Standard for flexibility and future-oriented technology
|
|
- Howard Nicholson
- 7 years ago
- Views:
Transcription
1 Standard for flexibility and future-oriented technology
2 for tractors: The front hitch is designed in a way to be ideally integrated in the tractor Welded frame construction Construction is adjusted to the relevant tractor type Rocker arm made of special cast alloy Steel bushings with Teflon layer Double-acting lifting cylinder, mounted in ball joint quick coupling Cat.2/3 Solid lower links can easily be swivelled upwards without any tool, with large swing balance Lower links are compatible with front loader Towing fork in the middle, practical operation Switch valve single-acting/double acting or locked Hydraulic lines to the original control unit Time-saving and easy installation Holder for upper links optional vertical/ The Degenhart Front Power Take-Off is available in two executions: Two front p.t.o. executions (JD ): Short transmission with shaft displacement of 125 mm, gear ratio 1:2 Long transmission with shaft displacement of 254 mm, gear ratio 1:1.9 Fully and optimally integrated in the tractor Up to 150 kw power transmission Speed 1000 rpm p.t.o. stump movable to the left/right by 30 Direction of rotation to the right in driving direction Electro-hydraulic start via proportional valve Silent multiple disc clutch in oil bath Own oil supply with geared pump Soft start to spare machines is adjustable Emergency stop Time-saving and easy installation Can be retrofitted at any later date without problems Front p.t.o Technical details you ll find on the last side of this brochure! shaft displacement 125 mm shaft displacement 254 mm for tractors of series G, GF GV and 5E-series for tractors of series R/M and for tractors of series and for tractors of series and 8245, 8270, 8295, 8320, 8345R-series 2 3
3 External rear resp. front p.t.o. operation External operation from the right and from the left. For SE- or Premium tractors of the series 5020, 5000R/M, 6000, 6010 up to 8030, 8R with/without HMS. Two outside controllers. Hydraulics remote control For with command armrest for series 6020 to 7930, 8000, 8010, 8020, Or electric indepent control valve (EICV) 1. to 3. function for series 6020 to 7530 and 1. function for series. Municipal plate with front p.t.o. and attachment frame Municipal plate size 3 or 3/5 (shape B, DIN 76060) with towing eye and hole for p.t.o. Municipal plate DIN B 15 mm thick, size 3 or 3/5 with hole for p.t.o Multiple valve To switch to single-acting double-acting locked 7-pole socket This set includes two 7-pole sockets for mounting at the front hitch. The original socket at the tractor is replaced. In the set all required installation parts are included. BS44/66 Attachment bar For the rigid installation of municipal plate at the front hitch. Suitable for heavy-duty operation. Short upper and lower links For mobile installation of municipal plate at the front hitch. 15 screwing for hydraulic connections Connection screwing for control unit (t-shape) Screwing thread M 22 x 1.5. Internal screw thread and external screw thread with 12 L screwing (M 18 x 1.5) as a side exit. Universally adjustable by counter nut. Internal screw thread and External screw thread M 11 x 1.5. Universally adjustable by counter nut. More space in the area of upper link. The ideal accessory for hydraulic upper link. Attachment frame, divided For fixture of municipal plate at the tractor frame (without front hitch). Installation of a Front p.t.o. is possible. Attachment frame, boosted For fixture of municipal plate at the tractor frame (without front hitch). Installation of a Front p.t.o. is not possible. 4 5
4 Tractor triangle cat. 2 Front plate For mounting of tractor basic weight. series 5000 / 6000 / 7000 / 7010 Fixture for relieving springs Set of holders to fix the relieving springs. Incl. installation kit Front loader collision protection Front protection to prevent damage to the engine bonnet due to collisions in the course of front loader works and hitting the front loader linkage. Drill holes for relieving springs are included. (Fixture for example by means of shackle) To open the bonnet the protection can be folded off. Three-point-plate For mounting of tractor basic weight for series 5000 / 6000 / 7000 / Carried by tractor triangle. Cat. 2 Hydraulic connection at front A hydraulic line with coupling socket and dust protection cover to the front for supply of attachments at the front power lift. One set corresponds to 1 x single-acting hydraulic pipe. Oil cooler For the Front Power Take-Off. Provides better cooling for extreme operations. Ballast container without plate Filling weight with concrete 550 kg. Mounting of front attachment is possible. Triangle holde For mounting of 14 weight plates. Carried by tractor triangle. Cat. 2 Ballast container with plate (no fig.) Filling weight with concrete 550 kg. Mounting of front attachment and 14 weight plates is possible. Accumulator For road operation with/without pressure gage Fixture for upper link, front hitch Easy handling. Self-securing during fixture. Easy unlocking of security flap. Installation on the frame of front hitch or on the cover sheet. 6 7
5 Technical details / E R shipment G, GF, GV M S , 8270, , 8320, 8345R Front hitches category 2 or Lifting power at tail hook kg / 3500 / / Double-acting lifting cylinder optional serial serial serial serial serial serial serial Switch valve stop-cock serial serial serial serial serial serial serial Tail hook Lower links serial optional WS cat. 2 WS cat. 2 cat. 2 can easily be swivelled upwards without any tool Top link Cat. 2 Cat. 2 Cat. 2 Cat. 2 Cat. 2 Cat. 2 Cat. 2 Carrier for upper link vertical Cat. 2 / 3 heavy Push bar serial serial Power take off rpm 1000 rpm, right direction Max. power of p.t.o kw Continues power kw p.t.o. profile DIN / 8 vertical Fa. Degenhart 11 / 2011 The Ernst Degenhart GmbH reserves the right to change product specifications without prior notice. Design: Gewerbestr. 2 D Holzgünz-Schwaighausen Telephon +49 (0) / Fax: +49 (0) / info@degenhart-systeme.de
JOHN DEERE. Front Linkage Front PTO
Front Linkage Front PTO Great technology for the work in the field Optimum quality latest technology compact design use worldwide SAUTER Conception Development, production, sales and technical support
More informationMX R10 MX R16 MX R20 MX R28
FRONT LINKAGE MX R10 MX R16 MX R20 MX R28 User manual Please read carefully before using MX front linkage UK 361905 AC -1011 Original instructions Dear users, Thanks you for confidence in our product.
More informationSPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
More informationx60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
More informationFig 1 Power Transmission system of Tractor
POWER TRANSMISSION SYSTEM Transmission is a speed reducing mechanism, equipped with several gears (Fig. 1). It may be called a sequence of gears and shafts, through which the engine power is transmitted
More informationCX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
More informationNuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationTC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationTRACTOR QUICK HITCH CATEGORY I
TRACTOR QUICK HITCH CATEGORY I Assembly, Operation & Parts Manual January 2005 Form: Quickhitch.PM7 SAFETY INFORMATION To avoid accident or injury, do not allow anyone to operate this equipment without
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationOWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More information1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
More informationEXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
More informationRINGFEDER. Automatic Hook Couplings for Road and Cross Country Vehicles. TYPE RUwg. Prospect
RINGFEDER E 07 00 Prospect Automatic Hook Couplings for Road and Cross Country Vehicles TYPE RUwg Automatic Hook Couplings Types RUwg K O D, K 1 D, K 2 D, K 3 D, K 4 D for towing eye according to VG 74059
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationMACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More information5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
More information6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:
Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationKobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
More informationFOREWORD. Right and left as used throughout this manual are determined by facing the direction the machine will travel when in use.
FOREWORD The purpose of this manual is to assist you in operating and maintaining your Flail mower. Read it carefully before operating and maintaining the Flail mower, it furnishes the specifications,
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationOperating Instructions Hand pallet trucks HU Profi. Issue 08.2000
Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct
More informationBR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
More informationNEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55
NEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55 WORKMASTER Tractors Dependable power Available in 39 and 47 PTO horsepower, WORKMASTER tractors offer reliable power to handle a wide variety of chores.
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
More information1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
More informationTRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
More informationPTO OWNER S MANUAL ALLISON FAMILY CODE. pag.1
PTO OWNER S MANUAL FAMILY CODE ALLISON pag.1 CONTENTS GENERAL INFORMATION Safety information...3 OMFB P.T.O. Safety Label Instructions...6 Foreword...7 INSTALLATION INSTRUCTIONS Mounting the PTO on the
More informationCUTTER-CRUSHER RAMMER RC 22
11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics
More informationHC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationDR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationCAST GROUP s.r.l. Listino Prezzi Price List
CAST GROUP s.r.l. Listino Prezzi Price List Aggiornato al 01/06/2009 PIXY THE ARTICULATED TOOL-CARRIER & COMPACT LOADER CAST GROUP s.r.l. Via Taglio Sinistro 63/B 30035 Mirano (Venezia) Italia Tel 041/5701827
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationWith an excellent weight-to-power ratio of 37 kg/hp, the C-L model is ideal for general field work, as well as for PTO and transport applications.
Specially designed for farming applications with state-of-the-art technical solutions, the new Perkins engines meet the Tier 3 emission standards, while providing high power and torque levels with low
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationInformation and Instructions
Information and Instructions This shop manual contains several sections each covering a specific group of wheel type tractors. The Tab Index on the preceding page can be used to locate the section pertaining
More informationCooling system components, removing and installing
Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate
More informationC O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
More informationReplacement Spare Parts for FORD TRACTOR
(3650) POWER STEERING HYDRAULIC PUMP GEAR SET (9T.) (866) HYDRAULIC PUMP FRONT DRIVE GEAR (10T.) (C5NN 3A710 A/NUT) STRG. GEAR SHAFT MAIN NUT (C5NN 3A710 A/TUBE) STRG. GEAR SHAFT MAIN NUT TUBE (C5NN 3A710
More information18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
More informationMONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More information2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
More informationMAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
More informationOPERATING INSTRUCTIONS FOR ELECTRODE SHARPENING MACHINE WIG 4
OPERATING INSTRUCTIONS FOR ELECTRODE SHARPENING MACHINE WIG 4 Original Please keep for further use! Kaindl-Schleiftechnik REILING GmbH, D-75203 Königsbach-Stein, Remchinger Str. 4 Germany Tel.: +49 7232/4001-0,
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationCLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationTable of contents CAT DISC 25. Mower
Mower CAT DISC 25 ( Type PTM 370 : +.. 01001 ) Excerpt from operating manual Nr. 0370B00C.pdf Table of contents Swath Discs... 13 Swath Boards... 13 Safety points... 14 General maintenance hints... 14
More informationIntroduction... 2. Body Specifications... 3. Technical Data... 4. Body... 5. Interior Rear Seats... 6. Center Arm Rest... 7. Child Seat Restraint...
Table of Contents Subject Page Introduction.......................................... 2 Body Specifications.................................... 3 Technical Data........................................
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More informationexactly what is needed
JUNIOR For many years of low-maintenance drainpipe cleaning Of course you are familiar with the benefits of drainage in the field or in the greenhouse. Crops grow better and working conditions for preparing
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationWWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES
WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK PAGE 02 ENGLISH STATUS 01. 2013
More information1013 E. The engine for agricultural equipment.
1013 E. The engine for agricultural equipment.... -186 kw at 2300 rpm These are the characteristics of the 1013 E: Modern water-cooled 4- and 6-cylinder in-line engine Turbocharging with charge air cooling
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More information1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationTRACTORS A NEW EXCLUSIVE RANGE VEGA A NEW STAR IS BORN
TRACTORS A NEW EXCLUSVE RANGE A NEW STAR S BORN TECHNOLOGCALLY ADVANCED to optimize everyday life Our company has always strived for a coon goal: to build vehicles which fully satisfy the most exacting
More informationDYNAMIX COMPACT DISC HARROWS FOR TRACTORS FROM 100 TO 200 HP
DYNAMIX COMPACT DISC HARROWS FOR TRACTORS FROM 100 TO 200 HP DYNAMIX DYNAMIX KA RANGE OF COMPACT DISC HARROWS MAIN FEATURES www.rabe-gb.de STUBBLE CULTIVATION Todays farmers are facing new tasks: the ever-changing
More informationDR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More information4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty
4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The
More informationWorkholding systems. Magnetic clamping plates M-TECS SP 50 M-TECS SP 70
Workholding systems Magnetic clamping plates M-TECS SP 50 M-TECS SP 70 12/2010 M-TECS SP Magnetic clamping system M-TECS square poles for extremely heavy machining M-TECS square poles on a vertical machining
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationRaptor high-performance cone crushers
Raptor high-performance cone crushers Raptor high-performance cone crushers Key value statements Largest cone crusher in the world (Raptor 000) Most diverse product line on the market Continual focus on
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationPos. Qty. Article Description Price / Drilling capacity in steel 60 Ø 25 mm Tapping capacity M 20 Milling capacity in steel 60 150 cm³/min.
Offer 1 1 Vertical CNC-machining centre model FZ 12 W Magnum Completely refurbished pre-owned machine Updated in 2015 Year of construction: depends, weight 4.000 kg Scope of delivery: Column moving machining
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More information2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
More informationFLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B
Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter
More informationThe folding ROPS, available on the platform version, allows the operators to manoeuvre with ease when space is at a premium.
Available in the V (T3) series for vineyards and the F-N (T3) series for narrow orchards, this ultra-compact tractor range has been redesigned to offer improved gearbox controls, a new steering wheel with
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationPressure Relief Valves SPV, SPVF
Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting
More informationTABLE OF CONTENTS. Section 1 - Assembling your new pit bike.
Orion Pit Bike Sales Owners Manual (All information and content is the property of Orion Pit Bike Sales. Any attempt to copy or resell is a direct violation of our copyright. All violators will be prosecuted)
More information