Price list (VAT inclusive)march 2015
|
|
- Evangeline Marshall
- 7 years ago
- Views:
Transcription
1 Price list (VAT inclusive)march 2015 *Prices correct at time of printing, not guaranteed for any fixed period. Please contact us by phone or fax or All major credit and debit cards accepted, including Paypal We are open for counter service weekdays from 8.30am to 12.30pm and 1.00pm to 5.00pm and often on Saturdays 9.00am to 12.00am (Please phone for a Saturday visit). Carriage rates Small orders, Less than 13" and Weight up to 1 Kg 4.80 Weights from 1 Kg to 5kg, up to 24" will be sent by carrier at a cost of 9.00 Weights 5k to 15k or longer than 24" are k plus are charged at 0.50p per kilo extra. Carriage charges for the Highlands & Islands, Isle of Man, Channel Islands and Export, quoted at time of order. Page 1
2 Terms of business, Pricing and Delivery. Payment. 1 Your remittance, or card details, should accompany any order sent by post, which should include your address and telephone number. 2 Payment is acceptable by all major credit/debit cards, cheque (subject to the usual conditions), postal orders and PayPal. 3 Cheques and postal orders made payable to M-Machine. 4 We require full card details for Debit/credit card payment (Please ring if unsure) Goods 1 Although care has been taken in the compiling of this catalogue, no liability can be accepted for any error. 2 On the rare occasions where damage or loss of goods in transit occurs, compensation may be paid after a satisfactory investigation. 3 Ideally, goods for mail order will be a maximum of 750mm in length, but please state if specific lengths above this are required, as we can supply lengths up to a maximum of 3M but with modification of carriage charge. 4 Goods will usually be despached within 10 working days or as soon as complete. Catalogue Prices 1 Unless otherwise stated, Lengths of material will be supplied plus or minus 2%. Please ensure you order sufficient to cover your FINISHED length. 2 Most prices are quoted as price per foot/300mm or per Inch/25mm. Please note that you can order the exact amount of material you need but requirments less than one inch/25mm will carry the 1 inch/25mm price and requirments less than one foot/300mm price band may carry one foot/300mm price. 3 We reserve the right to charge a minimum of 6.00 for goods on very small orders 4 Carriage charges will be applied as follows: Packages up to 1KG in weight will be sent by first class post with a minimum charge of 4.80, Packages between 1Kg to 5kgs will be sent by carrier at a cost of 9.00 Consignments weighing 5k to 15k at 12.00, >15k 0.50p per kilo extra. Any parcel exceeding 1.5metres in length will be subject to special rates. 5 VAT (at 20%) is included in all prices in this catalogue. Page 2
3 Diameters HE 30 (6082) Aluminium Price per foot/300mm Price per inch/25mm 3/16" /8" " " mm mm /8" /4" /4" " /4" /2" /16" /8" /2" " mm mm mm /2" /8" /4" /8" " /16" /8" /8" " mm /2" /4" " /2" mm mm " /16" /8" " mm /8" /4" /4" " mm /8" /2" " POA 3/4" mm / mm 3.54 Diameters 6262 (Free Machining) Price per foot/300mm Diameters 2014 HE15 3/8" 2.34 Price per foot/300mm Price per inch/25mm 10mm /8" POA 1-1/8" /16" /16" POA 1-1/4" /2" /4" /8" POA 5/8" /16" POA 1-1/2" /4" /8" /8" /16" /4" 2.52 Price per inch/25mm 1/2" /8" " /16" POA 2" /8" /8" /4" /4" /4" /2" /8" /8" POA 3 1/2" /2" " " /8" /4" /8" 1.63 H " /4" 2.28 Price per inch/25mm 2.1/2" /4" x 1/2" " X 2" mmx32mm " /8 X 1 3/ " x 4" mm x 13mm /4" /8 X 1 1/ " X 2-1/2" mm x 51mm /2" /4 X 1 1/ /2 x mm x 28mm / /4 X mmx51mm mmx400mm " " x 1" " x 4.5" " Thick /4 Thick 0.50 Flats HE30 Price Per Foot/300mm Price per inch/25mm 1/16" x 1/2" /16" x 11/4" /16" x 1" /2" x 3/4" /4" x 1 1/2" /16" x 3/4" /16" x 11/2" /16"x1.1/2" /2" x 1" /4" x 1 3/4" /16" x 1" /16" x 3" /16" x 2" /2" x 1 1/4" /4" x 2" /8" x 1/4" /16" x 4" /16" x 3" /2" x 1 1/2" /4" x 2-1/2" /8" x 3/8" /4" x 3/8" /16" x 4" /2" x 1 3/4" /4" x 3" /8" x 1/2" /4" x 1/2" /8" x 1/2" /2" x 2" /4" x 4" /8" x 5/8" /4" x 5/8" /8" x 5/8" /2" x 2-1/2" /4" x 5" /8" x 3/4" /4" x 3/4" /8" x 3/4" /2" x 3" /4" x 6" /8" x 1" /4" x 1" /8" x 1" /2" x 3-1/2" " x 1 1/4" mm x 25mm /4" x 11/4" /8" x 11/4" /2" x 4" " x 1 1/2" /8" x 11/4" /4" x 11/2" /8" x 1 1/2" /2" x 5" " x 1 3/4" /8" x 1 1/2" /4" x 13/4" /8" x 1 3/4" /2" x 6" " x 2" mm x 50mm mm x 50mm /8" x 2 " mm x 150mm " x 2 1/2" /8" x 1-3/4" /4" x 2" /8" x 2 1/2" /8"x3/4" " x 3" /8" x 2 " /4" x 21/2". 3/8" x 3" /8" x 1" " x 3 1/2" /8" x 2 1/2" /4" x 3" /8" x 4" /8" x 1 1/2" " x 4" /8" x 3" /4" x 31/2" /8" x 5" /8" x 2" " x 5" /8" x 4" mm x /8" x 6" /8" x 21/2" /4" x 2" mmx 100mm /4" x 4" /8" x 7" /8" x 3" /4" x 21/2" /8" x 6" /4" x 5" /8" x 8" /8" x 4" /4" x 3" /16" x 1/2" mm x /8" x 9" /8" x 6" /4" x 4" /16"x5/8" /4" x 6" /8" x /8"x12" /4" x 5" /16" x 3/4" /16" x 1/2" x /4" x 1 " /2" x 2" /16" x 1" /16" x 3/4" mm x /4" x 11/4 " /2" x 2 1/2" /2" x 3" /2" x 4" 2.45 If your requirements are not 2" X 3" 2.45 listed Please enquire. 2" x 2 1/2" " x 4" " x 5" " x 6" " x 4" 6.00 Page 3
4 Aluminium Squares HE30 Squares H15 Equal Angle HE 30 Price per foot Price per inch/25mm Price per foot/300mm 1/4" " sq /2 x 1/2 x 1/ /16" " sq /2" x 1/2" x 1/8" /8" mm x /8"x5/8"x1/16" /2" /4" x 3/4" x 1/16" /8" 3.19 Hexagons HE30 3/4" x 3/4" x 1/8" /8" 4.80 Price per foot 1" x 1" x 1/16" /4" /8" x 25 x " /2" " x 1" x 1/8" /8" "x 1" x 3/16" 1.68 Price per inch/25mm.710" /4" x 1 1/4" x 1/16" /4" mm /4" x 1 1/4" x 1/8" /2" 1.01 Price per inch 1 1/4" x 1 1/4" x 1/4" /4" /2" /2" x 1 1/2" x 1/16" " /2" x 1 1/2" x 1/8" /4" 2.40 T' Section 1 1/2" x 1 1/2" x 3/16" /2" 2.52 Price per foot/300mm 1 1/2" x 1 1/2" x 1/4" /4" "x1"x1/16" /4" x 1-3/4" x 1/8" mm "x1"x1/8" x 38 x 3mm " /4" x1-1/4"x1/ mm x 50mm x 3mm /2" /2"x1-1/2"x1/4" " x 2" x 1/8" " " x 2" x 3/16" 6.14 Channel section HE30 2" x 2" x 1/4" 7.13 Box section HE30 Price per foot/300mm 50 x 50 x6mm 6.60 Price per foot 1" x 1/2" x 1/8" /2" x 2 1/2" x 1/4" /4" x 3/4" x 16swg /4"x3/4"x1/8" " x 3" x 1/8" /4"x3/4"x1/8" " x 3/4" x 1/8" " x 3" x 1/4" " x 1" x 1/8"(10g) /2" x 3/4" x 1/8" " x 4" x 1/4" /2"x3/4"x16g /2" x 1" x 1/8" " x 1" x 1/8" mm x 25mm x Unequal Angle HE30 2"x1-1/2"x1/8" " x 1" x 1/8" 2.93 Price per foot/300mm 4" x 2" x 1/4" /4" x 1/2" x 1/8" /4" x 1/2" x 1/16" sq x16g /4"x3/4"x1/8" " x 1/2" x 1/16" sq x10g /4" x 1" x 1/8" " x 1/2" x 1/8" /4 sq x16g /4" x 1" x 1/8" " x 3/4" x 1/8" /4 sq x10g " x 1" x 1/8" /4" x 3/4" x 1/8" /2 sq x16g " x 1-1/2" x 1/8" /2" x 1/2" x 1/8" /2 sq x 1/8 " " x 2" x 1/8" /2"x1"x1/8" /4 x 1 3/4 x 1/ /2"" x 1" x 1/8" " x 1" x 1/8" x3 x1/ /2" x 1-1/2" x 3/16" " x 1" x 3/16" "x2"x1/4" " x 1" x 1/4" " x 2" x 3/16" " x 2" x1/4" 8.64 We are currently expanding the range of Aluminium sections including 'T' section. Please enquire. Page 4
5 Sheet & Plate 1050A Per sq foot/300mm Aluminium Sheet & Plate H15 Per sq foot/300mm 0.5mm mm mm mm Conversion Table 1.0mm /4 Th SWG INCH MM 1.2mm /2Th POA mm mm mm (14swg) /4"Th mm " Th mm mm 8.40 Treadplate mm Per Sq Foot/300mm mm mm mm mm swg (3mm) mm swg mm swg swg 5.40 Cast Tooling Plate. 19 swg 5.54 Per sq foot/300mm 20swg (.9mm) 3.00 *Dimensioned from plate POA 22swg (.71mm) swg (.55mm) 2.40 To convert 1/4" Th mm to inch divide by /8" POA mm to feet divide by mm mm sq to inch sq divide by /4" Th mm sq to feet sq divide by /2" Th Inch sq to feet sq divide by mm " Th Tube H30 Price per foot/300mm Price per inch/25mm 1/4" OD x 16swg /4" OD x 18swg OD x 3mm wall /16"x20swg /4" OD x 16swg " OD x 16swg /16" OD x16swg /4" OD x 14swg " OD X 10swg /8" OD x 16swg /4" OD x 10swg " OD X 1/4" wall /8" OD x 20swg /4" OD x 4mm wall " OD X 3/8" wall /16" OD x 16swg /4" x 1/4" wall " OD X 1/2" wall /2" OD x 16swg /8" OD x 10swg " OD X 1/4" wall /2" OD x 10swg /8" OD x 16swg "ODx16swg /8" OD x 10swg /2" OD x 16swg " OD X 1/8" wall /8" OD x 16swg OD x 1.5mm " OD X 3/16" wall /4" OD x 18swg /2" OD x 10swg " OD X 3/8" wall /4" OD x 16swg /2"ODx3/16"wall " OD X 1/2" wall /4"ODx14swg /2" OD x 1/4 wall /4" OD X 1/2" wall /4" OD x 10swg /8" OD x 16swg /2" OD x 10swg /8" OD x 10swg /8" OD x 10swg /2" OD x 1/4 wall /8" OD x 16swg /8" OD x 1/4 wall " OD x 10swg /8" OD x 18swg /4" OD x 16swg " OD X 1/4" wall " OD x 10swg /4" OD x 10swg " OD X 3/8" wall POA 1" OD x 16swg /4" OD x 1/4" wall " OD X 1/2" wall " OD x 3/ " OD x 10swg /2" OD X 3/8" wall /8" OD x 10swg " OD X 16swg wall /2" OD X 1/4" wall /8" OD x 16swg " OD X 1/4" wall "OD x 10swg " OD X 3/8" wall " OD X 1/4" wall " OD X 1/2" wall " OD X 1" wall /4" OD x 1/16" " OD X 10swg /4" OD X 1/8" wall " OD X 1/4" wall /4" OD X 1/4" wall " OD X 1/2" wall OD x 1.5mm wall " OD x 1/2" wall OD x 1.6 wall /2" OD X 1/4" wall 7.20 Page 5
6 Brass Diameters CZ121 Price per foot/300mm Price per inch/25mm 0.104" /8" /8" /16" mm /4" mm mm /8" POA 3/32" /16" " D /64" /4" /4 " mm mm /2" / mm /4" / / " / mm /4" mm /8" /2" /16" / /4" /32" mm " POA 5mm " /2" /4" /16" " POA 6mm /8" /2" mm /16" " POA 9/ mm /2 POA 5/16" /4" " POA 8mm / 3/8" / /2" 3.24 We are also stock: 3/8" mm 3.41 CZ114 Mang Bronze, 10mm /8" 3.84 CZ112 Naval Brass, and CZ mm /4" 4.87 Please enquire. 7/16" /8" mm mm /2" " mm /8" /16" /4" mm /8" mm /2" Squares CZ121 Price per foot/300mm Price Per Inch/25mm 3/32" (Coiled) /8" " /32" mm /8" /8" /16" /4" /32" mm sq /8" /16" /2" /2" mm /16" mm sq /32" 15mm /4" mm /8" " /4" mm /4" /32" sq /4" /2" /16" /8" /4" Hexagons CZ121 Price per foot/300mm 20mm " Price per inch/25mm 1/8" /8" /16" " /32" 4mm mm " " /16" /16" /4" /8" " /16" " POA.218"7/32" mm " /4" mm /2" /8" " POA 1/4" " " POA mm /16" /16 " /2" "9/32" mm mm " /16" " mm /8" Hexagon Naval Brass CZ112 Price Per Inch/25mm Hexagon Mang Bronze Price Per Inch/25mm 1.3" / " " " " " " " " / " 6.60 We are building stock of Naval Brass CZ121 and Mang Bronze CZ114 Hexagons. If your size requirement is not listed, please enquire. Page 6
7 Brass Flats CZ121 Price per foot/300mm Price per inch/25mm 1/32" x 1/2" /16" x 3/4" /16" x 1" /2" x 2 1/2" /16" x 1/4" /16" x 1" /16" x 1 1/2" /2" x 3" /16" x 5/16" /16" x 1 1/4" /16" x 2" /2"x5" /16" x 3/8" /16" x 1 1/2" /16" x 2 1/2" /2" x 6" /16" x 1/2" /16" x 2" /16" x 3" /8" x 1" /16" x 5/8" /16" x 21/2" /16" x 3 1/2" /8" x 1-1/2" /16" x 3/4" /16" x 3" /8" x 1/2" /8" x 2" mm x 25mm /16" x 4" /8" x 5/8" /8" x 3" /16" x 1" /4" x 3/8" /8" x 3/4" /8" x 4" /16" x 2" POA 1/4" x 1/2" /8" x 1" /4" x 1 " /32 x 1/4 POA 1/4" x 5/8" /8" x 1 1/4" /4" x 1 1/4" /32" x 3/4" /4" x 3/4" /8" x 1 1/2" /4" x 1 1/2" /8" x 1/4" /4" x 7/8" /8" x 2" /4" x 2" /8" x 3/8" /4" x 1" /8" x 2 1/2" /4" x 3" /8" x 1/2" /4" x 11/4" /8" x 3" /4" x 4" /8" x 5/8" POA 1/4" x 1 1/2" /8" x 4" " x 1 1/2" /8" x 3/4" /4" x 1 3/4" POA 3/8 x 6" " x 1 3/4" /8" x 7/8" /4" X 2" /2" x 5/8" " x 2" /8" x 1" /4" x 2-1/4" /2" x 3/4" " x 2-1/2" /8" x 1 1/4" /4"x2-1/2" /2" x 7/8" " x 3" /8" x 1 1/2" /4" X 3" /2" x 1" " x 3 1/2" /8" x 1 3/4" /4" x 4" /2" x 1 1/4" /4" x 2" /8" x 2" /4" X 5" /2" x 1 1/2" /4" x 3" /8" x 2 1/2" /4" X 6" /2" x 1 3/4" POA 1 1/2" x 2" /8" x 3" /16" x 3/8" /2" x 2" POA 1 1/2" x 2 1/2" /8" x 4" POA 5/16" x 1/2" /2" x 3" /16" x 1/4" POA 5/16" x 5/8" /16" x 3/8" /16" x 3/4" /16" x 1/2" /16" x 7/8" /16" x 5/8" 4.18 Angles Equal CZ121 Half Round CZ121 Price per foot/300mm Price per foot/300mm Angles Unequal CZ121 1/8" /4" x 1/4" x 1/16" 2.00 Price per foot/300mm 6mm x 3mm /16" x 5/16" x 1/16" /4" x 3/4" x 1/8" /4" /8" x 3/8" x 1/16" /2" x 3/4" x 1/8" /8" /2" x 1/2" x 1/16" mm /2" x 1/2" x 1/8" /2" /8" x 5/8" x 1/ /4" x 3/ /8" x 5/8" x 1/8" "X 3/ /4" x 3/4" x 1/16" " x 1/4" /4" x 3/4" x 1/8" 5.00 Tees CZ121 1" x 1" x 1/16" 5.40 Price per inch/25mm Channels CZ121 1" x 1" x 1/8" /8" x 3/8" x 1/16" 0.43 Price per inch/25mm 1" x 1" x 3/16" /2" x 1/2" x 1/16" /8" x 3/8" x 1/16" " x 1" x 1/4" /2" x 1/2" x 1/8" /2" x 1/2" x 1/16" /4" x 1 1/4" x 1/8" /4" x 3/4" x 1/8" /4 x 3/4 x 1/ /2" x 1 1/2" x 1/4" /4" x 3/4" x 1/16" " x 2" x 1/8" " x 2" x 3/16" We are currently expanding our range of Angles,Channels and 'T' sections, Please enquire. Page 7
8 Shim Price Per 1/2 sq Foot Brass To convert 0.001" Th 5.64 mm to inch divide by " Th 7.15 mm to feet divide by " Th 7.20 mm sq to inch sq divide by " Th 7.80 mm sq to feet sq divide by " Th 9.90 Inch sq to feet sq divide by " Th " Th " Th " Th " Th " Th Sheet CZ120 Price per sq foot/300mm Sheet CZ108 22swg(0.7mm) Price per sq foot/300mm 20 swg(.9mm) mm swg(1.2mm) swg mm swg swg swg swg mm swg(2.64mm) swg (.55mm) mm swg(0.7mm) swg swg(0.8mm) swg(.9mm) We can also supply Heavier Brass pl 19 swg CZ121, 120,112 Naval. Please enqu 18 swg (1.2mm) mm Wire 1.6mm fts/3mts 16swg swg swg swg swg (2.3mm) swg mm swg swg (2.64mm swg mm swg swg mm mm mm Conversion Table SWG INCH MM Boiler Band /8" x 22swg /32" x 22swg /16" x 22swg /4" x 22swg /16" x 22swg /8" x 22swg /2" x 22swg /8" x 22swg /4" x 22swg " x 22swg Page 8
9 Brass Brass Round Tube Brass Square Tube Price per foot/300mm Price Per Inch/25mm Price per foot/300mm 1/16" OD x 26swg " OD x 3/16" wall /4 x 1/4 22swg /32" OD x 24swg " OD x 1/4" wall /16 x 5/16 22swg /8" x 22swg /8" OD x 16swg /8 x 3/8 x18 swg /8" x 24swg /4" x 1/4 wall /16 x 7/ /32" OD x 22swg /4" x 10swg /2" x 1/2" x 16swg /32" OD x 24swg /4" x 20swg /4" x 3/4" x 16swg /32" OD x 28swg /4" x 16swg " x 1"x 16swg /16" OD x 16swg mmx 16mm ID /16" OD x 20swg /8" OD x 16swg 2.21 Price Per Inch/25mm 3/16" OD x 22swg /2" OD x 10swg /4" x 1 1/4" /16" OD x 28swg /2" x 16swg /2" x 1 1/2" /32" OD x 20swg /2" x 20swg " x 2" mm OD x 1mm /2" x 1/4 wall /4" OD x 16swg /8" OD x 10swg POA 1/4" OD x 24swg /8" OD x 16swg /4" OD x 22swg /4" OD x 16swg /4" OD x 20swg /4" OD x 10swg /4" OD x 18swg /4" x 1/4"wall /32" OD x 26swg /4" x 3/8"wall /16" OD x 16swg " OD x 1/ /16" OD x 18swg " OD x 3/ /16" OD x 22swg " OD x 10swg /16" OD x 24swg " OD x 16swg /16" OD x 20swg " OD x 18swg /8" OD x 26swg " OD x 20swg /8" OD x 20swg /4" OD x 16swg /8" OD x 22swg /2" OD x 16swg /8" OD x 18swg /2" OD x 10swg /8" OD x 16swg /2" OD x 3/16" wall /16" OD x 16swg " OD x 16swg /16" OD x 18swg /4"OD x 1/4" wall /16" OD x 20swg /4"ODx2-1/2"ID /2" OD x 18swg /2" OD x 16swg /2" OD x 20swg " OD x 16swg /2" OD x 16swg /2" x 13swg /2" OD x 26swg 3.80 If your size is not listed, please enquire. 9/16" OD x 20swg /16" OD x 16swg /8" OD x 16swg /8" OD x 18swg /8" OD x 20swg /8"x10swg /4"OD x 26swg /4" OD x 20swg /4" OD x 16swg /4" OD x 18swg /4" OD x 10swg /8" OD x 22swg /8"x 20swg /8" OD x 18swg /8" OD x 16swg " OD x 22swg " OD x 20swg " OD x 18swg " OD x 16swg " OD x 10swg Page 9
10 Cast Iron Rounds GR17 Price per inch/25mm Cast Iron Cast Iron Rounds SG (GGG40) Price per Inch/25mm 25mm D mm D mm D POA 30mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D POA 180mm D mm D mm D POA 240 mm D POA Cast Iron Squares GR17 Price per Inch/25mm Cast Iron Rectangles GR17 Price per Inch/25mm 1" Sq POA 25mm x 40mm mm sq mm x 60mm mm sq mm x 70mm mm Sq mm x 90mm mm Sq mm x 120mm mm Sq mm x 80mm mm Sq mm x 120mm mm sq mm x 130mm mm Sq mmx180mm mm sq mm Sq mm Sq 9.60 Please note. We can cut squares and rectangles to your requirements 100mm Sq a small cutting charge will apply. Please enquire. 110mm Sq mmSq mm sq mm sq mm sq mm sq mm sq mm sq Page 10
11 Copper Rounds C101 Price per foot/300mm Copper Price per inch/25mm 5/32" mm D " D mm D /8" D mm D /4" D /16" D mm D /4" D /4" D mm D " D /16" D mm D /4" D /8" D mm D /4" D /2" D mm D " D /16 D /8" D /4" D /8" D Copper Tube C106 Price per foot/300mm Price per inch/25mm 1/16" OD x 26swg /16" OD x 22swg /8" x 10swg /32" OD x 24swg /16" OD x 20swg /8" x 18swg /8" OD x 27swg /16" OD x 18swg /8" x 16swg /8" OD x 26swg /16" OD x 16swg /2" OD x 20swg /8" OD x 24swg /2" OD x 20swg /2" OD x 16swg /8" OD x 22swg /2" OD x 18swg /2" OD x 10swg /8" OD x 20swg /2"OD x 16swg /8" OD x 16swg /32" OD x 26swg /16" OD x 18swg mm ODx 9swg /32" OD x 24swg /16" OD x 16swg /4" OD x 20swg /32" OD x 22swg /8" OD x 20swg /4" OD x 16swg /16" OD x 26swg /8" OD x 18swg /4" OD x 10swg /16" OD x 24swg /8" OD x 16swg " OD x 20swg /16" OD x 20swg /4" OD x 10swg " OD x 18swg /16" OD x 22swg /4" OD x 14swg POA 2" OD x 16swg /16" x 18swg /4" OD x 16swg " OD x 10swg /16" OD x 16swg /4" OD x 18swg /4" OD 16swg /32" OD x 20swg POA 3/4" OD X 20swg /4" OD 10swg /32" OD x 24swg POA 7/8" OD x 20swg /2" x 20swg /4 OD x 22swg /8" OD x 18swg POA 2 1/2" x 16swg /4" OD X 20swg /8" OD x 16swg /2" x 10swg /4" OD x 18swg /8" OD x 17/32 ID /4" OD x 16swg /4" OD x 16swg " OD x 10swg " OD X 10swg /16" OD x 22swg mm OD x 16swg " OD X 14swg /16" OD x 18swg " OD x 16swg " OD X 16swg /16" OD x 16swg " OD x 18swg /4" x 16swg /16" OD x " OD x 20swg /4" x 10swg /8" OD x 22swg /8" OD x 10swg /2" x 16swg /8" OD x 20swg /8" OD x 16swg /2" x 10swg /8" OD x 18swg /8" OD x 20swg /4" x 13swg /8" OD x 16swg /4" OD x 10swg " x 10swg mm x1mm /4" OD x 16swg " x 16swg /4" OD x 20swg /4"OD x 10swg /2"OD x 10swg /2"OD x 13swg " OD x 13swg " OD x 10swg /4"OD x 10swg /2"OD x 10swg " OD x 10swg /4" OD x 10swg /2" OD x 10swg /4" OD x 10swg " OD x 8swg POA 8-1/4" OD x 10swg POA Page 11
12 Squares C101 Price per foot/300mm Copper Flats C101 Price per foot/300mm 3/16" Sq /8 x 1/ /16" x 5/16" mm Sq /8 x 3/ /16" x 3/4" /4" Sq /8 x 1 1/4" /8" x 1/2" /8" Sq /8 x 2" /8" x 3/4" /2" Sq /16" x 1/2" /8" x 2" /8" Sq /16 x 3/4" /2" x 1" /4" Sq /16 x 1" mm x 15mm mm x 12mm /2" x 2-1/2" /4" x 3/8" mm x 18mm /4" x 1/2" /4" x 1" /4"x3/4" 6.10 Sheet & Plate C106 Deoxidized C101HH Sheet. Price per sq foot/300mm SQ Price Per Sq foot/300mm sq 0.5mm mm mm swg mm Th mm swg (0.7mm) mm swg (0.8mm) mm Foil/Shim 20swg(0.9mm) mm Price Per 1/2 SQ foot/150 mm sq 19swg mm " swg " swg " swg/2mm swg(.0124) swg " swg /16" /4" /16" Nickel Silver Rounds Price per foot/300mm Flats Sheet 3/32 D 2.40 Price per foot/300mm Price per 1/2 Sq foot/150mm sq 2mmD /16" x 1/4" swg /8" D /4" x 1/8" swg /32 D /8" x 1/8" swg /16" D /16" x 3/16" swg mm mm /4" D swg /16" D swg /8" D swg /16" D mm mm /2" D /16" D Conversion Table 5/8" D SWG INCH MM 3/4" D mmD To convert 1" D mm to inch divide by 25.4 Price per inch/25mm mm to feet divide by /2"D mm sq to inch sq divide by mm sq to feet sq divide by Inch sq to feet sq divide by Page 12
13 Phos Bronze Rounds PB102 Price Per Foot/300mm Price Per Inch/25mm 1/8" D /8" /8" /32" /4" D /4" /16" D /8" D /2" /32" POA 1" /4" /4" D /8" " /16" D / /4" POA 3/8" D /4" D /2" POA 10mm /2" " POA 7/16" D / " POA 1/2" D /4" " POA 2" Also available is a limited range of metric sizes. POA. Hexagons PB102 Squares PB102 Price per Inch/25mm Price Per Inch/25mm 1/8" AF 1/2" AF " AF /4" /16" AF AF " AF /2" /4" AF /8" AF " AF /8" mm AF /8" / " AF /4" /16" AF /4" AF " AF " AF AF " AF /4" /8" AF /8" AF " AF /2" mm AF AF " AF /4" /16"AF " AF " Sheet PB102 Per 1/2 sq foot/150mmx300 Price Per SQ inch/25mmsq Price Per inch/25mm 24swg /4" TH /4" x 1" swg /16" TH /8" x 2" swg /8" TH /2" x 1-1/2" swg /2" TH /2" x 2" swg /16" mm Shim PB102 Hard Strip PB102 Wire Price Per 1/2 sq ft/150mmsq Price Per Foot/300mm Price Per 10 Foot /2" x 16swg mm (coil) /4" x 16swg swg /2" x 18swg swg /8 x 14swg swg /8 x 16swg swg swg swg 3.92 If your size is not shown squares,sheet,shim and hard strip, please enquire. Page 13
14 Rounds PB1 Price Per Inch/25mm Phos Bronze 1/2" D mm /8" D /4" mm D " /4" D /4" D /2" /8 D /4" " D mm mm " /8" D POA 4 1/2" /4" D /4" mm " /2" /2" POA 1 3/4" " POA 2" D /2" POA 2 1/4" " POA 2 1/2" " POA 41mm " POA Cont Cast PB1 Hollow Price Per Inch/25mm 1 x 1/2" POA 66mm x 49mm "x 3" POA 1 x 3/4" POA 2 3/4 x 1" POA 4-1/2" x 1-1/POA 1 1/4 x 1/2" POA 2-3/4"x 1 1/4" POA 4 1/2 x 2" POA 1-1/4x 3/4" /4 x 1 1/2" /2"x 2 1/2POA 1 1/2 x 1/2" /4"x 1 3/4" /2"x 3" POA 1 1/2" x 3/4" POA 2-3/4"x 2" POA 4 1/2 x 3 1/ /2"x 1" x 1" POA 5" x 2" POA 41mm x 19mm x 1 1/4" POA 132mm x 88m /4 x 1" " x 1 1/2" "x 2 1/2" POA 1 3/4 x 1 1/4" "x 2" "x 3" x 1/2" POA 3"x 2 1/4" POA 5"x 3 1/2" POA 2 x 3/4" POA 3"x 2 1/2" "x 4" POA 2 x 1" /4 x 1 1/2" POA 5 1/2 x 3" POA 2 x 1 1/4" /4"x 2" /2"x 3 1/2POA 2 x 1 1/2" POA 3 1/4" x 2 1/2" POA 5-1/2"x 4" POA 2 1/4 x 1" POA 3 1/2 x 1 1/2" x 2" POA 2 1/4"x 1 1/4" /2"x 2" POA 6"x 3" POA 2 1/4 x 1 1/2" /2"x 2 1/4" POA 6"x 3 1/2" POA 2-1/4"x 1 3/4" POA 3-1/2"x 2 1/2" POA 6"x 4" POA 2 1/2 x 1" POA 3 3/4 x 2" " x 4 1/2" POA 2-1/2"x 1 1/4" POA 3-3/4"x 2 1/2" POA 7" x 4" POA 2 1/2 x 1 1/2" x 1" POA 7"x 5" POA 2 1/2 x 1 3/4" POA 4"x 1 1/2" POA 8 x 5" POA 2-1/2x 2" POA 102mm x 48mm "x 6" POA 65mm x 30mm "x 2 1/2" POA We can cut squares, rectangles etc. from large diameters to customers requirements, please enquire. Page 14
15 Colphos 90 Colphos could be described as a Lead Bearing free machining PB102 also be sold by the Inch on request Rounds Hexagons Price Per inch/25mm Price Per Foot/300mm 1/8 D POA 9/16 D /32" AF 5/32" D /8 D /4" AF 3/16" D POA 3/4" D AF 1/4" D /8" D mm AF /16 D " D POA AF /8 D /8" D /16 AF /16 D mm AF /2" D AF /4" AF " AF " AF We are Currently expanding our range of Colphos If your size is not listed please enquire. Aluminium Bronze (CA104) Rounds 8mm D /2" D /8" D /8" D /4"D "D Page 15
16 Leaded Gunmetal Gunmetal Rounds LG2 Price Per Inch/25mm Gunmetal Blocks LG2 Per 1 inch/25mm sq 1/2" " /2" POA 11mm Thick /8" mm " POA 13mm Thick /4" /4" " POA 16mm Thick /8" /2" " POA 22mm Thick " mm " POA 26mm Thick /8" /4" " POA 1 1/4" " /8" /4" Blocks can be cut to 1 1/2" /2" customers requirments 1 5/8" /4" Please enquire. 1 3/4" " " /2" /4" " /2" /2" POA 2 3/4" " POA Gunmetal Hollows LG2 Price per inch/25mm 1" x 1/2" " x 1 1/2" " x 4" " x 3/4" " x 2" POA 5 1/2" x 3" POA 1 1/4" x 1/2" " x 2 1/4" POA 5 1/2" x 3 1/2" POA 1 1/4" x 3/4" " x 2 1/2" POA 5 1/2" x 4" POA 1 1/4" x 1" /4" x 1 1/2" x 2" POA 1 1/2" x 1/2" /4" x 2" " x 3" POA 1 1/2" x 3/4" /4" x 2 1/4" POA 6" x 3 1/2" POA 1 1/2" x 1" /4"x 2 1/2" " x 4" POA 1 3/4" x 1" /4"x 2 3/4" POA 6" x 4 1/2" POA 1 3/4" x 1 1/4" /2" x 1" " x 5" /4" x 1 1/2" /2" x 1 1/2" /2" x 4" POA 2" x 1/2" /2" x 2" /2"x 5" POA 2" x 3/4" /2" x 2 1/4" POA 7" x 3" POA 2" x 1" /2"x 2 1/2" " x 4" POA 2" x 1 1/4" /4" x 2" POA 7" x 5" POA 2" x 1 1/2" mm x 65mm " x 6" POA 2" x 1 3/4" /4" x 2 1/2" mm x 98mm /4" x 1" /4" x 3" POA 8" x 4" POA 2 1/4" x 1 1/4" " x 1" " x 5" POA 2 1/4" x 1 1/2" " x 1 1/2" POA 8" x 6" POA 2 1/4" x 1 3/4" " x 2" " x 4" POA 2 1/2" x 1" POA 4"x 2 1/2" POA 9" x 5" POA 2 1/2" x 1 1/4" " x 3" " x 6" POA 2 1/2" x 1 1/2" " x 3 1/4" POA 9" x 7" POA 2 1/2" x 1 3/4" POA 4 1/4" x 2 1/4" " x 5" POA 2 1/2" x 2" POA 4 1/2" x 2" " x 6" POA 2 3/4" x 1" /2" x 1 1/2" " x 7" POA 2 3/4" x 1 1/4" POA 4 1/2" x 2 1/2" POA 10" x 8" POA 2 3/4" x 1 1/2" POA 4 1/2" x 3" x 8" POA 2 3/4" x 1 3/4" POA 4 1/2" x 3 1/2" POA 12" x 6" POA 2 3/4" x 2" POA 5" x 2" " x 8" POA 2 3/4" x 2 1/4" " x 2 1/2" " x 9" POA 3" x 1" POA 5" x 3" " x 1 1/4" POA 5" x 3 1/2" POA Page 16
17 Nylon 66/6. Plastics. Price Per inch/25mm 6mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D (6) mm D mm D mm D mm D mm D mm D (6) mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D 7.39 Delrin 130mm D POA 8 mm D mm D 1.44 Nylon 66 available in natural or black colour. 15 mm D mm D mm D Plastics can be supplied by the inch. 40 mm D mm D mm D Nylatron diameters also available. 60mm D Tufnol Price Per Inch/25mm 6mm D mm D 0.60 Tufnol Strip Tufnol Cut from Sheet 10mm D 0.66 Price unit as marked 12mm D /8" x 1/32" mm Thick Sq Foot mm D /2" x 1/32" mm Thick x 80mm Sq Inch mm D /16" x 1/32" mm Thick x 80mm Sq Inch mm D /16" x 1/32" mm Thick Sq Foot mm D /4" x 1/32" mm Thick Sq Foot mm D mm Thick Sq Foot mm D mm Thick Sq Foot mm D mm Thick Sq Inch 0.38 PTFE Diameters Price Per Inch/25mm 6mm D mm D mm D mm D mmD mm D mmD mm D mmD mm D mm D mm D mm D mm D mm Thick Sq Inch mm Thick Sq Inch 0.67 Acetal Diameters Fluorosint Price Per inch/25mm Price Per inch/25mm 6mm D mm D /2" D mm D mm D " D mm D mm D mm D N mm D mm D B mm D mm D 1.99 We stock Nylon, Perspex, Polycarbonate and Acetal sheet. Page 17
18 Stainless Steel. Imperial Diameters 303 Metric Diameters 303 Diameters 304 1/16" mm mm /32" mm mm /8" mm mm /32" mm /32" /16" mm mm /32" mm /16" /4" mm mm D /32" mm mm D /16" mm /4" D /8" mm mm D /16" mm mm D /2" mm /8" D /16" mm /16" /8" mm mm /16" mm /2" D /4" mm mm mm 5/8" D 4.06 Price Per inch/25mm 16mm /8" 0.86 Price Per inch/25mm 17 mm D " mm /8" D /8" mm /4" mm 0.84 Price Per inch/25mm 1-1/2" mm /4" D /8" mm POA 1" D /4" mm mm /8" mm mm " mm mm /4" mm /2" " /4" We also stock a range of 410,420,431 (EN57) 3-1/2" Please enquire. 4" /4" " Diameters 416 (EN56) Magnetic Diameters 316 Price Per inch/25mm Price Per Inch/25mm 1/4" " /16" POA 3/4" /16" /8" /8" mm /8" /4" mm mm /8" /2" /32" mm /4" " mm /8" /8" mm " /4" /8" POA 3/16" mm 2.28 Grades Of Stainless Steels. 8mm mm POA 5/16" /4" 2.28 C Cr Ni Mn Other 3/8" /8" 3.24 None Magnetic (Austenitic) 10mm /2" /16" /8" POA mm mm /2" mm POA Mo 9/16" " mm /8" 7.80 Ferritic 2-1/2" POA /8" POA /4" POA Magnetic (Martensitic) 3" /2" POA /2" POA Page 18
19 m-machine Stainless Steel. Hexagons 303 Hexagons 316 Squares " AF POA 8mm AF /16" mm AF mm AF /4" POA 0.193" AF POA 7/16" AF /16" POA 5mm AF mm AF /8" POA 5.5mm AF mm AF /16" POA 0.218" (7/32) POA 0.601" AF /2" POA 6mm AF " (7mm) 2.93 Squares 304 5/16" AF 3.07 Price Per inch/25mm.324" AF " AF /8" POA 3/8" AF mm AF mm /4" AF " AF mm mm " AF mm /16" AF mm AF /2" " AF mm AF POA 5/8" " AF " AF /4" mm AF " AF /2" AF " AF 2.16 Price Per inch/25mm 13mm AF " AF POA 16mm " AF mm /16" AF /8" " AF mm " AF " /8" AF mm /16" AF /4" 3.36 Price Per inch/25mm 50mm /4" AF 1.10 Squares " AF 1.10 Price Per inch/25mm 7/8" AF /2" Sq " AF /8" Sq " AF /4" Sq " AF mm Sq " AF " Sq " AF /4" sq /4" Sq 6.52 We are currently expanding our stock of Whitworth and BA Stainless Hexagons in 303 & 316. If your size is not listed please enquire. We also have limited stocks of 316 Squares. Stainless Angles We have a limited range of equal angles in stock in 304 and 316 grades, Please enquire. Page 19
20 Stainless Steel. Stainless Flats 304 Stainless Flats 316 Stainless Sheet 304 Per sq foot/300mm sq 3mm x 12mm mm x 12mm g/.5mm mm x 15mm mm x 20mm g/.7mm mm x 20mm mm x 25mm g mm x 25mm mm x 30mm g/1mm mm x 40mm mm x 12mm g/1.2mm mm x 30mm mm x 25mm mm mm x 50mm mm x 30mm g/1.6mm POA 3mm x 75mm mm x 50mm g/2.0mm mm x 12mm mm x 20mm g/3.0mm mm x 20mm mm mm x 25mm 3.02 Price Per inch/25mm 6mm POA 5mm x 30mm mm x 40mm /4" POA 5mm x 40mm mm x 25mm mm x 50mm mm x 100mm 6.19 Stainless Sheet 316 5mm x 75mm mm x 75mm 6.60 Per sq foot/300mm sq 6mm x 12mm mm mm x 15mm mm mm x 20mm mm mm x 25mm mm Price Per inch/25mm 6mm x 30mm mm x 40mm mm x 40mm mm x 50mm mm x 50mm mm x 20mm mm x 75mm mm x 25mm mm x 100mm mm x 40mm mm x 20mm mm x75mm mm x 25mm mm x100mm 2.04 Imperial Flats are no longer available 8mm x 30mm mm x100mm 3.17 or are difficult to obtain. 8mm x 40mm mm x 40mm mm x 50mm mm x 50mm mm x 80mm mm x 75mm mm x 20mm mm x 50mm mm x 25mm mm x 75mm mm Page 20
21 Stainless Steel. Stainless Tube. 316 Stainless Tube 304 Price Per Foot/300mm 1/16" OD x 33swg /16" OD x 22swg /16" OD x 30swg mm OD x 1.5mm wall /16" OD x 27swg /4" OD x 20swg POA 1/16" OD x 24swg /16" OD x 18swg POA 3/32" OD x 30swg /16" OD x 20swg POA 3/32" OD x 27swg /8" OD x 16swg POA 1/8" OD x 30swg /16" OD x 20swg POA 1/8" OD x 26swg /2" OD x18swg /8" OD x 24swg /2" OD x20swg /8" OD x 22swg /8" OD x16swg POA 1/8" OD x 20swg /8" OD x18swg /32" OD x 33swg /4" OD x18swg /32" OD x 27swg /4" OD x16swg /32" OD x 24swg mm ODx1.5mm /16" OD x 27swg mm ODx3mm /16" OD x 24swg /4" NB SCH /16" OD x 22swg /2" NB SCH /16" OD x 20swg POA 6mm x 1.0mm 5.77 Price Per inch/25mm 1/4" OD x 22swg " OD x 20swg POA 1/4" OD x 20swg x 2mm wall /4" OD x 16swg OD x /16" OD x 22swg /4" OD x 20swg /16"OD x 20swg /4" OD x 16swg /16"OD x 18swg /2" OD x 1.5mm mm x 1.0mm /2" OD x 10swg POA 3/8" OD x 22swg /2" OD x 3mm wall /8" OD x 20swg /4" OD x 10swg POA 3/8" OD x 18swg mm x 1.5 wall /8" OD x 16swg " OD x 1 1/2" bore /16"OD x 20swg " OD x 3mm wall /16" OD x 16swg /8" x 16swg mm x 1.5wall /2" OD x16swg /2" OD x 22swg mm x 2mm wall /2" OD x 20swg /8"ODx 5.5mmwall /2" OD x 18swg " x 16swg /2" OD x 16swg " OD x 16swg mm OD x " OD x 3mm wall mm OD x /8" OD x 18swg /8" OD x 16swg /8" OD x 10swg /4" OD x 16swg /4" OD x 18swg mm x 2mm wall 8.64 Page 21
22 Steel Rounds. Bright Steel Imperial EN1A (230M07) Bright Steel Metric EN1A (23M07) Price Per Inch/25mm Price Per inch/25mm 1/16" POA 1 3/8" mm mm /32" /8"Pb mm mm /8" /2" mm Pb mm /32" /2" Pb mm mm /16" /8" mm mm /32" /4" mm Pb mm /4" /4" Pb mm mm /4" Pb /8" mm mm /32" " mm mm /16" /8" mm Pb mm /8" /4" mm mm /8" Pb /4" Pb mm mm /16" /8" mm mm /2" /2" Pb mm mm /16" /2" mm mm /16" Pb /8" mm mm /8" /4" mm mm /8" Pb /8" mm mm /16" " mm mm /4" /4" mm mm /16" /2" mm mm /8" /4" /8" Pb " /16" /4" " /2" 9.00 EN1A is a free machining steel for general purpose. 1"Pb /4" /16" " (*Pb denotes high lead content) 1-1/8" /2" /16" " /4" /2" POA 1 1/4" Pb " /16" 7.80 Bright Steel Imperial EN3 (080A15) Bright Steel Metric EN3 (080A15) Price Per inch/25mm Price Per inch/25mm 1/8" /8" mm mm /16" /2" mm mm /4" /8" mm mm /16" /4" mm mm /8" " mm mm /16" /4" mm mm /2" /8" mm mm /16" /2" mm mm /8" /4" mm mm /4" " mm mm /8" /4" mm mm " " mm mm /8" /2" mm mm /4" /2" mm 3.90 Black EN3 (070M20) Price Per inch/25mm 6mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D mm D POA 22mm D mm D mm D mm D POA 25mm D 2.40 Page 22
23 Steel Rounds. Bright Steel Imperial EN8 (080M40) Bright Steel Metric EN8 (080M40) Price Per inch/25mm Price Per inch/25mm 1/4" /8" mm mm /16" /2" mm mm /8" /2" PB mm mm /8" PB /8" mm mm /16" /4" mm mm /2" " mm mm /2" PB /8" mm mm /16" /4" mm mm /8" /4" PB /8" PB /8" /16" /2" /4" /8" /4" /4" /8" " " /2" 3.60 Bright Steel Metric EN24T (817M40) 1" PB " 5.16 Price Per inch/25mm 1 1/8" /4" mm mm /4" " mm mm mm mm 3.79 Bright Steel Imperial EN24T (817M40) 20mm mm POA Price Per inch/25mm 25mm mm POA 1/4" /8" mm mm POA 5/16" /4 " /8" /8" /2" /2" /8" /8" /4" /4" /8" " " " 4.20 EN40B (Nitriding Steel) Bright Steel Rounds EN16T (605M36) Price Per Foot/300mm Price Per inch/25mm Price Per inch/25mm 25mm D mm D /4" /4" mm D mm /8" mm mm /2" /2" /16" /4" /8" " 2.16 We have limited stock of EN8DM (212A42) Free machining. 3/4" mm 2.45 EN8 Black diameters and EN19A (708M40) 20mm mm 2.52 Please enquire. 7/8" mm mm " " mm POA 30mm mm 4.10 Page 23
24 Steel Rounds Continued. EN 19 1/4" D /4" D 9.06 Precision Ground EN1A Rounds 1/4" D mm D /16" D mm D /8" D mm D /16" D mm D /2" D mm D /8" D mm D /16" D mm D /4" D mm D /8" D mm D " D mm D /8" D /4" D /2" D Also Limited stock of EN31 & EN36 Page 24
25 Steel Flats. Imperial Bright Flats EN32B (080A15) Price Per Foot/300mm 1/16" x 1/4" /16" x 1" /16" x 3/4" /2" x 3/4" /16" x 3/8" /16" x 11/4" /16" x 7/8" /2" x 7/8" /16" x 1/2" /16" x 1 1/2" /16" x 1" /2" x 1" /16" x 5/8" /16" x 1 3/4" /16" x 1 1/4" /2" x 1 1/4" /16" x 3/4" /16" x 2" /16" x 1 1/2" /2" x 1 1/2" /16" x 1" /16" x 2 1/4" /16" x 2" /2" x 1 3/4" /16" x 1 1/4" /16" x 2 1/2" /16" x 2 1/2" /2" x 2" /16" X 1 1/2" /16" x 3" /16" x 3" /2" x 2 1/4" /16" x 2" /16" x 4" /16" x 4" /2" x 2 1/2" /16" x 21/2" /16" x 6" /16" x 5" /2" x 3" /16" x 3" /4" x 3/8" /16" x 6" /2" x 31/2" /16" x 4" /4" x 1/2" /8" x 1/2" /2" x 4" /8" x 1/4" /4" x 5/8" /8" x 5/8" /2" x 5" /8" x 3/8" /4" x 3/4" /8" x 3/4" /2" x 6" /8" x 1/2" /4" x 7/8" /8" x 7/8" /8" x 3/4" /8" x 5/8" /4" x 1" /8" x 1" /8" x 1" /8" x 3/4" /4" x 1 1/4" /8" x 1 1/4" /8" x 1 1/4" /8" x 7/8" /4" x 1 1/2" /8" x 1 1/2" /8" x 1 1/2" /8" x 1" /4" x 1 3/4" /8" x 1 3/4" /8" x 1 3/4" /8" x 1 1/4" /4" X 2" /8" x 2" /8" x 2" /8" x 1 1/2" /4" x 2 1/4" /8" x 2 1/4" /8" x 21/2" /8" x 1 3/4" /4" x 2 1/2" /8" x 2 1/2" /8" x 3" /8" x 2" /4" x 3" /8" x 3" /8" x 4" /8" x 2 1/2" /4" x 31/2" /8" x 31/2" /8" x 5" /8" x 3" /4" x 4" /8" x 4" /8" x 10" /8" x 4" /4" x 5" /8" x 41/2" /4"x7/8" /8" x 6" /4" x 6" /8" x 5" /4" x 1" /16" x 3/8" /4" x 7" /8" x 6" /4" x 1 1/4" /16" x 1/2" /4" x 8" /8" x 7" /4" x 1 1/2" /16" x 5/8" /4" x 12" /8" x 8" /16" x 3/4" /16" x 1/2" /8" x 10" /16" x 7/8" /16" x 5/8" /2" x 5/8" 2.90 Price Per inch/25mm 3/4" x 1 3/4" " x 1 1/2" /4" x 1-1/2" /4" x 2 " /4" x 2" " x 1 3/4" /4" x 1 3/4" /4" x 2 1/2" /4" x 21/4" " x 2 " /4" x 2" " x 2 1/2" /4" x 21/2" " x 2-1/4 " /4" x 2-1/4" " x 3" /4" x 3" " x 2 1/2" /4" x 2-1/2" " x 3 1/2" /4"x3-1/2" " x 3" /4" x 3" " x 5" /4" x 4" " x 4" /4" x 4" /2" x 3" /4" x 5" " x 5" /4" x 12" /2" x 4" /4" x 6" " x 7" /2" x 2" " x 5" /8" x 1" " x 8" /2" x 2 1/2" " x 1 1/4" " x 12" /2" x 3" 2.15 EN8 Imperial Bright Flats. 3/8 "X 1 1/2" /8 " X 2" NOTE: 1/16" thickness are cut from sheet. Page 25
26 Metric Bright Flats EN32B (080A15) Price Per Foot/300mm Steel Flats. 3mm x 10mm mm x 50mm mm x 40mm mm x 200mm mm x 12mm mm x 60mm mm x 50mm mm x 30mm POA 3mm x 16mm mm x 65mm mm x 60mm mm x 70mm POA 3mm x 20mm mm x 70mm mm x 65mm mm x 20mm mm x 25mm mm x 75mm mm x 70mm mm x 25mm mm x 32mm mm x 80mm mm x 80mm mm x 30mm mm x 40mm mm x 90mm mm x 90mm mm x 32mm mm x 50mm mm x 100mm mm x 100mm mm x 35mm mm x 60mm mm x 125mm mm x 110mm mm x 40mm mm x 80mm mm x 12mm mm x 125mm mm x 45mm mm x 10mm mm x 15mm mm x 150mm mm x 50mm mm x 12mm mm x 20mm mm x 16mm mm x 60mm mm x 16mm mm x 25mm mm x 20mm mm x 65mm mm x 20mm mm x 30mm mm x 25mm mm x 70mm mm x 25mm mm x 40mm mm x 30mm mm x 75mm mm x 30mm mm x 45mm mm x 32mm mm x 80mm mm x 40mm mm x 50mm mm x 35mm mm x100mm mm x 50mm mm x 60mm mm x 40mm mm x 25mm mm x 60mm mm x 70mm mm x 50mm mm x 30mm mm x 100mm mm x 75mm mm x 60mm mm x 32mm mm x 10mm mm x 100mm mm x 70mm mm x 35mm mm x 12mm mm x 150mm mm x 75mm mm x 40mm mm x 16mm mm x 12mm mm x 80mm mm x 45mm mm x 20mm mm x 16mm mm x 90mm mm x 50mm mm x 25mm mm x 20mm mm x 100mm mm x 60mm mm x 30mm mm x 25mm mm x 125mm mm x 65mm mm x 35mm mm x 30mm mm x 150mm mm x 40mm mm x 35mm mm x 160mm Price Per inch/25mm 20mm x 70mm mm x 80mm mm x 80mm mm x 100mm mm x 90mm mm x 40mm mm x100mm mm x 45mm mm x120mm mm x 50mm mm x125mm mm x 60mm mm x150mm mm x 70mm mm x200mm mm x 80mm mm x 300mm mm x 90mm mm x 30mm mm x 100mm mm x 32mm mm x 150mm mm x 35mm mm x 45mm mm x 40mm mm x 50mm mm x 45mm mm x 60mm mm x 50mm mm x 65mm mm x 60mm mm x 70mm mm x 65mm mm x 90mm 3.11 Page 26
A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
More informationContents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationSTOCK LIST & BUYER S GUIDE
STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500
More informationAriva Powerful Marketing Displays. Exhibit & Display Solutions
Ariva Powerful Marketing Displays Exhibit & Display Solutions Banner Displays BRONZE BRONZE XL (see page 3) (see page 3) Retractable banner stand Twist-out feet Black or silver finish Silver retractable
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationPRODUCTS. Stainless Steel (Ferritic & Austenitic) Aluminised Steel Mild Steel Titanium
S u p p l i e r s o f H i g h Q u a l i t y P e r f o r a t e d S t a i n l e s s S t e e l Tu b i n g THE COMPANY The Joint Perforating Company, established in 2001 has re-invented the perforating process.
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationSeamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationmotion solutions for leisure, mobility and industrial applications www.parvalux.com
motion solutions for leisure, mobility and industrial applications www.parvalux.com designed for application bespoke DC gear-motor solutions 2 STAIR LIFT unique worm-spur double reduction gearbox delivering
More informationRÉAMHRÁ. Tá méadú taghtha ins na hearrraí tionscaliocht áta á trácht aguinn.
RÉAMHRÁ Is é seo an tríu eagrán dár clár agus tá athru mór déanta in ár stuc o cuirimear an céad eagrán amach. Tá an eagran seo níos simplí agus tá lán do no hearaí a tracht aguinn ann. Tá méadú taghtha
More informationHow To Write A Recipe Card
Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure
More informationPerfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
More informationThe Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationIs your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
More informationCable & Rod Displays DELIVERY NEXT DAY
4 Cable & Rod Displays LED Cable Kits 48 Cable Poster Kits 49-50 Freestanding Cable Poster Kits 51 Cable Fixings 5-5 Rod Fixings 54-55 Cable/Rod Acrylic Accessories 56 Cable/Rod Poster Pocket Accessories
More information3D Printing for Industry Today: Fact or Fiction?
3D Printing for Industry Today: Fact or Fiction? March 2015 Presentation for Additive World Conference, Eindhoven, NL Part 1: Challenge Part 2: Approach Part 3: Examples Part 4: Conclusions Main question
More informationStainless Steel Section...
Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationCost. 13p each. 1.50 each
G-QRP Club components This is a service for G-QRP Club members only 6 pole crystal filter SSB 9MHz 2.2kHz 500 Ohm in/out 12 Polyvaricon capacitors 2 gang - 8 to 140pF & 6 to 60pF (tags marked A & O respectively)
More informationNorth American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
More informationPART-II (COMMERCIAL / PRICE BID) DESIGN, SUPPLY AND INSTALLATION OF CUSTOMIZED STEEL LAB FURNITURE.AT N.C.C.S., PUNE
(An Autonomous Institution of the Department of Biotechnology, Govt. of India) N.C.C.S. Complex, Ganeshkhind, Pune University Campus, Pune 411007. PART-II (COMMERCIAL / PRICE BID) DESIGN, AND INSTALLATION
More information172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following
More informationAdvice Our expert staff will help you with any query you may have - do not hesitate to ask us, by calling our freephone number 0800 262015.
Scotland s distributing partner for leading plastic manufacturers Sheena and Colin Stockline Plastics have been in this business for over forty years. We are true Plastics Fanatics. We believe when you
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationMagnum Magnetizers. Print Magnum's magnet media on your digital press and magnetize post press with Magnum Magnetics magnetizer.
Magnum Magnetizers Print Magnum's magnet media on your digital press and magnetize post press with Magnum Magnetics magnetizer. In-Line Magnetizers In-line Magnetization Magnum Magnetics, The Force in
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationContents and Nomenclature
DX Coils Contents and Nomenclature Nomenclature... 1 Evaporator Coil Types EN... 2 EF... 2 ER... 2 EJ... 3 EK... 3 Evaporator Construction Connections... 4 Tubing... 4 Headers... 5 Tube Supports... 5 Coil
More informationModeling Curved Surfaces
Modeling Cylindrical and Curved Theory Views of Cylinders Contour Lines Extruded Surfaces Revolved Surfaces & Cutouts Profile Shape Axis of Revolution Swept Surfaces & Cutouts Profile Shape Path Curves
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationForce Measurement Systems. Force Measurement Systems
Force Measurement Systems Force Measurement Systems Force Measurement Systems from IMS Your Guarantee of Quality Modern production equipment is designed for high productivity and quality. To achieve these
More informationenvelopes and printers cards from stock, for next-day delivery
envelopes and printers cards from stock, for next-day delivery PRICE LIST JULY 2013 21 2 CARDS AND ENVELOPES Say it with gold borders or silver, bevel-edged or deckle Baddeley Brothers has a card for every
More informationProTurn Power Turn Belts, Merge Table Belts
ProTurn Power Turn Belts, Merge Table Belts WHAT CAN WE OFFER? POWER TURN REPLACEMENT BELTS FROM BELTSERVICE In the case of conveyors, sometimes the most direct route isn t a straight line. In these situations,
More informationVOLUME AND SURFACE AREAS OF SOLIDS
VOLUME AND SURFACE AREAS OF SOLIDS Q.1. Find the total surface area and volume of a rectangular solid (cuboid) measuring 1 m by 50 cm by 0.5 m. 50 1 Ans. Length of cuboid l = 1 m, Breadth of cuboid, b
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationTubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationVEHICLE FERRY PARCEL SERVICE
The Isle of Wight Delivery Specialists VEHICLE FERRY PARCEL SERVICE In Partnership with SOUTHAMPTON EAST COWES We are pleased to announce that from 4th April 2016 the Vehicle Ferry Parcel Service will
More informationSwitches SWITCHES SWITCHES
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationChapter 5 FLOOR LOADING AND WEIGHTS
Chapter 5 FLOOR LOADING AND WEIGHTS Section 1.0 Floor Loading Section 2.0 Seismic Data The CT system has a total floor load of approximately 6660 lbs (3021 kg). About 5050 lbs (2291 kg), including patient
More informationTECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic
- TECHNISCHE FICHE - Chat Board: Classic Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHATBOARD Classic is Danish Design - made in Denmark. Classic is a glass
More informationShelf Support Systems
Shelf Support Systems Cabinet Hardare - Shelving and Bookcase Strip Cabinet Hardare Shelf Support Systems Four different styles of bookcase strip and five shelf support stud designs combine to create an
More informationPowerSpout Technical Specifications. PowerSpout PLT, TRG and LH
PowerSpout PLT, TRG and LH Valid from January 2014 PowerSpout Contact details Web: www.powerspout.com PowerSpout is a product proudly designed and manufactured by: EcoInnovation Ltd 671 Kent Road New Plymouth
More informationMSS Monobloc holders for parting and grooving
MSS Monobloc holders for parting and grooving Easy, profitable and convincing 2 Monobloc tool holder, system GX, for inserts with two cutting edges, size GX24. Inexpensive solution for radial grooving,
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationUrban lighting luminaire XMOD RX. Registered models - Design Massimo Sacconi. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato)
Urban lighting luminaire XMOD RX Registered models - Design Massimo Sacconi NERO e GRIGIO per marchi piccoli M OD RX XMOD is part of the XMOD series : a series of LED luminaires for street, urban and architectural
More informationRoyal Mail online prices
Royal Mail online prices Your handy guide to our online UK and international parcel service prices Online prices are available for postage purchased through Royal Mail Click & Drop, Royal Mail Online Postage
More informationDuplex stainless steels
Duple stainless steels 2202 2507 2304 2205 by ArcelorMittal ArcelorMittal, your key partner ArcelorMittal is the world leader in the steel industry. Through many of its units, it offers a multitude of
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationEuropean Welding Standards
European Welding Standards John Dyson 15 th March 2004 European Standards Harmonised Standards Not all EN Standards are Harmonised, only those that are considered to satisfy relevant ESRs in product directives.
More informationBERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More information406 416 407 417 408 418 409 419 410 420 411 421 412 422 413 423 100 LED
Omega 406 Marcos 416 Micron 407 Girona 417 Gemini 408 Mini Carpio 418 Recta Max 409 Carpio 419 Dorada LED 410 Busto Wall 420 Londrina 411 Orense 421 Madrid 412 Cabello 422 Oro LED 413 Mini Cabello 423
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationTHE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationHow To Run A Test Lab In Rourkela
TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More informationUltra Laptop Support Desk Mount Series
Ultra Laptop Support Desk Mount Series Ultra Laptop Support Desk Mount Series 0 The Ultra series of mounting solutions for Laptops is a durable, high quality, articulating laptop support arm. +/- 180 Landscape
More informationGear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
More informationLOW GAIN BASE STATION ANTENNA AV1312-1A
SPECIALS : AV1312-1A LOW GAIN BASE STATION ANTENNA AV1312-1A AV1312-1A 118 144 MHz 26 MHz 50 Ω DC grounded 1,5 max/depending on mounting 2 dbi E-plane 3 db beamwidth 70 H-plane 3 db beamwidth 200 /depending
More informationEquivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409
Engineering Data Table of Contents Page No. I II Formulas, Conversions & Guidelines Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Sizing 408-409 Steam
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationBuyers Guide: Information required:
Buyers Guide: Information required: When ordering, please state: 1 Reference Number of Mesh (include any alphabetical suffix) Conventional/Flattened Mesh Dimensions: 1. For conventional (raised) meshes
More informationDPS Digital Printing Supplies P/L 9 Enterprise Way, Sunshine West, VIC 3020 T: 1300 730 086 W: www.dpsaustralia.com.au E: sales@dpsaustralia.com.
Category: BUDGET PU UP BANNER R-10 DP Digital Printing upplies P/ 9 Enterprise Way, unshine West, VIC 3020 T: 1300 730 086 W: www.dpsaustralia.com.au E: sales@dpsaustralia.com.au IAGE IT (Exclude GT &
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationMERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
More informationEEC 94/20/EC APPROVED KINGPINS
EEC 94/20/EC APPROVED KINGPINS All Capus EEC approved Kingpin Assemblies have been tested in Germany by RWTuV. The tests include a simulated life test - 2 million cycles at the approved 'D' value loadings.
More informationCopper-Nickel Mill Products
Copper-Nickel Mill Products Copper-Nickel Rod, Sheet, Plate, and Tubing ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 9, one of its
More information1 1.5" (38 mm) Diameter
CAB Cable Rings and Saddles are offered in all sizes and materials. Please call or email if your preferred item is not listed on these charts. TABLE OF CONTENTS Part Numbers for 1.5 inch (38mm) diameter
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationCold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationB.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
More informationLecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More information