Magnetic Position Sensors
|
|
|
- Emory Stanley
- 7 years ago
- Views:
Transcription
1 Magnetic Position Sensors
2 Light Sensors (TAOS) Mobile Entertainment Audio Piezo Motor Drivers Data Converters RF Products Interfaces Power Converters Magnetic Position Sensors Power Management Lighting Management
3 Hall-based Magnetic Position Sensors ams offers the broadest range of high performance Magnetic Position Sensors suitable for Industrial, Medical, Robotics, Automotive and Consumer applications. ams patented technology makes all Magnetic Position Sensors immune to external stray field yielding to higher robustness and lower system cost (no magnetic shield needed). Magnetic Rotary Position Sensors The Magnetic Rotary Position Sensor product family detects the absolute angular orientation of an on-axis 2-pole magnet rotating over the center of the IC. The absolute angular position can be displayed on different s as, ABI, UVW or directly read through the interface. According to the application s requirements different resolutions from 8-bit up to 14-bit are available. This technology can be employed in high accuracy angle position detection, high speed rotation systems and motor control (BLDC motors). All Rotary Magnetic Position Sensors can replace both absolute and incremental optical sensors, other magnetic and inductive technologies, potentiometers and magnetic switches. Magnetic Linear Incremental Position Sensors The Linear Incremental Magnetic Position Sensor product family detects the linear movement of a multi-pole magnetic strip. Circular multi-pole magnetic rings can also be used in rotary incremental rotation off-axis application. This high precision product family allows to detect linear movement with a resolution as good as 0.5µm. Linear Incremental Magnetic Position Sensors can be used in a variety of motion sensing applications found in medical, industrial and consumer products. 3D Absolute Position Sensors The new 3D Absolute Position Sensor product family is capable to detect absolute linear position of a 2-pole magnet as well as absolute angular orientation in on- and off-axis systems. High level of flexibility and precision can be achieved through the linearization in the specific application. The superior stroke and input magnetic field make these ICs suitable for countless applications in the Industrial and Automotive markets. EasyPoint (Joystick Position Sensor) EasyPoint is a mini-joystick which consists of a mechanical stack incorporating a navigation knob with a magnet and a twodimensional Magnetic Position Sensor Hall IC. Its simple construction and the contactless sensing technique implemented by the 2-D Magnetic Position Sensor means that the module offers very high mechanical reliability. With EasyPoint module technology, ams is providing a highly reliable mini-joystick module for use in a variety of portable devices. Besides its high reliability, this solution also offers a high degree of usability. Read more about EasyPoint on our blog site blog.easypoint.com
4 Magnetic Position Sensors Magnetic Rotary Position Sensors Part No. Description Resolution Interfaces Output Max Speed Overvoltage AS5030 AS5035 AS5040 AS5043 AS5045 AS5048A AS5048B AS5050 AS5055 AS5115 AS5215 AS5130 AS5132 AS5134 AS5140H AS5145A/B AS5245 AS5145H AS bit Rotary Position Sensor with 8-bit Rotary Position Sensor with ABI 10-bit Rotary Position Sensor with, ABI, UVW 10-bit Rotary Position Sensor with and Linear analog with 14-bit Rotary Position Sensor with Digital 14-bit Rotary Position Sensor with Digital and 10-bit Rotary Position Sensor