Alchemia SA Capital Group

Transcription

1 Alchemia SA Capital Group

2 Alchemia SA About the company Shareholders of Alchemia SA ALCHEMIA is a young and dynamically growing group of companies, which operates in the sector of niche steel products, including seamless pipes and tubes, forged ware, forged and rolled ware, as well as rolled ware. The group made its debut on the stock exchange on 19th May Grażyna Wanda Karkosik 10.88% Pioneer Pekao IM SA 10% SKOTAN SA 5.02% 12.29% Others 62.07% Roman Karkosik Structure of the Group of Companies Huta Batory Rurexpol WRA Huta Bankowa Kuźnia Batory Batory Serwis Laboratorium Badań Batory 140 Batory steelworks Annual production capacity (thousands of tons) 75 Batory pipe mill Sales structure in 2010 Export 70 Rurexpol 55% 70 WRA 140 Huta Bankowa 25 Kuźnia Batory Employment: 2 thousand people Revenues: PLN million (2010) Capitalisation: PLN 1.8 billion (July 2011) Alchemia SA was founded in 2005 as a result of the acquisition of Huta Batory assets (Batory Steelworks). Subsequently, the Group developed consistently with the aim of attaining a strong position in the steel sector of the Polish and European markets. The following years saw further growth of Alchemia SA, with Laboratorium Badań Batory (Batory Research Laboratory) and Batory Serwis (Batory Service) taken over in In 2007, Huta Bankowa (Bankowa Steelworks) and Kuźnia Batory (Batory Forge) joined the group. The year 2011 witnessed further milestones in the history of the Group, necessary for it to become independent of the market whims, namely the incorporation of the Rurexpol pipe manufacturer from Częstochowa and Walcownia Rur Andrzej (Andrzej Pipe Mill) from Zawadzkie. Debut on the Warsaw Stock Exchange Acquisition of the Batory Steelworks Beginning of a metallurgic holding company formation Purchase of the Batory Forge and the Bankowa Steelworks Revenues at a level of approximately PLN 1 billion Restructuring of companies from the group Acquisition of Rurexpol and the Andrzej Pipe Mill Building a strong group of companies in metallurgic industry % Poland Sales structure: 45% of the revenue of the Alchemia Group comes from the domestic market, while 55% from export, with more than a half of products exported to the European Union. The main markets include: Germany, Denmark, Sweden, Norway, the Czech Republic, Austria, Slovakia, Hungary and Romania. Products are also sold to the following markets: Slovenia, Serbia, Croatia, Turkey, Iran, Egypt, Madagascar and Thailand.

3 Capital Group HUTA BATORY Grupa HUTA BATORY is among the major steel plants throughout Europe. Made of best-class alloys, seamless steel pipes by Huta Batory are intended for companies operating in the power industry, in crude oil and gas processing, in the production of machines, tools and arms, as well as in the construction of power plants (including solar power plants). Huta Batory is one of only few producers of P91 steel for the power industry. Production of seamless steel pipes in Poland in the years (thousands of tons) large-diameter seamless steel pipes ( mm Ø) smooth line pipes structural tubes ship pipes boiler tubes structural tubes intended for machining drill pipes intended for the primary industry pipes intended for the construction of crude oil and gas pipelines seamless boiler pipes in X10CrMoVNb9-1 (P91) and P92 grades casing pipes spigot drill pipes Huta Batory specializes in large-diameter seamless pipes (Ø mm). Huta Batory also uses 300 types of steel to manufacture ingots, which in turn are used to produce end-products such as bars, forgings and sheets. Types of steel used: carbon and alloy constructional steel boiler steel ship steel carbon and alloy tool steel spring steel steel with special physical properties, abrasion-resistant (heat-resistant, stainless) Production quality and specialist back-up facilities constitute an asset of the Alchemia Capital Group. 3

4 Alchemia SA RUREXPOL Grupa RUREXPOL is a manufacturer of specialist pipes of basic diameters mm used mainly for carrying and exploiting crude oil and gas. To meet the needs of power industry, Rurexpol produces alloy and structural tubes, which are machined at later stages to make elements of hydraulic servo-motors and load-bearing structures, like halls. Products supplied by the company were used to construct such facilities as the Legia stadium in Warsaw, interchanges and motorway overpasses. Sales structure in 2010 Export 60% 40% Poland Up to 60% of products by the Rurexpol steelworks is exported, amongst others to Germany, Italy, the USA, and the United Arab Emirates. casing pipes, 5 to 9 5/8 in diameter boiler tubes, 139 to 273 mm in diameter pipes for machining, 121 to 298 mm in diameter floor pipes, to 273 mm in diameter structural tubes, 121 to 273 mm in diameter line pipes used in gas engineering, 168, 219, 273 mm in diameter pressure line pipes for general purposes, 121 to 273 mm in diameter 4

5 Capital Group WALCOWNIA RUR ANDRZEJ Sales structure in 2010 Grupa WALCOWNIA RUR ANDRZEJ (WRA) manufactures hot-rolled seamless pipes of small diameters (21.3 mm to mm) and 2.0 to 10 mm in thickness. They are used in gas engineering, construction, power, chemical and shipbuilding industries, as well as to build machines for petrochemical purposes. structural and line tubes for general purposes pipes for cold treatment (magnifying glasses) boiler tubes of the 1st and 3rd grade of requirements pipes for fla mmable gases pipes for particular purposes (for shipbuilding, for threading, etc.) 75% A quarter of the mill s production is exported, mainly to Germany, Spain, Slovakia, and the USA. Poland The laboratories of the pipe mill make chemical analyses of steel and cast iron, as well as carry out metallographic examinations, and technological and mechanical tests. They are recognised by the Polish Register of Shipping, Lloyd s Register of Shipping, and the Office of Technical Inspection. 25% Export WRA is the only producer in Poland of hot- -rolled seamless pipes in small diameter from 21.3 mm to mm. 5

6 Alchemia SA Annual production capacity of long 120 HUTA BANKOWA products in thousands of tons 130 Grupa 300 HUTA BANKOWA is Poland s biggest manufacturer of railway wheel tyres and the owner of a state-of-the-art rolling mill for production of forged and rolled rings, used by transport companies. It offers products of the highest quality, indispensible in shipbuilding and power industries, including wind power engineering. tyres for rail wheel sets used in trains, trams and underground trains forged and rolled rings round bars mm in diameter equal-sided angles 200x200 mm bulb bars for shipbuilding rolled billets and blooms for forging purposes square rods for gas bottles Huta Bankowa Huta Stali Jakościowych Stalowa Wola Moravia Steel More than a half of the steelworks output is exported, amongst others to Germany, Austria, the Czech Republic, and the Benelux. The share of Huta Bankowa in the domestic market of forged and rolled tyres and rings is as high as The central laboratory of Huta Bankowa is highly recognised by the central laboratory of the Office of Technical Inspection in Poznań and by other classification societies like GL, LR, PRS, DNV, BV with regard to the capability of conducting comprehensive tests of metallurgic products. The scope of quality tests of metallurgic products includes: chemical analysis of carbon and alloy steel with the use of a spectrometer mechanical properties of metallurgic products macroscopic and microscopic metallographic examinations and thorough metallographic tests with the use of optical microscopes. 6

7 Capital Group Annual production capacity in Poland 50 CELSA Huta Ostrowiec KUŹNIA BATORY (in thousands of tons) 32 ZARMEN Zdzieszowice Kuźnia Batory Grupa More than half of the products are exported to e.g. Turkey, Germany, the USA, Slovenia, Austria, Great Britain, Norway, Sweden. HSW Kuźnia Stalowa Wola KUŹNIA BATORY manufactures forged products, and, as the only company in Poland, produces high-quality ESR steel. Steel elements are made for example for power industry. They are characterised by high metallurgic purity. The company has more than a 50% share in the market of forged bars of dimensions of mm and a share of almost 30% in the market of forged shapes (weight percentage). The forge is equipped with a modern flat-die forging press providing a pressure of 20MN, and swaging machines which cannot be found anywhere else in Poland. bars forged by means of swaging machines (round, square, hexagonal, flat) round and square bars forged by means of the press (made of construction, carbon, alloy and tool steel; designed to work in cold and hot conditions and for special purposes) flat bars and blocks forged by means of the press blocks with punched openings forged rings sleeves flat-die shapes forged in accordance with drawings Services offered: forging heat treatment machining electro slag remelting 7

8 ALCHEMIA SA ul. Łucka 7/9 PL Warsaw tel.: fax: co mmercial office tel.: tel.: fax: