Setting the standard PRODUCTION & TEST. Gen3 Systems MANUFACTURES & SUPPLIES ELECTRONIC ASSEMBLY & TEST EQUIPMENT. Contaminometer CM+ NANO-COAT
|
|
- Aubrey Barton
- 7 years ago
- Views:
Transcription
1 Gen3 Systems MANUFACTURES & SUPPLIES ELECTRONIC ASSEMBLY & TEST EQUIPMENT Setting the standard Gen3 Systems is a specialist manufacturer of award-winning industry standard benchmark test and measurement equipment used to improve electronic circuit reliability. We also design and manufacture conformal coating process equipment both bench-top and inline systems and offer a range of test services. We provide award-winning contributions to the standards development bodies IEC (International Electro- Technical Commission), ISO (International Standards Organisation) and IPC (Association Connecting Electronics Industries - USA). We work extensively with the British National Physical Laboratory (NPL) through whose science research, ELECTRONICS we employ and evolve new measurement techniques and test equipment. PRODUCTION & TEST Contaminometer CM+ NANO-COAT Gensonic Solder Saver MUST AutoSIR2 AutoCAF2 Z-Check
2 Gen3 Systems MANUFACTURES & SUPPLIES ELECTRONIC ASSEMBLY & TEST EQUIPMENT Setting the standard Gen3 Systems is a specialist manufacturer of award-winning industry standard benchmark test and measurement equipment used to improve electronic circuit reliability. We also design and manufacture conformal coating process equipment both bench-top and inline systems and offer a range of test services. We provide award-winning contributions to the standards development bodies IEC (International Electro- Technical Commission), ISO (International Standards Organisation) and IPC (Association Connecting Electronics Industries - USA). We work extensively with the British National Physical Laboratory (NPL) through whose science research, we employ and evolve new measurement techniques and test equipment. Contaminometer CM+ NANO-COAT Gensonic Solder Saver MUST AutoSIR2 AutoCAF2 Z-Check
3 Gen3 Systems... Gen3 Systems is a financially independent, 3rd generation, family owned business that has its roots going back 45 years. Originally a heavy engineering based business, it was the family s 2nd generation that diversified it into the then fast growing electronics business, establishing Concoat in Concoat, that was a familiar name in Europe, Asia and much of North America, was sold in 2005 but its equipment business was retained to become Gen3 Systems. Gen3 Systems is a specialist manufacturer of test and measurement equipment used to predict the reliability of electronic circuits and systems. This began when we acquired Multicore SPCID business from Henkel in We continue to design and manufacture conformal coating process equipment of both in-line and bench-top formats as we have done for almost 40 years. To help develop our Distribution Business in the UK market, in 2008 we acquired Process Support Products (PSP). This opened opportunities in selective soldering, AOI, and cleaning system applications. These further expanded into robotic dispensing and coating systems and, most recently, into Micro-Electronics Systems. For over 30 years, Gen3 Systems has worked closely with the National Physical Laboratory (NPL). This unique relationship has helped in our development of our various test systems as well as helping us define new measurement techniques and equipment. Our combined knowledge and experience is also offered to provide training and advice to customers and a comprehensive in-house testing service for solderability, SIR and cleanliness evaluations....at your service
4 Production Ionic Contamination Process Control Contaminometer CM+ Accurate measurement of ionic contamination in accordance with international specifications from IPC and IEC. For over 30 years the Benchmark for Ionic Contamination Testing. PICT Process Ionic Contamination Testing the new process control metric introduced by Gen3 Systems. 6 test systems for optimum test capability: CM11+ CM22+ CM33+ CM33L+ CM60 Unique Bare Board Tester: CM-BBT Dip & Spray Coating Systems NANO-COAT Ultra Precision Dip Coating Systems that can apply coatings from <60nm to >50μm at >3% accuracy. A variable speed controlled oleo-pneumatic system ensures smooth judder-free motion during the immersion and withdrawal strokes. Nano-Coat Dip Systems are totally safe to use with all coating materials including flammable liquids, for the very widest range of applications. Systems for the laboratory to large-scale in-line coating and curing systems. Stencil Cleaning Gensonic Our Gensonic Stencil Cleaning system uses a 40kHz on-contact ultrasonic transducer for high efficiency cleaning of stencil apertures. The Gensonic can be used either in conjunction with our Stencil Cleaning Centres or portable enough to be taken directly to the printer. Designed, Developed and Manufactured by Gen3 Systems in the UK at a price you won t believe. Solder Dross Recovery Solder Saver The Solder-Saver offers companies who use wave soldering the opportunity to instantly recycle dross created in the wave solder pot, thereby saving up to 50% in new solder bar purchases. It can be used with either leaded, lead free, or unleaded alloys. Environment and user friendly it has a very fast pay-back / ROI. Wizard Thermal Profiling ΔT Delta T - Wizard Thermal Profiling - a 5 channel temperature logger and user friendly software. Capable - Simple - Adaptable - Flexible - Accurate - Economic
5 Test Solderability MUST Solderability Testing, your first line of defence against counterfeit components. The industry benchmark for solderability testing, the MUST is capable of measuring down to 0.001mN making it THE most accurate and comprehensively equipped test system of its type in the world. It performs solderability testing in accordance with all major international standards and is supplied with everything necessary for all forms of solderability tests. SIR / ECM AutoSIR2 Automated precision Surface Insulation Resistance (SIR) measurement. AutoSIR2 has set the standard in SIR testing for more than 20 years. It is in use with most leading research and commercial laboratories around the world as well as many major electronic manufacturing groups. Testing up to 256 sites at selectable intervals, test and measurement voltages, with a measurement range of 10 6 Ω to Ω CAF AutoCAF2 Measuring the influences of sub-surface electro-chemical reactions in printed circuit boards under conditions of high humidity and temperature to all recognised standards. Testing up to 256 sites at selectable intervals, test and measurement voltages, with a measurement range of 10 6 Ω to Ω Test Voltages: 5v, 10v, ±50v and ±100v. Optional external power supply selectable up to 800v. Solder Paste Inspection Z-Check Non-contact solder paste measuring systems, designed to provide accurate pad specific measurement of solder paste deposits, adhesives and component placement. Z-Check 3D - 3D Automatic Solder Paste Measuring System Z-Check Non Contact Solder Paste Measuring System with automatic positioning stage and laser alignment Z-Check Non Contact Solder Paste Measuring System with laser pointer Z-Check Manual Solder Paste Measuring System
6 Distributor: A BRITISH MANUFACTURER Gen3 Systems Limited B2, Armstrong Mall, Southwood Business Park, Farnborough, Hampshire, GU14 0NR. UK Telephone: +44 (0) Fax: +44 (0) sales@gen3systems.com E&OE
Auditing Contract Manufacturing Processes
Auditing Contract Manufacturing Processes Greg Caswell and Cheryl Tulkoff Introduction DfR has investigated multiple situations where an OEM is experiencing quality issues. In some cases, the problem occurs
More informationTechnical Info Sheet. Ionic contamination testing in a no-clean soldering process. Scope
Scope This document provides information about ionic contamination testing and its relevance in a no-clean. Also so-called C3 testing and ROSE (Resistivity of Solvent Extract) testing are forms of ionic
More informationHow to Avoid Conductive Anodic Filaments (CAF)
How to Avoid Conductive Anodic Filaments (CAF) Ling Zou & Chris Hunt 22 January 20 1 Your Delegate Webinar Control Panel Open and close your panel Full screen view Raise hand for Q&A at the end Submit
More informationLogistics. EMS manufacturing solutions can be supplied in any format to suit a customer s requirements, including;
Vision EMS (Electronic Manufacturing Solutions Ltd,) offers a complete range of manufacturing solutions for the CEM electronics marketplace. EMS is focused on the provision of fast, cost effective solutions
More informationMiniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M
Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection
More informationPCB Quality Inspection. Student Manual
PCB Quality Inspection Student Manual Unit 2: Inspection Overview Section 2.1: Purpose of Inspection What Is The Purpose of Inspection? There are 2 reasons why Inspection is performed: o To verify the
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationUltraprint 2000 HiE. Ultraprint 2000 HiE Features MODULAR DESIGN ENSURES SUPERIOR ADAPTABILITY
Ultraprint 2000 HiE Since its introduction, the Ultraprint 2000 HiE has become the industry choice for high performance, reliable automated stencil printing. A key factor in its immediate worldwide acceptance
More informationPIN IN PASTE APPLICATION NOTE. www.littelfuse.com
PIN IN PASTE APPLICATION NOTE 042106 technical expertise and application leadership, we proudly introduce the INTRODUCTION The Pin in Paste method, also called through-hole reflow technology, has become
More informationIPC-SM-840C. Qualification and Performance of Permanent Solder Mask IPC-SM-840C. The Institute for. Interconnecting. and Packaging Electronic Circuits
The Institute for Interconnecting and Packaging Electronic Circuits Qualification and Performance of Permanent Solder Mask January 1996 A standard developed by the Institute for Interconnecting and Packaging
More informationA and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058
A and M Electronics Contract Manufacturing Circuit Board Assembly 25018 Avenue Kearny Valencia, Ca. 91355 (661) 257-3680 or (800) 923-3058 "When Quality Counts, Choose A&M Electronics" SMT, BGA, & Through
More informationElectronic Board Assembly
Electronic Board Assembly ERNI Systems Technology Systems Solutions - a one stop shop - www.erni.com Contents ERNI Systems Technology Soldering Technologies SMT soldering THR soldering THT soldering -
More informationFlexible Circuits and Interconnection Solutions
Flexible Circuits and Interconnection Solutions Introduction Our "Mission" is "to demonstrate through our unrivalled capability and service that Teknoflex sets the standard in the design, manufacture and
More informationWCAP-CSGP Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor
More informationPrototype to Full Production and Box Build. Delivering a superior end product in rapid response time.
DITEK Manufacturing Services Prototype to Full Production and Box Build ABOUT DITEK MANUFACTURING SERVICES Located at 1720 Starkey Rd. Largo, FL 33771 50,000 sq ft Facility with 27,000 sq ft of Manufacturing
More informationElectrical tests on PCB insulation materials and investigation of influence of solder fillets geometry on partial discharge
, Firenze, Italy Electrical tests on PCB insulation materials and investigation of influence of solder fillets geometry on partial discharge A. Bulletti, L. Capineri B. Dunn ESTEC Material and Process
More informationInvestigation of Components Attachment onto Low Temperature Flex Circuit
Investigation of Components Attachment onto Low Temperature Flex Circuit July 2013 Q. Chu, N. Ghalib, H. Ly Agenda Introduction to MIRA Initiative MIRA Manufacturing Platforms Areas of Development Multiphase
More informationHow to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
More informationPolymer Termination. Mechanical Cracking 2. The reason for polymer termination. What is Polymer Termination? 3
Polymer Termination An alternative termination material specifically designed to absorb greater levels of mechanical stress thereby reducing capacitor failures associated with mechanical cracking Mechanical
More informationYour Product. - Our Key Competence. Moulding and Encapsulation Cable Assembly Customizing Fiber Cable Assembly Assembly Projects
Your Product - Our Key Competence Moulding and Encapsulation Cable Assembly Customizing Fiber Cable Assembly Assembly Projects Contents The Best Solution for You................... 3 Cable Assembly.........................
More informationLead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc.
Lead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc. Abstract The technology for connecting lead and magnet wires for electric motors and electro mechanical devices
More informationCleanliness of Electronic PCB Assemblies Leads to Medical Device Reliability
Cleanliness of Electronic PCB Assemblies Leads to Medical Device Reliability by Mo Ohady and David Estes, Digicom Electronics, Oakland, CA Overcoming the Potential for Failures Component manufacturers
More informationEdition 2012-032 Published by Infineon Technologies AG 81726 Munich, Germany 2013 Infineon Technologies AG All Rights Reserved.
Recommendations for Printed Circuit Board Assembly of Infineon Laminate Packages Additional Information DS1 2012-03 Edition 2012-032 Published by Infineon Technologies AG 81726 Munich, Germany 2013 Infineon
More informationTechnical Spotlight. The Use of Ion Chromatography in the Printed Circuit Board Industry
The Use of Ion Chromatography in the Printed Circuit Board Industry Keith M Sellers Senior Scientist Trace Laboratories East 5 North Park Dr. Hunt Valley, MD 21030 (410) 584-9099 ksellers@tracelabs.com
More informationBob Willis leadfreesoldering.com
Assembly of Flexible Circuits with Lead-Free Solder Alloy Bob Willis leadfreesoldering.com Introduction to Lead-Free Assembly Video Clips Component www.bobwillis.co.uk/lead/videos/components.rm Printed
More informationFraunhofer ISIT, Itzehoe 14. Juni 2005. Fraunhofer Institut Siliziumtechnologie (ISIT)
Research and Development centre for Microelectronics and Microsystems Applied Research, Development and Production for Industry ISIT applies an ISO 9001:2000 certified quality management system. Certificate
More informationNordson EFD Solutions: Fluid Positioning & Precision Dispensing in Mobile Device and Wearables Manufacturing
Nordson EFD Solutions: Fluid Positioning & Precision Dispensing in Mobile Device and Wearables Manufacturing Introduction As consumers demand thinner, lighter, more sophisticated and durable mobile devices
More informationSiemens Chemnitz Siemens AG 2010. Alle Rechte vorbehalten.
Siemens Chemnitz Seite 1 ACOD Leipzig, 18th Feb 2010 Organization: R&D and Production Research & Development CNCs NC components Motion control PLC-Components Distributed I/Os Peripheral modules Power Electronics
More informationTAILOR MADE TECHNOLOGY
TAILOR MADE TECHNOLOGY ABOUT US WE PROVIDE A COMPLETE END TO END MANUFACTURING SERVICE Darlington EMS is a specialist supplier of electronic manufacturing services. We provide a complete end to end manufacturing
More informationJOINT INDUSTRY STANDARD
JOINT INDUSTRY STANDARD IPC J-STD-003C Amendment 1 April 2014 Solderability Tests for Printed Boards Amendment 1 The Principles of Standardization Notice In May 1995 the IPC s Technical Activities Executive
More informationManufacturing Capabilities
Manufacturing Capabilities Sealite is the world s fastest growing manufacturer of marine aids to navigation. We employ leading engineers to create innovative products to service the needs of our customers
More informationThe Alphabet soup of IPC Specifications. 340 Raleigh Street Holly Springs, NC 27540
The Alphabet soup of IPC Specifications 340 Raleigh Street Holly Springs, NC 27540 http://www.circuittechnology.com (919) 552 3434 About the IPC IPC-the electronics industry standard Founded in 1957 as
More informationInnovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions
Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions Innovative Wafer & Interconnect Technologies Outline Low cost RFID Tags & Labels Standard applications and
More informationA comprehensive range
The professionals in coated pipelines A comprehensive range We have reduced our machine set-up times to offer a fast turnaround for fusion bonded epoxy, multi-layer and internal pipe coatings. All coating
More informationRMS Power. The Meaning of Average
RMS Power Discussion in the rec.radio.amateur.homebrew newsgroup showed a widespread misunderstanding of the meaning and importance of RMS and average values of voltage, current, and power. So I ve put
More informationOverview. Building Partnerships for Tomorrow... INTRODUCTION. Houston
Overview INTRODUCTION Established in 1995, Suntronic is a diversified Electronic Manufacturing Service provider supporting the oil and gas, medical devices, industrial controls, semiconductor, military,
More informationMANUFACTURING INNOVATION
MANUFACTURING INNOVATION CORPORATE HISTORY Founded in 1974, as Dynamic Circuits we mainly served customers with production volume demands. We soon found that the market also had strong requirements for
More informationPrinted Circuits. Danilo Manstretta. microlab.unipv.it/ danilo.manstretta@unipv.it. AA 2012/2013 Lezioni di Tecnologie e Materiali per l Elettronica
Lezioni di Tecnologie e Materiali per l Elettronica Printed Circuits Danilo Manstretta microlab.unipv.it/ danilo.manstretta@unipv.it Printed Circuits Printed Circuits Materials Technological steps Production
More informationKeysight Technologies Quickly Identify and Characterize Thermal Measurement Points
Keysight Technologies Quickly Identify and Characterize Thermal Measurement Points Application Brief Test Challenges: Temperature characterization of a prototype Long-term building inspection 02 Keysight
More informationPCB Board Design. PCB boards. What is a PCB board
PCB Board Design Babak Kia Adjunct Professor Boston University College of Engineering Email: bkia -at- bu.edu ENG SC757 - Advanced Microprocessor Design PCB boards What is a PCB board Printed Circuit Boards
More informationMachine Standard Configuration Standard Configuration Machine Alignment Capability Process Alignment Capability Core Cycle Time Maximum Print Area Printer Construction ISCAN TM Machine Control Operating
More informationA thermal cure is then applied to obtain final properties of the paint film.
CHARACTERIZATION OF OXIDE LAYERS FORMED ON ALUMINUM ALLOYS DURING NEW PPG ELECTRODEPOSITED STRUCTURAL PAINT ECODESIGN - GRANT AGREEMENT N 267285 Dr Marion Collinet Ecole Nationale Supérieure de Chimie
More informationLO5: Understand commercial circuit manufacture
Unit 6: Circuit simulation and manufacture LO5: Understand commercial circuit manufacture Commercial component and PCB types Instructions and answers for teachers These instructions should accompany the
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More informationAuditing a Printed Circuit Board Fabrication Facility Greg Caswell
Auditing a Printed Circuit Board Fabrication Facility Greg Caswell Introduction DfR is often requested to audit the PCB fabrication process of a customer s supplier. Understanding the process variations
More informationKemet DIAMOND PRODUCTS
Kemet DIAMOND PRODUCTS Kemet Diamond Products Since 1938, Kemet has been at the forefront of precision polishing technology, producing quality diamond pastes, slurries and composite lapping/polishing materials
More informationIn-line 3D Sputtering Coating System. Fully automated. pst line
In-line 3D Sputtering Coating System Fully automated pst line pst line In-line 3D Sputtering Coating System Fully in-line automated base coat, 3D sputtering and top coat system Ultra efficient varnishing
More informationThermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
More informationFlex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
More informationSMD Power Elements Design Guide. 50 A SMD Technology Small Size High Current
SMD Power Elements Design Guide 50 A SMD Technology Small Size High Current Contents Surface Mount Technology & Assembly Surface Pad Geometry & Stencil Technical Data Qualification Reliability Test 2 www.we-online.com
More informationTAIYO PSR-4000MP LIQUID PHOTOIMAGEABLE SOLDER MASK
TAIYO PSR-4000MP LIQUID PHOTOIMAGEABLE SOLDER MASK Screen or Spray Application Dark Green, Matte Finish Excellent Solder Ball Resistance Resistance to No-Clean Flux Residue Wide Processing Window Fine
More informationHow do you create a RoHS Compliancy-Lead-free Roadmap?
How do you create a RoHS Compliancy-Lead-free Roadmap? When a company begins the transition to lead-free it impacts the whole organization. The cost of transition will vary and depends on the number of
More informationCustomized solutions Rigid, flexible and rigid-flexible printed circuit boards of the very highest quality
printed circuitboards Customized solutions Rigid, flexible and rigid-flexible printed circuit boards of the very highest quality Competent. Innovative. Tailor-made. The quality of the thinking determines
More informationBGA - Ball Grid Array Inspection Workshop. Bob Willis leadfreesoldering.com
BGA - Ball Grid Array Inspection Workshop Bob Willis leadfreesoldering.com Mixed Technology Assembly Processes Adhesive Dispensing Component Placement Adhesive Curing Turn Boar Over Conventional Insertion
More information1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.
Library of Congress Preservation Directorate Specification Number 700 704 09 Specifications for Pressure Sensitive Adhesive Labels For Application to Single Paper Sheets and Text Pages of Bound Books For
More informationManufacturing Capability profile
Manufacturing Capability profile MANUFACTURING Our capabilities and our people BAE Systems offers the Australian Defence Force (ADF) and security customers total capability across the defence and security
More informationSTRAIN GAGE INSTALLATION HOLE DRILLING
Via Delle Calandre 63 50041 Calenzano (Florence) Italy Tel: +39.055.8826-302 Fax: -303 www.sintechnology.com info@sintechnology.com STRAIN GAGE INSTALLATION HOLE DRILLING How to install strain gages for
More informationINTEGRATED CIRCUITS DATA SHEET. SAA1064 4-digit LED-driver with I 2 C-Bus interface. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET 4-digit LED-driver with I 2 C-Bus interface File under Integrated Circuits, IC01 February 1991 GENERAL DESCRIPTION The LED-driver is a bipolar integrated circuit made in
More informationhandbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
More informationPCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices
Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices Introduction There is an industry-wide trend towards using the smallest package possible for a given pin count. This is driven primarily
More informationGood Manufacturing Practices for the Production of Packaging Inks formulated for use on the non food contact surfaces of food packaging and articles
Good Manufacturing Practices for the Production of Packaging Inks formulated for use on the non food contact surfaces of food packaging and articles intended to come into contact with food October 2005
More informationWhite Paper Product Quality Fujitsu ESPRIMO PCs, Fujitsu CELSIUS workstations, Fujitsu FUTRO thin clients
White Paper Product Quality Fujitsu ESPRIMO PCs, Fujitsu CELSIUS workstations, Fujitsu FUTRO thin clients Quality from beginning to end is the principle that guides Fujitsu from the design and planning
More informationQ&A. Contract Manufacturing Q&A. Q&A for those involved in Contract Manufacturing using Nelco Electronic Materials
Q&A Q&A for those involved in Contract Manufacturing using Nelco Electronic Materials 1. Do Nelco laminates have any discoloration effects or staining issues after multiple high temperature exposures?
More informationTEMPERATURE SENSORS AND PROBES FOR BIO-MEDICAL APPLICATIONS
TEMPERATURE SENSORS AND PROBES FOR BIO-MEDICAL APPLICATIONS www.meas-spec.com Introduction Measurement Specialties is the market leader in critical temperature measurement and is a leading provider of
More informationSURFACE INSULATION RESISTANCE TESTING OF SOLDERING PASTES AND FLUXES
SURFACE INSULATION RESISTANCE TESTING OF SOLDERING PASTES AND FLUXES Renee Michalkiewicz, Janet Green, and Scott Opperhauser Trace Laboratories East Hunt Valley, Maryland, USA ABSTRACT The broadening use
More informationMomentum Series MPM. Printing System. A cost-effective, high-performance printing solution featuring innovative technology and outstanding capability.
A proven high-performance printing platform - flexible, configurable, and easy to use, with speed and accuracy unmatched by any other printer in its class. MPM Momentum Series Printing System A cost-effective,
More information8-bit Atmel Microcontrollers. Application Note. Atmel AVR211: Wafer Level Chip Scale Packages
Atmel AVR211: Wafer Level Chip Scale Packages Features Allows integration using the smallest possible form factor Packaged devices are practically the same size as the die Small footprint and package height
More informationSELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
More information17 IMPLEMENTATION OF LEAD-FREE SOLDERING TECHNOLOGY. Eva Kotrčová České Vysoké Učení Technické Fakulta Elektrotechnická Katedra Elektrotechnologie
17 IMPLEMENTATION OF LEAD-FREE SOLDERING TECHNOLOGY Eva Kotrčová České Vysoké Učení Technické Fakulta Elektrotechnická Katedra Elektrotechnologie 1. Introduction Lead is the toxic heavy metal which is
More informationMCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision www.vishay.com. Precision Thin Film Chip Resistors
Precision Thin Film Chip Resistors FEATURES Rated dissipation P 70 up to 0.4 W for size 1206 AEC-Q200 qualified Approved to EN 140401-801 Superior temperature cycling robustness Sulfur resistance verified
More information3M Thermally Conductive Adhesive Transfer Tapes
Technical Data July 215 3M Thermally Conductive Adhesive Transfer Tapes 885 881 8815 882 Product Description 885, 881, 8815 and 882 are designed to provide a preferential heat-transfer path between heat-generating
More informationli-ion Polymer Battery Specification
Customer: li-ion Polymer Battery Specification MODEL: GMB042035 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved.
More informationMADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
More informationWELCOME TO VIASION. www.viasion.com
WELCOME TO VIASION www.viasion.com BRIEF INTRODUCTION Viasion Technology Co., Ltd is a professional Printed Circuit Board (PCB) manufacturer in China. With around 1500 employees totally in 2 different
More informationTECHNICAL DATASHEET. Ronascreen TM SPSR 5900 SP / HL-3
TECHNICAL DATASHEET Ronascreen TM SPSR 5900 SP / HL-3 Aqueous Developable PHOTOIMAGEABLE SOLDERMASK PRODUCT DESCRIPTION SPSR 5900 SP / HL-3 is a negative-working, photoimageable soldermask for the production
More informationThe table below lists the symbols used on the Clamp and/or in this manual. Important Information. See manual.
i800 AC Current Clamp Instruction Sheet Introduction The i800 AC Current Clamp, the Clamp, has been designed for use with multimeters, recorders, power analyzers, safety testers, etc., for accurate non-intrusive
More informationCompany Profile 2014 October 2014
Company Profile 2014 October 2014 Company - Vision We are an independent and international full range Electronic Manufacturing Service (EMS) We provide innovative solutions and as an efficient performing
More informationFor the modifications listed below, the Qualification Approval tests in IEC 61215 and IEC 61646, shall be used as a guideline by the assessor:
Product or Process Modifications Requiring Limited CBTL Retesting to Maintain Certification This document sets forth a uniform approach to maintain the certification of products that have, or will, undergo
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More informationSpecification for Electroless Nickel/ Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Circuit Boards
Specification for Electroless Nickel/ Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Circuit Boards Developed by the Plating Processes Subcommittee (4-14) of the Fabrication Processes
More informationPresentation of the France Transfo factories
Presentation of the France Transfo factories France Transfo's internationally recognised and highly esteemed expertise is today exported to more than 80 countries throughout the world. Over the past 15
More informationHandling and Processing Details for Ceramic LEDs Application Note
Handling and Processing Details for Ceramic LEDs Application Note Abstract This application note provides information about the recommended handling and processing of ceramic LEDs from OSRAM Opto Semiconductors.
More informationDRIVING COST OUT OF YOUR DESIGNS THROUGH YOUR PCB FABRICATOR S EYES!
4/3/2013 S THROUGH YOUR PCB FABRICATOR S EYES! Brett McCoy Eagle Electronics Schaumburg IL. New England Design and Manufacturing Tech Conference Brett McCoy: Vice President / Director of Sales Circuit
More informationPolyimide labels for Printed Circuit Boards
Polyimide labels for Printed Circuit Boards The right match for any PCB labelling application Labels on Printed Circuit Boards Matching product performance with application needs Printed Circuit Boards
More information3 Thermal Transfer Acrylate Label Material 3921
3 Thermal Transfer Acrylate Label Material Technical Data April, 2008 Product Description 3M Thermal Transfer Acrylate Label Material consists of a non-topcoated acrylate facestock designed for thermal
More informationGlobal Asset Tagging & Identification System for Hydraulic Hose Assemblies
Parker Tracking System (PTS) White Paper No.101 Global Asset Tagging & Identification System for Hydraulic Hose Assemblies William E. Sayavich, Business Development Manager Parker Hannifin Corporation,
More informationTAIYO PSR-4000 AUS703
TAIYO PSR-4000 AUS703 LIQUID PHOTOIMAGEABLE SOLDER MASK Designed for Flip Chip Packaging Applications Halogen-Free (300ppm) Excellent Thermal and Crack Resistance Low Water Absorption RoHS Compliant Excellent
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62885-3 Edition 1.0 2014-12 colour inside Surface cleaning appliances Part 3: Wet carpet cleaning appliances Methods for measuring the performance INTERNATIONAL ELECTROTECHNICAL
More informationReliance. Precision Limited. Electro-Mechanical, Opto-Mechanical Assemblies and Specialist Geared Components
Reliance R G Precision Limited Electro-Mechanical, Opto-Mechanical Assemblies and Specialist Geared Components 2 Reliance Precision Limited, Huddersfield Company Introduction A specialist engineering company
More informationDesign qualification and type approval of PV modules
Design qualification and type approval of PV modules TÜV Immissionsschutz und Energiesysteme GmbH Test Centre for Energy technologies May 2003 Design qualification and type approval of PV-modules in accordance
More informationAutomatic Defluxing Systems. Stencil Cleaning Systems. Ionic Contamination (Cleanliness) Testers. Cleaning Chemicals
Automatic Defluxing Systems Stencil Cleaning Systems Ionic Contamination (Cleanliness) Testers Cleaning Chemicals AQUEOUS TECHNOLOGIES CORPORATION 9055 Rancho Park Court Rancho Cucamonga, CA 91730 USA
More informationCONTROLLING THE ASSEMBLY PROCESS WITH THE USE OF SPC
CONTROLLING THE ASSEMBLY PROCESS WITH THE USE OF SPC William Beair, Alton Moore, and Eric Gilley Raytheon Company McKinney, TX, USA ABSTRACT With increasing deployment of both micro BGA s, 0201discreet
More informationUltrasonic Cleaning Lines for Aerospace Applications
Aerospace Ultrasonic Cleaning Lines for Aerospace Applications Cleaning of engine components MRO Cleaning before vacuum coating Precleaning, intermediate cleaning and final cleaning NDT/FPT www.elma-ultrasonic.com
More informationINDUSTRIAL SITE SERVICES. sharing responsibility
INDUSTRIAL SITE SERVICES sharing responsibility safe, professional industrial site services Veolia Environmental Services is an international, market-leading waste management company providing a comprehensive
More informationAssembly and Cleaning. Prototype FDC Wire Boards
Assembly and Cleaning Prototype FDC Wire Boards Fernando J. Barbosa, Kim S. Shinault, Michelle Brisiel 23 January 2009 1. Introduction Particle detectors employ printed circuit boards (PCB) to assemble
More informationRG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
More informationTroubleshooting the Stencil Printing Process
Troubleshooting the Stencil Printing Process Chrys Shea, Shea Engineering Services Sponsored by: Topics Printing Solder paste properties Key elements of the process Inspecting Phase Shift Interferometry
More information