Mytec 01. Roller Blind. Mytec 01

Transcription

1 Roller Blind Two operational systems are available: the chain drive system with a spring assist mechanism and the spring drive system with a speed control mechanism. Chain drive systems can be operated as either single linked or double. ingle, link and double chain drive systems come in four colours,, Warm white, and U

2 s Unique Features ink Type Double Type How to Operate the Blinds Chain Drive ystem The spring assisted mechanism allows you to operate the blind with ease even for a large or tall windows. pring Drive ystem Just pull down the base bar and the blind stops at anywhere you want. To raise the screen, pull the base bar just a little. The blind rolls up at the same speed without acceleration. Colour Variation Warm white Blinds up to 700 mm width and 3000 mm with 3.7 kg screen weight are possible. The spring assist mechanism attached makes for light operation even on large windows. Chain choice can be brass or stainless steel. ingle, link and double come in four colours. No crash at the top. speed controller is standard for the spring drive system, enabling the blind to go up at a constant speed. No irritation to stop the blind. rotary cam mechanism assures you to stop the blind anywhere at your discretion. 3

3 tructure Drawing (ingle Type) Installation Images 1 Unit Units ink 3 Units ink ink Type ( units link) W W1 36 mm 17.5 mm 4. mm 7 mm 13 mm W W1 width (W) 30 mm 30 mm 30 mm 38 mm 18 mm 10 mm ide Holder : 37 mm ide Holder : 5 mm 6 mm 15.5 mm W 9 mm W mm View 1.5 mm W 37 mm 4. mm Ø 4. mm ink Type (3 units link) W3 1 mm W 17.5 mm 17.5 mm W1 36 mm 4. mm 7 mm 13 mm 7 mm 13 mm For unnecessary pring ssist W3 W W1 width (W) 30 mm 30 mm ide Holder : 37 mm ide Holder : 38 mm 18 mm 10 mm ide Holder : 37 mm ide Holder : width (W) 30 mm 30 mm 30 mm 30 mm 38 mm 18 mm 10 mm ide Holder : 37 mm ide Holder : 5 mm 15.5 mm W3 9 mm 6 mm 6 mm W 6 mm W mm W 36 mm 15.5 mm 0.5 mm 1.5 mm and s Roller Pipe pring et luminum ink ingle Bracket ink Joint Pipe End Molded resin, luminum Molded resin Non-Balancer et ink Joint Pin Brass Metal Chain Housing Metal Ball Chain U or Brass P ide Bracket / Metal Chain Connector U or Brass Chain ide Bracket / pecifications Maximum creen Weight (1 Unit) 3.7 kg ink Type Units ink 3 Units ink 5.7 kg 5.1 kg Weight 1.9 kg.0 kg.1 kg (width: 000 mm without screen) Ex.: pring et F, ide Holder Metal Ball Chain length is 3000 mm llowable ize Width (W) Height 300 mm to 700 mm 100 mm to 3000 mm 1000 mm to 5000 mm W1, W 500 mm 100 mm to 500 mm 1500 mm to 4500 mm W1, W, W mm llowable for Roller Pipe 4 mm DI 100 mm to 500 mm Ratio (W : H) Note: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. 4 Please use Roller Pipe 46 mm DI. for W=,010 mm or more. 5

4 tructure Drawing (Double Type) Installation Images 1 Unit Units ink 3 Units ink ink Type ( units link) 15 mm W 1 mm W1 9 mm 15 mm 1 4. mm 0 mm 18 mm Both ides Operation W width (W) 30 mm 30 mm 30 mm W1 101 mm 10 mm 41 mm 43 mm 10 mm 83 mm 15.5 mm W 9 mm 6 mm W mm One ide Operation ink Type (3 units link) 15 mm W3 1 mm W W1 9 mm 15 mm mm 0 mm 18 mm 1.5 mm View Double Type 15 mm W 30 mm 15 mm 4. mm W3 W W1 width (W) 30 mm 30 mm 30 mm 30 mm 101 mm 10 mm 41 mm 43 mm 10 mm 83 mm 0 mm 18 mm 15.5 mm W3 9 mm 6 mm 6 mm W 6 mm W mm For unnecessary pring ssist 1.5 mm width (W) 30 mm 30 mm 101 mm 10 mm 41 mm and s Roller Pipe luminum ink Double Bracket Molded resin, luminum Double Bracket Plate teel 43 mm 10 mm 83 mm pring et Non-Balancer et Metal Chain Housing ink Joint Pipe End ink Joint Pin Molded resin Brass Metal Ball Chain Metal Chain Connector U or Brass U or Brass 15.5 mm W 36 mm 0.5 mm (.81") pecifications Double Type (1 Unit) Units ink Double ink Type 3 Units ink Maximum creen Weight 7.4 kg 11.3 kg 10. kg 1.5 mm llowable ize Weight Width (W) Height 4. kg 4.4 kg 4.6 kg (width: 000 mm without screen) Ex.: pring et F, ide Holder Metal Ball Chain length is 3000 mm 300 mm to 700 mm 100 mm to 3000 mm 1000 mm to 5000 mm W1, W 500 mm 100 mm to 500 mm 1500 mm to 4500 mm W1, W, W mm llowable for Roller Pipe 4 mm DI 100 mm to 500 mm Ratio (W : H) Note: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. 6 Please use Roller Pipe 46 mm DI. for W=,010 mm or more. 7

5 tructure Drawing View and s width (W) Roller Pipe pring et luminum W 37 mm Clutch 4. mm Connect Pin teel 7 mm 13 mm 10 mm 38 mm 18 mm ide Holder : 37 mm ide Holder : peed Controller Pipe End P ide Bracket / Molded resin Molded resin ide Holder : 37 mm ide Holder : End ide Bracket / 0 mm pecifications 15.5 mm W 31 mm 15.5 mm Maximum creen Weight 1.8 kg Weight 1.8 kg (width: 000 mm without screen) Ex.: pring et F, ide Holder 5 mm 5 mm llowable ize Width (W) Height 300 mm to 000 mm 100 mm to 3000 mm Ratio (W : H) Note: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. 8 9

6 Typical Roll-up Diameter Roller pipe 4 mm dia. / election of ide Holder Installation Dimensions ingle Type Class (Thickness) Height 0.0 mm 400 mm 800 mm 100 mm 1600 mm 000 mm 400 mm 800 mm 3000 mm 4 46 mm Ceiling attachment Wall attachment B C D mm mm mm a a E F G H I J mm mm mm mm 66 mm 66 mm 69 mm 7 75 mm 78 mm 71 mm 7 77 mm 79 mm The dimensions above are common to all two types: and. K mm 63 mm 76 mm 80 mm mm The roll-up diameter might be actually different. Please contact our local agent for another size. Height ide Holder size Roller pipe 46 mm dia. / election of ide Holder ( only) Class (Thickness) 75 mm 80 mm 400 mm 800 mm 100 mm 1600 mm 000 mm 400 mm 800 mm 3000 mm = a + (ink Type) a ide Holder ide Holder 37 mm 0.0 mm B mm 37 mm C mm D E F mm Double Type G H I J K mm mm mm mm mm mm ide Holder size The roll-up diameter might be actually different. Please contact our local agent for another size. 63 mm 63 mm 73 mm 66 mm 7 77 mm 69 mm 7 76 mm 78 mm 75 mm 77 mm 80 mm 7 76 mm 79 mm Ceiling/Wall attachment B b a c = a + creen 1 Double (ink Type) B = b + creen + < C a b c 83 mm 101 mm creen 1 creen 10 11

7 Parts Name eft Operation Right Operation Code Name eft Operation Right Operation Code Roller Pipe 4 mm DI Metal Chain Housing mm DI ( 1) Metal Chain Housing G/H pring et B C D For ink type only Pipe End E F P ide Bracket G H Y B C D eft Right E F eft For ink type only Non-Balancer et G H Right Clutch MT Chain ide Bracket Connect Pin 1.6 mm x 18 mm Chromate End ide Bracket peed Controller 400 GFCM Height 410 mm and pring E or F 800 GFCM Please contact our local agent. 1 13

8 Name eft Operation Right Operation Code Name eft Operation Right Operation Code ink ingle Bracket Double Bracket Plate eft ink Double Bracket Right Double Bracket P ide Mount Use with Double Bracket Plate Double Bracket Chain ide Mount ink Joint Pipe End ink Joint Pin Use with Double Bracket Plate Metal Ball Chain U Brass Metal Chain Connector U Brass Winder