Emission- and temperature measuring equipment an overview

Transcription

1 Emission- and temperature measuring equipment an overview Heavy metals,pah, dioxins Infrared Camera Emission Analyser Particles FTIR Mass Spectrometer Open Path FTIR

2 FLIR SC1000 Infrared Cameras -20 to 2000 C, 2,0% -640x480 resolution -Spectral range: 7,5-13um FLIR SC C C

3 Multi-wavelength pyrometer FAR FMP2 Designed to measure molten metal, temperature range: C, ±0,25-0,75% Wavelength range: nm (visible light between nm) Computer analysis and analog output 3 lenses - 0,5m, 1,5m and 6m measuring distance

4 Metlab 1925 Suction pyrometer -Accurate high temperature measurement in off gas, up to 1300 C -Radiation protected type K thermocouple inside the nozzle

5 Temperature Calibration Equipment C

6 Testo 350 Emission Analyzer C, continuous sample suction

7 Portable Mass spectrometer 20 ml min -1 sampling rate Very fast response time Highly portable Large calibration range Heated capillary inlet Membrane adapter for application to liquids

8 Portable Mass Spectrometer Application areas: Leak detection: almost all species leave mass trace Examples of detection limits: CF4/C2F6: < 25 ppb H2SO4: < 5 ppm COS: < 5 ppm HF: < 5 ppm CO: < 5 ppm CO2: < 5 ppm HCl: < 5 ppm NH3: < 50 ppm SO2: < 5 ppm Cl2: < 1 ppm Toluene: < 1 ppb Krypton: < 2 ppb NOX: < 1 ppm H2: < 1 ppm CH4: < 50 ppb Benzene: < 1 ppb

9 Portable Protea 204M/C FTIR C, continuous sample suction

10 Open Path FTIR

11 Open Path FTIR Through-gas monitoring Atmospheric monitoring Portable (Tripod mountable, 35 kg) Fast response time Stiring cooled Application: general application see Tables of ProtIR 204M Special applications: Measuring of adsorbing gases like SO 3, H 2 S Corrosive gases like HF, H 2 SO 4, HCl Open path ftir

12 Tunable Diode Laser Absorption Spectroscopy: HF and H 2 O Neo Monitors Lasergas II SP Limit Of Detection (Path length 1 m): HF: 15 ppb H 2 O: 100 ppb Current Calibration (10 cm): 1 ppm - 3 % HF % H 2 O Measuring cell: 10 cm Teflon coated Stainless Steel Sapphire glass P and T probes for compensation 12

13 ELPI 10lpm particle measuring High temperature particle measurements, up to 1300 C 7nm-10µm measuring range in 12 steps, 2-3 sec response time Gravimetric and chemical analysis possible after measurement High dust concentrations allowed due to extra diluters and cyclone Electrostatic measuring principle

14 Concentration of heavy metals, PAH and dioxins:

15 Prices and specifications Measuring equipment Prices Additional info FTIR, gas measurements up to 1300ºC Open path FTIR Portable mass spectrometer, gases up to 1300ºC PAH, dioxin and heavy metals Temperature range up to 1300 C ELPI particle size measurements Temoerature range up to 1300ºC METLAB suction pyrometer up to 1300ºC FAR spectro pyrometer, ºC IR camera (640x480, µm) ºC IR camera (256x256, 3.4-5µm) ºC 8000,- first day, 1600,- following days 11000,- first day, 2200,- following days 4500,- first day, 900,- following days 5000,- first day, 1000,- following days 8000,- first day, 1600,- following days 600,- first day, 120,- following days 3000,- first day, 600,- following days 4000,- first day, 800,- following days 1000,- a day Rented out with trained operator/ engineer from SINTEF in addition Rented out with trained operator/ engineer from SINTEF in addition Rented out with trained operator/ engineer from SINTEF in addition Rented out with trained operator/ engineer from SINTEF in addition Rented out with trained operator/ engineer from SINTEF in addition Rented out with trained operator/ engineer from SINTEF in addition Rented out with trained operator/ engineer from SINTEF in addition. 2 weeks renting period Rented out with trained operator/ engineer from SINTEF in addition Temperature calibration equipment ºC 2000,- a day Calibration at SINTEF with trained operator/ engineer from SINTEF in addition Lasergas - HF and H 2 O 2800,- first day 550,- following days

16 For questions or reservation, please contact: Svend Grådahl tel SINTEF Materials & chemistry Alfred Getz vei Trondheim