Silver Nanowire Transparent Electrode Enhanced by Plasma and Graphene Oxide
|
|
- Norman Farmer
- 7 years ago
- Views:
Transcription
1 2014 AIMCAL in Europe Silver Nanowire Transparent Electrode Enhanced by Plasma and Graphene Oxide Sunghoon Jung Plasma Coating Research Group Korea Institute of Materials Science (KIMS)
2 Contents Introduction Trends of Electronics Silver Nanowire Applications of Plasma Technology Experimental Process Results and Discusstion Plasma Treatment on PET Substrate Plasma Treatment on Silver Nanowire Graphene Oxide on Silver Nanowire Silver Nanowire Enhanced by Plasma/Graphene Oxide Summary - 2 -
3 Flexible Electronics Portable Wearable Light Small Fast Multi functional Flexible, deformable, bendable! - 3 -
4 Key Issues for Flexible Electronics ITO T:>90%, R:<10Ω/sq. Graphene T:90%, R:60Ω/sq. Conducting Polymer T:90%, R:100Ω/sq. Flexible optoelectronic devices (touch panel, display, solar cell, etc.) Metal Nanowire T:90%, R:~10Ω/sq. High quality transparent conductive electrode - 4 -
5 Ag Nanowire Cambrios ClearOhm TM Pros Cons High conductivity High transparency High flexibility Low cost (20% cheaper than ITO) Solution process Low environmental stability High roughness Hazeness Poor adhesion - 5 -
6 Ag Nanowire Hybrid Electrode [Kyung Hee Univ, Prof. Kim] [KIMS, Dr. Song] R s : 6.95 Ω/, T: 84.78% (550 nm) K. H. Choi et al. Sol. Energy Mater. Sol. Cells (2013) M. Song et al., Adv. Funct. Mater. (2013) - By inserting Ag NW between thin ITO films, a flexible electrode with high conductivity and high transmittance was developed. - Flexible organic solar cells on Ag NW electrode was developed by solution process
7 Ag Nanowire Hybrid Electrode [UNIST, Prof. J.W. Park] 33 94% (in visible range) M.S. Lee et al., Nano Lett. (2013) - Low sheet resistance, high transmittance - Robust stability against electric breakdown and oxidation - Superb flexibility (27% in bending strain), stretchability (100% tensile strain) - 7 -
8 Ag Nanowire Hybrid Electrode [Sungkyunkwan Univ. & Samsung] 44 AgNW+GO film I. Moon et al., Scientific Reports (2013) - A large-area, flexible, and highly transparent Ag NW TCF was developed by solution process and plasma treatment
9 Plasma/GO Enhanced Ag NW Surface Energy Control Removing Dispersant Agent Reduction of Graphene Oxide High Conductivity High Flexibility Decrease Surface Roughness Ease of Process Decrease Electrical Resistance Increase Stability - 9 -
10 Plasma Technology Surface Energy Control Nano Texturing Oxidation, Nitration and Reduction Deposition - By controlling gas species and energy, physical and chemical properties of surface can be changed
11 Plasma Technology 1.5 m Linear Ion Source - Our group has various plasma source. Especially, linear ion and electron beam source are used in this experiment
12 Plasma/GO Enhanced Ag NW Plasma Treatment on Silver Nanowire Plasma Treatment on Substrate Plasma/GO Enhanced Silver Nanowire Graphene Oxide over-coated Silver Nanowire
13 Substrate Wettability Control by Plasma Plasma PET Bare PET After O 2 plasma - Water contact angle of PET is decreased from 53 o to 23 o by O 2 plasma treatment. - Coating uniformity of silver nanowire is improved
14 Substrate Wettability Control by Plasma Plasma PET Bare PET After O 2 plasma - Water contact angle of PET is decreased from 53 o to 23 o by O 2 plasma treatment. - Coating uniformity of silver nanowire is improved
15 Ag NW Plasma Treatment Plasma PET AgNW 2 um Before Ω/ Ω/ 31.4 Ω/ 28.6 Ω/ After Ω/ Ω/ 29.6 Ω/ 24.9 Ω/ - The sheet resistance decreases as the density of AgNW increases and after plasma treatment, the sheet resistance decreases about 10% in whole density
