SURFACE MOUNT CERAMIC SURFACE MOUNT MULTI - LAYER DS 101 J N. Value. Tolerance. Example 101 = 100pF 102 = 1nF 103 = 10nF 104 = 100nF.
|
|
|
- Eugenia Baker
- 7 years ago
- Views:
Transcription
1 NPO, X7R, Y5V/Z5U dielectric All standard chip sizes 13" reel size available Our range of SMD multi-layer ceramic capacitors compliments the leaded capacitors available in radial and aial form. All product packaging is fully marked with date and lot traceability information. Most industry standard sizes are available, including 0402 and OUTLINE DRAWING T L L W T P W Size Code mm mm mm mm Indicates termination area Dimensions in mm P C P 0402 ± 0.5± MAX ±5 0.8± 0.9 MAX ± ±5 1.3 MAX ± ±5 1.3 MAX ± ± MAX ± ± MAX ±0.4 5± MAX 0.5 TOLERANCES materials, capacitance values and tolerances are only available in the following combinations. Available Tolerances Tolerance Codes ± 0.25pF, ± 0.5pF E12 Values B = ± pf COG ± 1% C = ± 0.25pF ± 2% D = ± 0.5pF ± 5% F = ± 1% G = ± 2% J = ± 5% K = ± % M = ± 20% Z = % X7R/ X5R ± 5%, ± 20% E12 Values ** Y5V ± 20%, % E6 Values Z5U ± 20%, % E6 Values ORDERING INFORMATION DS U 0805 C Part Voltage Size 1 J N Value Tolerance Plating U = 50/63V A = 0V F = 200V E = 25V C = 16V B = V J = 500V G = 250V D = 6.3V C = NPO R =- X7R X = X5R G = Y5V W = Z5U Eample 1 = 0pF 2 = 1nF 3 = nf 4 = 0nF See Above ** for code N = Nickel barrier 13
2 RANGE ULTRA STABLE CERAMIC CHIP CAPACITORS NICKEL BARRIER TERMINATIONS NPO Case Size Rated Voltage (VDC) pf(0R5) pf (1R0) 1.2pf (1R2) 1.5pf(1R5) 1.8pf (1R8) 2.2pf (2R2) 2.7pf (2R7) 3.3pf (3R3) 3.9pf (3R9) 4.7fpf(4R7) 5.6pf (5R6) 6.8pf (6R8) 8.2pf (8R2) pf(0) 12pf (120) 15pf (150) 18pf (180) 22pf (220) 27pf (270) 33pf (330) 39pf (390) 47pf (470) 56pf (560) 68pf(680) 82pf (820) 0pf (1) 120pf (121) 150pf (151) 180pf (181) 220pf (221) 270pf (271) 330pf (331) 390pf(391) 470pf (471) 560pf (561) 680pf (681) 820pf (821) 1,000pf (2) 1,200pf (122) 1,500pf (152) 1,800pf (182) 2,200pf (222) 2,700pf (272) 3,300pf (332) 3,900pf (392) 4,700pf (472) 5,600pf (562) 6,800pf (682) 8,200pf (822) 0.01uf (3) 0.012uf (123) 0.015uf (153) 0.018uf (183) 0.022uf (223) 0.027uf (273) 0.033uf (333) 0.039uf (393) 14
3 RANGE STABLE CERAMIC CHIP CAPACITORS NICKEL BARRIER TERMINATIONS X7R Case Size Rated Voltage (VDC) pf (1) 120pf (121) 150pf (151) 180pf(181) 220pf (221) 270pf (271) 330pf (331) 390pf (391) 470pf (471) 560pf (561) 680pf (681) 820pf (821) 1,000pf (2) 1,200pf (122) 1,500pf (152) 1,800pf (182) 2,200pf (222) 2,700pf (272) 3,300pf (332) 3,900pf (392) 4,700pf (472) 5,600pf (562) 6,800pf (682) 8,200pf (822) 0.0uf (3) 0.012uf (123) 0.015uf (153) 0.018uf (183) 0.022uf (223) 0.027uf (273) 0.033uf (333) 0.039uf (393) 0.047uf (473) 0.056uf(563) 0.068uf (683) 0.082uf (823) 0.uf (4) 2uf (124) 5uf(154) 8uf(184) 0.22uf(224) 0.27uf (274) 0.33uf (334) 0.39uf (394) 0.47uf (474) 0.56uf (564) 0.68uf (684) 0.82uf (824) uf (5) 15
