METRIC CLASS 8.8 HEX BOLTS / BOLT & NUTS
|
|
- Flora Nicholson
- 7 years ago
- Views:
Transcription
1
2 CONTENTS PRODUCT PREFIX PAGE METRIC CLASS 8.8 HEX BOLTS / BOLT & NUTS Class 8.8 Hex Bolts - Plain 880/ Class 8.8 Hex Bolts - Z/P Clear (Trivalent) 815/ Class 8.8 Hex Bolts & Nuts - Plain Class 8.8 Hex Bolts & Nuts - Z/P Clear (Trivalent) METRIC ALLOY CLASS 10.9 HEX BOLTS Class 10.9 Hex Bolts - Z/P Clear (Trivalent) Class 10.9 Hex Bolts - Plain (M30 & M36) Class 10.9 Hex Bolts - Plain (Fine Pitch) IMPERIAL ALLOY GRADE 8 HEX BOLTS Grade 8 Hex Bolts - Plain 452/ Grade 8 Hex Bolts - Z/P Yellow (Dichromate) 450/ Grade 8 Hex Bolts - Z/P Clear (Trivalent) NUTS METRIC Class 8 Hex Nuts - Plain Class 8 Hex Nuts - Z/P Clear (Trivalent) Class 10 Hex Nuts - Z/P Clear (Trivalent) Class 10 Hex Nuts - Plain (M30 & M36) Class 10 Hex Nuts - Plain (Fine Pitch) IMPERIAL Grade 8 Hex Nuts - Plain 326/ Grade 8 Hex Nuts - Z/P Yellow (Dichromate) Grade 8 Hex Nuts - Z/P Clear (Trivalent) IMPERIAL Grade C Conelock Nuts - Z/P & Waxed METRIC Class 10 Conelock Nuts - Z/P & Waxed METRIC Class 6 Nylon Insert Locknuts - Z/P Class 8 Nylon Insert Locknuts - Z/P Class 10 Nylon Insert Locknuts - Z/P IMPERIAL Grade 2 Nylon Insert Locknuts - Z/P Grade C Nylon Insert Locknuts - Phos & Oil Grade C Nylon Insert Locknuts - Z/P WASHERES METRIC Hardened Flat Washers - Z/P 371/ Hardened Flat Washers - Plain 372/ Hardened Spring Washers - Z/P IMPERIAL SAE Hardened Flat Washers - Plain 375/ SAE Hardened Flat Washers - Z/P Yellow (Dich.) 381/ SAE Hardened Flat Washers - Z/P Clear (Trivalent) USS (OVERSIZE) Hardened Flat Washers - Z/P Yellow (Dich.) 351/ USS (OVERSIZE) Hardened Flat Washers - Plain 352/ SAE Hardened Spring Washers - Plain 358/ SAE Hardened Spring Washers - Z/P Yellow (Dich.) 341/ SAE Hardened Spring Washers - Z/P Clear (Trivalent) L9 FASTENING SYSTEM Alloy L9 Hex Bolts - Z/P Yellow Dichromate L9 Hex Nuts - Cad. & Wax Yellow Dichromate L9 Stover Locknuts - Cad. & Wax Yellow Dichromate L9 Tension Flat Washers - Cad. & Wax Yellow Dichromate AS 1252 STRUCTURALS Metric Class 8.8 Structural Assemblies Hot Dip - Galvanised Class 8 Structural Nuts H.D.G / Plain Structural Washers H.D.G / Plain REFERENCES * All prices purchase in this catalogue is per 100 * All prices are exclusive of GST * Items with length coloured in RED are supplied in full thread
3 CLASS 8.8 METRIC-PLAIN AS/NZS ISO 4014/4017 CLASS 8.8 METRIC-PLAIN AS/NZS ISO 4014/4017 M $ mm Pitch $ $ $ $ $ $ $ $22.50 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $46.60 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $67.70 M mm Pitch... Continues $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS www. brightonbest. com AU
4 CLASS 8.8 METRIC-PLAIN AS/NZS ISO 4014/4017 CLASS 8.8 METRIC-PLAIN AS/NZS ISO 4014/4017 METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ M mm Pitch... Continues $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, $1, $2, $2, $2, $2, $2, M / $ mm Pitch / $ / $ / $ / $ / $1, / $1, / $1, / $1, / $1, / $1, www. brightonbest. com AU
5 CLASS 8.8 METRIC-PLAIN AS/NZS ISO 4014/4017 CLASS 8.8 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 M mm Pitch... Continues M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $1, / $1, / $1, / $2, / $2, / $2, / $2, / $2, / $2, / $2, / $3, / $3, / $3, / $3, / $4, / $4, / $5, / $5, M / $2, mm Pitch / $2, / $2, / $2, / $2, / $2, / $3, / $3, / $3, / $3, / $3, / $3, / $4, / $4, / $4, / $4, / $4, / $4, / $5, / $5, / $5, / $5, M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS CLASS 8.8 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 M / $ mm Pitch / $ / $ / $ / $ / $ / $19.50 M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ www. brightonbest. com AU