with with Rotary Position Sensor with Sin/Cos signal Redundant Rotary Position Sensor with Sin/Cos 8-bit Rotary Position Sensor with 8.5-bit Rotary Position Sensor with, ABI, UVW (up to 6 Pole Pairs) 8.5-bit Rotary Position Sensor with, ABI, UVW (up to 6 Pole pairs) 10-bit Rotary Position Sensor with Output, ABI with, and ABI Redundandt Rotary Position Sensor with Digital Angle and ABI with with Linear analog or and Overvoltage 8-bit Redundant rpm V C Qualified to +125 TSSOP-16-8-bit - ABI or to +125 SSOP bit 10-bit 14-bit 14-bit 10-bit SPI I 2 C SPI SPI ABI / UVW / Linear analog or to +125 SSOP or to +125 SSOP or to +125 SSOP or to +150 TSSOP or to +150 TSSOP to +85 QFN to +85 QFN sin/cos to +150 SSOP-16 - sin/cos to +150 MLF-32 8-bit 8.5-bit 8.5-bit 10-bit - / ABI / UVW (up to 6 Pole Pairs) / / ABI / UVW (up to 6 Pole Pairs) / ABI / ABI / ABI / Linear analog / to +125 SSOP to +150 SSOP to +140 SSOP or to +150 SSOP or to +150 SSOP or to +150 QFN or to +150 SSOP to +150 TSSOP-14
5 Magnetic Rotary Position Sensors Part No. Description Resolution Interfaces Output Max Speed Overvoltage Redundant Qualified rpm V C AS5263 Redundant Rotary Position Sensor with Linear analog or and Overvoltage - Linear analog / to +150 MLF-32 AS5162 with Linear analog and overvoltage protection - Linear analog to +150 SOIC-8 AS5262 Redundant Rotary Position Sensor with Linear analog and overvoltage protection - Linear analog to +150 MLF-16 AS5161 with and overvoltage protection to +150 SOIC-8 AS5261 Redundant Rotary Position Sensor with and overvoltage protection to +150 MLF-16 Magnetic Linear Incremental Position Sensors Part No. Description Resolution AS5304A/B AS5306A/B AS5311 NSE-5310 AS step Linear Incremental Position Sensor with ABI 160-step Linear Incremental Position Sensor with ABI Linear Incremental Position Sensor with Digital Interface and Linear Incremental Position Sensor with Digital Interface and 10-bit Linear Absolute Field Sensor with Digital position Minium Pole Pair Length Interfaces Output Max Speed Overvoltage Redundant rpm V C 160 step 4 mm - ABI 20 m/s to +125 TSSOP step 2.4 mm - ABI 12 m/s to +125 TSSOP-20-2 mm 0.65 m/s or to +125 TSSOP-20-2 mm I 2 C 0.65 m/s or to +125 TSSOP bit - I 2 C Digital position qualified to +85 WL-CSP -
6 Magnetic Position Sensors 3D Absolute Position Sensors Part No. Description Resolution Interfaces Output Redundant AS bit Linear Absolute Position Sensor with Digital and V C 14-bit SPI, Digital to +105 TSSOP-16 - Qualified EasyPoint Joystick Position Sensor Part No. Description Resolution Interfaces Output AS5013 Two-dimensional Magnetic Position Sensor with Digital Coordinates 8-bit (X and Y) I 2 C Digital Coordinates (interface) Overvoltage Redundant V C Qualified to +80 QFN-16 - AEC-Q100 Automotive Qualification The "Safe Launch Program" makes ams a competent partner for autmotive qualified products. It is part of ams "Zero-Defect-Strategy" and includes next to the AEC-Q100 automotive qualification essential additional customer s requirements, as well as a "Burn-In" and a "Three-" testing procedure. Burn-In stands for an artificial, accelerated aging process. The three-temperature test gives us further information about the reliability at lowest, highest and at room temperature regarding to the temperature specification limits of respective devices. Together with improved and extended screening procedures, this program will be done for the first, minimum 100,000 parts during the ramp-up phase of an automotive project to guarantee "zero defects" and consequently the best quality for automotive customers.
7 ams Headquarters Tobelbader Strasse Unterpremstaetten, Austria Phone: Web: dc = design center tc = test center so = United Kingdom Stockport so Switzerland Rapperswil so/dc Germany Munich so Sweden Sollentuna so Finland Helsinki so China Hong Kong so Shenzhen so Shanghai so Korea Seoul so Japan Tokyo so USA Cupertino, CA so Austin, TX dc Plano, TX so, dc Raleigh, NC so Spain Valencia dc France Vincennes so Italy Pavia dc Corsico so Pisa dc India Hyderabad dc Singapore so Taiwan Taipei so Philippines Calamba tc Get free samples and buy our products online at: /ICdirect
8 Europe (Headquarters) ams AG Tobelbader Strasse Unterpremstaetten, Austria Phone: Asia/Pacific ams Tomson Commercial Building, Suite 1006 No 710 Dongfang Rd Pudong, Shanghai, China, Phone: Americas AMS-TAOS USA Inc Klein Road, Suite 300 Plano, TX 75074, USA Phone:
Accuracy counts! SENSORS WITH ANALOG OUTPUT
Accuracy counts! SENSORS WITH ANALOG OUTPUT OTHER APPLICATIONS: KEY ADVANTAGES: Distance measurement Positioning Profile detection Deformation monitoring Vibration monitoring Process monitoring Detection
AN2680 Application note
Application note Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU Introduction This application note describes the method of defining the system for regulating
NEW LMS 400. The LMS 400 Laser Measurement System Pole position for robotics and material handling. Product Information
NEW LMS 400 Product Information The LMS 400 Laser Measurement System Pole position for robotics and material handling. LMS 400 Moving faster with more precision and reliability The LMS 400 Laser Measurement
Single LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Description
Single LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Data brief Low-drop post regulator and high-efficiency step-up PWM with integrated power N-MOS allowing
Agilent Automotive Power Window Regulator Testing. Application Note
Agilent Automotive Power Window Regulator Testing Application Note Abstract Automotive power window regulator tests require the use of accurate data acquisition devices, as they cover a wide range of parameters
LDDM Linear Direct Drive Motors. ULIM Series
DDM inear Direct Drive Motors UIM Series 1 The Perfect Drive for Every Application. INA - Drives & Mechatronics GmbH & Co. ohg, a company of the Schaeffler Group, specializes in linear and rotary direct
Foreign Taxes Paid and Foreign Source Income INTECH Global Income Managed Volatility Fund
Income INTECH Global Income Managed Volatility Fund Australia 0.0066 0.0375 Austria 0.0045 0.0014 Belgium 0.0461 0.0138 Bermuda 0.0000 0.0059 Canada 0.0919 0.0275 Cayman Islands 0.0000 0.0044 China 0.0000
Microsoft Voucher Ordering Processes
Microsoft Voucher Ordering Processes *For purposes of this document, the term Member applies to all Microsoft Members, Academic, ITA and Learning partners. Pearson VUE Voucher Store The Pearson VUE Voucher
AN820 APPLICATION NOTE INPUT/OUTPUT PROTECTION FOR AUTOMOTIVE COMPUTER
AN820 APPLICATION NOTE INPUT/OUTPUT PROTECTION FOR AUTOMOTIE COMPUTER INTRODUCTION In cars, the number of functions carried out by electronic components has greatly increased during the last 10 years.
Investor presentation First Half-Year 2014
Investor presentation First Half-Year 2014 Conference Call July 22, 2014 The following documentation contains forward-looking statements that are subject to certain risks and uncertainties. Actual results
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet Description The AEDB-9140 series are three channel optical incremental encoder modules
.OPERATING SUPPLY VOLTAGE UP TO 46 V
L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
Applications SS 11 VL- R 03 550
AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
BD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor
Low voltage PNP power transistor Features Low saturation voltage PNP transistor Applications Audio, power linear and switching applications Description The device is manufactured in planar technology with
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V
Seoul Semiconductor Europe
Roma, 01/12/2011 Seoul Semiconductor Europe Carlo Romiti General Manager Italy Presence of SSC Outlets Factories Subsidiary (SOC) Seoul Semiconductor Europe Denmark UK Munich Poland Nurnberg France Milan
Agilent 4338B Milliohm Meter
Agilent 4338B Milliohm Meter 10 µω to 100 kω Technical Overview Introduction Ideal for precise measurements of extremely low resistances using an ac test signal, the Agilent Technologies 4338B suits bench-top
AN4156 Application note
Application note Hardware abstraction layer for Android Introduction This application note provides guidelines for successfully integrating STMicroelectronics sensors (accelerometer, magnetometer, gyroscope
Make the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION
Make the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION photoelectric sensors Thanks to its vision for innovation and technological enhancement, Contrinex keeps on setting new standards
Solar Inverters. Ferrites in Renewable Energies: Solar Inverters. customer requirements. Support and flexibility to design custom product to fulfill
Support and flexibility to design custom product to fulfill customer requirements Optimum ferrite material selection for magnetic applications in the design for cost saving, and performance improvement
Agilent OSS access7 Signaling Meter
Agilent OSS access7 Signaling Meter access7 Signaling Meter - extracting the maximum revenue potential from your network Agilent access7 Signaling Meter helps you to measure SS7 traffic volumes and network
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. 2N3055, MJ2955 Complementary power transistors Features Datasheet - production
STW20NM50 N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET
N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET TYPE V DSS (@Tjmax) R DS(on) I D STW20NM50 550V < 0.25Ω 20 A TYPICAL R DS (on) = 0.20Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED
Symbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V
BUZ71A N - CHANNEL 50V - 0.1Ω - 13A TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ71A 50 V < 0.12 Ω 13 A TYPICAL RDS(on) = 0.1 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT
ADJUSTABLE VOLTAGE AND CURRENT REGULATOR
L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)
Series: IDAM Servo Drive E Digital Motor Drive - DMD-078.12
Series: IDAM Servo Drive E Digital Motor Drive - DMD-078.12 inside Integrated amplifiers for 8 single-phase motors, 4 two-phases motors or 4 three-phases motors or combinations of them in one device Position
Cisco 2-Port OC-3/STM-1 Packet-over-SONET Port Adapter
Data Sheet Cisco 2-Port OC-3/STM-1 Packet-over-SONET Port Adapter To meet the continual need for increased router features and performance, Cisco Systems introduces its newest packetover-sonet (POS) port
Sense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS. OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY
L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY. HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE
STGW40NC60V N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT
N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT Table 1: General Features STGW40NC60V 600 V < 2.5 V 50 A HIGH CURRENT CAPABILITY HIGH FREQUENCY OPERATION UP TO 50 KHz LOSSES INCLUDE DIODE RECOVERY
L4940 series VERY LOW DROP 1.5 A REGULATORS
L4940 series VERY LOW DROP 1.5 A REGULATORS PRECISE 5 V, 8.5 V, 10 V, 12 V OUTPUTS LOW DROPOUT VOLTAGE (500 typ at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY
APPLICATION NOTE How to Deal with Electrical Noise and Interference in the Measuring Chain using a NEXUS
APPLICATION NOTE How to Deal with Electrical Noise and Interference in the Measuring Chain using a NEXUS Conditioning Amplifier by Claus Lindahl and Bernard Ginn, Brüel&Kjær When making vibration measurements,
Speed sensor MiniCoder GEL 247
Speed sensor MiniCoder GEL 47 Flange assembly Technical information version 08.0 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless measurement of rotational movements
The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers.
Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x Features Two Channel Quadrature Output with Optional Index Pulse Quick and Easy Assembly
ST19NP18-TPM-I2C. Trusted Platform Module (TPM) with I²C Interface. Features
Trusted Platform Module (TPM) with I²C Interface Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware I²C communication interface (Slave mode) Architecture based on ST19N
STW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET
N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY
TekConnect Adapters. TCA75 TCA-BNC TCA-SMA TCA-N TCA-292MM Data Sheet. Applications. Features & Benefits
TekConnect Adapters TCA75 TCA-BNC TCA-SMA TCA-N TCA-292MM Data Sheet TCA-N TekConnect-to-N DC to 11 GHz (Instrument Dependent) 50 Ω Input (Only) TCA-SMA TekConnect-to-SMA DC to 18 GHz (Instrument Dependent)
3-Phase BLDC Motor Control with Hall Sensors Using 56800/E Digital Signal Controllers
Freescale Semiconductor Application Note AN1916 Rev. 2.0, 11/2005 3-Phase BLDC Motor Control with Hall Sensors Using 56800/E Digital Signal Controllers Leonard N. Elevich Contents 1. Application Benefits...1
Agilent Mobile WiMAX R&D Test Set Solutions: Software and Technical Support Contract
Agilent Mobile WiMAX R&D Test Set Solutions: Software and Technical Support Contract Product Overview Maximize the potential of the E6651A Mobile WiMAX test set and related software with the latest software
1.5 GHz Active Probe TAP1500 Datasheet
1.5 GHz Active Probe TAP1500 Datasheet Easy to use Connects directly to oscilloscopes with the TekVPI probe interface Provides automatic units scaling and readout on the oscilloscope display Easy access
ULN2001, ULN2002 ULN2003, ULN2004
ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington array Datasheet production data Features Seven Darlingtons per package Output current 500 ma per driver (600 ma peak) Output voltage 50 V Integrated suppression
CONTROL LOADING SOLUTIONS
CONTROL LOADING SOLUTIONS A FULL RANGE OF CONTROL LOADING SOLUTIONS FOR FIXED AND ROTARY WING Rev 2, 0709 WHAT MOVES YOUR WORLD TAKE YOUR CONTROL LOADING SYSTEMS TO NEW HEIGHTS With a few decades of experience
Bourns Rotary Encoders. Short Form Brochure Revision 2
Bourns Rotary Encoders Short Form Brochure Revision 2 Introduction Bourns Sensors and Controls Division has continued to expand its encoder product offering with a wide variety of models to support our
Applications SS 26 V- R 05 1170
AC Line Filters SS Coils, SS2V Type Overview The KEMET SS Coils, SS2V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
Time-Correlated Multi-domain RF Analysis with the MSO70000 Series Oscilloscope and SignalVu Software
Time-Correlated Multi-domain RF Analysis with the MSO70000 Series Oscilloscope and SignalVu Software Technical Brief Introduction The MSO70000 Series Mixed Oscilloscope, when coupled with SignalVu Spectrum
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
AE HIGH VOLTAGE PRODUCTS MISSION-CRITICAL HIGH VOLTAGE SYSTEM SOLUTIONS FOR EXACTING APPLICATION REQUIREMENTS
AE HIGH VOLTAGE PRODUCTS MISSION-CRITICAL HIGH VOLTAGE SYSTEM SOLUTIONS FOR EXACTING APPLICATION REQUIREMENTS HIGH VOLTAGE SYSTEM SOLUTIONS FOR A RANGE OF END-USER AND OEM APPLICATIONS Page 2 Merging more
BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
ULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
Global Economic Briefing: Global Inflation
Global Economic Briefing: Global Inflation August 7, Dr. Edward Yardeni -97-7 eyardeni@ Debbie Johnson -- djohnson@ Mali Quintana -- aquintana@ Please visit our sites at www. blog. thinking outside the
TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS
CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions
ST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS
5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): ± 9V TRANSITION SLEW RATE (TYP.): 12V/µs
Agilent 4339B/4349B High Resistance Meters
Agilent 4339B/4349B High Resistance Meters Technical Overview Within Budget Without Compromise Introducing the Agilent Technologies 4339B and 4349B High Resistance Meters Used for Making Ultra- High Resistance
APPLICATION NOTE. Atmel AVR443: Sensor-based Control of Three Phase Brushless DC Motor. Atmel AVR 8-bit Microcontrollers. Features.
APPLICATION NOTE Features Atmel AVR443: Sensor-based Control of Three Phase Brushless DC Motor Less than 5µs response time on Hall sensor output change Theoretical maximum of 1600k RPM Over-current sensing
The Role of Banks in Global Mergers and Acquisitions by James R. Barth, Triphon Phumiwasana, and Keven Yost *
The Role of Banks in Global Mergers and Acquisitions by James R. Barth, Triphon Phumiwasana, and Keven Yost * There has been substantial consolidation among firms in many industries in countries around
AT-S39 Version 1.3 Management Software for the AT-8024 and AT-8024GB Fast Ethernet Switches. Software Release Notes
AT-S39 Version 1.3 Management Software for the AT-8024 and AT-8024GB Fast Ethernet Switches Supported Platforms Software Release Notes Please read this document before you begin to use the AT-S39 management
SINAMICS S120. Encoder system connection M 3 ~ Encoder system connection. 2/178 Siemens D 21.1 2006
SINAMICS S10 Motors with DRIVE-CLiQ interface for motors with DRIVE-CLiQ interface Max. current requirement at 4 V DC (via Motor Module and DRIVE-CLiQ cable) Max. DRIVE-CLiQ cable length Motors with DRIVE-CLiQ
Product Overview 2Pro AC Devices Provide Overcurrent/ Overvoltage/Overtemperature Protection for AC Industrial and Appliance Applications
Product Overview Provide Overcurrent/ Overvoltage/Overtemperature Protection for AC Industrial and Appliance Applications The 2Pro AC family of devices provide integrated overcurrent/overvoltage/ overtemperature
HCF4081B QUAD 2 INPUT AND GATE
QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25
AN438 APPLICATION NOTE SAFETY PRECAUTIONS FOR DEVELOPMENT TOOL TRIAC + MICROCONTROLLER
AN438 APPLICATION NOTE SAFETY PRECAUTIONS FOR DEVELOPMENT TOOL TRIAC + MICROCONTROLLER INTRODUCTION The goal of this paper is to analyse the different ways to configure a micro-controller and a development
Regional Strategies 82/90
Regional Strategies 82/90 Global Operations NTT Com Group has subsidiaries and offices in 85 cities in 30 countries/regions except Japan, which connect networks to more than 150 countries around the world.
WORLD ROBOTICS 2006 EXECUTIVE SUMMARY
2005 World Robot Market Total world-wide sales: 126,700 units, up 30% on 2004 EXECUTIVE SUMMARY World total stock of operational industrial robots: 923,000 units, 9% greater than 2004 World market surged
BUX48/48A BUV48A/V48AFI
BUX48/48A BU48A/48AFI HIGH POWER NPN SILICON TRANSISTORS STMicroelectronics PREFERRED SALESTYPES NPN TRANSISTOR HIGH OLTAGE CAPABILITY HIGH CURRENT CAPABILITY FAST SWITCHING SPEED APPLICATIONS SWITCH MODE
Bosch Rexroth The Drive and Control Company. Telehandlers Mobile concrete mixers Cranes Drilling equipment Surface repair machinery Pavers
CASE STUDY Bosch Rexroth AG Hydraulics for the Automotive Industry Sound and Vibration R&D Germany Automotive PULSE, customised software, transducers Bosch Rexroth AG is a 100% subsidiary of Robert Bosch
STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET
N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STP62NS04Z CLAMPED
AN3998 Application note
Application note PDM audio software decoding on STM32 microcontrollers 1 Introduction This application note presents the algorithms and architecture of an optimized software implementation for PDM signal
AN974 APPLICATION NOTE
AN974 APPLICATION NOTE Real time clock with ST7 Timer Output Compare By MCD Application Team 1 INTRODUCTION The purpose of this note is to present how to use the ST7 Timer output compare function. As an
E190Q Lecture 5 Autonomous Robot Navigation
E190Q Lecture 5 Autonomous Robot Navigation Instructor: Chris Clark Semester: Spring 2014 1 Figures courtesy of Siegwart & Nourbakhsh Control Structures Planning Based Control Prior Knowledge Operator
SWITCH-MODE POWER SUPPLY CONTROLLER PULSE OUTPUT DC OUTPUT GROUND EXTERNAL FUNCTION SIMULATION ZERO CROSSING INPUT CONTROL EXTERNAL FUNCTION
SWITCH-MODE POWER SUPPLY CONTROLLER. LOW START-UP CURRENT. DIRECT CONTROL OF SWITCHING TRAN- SISTOR. COLLECTOR CURRENT PROPORTIONAL TO BASE-CURRENT INPUT REERSE-GOING LINEAR OERLOAD CHARACTERISTIC CURE
How To Get A New Phone System For Your Business
Cisco Phone Systems Telemarketing Script Cold Call 1. Locate Contact: Name listed Owner General Manager / Office Manager Chief BDM (Business Decision Maker) Note: Avoid talking to IT since this is not
HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION
BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAY. EQUIVALENT AC OUTPUT DRIVE
VNP5N07 "OMNIFET": FULLY AUTOPROTECTED POWER MOSFET
"OMNIFET": FULLY AUTOPROTECTED POWER MOSFET TYPE Vclamp RDS(on) Ilim VNP5N07 70 V 0.2 Ω 5 A LINEAR CURRENT LIMITATION THERMAL SHUT DOWN SHORT CIRCUIT PROTECTION INTEGRATED CLAMP LOW CURRENT DRAWN FROM
AN2604 Application note
AN2604 Application note STM32F101xx and STM32F103xx RTC calibration Introduction The real-time clock (RTC) precision is a requirement in most embedded applications, but due to external environment temperature
TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION
TDA2822 DUAL POER AMPLIFIER SUPPLY VOLTAGE DON TO 3 V. LO CROSSOVER DISTORSION LO QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION DESCRIPTION The TDA2822 is a monolithic integrated circuit in 12+2+2 powerdip,
AN ISOLATED GATE DRIVE FOR POWER MOSFETs AND IGBTs
APPLICATION NOTE AN ISOLATED GATE DRIVE FOR POWER MOSFETs AND IGBTs by J.M. Bourgeois ABSTRACT Power MOSFET and IGBT gate drives often face isolation and high voltage constraints. The gate drive described
Agilent 87421A/87422A Power Supply
Agilent 87421A/87422A Power Supply Technical Overview Designed specifically for Agilent Technologies microwave system amplifiers Bias cable permits remote placement Compact size for easy system integration
Image Lab Software for the GS-900 Densitometer
Image Lab Software for the GS-900 Densitometer Quick Start Guide Catalog # 170-9690 Bio-Rad Technical Support For help and technical advice, please contact the Bio-Rad Technical Support department. In
Symbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive
BUZ11 N - CHANNEL 50V - 0.03Ω - 30A -TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ11 50 V < 0.04 Ω 30 A TYPICAL R DS(on) = 0.03 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT
STP6N60FI N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR
N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR TYPE VDSS RDS(on) ID STP6N60FI 600 V < 1.2 Ω 3.8 A TYPICAL R DS(on) =1Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT
MANDATORY PROVIDENT FUND SCHEMES AUTHORITY
Guidelines III.4 MANDATORY PROVIDENT FUND SCHEMES AUTHORITY III.4 Guidelines on Approved Exchanges INTRODUCTION Section 2 of the Mandatory Provident Fund Schemes (General) Regulation ( the Regulation )
MILE Encoder for EC 90 flat
MILE Encoders Edition October 2014 MILE Encoder for EC 90 flat Encoders Document ID: 1 495 818-06 ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com
Performance 2016: Global Stock Markets
Performance 216: Global Stock Markets July 22, 216 Dr. Edward Yardeni 16-972-7683 eyardeni@ Mali Quintana 48-664-1333 aquintana@ Please visit our sites at www. blog. thinking outside the box Table Of Contents
Agilent P940xA/C Solid State PIN Diode Switches
Agilent P940xA/C Solid State PIN Diode Switches Operating and Service Manual Agilent Technologies Notices Agilent Technologies, Inc. 2007 No part of this manual may be reproduced in any form or by any
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
AN3110 Application note
Application note Using the STVM100 to automatically adjust VCOM voltage in e-paper Introduction The widespread use of multimedia electronic devices, coupled with environmental concerns over the manufacturing
Sensors for plastic manufacturing Solutions in partnership from a single source
Sensors for plastic manufacturing Solutions in partnership from a single source Material supply Continuous granule supply Detection and positioning of semi-finished goods Processing Clamping force monitoring
BRIEF INFORMATION Angular Position Sensors Single and double sensors
BRIEF INFORMATION Angular Position Sensors Single and double sensors Single or redundant sensors High precision due to internal 14 bit resolution High thermal stability and linearity High insensitivity
HCF4010B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT
High-voltage Differential Probes TMDP0200 - THDP0200 - THDP0100 - P5200A - P5202A - P5205A - P5210A
High-voltage Differential Probes TMDP0200 - THDP0200 - THDP0100 - P5200A - P5202A - P5205A - P5210A BNC interface (P5200A probes) TekVPI interface (TMDP and THDP Series probes) TekProbe interface (P5202A,
Electro Mechanical Actuators for Aerospace applications. www.sener-group.com
Electro Mechanical Actuators for Aerospace applications www.sener-group.com 2 Electro mechanical Actuators for Aerospace applications www.sener-group.com About SENER In 1956 was founded the SENER Group,
L297 STEPPER MOTOR CONTROLLERS
L297 STEPPER MOTOR CONTROLLERS NORMAL/WAVE DRIVE HALF/FULL STEP MODES CLOCKWISE/ANTICLOCKWISE DIRECTION SWITCHMODE LOAD CURRENT REGULA- TION PROGRAMMABLE LOAD CURRENT FEW EXTERNAL COMPONENTS RESET INPUT
TDA7448 6 CHANNEL VOLUME CONTROLLER 1 FEATURES 2 DESCRIPTION. Figure 1. Package
6 CHANNEL CONTROLLER FEATURES 6 CHANNEL INPUTS 6 CHANNEL OUTPUTS ATTENUATION RANGE OF 0 TO -79dB CONTROL IN.0dB STEPS 6 CHANNEL INDEPENDENT CONTROL ALL FUNCTION ARE PROGRAMMABLE VIA SERIAL BUS DESCRIPTION
Position measurement & control
Position measurement & control General catalogue Position measurement & control Lika Electronic has successfully developed solutions for the automation industry since 1982, becoming a leading manufacturer
TOPOLOGIES FOR SWITCHED MODE POWER SUPPLIES
TOPOLOGIES FOR SWITCHED MODE POWER SUPPLIES by L. Wuidart I INTRODUCTION This paper presents an overview of the most important DC-DC converter topologies. The main object is to guide the designer in selecting
Gas Turbine Fuel Control Valve
Gas Turbine Fuel Control Valve Model 8402 Overview The 8402G Fuel Valve System is a balanced rotary valve with an electric stepper-motor actuator. This high performance gas turbine fuel control valve with
Application Information Fully Integrated Hall Effect Motor Driver for Brushless DC Vibration Motor Applications
Application Information Fully Integrated Hall Effect Motor Driver for Brushless DC Vibration Motor Applications By Shaun Milano Vibration motors are used in a variety of applications including mobile phone
by knürr CoolTherm Server cabinet technology with outstanding benefits up to 35kW cooling capacity Blade-Server server optimized! www.knuerr.
HIGH DENSITY COOLING SOLUTIONS by knürr CoolTherm Server cabinet technology with outstanding benefits up to 35kW cooling capacity Blade-Server server optimized! optimiert! Setting benchmarks. Being the
MERCER S COMPENSATION ANALYSIS AND REVIEW SYSTEM AN ONLINE TOOL DESIGNED TO TAKE THE WORK OUT OF YOUR COMPENSATION REVIEW PROCESS
MERCER S COMPENSATION ANALYSIS AND REVIEW SYSTEM AN ONLINE TOOL DESIGNED TO TAKE THE WORK OUT OF YOUR COMPENSATION REVIEW PROCESS MERCER S COMPENSATION ANALYSIS AND REVIEW SYSTEM www.imercer.com/cars Mercer
Basler beat AREA SCAN CAMERAS. High-resolution 12 MP cameras with global shutter
Basler beat AREA SCAN CAMERAS High-resolution 12 MP cameras with global shutter Outstanding price / performance ratio High speed through Camera Link interface Flexible and easy integration Overview Convincing
How To Control Gimbal
Tarot 2-Axis Brushless Gimbal for Gopro User Manual V1.0 1. Introduction Tarot T-2D gimbal is designed for the Gopro Hero3, which is widely used in film, television productions, advertising aerial photography,