16 Resistance Change [%] Ag NW Plasma Treatment Enhancing Damage Plasma PET AgNW Applied Voltage [V] - Low energy ions don t affect the silver nanowire. - Electrical properties of silver nanowire is improved at specific section between 2.5 and 3.5 kv of applied voltage. - Silver nanowire are damaged and increased sheet resistance at high applied voltage section
17 Resistance Change [%] Ag NW Plasma Treatment 85 o C, 85% Ag NW Plasma Enhanced Ag NW 107% PET AgNW Plasma 20 25% AgNW 0 PET Time [days] - Stability of plasma treated silver nanowire is improved enormously
18 Sheet Resistance [ohm/sqr.] 550 nm [%] GO over-coating on Ag NW Spray GO PET AgNW AgNW AgNW/GO Number of GO Spray 2 um - Thickness of graphene oxide is increases, the transmittance is decreased. - Sheet resistance is reduced with thin thickness graphene oxide
19 GO over-coating on Ag NW PET GO AgNW Ra = 16.3 nm 13.4 nm 12.3 nm Ag NW Ag NW/GO 1 Ag NW/GO nm 9.1 nm 5.9 nm Ag NW/GO 4 Ag NW/GO 8 Ag NW/GO 16 - Thickness of graphene oxide is increases, the surface roughness is decreased
20 Resistance Change [%] GO over-coating on Ag NW Ag NW/GO 0 Ag NW/GO 1 Ag NW/GO 2 Ag NW/GO 4 Ag NW/GO 8 Ag NW/GO 85 o C, 85% Time [days] - Stability of silver nanowire which is over-coated 1 time of graphene oxide is improved, but the others are deteriorated. - Hygroscopicity of graphene oxide cause an increment of sheet resistance of silver nanowire
21 Ratio [%] Plasma/GO Enhanced Ag NW Plasma GO C-OH C-C/C=C PET AgNW C-O-C cps [a.u.] C=O O=C-OH H 2 treated GO O=C-OH C=O C-O-C C-OH 40 C-C/C=C untreated GO Binding Energy [ev] untreated GO H2 treated GO Samples - Graphene oxide is successfully reduced by H 2 plasma. - Reducing process takes less than a minute for reducing graphene oxide and is performed at room temperature
22 Resistance Change [%] Plasma/GO Enhanced Ag NW Ag NW/GO 0 Ag NW/GO 1 Ag NW/GO 16 PE Ag NW/GO 0 PE Ag NW/GO 1 PE Ag NW/GO 85 o C, 85% % Time [days] - The change of sheet resistance in damping lifetime test is less than 20% for thin graphene oxide over-coated silver nanowire for 50 days at 85 o C of temperature and 85% of humidity. - Stability of plasma and graphene oxide enhanced silver nanowire is improved enormously due to removed hygroscopicity of graphene oxide
23 Summary Increase Wettability Increase Stability The wettability control for hydrophilicity of substrate which is essential for uniform coating of Ag NW is performed by atmospheric plasma. The electrical conductivity and stability of Ag NW are improved by plasma treatment. A few nanometers of over-coated graphene oxide on silver nanowire can improved the electrical resistance of Ag NW electrode. Decrease Surface Roughness Decrease Electrical Resistance Increase Stability High Conductivity High Flexibility Ease of Process Plasma and graphene oxide enhanced Ag NW electrode has 10% reduction in sheet resistance and can withstand more than 5 times in extreme condition compared with only Ag NW
24 Thank you Dr. Do-Geun Kim Dr. Byoung-Joon Kim Seunghun Lee
1. PECVD in ORGANOSILICON FED PLASMAS
F. FRACASSI Department of Chemistry, University of Bari (Italy) Plasma Solution srl SURFACE MODIFICATION OF POLYMERS AND METALS WITH LOW TEMPERATURE PLASMA OUTLINE METAL TREATMENTS 1 low pressure PECVD
More informationFlexible Touch-Panels for Flexible Displays
Flexible Touch-Panels for Flexible Displays Geoff Walker Owner & Principal Consultant Walker Mobile, LLC Download file from: www.walkermobile.com/publishedmaterial.htm v1.1 1 What / Who is Walker Mobile,
More informationSupporting information