4 RANGE Dialectric X5R Case Size 0402 Rated Voltage (VDC) uf (333) 0.047uf (473) uf (4( For other case sizes and higher 0402 capacitance see DS - High. General Purpose Ceramic Chip Capacitors Y5V/Z5U Nickel Barrier Terminations Dialectric Y5V/Z5U Case Size Rated Voltage (VDC) uf (3) 0.015uf (153) 0.022uf (223) 0.033uf (333) 0.047uf (473) 0.068uf (683) 0.uf (4) 5uf (154) 0.22uf (224) 0.33uf (334) 0.47uf (474) 0.68uf (684) uf (5) TAPE DIMENSIONS (mm) Type P Type C D 0 E A 0 F W B 0 G t t K 1 P P 2 P 0 directional of unreeling W Type D0 P P0 P2 E F G t 8.0 ± 0.3 C 1.5 +, ± 4.0 ± 2.0 ± ± 3.5 ± min 1.1 ma 8.0 ± 0.3 P 1.5 +, ± 4.0 ± 2.0 ± ± 3.5 ± min 0.3 ma 12.0 ± 0.3 P 1.5 +, ± 4.0 ± 2.0 ± ± 5.5 ± min ma C = Card P = Plastic REEL DIMENSIONS (mm) ± 0.5 Nom. Tape Width A W or or ± W 1 16
5 PERFORMANCE CHARACTERISTICS PERFROMANCE CHARACTERISTICS 1. ELECTRICAL Code COG X7R X5R Y5V Z5U General Eamples of Applications COG dielectrics are very stable. Temperature, frequency and time vary little. Typical applications are in tuned circuits, timing circuits and fast rise time X7R dielectrics offer higher capacitance for a given case size than COG. bypass, coupling and filtering X5R dielectrics offer higher capacitance for a given case size than X7R. Applictaions would include bypass, coupling and filtering Y5V dielectrics offer the highest capacitance for a given case size than X5R. bypass and decoupling circuits or where temperature dependence is not of major importance. Z5U dielectrics offer the highest cpacitance for a given case size than Y5V. bypass and decoupling circuits or where temperature dependance is not of major importance. Temperature Range - 55 to to to to to + 85 Insulation Resistance (I.R.) after 1 min charging at Rated Voltage > 0G ohms or 00 sec whichever is less >0G ohms or 00 sec whichever is less Voltage Ratings dc 50, 0, 200, 500, 16, 25, 50, 0, 200, 500 >0G ohms or 00sec >G ohms or 0 sec,16,25,50, 16, 25, 50, 0 25, 50 >G ohms or 0 sec Proof Voltage 2.5 rated voltage 2.5 rated voltage 2.5 X rated voltage. 2 rated voltage 2.5 rated voltage Ma allowable Variation over Temperature Range C > 20pf : 0 ± 00ppm/ C C < 20pF : see CECC ± 15% ± 15% +30% to - 80% +22% to - 56% 2. ENVIRONMENT Test Conditions Requirement Resistance to soldering heat Adhesion Rapid change or Temperature Components completely immersed in a solder bath at 260 ± for 5 secs. Component mounted to substrate a force of 5N applied normal to the line joining the termination and in a line parallel to the substrate to 125 C, 5 cycles (1B, 2C1) - 25 to +85, 5 cycles (2F4) 25% Ma leaching on each edge No visible damage No visible damage. After recovery C/C ±1% or pf COG C/C ±% X7R C/C ±% X5R C/C ±20% Y5V Tan 1.5 specified value IR specified value 17
6 3. AGEING and impedance will vary depending on circuit operating conditions and the type of dielectric used - typical performance graphs relating to these materials are shown below. 3.1 FREQUENCY 0 IMPEDANCE nf 0 0 nf IMPEDANCE/ESR (OHMS) ESR CAPACITANCE (nf) TAN CAPACITANCE IMPEDANCE/ESR (OHMS) IMPEDANCE ESR Z (Ω) nf 47 nf 0 nf 220 nf 470 nf 1 F 1.5 F nf 4.7 nf 0 F (MHz) 0 nf 00 IMPEDANCE/ESR (OHMS) IMPEDANCE ESR CAPACITANCE (nf) 0 TAN CAPACITANCE TEMPERATURE 18
7 SURFACE MOUNT CERAMIC SMD MULTI-LAYER HIGH CAPACITANCE DS High capacitance range complimenting the standard DS range Available in X7R, X5R, Y5V and Z5U Suitable for many applications including digital consumer goods and high resolution LCD displays OUTLINE DRAWING T L L W T P W Indicates termination area Size Code mm mm mm mm 0402 ± 0.5± MAX ±5 0.8± 0.9 MAX ± ±5 1.3 MAX ± ±5 1.3 MAX ± ± MAX ± ± MAX 0.5 Dimensions in mm P C P TOLERANCE DIELECTRIC MATERIALS, CAPACITANCE VALUES AND TOLERANCE AVAILABLE Available Tolerance Tolerance Codes X7R +/- %, +/- 20% As Tables K=% M=20% X5R +/- %, +/- 20% As Tables K=% M=20% Y5V +/- 20%, - 20% + 80% As Tables M=20% Z= -20% + 80% Z5U +/- 20%, - 20% + 80% As Tables M=20% Z= -20% + 80% ORDERING INFORMATION DS B 0805 X Part Voltage Size 6 K N Value Tolerance Plating U = 50 E = 25V C = 16V B = V D = 6.3V R =- X7R X = X5R G = Y5V W = Z5U Eample 4 = 0nF 5 = 1µF 6 = µf K = % M = 20% Z = 20+80% N = Nickel barrier 19
8 SURFACE MOUNT CERAMIC SMD MULTI-LAYER HIGH CAPACITANCE DS RANGE X7R Case Size Rated Voltage (VDC) uF (154) 0.22uF (224) 0.33uF (334) 0.47uF (474) uf (5) 1.5uF (155) 2.2uF (225) 3.3uF (335) 4.7uF (475) uf (6) X5R Case Size Rated Voltage (VDC) uF (224) 0.33uF (334) 0.47uF (474) 0.68uF (684) 0.82uF (824) uf (5) 1.2uF (125) 1.5uF (155) 1.8uF (185) 2.2uF (225) O O O O O O 3.3uF (335) O O O 4.7uF (475) O O O O 6.8uF (685) O O O 8.2uF (825) O O O uf (6) O O O O O 12uF (126) O O 15uF (156) O O 22uF (226) F O O O 33uF (336) 47uF (476) O 0uF (7) F=Future o=reflow Only General Purpose Ceramic Chip Capacitors Y5V/Z5U Nickel Barrier Terminations Y5V/Z5U Case Size Rated Voltage (VDC) uF (155) 2.2uF (225) 3.3uF (335) 4.7uF (475) 6.8uF (685) uf (6) 22uF (226) 47uF (476) 0uF (7) 20
9 SURFACE MOUNT CERAMIC SMD MULTI-LAYER HIGH CAPACITANCE DS TAPE DIMENSIONS (mm) Type P Type C D 0 A 0 B 0 E F G W t t K 1 P P 2 P 0 directional of unreeling W Type D0 P P0 P2 E F G t 8.0 ± 0.3 C 1.5 +, ± 4.0 ± 2.0 ± ± 3.5 ± min 1.1 ma 8.0 ± 0.3 P 1.5 +, ± 4.0 ± 2.0 ± ± 3.5 ± min 0.3 ma 12.0 ± 0.3 P 1.5 +, ± 4.0 ± 2.0 ± ± 5.5 ± min ma C = Card P = Plastic REEL DIMENSIONS (mm) 2 ± 0.5 Nom. Tape Width A W or or ± PERFORMANCE CHARACTERISTICS W 1 PERFROMANCE CHARACTERISTICS 1. ELECTRICAL Code X7R X5R Y5V Z5U General Eamples of Applications X7R dielectrics offer higher capacitance for a given case size than COG. bypass, coupling and filtering X5R dielectrics offer higher capacitance for a given case size than X7R. Applictaions would include bypass, coupling and filtering Y5V dielectrics offer the highest capacitance for a given case size than X5R. bypass and decoupling circuits or where temperature dependence is not of major importance. Z5U dielectrics offer the highest cpacitance for a given case size than Y5V. bypass and decoupling circuits or where temperature dependance is not of major importance. Temperature Range -55 to to to to + 85 Insulation Resistance (I.R.) after 1 min charging at Rated Voltage >0G ohms or 00 sec whichever is less >0G ohms or 00sec >G ohms or 0 sec >G ohms or 0 sec Voltage Ratings dc, 16, 25, 50,16,25, 16, 25, 35, 16, 25, 35 Proof Voltage 2.5 rated voltage 2.5 X rated voltage. 2 rated voltage 2.5 rated voltage Ma allowable Variation over Temperature Range ± 15% ± 15% +30% to - 80% +22% to - 56% 2. ENVIRONMENT Test Conditions Requirement Resistance to soldering heat Adhesion Components completely immersed in a solder bath at 260 ± for 5 secs. Component mounted to substrate a force of 5N applied normal to the line joining the termination and in a line parallel to the substrate. Rapid change or Temperature - 55 to 125 C, 5 cycles (1B, 2C1) - 25 to +85, 5 cycles (2F4) 25% Ma leaching on each edge No visible damage No visible damage. After recovery C/C ±1% or pf COG C/C ±% X7R C/C ±% X5R C/C ±20% Y5V Tan IR. 1.5 specified value 0.25 specified value 21
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Polymer Termination. Mechanical Cracking 2. The reason for polymer termination. What is Polymer Termination? 3
Polymer Termination An alternative termination material specifically designed to absorb greater levels of mechanical stress thereby reducing capacitor failures associated with mechanical cracking Mechanical
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
T.C NPO/COG X7R(B) Y5V(Y/F) Z5U(E) Dielectric type Stable Class I Dielectric Stable ClassII Dielectric. temperature
F E A T U R E S Miniature size,wide capacitance,tape and reel packaging available for auto-placement. Coating by epoxy resin,creales the excellent humidity resistance and preventsbody trom damaging during
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
ATC 800 B Series NPO Ceramic, High RF Power Ultra-Low ESR Multilayer Capacitors
800 Series NPO Ceramic, High RF Power Ultra-ow ESR Multilayer Capacitors Case Size (" x ") Rugged, reliable NPO dielectric Case optimized for highest self resonant frequency s 800 Series offers superb
3216 Ceramic Chip Antenna for Bluetooth/WLAN Application
ANTENNA PRODUCTS Mars Liu C.T.Lee Page 1 sheet 190-1 A4 for Bluetooth/WLAN Application Preliminary Product Specification Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth
Chip Monolithic Ceramic Capacitors
This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice.
VT-802 Temperature Compensated Crystal Oscillator
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
P O W E R C A P A C I T O R A S S E M B L I E S
AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
Capacitor Self-Resonance
Capacitor Self-Resonance By: Dr. Mike Blewett University of Surrey United Kingdom Objective This Experiment will demonstrate some of the limitations of capacitors when used in Radio Frequency circuits.
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
High Precision TCXO / VCTCXO Oscillators
Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
Encoder. Switches. Series Size SMD
Piher is recognised as a world leader in custom controls and sensor solutions by the top Land Vehicle/Automotive and Appliance players. In this catalogue you will find a selection of the most prolific
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Ceramic Trimmer Capacitors
!Note T3E8.pdf 2.9.2 Ceramic Trimmer Capacitors TZB4 Series.±. Depth.5.4±. dia. Features. Miniature rectangular shape : 4.(W)x4.5(L)x3.(H)mm. 2. Color coded case facilitates identification of capacitance
Fiber Optics. Integrated Photo Detector Receiver for Plastic Fiber Plastic Connector Housing SFH551/1-1 SFH551/1-1V
Fiber Optics Integrated Photo Detector Receiver for Plastic Fiber Plastic Connector Housing SFH551/1-1 Features Bipolar IC with open-collector output Digital output, TTL compatible Sensitive in visible
C ole s quality Open Frame Instrument Rotary Switch provides low
OPEN FRAME series C ole s quality Open Frame Instrument Rotary Switch provides low contact resistance (.005W), very high contact reliability, smooth action with positive positioning, precision design,
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
User Guide #0602. User Guide for IRDC3624 Evaluation Board using IRF8910 SO-8, dual MOSFET and 2x 22µF ceramic output capacitors.
User Guide #0602 User Guide for IRDC3624 Evaluation Board using IRF8910 SO-8, dual MOSFET and 2x 22µF ceramic output capacitors By Parviz Parto Table of Contents Page Description...1 Connections...1-2
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
Powering Integrated Circuits (ICs), and managing ripple voltage as it relates
Ripple Voltage & ESR Powering Integrated Circuits (ICs), and managing ripple voltage as it relates to ESR of capacitors Low voltage ICs require supply voltage (Vcc) to have reduced levels of ripple voltage
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
TEP 200WIR Series, 180 240 Watt
TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155
LM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
LM118/LM218/LM318 Operational Amplifiers
LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
AAT3238 DATA SHEET. 300mA MicroPower TM High Performance LDO Linear Regulator. Applications. Features. General Description. Typical Application
General Description The MicroPower low dropout (LDO) linear regulator is ideally suited for portable applications where very fast transient response, extended battery life, and small size are critical.
LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
VJ 6040 Mobile Digital TV UHF Antenna Evaluation Board
VISHAY VITRAMON Multilayer Chip Capacitors Application Note GENERAL is a multilayer ceramic chip antenna designed for receiving mobile digital TV transmissions in the UHF band. The target application for
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications
Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NBB-402 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO
The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit
Switching Regulator Series The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit No.1327EAY7 Multi-layer Ceramic Capacitor (MLCC) with large-capacitance can be used as smoothing-capacitor
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
ICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-01 Description The ICS650-01 is a low-cost, low-jitter, high-performance clock synthesizer for system peripheral applications. Using analog/digital Phase-Locked Loop (PLL) techniques,
INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: MFSH615712-100
SURFACE MOUNT MODEL: MFSH6572 65-72 MHz FEATURES: Small Size, Surface Mount (.6" x.6") Low Phase Noise Standard Programming Interface Ultra Wide Tuning Range Lead Free - RoHS Compliant Patented REL-PRO
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
RF Design Guidelines: PCB Layout and Circuit Optimization
AN 1200.04 Application Note RF Design Guidelines: PCB Layout and Circuit Optimization Copyright Semtech 2006 1 of 22 www.semtech.com 1 Table of Contents 1 Table of Contents...2 1.1 Index of Figures...2
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
Thermal Resistance, Power Dissipation and Current Rating for Ceramic and Porcelain Multilayer Capacitors
Thermal Resistance, Power Dissipation and Current Rating for Ceramic and Porcelain Multilayer Capacitors by F. M. Schaubauer and R. Blumkin American Technical Ceramics Reprinted from RF Design Magazine,
Typical Performance 1. IS-95C ACPR 21.0 - - - dbm WCDMA ACLR - 19.5 18.5 - dbm
Device Features OIP3 = 45.0 dbm @ 1900 MHz Gain = 15.0 db @ 1900 MHz Output P1 db = 27.5 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.71 HMC42ST8 / 42ST8E AMPLIFIER,.4-2.2
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
ICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
SPECIFICATION MARITEX 06/30/ 08 CHIP INDUCTORS (ROHS)
FL201209SERIESLFR FL201209SERIESLFR Scope: This specification applies to multilayer ferrite & ceramicchip inductors. 1. Part Number Key & Mechanical Drawing FL XX XX XX XXX X A B C Tolerance Inductance
STF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive
Spread-Spectrum Crystal Multiplier DS1080L. Features
Rev 1; 3/0 Spread-Spectrum Crystal Multiplier General Description The is a low-jitter, crystal-based clock generator with an integrated phase-locked loop (PLL) to generate spread-spectrum clock outputs
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
SC Series: MIS Chip Capacitors
DATA SHEET SC Series: MIS Chip Capacitors Applications Systems requiring DC blocking or RF bypassing Fixed capacitance tuning element in filters, oscillators, and matching networks Features Readily available
General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.
DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
DATA SHEET. SiGe LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS. Part Number Order Number Package Marking Supplying Form
DESCRIPTION The μpc8tk is a silicon germanium (SiGe) monolithic integrated circuit designed as a low noise amplifier for GPS and mobile communications. The package is -pin lead-less minimold, suitable
DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor
DISCRETE SEMICONDUCTORS DATA SHEET September 1992 FEATURES High power gain Low noise figure Easy power control Good thermal stability Withstands full load mismatch Gold metallization ensures excellent
Application Note 58 Crystal Considerations for Dallas Real-Time Clocks
www.maxim-ic.com Application Note 58 Crystal Considerations for Dallas Real-Time Clocks OVERVIEW This application note describes crystal selection and layout techniques for connecting a 32,768Hz crystal
LM2704 Micropower Step-up DC/DC Converter with 550mA Peak Current Limit
Micropower Step-up DC/DC Converter with 550mA Peak Current Limit General Description The LM2704 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control
Selector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
K9AXN SERVICE NOTE 022h IMPORTANT CAPACITOR INFORMATION
1 K9AXN SERVICE NOTE 022h IMPORTANT CAPACITOR INFORMATION One of the most frequent errors when restoring vintage radio equipment is removing the paper capacitors and indiscriminately replacing them with
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
![November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]](/thumbs/29/13476958.jpg "November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
S-Band Low Noise Amplifier Using the ATF-10136. Application Note G004
S-Band Low Noise Amplifier Using the ATF-10136 Application Note G004 Introduction This application note documents the results of using the ATF-10136 in low noise amplifier applications at S band. The ATF-10136
If there is any doubt about the results, measurement shall be made within the following limits : Ambient temperature 25±3 Relative humidity 40%~70%
APPROVED : Tin SHEET : 2 of 10 Standard atmospheric conditions Unless otherwise specified, the standard range of atmospheric conditions for making measurement and tests are as follow : Ambient temperature
SUPERSEDED REVISION. Gas Discharge Tubes GTCX28-XXXM-R20 Series. Features: Benefits: Applications
GTCX28-XXXM-R20 Series Raychem Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
Since any real component also has loss due to the resistive component, the average power dissipated is 2 2R
Quality factor, Q Reactive components such as capacitors and inductors are often described with a figure of merit called Q. While it can be defined in many ways, it s most fundamental description is: Q
ATC 100 C Series Porcelain High RF Power Multilayer Capacitors
A Series Porcelain High RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 1 pf to 2700 pf High Q Ultra-Stable Performance ow ESR/ES High RF urrent/voltage High RF Power High Reliability
MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features.
Features High Voltage CMOS Technology Complementary Outputs Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over
SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
Safety Application Guide for Multilayer Ceramic Chip Capacitors
CK-E-1404-01 Date: TO: Safety Application Guide for Multilayer Ceramic Chip Capacitors Signature by receiver(s) Date * Please sign all copies of this document and return one copy for our records. Capacitor
INTEGRATED CIRCUITS. For a complete data sheet, please also download:
INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS
MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.
Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
Yet More On Decoupling, Part 1: The Regulator s Interaction with capacitors Kendall Castor-Perry
Page 1 of 6 Yet More On Decoupling, Part 1: The Regulator s Interaction with capacitors Kendall Castor-Perry In Know the sometimes-surprising interactions in modelling a capacitor-bypass network (http://www.planetanalog.com/showarticle.jhtml?articleid=202402836,
Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not