Seismic & Wind Restraint and Vibration Isolation Solutions

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Seismic & Wind Restraint and Vibration Isolation Solutions"

Transcription

1 Seismic & Wind Restraint and Vibration Isolation Solutions For non-structural building components HVAC, Mechanical, Electrical and Fire-Protection equipment including Piping, Ductwork, Electrical-Cable Trays and Busbars

2 Contents Seismic Bracing Systems Gripple Seismic Bracing Systems Page 4 Seismic Snubbers AS-A and AS-AR Types Page 6 AS-B Types Page 6 AS-C and AS-CR Types Page 7 AS-D and AS-DR Types Page 7 Seismic Snubbers and Isolators AS-Z Types Page 8 ASI-R Types Page 8 Seismic Isolators ASI-S Types Page 9 ASI-T1 Types Page 9 ASI-T2 Types Page 10 ASI-T4 Types Page 10 Vibration Isolators and Hangers AVI-R Types Page 11 AVI-S and AVI-B Types Page 11 AH-R Types Page 12 AH-S Types Page 12 AH-C Types Page 13 AH-OR Types Page 13 AH-OS Types Page 14 ATR Types Page 14 Seismic Pad Isolation API-C Types Page 15 API-M and API-MC Types Page 15 2

3 What we do If you need help with seismic & wind restraining or vibration isolation for your HVAC equipment, make sure you call Gripple Inc, Acrefine Engineering s authorized partner in North America. Our services are available to companies in the commercial industry and mechanical & electrical contractors across the globe, so whether you need good quality products or engineering services, we are the company to call! Vibration and Seismic Isolation Products Our aim is to serve the global construction and industrial markets and meet their challenging needs, helping to reduce the risk involved with earthquakes and high pressure winds. We have engineers specializing in many specific fields, including (but not limited to) non-structural and structural seismic engineering, vibration isolation and acoustical control, so we are confident our team can help you. We also have a wide range of seismic and vibration products to assist construction, including Seismic Isolators and Snubbers, Vibration Isolators, Thrust Restraints and Isolation Hangers. Our aim is to serve the global construction and industrial markets and meet their challenging needs Seismic Engineering and Design We provide easy-to-reach services, competitive pricing and an ability to meet specific demands. Our services begin with research and development and continue with design, manufacturing and application, allowing us to help with every stage of development. Our engineers can always be relied on to provide advice and a high standard of service, so why not take advantage of our expertize? 3

4 Gripple Seismic Bracing Systems Max load: 860 lbs Max load: 2,200 lbs Max load: 3,850 lbs Gripple Seismic Bracing System Complete pre-engineered systems No field swaging of cables Up to 10 times faster to install No tools required Color coding allows easy field verification New or retrofit installs UL NEBS GR63 Core Certification 1.5:1 Safety Factor Introduction Gripple Seismic Bracing Systems are specifically designed and engineered to brace and secure nonstructural equipment and components within a building or structure to minimize earthquake damage to suspended components. Gripple Seismic Bracing Systems are ideal for use on nonstructural components and equipment requiring seismic design, such as in essential facilities that are required for emergency operations in the aftermath of an earthquake. 4 Way Bracing Transverse Bracing Longitudinal Bracing Important Information GRIPPLE SEISMIC restraint bracing systems should only be used in conjunction with threaded rod at required seismic bracing points. NEVER EXCEED THE MAXIMUM LOAD OF THE PRODUCT. During installation take slack out of assembly by hand pulling the tail end of the cable. COMPLIANCE WITH LOCAL CODES and, where applicable, NATIONAL CODES are the buyer s and / or installer s responsibility. INTEGRITY OF THE BUILDING STRUCTURE to which Gripple Seismic Bracing Systems are attached is the responsibility of the installer and / or specifying engineer. DO NOT APPLY LUBRICANT to any part of the assembly. DO NOT USE FOR HOISTING such as in a crane or pulley situation. DO NOT JOIN TWO CABLE ASSEMBLIES TOGETHER i.e. using the Gripple fasteners as a splice. 4

5 Gripple Seismic Bracing Systems Gripple Seismic End Fixings Left to right - Gripple 45º Eyelet, Single Bracket, Double Bracket One of three pre-assembled color coded tags for easy field verification of cable diameter Gripple Seismic Fasteners Gripple Seismic Brackets Left to right - Retrofit, Standard 4 Way Bracing Transverse Bracing Longitudinal Bracing 5

6 All Directional Restraining and Height Adjustable Seismic Snubbers AS-A Type Snubber AS-A and AS-AR Types All directional restraining Load capacity up to 2400 kg (5290 lb) on standard range Easily inspected for correct installation alignment 6.35 mm (1/4 ) thick replaceable rubber cushion on impact surfaces Can be installed horizontally or vertically Acrefine AS-A and AS-AR type snubbers are designed for floor mounted equipment. They are suitable for applications where equipment is on resilient supports such as rubber or springs and thus all-directional restraining is required. When installed snubbers remain out of contact during normal operation. They are built to withstand seismic forces so that equipment can be held in place. AS-AR Type Snubber These snubbers come in different sizes and up to 2400 kg (5290 lb) load capacity. For higher load capacities or for special applications please contact us. AS-B Types All directional restraining Load capacity up to 1500 kg (3300 lb) on standard range Height adjustable 6.35 mm (1/4 ) thick replaceable rubber cushion on impact surfaces AS-B Type Snubber Acrefine AS-B type snubbers are designed for floor mounted equipment. They have a strong base and predrilled holes. They are suitable for applications where equipment is on resilient supports such as rubber or springs where all directional restraining is required. When installed snubbers remain out of contact during normal operation. They are built to withstand seismic forces so that equipment can be held in place. AS-B Type Snubber These snubbers come in different sizes and up to 1500 kg (3300 lb) load capacity. For higher load capacities or for special applications please contact us. 6

7 Seismic Snubbers - No Overturning or Uplift and All Directional Restraining Seismic Snubbers AS-C and AS-CR Types Cost effective solution for applications with no overturning or uplift Load capacity up to 6000 kg (13225 lb) on standard range Easily inspected for correct installation 7 mm (1/4 ) thick replaceable rubber cushion on impact surfaces AS-C Type Snubber Acrefine AS-C and AS-CR type snubbers are designed for floor mounted equipment. They offer a cost effective solution for applications where equipment is on resilient supports such as rubber or springs. When installed, snubbers remain out of contact during normal operation. They are built to withstand lateral seismic forces ensuring that equipment is held in place. These snubbers come in different sizes and up to 6000 kg (13225 lb) load capacity. For higher load capacities or for special applications please contact us. AS-CR Type Snubber AS-D and AS-DR Types All directional restraining Load capacity up to 2400 kg (5290 lb) on standard range Easily inspected for correct installation alignment 7 mm (1/4 ) thick replaceable rubber cushion on impact surfaces Can be installed horizontally or vertically AS-D Type Snubber Acrefine AS-D and AS-DR type snubbers are designed for floor mounted equipment. They are suitable for applications where equipment is on resilient supports such as rubber or springs and thus all-directional restraining is required. When installed snubbers remain out of contact during normal operation. They are built to withstand seismic forces so that equipment can be held in place. These snubbers come in different sizes and up to 2400 kg (5290 lb) load capacity. For higher load capacities or for special applications please contact us. AS-DR Type Snubber 7

8 Over Turning or Uplift and Seismically Restrained Seismic Snubbers and Isolators AS-Z Type Snubber AS-Z Types Cost effective solution for applications with overturning or uplift Load capacity up to 1959 kg (4320 lb) on standard range Easily inspected for correct installation alignment 7 mm (1/4 ) thick replaceable rubber cushion on impact surfaces Acrefine AS-Z type snubbers are designed for floor mounted equipment. They offer a cost effective solution for applications where equipment is on resilient supports such as rubber or springs. When installed, snubbers remain out of contact during normal operation. They are built to withstand lateral and vertical seismic forces ensuring that equipment is held in place. These snubbers come in different sizes and up to 1959 kg (4320 lb) vertical load capacity. For higher load capacities or for special applications please contact us. ASI-R Types Steel housing that limits equipment movement in all directions Load capacity of up to 1222 kg (2659 lb) Suitable for seismic applications Three groups 40, Shore A Hardness ASI-R Type Isolator Acrefine ASI-R seismically restrained rubber mounts should be used for isolating high frequency vibrations. They are ideal for mechanical equipment such as pumps, centrifugal fans, vent sets and low pressure packaged air-handling units. ASI-R type seismically restrained rubber mounts are available with up to 5 mm (3/16 ) deflection and load capacity of up to 1222 kg (2695 lb). For higher load capacities please contact us. 8

9 Steel Housed with Seismic Bushing and Top Plate Seismic Isolators ASI-S Types Seismic steel bushing for improved performance Designed for loads up to 1555 kg (3429 lb) with 25 mm (1 ) or 50 mm (2 ) deflection springs All directional restraint, limiting equipment motion to 6 mm (1/4 ) Constant free and operational height Powder coated and color coded springs (field interchangeable) ASI-S Type Isolator Acrefine ASI-S seismic vibration isolators are designed for floor mounted equipment. These isolators are ideally suited for applications where seismic or high wind forces are likely. Spring deflections of 50 mm (2 ) provide excellent noise and vibration control. ASI-S isolators are available with 25 mm (1 ) and 50 mm (2 ) deflection springs as standard. The load range is from 7 kg (15 lb) to 1555 kg (3429 lb). For higher deflection rates or load capacities please contact us. ASI-T1 Types Designed for loads up to 3110 kg (6858 lb) with 25 mm (1 ) or 50 mm (2 ) deflection springs All directional restraint, limiting equipment motion to 6 mm (1/4 ) Constant free and operational height Powder coated and color coded springs (field interchangeable) ASI-T1 Type Isolator Acrefine ASI-T1 type seismic vibration isolators are designed for floor mounted equipment such as cooling towers, chillers and boilers. These isolators are ideally suited for applications where seismic or high wind forces are likely. Spring deflections of 50 mm (2 ) provide excellent noise and vibration control. ASI-T1 isolators are available 25 mm (1 ) and 50 mm (2 ) deflection as a standard. The load range is from 7 kg (15 lb) to 1555 kg (3429 lb). For higher deflection or load capacities please contact us. 9

10 Steel Housed with Top Plate Seismic Isolators ASI-T2 Type Isolator ASI-T2 Types Designed for loads up to 3110 kg (6858 lb) with 25 mm (1 ) or 50 mm (2 ) deflection springs All directional restraint, limiting equipment motion to 6 mm (1/4 ) Constant free and operational height Powder coated and color coded springs (field interchangeable) Acrefine ASI-T2 type seismic vibration isolators are designed for floor mounted equipment such as cooling towers, chillers and boilers. These isolators are ideally suited for applications where seismic or high wind forces are likely. Spring deflections of 50 mm (2 ) provide excellent noise and vibration control. ASI-T2 isolators are available 25 mm (1 ) and 50 mm (2 ) deflection as a standard. The load range is from 370 kg (816 lb) to 3110 kg (6858 lb). For higher deflection or load capacities please contact us. ASI-T4 Type Isolator ASI-T4 Types Designed for heavy equipment All directional restraint, limiting equipment motion to 6 mm (1/4 ) Constant free and operational height Powder coated and color coded springs Field interchangeable springs Acrefine ASI-T4 Type seismic vibration isolators are designed for floor mounted equipment such as cooling towers, chillers and boilers. These isolators are ideally suited for applications where seismic or high wind forces are likely. Spring deflections of 50 mm (2 ) provide excellent noise and vibration control. ASI-T4 isolators are available 25 mm (1 ) and 50 mm (2 ) deflection as a standard. The load range is from 3280 kg (7232 lb) to 6220 kg (13715 lb). For higher deflection or load capacities please contact us. 10

11 Open Rubber and Open Spring Vibration Isolation Vibration Isolators and Hangers AVI-R Types Load capacity up to 1222 kg (2695 lb) on standard range Max. deflection up to 5 mm (3/16 ) Color marked rubber elements for easy identification Equipment is bolted directly to the steel insert Three groups 40, 50, 60 Shore A Hardness AVI-R Type Vibration Isolator Acrefine AVI-R type vibration isolators are suitable for floor mounted mechanical equipment that generates high frequency vibration i.e. pumps, centrifugal fans, blower-coil units, vent sets, low pressure packaged air-handling units, etc. AVI-R type seismically restrained rubber mounts are available with up to 5 mm (3/16 ) deflection and load capacity up to 1222 kg (2695 lb). For higher load capacities please contact us. AVI-R Type Cross Section AVI-S and AVI-B Types Load capacity up to 1555 kg (3429 lb) on standard range Standard spring deflection of 25 mm (1 ) or 50 mm (2 ) Powder coated and color coded springs Color coded springs Field interchangeable springs AVI-S Type Vibration Isolators Acrefine AVI-S and AVI-B type vibration isolators are a cost effective solution for minimizing vibration and noise from floor mounted mechanical equipment i.e. compressors, air handling equipment, centrifugal and axial fans, pumps, etc. AVI-S and AVI-B type vibration isolators are available in 25 mm (1 ) or 50 mm (2 ) deflection as standard. The load range is from 7 kg (15 lb) to 1555 kg (3429 lb). For higher deflection or load capacities please contact us. AVI-S Type Vibration Isolator 11

12 Steel Housed Rubber and Steel Housed Spring Vibration Isolation Hangers Vibration Isolators and Hangers AH-R Type Isolation Hanger AH-R Types Double deflection rubber Load capacity up to 1380 kg (3043 lb) on standard range Max. deflection up to 13 mm (1/2 ) Designed to compensate for rod misalignment Color marked rubber elements for easy identification Field interchangeable rubber insert Three groups 40, 50, 60 Shore A Hardness Acrefine AH-R type vibration isolation hangers are suitable for suspended mechanical equipment that generates high frequency vibration i.e. pumps, fans, blower-coil units, etc. These hangers are also used on piping and ductwork in close proximity to mechanical equipment. AH-R Type Isolation Hanger Cross Section AH-R type vibration isolation hangers are available with up to 13 mm (1/2 ) deflection as a standard. The load range is from 25 kg (55 lb) to 1380 kg (3043 lb). For higher load capacities please contact us. AH-S Type Isolation Hanger AH-S Types Powder coated an color coded springs Load capacity up to 1140 kg (2514 lb) on standard range Standard spring deflection of 25 mm (1 ) or 50 mm (2 ) Compensates for up to 30º rod misalignment Can be preloaded to save valuable installation time Field interchangeable springs Supplied with coupling nut Acrefine AH-S type vibration isolation hangers are suitable for suspended mechanical equipment that generates low frequency vibration i.e. in-line fans, exhaust fans, cabinet fans, etc. These hangers are also used on piping and ductwork which is in close proximity to mechanical equipment. AH-S Type Isolation Hanger AH-S type vibration isolation hangers are available in 25 mm (1 ) and 50 mm (2 ) deflection as a standard. The load range is from 7 kg (15 lb) to 1140 kg (2514 lb). For higher deflection and/or load capacities please contact us. 12

13 Combined Hanger - Steel Housed Spring and Rubber Vibration Isolation Hanger Vibration Isolators and Hangers AH-C Types Powder coated an color coded springs Load capacity up to 1140 kg (2514 lb) on standard range Standard spring deflection of 25 mm (1 ) or 50 mm (2 ) Double deflection rubber up to 13 mm (1/2 ) static deflection Compensates for up to 30º rod misalignment Can be preloaded to save valuable installation time Field interchangeable springs Supplied with coupling nut Acrefine AH-C type vibration isolation hangers are suitable for suspended mechanical equipment such as in-line fans, exhaust fans and cabinet fans. These hangers are also used on piping and ductwork which is in close proximity to mechanical equipment. Rubber insert ensures that high frequency noise is minimized, so combined isolators provide superior performance. AH-C Type Isolation Hanger AH-C type vibration isolation hangers are available with 25 mm (1 ) or 50 mm (2 ) deflection springs and with rubber elements of up to 13 mm (1/2 ) deflection as standard. The load range is from 7 kg (15 lb) to 1140 kg (2514 lb). AH-OR Types Double deflection rubber Load capacity up to 1380 kg (3043 lb) on standard range Max. deflection up to 13 mm (1/2 ) Designed to compensate for rod misalignment Color marked rubber elements for easy identification Three groups 40, 50, 60 Shore A Hardness AH-OR Type Isolation Hanger Acrefine AH-OR type vibration isolation hangers are suitable for suspended mechanical equipment that generates low frequency vibration i.e. pumps, fans, blower-coil units, etc. These hangers are also used on piping and ductwork which is in close proximity to mechanical equipment. AH-OR type vibration isolation hangers are available with up to 13 mm (1/2 ) deflection as standard. The load range is from 25 kg (55 lb) to 1380 kg (3043 lb). For higher load capacities please contact us. AVI-S Type Vibration Isolator 13

14 Open Spring Vibration Isolation Hanger and Compression and Tension Loading Restraint Vibration Isolators and Hangers AH-OS Types Powder coated and color coded spring Load capacity up to 1140 kg (2514 lb) on standard range Standard spring deflection of 25 mm (1 ) or 50 mm (2 ) Compensates for up to 30º rod misalignment Field interchangeable springs AH-OS Type Isolation Hanger Acrefine AH-OS type spring vibration isolation hangers are suitable for suspended mechanical equipment that generates low frequency vibration i.e. in-line fans, exhaust fans, cabinet fans, etc. These hangers are also used on piping and ductwork which is in close proximity to mechanical equipment. AH-OS type vibration isolation hangers are available in 25 mm (1 ) and 50 mm (2 ) deflection as a standard. The load range is from 7 kg (15 lb) to 1140 kg (2514 lb). For higher deflection and/or load capacities please contact us. ATR Types Powder coated and color coded springs Load capacity up to 1555 kg (3429 lb) on standard range Standard spring deflection of 25 mm (1 ) or 50 mm (2 ) Field interchangeable springs Can be utilized for tension or compression loading Simple and cost effective design ATR Type Thrust Restraint Acrefine ATR type thrust restraints are recommended for fans that are installed on resilient mountings and fan thrust exceeds 10% of the isolated weight. They must be attached to structurally sound locations of the fan and duct work. Installation to bare or unreinforced sheet metal must be avoided. ATR Type Thrust Restraint ATR type thrust restraints are available in 25 mm (1 ) and 50 mm (2 ) deflection as a standard. The load range is from 50 kg (110 lb) to 1555 kg (3429 lb). For higher deflection and/or load capacities please contact us. 14

15 Modular Rubber and Modular Copolymer Vibration Isolation Pads Seismic Pad Isolation API-C Types Combined design incorporating rubber and composite metal Thickness of 26 mm (1 ) Designed for 380 kpa (55 psi) Can be cut to any size required Can be stacked with steel plates to achieve high deflection API-C Type Isolation Pad Acrefine API-C type vibration isolators are suitable for floor mounted mechanical equipment that generates high frequency vibration i.e. pumps, chillers, compressors, centrifugal fans, blower-coil units, vent sets, low pressure packaged air-handling units, etc. API-C type vibration isolation pads are available with up to 5 mm (3/16 ) deflection at 380 kpa (55 psi). If higher deflections are required the pads can be stacked with steel plates between layers. API-C Type Isolation Pad API-M and API-MC Types Modular design Through-bolt hole in each module for easy installation Fixing hole can be cut for any size and combination Can be stacked with steel plates to achieve high deflection No need to stock pre-cut pads API-M Type Isolation Pad Acrefine API-M and API-MC type vibration isolators are suitable for floor mounted mechanical equipment that generates high frequency vibration i.e. pumps, chillers, compressors, centrifugal fans, blower-coil units, vent sets, low pressure packaged air-handling units, etc. API-M type vibration isolation pads are available with up 1.44 mm (1/16 ) deflection and 90 kg (198 lb) load capacity for a single module. If higher deflections are required the pads can be stacked with steel plates between layers. API-MC Type Isolation Pad 15

16 Gripple Inc 1611 Emily Lane Aurora IL USA Tel : Fax : Acrefine Engineering Unit 42 Leyton Industrial Village Argall Avenue London E10 7QP United Kingdom Tel : Fax : Gripple Ltd (Headquarters) The Old West Gun Works Savile Street East Sheffield S4 7UQ UK UK Sales : Fax : +44 (0) Gripple Gripple is a registered trademark of Gripple Limited, Company registered in England No , VAT Reg No. GB BROC-IND-ACREFINE-US

INSTALLING SEISMIC RESTRAINTS FOR MECHANICAL EQUIPMENT

INSTALLING SEISMIC RESTRAINTS FOR MECHANICAL EQUIPMENT VISCMA 412/August 2014 INSTALLING SEISMIC RESTRAINTS FOR MECHANICAL EQUIPMENT August 2014 Developed originally by the Vibration Isolation and Seismic Control Manufacturers Association under a cooperative

More information

SEISMIC and WIND Restraint Products. 55-years of product innovation and manufacturing excellence

SEISMIC and WIND Restraint Products. 55-years of product innovation and manufacturing excellence SEISMIC and WIND Restraint Products 55-years of product innovation and manufacturing excellence Why are Seismic and Wind Restraint Needed? For hospitals and healthcare facilities, the damaging effects

More information

Vibration Isolation Products. Spring Isolators. Isolation Hangers. Thrust Restraints. Flexible Connectors. Isolation Bases. Rooftop Isolation Curbs

Vibration Isolation Products. Spring Isolators. Isolation Hangers. Thrust Restraints. Flexible Connectors. Isolation Bases. Rooftop Isolation Curbs Spring Isolators Isolation Hangers Thrust Restraints Flexible Connectors Isolation Bases Rooftop Isolation Curbs Neoprene Isolators Fiberglass Isolators Air Mounts Seismic and Wind Restraint Isolators,

More information

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC) APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines

More information

FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 412/December 2002 INSTALLING SEISMIC RESTRAINTS FOR MECHANICAL EQUIPMENT

FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 412/December 2002 INSTALLING SEISMIC RESTRAINTS FOR MECHANICAL EQUIPMENT FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 412/December 2002 INSTALLING SEISMIC RESTRAINTS FOR MECHANICAL EQUIPMENT Notice: This guide was prepared by the Vibration Isolation and Seismic Control Manufacturers

More information

KINETICS QuakeLoc Connector

KINETICS QuakeLoc Connector MADE IN THE USA MADE IN THE USA MADE IN THE USA MADE IN THE USA QuakeLoc Seismic Cable Restraint Connector for piping, duct, electrical cable trays, and suspended equipment. MADE IN THE USA QuakeKit-P

More information

Spring-Flex Hangers Series SH/RSH

Spring-Flex Hangers Series SH/RSH Bulletin No. SH/14 Spring-Flex Hangers Series SH/RSH Two Basic Designs Effective Isolation of Noise and Vibration Loads to 5,000 pounds Static Deflections to 5 inches Quickly and Easily Installed Color

More information

SMACNA Seismic Restraint Manual. Bob Wasilewski Project Manager, Technical Resources SMACNA

SMACNA Seismic Restraint Manual. Bob Wasilewski Project Manager, Technical Resources SMACNA SMACNA Seismic Restraint Manual Bob Wasilewski Project Manager, Technical Resources SMACNA ANSI/SMACNA 001-2000 Approved by ANSI July 31, 2000 History 1976 Guidelines for Seismic Restraint of Mechanical

More information

M S. Laser Alignment Standards & Procedures

M S. Laser Alignment Standards & Procedures M M S Machine Monitoring Systems Ltd Tel: +44 (0) 1869 250801 Unit 4 Business Point Fax: +44(0) 1869 250802 P.O. Box 92 Bicester OX26 5EW Laser Alignment Standards & Procedures Contents Introduction Laser

More information

Seismic Assessment of Engineering Systems in Hospitals A Challenge for Operational Continuity

Seismic Assessment of Engineering Systems in Hospitals A Challenge for Operational Continuity Seismic Assessment of Engineering Systems in Hospitals A Challenge for Operational Continuity S.R. Uma GNS Science, Lower Hutt. G.J. Beattie Building Research Association of New Zealand, Porirua. 2010

More information

VCS. MASON INDUSTRIES, Inc. COMPLETE HVAC ENGINEERING SPECIFICATIONS VCS-100-13 BULLETIN

VCS. MASON INDUSTRIES, Inc. COMPLETE HVAC ENGINEERING SPECIFICATIONS VCS-100-13 BULLETIN First Printing 1965 Revised 1973, 1974, 1975, 1976, 1979, 1982, 4/2001, 9/2001, 11/2003, 8/2005. 11/06, 1/08, 9/10 & MARCH 2014 MASON INDUSTRIES, Inc. Manufacturers of Vibration Control Products 350 Rabro

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

TOP 10 NOISE CONTROL TECHNIQUES

TOP 10 NOISE CONTROL TECHNIQUES TOP 10 NOISE CONTROL TECHNIQUES The following are 10 simple noise control techniques that have wide application across the whole of industry. In many cases, they will produce substantial noise reductions

More information

YTE Suspension. Installation & Maintenance

YTE Suspension. Installation & Maintenance YTE Suspension Installation & Maintenance For Your Trailer Axle Suspension Needs Call York : Head Office Singapore YTESuspguide.RevC.May2008 York Transport Equipment (Asia) Pte. Ltd. No. 5 Tuas Avenue

More information

POLE MOUNT SYSTEM EX-3 INSTALLATION

POLE MOUNT SYSTEM EX-3 INSTALLATION May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

POLE MOUNT SYSTEM-3 INSTALLATION

POLE MOUNT SYSTEM-3 INSTALLATION 1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only

More information

Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.

Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY. Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY. Air Pressure 586.1 min 689.5 kpa max [85 min 100 psi max] Air Displacement 721,000 mm 3 [44 in. 3 ] Figure 1 Weight

More information

SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS

SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical

More information

SECTION 23 34 13. A. Horsepower: Do not increase or decrease fan motor horsepower without written approval from Engineer.

SECTION 23 34 13. A. Horsepower: Do not increase or decrease fan motor horsepower without written approval from Engineer. PART 1 GENERAL SECTION 23 34 13 HVAC FANS 1.01 SUMMARY A. Section Includes: 1. Exhaust fans. 2. Transfer fans. B. Related Documents: 1. Drawings and general provisions of the Contract, including General

More information

Evaluating Seismic Requirements in Specifications Updated April 29, 2003

Evaluating Seismic Requirements in Specifications Updated April 29, 2003 Evaluating Seismic Requirements in Specifications Updated April 29, 2003 When reviewing a Specification, there are 4 or 5 items that are critical in determining the extent of the seismic componentry that

More information

SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment

More information

Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions 1

Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions 1 Designation: E 580/E 580M 09a Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions 1 This standard is issued

More information

Modular Access Floor for Data Center. From Rack to Row to Room to Building

Modular Access Floor for Data Center. From Rack to Row to Room to Building Modular Access Floor for Data Center From Rack to Row to Room to Building Why using Scneider Electric modular access floor in Data Centers The evolution of modern Data Centers emphasizes specific exigencies

More information

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL STERNMOUNT MARINE TOWER KIT OWNER S MANUAL VERSION 1.5 Made in the USA by: Southwest Windpower 1801 W. Route 66 Flagstaff, AZ 86001 (520) 779-9463 AIR Marine is a trademark of Southwest Windpower Inc.

More information

Hardy Frame. at top plates. 1/4 x 3" screws. on nuts and washers (Requires 5,000 psi non-shrink grout) Brace Frame HARDY FRAME BRACE FRAME 4X FILLER

Hardy Frame. at top plates. 1/4 x 3 screws. on nuts and washers (Requires 5,000 psi non-shrink grout) Brace Frame HARDY FRAME BRACE FRAME 4X FILLER FRAME On Foundations Hardy Frame Panel Hardy Frame Panel Hardy Frame Panel Hardy Frame Panel with 2x filler at top plates with 4x filler at Portal FRAME 1/4 x 4 PANEL 1/2" screws WITH 2X FILLER FRAME 1/4

More information

Part # 11366799 73-87 Chevy C10 AirBar

Part # 11366799 73-87 Chevy C10 AirBar 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11366799 73-87 Chevy C10 AirBar Components: 2 90009000 Tapered sleeve air spring 2 90000070 Air spring

More information

Highly flexible couplings

Highly flexible couplings Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations

More information

Facilities Development Division. The Building Department for California s Hospitals

Facilities Development Division. The Building Department for California s Hospitals OSHPD Special Seismic Certification Preapproval (OSP) Preapproval of Special Seismic Certification by OSHPD is a voluntary program for Equipment Manufacturers! Facilities Development Division The Building

More information

Assembly Instructions for Model: VMSA

Assembly Instructions for Model: VMSA Assembly Instructions for Model: VMSA Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50 [1270 mm] Flat panel televisions weighing up to 150 lbs. [68.2

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

NFPA 13, 2002 Edition Seismic Design for Fire Sprinkler Systems

NFPA 13, 2002 Edition Seismic Design for Fire Sprinkler Systems NFPA 13, 2002 Edition Seismic Design for Fire Sprinkler Systems Speaker Steven Scandaliato, S.E.T. Scandaliato Design Group 12354 W. Alameda Pkwy., Ste. 170 Lakewood, CO 80228 Ph: (303) 985-3300 Email:

More information

9300BC SERIES Light Commercial Door Closer

9300BC SERIES Light Commercial Door Closer Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.

More information

IT-SOLUTIONS.

IT-SOLUTIONS. IT-SOLUTIONS Well conceived Haewa Group has gained a strong profile as an innovative and competent supplier for the machinery, systems, electrical and electronic industries, well beyond European geographic

More information

Testing Capabilities. Worldwide Designers & Manufacturers of Air Moving Equipment

Testing Capabilities. Worldwide Designers & Manufacturers of Air Moving Equipment Testing Capabilities Twin Twin City City Fan Fan Companies, Companies, Ltd. Ltd. Worldwide Designers & Manufacturers of Air Moving Equipment TestingCapabilities Twin City Fan Companies, Ltd. In today s

More information

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the

More information

0845 0098 980 www.nicholsonsts.com

0845 0098 980 www.nicholsonsts.com 0845 0098 980 www.nicholsonsts.com ROOFTRAK The IFP is revolutionising the way we fix things to roofs. Technical Director of a leading UK roofing system manufacturer The ROOFTRAK-IFP A revolutionary solution

More information

Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS

Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow

More information

KINETICS TM. 1" and 2" Deflection Isolation Hangers Model SRH. Polyester Powder Coated Bracket and Spring Coil Self-Centering Cap Patent No.

KINETICS TM. 1 and 2 Deflection Isolation Hangers Model SRH. Polyester Powder Coated Bracket and Spring Coil Self-Centering Cap Patent No. Polyester Powder Coated Bracket and Sprg Coil Self-Centerg Cap Patent No. 5,6,426 Application Ketics Model SRH hangers are used to isolate suspended sources of both noise and vibration. Suspended mechanical

More information

ACOUSTIC ISOLATION DETAILS

ACOUSTIC ISOLATION DETAILS ACOUSTIC ISOLATION DETAILS Icelandic National Concert and Conference Center Reykjavík, Iceland January 5, 2007 Artec Report No. 7742 Artec Project No. 3760 Distribution: Stefán Hermannsson East Harbour

More information

I BEAM TRACK INSTALLATION

I BEAM TRACK INSTALLATION PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must

More information

OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd

OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd ACTOM OUTDOOR DISCONNECTORS Single Side Break (SSB) Disconnector 22-132 kv, 800-1 A, 25 ka - 3s Typical bearing assembly. Voltage range 11 kv to 132

More information

CEILING SYSTEMS. CI/SfB (35) Xy April 2006. [Between us, ideas become reality.] ULTIMA CANOPY. Data sheet. Acoustic performance meets High Design

CEILING SYSTEMS. CI/SfB (35) Xy April 2006. [Between us, ideas become reality.] ULTIMA CANOPY. Data sheet. Acoustic performance meets High Design CEILING SYSTEMS [Between us, ideas become reality.] CI/SfB (35) Xy April 2006 ULTIMA CANOPY Data sheet Acoustic performance meets High Design ULTIMA CANOPY Installation Instructions I. GENERAL 1. Product

More information

Accessories. KwikWire Clamps. KwikWire Clamp Working Loads* 78205140719 BKC100 1 /16" & 3 /32" 100 78205140723 BKC200 1 /8" & 3 /16" 50

Accessories. KwikWire Clamps. KwikWire Clamp Working Loads* 78205140719 BKC100 1 /16 & 3 /32 100 78205140723 BKC200 1 /8 & 3 /16 50 KwikWire Clamps KwikWire system replaces jack chain or ATR to support lighting, ductwork, cable tray, etc. Can be quickly installed around beams - No drilling required. Ideal for sloped ceilings - can

More information

Model 222S (Galvanized receiver optional) AURORA. 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS

Model 222S (Galvanized receiver optional) AURORA. 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS Model 222S (Galvanized receiver optional) AURORA 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS WWW.AURORAPUMP.COM AURORA 220 Series Single Stage Condensate and Boiler Feed Pumps 2 Introduction

More information

CDGRD-10. Grounding. Solutions For Comm/Data Applications

CDGRD-10. Grounding. Solutions For Comm/Data Applications CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

SIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL

SIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

ACOUSTICS. Axiom Canopy Clouds Absorption Data Sabines (average 500, 1k, 2k, 4k Hz) ACOUSTICS TESTING DATA Sound Absorption in Sabines

ACOUSTICS. Axiom Canopy Clouds Absorption Data Sabines (average 500, 1k, 2k, 4k Hz) ACOUSTICS TESTING DATA Sound Absorption in Sabines ACOUSTICS ACOUSTICS TESTING DATA Sound Absorption in Sabines SABINE DEFINITION A Sabine is a measure of the sound absorption provided by a material when installed within an architectural space. The number

More information

TCH ENGINEERING SPECIFICATIONS. Index. UL Classified V s, U s and Straight Flexible Connectors. Externally Pressurized Expansion Joints

TCH ENGINEERING SPECIFICATIONS. Index. UL Classified V s, U s and Straight Flexible Connectors. Externally Pressurized Expansion Joints Index UL Classified V s, U s and Straight Flexible Connectors Externally Pressurized Expansion Joints Flexible V and U Connectors Expansion Compensators Flexible Metal Braided Connectors PTFE Expansion

More information

758 Heavy-duty Ratchet Guy Wire Cutter

758 Heavy-duty Ratchet Guy Wire Cutter INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product

More information

SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT

SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The Work specified in this Section consists of designing, furnishing and installing factory-assembled

More information

ACCESS EQUIPMENT THE LADDER WITH THE BLUE TRIM

ACCESS EQUIPMENT THE LADDER WITH THE BLUE TRIM THE LADDER WITH THE BLUE TRIM PAINTERS AND EXTENSION TRESTLES 1 FEATURES Painters Trestles & Extension Trestles are robust, durable products. They are portable and can be erected by one person. The hard

More information

FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 413/January 2004 INSTALLING SEISMIC RESTRAINTS FOR ELECTRICAL EQUIPMENT

FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 413/January 2004 INSTALLING SEISMIC RESTRAINTS FOR ELECTRICAL EQUIPMENT FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 413/January 2004 INSTALLING SEISMIC RESTRAINTS FOR ELECTRICAL EQUIPMENT Notice: This guide was prepared by the Vibration Isolation and Seismic Control Manufacturers

More information

INC Flexi-Sorb. Versatile Flexible Easy To Install Durable Good Noise Reduction Economical. Typical Applications

INC Flexi-Sorb. Versatile Flexible Easy To Install Durable Good Noise Reduction Economical. Typical Applications INC Flexi-Sorb Noise Control Curtain System Versatile Flexible Easy To Install Durable Good Noise Reduction Economical Our Flexi-Sorb noise control curtain product line consists of flexible, durable acoustical

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

AURORA. 520 Series SINGLE STAGE SUMP PUMPS

AURORA. 520 Series SINGLE STAGE SUMP PUMPS AURORA 520 Series SINGLE STAGE SUMP PUMPS WWW.AURORAPUMP.COM AURORA 520 Series Single Stage Sump Pumps Capacities to 110 G.P.M. Heads to 40 Feet Temperatures to 180 F Introduction. Vertical extended shaft

More information

THE DESIGN OF BUILDING SERVICES FOR EARTHQUAKE RESISTANCE

THE DESIGN OF BUILDING SERVICES FOR EARTHQUAKE RESISTANCE THE DESIGN OF BUILDING SERVICES FOR EARTHQUAKE RESISTANCE Graeme J BEATTIE 1 SUMMARY The design of seismic restraints for building services equipment is often a matter that is overlooked because there

More information

Unit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008)

Unit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008) Rear Wheel/Brake/Suspension 13. Rear Wheel/Brake/Suspension Service Information 13-1 Troubleshooting 13-2 Rear Wheel 13-3 Rear Cushion 13-4 Rear Swing Arm 13-7 Service Information General Safety If the

More information

Corner Soldier Corner Soldier

Corner Soldier Corner Soldier Wall Formwork Corner Soldier Corner Soldier Designed to be used in congunction with standard soldiers, they simplify the construction of corners. By allowing ties to pass through in both direction, each

More information

Accessories for GF and RA machines

Accessories for GF and RA machines Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling

More information

AMF112 Instruction Manual

AMF112 Instruction Manual AMF112 Instruction Manual Scan here to view product demo and install videos or visit san.us/103 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520

More information

SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION 230529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.

More information

Air-Ride 227 Series. Models: RAD-227, RAD-227C, RAD-227WB, & RAS-227 Owner s Manual

Air-Ride 227 Series.  Models: RAD-227, RAD-227C, RAD-227WB, & RAS-227 Owner s Manual Air-Ride 227 Series Models: RAD-227, RAD-227C, RAD-227WB, & RAS-227 Owner s Manual RAD-227C 100% Air-Ride 34,000-48,000 lb. capacities RAD-227 10,000-25,000 lb. capacities RAD-227WB Wide Base 100% Air-Ride

More information

B Dinesh Prabhu, Asst. Professor, P E S College Engg., Mandya, KARNATAKA 1

B Dinesh Prabhu, Asst. Professor, P E S College Engg., Mandya, KARNATAKA 1 Firing Order Every engine cylinder must fire once in every cycle. This requires that for a four-stroke fourcylinder engine the ignition system must fire for every 180 degrees of crank rotation. For a sixcylinder

More information

Beginning on Friday, Jan 22, and on subsequent investigations, the following issues were identified:

Beginning on Friday, Jan 22, and on subsequent investigations, the following issues were identified: Date: 2/15/2016 Project: To: Middleton Public Library Roof Repair Pamela K. Westby Library Director Middleton Public Library 7425 Hubbard Avenue Middleton WI 53562 Pamela, Strategic Structural Design,

More information

Technical Data. Sheet Products. Titan Prop. Titan Prop. Mabey Hire Ltd. Scout Hill, Ravensthorpe, Dewsbury, West Yorkshire WF13 3EJ United Kingdom

Technical Data. Sheet Products. Titan Prop. Titan Prop. Mabey Hire Ltd. Scout Hill, Ravensthorpe, Dewsbury, West Yorkshire WF13 3EJ United Kingdom Technical Data Titan Prop Sheet Products Mabey Hire Ltd. Scout Hill, Ravensthorpe, Dewsbury, West Yorkshire WF13 3EJ United Kingdom Telephone: +44 (0) 1924 460 6 Facsimile: +44 (0) 1924 457 932 Email:

More information

Part # 11360299 73-87 C-10 Level 2 Complete Air Suspension System

Part # 11360299 73-87 C-10 Level 2 Complete Air Suspension System 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11360299 73-87 C-10 Level 2 Complete Air Suspension System Front Components: 1 11330999 Front CoolRide

More information

SELF-STEERING AXLE TABLE OF CONTENTS

SELF-STEERING AXLE TABLE OF CONTENTS SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -

More information

SaniTite HP Sanitary Sewer Pipe 12 60

SaniTite HP Sanitary Sewer Pipe 12 60 SaniTite HP Sanitary Sewer Pipe 12 60 TM The Most Advanced Name in Water Management Solutions Sanitite HP pipe 12 60 FOR SANITARY SEWER Meets ASTM F2736 and F2764 SaniTite HP (High Performance) couples

More information

ACOUSTIC ISOLATION DETAILS

ACOUSTIC ISOLATION DETAILS ACOUSTIC ISOLATION DETAILS Icelandic National Concert and Conference Center Reykjavík, Iceland January 5, 2007 Artec Report No. 7742 Artec Project No. 3760 Distribution: Stefán Hermannsson East Harbour

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

before tightening the bolts. This will help eliminate the potential for any interference between the flywheel housing and the oil pan.

before tightening the bolts. This will help eliminate the potential for any interference between the flywheel housing and the oil pan. SERIES 60 SERVICE MANUAL before tightening the bolts. This will help eliminate the potential for any interference between the flywheel housing and the oil pan. 1. Drain Plug 6. Bolt 2. Nut 7. Plug 3. Isolator

More information

OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610)

OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) The Heart of Your Process OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV OHVL OHV/OHVL Sales Presentation slide

More information

Seismic Installation for Attic Storage System

Seismic Installation for Attic Storage System Your Performance Partner Seismic Installation for Storage System CONTENTS SSafety Precautions................................. 2 Required Tools..................................... 2 Parts and Fastener

More information

Cooktop Low-Profile Ventilation Hoods

Cooktop Low-Profile Ventilation Hoods INSTALLATION GUIDE Cooktop Low-Profile Ventilation Hoods Contents Wolf Cooktop Low-Profile Ventilation Hoods........ 3 Cooktop Low-Profile Hood Specifications.......... 4 Cooktop Low-Profile Hood Installation............

More information

Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment

Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment By Patty Brown & Mark van Ginhoven November 13, 2009 1 CA 2009 Fluor Corporation. All Rights Reserved. Topics Covered Introduction Nozzle

More information

Since the Steel Joist Institute

Since the Steel Joist Institute SELECTING and SPECIFYING Wesley B. Myers, P.E. An insider s guide to selecting and specifying K-series, LH, DLH-series joists and joist girders Since the Steel Joist Institute adopted the first standard

More information

Installation Manual Box Rail Series

Installation Manual Box Rail Series Installation Manual Box Rail Series INTRODUCTION THANK YOU for purchasing Real Sliding Hardware. Our hardware will add a stunning accent to your living environment and maximize its space. It is made with

More information

METAL-TURNING LATHE Built from Stock Parts

METAL-TURNING LATHE Built from Stock Parts by Frank Beatty USING STANDARD PARTS and stock materials that are available almost anywhere, you can build this metalworking lathe with only a few tools. Because of simplification of the assembly in order

More information

K17.11 DOOR BOLTS K17 DOORS 01.09.2013

K17.11 DOOR BOLTS K17 DOORS 01.09.2013 K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.

More information

Technical Information & Installation Instructions

Technical Information & Installation Instructions Technical Information & Installation Instructions For Thrust Bearings HDL 680, HDL 700(HT) & HDL 780(HT) CV shafts CV42 & CV60 Svenska Uni-Cardan AB P. O. Box 3100, SE 127 03 Skärholmen SWEDEN e-mail:

More information

TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING

TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING TORONTO TRANSPORTATION January 2012 TS 813 GROUNDING AND BONDING TABLE OF CONTENTS 1. DRAWINGS TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET

More information

2007 Hummer H3. 2007 SUSPENSION Rear Suspension - H3. Fastener Tightening Specifications Specification Application

2007 Hummer H3. 2007 SUSPENSION Rear Suspension - H3. Fastener Tightening Specifications Specification Application 2007 SUSPENSION Rear Suspension - H3 SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Specification Application Metric English Leaf Spring to Front Bracket Nut 125 N.m

More information

ICC-ES Evaluation Report

ICC-ES Evaluation Report ICC-ES Evaluation Report ESR-2369 Reissued May 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council

More information

1997 Uniform Administrative Code Amendment for Earthen Material and Straw Bale Structures Tucson/Pima County, Arizona

1997 Uniform Administrative Code Amendment for Earthen Material and Straw Bale Structures Tucson/Pima County, Arizona for Earthen Material and Straw Bale Structures SECTION 70 - GENERAL "APPENDIX CHAPTER 7 - EARTHEN MATERIAL STRUCTURES 70. Purpose. The purpose of this chapter is to establish minimum standards of safety

More information

Roof Curbs, Extensions and Equipment Supports

Roof Curbs, Extensions and Equipment Supports Roof s, Extensions and Equipment Supports December 2012 Roof Page s, Header Extensions and Equipment Supports Table of Contents Model GPI Standard and Optional Construction Features... 3 Model Number Code....

More information

Cabinet V800 V800 CABINETS

Cabinet V800 V800 CABINETS V800 Cabinet Siemon s V800 cabinets provide a robust, cost-effective enclosure solution that provides valuable Zero-U space on each side of the equipment rails for cable management, PDU mounting or connectivity

More information

AMF112 (6904-002010 <00>) 13mm (1/2 in.)

AMF112 (6904-002010 <00>) 13mm (1/2 in.) AMF112 () Concrete Wood 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe,

More information

Flamco Stainless steel mountings

Flamco Stainless steel mountings S TA I N L E S S S T E E L M O U N T I N G S 9 Flamco Stainless steel mountings BRS-A BSF - SS RAIL R - SS GP - SS Edition 2007 / UK Stainless steel mountings Flamco offers the best attachment options

More information

Reel Stands and Spindles

Reel Stands and Spindles INSTRUCTION MANUAL 687 683 656 647 684 657 Reel Stands and Spindles Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this

More information

Embedded Parts Introduction - Anchors

Embedded Parts Introduction - Anchors In the plant construction or process plants such as chemical, petrochemical, gas or power plants various disciplines are brought into contact and built on each other. Civil, mechanical, electro technical

More information

Knürr DCM. Knürr DCM. 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1

Knürr DCM. Knürr DCM. 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1 Knürr DCM 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1 Knürr DCM conquers the world Standardization in the data center begins with the Knürr DCM! The Knürr DCM is the modular building block

More information

Prefabricated FRP Lift Station Sample Specifications Section 1 General

Prefabricated FRP Lift Station Sample Specifications Section 1 General Section 1 General 1. Description 1.1 Scope of Work: Contractor shall furnish all labor, materials, equipment and performance of all work necessary or incidental to furnish and install a simplex/duplex

More information

The baying system PS 4000

The baying system PS 4000 The baying system PS 000 The baying system PS 000 Design and technology customised to meet your needs Top quality and economy characterise the PS system. The profile is one of the core features of our

More information

METHOD STATEMENT FOR INSTALLATION OF CABLE TRAY/TRUNKING/LADDER

METHOD STATEMENT FOR INSTALLATION OF CABLE TRAY/TRUNKING/LADDER Page 1 of 6 FOR INSTALLATION OF CABLE TRAY/TRUNKING/LADDER 0 Issued for Review & Comments Rev. Date Description Eng. A.H Prepared by Checked by Approved by Page 2 of 6 REVISION CONTROL SHEET REV. NO. DATE

More information

SELECTION, APPLICATION AND MAINTENANCE

SELECTION, APPLICATION AND MAINTENANCE DIESEL PROTECTION SYSTEMS D-Series Engine Automatic Overspeed Shut Down Valves (Spindle Types with Air Pressure and Manual Shut Down Options) SELECTION, APPLICATION AND MAINTENANCE Valve Numbers D92-AP

More information

Knürr Smaract. Knürr Smaract. CompactRack

Knürr Smaract. Knürr Smaract. CompactRack CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.

More information

Bass Link, Australia. >> Oceania s most experienced and versatile supplier of quality, engineered overhead line structures.

Bass Link, Australia. >> Oceania s most experienced and versatile supplier of quality, engineered overhead line structures. Utility Poles Bass Link, Australia >> Oceania s most experienced and versatile supplier of quality, engineered overhead line structures. At INGAL EPS, we ve being designing and producing utility poles

More information

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT GENERAL INFORMATION 1.1 This section applies to piping systems for chilled water, hot water, condenser water, steam, condensate return, fuel oil, refrigerant

More information