Supporting information Ultrafast room-temperature NH 3 sensing with positively-gated reduced graphene oxide field-effect transistors Ganhua Lu 1, Kehan Yu 1, Leonidas E. Ocola 2, and Junhong Chen 1 * 1
More informationPerformance of Carbon-PTFE Electrodes and PTFE Separators in Electrochemical Double Layer Capacitors (EDLCs)
Performance of Carbon-PTFE Electrodes and PTFE Separators in Electrochemical Double Layer Capacitors (EDLCs) David Zuckerbrod, Robert Sassa, Marianne Szabo, Meagan Mizenko Abstract: W. L. Gore & Associates
More informationStrategy for Functional Material Development in FUJIFILM
証券コード 4901 Strategy for Functional Material Development in FUJIFILM - Global competency strategy for business innovation in Functional Material Industry - Sep. 24, 2013 FUJIFILM Corporation Development
More informationBarrier Coatings: Conversion and Production Status
Transparent SiO 2 Barrier Coatings: Conversion and Production Status E. Finson and J. Felts, Airco Coating Technology, Concord, CA Keywords: Permeation barrier coatings; Reactive evaporation; SiO 2 ABSTRACT
More informationChapter 6 Metal Films and Filters
Chapter 6 Metal Films and Filters 6.1 Mirrors The first films produced by vacuum deposition as we know it were aluminum films for mirrors made by John Strong in the 1930s; he coated mirrors for astronomical
More informationCoating Technology: Evaporation Vs Sputtering
Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information
More informationUltrahigh-efficiency solar cells based on nanophotonic design
Ultrahigh-efficiency solar cells based on nanophotonic design Albert Polman Piero Spinelli Jorik van de Groep Claire van Lare Bonna Newman Erik Garnett Marc Verschuuren Ruud Schropp Wim Sinke Center for
More informationDemonstration of sub-4 nm nanoimprint lithography using a template fabricated by helium ion beam lithography
Demonstration of sub-4 nm nanoimprint lithography using a template fabricated by helium ion beam lithography Wen-Di Li*, Wei Wu** and R. Stanley Williams Hewlett-Packard Labs *Current address: University
More informationLaboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014
Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014 Introduction Following our previous lab exercises, you now have the skills and understanding to control
More informationWW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
More informationOLED display. Ying Cao
OLED display Ying Cao Outline OLED basics OLED display A novel method of fabrication of flexible OLED display Potentials of OLED Suitable for thin, lightweight, printable displays Broad color range Good
More informationNew Transparent High-Barrier Film for Advanced Retort Applications
New Transparent High-Barrier Film for Advanced Retort Applications Tatsuya Oshita KURARAY CO., LTD ABSTRACT KURARISTER TM, which is henceforth called Hybrid film, is a new transparent high-barrier film
More informationDew-Point Measurement Solutions
Dew-Point Measurement Solutions www.michell.com Dew-Point Measurement Solutions Special Features No downtime Michell Instruments offers a unique sensor exchange programme, which means that you will never
More informationNanoparticle Deposition on Packaging Materials by the Liquid Flame Spray
Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray Hannu Teisala a, Mikko Tuominen a, Mikko Aromaa b, Jyrki M. Mäkelä b, Milena Stepien c, Jarkko J. Saarinen c, Martti Toivakka c
More informationVacuum Evaporation Recap
Sputtering Vacuum Evaporation Recap Use high temperatures at high vacuum to evaporate (eject) atoms or molecules off a material surface. Use ballistic flow to transport them to a substrate and deposit.
More informationFor Touch Panel and LCD Sputtering/PECVD/ Wet Processing
production Systems For Touch Panel and LCD Sputtering/PECVD/ Wet Processing Pilot and Production Systems Process Solutions with over 20 Years of Know-how Process Technology at a Glance for Touch Panel,
More informationElectroluminescent Materials
Electroluminescent Materials Electroluminescent Materials Overview. Product Range. GEM s products are based on a unique curing process that results in the low temperature formation of a thermosetting polymer
More informationTechnical Synopsis of Plasma Surface Treatments
Technical Synopsis of Plasma Surface Treatments Wesley Taylor Advisor: Dr. Bruce Welt University of Florida, Gainesville, FL December, 2009 Abstract Surface treatment technology delves into some of the
More informationMaterials for Organic Electronic. Jeremy Burroughes FRS FREng
Materials for Organic Electronic Applications Jeremy Burroughes FRS FREng Introduction Organic Thin Film Transistors Organic Solar Cells and Photodiodes All Printed OLED Summary 4k2k 56 Displays Panasonic
More informationScotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
More informationLight management for photovoltaics. Ando Kuypers, TNO Program manager Solar
Light management for photovoltaics Ando Kuypers, TNO Program manager Solar Global energy consumption: 500 ExaJoule/Year Solar irradiation on earth sphere: 5.000.000 ExaJoule/year 2 Capturing 0,01% covers
More informationA Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators
A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators Dr Peter Hockley and Professor Mike Thwaites, Plasma Quest Limited
More informationHSMG. There is only one true graphene. www.advancedgrapheneproducts.com
HSMG TM There is only one true graphene www.advancedgrapheneproducts.com 03. 05. 13. 20. 02 Graphene About AGP About HSMG Collaboration and contact What is graphene Graphene is a flat structure built with
More informationResearch in Nanotechnologies and Sensing
Eemeli työpaja nro 12, Micronova Research in Nanotechnologies and Sensing Tapani Ryhänen Nokia Research Center, Sensor and Material Technologies Laboratory (Cambridge, Otaniemi, Skolkovo) November 12,
More informationTransparent conducting sol gel ATO coatings for display applications by an improved dip coating technique
Transparent conducting sol gel ATO coatings for display applications by an improved dip coating technique G. Guzman a, *, B. Dahmani b, J. Puetz c, M.A. Aegerter c a Corning S.A., Centre Européen de Recherche
More informationL ENEA e la ricerca di sistema elettrico: il fotovoltaico innovativo. Sviluppo di ossidi trasparenti e conduttivi mediante processo Sol-Gel
L ENEA e la ricerca di sistema elettrico: il fotovoltaico innovativo UNIVERSITA NAPOLI FEDERICO II Dipartimento di Ingegneria dei Materiali e della Produzione Sviluppo di ossidi trasparenti e conduttivi
More informationNeal O Hara. Business Development Manager
Neal O Hara Business Development Manager PCS OFFERING User Interface Flex Circuit Solutions Sensor Systems Multilayer Copper Flex Circuits LED Lighting 2 VERTICAL INTEGRATION FPC Connector Picoflex on
More informationSilicone Rubber Thermal Interface Materials: Applications and Performance Considerations
Silicone Rubber Thermal Interface Materials: Applications and Performance Considerations David C. Timpe Jr. Arlon Silicone Technologies Division 1100 Governor Lea Road, Bear, DE 19701 P: 800-635-9333 F:
More informationIan Jones, TWI Ltd (ian.jones@twi.co.uk) Energy Harvesting 2015 19 March 2015, London
Ian Jones, TWI Ltd (ian.jones@twi.co.uk) Energy Harvesting 2015 19 March 2015, London Powerweave: the concept FP7 European project Development of Textiles for Electrical Energy Generation and Storage Objectives:
More information2. Deposition process
Properties of optical thin films produced by reactive low voltage ion plating (RLVIP) Antje Hallbauer Thin Film Technology Institute of Ion Physics & Applied Physics University of Innsbruck Investigations
More informationOptical Customisation of Touch Screens and Display Front Surfaces
