UNISONIC TECHNOLOGIES CO., LTD
|
|
|
- Georgina O’Brien’
- 7 years ago
- Views:
Transcription
1 UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL-EFFECT FOR HIGH-TEMPERARURE OPERATION DESCRIPTION U18 is a semiconductor integrated circuit utilizing the Hall effect. It has been so designed as to operate in the alternating magnetic field especially at low supply voltage and operation over extended temperature ranges to +125.This Hall IC is suitable for application to various kinds of sensors, contact less switches, and the like. FEATURES 1 SIP-3 * Wide supply voltage range of 2.5V to V * Wide temperature operation range of - ~+125 * Alternating magnetic field operation * TTL and MOS IC are directly drivable by the output * The life is semipermanent because it employs contact less parts * SIP-3 package APPLICATION *Pb-free plating product number: U18L * Speed sensor * Position sensor * Rotation sensor * Contact-less sensor * Motor control * Built-in protection diode ORDERING INFORMATION Order Number Pin Assignment Package Packing Normal Lead Free Plating U18-G3-K U18L-G3-K SIP-3 I G O Bulk Note: Pin Assignment: I:V CC O:V OUT G:GND U18L-G3-K (1)Packing Type (2)Package Type (3)Lead Plating (1) K: Bulk (2) G3: SIP-3 (3) L: Lead Free Plating, Blank: Pb/Sn 1 of 6 Copyright 5 Unisonic Technologies Co., Ltd
2 MARKING INFORMATION SIP-3 U18 L: Lead Free Plating, Blank: Pb/Sn BLOCK DIAGRAM REGULATOR Vcc Output Hall element Amplifier Schmidt trigger Output stage GND UNISONIC TECHNOLOGIES CO., LTD 2 of 6
3 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATING UNIT Supply Voltage V CC 2.5V ~ V V Supply Current I CC 1 ma Circuit Current I OUT ma Power Dissipation P D 4 mw Operating Temperature T OPR -~+125 Storage Temperature T STG -4~+15 Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The device is guaranteed to meet performance specification within ~+7 operating temperature range and assured by design from -~+125. ELECTRICAL CHARACTERISTICS (Ta=25) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Low-Level Output Voltage V OL V CC =16V,I OUT =12mA,B=mT.7 V V CC =3.6V,I OUT =12mA,B=mT.7 V Output Leakage Current I O(LEAK) V CC =16V,B=-mT 1 1 µa Output Short Circuit Current -Ios V CC =16V,V OUT =V,B=-mT.8 ma Supply Current I CC V CC =16V 6 ma V CC =3.6V 5.5 ma MAGNETIC CHARACTERISTICS Operate Point B OP At Ta = mt Release Point B RP At Ta = mt Hysteresis B HYS At Ta = mt Note 1.B OP = operate point (output turns ON ); B RP = release point ( output turns OFF); B HYS = hysteresis (B OP B RP ).As used here, negative flux densities are defined as less than zero (algebraic convention). Typical values are at Ta = +25 and VCC = 12V. 2.1mT=1 gauss UNISONIC TECHNOLOGIES CO., LTD 3 of 6
4 PACKAGE INFORMATION 4.1 mm.95 mm 2.1 mm 3. mm Fig. 1 SENSOR LOCATIONS Marked face Fig. 2 APPLYING DIRECTION OF MAGNETIC FLUX UNISONIC TECHNOLOGIES CO., LTD 4 of 6
5 TYPICAL CHARACTERISTICS Temperature vs. Magnetic field Voltage vs. Magnetic field Magnetic field ( G ) Temperature ( C ) 125 Bop Brp BW Magnetic field ( G ) Bop Brp BW Temperature vs. Icc Voltage vs. Icc Current ( ma ) Icc Current ( ma ) Icc Temperature ( C ) Temperature vs. Sink Voltage vs. Sink Sink (ma) 31 Sink Sink (ma) Sink Temperature ( C ) UNISONIC TECHNOLOGIES CO., LTD 5 of 6
6 TYPICAL CHARACTERISTICS(Cont.) Switch Points Hysteresis Switch Point IN Gauss Hysteresis IN Gauss Output Sink Current Supply Current Sink Current IN ma Supply Current IN ma Output Sink Current Vin - Icc Current ( ma ) Input Current ( ma ) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD 6 of 6
S-57M1 Series HIGH-SPEED BIPOLAR HALL EFFECT LATCH. Features. Applications. Package. www.sii-ic.com
www.sii-ic.com HIGH-SPEED BIPOLAR HALL EFFECT LATCH SII Semiconductor Corporation, 2011-2013 Rev.1.2_01 The, developed by CMOS technology, is a high-accuracy Hall IC that operates with a high-sensitivity,
COMPLEMENTARY OUTPUT HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with output driver designed for electronic commutation of brushless DC motor applications. The device includes an onchip Hall sensor for magnetic sensing,
S-57P1 S Series FOR AUTOMOTIVE 150 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH. Features. Applications.
www.sii-ic.com FOR AUTOMOTIVE 150 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH SII Semiconductor Corporation, 2015 The, developed by CMOS technology, is a high-accuracy Hall
DISCONTINUED PRODUCT
www.sii-ic.com BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC Seiko Instruments Inc., 2008-2010 Rev.3.0_00 The, developed by CMOS technology, is a Hall IC with a high-sensitivity and operates on a low current.
UNISONIC TECHNOLOGIES CO., LTD
UPS61 UNISONIC TECHNOLOGIES CO., LTD HIGH PERFORMANCE CURRENT MODE POWER SWITCH DESCRIPTION The UTC UPS61 is designed to provide several special enhancements to satisfy the needs, for example, Power-Saving
UNISONIC TECHNOLOGIES CO.,LTD
TDA UNISONIC TECHNOLOGIES CO.,LTD +W STEREO AMPLIFIER FOR CAR RADIO DESCRIPTION The UTC TDA is a class B dual audio power amplifier and is designed for car radio applications. HZIP-11 FEATURES * Low distortion.
UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET
UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast
INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30
INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption
MICROPOWER, GENERAL-SENSITIVE HALL EFFECT SWITCH
Description The micro power Omni-polar Effect switch IC designed for portable and battery powered equipment such as cellular phones, PDA s and portable PC s. Based on two sensitive Effect plates and chopper
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
MM74HC14 Hex Inverting Schmitt Trigger
MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as
Hardware Documentation. Data Sheet HAL 202. Hall-Effect Sensor. Edition Sept. 18, 2014 DSH000159_002EN
Hardware Documentation Data Sheet HAL 202 Hall-Effect Sensor Edition Sept. 18, 2014 DSH000159_002EN HAL202 Copyright, Warranty, and Limitation of Liability The information and data contained in this document
4-bit binary full adder with fast carry CIN + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = = S1 + 2S2 + 4S3 + 8S4 + 16COUT
Rev. 03 11 November 2004 Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The is specified in compliance
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
LB1836M. Specifications. Monolithic Digital IC Low-Saturation Bidirectional Motor Driver for Low-Voltage Drive. Absolute Maximum Ratings at Ta = 25 C
Ordering number : EN397F LB136M Monolithic Digital IC Low-Saturation Bidirectional Motor Driver for Low-Voltage Drive http://onsemi.com Overview The LB136M is a low-saturation two-channel bidirectional
TD62783APG,TD62783AFG
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic TD62783APG,TD62783AFG TD62783APG/AFG 8 ch High-Voltage Source Driver The TD62783APG/AFG Series are comprised of eight source current Transistor
TEA1024/ TEA1124. Zero Voltage Switch with Fixed Ramp. Description. Features. Block Diagram
Zero Voltage Switch with Fixed Ramp TEA04/ TEA4 Description The monolithic integrated bipolar circuit, TEA04/ TEA4 is a zero voltage switch for triac control in domestic equipments. It offers not only
INTEGRATED CIRCUITS DATA SHEET. SAA1064 4-digit LED-driver with I 2 C-Bus interface. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET 4-digit LED-driver with I 2 C-Bus interface File under Integrated Circuits, IC01 February 1991 GENERAL DESCRIPTION The LED-driver is a bipolar integrated circuit made in
Tone Ringer SL2410 LOGIC DIAGRAM PIN ASSIGNMENT SLS
Tone Ringer The SL2410 is a bipolar integrated circuit designed for telephone bell replacement. Designed for Telephone Bell Replacement Low Curent Drain Adjustable 2-frequency Tone Adjustable Warbling
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
TLI4946. Datasheet TLI4946K, TLI4946-2K, TLI4946-2L. Sense and Control. May 2009
May 2009 TLI4946 High Precision Hall Effect Latches for Industrial and Consumer Applications TLI4946K, TLI4946-2K, TLI4946-2L Datasheet Rev. 1.0 Sense and Control Edition 2009-05-04 Published by Infineon
