TS 8 FREESTANDING ENCLOSURES

Transcription

1 aus TS 8 FREESTANDING ENCLOSURES Height: 0 /1800 mm, depth: 20 /500 mm TS 8 Freestanding Walls PU Part No. Page Sidewalls 2 TS Divider walls 1 TS Divider walls for component s 1 TS Accessories: see pages 876/877 or keyword index. Add-on enclosures: Corner enclosures, see page 917. Alternative option: Special air conditioning door instead of door or rear wall, see pages Cable chamber an alternate base/plinth design and assembly. Details on page 888. Rittal Handbook /Industrial Enclosure Systems 180 hinge may be easily retrofitted. Details on page 948. Divider wall and component s for plug-in cable entry. Details on pages 907/

2 aus All enclosures with identical height and depth dimensions may be bayed together. TS 8 enclosures, single door TS 8 enclosures, double door TS 8 electronic enclosures Height x Depth (inches/mm) Width inches/mm Part No. Width inches/mm Part No. Width inches/mm Part No. 55 x 20/1400 x x 24/1600 x x 32/1600 x x 16/1800 x / / x 20/1800 x / x 24/1800 x / x 16/2000 x x 20/2000 x x 24/2000 x x 32/2000 x x 24/2200 x Note: TS 8 EMC shielded enclosures, see pages 4/ Pages Pages Pages 124/1 Rittal Handbook /Industrial Enclosure Systems

3 397/597/ / /512/2 2/ / /499/699/ /455/655 5/455 Configuration Material Finish Sheet steel Enclosure frame 16 ga/1.5 mm E-coated RAL 7044 Door(s) 14 ga/2.0 mm E-coated Roof 16 ga/1.5 mm RAL 7044, exterior powder painted Rear wall 16 ga/1.5 mm RAL 7032 textured 11 ga/3.0 mm galvanized Cable entry s, 3-part 16 ga/1.5 mm galvanized Protection ratings NEMA 12/IP 55 to EN /10.91 (except for TS ) Detail drawings: see pages Use suffix.800 or.810 for E-coat finish RAL 7044 only; Suffix.500 or.510 for textured paint in RAL Lead times upon request. 110 Height (inches/mm) PU /1800 /1800 /1800 /1800 /1800 Page Width (inches/mm) 16/ / / / 800 Depth (inches/mm) 20/ / / / / 500 Part No. TS ) Door(s) Weight (lbs/kg) 108.5/ / / / /173.3 Base/plinth Components (inches/mm) front and rear, TS H = 4/100 1 set H = 8/200 1 set Side trim s, TS H = 4/100 1 set (inches/mm) H = 8/200 1 set Cable chamber, TS H = 8/ Side s for cable chambers, TS Accessories Cable collecting rails Cable entry s 1), TS ) 892 System support rails bars for doors Print pockets, sheet steel Locking systems Standard lock has double-bit insert which can be exchanged for other inserts and comfort handle, see pages ) Cable entry grommets, see page ) PU = 4 pieces, at a width of 47 /1200 mm the cable entry plates are already 2 piece, split across the width. 3) Without door frame, mounting or cable entry plates. Rittal Handbook /Industrial Enclosure Systems

4 397/597/ / /512/2 2/ / /499/699/ /455/655 5/455 Configuration Material Finish Sheet steel Enclosure frame 16 ga/1.5 mm E-coated RAL 7044 Door(s) 14 ga/2.0 mm E-coated Roof 16 ga/1.5 mm RAL 7044, exterior powder painted Rear wall 16 ga/1.5 mm RAL 7032 textured 11 ga/3.0 mm galvanized Cable entry s, 3-part 16 ga/1.5 mm galvanized 2 mounting rails (PS , see page 975) installed in enclosure depth Protection ratings NEMA 12/IP 55 to EN /10.91 Detail drawings: see pages NEW! a) Also available in a NEMA 4 version Part No b) Also available in a NEMA 4 version Part No Note: NEMA 4 versions include sidewalls. Use suffix.800 or 810 for E-coat finish RAL 7044 only; Suffix.500 or.510 for textured paint in RAL Lead times upon request. 112 Height (inches/mm) PU /1800 /1800 /1800 /1800 /1800 Page Width (inches/mm) 16/ / / / 800 Depth (inches/mm) 24/ / / / / 600 Part No. TS ) a) b) Door(s) Weight (lbs/kg) 113.9/ / / / /179.9 Base/plinth Components (inches/mm) front and rear, TS H = 4/100 1 set H = 8/200 1 set Side trim s, TS H = 4/100 1 set (inches/mm) H = 8/200 1 set Cable chamber, TS H = 8/ Side s for cable chamber, TS Accessories Cable collecting rails Cable entry s 1), TS ) 892 System support rails bars for door Print pocket, sheet steel Locking systems Standard lock has double-bit insert which can be exchanged for other inserts and comfort handle, see pages ) Cable entry grommets, see page ) PU = 4 pieces, at a width of 47 /1200 mm the cable entry plates are already 2 piece, split across the width. 3) Without door stiffeners, mounting and cable entry plates. Rittal Handbook /Industrial Enclosure Systems

5 aus 60 B1 B B1 B T7 35 i.l. T B6 B6 B6 T6 2 i.l. B5 17 H6 i.l. H7 H8 i.l. B5 H4 H6 i.l. H7 H8 i.l. B5 H4 H1 H2 i.l. H3 G H5 H9 4 x (= 100) H9 4 x (= 100) Ø 9 Ø 4.6 Ø 9 Ø M M i.l. T5 T4 T T1 65 T B F 49 Ø 16 i.l. B8 i.l. B3 B2 M12 18 i.l. T T1 65 T Ø 16 B4 not for TS / TS F i.l. B8 i.l. B8 i.l. B3 B M12 i.l. T Base/plinth mount: B4 x T2 Base/plinth mount: B4 x T2 i.l. = available space Double door enclosures. See details above. Height dimensions in mm Width dimensions in mm Depth dimensions in mm Part No. H1 H2 H3 H4 H5 H6 H7 H8 H9 B1 B2 B3 B4 B5 B6 B7 B8 T1 T2 T3 T4 T5 T6 T7 F G Rittal Handbook /Industrial Enclosure Systems

6 F 24.5 TS 8 FREESTANDING ENCLOSURES F Single door/double door Enclosure H1 = Total height H2 = Height of the rear wall H3 = Clearance between vertical frame members H4 = Height of door H5 = Span of system holes H6 = Center-to-center distance of system holes in door stiffeners H7 = Clearance between door stiffeners H8 = Distance between door stiffener screws H9 = Distance from floor to lock center TS 8 Freestanding G Profile cross section Vertical i.l. (T3) i.l. (B3) Horizontal i.l. (B3/T3) i.l. (H3) Note: The total width (B1) will increase by.35 /9 mm when sidewalls are installed..12 /3 mm need to be considered for gasketing when baying enclosures together. B1 = Total width B2 = Width of door B3 = Clearance between vertical frame members B4 = Span of system holes/distance between cable base mounting holes B5 = Clearance between door stiffeners B6 = Center-to-center distance of system holes in door stiffeners B7 = Distance between eyebolts B8 = Base frame opening T1 = Total depth T2 = Span of system holes/distance between cable base mounting holes T3 = Clearance between vertical frame members T4 = Depth of base frame T5 = Base frame opening T6 = Possible installation depth (mounting installation) adjustable along the 1 / mm depth system hole pattern T7 = Eyebolts, center-to-center F = Total width G = Total height Single door enclosures. Details see page 1. Height dimensions in mm Width dimensions in mm Depth dimensions in mm Part No. H1 H2 H3 H4 H5 H6 H7 H8 H9 B1 B2 B3 B4 B5 B6 B7 B8 T1 T2 T3 T4 T5 T6 T7 F G Rittal Handbook /Industrial Enclosure Systems 131