6 CLASS 8.8 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 CLASS 8.8 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS M mm Pitch... Continues / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ M mm Pitch... Continues / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $ / $1, / $1, / $1, / $1, M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ M / $ mm Pitch / $ / $ / $ / $ / $ / $ / $ / $ www. brightonbest. com AU
7 CLASS 8.8 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 CLASS 8.8 & NUTS METRIC - PLAIN AS/NZS ISO 4014/4017 & AS/NZS ISO 403 M mm Pitch... Continues / $ / $ / $ / $ / $1, / $1, / $1, / $1, / $1, / $1, / $1, / $1, / $1, / $2, / $2, / $2, CLASS 8.8 & NUTS METRIC - PLAIN AS/NZS ISO 4014/4017 & AS/NZS ISO 403 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $47.60 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M8 1.25mm Pitch... Continues $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $96.00 METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS www. brightonbest. com AU
8 CLASS 8.8 & NUTS METRIC - PLAIN AS/NZS ISO 4014/4017 & AS/NZS ISO 403 CLASS 8.8 & NUTS METRIC - PLAIN AS/NZS ISO 4014/4017 & AS/NZS ISO 403 METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS M mm Pitch... Continues $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ M mm Pitch... Continues $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, $1, $2, www. brightonbest. com AU
9 CLASS 8.8 & NUTS METRIC - PLAIN AS/NZS ISO 4014/4017 & AS/NZS ISO 403 CLASS 8.8 & NUTS METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 & AS/NZS ISO 4032 M mm Pitch... Continues $2, $2, $2, $2, CLASS 8.8 & NUTS METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 & AS/NZS ISO 4032 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $56.90 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $28.80 M mm Pitch... Continues $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS www. brightonbest. com AU
10 CLASS 8.8 & NUTS METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 & AS/NZS ISO 4032 CLASS 8.8 & NUTS METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 & AS/NZS ISO 4032 METRIC CLASS 8.8 HEX BOLTS BOLTS & NUTS M mm Pitch... Continues $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M mm Pitch... Continues $ $ $ $1, $1, $1, $1, M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, $1, $1, $2, $2, $2, $2, www. brightonbest. com AU
11 ALLOY CLASS 10.9 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 ALLOY CLASS 10.9 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $88.60 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $92.00 M mm Pitch... Continues $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, M $ mm pitch $ $ $ $ METRIC ALLOY CLASS 10.9 HEX BOLTS www. brightonbest. com AU
12 ALLOY CLASS 10.9 METRIC - Z/P CLEAR (TRIVALENT) AS/NZS ISO 4014/4017 ALLOY CLASS 10.9 METRIC - PLAIN AS/NZS ISO 4014/4017 METRIC ALLOY CLASS 10.9 HEX BOLTS M mm Pitch... Continues $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, $2, M $ mm Pitch $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, $1, $2, $2, $2, $2, M $1, mm Pitch $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $2, $2, $2, $2, $2, $2, $2, $2, $3, $3, $3, $3, $3, $4, $5, $5, $6, M $2, mm Pitch $2, $2, $2, $2, $3, $3, $3, $3, $3, $4, $4, $4, $4, $4, $4, $5, $5, $5, $5, $6, $6, www. brightonbest. com AU
13 ALLOY CLASS 10.9 METRIC - PLAIN (FINE PITCH) AS/NZS ISO 4014/4017 ALLOY CLASS 10.9 METRIC - PLAIN (FINE PITCH) AS/NZS ISO 4014/4017 M $ mm Pitch $ $ $ $ $ $51.30 M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ M mm Pitch... Continues $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ M $ mm Pitch $ $1, $1, $1, METRIC ALLOY CLASS 10.9 HEX BOLTS M $ mm Pitch $ $ $ $ $ $ $ $ $ $ M $ mm Pitch $ $ $ $ $ $ $ $ $ $ $ www. brightonbest. com AU
14 ALLOY GRADE 8 IMPERIAL - PLAIN ANSI B , SAE J429 ALLOY GRADE 8 IMPERIAL - PLAIN ANSI B , SAE J429 IMPERIAL ALLOY GRADE 8 HEX BOLTS 1/4 UNC 1/ / $ TPI 5/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ $ $ /4 UNF 1/ / $ TPI 5/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ $ $ /16 UNC 1/ / $ TPI 5/ / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ /16 UNC 18TPI... Continues 3 1/ / $ / / $ / $ / / $ / $ / / $ / $ $ $ /16 UNF 1/ / $ TPI 3/ / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ $ $ /8 UNC 1/ / $ TPI 3/ / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / $ $ / $ $ $ $ www. brightonbest. com AU
15 ALLOY GRADE 8 IMPERIAL - PLAIN ANSI B , SAE J429 ALLOY GRADE 8 IMPERIAL - PLAIN ANSI B , SAE J429 3/8 UNF 3/ / $ TPI / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / $ $ / $ $ $ $ /16 UNC 3/ / $ TPI / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / / $ / $ $ $ /16 UNF 3/ / $ TPI / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / / $ / $ $ $ /2 UNC 3/ / $ TPI / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / $ $ / $ $ / $ $ / $ $ $ $ $ $ $ /2 UNF 3/ / $ TPI / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / $ $ / $ $ / $ $ / $ $ $ $ $ $ IMPERIAL ALLOY GRADE 8 HEX BOLTS www. brightonbest. com AU
16 ALLOY GRADE 8 IMPERIAL - PLAIN ANSI B , SAE J429 ALLOY GRADE 8 IMPERIAL - PLAIN ANSI B , SAE J429 IMPERIAL ALLOY GRADE 8 HEX BOLTS 1/2 UNF 20TPI... Continues 5/8 UNC 11TPI... Continues $ /16 UNC / $ TPI 1 1/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / / $ / $ /16 UNF / $ TPI 1 1/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / / $ / $ /8 UNC / $ TPI 1 1/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / $ $ / $ $ / $ $ / $ $ $ $ $1, $1, $1, $1, /8 UNF / $ TPI 1 1/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / $ $ / $ $ / $ $ / $ $ $1, $1, $1, $1, $1, $1, /4 UNC / $ TPI 1 1/ / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / / $ / / $ / $ / / $ / $ / / $ / $ / $ $ / $ $ / $ www. brightonbest. com AU
EMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationFRAME ASSEMBLY Item Description Part No Item Descriptiom Part No
FRAME ASSEMBLY Item Description Part No Item Descriptiom Part No 1 BOLT HT ZP M8X20 SET SCREW FBOPL02 26 FRAME M500 PTD RED L1505-710R 2 WASHER SPRING ZP M8 FWAPL58 26 FRAME M500 W/A PTD MASPORT L1505-710M
More informationManufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
More informationHilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationAcero Inoxidable 304 Perno Cabeza Hexagonal Rosca Entera Stainless Steel 304 Hex Cap Screw Full Thread
Perno Cabeza Hexagonal Rosca Entera Hex Cap Screw Full Thread Dimensiones: ANSI B 18.2.1 Rosca: UNC ANSI B 1.1 y BSW BS 84 Dimensions: ANSI B 18.2.1 Thread: UNC ANSI B 1.1 and BSW BS 84 Prices in US$ -
More informationVersion. BBI products and services offered exclusively through distribution
2013 Version BBI products and services offered exclusively through distribution Terms and Conditions of Sale GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationScrew Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More information1999-2010 GENERAL MOTORS 3/4 &1 TON RT3 UNDERCARRIAGE MOUNTING INSTRUCTIONS (PART NO. LTA04767B)
1999-010 GENERAL MOTORS 3/4 &1 TON MOUNTING INSTRUCTIONS (PART NO. LTA04767B) MSC04380-8 WARNING Many newer trucks are now equipped with air bags. DO NOT under any circumstances disable, remove or relocate
More informationHow to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationTC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
More informationConnection Solutions
Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction
More informationThe Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationDR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
More informationPRIMAAX EX / PRIMAAX Rear Air Suspension for Mack Vehicles
PRIMAAX EX / PRIMAAX Rear Air Suspension for Mack Vehicles LIT NO: SP-231 DATE: June 2014 REVISION: D PRIMAAX EX for Mack Vehicles with Drum Brakes 8.5" / 10.0" Ride Height Drum Brakes 31 29 30 18 32 27
More informationAgilent N9911X Economical Waveguide Calibration Components
Agilent N9911X Economical Waveguide Calibration Components Configuration Guide Agilent Technologies Notices Agilent Technologies, Inc. 2013 No part of this manual may be reproduced in any form or by any
More informationINSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
More informationDYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationINSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
More informationKeysight N9911X Economical Waveguide Calibration Components
Keysight N9911X Economical Waveguide Calibration Components Configuration Guide Notices Keysight Technologies 2013, 2014 No part of this manual may be reproduced in any form or by any means (including
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationAlternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
More information1/29/2008 DB30S. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 14
DB30S Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 14 ENGINE Part UPC Number Description Baja Description 31 DB30S-100 883099115806 CLUTCH 1 1 32 DB30S-101 883099115813 ENGINE 1
More informationPRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
More informationBest/Flex Roller Expandable Conveyor
Best Diversified Products Ltd. Best/Flex Roller Expandable Conveyor Product Manual Best Diversified Products Ltd. Brunel Road, Earlstrees Industrial Estate Corby, Northants. NN17 4JW Tel: +44(0) 1536 206969
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 12 10 3 11 4 5 13 7 8 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1... 4...1/2 x 1 1/2
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationAuto mo tive Cor po ra tion TC 237 TRANSFER CASE PARTS MAN UAL
Auto mo tive Cor po ra tion TC 237 TRANSFER CASE PARTS MAN UAL Fabco Automotive Corporation, Livermore, CA Ph: (925) 454-9500 Fax: (925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com See Note 5 See
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationInstallation Instructions HighRock 4x4 TM
Installation Instructions HighRock 4x4 TM Slider Step Vehicle Application: Jeep YJ and TJ Wrangler 1986 2006 Part Number: 49312 www.bestop.com - We re here to help! Visit our web site and click on Ask
More informationPSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationThe Ensat self-tapping threaded insert...
The Ensat selftapping threaded insert... Ensat is a selftapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationVW Caddy W21-760-3503 INSTALLATION INSTRUCTIONS
Unit 626 Kilshane Avenue, North West Business Park, Ballycoolin, Dublin 15, Ireland Telephone: +353 1 8612 632, Fax: +353 1 8612 647, email: sales@driveriteltd.com www.driveriteltd.com VW Caddy W21-760-3503
More informationSmall Flat Panel Lift Arm FSA-1004 and KSA-1004
I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows
More informationSTIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
More informationLet s look at an example of where grade 5 and grade 8 bolts are subjected to single shear loads (winch plate reference).
Bolt s I have been on a quite a few online email lists over the last 7 years or so, basically since they first came out. From the original Jeep-L list to the XJ-list to the Rockcrawler.com board, a common
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationMODEL 201 225LP 225LP2 225LP4 Safety Relief Valves
Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationA Short Guide To Metric Nuts and Bolts
A Short Guide To Metric Nuts and Bolts Answers to the most Frequently Asked Questions Standard and Fine Pitch Threads How to identify nut and bolt strength grades How nut and bolt strength grades compare
More informationINSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
More informationILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
More informationINSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationSOUTH HOLLAND METAL FINISHING SPECIFICATIONS AND PROCESSES - January 2011
SOUTH HOLLAND METAL FINISHING SPECIFICATIONS AND PROCESSES - January 2011 South Holland Metal Finishing is ISO 9001:2008 accredited by NQA, and is accredited to ISO 17025 by the American Association for
More informationKEEP FOR FUTURE REFERENCE MRTALP VERTICAL LIFT BAR READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE INSTRUCTIONS P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 International Version MODEL NUMBER: LB10VLB MRTALP VERTICAL
More information*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
More informationAmerican National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. 6 28 1 2 "ā 1 2 " 4 8 ITEM QTY NAME PART # 1...4...1/2 x 1 1/4 BOLTS... 350094-00 2...4...1/2 LOCK WASHER... 350309-00 3...4...1/2 HEX NUT... 350258-00 4...2...SPACER PLATE...
More informationLOCKWASHERS HELICAL SPLIT & TOOTH TYPE LOCKING TERMINALS SHAFT RETAINERS
LOKWASHERS HELIAL SPLIT & TOOTH TYPE LOKING TERMINALS SHAFT RETAINERS WL - One Of The Few True Fastening Specialists WL has one of the broadest, most diversified offerings of fastening components available
More informationSubmittal Sheet. Product: Item# Description Unit Pack
Submittal Sheet Submittal Sheet #03090414-H Hex Head Drivall Screws (246) Product: Item# Description Unit Pack 08050H3 8 x 1/2-in, Hex Head, Drivall, Clear Zinc, Bulk 10,000 12150H3RG 12 x 1-1/2-in, Hex
More informationOWNERS MANUAL. Model No. 45-0292 15 GALLON "PRO" TOW SPRAYER
OWNERS MANUAL Model No. 45-0292 CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts 15 GALLON "PRO" TOW SPRAYER PRINTED IN USA FORM NO. 47628 (REV.
More informationREEL LAWN MOWERS MASPORT 400-500-660
Issue A June 2009 REF # 719046 REEL LAWN MOWERS MASPORT 400-500-660 Part number Model Engine MASPORT 019036 400 RRR B & S Series 475 MASPORT 019044 400 RRR Honda GX160 MASPORT 019046 500 RRR B & S Series
More information46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
More informationPOLE MOUNT SYSTEM EX-3 INSTALLATION
May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The
More informationBolting Galvanized Steel
Bolting Galvanized Steel This chapter gives information on the characteristics, advantages and economics of bolted galvanized structures and zinc coated fasteners, and offers comment on bolting procedures
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationIs your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
More informationRAIN COLLECTOR S HELF MANUAL
RAIN COLLECTOR S HELF MANUAL The Rain Collector Shelf provides a good mounting support for your Rain Collector II. The Rain Collector Shelf is designed to be attached to Davis Sensor Mounting Arm, and
More informationCAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
More informationTo Use any command in this guide: 1. Select the option from the Design Menu in the Mechanical Eng workspace.
120 1 ME Mechanical Engineers use a variety of mechanical drawings and computer tools for analysis and design. During the design process, drawings are used throughout to develop and document the design
More informationUSED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
More information383-440 MOPAR B/RB COMPRESSOR/ALTERNATOR BRACKET 161002. Bracket Systems TM
383-440 MOPAR B/RB COMPRESSOR/ALTERNATOR BRACKET 6002 8865 GOLL ST. - SAN ANTONIO, TX. - 78266 ph.20-654-77 - fax 20-654-33 90200 REV A 7/27/09 COMP/ALT INST PG OF Table of Contents PAGES. 2. 3. 4. 5.
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationEnsat. Self-tapping inserts SOLID BODIES LINE
Ensat Self-tapping inserts SOLID BODIES LINE Index DESCRIPTION Page Presentation 3 Materials and Applications 4 Features 5 Preparing the receiving hole 6 Tools Codes 7 Ensat Series 302 Ensat Series 303
More informationMounting Tripod Kit Installation Manual
Mounting Tripod Kit Installation Manual For use with Davis s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installation. The tripod supports the Integrated Sensor Suite
More informationXM-4434. Owner s Manual POWER TOWER !CAUTION. Read all precautions and instructions in this manual before using this equipment.
XM-4434 POWER TOWER Owner s Manual!CAUTION Read all precautions and instructions in this manual before using this equipment. Table of Contents Important Safety Information 3 Assembly 4-7 Parts List 8 Exploded
More informationARB AIR LOCKER Air Operated Locking Differentials
CKMTA12 & CKMTA24 On-Board Air Compressor Kit, Maximum Performance Specs: ITEM # QTY DESCRIPTION PART # NOTES 01(a) 2 COMPRESSOR ASSEMBLY (12V) CKM01 1 Voltage 12 Volts (CKMTA12), 24 Volts (CKMTA24) 01(b)
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM
More informationRollator Cane and Brake Replacement SAFETY SUMMARY (CONTINUED)
Rollator Cane and Replacement Assembly, Installation and Operating Instructions SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact Carrier/Dealer
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 16 6 18 Cable Tab 13 15 8 10 2 Cable Tab 1 11 9 17 14 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME
More informationDuctile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationAssembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
More informationAM/FM ANTENNA RELOCATION KIT
-J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model
More informationPRS X-axis E-chain installation: For tools with a 12 Z-Axis
PRS X-axis Energy Chain (Echain) Installation Page -1- PRS X-axis E-chain installation: For tools with a 12 Z-Axis This kit is compatible with PRS Shopbots that have an X-axis cutting area of 96 to 144.
More informationFirst In Fasteners H. Paulin & Co., a division of The Hillman Group Canada ULC
First In Fasteners Since 1920, Papco has been manufacturing and merchandising quality automotive fasteners for original equipment and the aftermarket. Today there are over 12,000 items in the Papco line
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 4 MOUNTING BRACKET KIT 1 2 3 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME PART # 1...2... #10 x
More informationOn lathes, screwcutting is
Universal Cutting on a Mini Lathe Neil Wyatt looks at screwcutting on a modern lathe. Sooner or later, all model engineers need to cut threads on their lathe. Either the thread is simply too large for
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationA lot of people use the terms Bill of Materials and Parts List interchangeably. However, in Inventor 10 they are two different but related things.
BOM 101 Bill of Materials and Parts Lists A lot of people use the terms Bill of Materials and Parts List interchangeably. However, in Inventor 10 they are two different but related things. Bill of Materials
More informationCantina Wood Arc Hammock with Striped Polyspun Bed Set
Cantina Wood Arc Hammock with Striped Polyspun Bed Set Model #: OP-WH01-RH02-CAN-K Assembly Instructions Please do not return this product to the store. Most likely, they do not stock parts and cannot
More information9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More information