INTEGRATED CIRCUITS. 74F153 Dual 4-line to 1-line multiplexer. Product specification 1996 Jan 05 IC15 Data Handbook
INTEGRATED CIRCUITS 1996 Jan 05 IC15 Data Handbook FEATURES Non-inverting outputs Separate enable for each section Common select inputs See 74F253 for 3-State version PIN CONFIGURATION Ea 1 S1 2 I3a 3
KA7500C. SMPS Controller. Features. Description. Internal Block Diagram. www.fairchildsemi.com
SMPS Controller www.fairchildsemi.com Features Internal Regulator Provides a Stable 5V Reference Supply Trimmed to ±1% Accuracy. Uncommitted Output TR for 200mA Sink or Source Current Output Control for
.LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M74HC154 4 TO 16 LINE DECODER/DEMULTIPLEXER. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V
. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) at T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.) OUTPUT DRIVE CAPABILITY 15 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE
3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) DG2301 ishay Siliconix DESCRIPTION The DG2301 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,
AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,
unit:mm 3006B-DIP16 0.71 2.54 0.48
Ordering number:enn505g Monolithic Linear IC LA3361 PLL FM Multiplex Stereo Demodulator Overview The LA3361, PLL FM multiplex stereo demodulator, is designed for low supply voltage-use appliance such as
PI5C3244 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Features: Near-Zero propagation delay 5-ohm switches connect inputs to outputs when enabled Direct bus connection when switches are ON Ultra Low Quiescent Power (0.2µA Typical) Ideally suited for notebook
UNISONIC TECHNOLOGIES CO., LTD UC3863 LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD UC3863 LOW COST POWER-SAVING MODE PWM CONTROLLER FOR FLYBACK CONVERTERS DESCRIPTION The UC3863 is a high performance current mode PWM controller ideally suited for low standby
MM54C150 MM74C150 16-Line to 1-Line Multiplexer
MM54C150 MM74C150 16-Line to 1-Line Multiplexer MM72C19 MM82C19 TRI-STATE 16-Line to 1-Line Multiplexer General Description The MM54C150 MM74C150 and MM72C19 MM82C19 multiplex 16 digital lines to 1 output
A1301 and A1302. Continuous-Time Ratiometric Linear Hall Effect Sensor ICs DESCRIPTION FEATURES AND BENEFITS. Packages:
FEATURES AN BENEFITS Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimum performance Robust
The sensor can be operated at any frequency between DC and 1 MHz.
Rev. 6 18 November 2010 Product data sheet 1. Product profile 1.1 General description The is a sensitive magnetic field sensor, employing the magneto-resistive effect of thin film permalloy. The sensor
Zero Voltage Switch with Adjustable Ramp. R 2 (R sync ) 220 k (250 V~) Synchronization. Full wave logic Pulse amplifier. 58 k N
Zero Voltage Switch with Adjustable Ramp U217B/ U217B-FP Description The integrated circuit, U217B, is designed as a zerovoltage switch in bipolar technology. It is used to control resistive loads at mains
Detection of both poles, S pole or N pole Active "L", active "H" Nch open-drain output, CMOS output
S-5715 Series www.sii-ic.com HIGH-SPEED / MIDDLE-SPEED LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC SII Semiconductor Corporation, 2011-2012 Rev.2.3_01 The S-5715 Series, developed
EM3242. Angle Sensor IC [EM3242]
![EM3242. Angle Sensor IC [EM3242]](/thumbs/26/7602427.jpg "EM3242. Angle Sensor IC [EM3242]")
EM3242 Angle Sensor IC Applications Small absolute rotary encoder Small input device (mode selector, volume control, and soon) Potentiometer Rotary switch Features Si monolithic rotary position sensor
FAN8082 (KA3082N) Bi-directional DC Motor Driver. Features. Description. Typical Applications. Ordering Information. www.fairchildsemi.
Bi-directional DC Motor Driver www.fairchildsemi.com Features Built-in brake function for stable brake characteristics. Built-in element to absorb a surge current derived from changing motor direction
LOGIC DIAGRAM PIN ASSIGNMENT
TECNICAL DATA Tone Ringer IL2411N/D The IL2411 is a bipolar integrated circuit designed for telephone bell replacement. Designed for Telephone Bell Replacement Low Current Drain Adjustable 2-frequency
. HIGH SPEED .LOW POWER DISSIPATION .COMPATIBLE WITH TTL OUTPUTS M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. tpd = 9 ns (TYP.
M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. HIGH SPEED tpd = 9 ns (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =1µA (MAX.) AT T A =25 C.COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.) VIL = 0.8V (MAX) OUTPUT
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor
ULN2803APG,ULN2803AFWG,ULN2804APG,ULN2804AFWG (Manufactured by Toshiba Malaysia)
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic ULN2803,04APG/AFWG ULN2803APG,ULN2803AFWG,ULN2804APG,ULN2804AFWG (Manufactured by Toshiba Malaysia) 8ch Darlington Sink Driver The ULN2803APG
TLP521 1,TLP521 2,TLP521 4
TLP2,TLP2 2,TLP2 4 TOSHIBA Photocoupler GaAs Ired & Photo Transistor TLP2,TLP2 2,TLP2 4 Programmable Controllers AC/DC Input Module Solid State Relay Unit in mm The TOSHIBA TLP2, 2 and 4 consist of a photo
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
INTEGRATED CIRCUITS. NE558 Quad timer. Product data Supersedes data of 2001 Aug 03. 2003 Feb 14
INTEGRATED CIRCUITS Supersedes data of 2001 Aug 03 2003 Feb 14 DESCRIPTION The Quad Timers are monolithic timing devices which can be used to produce four independent timing functions. The output sinks
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter
Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TOSHIBA BiCD Integrated Circuit Silicon Monolithic PWM Chopper-Type bipolar Stepg Motor Driver IC The is a PWM chopper-type single-chip bipolar sinusoidal micro-step stepg motor driver. Forward and reverse
Fiber Optics. Integrated Photo Detector Receiver for Plastic Fiber Plastic Connector Housing SFH551/1-1 SFH551/1-1V
Fiber Optics Integrated Photo Detector Receiver for Plastic Fiber Plastic Connector Housing SFH551/1-1 Features Bipolar IC with open-collector output Digital output, TTL compatible Sensitive in visible
MM74HC273 Octal D-Type Flip-Flops with Clear
MM74HC273 Octal D-Type Flip-Flops with Clear General Description The MM74HC273 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise
TLP504A,TLP504A 2. Programmable Controllers AC / DC Input Module Solid State Relay. Pin Configurations (top view) 2002-09-25
TOSHIBA Photocoupler GaAs Ired & Photo Transistor TLP4A,TLP4A 2 TLP4A,TLP4A 2 Programmable Controllers AC / DC Input Module Solid State Relay Unit in mm The TOSHIBA TLP4A and TLP4A 2 consists of a photo
BIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc823tu SiGe:C LOW NOISE AMPLIFIER FOR GPS DESCRIPTION The μpc823tu is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise
FEATURES Temperature-compensated magnetics Miniature plastic package Low voltage: 3.8 V operation
DESCRIPTION The SS400F and SS400G Series sensors are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to
SN28838 PAL-COLOR SUBCARRIER GENERATOR
Solid-State Reliability Surface-Mount Package NS PACKAE (TOP VIEW) description The SN28838 is a monolithic integrated circuit designed to interface with the SN28837 PALtiming generator in order to generate
GP2Y0D810Z0F. Distance Measuring Sensor Unit Digital output (100 mm) type GP2Y0D810Z0F
GP2Y0D810Z0F Distance Measuring Sensor Unit Digital output (100 mm) type Description GP2Y0D810Z0F is distance measuring sensor unit, composed of an integrated combination of PD (photo diode), IRED (infrared
PINNING - TO220AB PIN CONFIGURATION SYMBOL
BTA4 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope, SYMBOL PARAMETER MAX. MAX. UNIT intended for use in applications requiring high bidirectional transient and
MM74HC174 Hex D-Type Flip-Flops with Clear
Hex D-Type Flip-Flops with Clear General Description The MM74HC174 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise immunity,
DISCRETE SEMICONDUCTORS DATA SHEET
DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D186 Supersedes data of 1999 Apr 23 2001 Oct 10 FEATURES High current (max. 1 A) Low voltage (max. 80 V). APPLICATIONS Audio and video amplifiers. PINNING
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply
74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information
Rev. 4 24 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal positive-edge triggered D-type flip-flop. The device features clock (CP)
Quad 2-input NAND Schmitt trigger
Rev. 9 15 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a quad two-input NAND gate. Each input has a Schmitt trigger circuit. The gate switches
Detection of both poles, S pole or N pole Active "L", active "H" Nch open-drain output, CMOS output
S-5712 Series www.sii-ic.com LOW VOLTAGE OPERATION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC SII Semiconductor Corporation, 2010-2016 Rev.4.6_00 This IC, developed by CMOS technology, is a high-accuracy
3-to-8 line decoder, demultiplexer with address latches
Rev. 7 29 January 2016 Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL). The is specified in compliance with JEDEC
DATA SHEET. BC875; BC879 NPN Darlington transistors DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 1999 May 28.
DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D186 Supersedes data of 1999 May 28 2004 Nov 05 FEATURES High DC current gain (min. 1000) High current (max. 1 A) Low voltage (max. 80 V) Integrated
AAV003-10E Current Sensor
Datasheet AAV003-10E Current Sensor Key Features For Low Current Detection On-Chip Current Strap for Precise Operation 80 ma to +80 ma Linear Range Sensitivity up to 2 mv/ma AC or DC Measurement Ultraminiature
BIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc8tk SiGe:C LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS DESCRIPTION The μpc8tk is a silicon germanium carbon (SiGe:C) monolithic integrated circuit
Semiconductor MSM82C43
Semiconductor MSM8C3 Semiconductor MSM8C3 INPUT/OUTPUT PORT EXPANDER GENERAL DESCRIPTION The MSM8C3 is an input/output port expander device based on CMOS technology and designed to operate at low power
Old Company Name in Catalogs and Other Documents
To our customers, Old Company Name in Catalogs and Other Documents On April 1 st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took
3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function.
Rev. 02 3 September 2007 Product data sheet 1. General description The provides a 3-input EXCLUSIVE-OR function. The input can be driven from either 3.3 or 5 V devices. This feature allows the use of these
MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop
3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicongate CMOS technology, which provides
.OPERATING SUPPLY VOLTAGE UP TO 46 V
L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
S101D01/S101D02 S201D01/S201D02
S1D1/S1D/S1D1/S1D S1D1/S1D S1D1/S1D 1-Pin DIP Type SSR for Low Power Control Features 1. Compact ( 1-pin dual-in-line package type). RMS ON-state current I T : 1.Arms 3. Built-in zero-cross (S1D, S1D ).
WT7527 PC POWER SUPPLY SUPERVISOR. Data Sheet. Version 1.20. June 22, 2007
偉 詮 電 子 股 份 有 限 公 司 WT7527 PC POWER SUPPLY SUPERVISOR Data Sheet Version 1.20 June 22, 2007 The information in this document is subject to change without notice. All Rights Reserved. 新 竹 市 科 學 工 業 園 區
1-of-4 decoder/demultiplexer
Rev. 6 1 April 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications The contains two 1-of-4 decoders/demultiplexers. Each has two address inputs (na0 and na1, an active
Infrared Remote Control Receiver Module IRM-2638T
Block Diagram 1 2 3 Features High protection ability against EMI Circular lens for improved reception characteristics Line-up for various center carrier frequencies. Low voltage and low power consumption.
DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers
September 1986 Revised April 2000 DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full
74AC138 74ACT138 1-of-8 Decoder/Demultiplexer
1-of-8 Decoder/Demultiplexer General Description The AC/ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The
DATA SHEET. TDA1543 Dual 16-bit DAC (economy version) (I 2 S input format) INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 February 1991 FEATURES Low distortion 16-bit dynamic range 4 oversampling possible Single 5 V power supply No external components required
WHITE LED STEP-UP CONVERTER. Features
General Description The is an inductor-based DC/DC converter designed to drive up to eight white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain
Low-power configurable multiple function gate
Rev. 7 10 September 2014 Product data sheet 1. General description The provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the
74HC02; 74HCT02. 1. General description. 2. Features and benefits. Ordering information. Quad 2-input NOR gate
Rev. 5 26 November 2015 Product data sheet 1. General description 2. Features and benefits The is a quad 2-input NOR gate. Inputs include clamp diodes. This enables the use of current limiting resistors
SP490/491 Full Duplex RS-485 Transceivers
SP490/491 Full Duplex RS-485 Transceivers FEATURES +5V Only Low Power BiCMOS Driver/Receiver Enable (SP491) RS-485 and RS-422 Drivers/Receivers Pin Compatible with LTC490 and SN75179 (SP490) Pin Compatible
LM2901. Low-power quad voltage comparator. Features. Description
Low-power quad voltage comparator Features Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of supply voltage
Optocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18
18 CHANNELS LED DRIVER GENERAL DESCRIPTION IS31FL3218 is comprised of 18 constant current channels each with independent PWM control, designed for driving LEDs. The output current of each channel can be
INTEGRATED CIRCUITS. 74F74 Dual D-type flip-flop. Product specification Supercedes data of 1990 Oct 23 IC15 Data Handbook.
INTEGRATED CIRCUITS Supercedes data of 1990 Oct 23 IC15 Data Handbook 1996 Mar 12 FEATURE Industrial temperature range available ( 40 C to +85 C) DESCRIPTION The is a dual positive edge-triggered D-type
74F257A Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State)
INTEGRATED CIRCUITS Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State) 1995 Mar 31 IC15 Data Handbook Philips Semiconductors Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State)
DM74LS151 1-of-8 Line Data Selector/Multiplexer
1-of-8 Line Data Selector/Multiplexer General Description This data selector/multiplexer contains full on-chip decoding to select the desired data source. The DM74LS151 selects one-of-eight data sources.
TOSHIBA Insulated Gate Bipolar Transistor Silicon N Channel IGBT GT60J323
GT6J2 TOSHIBA Insulated Gate Bipolar Transistor Silicon N Channel IGBT GT6J2 Current Resonance Inverter Switching Application Unit: mm Enhancement mode type High speed : t f =.6 μs (typ.) (I C = 6A) Low
HEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate
Rev. 6 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NAND gate. The outputs are fully buffered for the highest noise
74AC139 74ACT139 Dual 1-of-4 Decoder/Demultiplexer
Dual 1-of-4 Decoder/Demultiplexer General Description The AC/ACT139 is a high-speed, dual 1-of-4 decoder/ demultiplexer. The device has two independent decoders, each accepting two inputs and providing
logic level for RCD/ GFI applications
logic level for RCD/ GFI applications BT68 series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope, intended
DATA SHEET. TDA1518BQ 24 W BTL or 2 x 12 watt stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The is an integrated class-b output amplifier in a 13-lead single-in-line (SIL) plastic power package.
Discontinued Product For Reference Only
Data Sheet 29319.12A 2962 DUAL PULSE-WIDTH MODULATED CURRENT CONTROL GROUND IN A SENSE A SINK A SOURCE A THS A V CC SOURCE B SINKB SENSEB IN B THS B 1 2 3 4 5 6 7 8 9 1 11 12 LOGIC LOGIC Dwg. No. D-11
Digital-Output Magnetic Sensor (Hall IC)
TOSHIBA Semiconductor Application Note Digital-Output Magnetic Sensor (Hall IC) 1. Introduction The digital-output magnetic sensor is essentially a sensor which detects the magnetic flux density of a magnet
MC33064DM 5 UNDERVOLTAGE SENSING CIRCUIT
Order this document by MC3464/D The MC3464 is an undervoltage sensing circuit specifically designed for use as a reset controller in microprocessor-based systems. It offers the designer an economical solution
How To Control A Power Supply On A Powerline With A.F.F Amplifier
INTEGRATED CIRCUITS DATA SHEET Sound I.F. amplifier/demodulator for TV File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is an i.f. amplifier with a symmetrical FM demodulator and
Datasheet - DS0002 Indice Semiconductor Pty Ltd
Datasheet - DS0002 Indice Semiconductor Pty Ltd MR16 LED Driver IC INDICE0002 with Power and Active Temperature Management KEY FEATURES Input voltage range: 12 V DC / 12 V AC. Input frequency range from
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits