METAL AND INSULATING BOXES AND ENCLOSURES
|
|
- Loraine Dixon
- 7 years ago
- Views:
Transcription
1 METAL AND INSULATING BOXES AND ENCLOSURES Presentation 4/2 Selection guide 4/4 D/DX Boxes and enclosures 4/8 DPC Junction boxes 4/12 IBS/IBP Insulated industrial boxes 4/16
2 Metal and insulating junction boxes and enclosures This line of products suits a very wide range of applications, from cable connection to protection of electronic components. A wide range of models with perfectly-studied dimensions, metal and insulating materials that feature ideal characteristics and numerous versions: with lid or transparent doors, bases with or without knock-outs for cable passage, devices for fixing material or mounting plates, etc. With all these options, this series offers many application possibilities. METAL D-DX Degree of protection No. of sizes/models Dimensions (mm) Material Insulated From to IP55 20/ Enclosure features Metal Sides Membrane glands c Knock-outs Plain Lids Opaque Transparent Mounting plates c c c c Page 4/8 4/2
3 c D-DX junction boxes and metal enclosures: Made of sheet steel protected inside and out with polyester epoxy paint, ranges with plain sides or knock-outs, high and low lids. c DPC insulated junction boxes: Made of self-extinguishing polycarbonate and double insulation. The bases are equipped with grooves for fixing equipment. c IBS-IBP insulated junction boxes: Made of ABS or polycarbonate, insulating, self-extinguishing and halogen free. With opaque or transparent lid, equipped with sealing gasket and grooves in the base and lid for fixing equipment. The IBS-IBP boxes and their many accessories are designed to meet the requirements of a wide range of applications. INSULATED DPC IP55 10/ INSULATED IBS-IBP IP65 22/ ABS ABS/polycarbonate c c c c c c c c c 4/12 4/18 4/3
4 BOXES AND ENCLOSURES Selection guide D-DX Metal boxes Metal enclosures Without knock-outs With knock-outs Without knock-outs With knock-outs Box dimensions (mm) Mounting plates Height Width Depth Low lid High lid Low lid High lid Low lid High lid Low lid High lid DBN 8/8 - DB 8/8M DBN 10/10 - DB 10/10M DBN 15/10 - DB 15/10M PMD DBN 20/15 - DB 20/15M - DBNX 20/15 - DBX 20/15M - PMD DBN 25/20 - DB 25/20M - DBNX 25/20 - DBX 25/20M - PMD DBN 30/25 - DB 3025M - DBNX 30/25 - DBX 30/25M - PMD DBN 35/30 - DB 35/30M - DBNX 35/30 - DBX 35/30M - PMD DAN 15/10 - DA 15/ PMD DAN 20/15 - DA 20/15 - DANX 20/15 - DAX 20/15M PMD DAN 25/20 - DA 25/20 - DANX 25/20 - DAX 25/20M PMD DAN 30/25 - DA 30/25 - DANX 30/25 - DAX 30/25M PMD DAN 35/30 - DA 35/30 - DANX 35/30 - DAX 35/30M PMD 3530 Page 4/9 4/9 4/9 4/9 4/11 4/11 4/11 4/11 4/9 DPC With membrane glands Box dimensions (mm) Mounting plates Height Width Depth Ø 0 44 DPC 65 - Ø DPC DPC 8/ DPC 10/ DPC 12/ DPC 15/10 PMDP DPC 20/15 PMDP DPC 25/20 PMDP DPC 30/22 PMDP DPC 40/30 PMDP 4030 Page 4/12 4/12 4/4
5 IBS-IBP ABS Polycarbonate UL Polycarbonate Box dimensions (mm) IP66 - IK0 IP66 - IK0 IP66 - IK0 Height Width Depth High lid Opaque lid Transparent lid Opaque lid Transparent lid Transparent lid Transparent lid IBS /5 - IBP /5 - IBP /5UL IBS 88/5 - IBP 88/5 - IBP 88/5UL IBS 11/6 - IBP 11/6 - IBP 11/6UL IBS 11/ IBS 1111/6 - IBP 1111/6 - IBP 1111/6UL IBS 1111/ IBS 139/ IBS 139/T IBP 139/ IBP 139/T IBP 139/UL IBP 139/TUL IBS 1612/8 IBS 1612/8T IBP 1612/8 IBP 1612/8T IBP 1612/8UL IBP 1612/8TUL IBS 1912/8 IBS 1912/8T IBP 1912/8 IBP 1912/8T IBP 1912/8UL IBP 1912/8TUL IBS 1912/10B IBS 1912/10BT IBP 1912/10B IBP 1912/10BT IBP 1912/10BUL IBP 1912/10BTUL IBS 1912/10 IBS 1912/10T IBP 1912/10 IBP 1912/10T IBP 1912/10UL IBP 1912/10TUL IBS 1916/8 IBS 1916/8T IBP 1916/8 IBP 1916/8T IBP 1916/8UL IBP 1916/8TUL IBS 1916/10 IBS 1916/10T IBP 1916/10 IBP 1916/10T IBP 1916/10UL IBP 1916/10TUL IBS 2419/8 IBS 2419/8T IBP 2419/8 IBP 2419/8T IBP 2419/8UL IBP 2419/8TUL IBS 2419/10 IBS 2419/10T IBP 2419/10 IBP 2419/10T IBP 2419/10UL IBP 2419/10TUL IBS 2419/12 IBS 2419/12T IBP 2419/12 IBP 2419/12T IBP 2419/12UL IBP 2419/12TUL IBS 2924/8 IBS 2924/8T IBP 2924/8 IBP 2924/8T IBP 2924/8UL IBP 2924/8TUL IBS 2924/12 IBS 2924/12T IBP 2924/12 IBP 2924/12T IBP 2924/12UL IBP 2924/12TUL IBS 2924/12A IBS 2924/12AT IBP 2924/12A IBP 2924/12AT IBP 2924/12AUL IBP 2924/12ATUL IBS 2924/16 IBS 2924/16T IBP 2924/16 IBP 2924/16T IBP 2924/16UL IBP 2924/16TUL IBS 3429/12 IBS 3429/12T IBP 3429/12 IBP 3429/12T IBP 3429/12UL IBP 3429/12TUL IBS 3429/16 IBS 3429/16T IBP 3429/16 IBP 3429/16T IBP 3429/16UL IBP 3429/16TUL Page 4/19 4/19 4/19 4/19 4/19 4/19 4/5
6 Insulated and metal junction boxes Boxes and enclosures made of sheet steel protected inside and out with polyester epoxy paint in grey RAL With metric knock-outs for tube entry, and plain. 2 Two versions available: with high or low lid. 3 Bases equipped with threaded drill holes for fixing equipment. From model 15/10 and up, there are four M4 threaded holes fitted with removable plugs for direct fixing of the mounting plate. Direct wall-fixing. 4 PVC or rubber sealing gasket depending on the model. 5 Double bar lock with wing key can be installed as a handle lock. Other lock inserts are available. 4/6
7 Insulated boxes in ABS, grey RAL-035 unaffected by outdoor conditions Sealable screws. 2 Self-tapping grooves to fix terminal strips, DIN rails or equipment. 3 Possibility of installing mounting plates. 4 Safety lids and screws. 4/
8 D Pressed steel junction boxes IP55 (EN 60529) except models with knock-outs DA 25/20M DBN 15/10 Metal boxes made of sheet steel protected inside and out with textured polyester epoxy paint in grey RAL-032. The D series consists of 4 basic models: c Without knock-outs: DBN with low lid and DAN with high lid. c With knock-outs: DB with low lid and DA with high lid. c PVC sealing gasket on sizes up to 20/15 and a rubber gasket for 25/20, 30/25 and 35/30. c Bases ready for threaded drill holes for fixing equipment. From size 15/10 and up, there are four M4 threaded holes fitted with removable plugs for direct fixing of the mounting plate. c Direct wall-fixing by means of drill holes fitted with plastic plugs to ensure watertightness. 4/8
9 D Pressed steel junction boxes IP55 (EN 60529) except models with knock-outs M M M M M Group No. 1 Group No. 2 M M M M M M M Group No. 3 Group No. 4 M Dimensions (mm) FIG. 1 DBN DAN DB DA C 2.5 B D E F C 2.5 B D E F C 2.5 B D E F C 2.5 B D E F A A A A MODELS, DIMENSIONS AND REFERENCES Low lid models High lid models External dimensions (mm) Height (A) Width (B) Prof. (C) Models without knock-outs Models with knock-outs, No. of drill holes, knock-outs and group Dimensions (mm) Reference Reference Length (A) Width (B) D E F Mounting plate Weight (kg) DBN 8/8 DB 8/8M 1 No. 1 1 No DBN 10/10 DB 10/10M 2 No. 1 1 No DBN 15/10 DB 15/10M 3 No. 2 1 No PMD DBN 20/15 DB 20/15M 3 No. 3 2 No PMD DBN 25/20 DB 25/20M 3 No. 4 2 No PMD DBN 30/25 DB 30/25M 2 No. 3, 2 No. 4 3 No PMD DBN 35/30 DB 35/30M 2 No. 3, 3 No. 4 2 No. 3, 2 No PMD DAN 15/10 DA 15/10M 3 No. 2 1 No PMD DAN 20/15 DA 20/15M 3 No. 3 2 No PMD DAN 25/20 DA 25/20M 3 No. 4 2 No PMD DAN 30/25 DA 30/25M 2 No. 3, 2 No. 4 3 No PMD DAN 35/30 DA 35/30M 2 No. 3, 3 No. 4 2 No. 3, 2 No PMD /9
10 DX Small metal enclosures IP55 (EN 60529) except models with knock-outs DBX 30/25 DAX 30/25 Metal enclosures made of sheet steel protected inside and out with textured polyester epoxy paint in grey RAL-032. The DX series consists of four basic models: c Without knock-outs: DBNX with low lid and DANX with high lid. c With knock-outs: DBX with low lid and DAX with high lid (on the top and base). c Enclosures fitted with sealing gasket and M4 threaded holes fitted with removable plugs for fixing the mounting plate and/or equipment in general. c Standard double bar lock operated with wing key (standard supply). Fixing this wing key to the lock will convert it into a double bar handle lock. See other lock possibilities in the insert table. 4/10
11 DX Small metal enclosures IP55 (EN 60529) except models with knock-outs M M M M M Group No. 1 Group No. 2 M M M M M M M Group No. 3 Group No. 4 M Dimensions (mm) FIG. 1 DBNX DBX DANX DAX B 4 B 4 B 4 B 4 C 2.5 D G E F A C 2.5 D G E F A D 2.5 C G E F A D 2.5 C G E F A 6 6 G G MODELS, DIMENSIONS AND REFERENCES Low lid models High lid models External dimensions (mm) Models without knock-outs Models with knock-outs Dimensions (mm) Mounting Height Width Depth plate Reference Reference Length (A) D E F G (A) (B) (C) Weight (kg) DBNX 20/15 DBX 20/15M 2 No PMD DBNX 25/20 DBX 25/20M 2 No PMD DBNX 30/25 DBX 30/25M 3 No PMD DBNX 35/30 DBX 35/30M 2 No. 3, 2 No PMD DANX 20/15 DAX 20/15M 2 No PMD DANX 25/20 DAX 25/20M 2 No PMD DANX 30/25 DAX 30/25M 3 No PMD DANX 35/30 DAX 35/30M 2 No. 3, 2 No PMD Lock variants Type and size Operated with a key Reference Square lock Triangle lock c 6 mm c mm c 8 mm 6 mm mm 8 mm LC- LC- LC-8 LT-8 LT-8 LT-8 TC6/CRN TC/CRN TC8/CRN TT6/CRN TT/CRN TT8/CRN 405 key-type lock CL/CRN 4/11
12 DPC Insulated junction boxes IP55 (EN 60529) DPC 30/22 DPC 80 DPC 10/10 Insulated boxes consisting of base and cover made of ABS in RAL-035, unaffected by outdoor conditions. Conform to the IEC and standards. c Self-extinguishing (650 C), double insulation, high impact resistance. c Equipped with adjustable membrane glands for cable and tube entries. c Wide dimensional range up to 10 models from 66 mm to mm. c Bases equipped with grooves for fixing terminal strips, DIN rails or equipment using self-tapping screws. c Touch latch up to model (IP44). For larger models, quick and reliable closing with metal or insulated safety screws depending on the model (IP55). c Bases prepared for direct fixing to the wall, always maintaining watertightness and double insulation due to the built-in plastic plugs. c Safety screws and hinges for the DPC 30/22 and DPC 40/30 models. c AC insulation voltage: 400 V. MODELS, DIMENSIONS AND REFERENCES External dimensions (mm) Height Width Depth Reference Membrane gland No. and type Type of lock Mounting plate 0 44 DPC 65 4 max. 20 mm Touch latch DPC 80 4 max. 20 mm Touch latch DPC 8/8 6 max. 20 mm Touch latch DPC 10/10 6 max. 25 mm 4 metal screws DPC 12/8 10 max. 25 mm 4 metal screws DPC 15/10 10 max. 25 mm 4 metal screws PMDP DPC 20/15 10 max. 25 mm 4 metal screws PMDP DPC 25/20 12 max. 32 mm 4 metal screws PMDP DPC 30/22 12 max. 32 mm 4 insulated screws PMDP DPC 40/30 12 max. 45 mm 4 insulated screws PMDP /12
13 DPC Insulated junction boxes IP55 (EN 60529) Dimensions (mm) FIG. 1 DPC 65 DPC 80 DPC 8/ , DPN 10/10; DP 10/10T; DPC 10/10 DPN 12/8; DP 12/8T; DPC 12/8 DPN 15/10; DP 15/10T; DPC 15/ , , , ,5 DPN 20/15; DP 20/15T; DPC 20/15 DPN 25/20; DP 25/20T; DPC 25/20 DPN 30/22; DP 30/22T; DPC 30/ DPN 40/30; DP 40/30T; DPC 40/ DPN without cable entries and plain lid. DP...T without cable entries and transparent lid. 4/13
14 DPC Insulated junction boxes IP55 (EN 60529) Insulated industrial boxes Self-tapping grooves for fixing terminal strips, DIN rails or equipment. Safety lids and screws beginning with model Central fixing point, up to the models, eliminating the need to drill into the box. It uses a joined screwand-stud system upon which one threads directly from the inside of the box using a screwdriver. Indication of the distance between holes to facilitate installation. Sealable screws for references DPC 30/22 and DPC 40/30. Hinges included for models DPC 30/22 and DPC 40/30. 4/14
15 C B A D DPC Insulated junction boxes IP55 (EN 60529) Adjustable membrane glands Insulated membrane glands made of PVC with cut-out entry for cables or tubes. Ref.: ECDPC. Reference A B C D E F ECDPC ECDPC ECDPC ECDPC max. tube E F Wall-fixing rawlplugs c For fixing to one central point, possible up to models DPC65-DPC80- DPC8/8. c Suitable for any kind of wall: c Brick. c Concrete. c Drywall. c Chipboard walls, due to the expandable rawlplugs. c Colour RAL-035. c Drill hole diameter: 8 mm. c Thread diameter: 1.5 mm. Ref.: TAD. 4/15
16 IBS-IBP insulated industrial boxes, strong and easy to install Made of two types of insulated materials, selfextinguishing and halogen-free: c IBS (ABS boxes) for the most common uses. c IBP (Polycarbonate boxes) for high-performance uses: impact, temperature and UV resistant. Elegant and strong design. Its colour (RAL 035) enables it to easily blend into any environment. Sealing gasket that ensures the IP66. Practical cardboard packaging, reusable once the box has been fitted. Fixing grooves in the base and cover of the same diameter for fixing all accessories with just one type of screw, TOR/IB. The coupling kit enables two or more boxes to be connected, maintaining the IP and allowing cables to pass through. 4/16
17 3 wall-fixing methods: c Through the 4 corner chimneys in the box corners outside the watertight area. c With wall-fixing brackets. c Directly through the base openings. IBS (ABS) and IBP (polycarbonate) boxes are designed to be used in highly demanding environments requiring protection against liquids or dust, for electrical components, etc.: c Watertightness: IP66 for all boxes. c Impact resistance: c IK0 for ABS boxes. c IK08 for polycarbonate boxes. c Incandescent wire resistance: c ABS: 650 C. c PC: 50 C. c PC (UL): 960 C. In addition to our standard solutions, it is possible to customise boxes to your specific requirements: c Harmonising with the design and ergonomics of your equipment. c Reducing production times. c Easily and directly integrating into your industrial process. Customisation options exist for: c Accessory mounting. c Drilling. c Colours. c Marking. c Packaging. 4/1
18 IBS-IBP Insulated industrial boxes IBS, IBP IBS... IBP... Constructive features: c Insulated boxes consisting of a base and a cover. c Sealing gasket between base and cover that ensures the IP66. c 4 lid-locking screws that are easily inserted with a flat screwdriver. c Beginning with the size mm, the standard lid-locking screws can be replaced with other double bar, square or triangular types of lock. c 3 wall-fixing methods: through the 4 chimneys in the box corners, using wall-fixing brackets or directly through the openings in the base. c Fixing grooves in base and cover for fixing accessories using self-tapping screws with a diameter of 4 mm Ref.: TOR/IB (not supplied). c Regulation of accessories in depth using EX and EXA lifting brackets. c Hinges adaptable to all boxes with 20 and 40 mm deth covers. Technical specifications: c IP66 conforming to EN c NEMA 4 & 4X according to NEMA /18
19 IBS-IBP Insulated industrial boxes c Double insulation (class II) conforming to IEC c Colour: - body: grey RAL-035, - lid: grey RAL-035 or transparent lid. c Halogen-free, self-extinguishing and insulating plastic materials. c Resistance to chemical and atmospheric agents. c Conforming to standard EN IBS boxes External dimensions (mm) Reference Height Width Depth Height cover Opaque cover Transp. cover IBS / IBS 88/ IBS 11/ IBS 11/ IBS 1111/ IBS 1111/ IBS 139/ IBS 139/T IBS 1612/8 IBS 1612/8T IBS 1912/8 IBS 1912/8T IBS 1912/10B IBS 1912/10BT IBS 1912/10 IBS 1912/10T IBS 1916/8 IBS 1916/8T IBS 1916/10 IBS 1916/10T IBS 2419/8 IBS 2419/8T IBS 2419/10 IBS 2419/10T IBS 2419/12 IBS 2419/12T IBS 2924/8 IBS 2924/8T IBS 2924/12 IBS 2924/12T IBS 2924/12A IBS 2924/12AT IBS 2924/16 IBS 2924/16T IBS 3429/12 IBS 3429/12T IBS 3429/16 IBS 3429/16T c Material: ABS. c IK0 (2J) conforming to EN c Incandescent wire resistance: 650 C according to CEI c Operating temperature: 25 to +60 C. c Installation temperature: 15 to +40 C. IBP boxes External dimensions (mm) PC Reference PC (UL) Reference Height Width Depth Height cover Opaque cover Transp. cover Opaque cover Transp. cover IBP /5 - IBP /5UL IBP 88/5 - IBP 88/5UL IBP 11/6 - IBP 11/6UL IBP 1111/6 - IBP 1111/6UL IBP 139/ IBP 139/T IBP 139/UL IBP 139/TUL IBP 1612/8 IBP 1612/8T IBP 1612/8UL IBP 1612/8TUL IBP 1912/8 IBP 1912/8T IBP 1912/8UL IBP 1912/8TUL IBP 1912/10B IBP 1912/10BT IBP 1912/10BUL IBP 1912/10BTUL IBP 1912/10 IBP 1912/10T IBP 1912/10UL IBP 1912/10TUL IBP 1916/8 IBP 1916/8T IBP 1916/8UL IBP 1916/8TUL IBP 1916/10 IBP 1916/10T IBP 1916/10UL IBP 1916/10TUL IBP 2419/8 IBP 2419/8T IBP 2419/8UL IBP 2419/8TUL IBP 2419/10 IBP 2419/10T IBP 2419/10UL IBP 2419/10TUL IBP 2419/12 IBP 2419/12T IBP 2419/12UL IBP 2419/12TUL IBP 2924/8 IBP 2924/8T IBP 2924/8UL IBP 2924/8TUL IBP 2924/12 IBP 2924/12T IBP 2924/12UL IBP 2924/12TUL IBP 2924/12A IBP 2924/12AT IBP 2924/12AUL IBP 2924/12ATUL IBP 2924/16 IBP 2924/16T IBP 2924/16UL IBP 2924/16TUL IBP 3429/12 IBP 3429/12T IBP 3429/12UL IBP 3429/12TUL IBP 3429/16 IBP 3429/16T IBP 3429/16UL IBP 3429/16TUL c Material: polycarbonate. c IK08 (5J) conforming to EN c Incandescent wire resistance: 50 C. c Operating temperature: 25 to +80 C. c Installation temperature: 15 to +60 C. 4/19
20 IBS-IBP Insulated industrial boxes IBS boxes for pushbutton installation c Insulated boxes with 22.5 mm drill holes for installing pushbuttons (not supplied). c IP54, NEMA 13 (equipped boxes). c IK0. c Colour: light grey RAL-035 and yellow RAL-1021 emergency stop. c Bases with concentric knock-outs for 20 mm ISO-metric cable entries. External dimensions (mm) Boxes with pushbuttons Height Width Depth Reference No. perforations 16/20 mm knock-outs IBS /5H1 1 4 IBS /5H1PE* IBS 11/6H2 2 6 * Yellow emergency stop. IBS 11/6H3 3 6 IBS boxes with pushbuttons c Insulated boxes with built-in pushbuttons. c Start/stop function with two pushbuttons. c Raise/lower/stop function with three pushbuttons. c Technical specifications of the contacts: c Positive opening NC contact conforming to IEC-EN appendix K. c Mechanical durability of the emergency stop contacts: 0.1 million switching cycles. c Mechanical durability of NC and NO contacts: 5 million cycles. c Short-circuit protection: 10 A. External dimensions (mm) Boxes with pushbuttons Height Width Depth Reference No. pushbuttons 16/20 mm knock-outs IBS /5P1PE* 1 (emergency stop) IBS 11/6P2 2 (start, stop) IBS 11/6P3 3 (raise, lower, stop) 6 *Yellow emergency stop. Contact type Function NO NC Emergency stop 1 1 Start/stop 1 1 Start 1 - Stop - 1 Raise/lower/stop Raise 1 - Lower 1 - Stop - 1 4/20
21 IBS-IBP Insulated industrial boxes IBP boxes with cable entries c Insulated plastic boxes in polycarbonate consisting of base and cover with knock-outs for installing cable entries. c IP66, NEMA 4 & 4X. c IK08. c Colour: light grey RAL-035. Mounting kit for cable entries: c For cable entries with dimensions according to SEN , FL13 ( mm) and FL21 ( mm). c Supply includes sealing gasket and screws (entry plates not supplied). External dimensions (mm) Boxes with cable entries Height Width Depth Opaque cover Transp. cover Cable entry IBP 2419/8ST IBP 2419/8TST 4 FL IBP 2924/12ST IBP 2924/12TST 2 FL13+2 FL IBP 3429/12ST IBP 3429/12TST 4 FL21 Mounting kit for cable entries Reference JFL13 JFL21 SEN model FL13 FL21 Mounting plates c Made of galvanised steel (thickness of 15/10 mm) or insulated material (thickness of 25/10 mm). c They are fixed directly to the base or cover with TOR/IB self-tapping screws (not provided). For boxes with dimensions (mm) Dimensions (mm) Reference Metal Insulating Height Width Depth A B Metal Insulated PMIB 1916 PMAIB PMIB 2419 PMAIB PMIB 2419 PMAIB PMIB 2924 PMAIB PMIB 3429 PMAIB /21
22 IBS-IBP Insulated industrial boxes DIN rails c Fixed directly to the base or cover with 4 mm TOR/IB self-tapping screws, which are not provided (except in 15 5 mm). c Aluminium HPUL rail for telecommunication uses. Support included. Rails Box 10,5 1 5,5 Box with rail 15 5 mm 15 2, Box with two 35.5 mm rails ,5 9 5,5 10,5 16 External dimensions 15 5 mm 35.5 mm mm Asymmetrical HPUL Telecom. (mm) 116 COIB 15/116 COIB 35/ COIB 15/164 COIB 35/ COIB 15/192 COIB 35/ COIB 15/241 COIB 35/241 COIB 3515/241 CAIB COIB 15/291 COIB 35/291 COIB 3515/291 CAIB 291 CTIB COIB 15/341 COIB 35/341 COIB 3515/341 CAIB 341 CTIB Lifting brackets Self-tapping lifting brackets: c On one end they are made of a 4 mm self-tapping screw for direct fixing to the base of the box, and at the other end of an M4 thread for direct fixing of equipment, mounting plates, etc. using an M4 screw or for coupling with a secondary lifting bracket. Secondary lifting brackets: c For mounting on the self-tapping lifting brackets. Height Self-tapping lifting brackets Secondary M4 lifting brackets 15 mm EXA 15/4 EX 15/4 20 mm EXA 20/4 EX 20/4 30 mm EXA 30/4 EX 30/4 Locking screws c Boxes are supplied with 4 easy-turn screws requiring the use of a 4 to 5.5 mm flat screwdriver. c From size and up, the standard supply screw can be substituted with other types of standardised screws. c Once the standard screw has been removed, the new screw is positioned with simple pressure. Cover 20 mm 40 mm 60 mm Square 6 mm TCC6IB 20 TCC6IB 40 TCC6IB 60 mm TCCIB 20 TCCIB 40 TCCIB 60 8 mm TCC8IB 20 TCC8IB 40 TCC8IB 60 Triangle 6.5 mm TCT6IB 20 TCT6IB 40 TCT6IB 60 8 mm TCT8IB 20 TCT8IB 40 TCT8IB 60 Double bar 3 mm TCDB3IB 20 TCDB3IB 40 TCDB3IB 60 5 mm TCDB5IB 20 TCDB5IB 40 TCDB5IB 60 Standard screw (screwdriver) TCDIB 20 TCDIB 40 TCDIB 60 4/22
23 IBS-IBP Insulated industrial boxes Fixing brackets c Adaptable to all boxes from size mm and up. c They can be used vertically or horizontally. c Sets of 4 fixing brackets and screws. Ref.: PFIB. Hinges c Adaptable to all covers of 20 mm and 40 mm from size mm and up. c Set of two hinges with fixing screws. c Maximum load of cover with hinges: 10 kg/m 2. c Hinges allow the cover to fully open. Cover 20 mm 40 mm Hinges BIB 20 BIB 40 Handle c They are directly fixed onto standard screws. c Allows the box to be opened without the need for a screwdriver. Ref.: MIB. 4/23
24 IBS-IBP Insulated industrial boxes Terminal blocks and supports c Terminals can be easily fixed to the supports with clips. c Boxes from size mm and up accept 12 2 mm strip support bars. c The individual TTIB earthing terminal is fixed to boxes smaller than mm. Max. connection capacity: mm 2. Internal body dimensions length depth Reference mm SBIB mm SBIB mm SBIB8 Terminal blocks Description No. of holes Black Blue Green RBIB22TN RBIB22TA RBIB22TV RBIB31TN RBIB31TA RBIB31TV Terminal blocks per support 15 mm support 225 mm support 25 mm support Terminal blocks Box Coupling kit c Makes the coupling of two or more boxes possible without reducing the IP. c A perforation with a diameter of 32 mm must be made in the boxes to be coupled for their installation. To increase cable passage capacity, a second kit can be added by drilling an additional 32 mm hole. c 2 kits are provided. Ref.: UM/DHS. 4/24
25 IBS-IBP Insulated industrial boxes Cable entries c IP55. c RAL-035. c Material: SB5. Reference Cable/tube (mm) Perforation (mm) ECIB D ECIB D ECIB D ECIB D ISO cable entries c IP6. c According to standard EN c Material: EPDM. c Adapted to boxes with a thickness of 1 to 4 mm (0.5 to 2 mm for Ref: ECIB-M12). c Fast installation without the need for tools. Reference ISO Cable (mm) Perforation (mm) ECIB M12 M ECIB M16 M ECIB M20 M ECIB M25 M ECIB M32 M ECIB M40 M ECIB M50 M /25
26 IBS-IBP Insulated industrial boxes Cable gland c IP68, 5 bar. c Conforming to standard EN c Grey RAL-035. c Material: PA6, neoprene gasket. c Operating temperature: C up to +150 C for short periods. c Cable glands are supplied with nuts. Cable glands c Using a multi-cable gasket, it is possible to pass various cables through one single cable gland. Multicable gasket Transport plug (for temporary protection of box contents). 1-cable cable gland Multi-cable gasket Transport plug Gasket reference Plug reference reference Reference min./max. (mm) Reference No. / (mm) M12 PE M12 3/ JPE M12 TPE M12 - M16 PE M16 4/8 JM24 M JPE M16 TPE M16 TTPE M16 M20 PE M20 6/12 JM34 M JPE M20 TPE M20 TTPE M20 M25 PE M25 11/1 JM45 M JPE M25 TPE M25 TTPE M25 M32 PE M32 15/21 JM65 M JPE M32 TPE M32 TTPE M32 M40 PE M40 19/ JPE M40 TPE M40 TTPE M40 Ventilation entries c Allows the boxes to be ventilated without reducing the IP. c IP68, 1 bar (0.1 bars for high airflow version). c Material: PA6 V2, copolymer acrylic membrane, water- and oil-resistant. c Operating temperature: C. c dp permeability = 0 mbar: c Ref. VM12 = m 3 /h (standard). c Ref. VM12AC = 0.12 m 3 /h (high flow). Reference (mm) Flow (m 3 /h) VM12 M VM12AC M /26
27 IBS-IBP Insulated industrial boxes Dimensions (mm) FIG mm box interior side back 65 5,4 34 Ø ,5 3,5 2 4,2 53,5 Ø mm box interior side back 56 5,4 Ø , ,5 2 4,2 53, mm box interior side back 44 5, , , ,5 65 3,5 2 55,2 61, mm box interior side back cover 84 5, , mm box interior side back cover 4,2 1 2,5 2, , , /2
28 IBS-IBP Insulated industrial boxes FIG mm box ,5 22, ,2 5, , or 100 mm box 4, height 80 mm ( ) height 100 mm ( ) 98 22,5 5 22, ,4 158, , , or 100 mm box height 80 mm ( ) height 100 mm ( ) 158, , , /28
29 IBS-IBP Insulated industrial boxes FIG , 100 or 120 mm box height 80 mm ( ) height 100 mm ( ) height 120 mm ( ) ,1 2,1 2, Box without entries, smooth sides , 120 or 160 mm 185 height 80 mm height 120 mm ( ) ( ) height 160 mm ( ) 2, , , /29
30 IBS-IBP Insulated industrial boxes FIG or 100 mm box height 120 mm ( ) height 160 mm ( ) Coupling kit M32 4/30
Linkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationTerminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationHARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More information2.8. Ex-Recess-mounted, ceiling emergency light fittings in compact metal design
.8 Ex-Recess-mounted, ceiling emergency light fittings in compact metal design RLF/RLF-INOX 50 18-58 W / RLF/RLF-INOX 50... N 18-36 W (Zone 1,, 1, ) The explosion-protected lighting concept for clean rooms
More informationGuide to enclosures for potentially explosive atmospheres
Guide to enclosures for potentially explosive atmospheres Guide to enclosures for potentially explosive atmospheres The safety of every application, in every environment, thanks to ATEX-certified steel,
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More informationStainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
More informationTerminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
More informationP System Cubicles. Certified for more safety
P System Cubicles Prisma Plus LV Switchboards Certified for more safety Prisma Plus, an offer thought out for greater professionalism With the Prisma Plus P system, Schneider Electric proposes high-performance
More informationABB. Installation Enclosures Meter Boxes. SMB s. DMB s. Enclosures
Meter Boxes SMB s To house a single phase kilowatt hour meter Standard kwh meter mounting Square or triangular securing screw Stand off for circuit breaker Optional circuit breaker reset rod DMB s To house
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationHARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
More informationClimasys Thermal Management System. Schneider Electric Universal Enclosures 2009
Climasys Thermal Management System Schneider Electric Universal Enclosures 2009 Schneider Electric Universal Enclosures The specialist in sealed equipment What is the mission of Schneider Electric Universal
More informationPB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
More informationCONTROL DESK SOLUTIONS
DESKS CONTROL DESK SOLUTIONS Three types of solutions: - enclosures with control desk based on Areta system, with door, panel or front shelf - modular desks with and 500 mm depth - monobloc desks. 157
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationEdition Perfect combination ratiopacpro Electronic P Edition kaging www clear order..biz information in the catalogue
ratiopacpro Overview... 0 Cabinets... 1 Y Desk-top cases Y Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 06800002 Subracks/ 19" chassis...
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationSTB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
More informationStainless-steel enclosures
Stainless-steel enclosures Spacial S3X Stainless-steel wall-mounting enclosures 5/8 Dimensions 5/11 Selection guide 5/12 Spacial S3EX for potentially explosive atmospheres 5/16 Spacial SMX Stainless-steel
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationNEW RANGE OF CABINETS DRIVIATM. Innovation at your service. THE GLOBAL SPECIALIST in electrical and digital building infrastructures
NEW RANGE OF CABINETS DRIVIATM Innovation at your service THE GLOBAL SPECIALIST in electrical and digital building infrastructures Drivia true innovation The new electrical panel for the residential and
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationComponents for System Solutions E9/5. Ex d Enclosure System Made of Light Metal or Stainless Steel, "Flameproof Enclosure" Series 8264. www.stahl.
> Installation chamber can be fully used > Up to three mounting levels can be used > Saving of weight > Compact > Easy to combine > 26 enclosure versions > 15 window versions www.stahl.de 10303E00 The
More information7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
More informationAluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
More informationThe Essential Guide SAREL 2.8
The Essential Guide SAREL 2.8 The Essential Guide SAREL 2.8 1 Definition help A material for every environment SAREL: products adapted to all environments Interior industrial unclean environment: STEEL
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationScepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" We build tough products for tough environments Standing Still is Not an Option. We re proud to introduce the NEW
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More informationRe-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
More informationknow-how Giant in distributing electricity for industry Prisma GK
Prisma GK Giant know-how in distributing electricity for industry Installation system up to 630A for electrical power distribution and circuit control. Prisma GK: technology and innovation for an IP55
More information3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
More informationData Centre Solutions
Issue 6 Data Centre Solutions RACKS POWER COOLING MONITORING SECURITY SERVICE & SUPPORT The simple route to the perfect data centre Data centres are complex systems. Software, hardware and IT infrastructure
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationContrast 2 LED. Performance Compactness Complete flexibility NEW
NEW Contrast 2 LED High light output in a compact and discreet design with a wide choice of light effects created using different light distributions and accessories Performance Compactness Complete flexibility
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationA good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S A to A Plastic version for Zone and Zone A good connection Providing electrical energy there, where it is most needed even in hazardous areas for the Zones,,
More informationPlastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
More informationPlug and Socket Devices SolConeX 16 A Series 8570
www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control and signalling purposes > arge switching handle
More informationCompact pressure switch Flameproof enclosure Ex d Model PCA
Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring
More informationOLI. Oil level indicator
OLI Oil level indicator Oil level indicator Unexpected or accidental oil leakages may occur randomly along transformer s lifetime. Clear indication of oil level inside transformer tank and on load tap
More informationCable entry plate KDP
Cable entry plate KDP Even faster and simpler assembly of pre-fabricated conduits. Die KDL/E replaces the tried-andtrue KDL/N model. The single-piece frame no longer needs to be joined together. The provided
More informationH45 LED - Direct and indirect pendant
RAL 01 10 00 IP 20 230V 50/60Hz Specifications Direct and indirect light pendant linear luminaire. Aluminium profile. Diffusers in frosted polycarbonate profile. Driver included. Supplied with clear base,
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationLEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34
LEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34 2 LEVEL GAUGES WITH MAGNETIC JOINT SIZE Ø 140/220/340 58 58 TYPE LA TYPE LA 14 30 S 22 33 TYPE LA 22-34 NO. HOLES Ø D2 76 O-RING CENTRE OF THE CONSERVATOR
More informationRack Cabinets. Rack Configuration. 19 inch
Rack Cabinets Rack Configuration 19 inch 19 RACK COMPONENTS FEATURES Hallam Manufacturing s range of 19 inch racks and cabinets for today s data/communications installations are designed and manufactured
More informationPlug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
More informationOperating Instructions
Operating Instructions Cable Glands Ex d and Ex e with Compound > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Information...3 4 Designated Use...4 5 Technical Data...4
More informationR.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More informationSwitchboard system. NorLine 800
Switchboard system NorLine 800 NorLine 800 SWITCHBOARD SYSTEM 2 NorLine 800 Switchboard system Table of contents Subject Page Table of contents 2 Overview 2-3 NorLine 800 technical specifications 4 Structural
More informationPC SOLUTIONS CABINETS. - Enclosures with PC front panels with innovative design - PC enclosures with sliding shelf - Workplaces for industrial PCs
PC SOLUTIONS - Enclosures with PC front panels with innovative design - PC enclosures with sliding shelf - Workplaces for industrial PCs 123 PC SOLUTIONS ARETA PC CHARACTERISTICS/ - ARETA structure with
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationClear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationRittal Small Enclosures
R Rittal Small Enclosures Fast and perfect, with an exceptionally diverse range of system accessories The original is still the best! Packaging technology for the future Whether you require enclosures
More informationCable Tie Mounting Bases
Temperature Rating: 0ºC to 66ºC (32ºF to 150ºF) *Synthetic Rubber Adhesive Choose from adhesive-backed, epoxy or screw mounting bases! Available in a variety of materials for both indoor and outdoor use
More informationMasterseal Plus TM. ingress protected wiring devices. technical hotline +44 (0) 1268 563720. www.mkelectric.com IP66. Improved catch.
Masterseal Plus TM technical hotline +44 (0) 268 63720 Improved catch Rear drill holes Available in grey, white and black Fixed gasket speds installation gasket Now has all the features and logic plus
More informationCATALOGUE ADVANCED TECHNOLOGIES FOR TRUNKING SYSTEMS
CATALOGUE 13 ADVANCED TECHNOLOGIES FOR TRUNKING SYSTEMS Trunking specialists Who we are Canalplast is, since more than 35 years, a specialized company in the production and development of trunking systems
More informationBLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
More informationHLC A1... HLC B1... HLC F1... Data Sheet. Load cells. Special features. B2325-1.0 en
HLC B1... HLC F1... HLC A1... HLC B1... HLC F1... Load cells Special features -- Hermetically sealed (IP68) -- Max. capacities: 220 kg... 10 t -- Stainless steel -- Low overall height -- Meets EMC/ESD
More informationA sophisticated design for a demanding field. prima series
A sophisticated design for a demanding field prima series 2 nd edition 2003 prima compact horizontal interlocked sockets carefully studied A size for all versions with or without fuses. Extends horizontally
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m 32.808 ft (Red LED)
NX SERIES Compact Multi-voltage Photoelectric Power Supply Built-in Multi-voltage photoelectric sensor usable worldwide Conforming to ow Voltage and EMC Directive Multi-voltage The NX series can operate
More informationINFRARED QUARTZ WALL HEATER
INFRARED QUARTZ WALL HEATER MODEL NO: IQ2000 PART NO: 6939004 MOUNTING & OPERATION INSTRUCTIONS GC0715 INTRODUCTION Thank you for purchasing this CLARKE Infrared Wall Heater. Before attempting to use this
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More informationScepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes TM ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" Fully Certified: NEMA, UL & CSA We build tough products for tough environments Standing Still is Not an Option.
More informationREAD THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS MAY VOID YOUR WARRANTY!
READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS MAY VOID YOUR WARRANTY! The main power to any existing system must be disconnected prior to the
More informationCATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI
CATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI The Company Founded in 1973 by Mr Imes Tinti in association with his son Vanni Tinti. In 1999 the locksmith workshop became a modern industrial company
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More information19" GERMANY EXPORT RACK QUALITY PRODUCT FOR THE BEST WORK NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN
NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN AC SOCKET STRIP (AC Power Distribution) BLANK PANELS x U OPEN RACK THERMOSTAD PANEL SET CABLE MANAGEMENT PANEL WITH COVER BAYING
More informationUNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationIncorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles
Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract
More informationwww.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More informationType 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More information19 NETbox SOHO Network Wall Mounting Cabinets FAMILY
9 NETbox SOHO Network Wall Mounting Cabinets FAMILY DETAILS: Framework- Top/Bottom Cases: Multi Folded Automated Bending technology applied framework and top/bottom cases, provides a heavy duty structure
More informationMureva Assembly surface mounted wiring devices
1.0 Waterproof Assembly surface Switches P124543 P124547 External dimensions : 72 x 72 x 47 mm.. Assembly surface rockers become illuminated using bulbs and indicators in option. They can carry a label
More informationWTW SWANTM. Linear slot air diffusers of wall-to-wall design for ceilings
SWANTM WTW Linear slot air diffusers of wall-to-wall design for ceilings Quick facts Wall-to-wall installation Diffuser face of light aluminium design 2, 3 or slots Horizontal/vertical air distribution
More informationKnürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
More informationTechnical product description High-speed roll-up door Machine protection. For internal use only
Technical product description High-speed roll-up door Machine protection EN For internal use only This technical product description applies exclusively to the following door type: EFA-SRT -L MS, type
More informationSITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
More informationColocation Rack Secure, Separate Server Hosting and Housing in Data Centers
Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers An intelligent physical infrastructure is required
More informationPROLINE Go l d Se r i e s. Desk Consoles and Accessories
Modular Enclosure Systems Application PROLINE Gold Series desk consoles are ergonomically designed for use in either a sitting or standing position. Single-access consoles have a front door and solid back.
More informationPC ABS ALUMINIUM POLYESTER
19 P UMINIUM POETER FIO EURONORD FIO EURONORD UMINIUM FIO EURONORD POETER The FIO EURONORD range of enclosures is specifically designed for housing DIN-rail mounted terminal blocks. dditionally, these
More information