Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U

Transcription

1 Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U Applications The High Density Cabinets are suitable for Central Offices and can be used as fiber nodes and termination points in the LAN, MAN and WAN area. The pre-assembled 19 swing frame allows the rear access to the fiber-optic units also at later date thus offering the possibility for network expansion. The Patch-cable Management System is designed for the swing frame and the patchcord slack storage with high capacity and flexibility allow the installation of fiberoptic units over the whole height of the frame. The Inter- Connection Guide system is designed to allow the interconnection between fiber-optic units in adjacent cabinets through the shortest path in an accessible and protected way. Features Dimensions: 900 x 300 mm (W x D) available in 3 heights: 1900, 2100 and 2300 mm Available in different pre-assembled variants. Pre-assembled 19 swing frame, 115, with stop system and locks. Pre-assembled rear wall, 3 section bottom-plate, 100 mm plinth and roof. 800 mm front door, 3mm security glass, aluminum framed, 180 hinged on the right, with foamed-in seal, comfort handle and semi-cylinder. 100 mm front door, sheet steel, 180 hinged on the left, with locking rod with adjacent cubicle latch mechanism. 2 mm sheet steel rear wall with foamed-in seal. 2 mm sheet steel side walls with foamed-in seal. 100 mm plinth with removable plates on all sides, prepared for installation of 4 levelling feets. Bottom-plate with adjustable opening on the left side (foam protected edges) for cable entry from the bottom. Roof plate with 2 adjustable depth slit on the left and right sides (foam protected edges) for cable entry and patchcable exit from the. Grounding of all metal parts via enclosure frame. 2 C-rails for installation of cable clamps mounted on the left side top and bottom. 2 punched rails mounted vertically on the left side. 1 punched rail mounted vertically on the rear side in the left corner. Patch-cable management material provided in adequate quantity. Reduced depth High Density Cabinet with Patch-cable Management System and Inter-Connection Guide Reduced depth High Density Cabinet with opened swing frame TEL: ( CORNING1), Fax , Date: February /5

2 Base Variants: left, with locking rod and latch mechanism. 19 swing frame, with 115 hinges (opening to the right), stop device and locks on top and bottom. Material: 2 mm sheet steel roof and rear wall with foamed-in seal, aluminum framed, glazed door of security glass, aluminum cabinet frame and 19 swing frame. Delivery scope: 1 housing with pre-assembled rear wall, roof, plinth, base plate, 800mm 180 glazed right door, 100mm 180 sheet steel left door, 115 swing frame with stop device, 2 C-rails on the left side, 2 punched rails on the left side and 1 on the rear side. Accessories: Side walls, Patch-cable Management System 900 x 1900 x 300 mm 36 U 900 x 2100 x 300 mm 40 U 900 x 2300 x 300 mm 45 U S46998-Z104-A61 HDC 3000/300, 36U High Density Cabinet 900 x 1900 x 300 mm 1/1 S46998-Z104-A60 HDC 3000/300, 40U High Density Cabinet 900 x 2100 x 300 mm 1/1 S46998-Z104-A62 HDC 3000/300, 45U High Density Cabinet 900 x 2300 x 300 mm 1/1 Accessories for base variants: Side walls, product description Routing guides Upper cable bridge Available for each cabinet dimensions. Material: 2 mm sheet steel with foamed-in seal Delivery scope: 2 walls with mounting materials Dimensions (HxD): 1800 x 300 mm, for HDC 3000/300, 36 U 2000 x 300 mm, for HDC 3000/300, 40 U 2200 x 300 mm, for HDC 3000/300, 45 U Patch-cable Management System, product description Universal Patchcord Management System fitting all HDC 3000/300 swing frame heights. Delivery scope: Feeder left panel with patchcable slack storage and prepunched holes for installation of routing guides and cable hoops, feeder right panel with prepunched holes for installation of routing guides and cable hoops, 2U upper cable bridge, 10 pcs. cable hoops, 10 pcs. routing guides. Feeder left Patch-cable slack storage 19 swing frame Feeder right Patch-cable Management System Cable hoops Date: February 2006 TEL: ( CORNING1), Fax , 2/5

3 Accessories, order information Quantity per sales unit: S46998-Z104-A74 Side walls 1800 Side walls HDC 3000/300, 36U, 1800 x 300 mm 2/1 S46998-Z104-A73 Side walls 2000 Side walls HDC 3000/300, 40U, 2000 x 300 mm 2/1 S46998-Z104-A75 Side walls 2200 Side walls HDC 3000/300, 45U, 2200 x 300 mm 2/1 S46998-A5-A340 PMS HDC 3000/300 Patch Management System HDC 3000/300 right 1/1 Pre-installed Variants, with Patch-cable Management System: left, with locking rod and latch mechanism. 19 swing frame, with 115 hinges (opening to the right), stop device and locks on top and bottom and preinstalled Patch-cable Management System. Material: 2 mm sheet steel roof and walls with foamed-in seal, aluminum framed glazed 800mm right door of security glass, sheet steel 100mm left door, aluminum cabinet frame and 19 swing frame. Delivery scope: 1 basic version with side walls mounted, feeder left/right and upper cable bridge mounted on the 19 swing frame, 2 C-rails on the left side, 2 punched rails on the left side and 1 on the rear side. 10 pcs. routing guides and 10 pcs. cable hoops. 900 x 2100 x 300 mm 38 U free 900 x 2300 x 300 mm 43 U free S46998-A5-A344 HDC 3000/300, 38U w/ PMS HDC 900 x 2100 x 300 mm w/ PMS 1/1 S46998-A5-A345-A HDC 3000/300, 43U w/ PMS HDC 900 x 2300 x 300 mm w/ PMS 1/1 Pre-installed Variants, with Patch-cable Management System and Inter-Connection Guide: left, with locking rod and latch mechanism. Swing frame, 19, with 115 hinges (opening to the right) installed on the bottom cable channel, stop device and lock on top with preinstalled Patch-cable Management System. Material: 2 mm sheet steel roof and walls with foamed-in seal, aluminum framed glazed 800mm right door of security glass, sheet steel 100mm left door, aluminum cabinet frame and 19 swing frame. Delivery scope: 1 Basic version with side walls mounted, feeder left/right and upper cable bridge mounted on the 19 swing frame, 2 C-rails on the left side, 2 punched rails on the left side and 1 on the rear side. 10 pcs. routing guides and 10 pcs. cable hoops. 900 x 2100 x 300 mm 32 U free 900 x 2300 x 300 mm 36 U free Date: February 2006 TEL: ( CORNING1), Fax , 3/5

4 S46998-A5-A419 HDC 3000/300, 32U, ICG HDC 900 x 2100 x 300 mm w/ PMS+ICG 1/1 S46998-A5-A418 HDC 3000/300, 36U, ICG HDC 900 x 2300 x 300 mm w/ PMS+ICG 1/1 Routing guides Upper cable bridge Feeder right Feeder left 19 swing frame Cable hoops Patch-cable slack storage Lower cable bridge Patch-cable channel Mounting shelf for swing frame Patch-cable Management System and Inter-Connection Guide Date: February 2006 TEL: ( CORNING1), Fax , 4/5

5 Accessories for all variants: Incoming cables management side enclosure Side enclosure for individual mangement of up to 50 incoming cables. Available for the 2300 mm height cabinets. Material: 2mm sheet steel roof and walls with foamed-in seal, sheet steel door with foamed-in seal, 180 hinged on the left, aluminum frame. Delivery scope: 1 housing with pre-assembled rear and left side wall, roof, plinth, base plate, 300mm sheet steel door with foamed-in seal, 180 hinged on the left, frame with rails for support of individually removable cable clamps. 300 x 2300 x 300 mm, for HDC 3000/300, 45 U High Density Cabinet reduced depth with Incoming cables management side enclosure On request Side enclosure HDC 3000/300, 45U Side enclosure HDC 300 x 2300 x 300 mm 1/1 Date: February 2006 TEL: ( CORNING1), Fax , 5/5