Optical Customisation of Touch Screens and Display Front Surfaces Society for Information Display March 2013 Rob Bennett Europe Summary Performance characteristics that can be altered : contrast and readability
More informationImproving Printability of Functional Materials by. Laboratory of Paper Coating and Converting Martti Toivakka and Jouko Peltonen
Improving Printability of Functional Materials by Controlled Substrate Topography and Chemistry Laboratory of Paper Coating and Converting Martti Toivakka and Jouko Peltonen Printed functionality & Paper
More informationThe Effects of Corona and Flame Treatment: Part 1. PE-LD Coated Packaging Board
TAMPERE UNIVERSITY OF TECHNOLOGY Institute of Paper Converting Part 1. PE-LD Coated Packaging Board Mikko Tuominen & Johanna Lahti Session 12.4 Introduction Extrusion coated paperboards are applied successfully
More informationHexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
More informationExploring the deposition of oxides on silicon for photovoltaic cells by pulsed laser deposition
Applied Surface Science 186 2002) 453±457 Exploring the deposition of oxides on silicon for photovoltaic cells by pulsed laser deposition Lianne M. Doeswijk a,*, Hugo H.C. de Moor b, Horst Rogalla a, Dave
More informationBasic Properties and Application of Auto Enamels
Basic Properties and Application of Auto Enamels Composition of Ceramic Automotive Glass Enamels Ceramic automotive glass colours are glass enamels that fire on to the glass during the bending process
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More informationHigh-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
More informationUltra-high Barrier Plastic. MSE5420 Flexible Electronics Martin Yan, GE Global Research
Ultra-high Barrier Plastic MSE5420 Flexible Electronics Martin Yan, GE Global Research Outline Introduction to plastic substrate and need for barrier Barrier technologies WVTR measurement technologies
More information82 CONDUCTIVE TAPES SHEETS
82 CONDUCTIVE TAPESSHEETS CONDUCTIVE FABRIC Conductive fabric tape Conductive fabric P83 CONDUCTIVE FABRIC TAPE METAL FOIL P84 CONDUCTIVE FABRIC TAPE Low-resistivity type using embossed metal foil and
More informationIII. Wet and Dry Etching
III. Wet and Dry Etching Method Environment and Equipment Advantage Disadvantage Directionality Wet Chemical Solutions Atmosphere, Bath 1) Low cost, easy to implement 2) High etching rate 3) Good selectivity
More informationChapter 4 Indium Tin Oxide Films Deposited by d.c. Sputtering
Chapter 4 Indium Tin Oxide Films Deposited by d.c. Sputtering 4.1. Introduction Indium-tin-oxide (ITO) thin films are widely used in optoelectronics devices, flat panel display and electrochromic (EC)
More informationTHIN FILM MATERIALS TECHNOLOGY
THIN FILM MATERIALS TECHNOLOGY Sputtering of Compound Materials by Kiyotaka Wasa Yokohama City University Yokohama, Japan Makoto Kitabatake Matsushita Electric Industrial Co., Ltd. Kyoto, Japan Hideaki
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationTypes of Epitaxy. Homoepitaxy. Heteroepitaxy
Epitaxy Epitaxial Growth Epitaxy means the growth of a single crystal film on top of a crystalline substrate. For most thin film applications (hard and soft coatings, optical coatings, protective coatings)
More informationThrough-mask Electro-etching for Fabrication of Metal Bipolar Plate Gas Flow Field Channels
991 Downloaded 23 Dec 21 to 24.16.113.125. Redistribution subject to ECS license or copyright; see http://www.ecsdl.org/terms_use.jsp ECS Transactions, 33 (1) 991-16 (21) 1.1149/1.3484593 The Electrochemical
More informationWR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
More informationSolar Photovoltaic (PV) Cells
Solar Photovoltaic (PV) Cells A supplement topic to: Mi ti l S Micro-optical Sensors - A MEMS for electric power generation Science of Silicon PV Cells Scientific base for solar PV electric power generation
More informationMARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES
Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM
More informationChapter 4 COATINGS Full Reflective Coatings:
Chapter 4 COATINGS Technical developments in coatings for plastic optics have resulted in optical and durability characteristics once believed possible only with glass. These advances in coating technology
More informationCoating Thickness and Composition Analysis by Micro-EDXRF
Application Note: XRF Coating Thickness and Composition Analysis by Micro-EDXRF www.edax.com Coating Thickness and Composition Analysis by Micro-EDXRF Introduction: The use of coatings in the modern manufacturing
More informationPhysical Properties and Functionalization of Low-Dimensional Materials
Physical Properties and Functionalization of Low-Dimensional Materials Physics Department, University of Trieste Graduate School of Physics, XXVI cycle Supervisor: Co-supervisor: Prof. Alessandro BARALDI
More informationDry Etching and Reactive Ion Etching (RIE)
Dry Etching and Reactive Ion Etching (RIE) MEMS 5611 Feb 19 th 2013 Shengkui Gao Contents refer slides from UC Berkeley, Georgia Tech., KU, etc. (see reference) 1 Contents Etching and its terminologies
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationHigh Rate Oxide Deposition onto Web by Reactive Sputtering from Rotatable Magnetrons
High Rate Oxide Deposition onto Web by Reactive Sputtering from Rotatable Magnetrons D.Monaghan, V. Bellido-Gonzalez, M. Audronis. B. Daniel Gencoa, Physics Rd, Liverpool, L24 9HP, UK. www.gencoa.com,
More informationE F G. Overview of the activities. SAPIE ZA Università di Roma - Laboratorio di Fotonica Molecolare
SAPIE ZA Università di Roma Dipartimento di Energetica Laboratorio di Fotonica Molecolare Francesco Michelotti E-Mail: francesco.michelotti@uniroma1.it Tel: +39 06-49.91.65.62 Workshop Future Trends in
More informationSputtered AlN Thin Films on Si and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties
Sputtered AlN Thin Films on and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties S. Mishin, D. R. Marx and B. Sylvia, Advanced Modular Sputtering,
More informationPOLYMER BASED PHOTOVOLTAICS
PLYMER BASED PHTVLTAICS Novel concepts, materials and state-of-the-art performances Jan Kroon Semiconducting polymers Nobel Prize Chemistry 2000 (Alan J. Heeger, Alan G. MacDiarmid, Hideki Shirakawa) Conducting
More informationIXOLAR TM High Efficiency SolarMD.
IXOLAR TM High Efficiency SolarMD. Description IXOLAR TM SolarMD is an IXYS product line of Solar Module made of monocrystalline, high efficiency solar cells. The IXOLAR TM SolarMD is an ideal for charging
More informationCharacteristics of silicon oxide thin films prepared by sol electrophoretic deposition method using tetraethylorthosilicate as the precursor
Available online at www.sciencedirect.com Current Applied Physics 9 (2009) 551 555 www.elsevier.com/locate/cap www.kps.or.kr Characteristics of silicon oxide thin films prepared by sol electrophoretic
More informationDespite spending many thousands of pounds on a beautiful new conservatory, it is a sad fact that many suffer from intolerable heat and glare problems
Despite spending many thousands of pounds on a beautiful new conservatory, it is a sad fact that many suffer from intolerable heat and glare problems during the summer making them virtually unusable for
More informationPotentials of Aerosoljet Printing for Manufacturing 3-D MID
Prof. Dr.-Ing. Joerg Franke Institute for Factory Automation and Production Systems Potentials of Aerosoljet Printing for Manufacturing 3-D MID Friedrich-Alexander-University Erlangen-Nuremberg PEP - Centre
More informationPulsed laser deposition of organic materials
Pulsed laser deposition of organic materials PhD theses Gabriella Kecskeméti Department of Optics and Quantum Electronics University of Szeged Supervisor: Dr. Béla Hopp senior research fellow Department
More informationMylar polyester film. Electrical Properties. Product Information. Dielectric Strength. Electrode Size. Film Thickness
Product Information Mylar polyester film Electrical Properties Mylar offers unique design capabilities to the electrical industry due to the excellent balance of its electrical properties with its chemical,
More informationOLED: A New Display Technology Aditi Khazanchi,Akshay Kanwar, LOVENISH SALUJA, AAKASH DAMARA,VIKAS DAMARA
www.ijecs.in International Journal Of Engineering And Computer Science ISSN:2319-7242 Volume1 Issue 2 Nov 2012 Page No. 75-84 OLED: A New Display Technology Aditi Khazanchi,Akshay Kanwar, LOVENISH SALUJA,
More informationThe effect of film thickness on physical properties of fluorine-doped indium oxide thin films
Materials Science-Poland, Vol. 22, No. 2, 2004 The effect of film thickness on physical properties of fluorine-doped indium oxide thin films S. M. ROZATI *, T. GANJ Physics Department, University of Guilan,
More informationScotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
More information07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
More informationMicro-Power Generation
Micro-Power Generation Elizabeth K. Reilly February 21, 2007 TAC-meeting 1 Energy Scavenging for Wireless Sensors Enabling Wireless Sensor Networks: Ambient energy source Piezoelectric transducer technology
More informationLight management for photovoltaics using surface nanostructures
Light management for photovoltaics using surface nanostructures Roberta De Angelis Department of Industrial Engineering and INSTM, University of Rome Tor Vergata New Materials For Optoelectronics webnemo.uniroma2.it
More informationSony LTO Data Media Storage Tapes
Sony LTO Data Media Storage Tapes Speed. Durability. Compatibility. Reliability. Time-tested innovative technology Sony LTO media has been tested to meet and exceed even the most intense storage conditions.
More informationTechnical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
More informationNanofabrication using anodic alumina templates. IFIMUP and IN Institute of Nanoscience and Nanotechnology
Nanofabrication using anodic alumina templates João Pedro Araújo IFIMUP and IN Institute of Nanoscience and Nanotechnology Outline Template based nanofabrication Nanoporous alumina templates Template filling
More informationHow compact discs are made
How compact discs are made Explained by a layman for the laymen By Kevin McCormick For Science project at the Mountain View Los Altos High School Abstract As the major media for music distribution for
More informationInternational Journal of Multidisciplinary Research and Modern Education (IJMRME) ISSN (Online): 2454-6119 (www.rdmodernresearch.org) Volume I, Issue
STUDIES ON OPTICAL AND STRUCTURAL PROPERTIES OF Ag2S FILMS PREPARED BY CHEMICAL BATH DEPOSITION METHOD Goverdhan Yadu*, K. K. Pathak**, Kusumanjali Deshmukh*** & Mini A. Pateria*** * Govt. Rajeev Lochan
More informationGREEN NANOTECHNOLOGY. Geoffrey. Energy in the Built Environment. Solutions for Sustainability and. B. Smith Claes G. Granqvist.
GREEN NANOTECHNOLOGY Solutions for Sustainability and Energy in the Built Environment Geoffrey B. Smith Claes G. Granqvist CRC Press Taylor & Francis Group Boca Raton London NewYork CRC Press is an imprint
More informationHow To Make A Plasma Control System
XXII. Erfahrungsaustausch Mühlleiten 2015 Plasmaanalyse und Prozessoptimierung mittels spektroskopischem Plasmamonitoring in industriellen Anwendungen Swen Marke,, Lichtenau Thomas Schütte, Plasus GmbH,
More informationPhosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
More informationDeposition of Conducting Oxide Thin Films as Anode for Solar Cell Device
British Journal of Applied Science & Technology 4(5): 739-748, 2014 SCIENCEDOMAIN international www.sciencedomain.org Deposition of Conducting Oxide Thin Films as Anode for Solar Cell Device N. Mustapha
More informationCombustion chemical vapor deposition
V I P Combustion chemical vapor deposition A technology to improve adhesion on surfaces to be coated Volkmar J. Eigenbrod, Christina Hensch, Alexander Kemper Introduction Combustion chemical vapor deposition
More informationLaser hole drilling and texturing (for joining) of composites
AILU Workshop: Laser processing of polymer, metal and cerramic composites Laser hole drilling and texturing (for joining) of composites Dr Paul French Photonics in Engineering Research Group General Engineering
More informationComprehensive Investigation of Sequential Plasma Activated Si/Si Bonded Interface for Nano-integration
