O.D. Loose Washer Indented Hex Head # 1144 Pcs. 9147PK 8-1. x mm 16mm O.D. Flange Indented Hex Head # 1970 Pcs. 5695PK 8-1. x mm 4mm O.D. Loose Washer Indented Hex Head # Pcs x 30mm O.D. Flange Indented Hex Head Zinc Finish Pcs. 7
6 5688PK 5697PK 8-1. x 30mm 4mm O.D. Loose Washer Indented Hex Head # Pcs. 9064PK 8-1. x 30mm O.D. Flange Indented Hex Head # 1971 Pcs. 40PK -1. x 40mm O.D. Loose Washer mm Indented Hex Head # Pcs. 855PK 5/16-18 x 1 3/4 Head Diameter Round Style Head Stainless Steel Capped Bumper Bolts Pcs. 4PK 3/8-16 x 1 7/8 Head Diameter Pan Style Head Stainless Steel Capped Bumper Bolts Chrysler # Pcs. 3/8-16 x 1 1/4 7/8 Head Diameter Round Style Head Stainless Steel Capped Bumper Bolts Pcs. 8
7 33PK 31PK 7/16-14 x 1 1/ 9/3 Head Diameter Round Style Head Stainless Steel Capped Bumper Bolts Pcs. 975PK 1/-13 x 1 1/ 1 3/3 Head Diameter Round Style Head Stainless Steel Capped Bumper Bolts Pcs. 9877PK 8-1. x mm 19mm Head Diameter Pan Style Head Stainless Steel Capped Bumper Bolts # Pcs. 18PK 1/4-0 x 7/8 5/8 O.D. Flange 3/8 Indented Hex Head Truck Mirror Mounting Screws # Pcs. 9541PK 1/4-0 Thread 3/16 Grip Range Non Sealing Type Steel Jack Nuts Pcs. 1/4-0 x 1 5/8 O.D. Loose Washer Chrome Finish Outside Mirror Mounting Bolts Use with # 9371 # Pcs. 9
8 9371PK 9561PK 1/4-0 Thread 3/16 Grip Range Raintite Sealer Type Steel Jack Nuts # 3679 Pcs. 89PK 1/4-0 x 1 Screw Mirror Mounting Screw & Jack Nut Assembly # 3679, Pcs. 1793PK 6- x 6mm Chrome Finish Outside Mirror Mounting Bolts Use with # 1793 Ford # N S Pcs. 35PK NEW! 6-mm Roof Rack Mounting Raintite Sealer Type Steel Jack Nuts # Pcs. 9891PK 8-3 Screw 5/16 Hole 7/16 Stem Length 7/16 Flange Diameter Black Rubber Well Nuts Pcs. -3 Screw 3/8 Hole 33/64 Stem Length 1/ Flange Diameter Black Rubber Well Nuts Pcs. 30
9 9543PK 95PK 1/4-0 x 1 # Head Phillips Oval Head Stainless Steel Roof Rack Machine Screws Use with # 95 Pcs. 954PK 1/4-0 Screw 1/ Hole 9/16 Stem Length 5/8 Flange Diameter Black Rubber Well Nuts # Pcs. 184PK 6- x 6mm # Head Phillips Oval Head Stainless Steel Roof Rack Machine Screws Use with # 184 Pcs. 1PK 6-mm Screw 1.5mm Hole 16mmStem Length 5/8 Flange Diameter Black Rubber Well Nuts # Pcs. Nylon Insert Lock Nuts Hex Pkg Qty -4 Screw 3/8 Hex Machine Screw Nuts Pcs. 9759PK 9819PK 344PK 9984PK 5/16-18 (USS) 5/16-4 (SAE) 3/8-16 (USS) 7/16-14 (USS) 1/ 1/ 9/16 5/8 31
10 4040PK Grade 5 Hex Cap Screws 3/8 Shaft Diameter.303 Grove Dia..039 Groove Width E Type Retaining Rings Pcs. 41PK 1330PK 1331PK 133PK 1333PK 1334PK 1335PK 1/4-0 x 1/ 1/4-0 x 3/4 1/4-0 x 1 1/4-0 x 1 1/4 1/4-0 x 1 1/ 1/4-0 x Pkg Qty 1336PK 1337PK 1338PK 1339PK 1340PK 1341PK 5/16-18 x 3/4 5/16-18 x 1 5/16-18 x 1 1/4 5/16-18 x 1 1/ 5/16-18 x 5/16-18 x 1/ 3/8 Bolt 11/16 Outside Diameter Internal Tooth Bright ZInc Finish Lockwashers Pcs. 134PK 1343PK 1344PK 1345PK 1346PK 1347PK 77PK 1348PK 1349PK 9749PK 1351PK 3/8-16 x 1 3/8-16 x 1 1/4 3/8-16 x 1 1/ 3/8-16 x 3/8-16 x 1/ 3/8-16 x 3 3/8-16 x 3 1/ 7/16-14 x 1 7/16-14 x 1 1/4 7/16-14 x 1 1/ 7/16-14 x Finished Hex Nuts 135PK 1353PK 1354PK 1355PK 1/ -13 x 1 1/ 1/ -13 x 1/ -13 x 1/ 1/ -13 x 3 Wrench Pkg Qty 1313PK 1314PK 13PK 1316PK 1317PK 1/4-0 5/ /8-16 7/ / -13 7/16 1/ 9/16 11/16 3/4 3
11 1319PK 130PK 131PK 13PK 133PK USS Flatwashers Bolt 1/4 5/16 3/8 7/16 1/ I.D. O.D. Pkg Qty 5/16 3/8 7/16 1/ 9/16 3/4 7/ /4 1 3/8 149PK 148PK 147PK 146PK 145PK Fenderwashers Bolt O.D. Thickness 1/4 1/4 1/4 5/16 5/ /4 1 1/ 1 1/4 1 1/ 1/16 3/64 3/64 3/64 3/64 Pkg Qty 9958PK SAE Flatwashers Bolt I.D. O.D. Pkg Qty 1364PK 1365PK 1366PK 1367PK 1368PK 1/4 5/16 3/8 7/16 1/ 9/3 11/3 13/3 /3 17/3 5/8 11/16 13/16 /16 1 1/16 3/8-16 x 4 Grade 8 Hex Head Cap Screws Pcs. 6PK Spring Steel Standard Lockwashers 3/8-16 (USS) Bolt 3/4 O.D. Flange 9/16 Hex ZInc Finish Serrated Flange Nuts Pcs. 13PK 136PK 137PK 138PK 139PK 1/4 5/16 3/8 7/16 1/ Pkg Qty 33
12 9884PK 404PK 9806PK 9741PK 974PK 9743PK 9744PK 180,000 P.S.I. Tensile Strength Grade 9 Bright Yellow Zinc Finish Body & Frame Clamp Replacement Bolts Made in the USA 1/-13 x (USS) 1/-13 x 1/ (USS) 1/-13 x 3 (USS) 5/8-11 x 3 (USS) 5/8-11 x 3 1/ (USS) 5/8-11 x 4 (USS) 5/8-11 x 4 1/ (USS) Pkg Qty Grade 9 Bright Yellow Zinc Finish Body & Frame Clamp Replacement Bolt Kits Made in the USA Contains: Bolts, Nuts, 4 Flat Washers Pkg Qty /-13 x 1/-13 x 3 5/8-11 x 3 5/8-11 x 3 1/ 5/8-11 x 4 5/8-11 x 4 1/ 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit Contains: 16 Bolts, 16 Nuts, 16 Flat Washers Pkg Qty /-13 x 1/ 5/8-11 x 3 1/ 1 Kit 1 Kit Grade 9 Bright Yellow Zinc Finish Body & Frame Clamp Replacement Special Tall Nuts Made in the USA Grade 9 Bright Yellow Zinc Finish Body & Frame Clamp Replacement Thick Flatwashers Made in the USA Pkg Qty Pkg Qty 9807PK 9739PK 1/-13 (USS) 5/8-11 (USS) 9808PK 9740PK 1/ (SAE) 5/8 (SAE)
13 Hammerlock Type Zinc Plated Cotter Pins Insert Length Diameter Pkg Qty Insert as you would any ordinary cotter pin. Hob-Lok pins have specially tapered parallel shanks for quick insertion. 406PK 4063PK 4064PK 4065PK 4067PK 1/16 x 3/4 1/16 x 1 1/16 x 1 1/4 1/16 x 1 1/ 1/16 x Hit with Hammer 4069PK 4070PK 4071PK 407PK 4074PK 3/3 x 3/4 3/3 x 1 3/3 x 1 1/4 3/3 x 1 1/ 3/3 x Shanks Spread and Lock Themselves When hammer hits head of Hob-Lok pin, it forces the shorter shank down over the curved end of the linger shank, thus causing the lower ends of the shanks to spread apart. This simple operation locks the pin securely in place. No twisting or spreading of the shanks is necessary. It is all done automatically! 4084PK 4086PK 4087PK 4088PK 4089PK 4090PK 4091PK 4094PK 4095PK 4096PK 4098PK 4PK 1/8 x 3/4 1/8 x 1 1/8 x 1 1/4 1/8 x 1 1/ 1/8 x 1 3/4 1/8 x 1/8 x 1/ 5/3 x 1 5/3 x 1 1/4 5/3 x 1 1/ 5/3 x 5/3 x 1/ Twist to Remove 43PK 45PK 47PK 48PK 3/16 x 1 3/16 x 1 1/ 3/16 x 3/16 x 1/ 411PK 4114PK 4116PK 1/4 x 1 1/4 x 1 1/ 1/4 x To remove, insert any small tool in eye of Hob-Lok pin. Twist shorter shank to original position and remove. 35
14 Class 8.8 Hex Head Cap Screws Din# (Fully Threaded) Din# (Partially Threaded) Class 8.8 Hex Head Cap Screws Din# (Fully Threaded) Din# (Partially Threaded) Part Thread Pitch Wrench Din Pkg Qty Part Thread Pitch Wrench Din Pkg Qty 869PK 870PK 871PK 87PK 873PK 874PK 875PK 876PK 9765PK 877PK 878PK 879PK 880PK 881PK 9766PK 4 x 16mm 4 x 0mm 5 x 5 x 16mm 5 x 0mm 5 x mm 5 x 30mm 6 x 6 x 16mm 6 x 0mm 6 x mm 6 x 30mm 6 x 35mm 6 x 40mm 6 x mm mm 7mm 893PK 894PK 895PK 896PK 897PK 899PK 900PK 903PK 904PK 905PK 906PK 907PK x 0mm x mm x 30mm x 35mm x 40mm x mm x 60mm 1 x mm 1 x 30mm 1 x 40mm 1 x mm 1 x 60mm mm 19mm 19mm 19mm 19mm 884PK 885PK 886PK 887PK 888PK 889PK 890PK 891PK 89PK 8 x 8 x 16mm 8 x 0mm 8 x mm 8 x 30mm 8 x 40mm 8 x mm 8 x 60mm 8 x 70mm
15 Class 8 Metric Hex Nuts Din# 934 Spring Steel Metric Lockwashers Din# 17 Part Thread Pitch Wrench Pkg Qty Part Bolt I.D. O.D. Pkg Qty 861PK 86PK 863PK 865PK 866PK 867PK 4mm 5mm 6mm mm 19mm 1658PK 1659PK 1661PK 166PK 1663PK 1664PK 4mm 5mm 6mm 4.1mm 5.1mm 6.1mm 8.mm.mm 1.mm 7.4mm 9.0mm 11.5mm 14.mm 17.5mm 0.3mm Metric Flatwashers Din# 1 Part Bolt I.D. O.D. Pkg Qty 1651PK 165PK 1654PK 1655PK 1656PK 1657PK 4mm 5mm 6mm 4.3mm 5.3mm 6.4mm 8.4mm.5mm 9mm 11mm 1mm 4mm 37
16 Class.9 J.I.S. Small Head Hex Flange Bolts Part Thread Pitch Wrench Flange O.D. Pkg Qty 303PK 304PK 305PK 306PK 307PK 308PK 309PK 984PK 3PK 311PK 31PK 313PK 314PK 3PK 316PK 317PK 318PK 319PK 30PK 31PK 3PK 6 x 6 x 16mm 6 x 0mm 6 x mm 6 x 30mm 6 x 35mm 6 x 40mm 6 x 45mm 8 x 8 x 16mm 8 x 0mm 8 x mm 8 x 30mm 8 x 35mm 8 x 40mm x 16mm x 0mm x mm x 30mm x 35mm x 40mm mm 17.5mm 17.5mm 17.5mm 17.5mm 17.5mm 17.5mm 1mm 1mm 1mm 1mm 1mm 1mm Class Metric Spin Lock Nuts Serrated Part Thread Pitch Wrench Flange O.D. Pkg Qty 3PK 301PK 30PK 6mm mm 38
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
Nordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)
Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
Resharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product
Parts Manual 15.5HP Product Coronet RD Series Riding Mowers Mfg. No. Description 7800674 Coronet RD, 15.5HP Hydro (CE) 7800675 Coronet RD, 15.5HP Hydro (CE, FR) 17.5HP Product Mfg. No. Description 7800678
STIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
I BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
Item No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
AM/FM ANTENNA RELOCATION KIT
-J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model
EMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
C-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
TRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
ILLUSTRATED PARTS LIST
CW11 / TW11 / TW11R WITH 340cc HONDA ENGINE 800-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side.
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
ALUMINUM UNIVERSAL VAN / CAP RACK INSTRUCTIONS ROOF MOUNT APPLICATION P/N ULRHDGV-1 / ULRHDGC-1
ALUMINUM UNIVERSAL VAN / CAP RACK INSTRUCTIONS ROOF MOUNT APPLICATION P/N ULRHDGV-1 / ULRHDGC-1 Package Contents: (8) Load Secure Posts (2) Cross Bars (4) Curved Arms (4) G Mount Hinges (4) G Mount Rubber
DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
DB 18 & DB 18E Options
DB 8 & DB 8E Options Assembly Manual Boom Truss Element Truss 6m Passive Inventory check DB 8 & DB 8 E Boom Truss Kit 7-004-0 QTY Part # Description 6 60-0045 /6 wire clips 4 60-0048 /6 Thimble 4 60-0044
92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540
92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540 www.airliftperformance.com MN-514 (06409) NPR 4762 Please read these instructions completely before proceeding with installation
MUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
Assembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
SWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
SWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL BASKETBALL GAMES ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 Canby,
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
CUSTOM AUXILIARY FORWARD LIGHTING KIT
-J0 REV. 0--0 CUSTOM AUXILIARY FORWARD LIGHTING KIT GENERAL Kit Number -0, 0000 Models This Custom Auxiliary Lighting Kit adds lamps and turn signals to 00 and later FLHX model motorcycles. Additional
Service Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Metric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions
MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions MONITOR PRODUCTS, INC. 15400 Flight Path Dr Brooksville, FL 34604 Tel: 1-800-334-4591 or 352-544-2620 Sales: ext 201 Technical Support:
Please Do Not Return This Product to the Store!
MODEL NO. B400W GS60 BASKETBALL SYSTEM O W N E R ' S M A N U A L 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be
INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
AM/FM ANTENNA KIT (TOUR-PAK MOUNT)
-J077 REV. 008-0-0 AM/FM ANTENNA KIT (TOUR-PAK MOUNT) GENERAL Kit Number 7-98A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
R O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 12 10 3 11 4 5 13 7 8 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1... 4...1/2 x 1 1/2
Small Flat Panel Lift Arm FSA-1004 and KSA-1004
I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows
*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
Installation instruction do88 Intercooler for Volvo S40 / V50 / C30
Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools................................................3 Installation of complete kit...................................................5
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Structural Holding System
Structural Holding System Users Manual November 2013 by Vehicle Service Group. All rights reserved. CO8812.1 502071 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies
Working Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
SECTION VII PARTS BREAKDOWN
SECTION VII PARTS BREAKDOWN 21 REAR TINE TILLER MAIN ASSEMBLY ITEM # PART # QTY DESCRIPTION 1 SEE PAGE 25 1 ENGINE-RIGHT ANGLE DRIVE-PULLEY ASSEMBLY 2 SEE PAGE 27 1 FRAME-TRANSMISSION-HOUSING ASSEMBLY
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
assembly instructions
assembly instructions 1 // this guide is for Urban Chic gents & ladies. // this guide is for Urban Chic gents & ladies. 2 1 x ph screwdriver 2 x 10mm spanners 1 x 15mm spanners 1 x 13mm spanners 1 x 6mm
R O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM
Auto-belay Cable Replacement Process
Auto-belay Cable Replacement Process Version 2.00 WARNING: The air pressure in the auto-belay system is what causes the cable to be retracted when releasing the cable or climbing the wall with the cable
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
CFF-1 Follow Focus One C1241-0001
CFF-1 Follow Focus One C1241-0001 Original Instructions: English Publication No. C1241-0001-800/1 Copyright 2011 All rights reserved throughout the world. No part of this document may be stored in a retrieval
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.
MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.
INSTRUCTIONS. FLHR/C/S (Road King) FRONT END LOWERING KIT 1WARNING -J03242 REV. 10-19-04. General. Removal (Left and Right Forks) Kit Number 54614-05
INSTRUCTIONS -J04 REV. 0-9-04 General FLHR/C/S (Road King) FRONT END LOWERING KIT This kit is designed for installation on 00 and later FLHR/C/S Model Motorcycles. Road King models use the conventional
LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963
LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 Thank you for purchasing LG Motorsports products for your Gen 5 Camaro. Parts Inventory:
Black Wolf POCKET BILLIARD TABLE INSTALLATION MANUAL. SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104
Black Wolf TM POCKET BILLIARD TABLE INSTALLATION MANUAL www.brunswickbilliards.com SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104 51-905710-000 SEPTEMBER 2010 NOTE: Please use the instructions in this
Pulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE
Pulleys and Belt Pulley Guard - 505862 Install the Major Accessory and Pulley 1. Place the short end of the mounting base holes, and insert - but don t tighten - the setscrews. If the Major Accessory has
INSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
Fixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A.
GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. FORM NO. 79023737A JULY, 2005 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the
Verify caster, camber and toe-in are correct before proceeding.
If rotating the tie rod end 360 degrees changes the toe-in too much, use the rack tie rod to make smaller adjustments. Put the tie rod end in the steering arm and snug the castle nut before adjusting.
R O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. MOUNTING BRACKET KIT 14 8 7 4 13 5 6 ITEM QTY NAME MATERIAL 1...6...1/2" x 2 1/2" BOLT... 350099-00 2...2...1/2" x 1 1/2" BOLT... 350095-00 3...8...1/2" LOCK WASHER... 350309-00
IMPORTANT SAFETY UPDATE
J. H. FLETCHER & CO. Box 2187 Huntington, WV 25722-2187 304/525-7811 FAX 304/525-4025 IMPORTANT SAFETY UPDATE INFORMATION BULLETIN NO. 87 TO: FROM: OWNERS OF ROOF DRILLS THAT ARE NOW USING THE DUST BAG
Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.
Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or
Furniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
MARK-3 DIS Digital Ignition Solution
Overview: MARK-3 DIS Digital Ignition Solution WATERAX offers a conversion kit Digital Ignition Solution (DIS) for users that want to convert a MARK-3 from breaker points and mechanical cut-out switch
Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
SPARE PARTS LIST AND ASSEMBLING GUIDELINE FOR EM 50 FAN
SPRE PRTS LIST ND SSEMLING GUIDELINE FOR EM 50 FN Munters euroemme S.p.. Strada Piani, I-807 Chiusavecchia (Imperia) - Italy Tel. +39 083 5 Fax +39 083 5333 http://www.munters.com e-mail:info@munterseuroemme.it
OWNERS MANUAL. Model No. 45-0292 15 GALLON "PRO" TOW SPRAYER
OWNERS MANUAL Model No. 45-0292 CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts 15 GALLON "PRO" TOW SPRAYER PRINTED IN USA FORM NO. 47628 (REV.
Cylinder head, removing and replacing
15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail