RV - Series. Rotary Vane Valve Actuators Actuator Specifications & Dimensional Data
|
|
|
- Paulina Craig
- 7 years ago
- Views:
Transcription
1 RV - Series Rotary Vane Valve Actuators Actuator Specifications & Dimensional Data METRIC UNITS Dimensions : Centimeters (cm) Torque: Newton Meters (N-m) Pressure: Bar Weight: Kilograms (kg) Volume: Cubic Centimeters (cm 3 ) Liters (L)
2 NOTE: Bolt circle, rotor bore, keyway quantity and size of mounting holes for RV-Series actuators will be custom fitted to specific valve. All dimensional data is subject to change. ALL DIMENSIONS SHOWN IN CENTIMETERS. 1/4 NPTF PORTS /2 x 2 ROTARY VANE ACTUATOR Torque output Nm/bar Maximum working pressure 103 bar Maximum test pressure 207 bar Maximum acceptable valve stem 6.66 cm. diameter Maximum wrench square 5.08 cm. across flats Weight of actuator including hydraulic fluid 17.7 kg. Actual fluid displacement per 90 stroke equals 0.34 L Gas consumption per 90 stroke equals 0.6 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals ¼ NPTF PO RTS ½ x 3½ ROTARY VANE ACTUATOR Torque output 32.8 Nm/bar Maximum test pressure bar Maximum acceptable valve stem 6.67 cm. diameter Maximum wrench square 5.08 cm. across flats Weight of actuator including hydraulic fluid 42.6 kg. Actual fluid displacement per 90 stroke equals.60 l Gas consumption per 90 stroke equals 0.2 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals ¼ NPTF PO RTS ½ x 8 ROTARY VANE ACTUATOR Torque output Nm/bar Maximum test pressure bar Maximum acceptable valve stem 6.67 cm. diameter Maximum wrench square 5.08 cm. across flats Weight of actuator including hydraulic fluid 63.5 kg. Actual fluid displacement per 90 stroke equals 1.34 L Gas consumption per 90 stroke equals 0.2 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals 21. 3/8 NPTF PO RTS x 7 ROTARY VANE ACTUATOR Torque output Nm/bar Maximum test pressure bar Maximum acceptable valve stem 9.53 cm. diameter Maximum wrench square 6.35 cm. across flats Weight of actuator including hydraulic fluid kg. Actual fluid displacement per 90 stroke equals 2.05 L Gas consumption per 90 stroke equals 0.4 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals 32.
3 NOTE: Bolt circle, rotor bore, keyway quantity and size of mounting holes for RV-Series actuators will be custom fitted to specific valve. All dimensional data is subject to change. ALL DIMENSIONS SHOWN IN CENTIMETERS. 3/8 NPTF PO RTS x 12 ROTARY VANE ACTUATOR Torque output Nm/bar Maximum test pressure bar Maximum acceptable valve stem 9.53 cm. diameter Maximum wrench square 6.35 cm. across flats Weight of actuator including hydraulic fluid kg. Actual fluid displacement per 90 stroke equals 3.7 L Gas consumption per 90 stroke equals 0.6 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals /2 NPTF PORTS (shown plugged) ½ x 8 ROTARY VANE ACTUATOR Torque output 306 Nm/bar Maximum working pressure 103 bar Maximum test pressure 199 bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid kg. Actual fluid displacement per 90 stroke equals 5.36 L Gas consumption per 90 stroke equals 0.92 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals /2 NPTF PO RTS (shown plugged) ½ x 12 ROTARY VANE ACTUATOR Torque output Nm/bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Maximum wrench square 8.26 cm. across flats Weight of actuator including hydraulic fluid kg. Actual fluid displacement per 90 stroke equals 8.03 L Gas consumption per 90 stroke equals 1.4 standard m 3 Number of strokes of standard 66 cm 3 hand pump per 90 stroke equals /2 NPTF PORTS (shown plugged) ½ x 16 ROTARY VANE ACTUATOR Torque output Nm/bar Maximum working pressure 103 bar Maximum test pressure 190 bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid 483 kg. Actual fluid displacement per 90 stroke equals L Gas consumption per 90 stroke equals 2.58 standard m 3 stroke equals 76. 3
4 NOTE: Bolt circle, rotor bore, keyway quantity and size of mounting holes for RV-Series actuators will be custom fitted to specific valve. All dimensional data is subject to change. ALL DIMENSIONS SHOWN IN CENTIMETERS /2" NPTF PO RTS (show n plugged) ½ x 16 ROTARY VANE ACTUATOR Torque output 1, Nm/bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid kg. Actual fluid displacement per 90 stroke equals L Gas consumption per 90 stroke equals 3.6 standard m 3 stroke equals /4" NPTF PO RTS (shown plugged) /4" NPTF PO RTS (show n plugged) ¾ " NPTF PO RTS (shown plugged) x 16 ROTARY VANE ACTUATOR Torque output 1, Nm/bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid kg. Actual fluid displacement per 90 stroke equals L Gas consumption per 90 stroke equals 5.7 standard m 3 stroke equals x 16 ROTARY VANE ACTUATOR Torque output 3, Nm/bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid 1,324.5 kg. Actual fluid displacement per 90 stroke equals L Gas consumption per 90 stroke equals 9.1 standard m 3 stroke equals x 22 ROTARY VANE ACTUATOR Torque output 4, Nm/bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid 1,837 kg. Actual fluid displacement per 90 stroke equals L Gas consumption per 90 stroke equals 13.3 standard m 3 stroke equals 392.
5 NOTE: Bolt circle, rotor bore, keyway quantity and size of mounting holes for RV-Series actuators will be custom fitted to specific valve. All dimensional data is subject to change. ALL DIMENSIONS SHOWN IN CENTIMETERS ¾ " NPTF PO RTS (shown plugged) x 36 ROTARY VANE ACTUATOR Torque output 7, Nm/bar Maximum working pressure 68.9 bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid 3,486.8 kg. Actual fluid displacement per 90 stroke equals 126 L Gas consumption per 90 stroke equals 21.7 standard m 3 stroke equals ¼ " NPTF PO RTS (shown plugged) x 32 ROTARY VANE ACTUATOR Torque output 9, Nm/bar Maximum working pressure 68.9 bar Maximum test pressure bar Maximum acceptable valve stem cm. diameter Weight of actuator including hydraulic fluid 4,037 kg. Actual fluid displacement per 90 stroke equals 178 L Gas consumption per 90 stroke equals 29.7 standard m 3 stroke equals
6 SPEED OF OPERATION IN SECONDS PER 90 ROTATION* ACTUATOR SIZE OPERATING PRESSURE BAR ½ x ½ x 3 ½ ½ x ½ 3 ½ x x ½ x ½ x ½ x ½ x x x x x x * Stroking speeds above are approximate as speed may be affected by fluid viscosity or the flow capacities of the individual control components. The listed speeds are based on actuators with gas hydraulic tanks, hand pump and the standard poppet type control block in the power supply circuit. Adjustable speed control valves may be specified so that the stroking speed may be fine tuned to the field operating conditions. If faster speeds are required, please consult a factory representative. 6
7 APPROXIMATE WEIGHTS FOR SHAFER ROTARY OPERATORS, HYDRAULIC TANKS AND POWER STORAGE TANKS SIZE OPERATOR WEIGHT kg HYDRAULIC TANKS WEIGHT kg (PER PAIR) POWER STORAGE TANK (STANDARD) WEIGHT kg 6½ x ½ x 3½ ½ x x x ½ x ½ x ½ x ½ x x x x x x APPROXIMATE WEIGHTS FOR SHAFER HAND PUMPS, 2-WAY ELECTRIC CONTROLS, AND LIMIT SWITCHES PUMPS CONTROL (TWO-WAY ELECTRIC) LIMIT SWITCH 4 in. = 9 kg 1/4 in. = 27 kg LARGE = 12 kg 12 in. = 20 kg. 1/2 in. = 34 kg --- 4" Pump, 1/4 Poppet Block = 24 kg + Cover 13 kg = Total 37 kg 12" Pump, 1/4 Poppet Block= 46 kg + Cover 19 kg = Total 65 kg Linebreak Small Plate with Lockout = 19 kg + Cover 10 kg = 29 kg 4" Pump / D.H.V. = 23 kg 12" Pump / D.H.V. = 50 kg Limit Valve (ESD) with Plate 5 kg Terminal Box= 5 kg Terminal Box = 6 kg 1/4 Poppet Block, 4 cu. in. Pump & Linebreak with cover = 43 kg 7
8 NOTE: All dimensional data is for reference only and subject to change. Depending on the application, specific actuator controls may or may not be located inside of the control box. Where specified, there may be additional pressure vessels or power storage tanks which are not shown. GAS / HYDRAULIC ROTARY VANE - HORIZONTAL STEM, VERTICAL LINE SIZE A B C D E F G H J K L M 6 1/2 x /2 x 3 1/ /2 x x x /2 x /2 x /2 x /2 x x x x * * * * * * * * 26 x * * * * * * * * 33 x * * * * * * * * * Indicates this particuar size of actuator has not been used in this type of application. All dimensions shown in centimeters. H F/2 G /2 M A F G ACTUATO R CO NTRO L G AS/HYDRAULIC TANK ASSEM BLY D E J- DIAM ETER CLO SE L O PEN K B 8 C
9 NOTE: All dimensional data is for reference only and subject to change. Depending on the application, specific actuator controls may or may not be located inside of the control box. Where specified, there may be additional pressure vessels or power storage tanks which are not shown. GAS / HYDRAULIC ROTARY VANE - VERTICAL STEM, HORIZONTAL LINE SIZE A B C D E F G H J K 6 1/2 x /2 x 3 1/ /2 x x x /2 x /2 x /2 x /2 x x x x x x * Indicates this particuar size of actuator has not been used in this type of application. All dimensions shown in centimeters. 9
10 NOTE: All dimensional data is for reference only and subject to change. Depending on the application, specific actuator controls may or may not be located inside of the control box. Where specified, there may be additional pressure vessels or power storage tanks which are not shown. CENTRAL HYDRAULIC SYSTEM - HORIZONTAL STEM, VERTICAL LINE SIZE A B C D E F G H J K L M 6 1/2 x /2 x 3 1/ /2 x x x /2 x /2 x /2 x /2 x x x x * * * * * * * 26 x * * * * * * * 33 x * * * * * * * * Indicates this particuar size of actuator has not been used in this type of application. All dimensions shown in centimeters. F G M A K G /2 ACTUATO R CO NTRO L RESERVO IR TANK J -DIAM ETER E L B H CUSTO M ER CO NNECTIO N 10 C
11 NOTE: All dimensional data is for reference only and subject to change. Depending on the application, specific actuator controls may or may not be located inside of the control box. Where specified, there may be additional pressure vessels or power storage tanks which are not shown. CENTRAL HYDRAULIC SYSTEM - VERTICAL STEM, HORIZONTAL LINE SIZE A B C D E F G H J K L 6 1/2 x /2 x 3 1/ /2 x x x /2 x /2 x /2 x /2 x x x x x * * * * * * * * 33 x * * * * * * * * * Indicates this particuar size of actuator has not been used in this type of application. All dimensions shown in centimeters. G F K G /2 J -DIAM ETER CONTR OL RESERVO IR TANK D E ACTUATO R A L H CUSTO M ER CO NNECTIO N B C 11
12 2500 Park Ave. West, Mansfield, OH Phone (419) FAX (419) RV-ASDD-I
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 1 HYDRAULIC PUMPS The material needed for outcome 2 is very extensive so there
Hydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
High Torque Vane Motors MV015, MV037, MV057, MV125
High Torque Vane Motors MV015, MV037, MV057, MV125 2 Unique vane crossing vane design provides maximum versatility This motor is created around the patented vane crossing vane design, a leading-edge concept
*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
Pressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
KDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
Technical Information
Technical Information TI No. WL 80-46 E July 2001 Rolling Bearings FAG Hand Pump Sets The programme of FAG hand pump sets comprises the following basic designs: - PUMPE1000.0,7L (one-step pump) - PUMPE1000.4L
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW D660 Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Example. Fluid Power. Circuits
Example Fluid Power Circuits To Enhance Symbol Reading Skills To Work On Circuit Reading Skills With Answers HI LO Pump Circuit 18 A1 B1 17 16 15 13 Set 14 2,000 PSI PG2 Set 500 PSI 12 11 7 8 10 PG1 9
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409
Engineering Data Table of Contents Page No. I II Formulas, Conversions & Guidelines Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Sizing 408-409 Steam
A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
MANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
Torque and Rotation. Physics
Torque and Rotation Physics Torque Force is the action that creates changes in linear motion. For rotational motion, the same force can cause very different results. A torque is an action that causes objects
Pure Efficiency. C.C.I.A.A.: N REA. 0195268 Cod. Fiscale e P. IVA: 00483230173 Capitale Sociale versato 100.000,00
Pure Efficiency. The need to significantly reduce the production costs to remain competitive on the global market and the requirement to control and lessen the environmental impact of all activities are
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
ROTARY GEAR FLOW DIVIDERS
ROTARY GEAR FLOW DIVIDERS Concentric AB Innovation + Technology = Sustainability GC and D Series Rotary Gear Flow Dividers Intensifier - Combiner (European and U.S. Versions) Field-proven Concentric Hydraulic
MONO BLOCK DIRECTIONAL CONTROL VALVE TS1120TSLB
MONO BLOCK DIRECTIONAL CONTROL VALVE TS112TSLB TS TS212TSTSJB P T TS312TSDTSTKJ TS112TSJB FEATURES: O RG PORTS to eliminate leakage. POWER BEYOND CAPABILITY to fit your multi valve circuits. BUILT ANTI-DROP
Valve Remote Control Systems Centralized Hydraulics for marine vessels and offshore installations
Valve Remote Control Systems Centralized Hydraulics for marine vessels and offshore installations PLEIGER MASCHINENBAU _Hydraulic Actuators STK _Power Packs _Solenoid Valve Cabinet and Process Control
Flow divider (flow distributor), type TQ
Flow divider (flow distributor), type TQ Pressure p max = 0 bar Flow Q CN max = 00 lpm Share ratio = :. General Task Flow dividers type TQ are self-regulating valves, which largely irrespective of the
Line rupture protection valves type LB
Line rupture protection valves type LB Pressure p max Flow rate Q A max = 500 bar = 4... 160 lpm Screw-in versions Type LB...C In-line versions Type LB...G Type LB...F 1. General Line rupture protection
Open center control block in monoblock design MO-40
Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680
TorqPlus TM Electric Valve Actuators and Controls
TorqPlus TM Electric Valve Actuators and Controls Torque 150 IN/LB 600 IN/LB The Engineered Solution Bettis TorqPlus quality line of electric actuators are designed for quarter turn applications ball,
GoTo Europe Focused Delivery Program. Product Overview Hydraulics
GoTo Europe Focused Delivery Program Product Overview Hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times have become an important
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
Hydraulic multidisc Brake H420
S320gb - rev 02/09 S E R V I C E Hydraulic multidisc Brake H420 A N U A L WARNER ELECTRIC EUROPE Rue Champfleur, B.P. 20095, F- 49182 St Barthélemy d Anjou Cedex Tél. +33 (0)2 41 21 24 24, Fax + 33 (0)2
DIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual Declutchable Worm Gear
DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual Declutchable Worm Gear 2016 DECLUTCHABLE WORM GEAR INSTRUCTIONS This is an instructional manual which provides
100 cm 1 m. = 614 cm. 6.14 m. 2.54 cm. 1 m 1 in. 1 m. 2.54 cm 1ft. 1 in = 242 in. 614 cm. 242 in 1 ft. 1 in. 100 cm = 123 m
Units and Unit Conversions 6. Define the problem: If the nucleus were scaled to a diameter of 4 cm, determine the diameter of the atom. Develop a plan: Find the accepted relationship between the size of
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
Specifications 860-10000KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 201608-IV NINGBO
P2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
Fisher 377 Trip Valve
377 Trip Valve Product Bulletin Fisher 377 Trip Valve Fisher 377 pressure sensing trip valves are for control applications where a specific valve/actuator action is required when supply pressure falls
Extremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
ENERGY SAVING OF OIL HYDRAULIC PUMP UNIT BY IDLING STOP METHOD USING AN ACCUMULATOR
ENERGY SAVING OF OIL HYDRAULIC PUMP UNIT BY IDLING STOP METHOD USING AN ACCUMULATOR Katsumasa Suzuki 1, Yoshitaka Niimura 1, Kazutoshi Akitani 1 and Ken Sugimura 2 ABSTRACT In recent years, energy saving
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Quiz On Information Learned From Chapter 1
Quiz On Information Learned From Chapter 1 1. Most hydraulic circuits are designed by: A. mechanical engineers. B. fluid power engineers. C. fluid power distributor salesmen. 2. Atmospheric pressure at
1.Booklet. Hydraulic Motors. General Purpose MotorsR Series
.Booklet 1.Booklet Hydraulic Motors out 2 out 1.Booklet R Geroler Element... 11 Displacements... [15] ** 75 [20] * Speed... Up to 10 RPM Pressure Bar [PSI]... 125 [1800] Cont. 165 [2400] Inter. Torque
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
MONO BLOCK DIRECTIONAL CONTROL VALVE TS
SHIPPING: 2332 S 25TH STREET (ZIP 6815) MAILING: P.O. BOX #669 OMAHA, NE 6816 PHONE: (42) 344-4434 FAX: (42) 341-5419 HTTP://WWW.BRAND-HYD.COM MONO BLOCK DIRECTIONAL CONTROL VALVE TS TS312TSDTSTKJB TS2
THE SIMPLEX HAND PUMP
INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.
Hydraulic Troubleshooting PRESENTED BY
Hydraulic Troubleshooting PRESENTED BY NORMAN KRONOWITZ Introduction Welcome to the CMA/Flodyne/Hydradyne s Hydraulic Troubleshooting presentation. We will introduce many aspects of troubleshooting hydraulic
ZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
Hydraulic control unit series 0086-372-01
Technical Product Information No. 1290 EN Hydraulic control unit series 0086-372-01 Contents Page About this Technical Product Information (TPI) 2 The ORTLINGHAUS numbering system 2 About the product 3
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
Series PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US
Series PAVC Variable Displacement Piston Pumps zp1 Catalog HY28-2662-CD/US 1 Introduction Series PAVC Quick Reference Data Chart Pump Model Displacement CM 3 /REV (IN 3 /REV) Pump Delivery *Approx. Noise
POWER AND MOTION CONTROL FOR SUBSEA APPLICATIONS
POWER AND MOTION CONTROL FOR SUBSEA APPLICATIONS - HYDRAULICS - PNEUMATICS - ELECTROMECHANICS - SLIDING BEARINGS WWW.SERVI.NO LEADING SUPPLIER OF POWER AND MOTION CONTROL WITH A CENTURY OF EXPERIENCE -
Valv-Powr Series VPVL Stainless Steel Model D Double-Acting and Spring-Return Rack-and-Pinion Compact Pneumatic Actuators
Valv-Powr Series VPVL Stainless Steel Model D Double-Acting and Spring-Return Rack-and-Pinion Compact Pneumatic Actuators Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
Vickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
Model 1210C Battery Powered Pump Shown. Description
12 Volt DC Rotary Vane Pump Series 1200C Model 1210C Battery Powered Pump Shown Description of Included Models Model Number FR1205C FR1210C FR1211C FR2410C FR2411C Description Basic 12 volt DC pump with
Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
![Taps up to M20 [3/4] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance](/thumbs/39/20152487.jpg "Taps up to M20 [3/4] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance")
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
MP8000 Series Pneumatic Valve Actuators
14-1161- 9, Rev. A Technical Bulletin MP8000 Issue Date March 2016 MP8000 Series Pneumatic Valve Actuators Pre-Assembly Details Page 3 MP8000 Actuator Components 3 Tools Required to Assemble an MP8000
ZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM
Introduction Manapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05 and D08 sandwich style valve. The NFPA D03 valve body conforms
ZF 25. Marine Propulsion Systems
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Description Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. Suitable for high performance
Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
Operation Manual For NDJ-8S Digital Rotary Viscometer
Operation Manual For NDJ-8S Digital Rotary Viscometer 1 Contents 1. General... 2 2. Main technical data... 2 3. Working principle... 2 4. Installation... 3 5. Operation procedures... 4 6. Precautions...
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
GoTo Europe Focused Delivery Program. Product overview industrial and mobile hydraulics
GoTo Europe Focused Delivery Program Product overview industrial and mobile hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
Specifications for Volkswagen Industrial Engine
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
Dual Path Mobile Pump
Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial
I nstallation. M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications. Tools Needed.
FANs 268.1, 1628.3 Installation Bulletin M100Q Issue Date 1099 M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications I nstallation Parts Included M110QGA-1 and
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................
cost-effective automation
cost-effective automation compact units for drilling tapping milling www.esystems.com AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP) AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists