POLES & BASES. Pedestal Poles
|
|
|
- Martina Riley
- 9 years ago
- Views:
Transcription
1 Pedestal Poles Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s cast aluminum square base is FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism Pedestal Pole, 4 ch 40, pun Alum No Threads Length PB Pedestal Pole, 4-8 NPT ch 40, pun Alum w/ Pelican I Length PB Pedestal Pole, 4-8 NPT ch 80, pun Alum Length PB Pedestal Pole, 4-8 NPT ch 40, teel Length PB Pedestal Pole, 4-8 NPT ch 40, Galv teel Length PB GLV - Blank=Galvanized Only over Galvanized 3. Pedestal Pole, Welded, 4-8 NPT w/ 5-1/2 Nipple Length, teel Length PB GLV=Galvanized Note: 1. tandard poles are typically sold in 1 foot increments. For other lengths contact sales. 2. ee Reference ection for available paint colors. 6/15/16 Page T11-1
2 quare Pedestal Bases Aluminum Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s PB-5334 and PB-5335 cast aluminum square bases are FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism. quare Base Assembly, Alum w/ Alum oor oor PB NL=No Logo Blank=Pelco Logo et crews 1=1 Hex Bolt 3=3 et crews quare Base Assembly, Alum w/ Plastic oor oor PB PNC NL=No Logo Blank=Pelco Logo et crews 1=1 Hex Bolt 3=3 et crews quare Base Assembly, Alum Heat Treated w/ Alum oor oor PB NL=No Logo Blank=Pelco Logo et crews 1=1 Hex Bolt 3=3 et crews quare Base Assembly, Alum Heat Treated w/ Plastic oor oor PB PNC NL=No Logo Blank=Pelco Logo et crews 1=1 Hex Bolt 3=3 et crews 13-3/ min max. Note: 1. AAHTO Certified quare Aluminum Base: PB-5334 and PB-5335 aluminum square bases above are available with AAHTO certifications and FHWA approval. Please specify by adding the Certification Part No. C-1001 in addition to the base part number. 2. All assemblies are supplied standard with stainless fasteners. 3. ee Reference ection for available paint colors. Page T11-2 4/1/15
3 quare Pedestal Bases Aluminum Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s PB-5334 and PB-5335 cast aluminum square bases are FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism. quare Base Assembly, Alum teel Coupling w/ Alum oor oor et crews PB NL=No Logo Blank=Pelco Logo 1=1 Hex Bolt 3=3 et crews quare Base Assembly, Alum teel Coupling w/ Plastic oor oor et crews PB PNC NL=No Logo Blank=Pelco Logo 1=1 Hex Bolt 3=3 et crews quare Base Assembly, Alum lip Fit w/ Alum oor oor PB NL=No Logo Blank=Pelco Logo quare Base Assembly, Alum lip Fit w/ Plastic oor oor PB PNC NL=No Logo Blank=Pelco Logo 13-3/ min max. Note: 1. All assemblies are supplied standard with stainless fasteners. 2. ee Reference ection for available paint colors. 4/17/15 Page T11-3
4 quare Pedestal Bases Iron Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s PB-5334 and PB-5335 cast aluminum square bases are FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism. quare Base Assembly, Iron w/ Iron oor PB et crews 1=1 Hex Bolt 3=3 et crews - - GLV=Galvanized quare Base Assembly, Iron w/ Iron oor PB et crews 1=1 Hex Bolt 3=3 et crews - - GLV=Galvanized Note: Buy American Certification available upon request at time of order. 13-3/ min max. Note: 1. All assemblies are supplied standard with stainless fasteners. 2. ee Reference ection for available paint colors. Page T11-4 4/17/15
5 Octagonal Pedestal Bases Aluminum Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s PB-5334 and PB-5335 cast aluminum square bases are FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism. Octagonal Base Assembly, Alum w/ Alum oor PB et crews 1=1 Hex Bolt 4=4 et crews - - Octagonal Base Assembly, Alum lip Fit w/ Alum oor PB / min max. Note: 1. All assemblies are supplied standard with stainless fasteners. 2. ee Reference ection for available paint colors. 6/15/16 Page T11-5
6 Octagonal Pedestal Bases Iron Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s PB-5334 and PB-5335 cast aluminum square bases are FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism. Octagonal Base Assembly, Iron w/ Iron oor PB et crews 1=1 Hex Bolt 4=4 et crews - - GLV=Galvanized 17-3/ min max. Note: 1. All assemblies are supplied standard with stainless fasteners. 2. ee Reference ection for available paint colors. Page T11-6 6/15/16
7 Pedestal Bases Pelco offers aluminum, iron, and plastic bases in various sizes as well as poles in aluminum and steel. Pelco s PB-5334 and PB-5335 cast aluminum square bases are FHWA certified and meets or exceeds AAHTO break-away requirements. Plastic replacement doors offer an economical way to deter vandalism. 22-5/8 19- O PB-5303-PNC 2-Piece Base for 4-1/2 O Pole, Plastic Note: High ensity Crosslinkable Polyethylene Pedestal Pole Base. Complete with all hardware. No anchor bolts required. PB-5328-PNC 2-Piece Reducer, Alum Note: 2-Piece Aluminum Reducer for PB-5303-PNC Base. (Reduces 4-1/2 O to 3-1/2 O) PB-5304-GLV Flange Base, 4-8NPT, Galv Iron 9-1/8 1- Note: Heavy uty Galvanized Iron Flange Base. Three 13/16 mounting holes. On 7-1/4 bolt circle. Typical Application 2-Piece quare Cover, Alum 5-1/4 16 PB Pole iameter 4.5=4.5 O 8=8 O - Note: 2-Piece Aluminum quare Cover. For 4-1/2-8 O Pole (15 Max. Bottom Opening). Complete with all hardware. 4/17/15 Page T11-7
8 Pole & Arm Caps Pelco offers pole and arm caps in various sizes in both aluminum and steel. Caps for 4-1/2 O posts are available in aluminum and AB plastic. Pole Cap, Acorn Type, Alum, 3 O Pole PB Pole Cap, Acorn Type, Alum, 3-1/2 O Pole PB Pole Cap, Acorn Type, Alum, 4-1/2 O Pole PB Pole Cap, ome Type, Alum, 4-1/2 O Pole PB Note: 1. All assemblies are supplied standard with stainless fasteners. 2. ee Reference ection for available paint colors. Page T /1/15
9 Pole & Arm Caps Pelco offers pole and arm caps in various sizes in both aluminum and steel. Caps for 4-1/2 O posts are available in aluminum and AB plastic. Pole & Arm Cap, Alum AP AP AP to 3-1/2 O Pole 3 to 4 O Pole 4-3/16 to 5-3/16 O Pole AP /16 to 6-3/16 O Pole AP /8 to 7-1/8 O Pole AP /16 to 8-1/4 O Pole AP AP /16 to 9-3/16 O Pole 9-7/16 to 10-7/16 O Pole Note: 1. All assemblies are supplied standard with stainless fasteners. 2. ee Reference ection for available paint colors. 11/1/15 Page T11-9
10 Pole & Arm Caps Pelco offers pole and arm caps in various sizes in both aluminum and steel. Caps for 4-1/2 O posts are available in aluminum and AB plastic. AP AP AP Pole iameter Pole & Arm Cap, Alum 10-11/16 to 11-11/16 O Pole Pole & Arm Cap, Alum 11-7/8 to 12-11/16 O Pole = O 14.25= O 15.25= O 16.25= O 17.25= O 18.25= O 19.25= O 20.25= O 21.25= O 22.25= O 23.25= O 24.25= O Pole Cap, teel H Post Top Cap, 4 (4-1/2 O Pole) for Extruded ign Blade, Alum H Post Top Cap, 4 (4-1/2 O Pole) for Flat ign Blade,, Alum AP-0805-PNC AP-0806-PNC Pole Cap, AB Plastic for up to 4 O Pole Pole Cap, AB Plastic for up to 5 O Pole Note: 1. All assemblies are supplied standard with stainless fasteners. 2. pecify options when ordering. 3. ee Reference ection for available paint colors. Page T /1/15
11 Collars & Adapters Pole and base collar assemblies, for both square and octagonal bases, are available in highwind areas to add strength and help prevent loosening of connection. Pole & Base Collar Assembly, Alum quare Base PB Pole & Base Collar Assembly, Alum Octagonal Base PB Pedestal Adapter, 4 (4-1/2 O Pole), Alum 6-1/2 Bolt Circle E Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. pecify options when ordering. 3. ee Reference ection for available paint colors. 4/1/15 Page T11-11
12 Anchor Bolt ets Pelco s galvanized anchor bolt sets are available in a variety of sizes. AP-1046-GLV Anchor Bolt et of 4 w/ Hardware 1/2-13NC x 7-1/2, Galv Note: Includes 4 Bolts, 8 Washers, and 8 Nuts. PB-5305-GLV Anchor Bolt et of 3 w/hardware 3/4-10NC x 18, Galv Note: Includes 3 Bolts, 6 Washers and 6 Nuts. PB-5306-GLV Anchor Bolt et of 4 w/ Hardware 3/4-10NC x 18, Galv Note: Includes 4 each: Bolts, Washers and Nuts. PB-5518-GLV Anchor Bolt et of 4 w/ ouble Hdwr 3/4-10NC x 18, Galv Note: Includes 4 Bolts, 8 Washers and 8 Nuts. PB-5371-GLV Anchor Bolt et of 4 w/ Plate Washers 3/4-10NC x 18, Galv Includes 4 Bolts, 4 Plate Washers, 4 Washers, and 4 Nuts. Note: 1. All assemblies are supplied standard with galvanized fasteners. Anchor Bolt et of 4 w/ Hardware 1-8NC x 36, Galv AP Template -GLV 1=12 Bolt Circle 2=12.75 Bolt Circle 3=11 Bolt Circle Includes 4 Bolts, 4 Lock Washers, 8 Washers, and 8 Nuts. Page T /1/15
13 Anchor Bolt Cages Anchor bolt cages allow the critical bolt circle dimensions to be maintained when the steel is cast into the concrete. These cages may be used instead of anchor bolt sets. AP-1049-GLV Anchor Bolt Cage, 1/2-13NC x 7-1/2 5-1/2 Bolt Circle, 36 Rebar, Galv AP-1089-GLV Anchor Bolt Cage, 3/4-10NC x /2 Bolt Circle, 36 Rebar, Galv 2 Projection Typical Footing etail 3½ Projection Anchor Bolt Cage Ground Concrete Anchor Bolt Cage Ground Concrete Typical Footing etail AP-1095-GLV Anchor Bolt Cage, 3/4-10NC x Bolt Circle, 36 Rebar, Galv 3¼ Projection Anchor Bolt Cage Ground Concrete Typical Footing etail Note: 1. All assemblies are supplied standard with galvanized fasteners. 2. Footing shall be determined by end user. 11/1/15 Page T11-12a
14 Anchor Bolt Cages Anchor bolt cages allow the critical bolt circle dimensions to be maintained when the steel is cast into the concrete. These cages may be used instead of anchor bolt sets. AP-3136-GLV Anchor Bolt Cage, 1-8NC x Bolt Circle, Galv 4 Projection Typical Footing etail Anchor Bolt Cage Ground Concrete AP-3129-GLV Anchor Bolt Cage, 1-8NC x Bolt Circle, Galv 4 Projection Anchor Bolt Cage Ground Concrete Typical Footing etail Note: 1. All assemblies are supplied standard with galvanized fasteners. 2. Footing shall be determined by end user. Page T11-12b 11/1/15
15 Pole & Base Accessories Pelco offers various accessories for pedestal bases from grounding lugs to plastic hand hole covers. PB-5323-PNC w/ Mounting Hardware PB-0532-PNC Anchor Bolt Adapter, Alum PB-0602-GLV him, 1/16 x 2 x 2, teel, Galv PB-0603-GLV him, 1/8 x 2 x 2, teel, Galv PB-0550-PNC Template, AB Plastic 13 Bolt Circle for quare and Octagonal Bases PB-5356-PNC Universal Hand Hole Cover, AB Plastic fits 2-3/4 x 4-1/2 to 5 x 8 Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. pecify options when ordering. 4/1/15 Page T11-13
16 Plastic Replacement oors Plastic replacement doors for lighting pole bases are fabricated from tough hi-density UV inhibited plastic which offers excellent impact resistance. They give the appearance of aluminum, never needing painted and are a significant deterrent to vandalism since they have no scrap value. Pelco s doors withstand temperature extremes of -78 o to +150 o fahrenheit. H TW BW Transformer oor, Plastic PB *BAE MFG ECRIPTION Valmont, Flat Base Manufacturer *ee Chart Union Metal, Flat - PNC 12-5/8 13- L T oor Latch H OOR IZE H TW BW 13-3/ / /64 9-1/4 HOLE LATCH L H T N/A N/A N/A N/A N/A N/A TW *BAE MFG ECRIPTION Valmont-Akron, Flat (TB-1AF, TB-2AF, TB-3AF) 1/4 13-1/2 OOR IZE H TW BW 13-1/4 9-1/8 9-1/2 HOLE LATCH L H T N/A N/A N/A H 07 A.B. Chance, Flat /8 9-1/ /16 N/A N/A N/A 12 Hapco, Flat (56631, 56632) 13-5/8 13-7/16 9-1/8 9-5/8 N/A N/A N/A BW 19 P & K, C-98612, Flat (M-81) 16-21/ /2 10-1/2 13-1/2 11/32 N/A N/A N/A TW *BAE MFG ECRIPTION OOR IZE H TW BW HOLE LATCH L H T 01 Kaiser, Curved w/ Latch 13-3/4 14-7/8 10-5/8 11-3/4 11/32 4-5/8 1-3/4-18 H P & K, Flat w/ Latch (TB2A, TB2C, TB5C) Akron, Flat w/ Latch (TB-20) 1/4 1/4 11-7/ /4 8-1/ /8 9-5/8 11/32 3-1/4 1-3/ /8 1/4-20 BW Akron, Flat hort w/ Latch (TB-17) Akron, Curved w/ Latch (FP-5190) 11-1/ /32 9-1/8 9-5/ /2 9-1/2 11/ /8 1/ /4 1-3/4-18 TW H *BAE MFG 10 ECRIPTION P & K, Flat w/ Latch (REVERE OPENING TB-1, TB-2) 9/16 12 OOR IZE H W BW /8 HOLE 11/32 LATCH L H T 3-1/4 1-3/4-18 BW Note: 1. All assemblies are supplied standard with stainless fasteners. 2. oors w/latches include latch & vandal-resistant screw. oors without latches are shipped without hardware. 3. pecify options when ordering. Page T /1/15
17 Plastic Replacement oors Plastic replacement doors for lighting pole bases are fabricated from tough hi-density UV inhibited plastic which offers excellent impact resistance. They give the appearance of aluminum, never needing painted and are a significant deterrent to vandalism since they have no scrap value. Pelco s doors withstand temperature extremes of -78 o to +150 o fahrenheit. H H TW BW TW BW *BAE MFG 11 *BAE MFG ECRIPTION Valmont, Flat FAB, Flat ECRIPTION P & K, Flat hort w/ Latch (TB-4) / /8 OOR IZE H W BW 11-1/8 9-9/ /8 OOR IZE H TW BW 13-7/ /4 13-5/8 8-1/2 9-3/4 HOLE 11/32 HOLE LATCH L H T 3-1/4 1-3/4-18 LATCH L H T N/A N/A N/A N/A N/A N/A TW H *BAE MFG ECRIPTION OOR IZE H W BW HOLE LATCH L H T 18 Akron, Flat, Hinged w/ Latch (REVERE OPENING TB-17H) N/A 10-3/ /8 9-1/8 9-11/ /8 1/4-20 BW TW H *BAE MFG 24 ECRIPTION Union Metal, Flat w/ Latch 3- OOR IZE H W BW 13-3/4 7-59/64 9-1/4 HOLE 13/32 LATCH L H T 3-11/16-16 BW TW H *BAE MFG ECRIPTION OOR IZE H W BW HOLE LATCH L H T BW 14 P & K, Curved, mall w/ Latch (HB-6) 7/32 4-1/2 5-1/4 5-3/16 6 9/ /8 1/4-20 Note: 1. All assemblies are supplied standard with stainless fasteners. 2. oors w/latches include latch & vandal-resistant screw. oors without latches are shipped without hardware. 4/1/15 Page T11-15
18 Transformer Bases Pelco s Transformer bases stand 17 tall and comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers. Transformer Base, TB2-17, Alum w/ Pelco oor & Galvanized Washers PB Top Bottom BC Top & Bottom Transformer Base, TB1-17, Alum w/ Pelco oor & Galvanized Washers PB Top 10½ -13½ Top BC Bottom Bottom BC Note: 1. ee Reference ection for available paint colors. Page T /1/15
19 Transformer Bases Pelco s Transformer bases stand 17 tall and comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers. Transformer Base, TB1-17 Modified, Alum w/ Pelco oor & Galvanized Washers PB ½ -13½ Top BC Top Bottom 10½ /16 Bottom BC Hardware Kit, Transformer Base 1-8NC x 4, et of 4, Galvanized PB-5437-GLV Note: For mounting base plates to the top oftransformer Bases. Includes 4 Hex Head Bolts, 8 Washers, 4 Lock Washers, and 4 Hex Nuts. Note: 1. ee Reference ection for available paint colors. 11/1/15 Page T11-17
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
TRAFFIC ACCESSORIES. GPL Geometrically Programmed Louvers
GPL Geometrically Programmed Louvers The Pelco GPL is a precisely aimed and controlled traffic signal louvering system. Drivers see a full circle of bright projected light when they are within the preset
1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Astro Sign-rac Overhead Street Name Signs Stellar Series A-0502 Sign Clamp AS-3004 AS-3009 Astro Sign-rac, Stellar and Mount for Overhead Street Name Signs AS-0128 - - - and and : 29, 36, 42, 48, 56, 72,
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
F-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
CAMERA MTGS. Astro-Brac 1-Piece Camera Bracket Stellar Series
Astro-Brac 1-Piece Camera Bracket Stellar Series AS-3004 SH-0514 SH-0514 Stellar Series Mount, Alum AS-0170 - - - 46=46 : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify by including -SS in the part number,
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
REQUEST FOR QUOTE. Material $ Labor/Installation $ tax $ Total $ Material $ Labor/Installation $ tax $ Total $
REQUEST FOR QUOTE Specifications- Knightdale Station Park Naming Rights Exterior Signage General Conditions 1. Delivery of signs to be within 6 weeks of order confirmation. 2. Shop drawings are required
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
STIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 [email protected] in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
OWNER S MANUAL Table Tennis Table Patent Pending
OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
Small Flat Panel Lift Arm FSA-1004 and KSA-1004
I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows
TS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
INSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech
AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech Components 1 Sky Commander Digital Setting Circle Computer 2 Encoders 10,000 step 1 Sky Commander Digital Setting Circle Manual
Brackets and Tenons. Product Specifications. PB Series
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
SPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
IKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-125-35M 35 Mast Extension (Optional) EZ-125-SK Stake Kit (Optional) EZ-46-3 Tar Pad Kit (Optional) EZ-GWA Guy Wire Kit (Optional) Ambient Weather
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
AZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,
Power Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
ROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
This mount uses concrete parking bumpers and a Davis tripod to create a mounting solution for nonpenetrable
NON-PENETRATING FLAT ROOF MOUNT Application Note 18 For Any Davis Weather Station Installed on a Mounting Tripod Introduction This application note describes various mounting solutions for non-penetrable
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
SSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
STB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
2. Division 05 Structural Steel Framing for steel framework requirements
SECTION 131200 - CLIMBING WALLS PART 1 GENERAL 1.1 SUMMARY A. This section includes the following: 1. GFRC Rock Realistic Climbing Wall System B. Related Sections 1. Division 04 Unit Masonry 2. Division
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 [email protected]. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: [email protected] 1160F Aluminum Corner
Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
RadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
SECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
Mounting Tripod Kit Installation Manual
Mounting Tripod Kit Installation Manual For use with Davis s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installation. The tripod supports the Integrated Sensor Suite
SECTION 15410 GROUND WATER STORAGE TANKS
SECTION 15410 GROUND WATER STORAGE TANKS PART 1 GENERAL.01 SCOPE A. Section Includes Requirements for designing, fabricating, and erecting a welded steel ground storage tank..02 SYSTEM DESCRIPTION A. Design
1-800-523-6279 www.wescottsauto.com Door & Deck Hardware N Bear Jaw Door Latches, cont
1-800-523-6279 www.wescottsauto.com Door & Deck Hardware N Bear Jaw Door Latches, cont Door and Deck Hinges Bear Jaw Latch Linkage: Linkage Rods 5/32 rod. Must be cut to length and a 90 degree bend put
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
ANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005
Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005 For ease of installation and continued enjoyment of your Andersen product,
-1- SPECIFICATIONS 002085 CONE SETTER PLATFORM ATTACHMENT INDEX
-1-002085 CONE SETTER PLATFORM ATTACHMENT INDEX I. GENERAL EQUIPMENT : A. Intent Statement B. Cone Setter Platform II. III. 1. Understructure Frame 2. Mounting Components 3. Paint 4. Basket 5. Labels 6.
POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents
-J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English
VXT. Open Cooling Towers. Open Cooling Towers. Product Detail VXT - B 1. Engineering Data... B2. Structural Support... B6
- B 1 Product Detail Engineering Data... B2 Structural Support... B6 Engineering Specifications... B9 - B 2 Engineering Data REMARK: Do not use for construction. Refer to factory certified dimensions &
CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions
Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS GENERAL DESCRIPTION:
WATER & SEWER CORROSIVE RESISTANT PRODUCTS
WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING
ELEC ELE TR CTRIC P IC PRODUCTS RODUCT
ELECTRIC PRODUCTS VCEP-1 ELECTRIC PRODUCTS MODEL SB STANDARD SBF SBT SB FEATURES SBST - Bottom intake, slope discharge SBT - Bottom intake, top discharge SBF - Front intake, top discharge Two piece all
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
DB 18 & DB 18E Options
DB 8 & DB 8E Options Assembly Manual Boom Truss Element Truss 6m Passive Inventory check DB 8 & DB 8 E Boom Truss Kit 7-004-0 QTY Part # Description 6 60-0045 /6 wire clips 4 60-0048 /6 Thimble 4 60-0044
ReachFree ID Installation Instructions For Portal TI, Sentinel and C-Start. Unitec www.startwithunitec.com
ReachFree ID Installation Instructions For Portal TI, Sentinel and C-Start Unitec www.startwithunitec.com Proprietary Information and Materials of Unitec, Inc. Such proprietary information and materials
C554 Series ADJUSTABLE HEIGHT. Version 3
C554 Series ADJUSTABLE HEIGHT GOAL SYSTEM Version 3 Thank you and congratulations for purchasing a Ryval Hoops Goal - the finest basketball goal system on the market today! You will discover that Ryval
WHAT S DIFFERENT. about TimberTech CableRail? Covered under warranty by ONE trusted manufacturer. Saves TIME and EFFORT
WHAT S DIFFERENT about TimberTech CableRail? Covered under warranty by ONE trusted manufacturer Consumers want project simplicity. Offer them the added luxury by building high-end custom cable railing
BIS Metal Pipe Clamps with Lining
A BIS Metal Pipe Clamps with Lining BIS Clamps BISMAT Flash BISMAT 2000 Ø ¼ - 2" BISMAT 2000 Ø 2½ - 4" 2 3 4 BIS Industrial Clamps BIS Heavy Duty Clamps HD1501 (1/2") (BUP1000) 5 BIS Clamps for Plastic
Secure your IT equipment with confidence... secure with NetClosure
Secure your IT equipment with confidence... secure with NetClosure SERVER CABINETS NetClosure s REM Series Server Cabinet is the ultimate solution designed and engineered for demanding data center environments.
GEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
Ceiling Mounted Folding Attic Ladders Installation Instructions
Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:
American National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com
System Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com Christensen Manufacturing Corp., Pennington, NJ 08534 System Modular Truck Equipment Tradesman Package SPECIAL SAVE
WHAT S DIFFERENT ABOUT OUR CABLERAIL?
WHAT S DIFFERENT ABOUT OUR CABLERAIL? Manufactured for use with: Covered under warranty by ONE trusted manufacturer Consumers want project simplicity. Offer them the added luxury by building high-end custom
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
Please Do Not Return This Product To The Store!
O W N E R ' S MODEL NO. M A N U A L B0F B0W CV60 BASKETBALL SYSTEM. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be
SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
CRASH RAIL INSTALLATION HEIGHT
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
INDUSTRIAL & COMMERCIAL DOOR HARDWARE
C R O W N I N D U S T R I A L INDUSTRIAL & COMMERCIAL DOOR HARDWARE "BARN DOOR HARDWARE" SLIDE DOOR HARDWARE SWING DOOR HARDWARE SLIDE-FOLD DOOR HARDWARE 213 MICHELLE COURT SOUTH SAN FRANCISCO, CA 94080
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Owner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
CLEANOUT FEATURES. KLEENATRON II Features CLEANOUTS
CLEANOUT FEATURES KLEENATRON II Features JOSAM KLEENATRON II Cleanouts incorporate features developed to meet the latest in building construction methods. These features ensure the specifier, installer
Sash Replacement Guide
for Andersen 200/400 Series Awning Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete this procedure, call Andersen at 1-888-888-7020
INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS
CU-101 DECEMBER 3, 2015 INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS APPLICATION The FIREYE fiber optic scanners have been designed for installation on burners where movable vanes,
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
In-Ground Basketball System Owners Manual
In-Ground Basketball System Owners Manual Customer Service Center N53 W4700 South Corporate Circle Sussex, WI 53089 U.S.A. Write Model Number From Box Here: WARNING! 3 Capable Adults REQUIRED TOOLS AND
Please Do Not Return This Product to the Store!
MODEL NO. B400W GS60 BASKETBALL SYSTEM O W N E R ' S M A N U A L 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be
SRA-125/SRAX-125 Double-Rail Lift-Out Rail System Installation & Service Manual with Parts List
SRA-125/SRAX-125 Double-Rail Lift-Out Rail System Installation & Service Manual with Parts List For MG, WG, WGL, and Grinder Pumps for Effluent & Sewage CAUTION! Read these safety warnings first before
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: [email protected]
Fisher 249 Caged Displacer Sensors
Instruction Manual 249 Caged Sensors Fisher 249 Caged Displacer Sensors Contents Introduction... 1 Scope of Manual... 1... 2 Type Number... 3 Educational Services... 4 Maintenance... 4 Cleaning the Cage...
Fittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