Comprehensive Investigation of Sequential Plasma Activated Si/Si Bonded Interface for Nano-integration M G Kibria, F Zhang, T H Lee, M J Kim and M M R Howlader Dept. Electrical and Computer Engineering,
More informationh e l p s y o u C O N T R O L
contamination analysis for compound semiconductors ANALYTICAL SERVICES B u r i e d d e f e c t s, E v a n s A n a l y t i c a l g r o u p h e l p s y o u C O N T R O L C O N T A M I N A T I O N Contamination
More informationDesign qualification and type approval of PV modules
Design qualification and type approval of PV modules TÜV Immissionsschutz und Energiesysteme GmbH Test Centre for Energy technologies May 2003 Design qualification and type approval of PV-modules in accordance
More informationPIEZOELECTRIC FILMS TECHNICAL INFORMATION
PIEZOELECTRIC FILMS TECHNICAL INFORMATION 1 Table of Contents 1. PIEZOELECTRIC AND PYROELECTRIC EFFECTS 3 2. PIEZOELECTRIC FILMS 3 3. CHARACTERISTICS PROPERTIES OF PIEZOELECTRIC FILMS 3 4. PROPERTIES OF
More informationRelative Humidity Sensors, Transmitters and Calibration Products Relative Humidity Measurement and Calibration
Relative Humidity Measurement and Calibration The widest range of humidity products from a pioneer of RH sensor development The best in Relative Humidity technology to optimize your process Whether you
More informationIntroduction to OLED technology 1. General characteristics
www.osram-oled.com Introduction to OLED technology 1. General characteristics 1.1. Structure An organic light-emitting diode (OLED) consists of several semiconducting organic layers sandwiched between
More informationhistaris Inline Sputtering Systems
vistaris histaris Inline Sputtering Systems Inline Sputtering Systems with Vertical Substrate Transport Modular System for Different Applications VISTARIS Sputtering Systems The system with the brand name
More informationA thermal cure is then applied to obtain final properties of the paint film.
CHARACTERIZATION OF OXIDE LAYERS FORMED ON ALUMINUM ALLOYS DURING NEW PPG ELECTRODEPOSITED STRUCTURAL PAINT ECODESIGN - GRANT AGREEMENT N 267285 Dr Marion Collinet Ecole Nationale Supérieure de Chimie
More informationPlasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology
Precision Fair 2013 Stand 171 Plasma Electronic is Partner of Tailor-Made Surfaces by Plasma Technology Dr. J. Geng, Plasma Electronic GmbH Modern Surface Technology in 1900 Overview A short introduction
More informationSpecial materials. for Precision Optics & Laser Coatings. Oxides for Evaporation
Special materials for Precision Optics & Laser Coatings Oxides for Evaporation Titanium oxides Highest refractive index of oxides in visible range AR and multilayer coatings on glass and polymers Best
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationUse of Carbon Nanoparticles for the Flexible Circuits Industry
Use of Carbon Nanoparticles for the Flexible Circuits Industry Ying (Judy) Ding, Rich Retallick MacDermid, Inc. Waterbury, Connecticut Abstract FPC (Flexible Printed Circuit) has been growing tremendously
More informationBasic Designs Of Flex-Rigid Printed Circuit Boards
PCBFABRICATION Basic Designs Of Flex-Rigid Printed Circuit Boards Flex-rigid boards allow integrated interconnection between several rigid boards. This technology helps to reduce the number of soldered
More informationElectron Beam and Sputter Deposition Choosing Process Parameters
Electron Beam and Sputter Deposition Choosing Process Parameters General Introduction The choice of process parameters for any process is determined not only by the physics and/or chemistry of the process,
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationEnhancement of Breakdown Strength and Energy Density in
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2014 Electronic Supplementary Information Enhancement of Breakdown Strength and Energy Density in
More informationPLASMA TECHNOLOGY OVERVIEW
PLASMA TECHNOLOGY OVERVIEW Plasmas are not a lab curiosity. Plasma processing has been an essential production tool for more than 30 years in the fabrication of microelectronic devices for example. Over
More information