TITGEMEYER Tb1433GB(0116)1. Installation Tools for threaded inserts

Transcription

1 TITGEMEYER Installation Tools for threaded inserts

2 manual Hand tool R 1 Complete with reversible-ratchet ring spanner and Allen key. The force required to fix the blind rivet nut is created, in the case of the R1 hand tool, by turning the hexagon nut with the reversible-ratchet ring spanner supplied. Two or three turns are sufficient for this purpose. Blind rivet nuts M 10 in Brass and Steel Blind rivet nuts M 12 in Aluminium Blind rivet nuts in Stainless steel Height: 130 mm Length: 248 mm Weight: 0.8 kg 1 Hand tool R 1 1 Ratchet ring spanner 1 Allen key One-piece threaded mandrel 1 tool body Spare parts M 10 M 12 One-part threaded mandrel Tool body Tool complete Note The ratchet ring spanner and Allen key are both supplied in two different sizes to allow their use with thread sizes to and to M 12 respectively. 2 L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

3 manual Light-duty hand tool MS 3 A simple hand tool for light-duty/ low-volume installation. Supplied complete with three size conversion kits. Blind rivet nuts M 3 Blind rivet nuts M 3 in Aluminium Maximum stroke: 7.5 mm Height: 270 mm Length: 125 mm Weight: 0.7 kg 1 Light-duty hand tool MS 3 Rivet nut mandrel: M 3 / / Nose piece: M 3 / / Spare parts M 3 / Al Nose piece Rivet nut mandrel Low-volume hand tool MS 7 Simple to use Complete with rivet nut mandrel and nose piece for / / Blind rivet nuts Blind rivet nuts in Aluminium Blind rivet studs Maximum stroke: 4.0 mm Height: 400 mm Breite: 150 mm Weight: 1.2 kg 1 Low-volume hand tool MS 7 Rivet nut mandrel: M 3 / / / Nose piece: M 3 / / / Spare parts M 3 / Al Nose piece Rivet nut mandrel Rivet stud pulling bolt L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected] 3

4 manual Heavy-duty hand tool MS 9 Simple to use With innovative, patented rotating mechanism for simple fine- adjustment and readjustment Blind rivet nuts M 10 Blind rivet studs Maximum stroke: mm Height: 520 mm Breite: 150 mm Weight: 2.2 kg 1 Heavy-duty hand tool MS 9 Rivet nut mandrel: / / Nose piece: / / Spare parts M 10 Nose piece Rivet nut mandrel Rivet stud pulling bolt L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

5 electric Rivet nut installation tool FireBird Good price-to-performance ratio Ergonomic design Short installation times Compact, shock-proof housing Blind rivet nuts M 3 M 10 in Aluminium Blind rivet nuts M 3 in Steel Blind rivet nuts M 3 in Stainless steel Maximum stroke: Tractive effort: Motor: Length: Height: Nose cap diameter: Nose cap length: Weight: 7.0 mm 13.0 kn 14.4 volt DC motor 285 mm 287 mm 29.0 mm 87.0 mm 2.3 kg with battery 1 Rivet nut installation tool FireBird 1 Quick-replacemant battery 14.4 V / 1.3 Ah 1 Fast-charging device 14.4 V Rivet nut mandrel: / / Nose piece: / / Tool case Spare parts M 3 M 10 / Al Nose piece Rivet nut mandrel Fast-charging device 14.4 V Li-Ion Input voltage: 230 V / 50 Hz / 14.4 V DC Output voltage: 14.4 V Charging time: approx. 50 min 100 min (depending on battery) Weight: 0.6 kg Quick-replacemant battery 14.4 V / 1.3 Ah Li-Ion Weight: 0.4 kg Quick-replacemant battery 14.4 V / 2.6 Ah Li-Ion Weight: 0.5 kg Installations per battery charge M 3 M 10 / Al Aluminium Steel L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected] 5

6 hydropneumatic Rivet nut and rivet stud installation tool MS 50 Low weight Ergonomic handle is comfortable to hold Air intake can be moved to suit left handed operator Blind rivet nuts M 3 M 10 Blind rivet nuts M 3 M 12 in Aluminium Blind rivet studs Maximum stroke: Tractive effort: Air consumption per operation: Length: Height: Nose cap diameter: Nose cap length: Weight: 5.8 mm 23.5 kn at 6 bar 6 litres approx 270 mm 250 mm 22.0 mm 70.0 mm 2.3 kg Rivet nut installation tool MS 50 Rivet nut mandrel: / / / Nose piece: / / / Oil syringe Angled air adaptor ,8 ø 22 Spare parts M 3 M 10 M 12 Nose piece Rivet nut mandrel Rivet stud pulling bolt L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

7 hydropneumatic Rivet nut installation tool MS 100 Low weight Ergonomic handle is comfortable to hold Air intake can be moved to suit left handed operator. Installs blind rivet nuts and studs efficiently. Powerful enough for M 16. Blind rivet nuts M 16* Maximum stroke: 9.0 mm Tractive effort: 34.0 kn at 6 bar Air consumption per operation: 7 litres approx Length: 315 mm Height: 300 mm Nose cap diameter: 30.0 mm Nose cap length: 75.0 mm Weight: 2.9 kg 1 Rivet nut installation tool MS 100 Rivet nut mandrel: M 10 / M 12 Nose piece: M 10 / M 12 Oil syringe Angled air adaptor ø * The handling of M 16 blind rivet nuts must be checked on an individual basis 300 Spare parts M 10 M 12 M 14 M 16 Nose piece Rivet nut mandrel L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected] 7

8 hydropneumatic POP rivet tool PNT800L-PC Pneumatic Control (PC) The Pneumatic Control (PC) line of installation tools for POP Nut TM blind rivet nuts uses a power-driven stroke cut-off during the installation process. This means that blind rivet nuts can be evenly installed within their grip range without having to manually adjust the stroke. No need to adjust the stroke even if the same blind rivet nuts have different grip ranges No damage to rivet nut mandrels or blind rivet nuts or damage resulting from the installation tool accidentally firing several times Uniform installation even with varying parameters of use Easy-trigger "spin pull" feature Quick-change feature for rivet nut mandrel and nose piece Blind rivet nuts M 10 in Aluminium Blind rivet nuts M 10 in Steel and Stainless steel Maximum stroke: 6.5 mm Tractive effort: 17.0 kn at 5 bar Air consumption per operation: 6.5 litres approx Length: 288 mm Height: 268 mm Nose cap diameter: 22.0 mm Nose cap length: 59.0 mm (without rivet nut mandrel) Weight: 1.8 kg 1 PNT800L-PC rivet tool Nose piece: / / / x 20 cheese head screw Mandrel changer Valve spring Angled air adaptor 1 Allen key 1.5 mm M 10 nose pieces on request. 8 L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

9 hydropneumatic TIOS 6100 hexagonal hole cutter Hydropneumatic tool cuts hexagonal holes for installation of hexagonal blind rivet nuts. High performance Sturdy design Easy to use One-hand operation possible Holes for hexagonal blind rivet nuts All material types with a tensile strength of up to 600 Mpa (see Table 1) Material thickness of 1.0 mm mm (see Table 2) Tractive effort: 24.4 kn at 6 bar Air consumption per operation: 7 litres approx Length: 310 mm Height: 303 mm Weight: 2.9 kg 1 TIOS 6100 hexagonal hole cutter* Angled air adaptor * Supplied without cutters or nose piece M 10 nose pieces on request. Cutters Lock nut Nose piece 1. Table: Possible Uses [Material thickness (mm)] Hole ø [mm] Material Steel Brass Aluminium Steel Brass Aluminium Steel Brass Aluminium Material thickness Mpa Replacement parts: Nose pieces and cutters depending on thread size () Nose piece Cutters for material 1 6 mm L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected] 9

10 hydraulic LSC 6010 hydraulic assembly press The LSC 6010 hydraulic assembly press is ideal for securely installing press-in fasteners. The high-quality components ensure that the assembly press always runs reliably and requires little maintenance. With a press-in force of 60 kn, every standard press-in fastener can be installed using this machine. The extensive range of accessories that come with the LSC 6010-C special edition model provides additional practical and economic means of working with metals, such as clinching, edging or chamfering Benefits at a glance Continuously adjustable installation force setting Electronic and mechanical safety system The mechanical safety system makes the installation of non-conductive rivets possible Powered by standard mains supply (400V) Easy to use, quick retooling times Low maintenance and service Excellent price-to-performance ratio Optional extras available for additional applications and uses (LSC6010-C) Dimensions: Weight: Max. press-in force: Protrusion: Operating stroke: Nominal voltage: Rated frequency: Rated current: Output: Cycle time: Height 1950 mm Width 725 mm Depth 1040 mm 450 kg 60 kn 420 mm 200 mm 3/N/PE 400/230V AC 50 Hz approx. 4.0 A 1.5 kw 2.5 to 5.2 sec. (depending on stroke) 10 L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

11 hydraulic PRESSTI punch Size long short wide T [mm] L [mm] Weight approx [kg/piece] 0.4 Description VI VI VI PRESSTI die for press-in nuts Thread M 2/M 2,5/M 3 M 10 D [mm] Weight approx. [kg/piece] Description VI VI VI VI VI VI PRESSTI die for press-in studs Thread M 2,5 M 3 M 10 D [mm] Weight approx. [kg/piece] Description VI VI VI VI VI VI VI PRESSTI die for press-in bushes Thread M 2 M 3 M 3 D [mm] Weight approx. [kg/piece] Description VI VI VI L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected] 11

12 Workstations Semi- and fully-automatic workstations for our blind rivet nut range Automatic sorting of fasteners Precise feeding of fasteners Integrated process control We design and build fully-automatic assembly systems. Our range includes riveting, power and control units, along with feed systems. The modular design of our systems allows individual elements to be combined as required. Our specialists can provide direct, onsite advice and individual solutions to problems. Just contact us. We meet your needs when it comes to well-designed fastening technology! 12 L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

13 NOTES L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected] 13

14 NOTES 14 L Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ [email protected]

15 All rights reserved. The technical data quoted in this catalogue. performance descrip - tions. recommendations and instructions e.g. for the installation of the components available from us. are without liability. These are based on our experience. Claims against us as a consequence are expressly excluded as much of the application of our goods remains outside our direct influence. It is a fundamental obligation of the user to ascertain and to decide wether the goods provided by us are appropriate for a particular application. This catalogue is our intellectual property! Disclosure to third parties is prohibited. Reproduction even in part as well as use of our illustrations and TITGEMEYER part-numbering systems is only permitted with our express permission in writing. Subject to change. Supply of goods is in conformity with our delivery and payment conditions. Gebr. TITGEMEYER GmbH & Co. KG Osnabrück

16 The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy! Designs are subject to change. Our design proposals are non-binding! TITGEMEYER, GETO, FireBird, TIOS und PRESSTI are trademarks. registered trademarks or product names belonging to the respective title holder. Gebr. TITGEMEYER GmbH & Co. KG Hannoversche Straße 97 (Navigation: Hettlicher Masch 2) Osnabrück. Germany P.O. Box Osnabrück. Germany Phone: +49 (0)5 41/ Fax: +49 (0)5 41/