Transcription

1 Distributed by: The content and copyrights of the attached material are the property of its owner.

2 Features/Benefits Anti-static switch exceeds 0 KV DC static resistance Momentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers Computers C&K Y Series, 5 & 6 Tumbler s Models Available Specifications CONTACT RATING: Q contact material: 15 V AC or 8 V DC; 50 V AC (U/CSA). See page -9 for additional ratings. EECTRICA IFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. - V DC, 100 ma, for both silver and gold plated contacts. INSUATION RESISTANCE: 10 9 Ω min. DIEECTRIC STRENGTH: 1,000 Vrms sea level. INDEXING: 5º or 90º, - positions (&5 tumbler switchlocks). 5º, positions; or 90º, positions (6 tumbler tubular switchlocks). Other functions available, consult Customer Service Center. STATIC RESISTANCE: Anti-static models exceed 0 KV DC static sea level, lock body to terminals. MOUNTING TORQUE: 10 in./lbs.; 1 in./lbs max. Patent No.,69,56 Materials OCK: Zinc alloy with stainless steel facing, std. ( & 5 tumbler lock and 6 tumbler tubular lock). KEYS: Two nickel plated brass keys, with code number, std. ( tumbler lock). Two die cast chrome plated zinc alloy keys, std. (6 tumbler lock). SWITCH HOUSING: Glass filled polyester (U 9V-0). CONTACTS AND TERMINAS: Q contact material: Copper, silver plated. See page -9 for additional contact materials. MOUNTING NUT: Zinc alloy or steel, nickel or bright zinc plated. MOUNTING CIP: Steel, nickel or bright zinc plated. DRESS NUT: Brass, nickel plated. TERMINA SEA: Epoxy. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages - thru -9. For additional options not shown in catalog, consult Customer Service Center. Switch and ock Function Y1001 (STD.), 5, keypull pos. 1 Y1011U (STD.), 90, keypull pos. 1 & Y1001U, 0, keypull pos. 1 & Y001U, 0, keypull pos. 1 & Y1008, 0, keypull pos. 1 Y008, 0, keypull pos. 1 Y100AA, 0, keypull pos. 1, & Y00AA, 0, keypull pos. 1, & Y100AB, 0, keypull pos. 1,, & Y00AB, 0, keypull pos. 1,, & Y1011, 90, keypull pos. 1 Y011, 90, keypull pos. 1 Y1011C, 90, keypull pos. Y011C, 90, keypull pos. Y011U, 90, keypull pos. 1 & Y117, 90, keypull pos. 1 Y117U, 90, keypull pos. 1, & Y1081, 0, mom., keypull pos. 1 Y081, 5, mom., keypull pos. 1 Y1907 w/common, 90, keypull pos. 1 Y1907U w/common, 90, keypull pos. 1, & Y1900S w/common, 90, keypull pos. 1,, & Keying (STD.) Two nickel plated brass keys ( & 5 tumbler) or two die cast zinc alloy keys with chrome plating (6 tumbler) 6 Two nickel plated brass keys with code on lock face ock Type A (STD.) Tumbler lock (YXO8 models) C (STD.) Tumbler lock with detent V (STD.) 6 Tumbler tubular lock B 5 Tumbler lock R Tumbler lock with detent and anti-static switch W 6 Tumbler tubular lock with anti-static switch ock Finish (STD.) Stainless steel facing 1 Nickel with removable dress nut Polished nickel with removable dress nut 8 Gloss black facing F Polished nickel facing - Terminations Contact Material 0 (STD.) Solder lug with hole Q (STD.) Silver 01 Solder lug with notch B Gold 0 PC Thru-hole G Gold over silver 07 Solder lug with hole (Y19OXX models only) WC Wire lead Seal NONE (STD.) No seal Mounting/ock Style E Epoxy seal N (STD.) With nut D With clip With removable dress nut and latch pawl R With removable dress nut

3 C&K Y Series, 5 & 6 Tumbler s SWITCH AND OCK FUNCTION SINGE & DOUBE POE SWITCHES CONNECTED TERMINAS TUMBERS POES MODE POS. POS. POS. KEY PU POSITIONS OCK CONFIGURATION INDEXING, 5 & 6 Y , 5 & 6 Y1001U Y001U, , , 6-7 Positions 1 & & 5 Y1008 Y008, , , - 5º Y100AA Y00AA, , , - Positions 1, & Y100AB Y00AB, , , , 7-8 Positions 1,, &, 5 & 6 Y1011 Y011, , 5-7 & 5 Y1011C Y011C, , 5-7 Position, 5 & 6 Y1011U Y011U, , 5-7 Positions 1 & 90º Y Y117U Positions 1, & SINGE & DOUBE POE MOMENTARY SWITCHES TUMBERS POES MODE Y1081 Y081, -5 CONNECTED TERMINAS POS. POS. POS. 1-1-, 5-6 KEY PU POSITIONS OCK CONFIGURATION INDEXING 5º Mom. EGEND = Momentary Positions (5º) = Detent Positions (5º or 90º ) = Key pull possible in these positions. = Stop Positions TERMINA NUMBERS Terminal numbers molded on bottom of housing. All models with all options when ordered with G or Q contact material. Third Angle Projection -

4 SWITCH AND OCK FUNCTION C&K Y Series, 5 & 6 Tumbler s TUMBERS POES MODE Y1907 C-1 SINGE POE SWITCHES WITH COMMON C- CONNECTED TERMINAS POS. POS. POS. C- KEY PU POSITIONS OCK CONFIGURATION Y1907U Positions 1, & 90º INDEXING Y1900S C-1 C- C- C- Positions 1,, & EGEND = Detent Positions (5º or 90º) = Key pull possible in these positions. = Stop Positions TERMINA NUMBERS Terminal numbers marked on insulator. All models with all options when ordered with G or Q contact material. NOTE: Epoxy seal not available. Removable dress nut not available with any Y190XX models. & 5 Tumbler SOTS IN THIS OCATION FOR MOUNTING STYE 'D' CIP 6 Tumbler Part number shown: Y1001C0NQ SOTS IN THIS OCATION FOR MOUNTING STYE 'D' CIP Part number shown: Y1011UV0NQ -5 Third Angle Projection

5 C&K Y Series, 5 & 6 Tumbler s SWITCH AND OCK FUNCTION AVAIABE OPTION COMBINATIONS OCK TYPES TERMINATIONS MOUNTING/OCK STYES MODES A B C R V W WC D N R YX001 YX001U YX008 YX00AX YX011 YX011C YX01IU Y11XX YX081 YX08AH Y190XX YX08AD YX08AJ KEYING KEYING OPTION CODE KEYING OPTIONS CODE ON KEY CODE ON OCK (STD.) NICKE PATED BRASS KEYS ( & 5 TUMBER) or DIE CAST CHROME PATED ZINC AOY KEYS (6 TUMBER) YES NO 6 NICKE PATED BRASS KEYS, & 5 TUMBER ONY YES YES NOTE: All orders keyed alike, standard. For more than one key code, master keying, replacement keys, or other special features, consult Customer Service Center. NICKE PATED BRASS KEY 1.65 ( TUMBER) (1,5) NICKE PATED BRASS KEY 1.7 (5 TUMBER) (,0) CHROME PATED ZINC AOY KEY.90 (,91).798 (0,6) A (19,68) Key part number: NOTE: Keys are available separately, see page -10. C (STD.) TUMBER OCK WITH DETENT OCK TYPE Key part number: V (STD.) 6 TUMBER TUBUAR OCK Code number on opposite side of key..871 (,1) 1.89 (,7) Key part number: 6C1AAAA A TUMBER OCK (MOMENTARY MODES ONY) B 5 TUMBER OCK Available with ock Finish '' only. -6

6 OCK TYPE C&K Y Series, 5 & 6 Tumbler s SHORT ANTI-STATIC OCK TYPES R TUMBER OCK WITH DETENT AND SHORT ANTI-STATIC SWITCH. W 6 TUMBER TUBUAR OCK WITH ANTI-STATIC SWITCH Available with ock Finish '' only. NOTE: For available option combinations, see page -9. U.S. Pat. No.,69,56 Exceeds 0 KV DC static sea level, lock body to terminals. OCK FINISH (STD.) STAINESS STEE 1 NICKE POISHED NICKE 8 GOSS BACK F POISHED NICKE Available with ock Types V & W only. NOTE: For available option combinations, see page -9. TERMINATIONS 0 (STD.) SODER UG WITH HOE 01 SODER UG WITH NOTCH 0 PC THRU-HOE WC WIRE EAD All Models Except Y190 0 PC THRU-HOE 07 SODER UG WITH HOE WC WIRE EAD Black wire standard. other colors and lengths available, consult Customer Service Center. U style PC MOUNTING Y190 Model Only Black wire standard. other colors and lengths available, consult Customer Service Center. U style

7 C&K Y Series, 5 & 6 Tumbler s MOUNTING/OCK STYE N (STD.) WITH NUT D WITH CIP PANE MOUNTING /± UNS (5,65).615 (15,6).100 (,5).875 (,) (9,1) (5,65).00 (0,76).15 thk. (,18) Nut part number: Clip part number: (6,6) OPTION CODE N MOUNTING STYE (STD.) WITH NUT PANE THICKNESS (,16-,67) D WITH CIP (,16-,67) R REMOVABE DRESS NUT PANE MOUNTING TYPICA INSTAATION Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. REMOVABE DRESS NUT WITH ATCH PAW NOTE: Removable dress nut not available with Y1900A model. OCK DIMENSIONS DIMENSIONS OCK TYPES A A, N.70 (6,68) C, R.60 (9,1) PANE MOUNTING atch pawl shown in pos Third Angle Projection

8 MOUNTING/OCK STYE C&K Y Series, 5 & 6 Tumbler s Mounting Information (All Models) PANE THICKNESS MOUNTING STYES A, B OCK TYPES C, R OCK TYPES V, W OCK TYPES D (1, 65-, 16) (, 16-, 67) N.105 (, 67) max..195 (, 95) max..15 (5, 6) max..15 (5, 6) max. R.15 (, 18) max..15 (5, 6) max. MOUNTING AVAIABE OPTION COMBINATIONS OCK FINISHES OCK TYPES STYES 1 8 F A B C R V W D N R CONTACT MATERIA OPTION CODE CONTACT AND TERMINA MATERIA RATINGS Q (STD.) SIVER POWER 15 V AC OR 8 V DC; 50 V AC (U/CSA). B GOD 1 OW EVE/DRY CIRCUIT 0. VA 0 V AC OR DC MAX. G GOD OVER SIVER OW EVE/DRY CIRCUIT OR POWER 0. VA 0 V AC OR DC MAX. OR 15 V AC OR 8 V DC; 50 V AC (U/CSA). CONTACT MATERIA/APPICATION RECOMMENDATIONS SEE SECTION N. 1 CONTACTS & TERMINAS: Copper, with gold plate over nickel plate. CONTACTS & TERMINAS: Copper, silver plated (std. with all termination options). CONTACTS & TERMINAS: Copper, with gold plate over silver plate. All models with all options when ordered with G or Q contact material. SEA NONE (STD.) NO SEA E EPOXY SEA EPOXY.075 MAX. (1,91) Third Angle Projection -9

9 C&K Y Series, 5 & 6 Tumbler s AVAIABE HARDWARE Key Code: A16 TUMBER Key Code: D001 5 TUMBER PART (ONE KEY) Material: Brass Finish: Nickel plate PART (ONE KEY) Material: Brass Finish: Nickel plate Key Code: AAAA PART (ONE KEY) 6C1AAAA Material: Zinc alloy Finish: Chrome plate NOTE: Additional nuts available separately, see section N. -10