Duplex stainless steels
|
|
- Emory Webb
- 7 years ago
- Views:
Transcription
1 Duple stainless steels by ArcelorMittal
2 ArcelorMittal, your key partner ArcelorMittal is the world leader in the steel industry. Through many of its units, it offers a multitude of effective, innovative and environmentally friendly stainless steel solutions, tailored to meet its customers epectations. Plates by Industeel, flat products by Stainless Europe and Ino Brazil, welded tubes by Tube Europe, thin strips by Precision Europe, wire rods by Stainless & Nickel Alloys, an alternative source in Duple range is born. With our mills epertise of over 20 years and efficient R&D resources, we have achieved your desire in less than 2 years. Innovation, technical partnership, service transformingtomorrow
3 Our Duple offer, a comprehensive alternative to standard austenitics Available grades and shapes UNS EN C Cr Ni Mo N Others PREN* Plates Coils Strips Tubes DX2202* UR2202 S DX2304 UR2304 S DX1803 UR2205 S /34 DX2205 UR2205 Mo S /36 UR2507 S UR2507 Cu S <Cu<2 40 UR2507 W S Cu 0.8-W *DX2202/UR2202 is patented by ArcelorMittal Industeel and Ugitech (long products),. Duple solutions can replace standard austenitics for most service environments. Typical Yield Strength (MPa) Duple DX2304 DX L 316L DX2507 Cu 2507 W DX L Super Austenitic 6% Mo Austenitic Corrosion Resistance Thanks to their dual phase (ferrite + austenite) structure, their mechanical properties are twice as high as those of austenitics. 3
4 Dimensional program in plates Hot rolled ASTM/EN 1D Industeel 2507/2507Cu/2507W < Industeel < Industeel < Industeel <120 4
5 Dimensional program in coils Stainless Europe is the group s worldwide producer of coils with a large and attractive range of grades and dimensions Hot rolled ASTM N 1 / EN 1D DX2205 Cold rolled : 2B or 2E DX ,5 4 4, <12 0,5 0,7 0,8 0,9 1 1,2 1, DX2304 DX ,5 4 4, DX ,5 4 4, ,5 0,7 0,8 0,9 1 1,2 1, DX2202 0,5 0,7 0,8 0,9 1 1,2 1, Consult us 2B or BA finishing 2E or 2B finishing 2B finishing Coil weight (Kg.mm) CR HRAP 15,5 16,5 15,5 16,5 15,5 16,5 12,5 13,5 Sheets from coils (CMP) are also available with length up to 0mm Special finishes (2G, 2J) are possible on request Ino Brasil developed an offer in coils, sheets and plates for its local market. Grade 2205 Product CR Coil and sheet HRAP Coil HRAP Sheet CMP CMP Thickness (mm) 1.2 to to to to to 50.8 Width (mm) 1540 Finish 2D/2B N 1 (1D) N 1 (1D) Sheets from coils (CMP) are also available with length up to 6100mm 2304 CR Coil and sheet HRAP Coil HRAP Sheet CMP CMP 1.2 to to to to to D/2B N 1 (1D) N 1 (1D) 5
6 Dimensional program in wire rods Diameter from 5.5 (0.204 ) to 12.5 mm (0.479 ) Grades and Applications TRADE NAMES CHEMICAL ANALYSIS STANDARD C Si Mn Ni Cr Mo Cu S P Others AWS Phyweld AWS SFA 5.9 ER 312 UNS S31380 Used for welding duple steel with high mechanical properties. Offers a very large application field as welding material of tools steels, springs steels, high temperature resistant steels or other duple steels. Weld metal: very good wear and wet corrosion resistance such as in the sulfuric environment of the paper industry. Phyweld 45N N 0.10 / 0.20 Used for welding over-alloyed duple steel (initially for welding Uranus 45N). Weld metal: due to its high Mo and Cr contents, also used for its very good resistance to pitting and stress corrosion cracking in environments such as chloride. Chemical, acid transports, offshore, paper industries AWS SFA 5.9 ER 2209 UNS S39209 Phyweld 52N N 0.20 / 0.30 Used for welding over-alloyed duple steel and also for joining them with carbon steels or low alloyed steels. See water systems, production and transport of phosphoric acid, paper industry, offshore or depollution industries AWS SFA 5.9 ER2553 UNS S39553 Phyweld N 0.20 / 0.30 W < 1.0 AWS SFA 5.9 ER2594 Used for welding all duple and superduple steels when the highest possible corrosion resistance is required. Weld metal: ecellent resistance to intergranular corrosion, pitting corrosion and stress corrosion cracking. 6
7 Dimensional program in welded tubes As part of ArcelorMittal, Stainless Tubes Europe gives us access to the full range of Duple grades on offer. Diameter min (mm) 6 Diameter ma (mm) 10 Min thickness 0.5 Ma thickness 1 Stainless Tubes Europe is an epert in annealed tubes with lines featuring inline annealing Various lengths can be produced making use high precision cutting tools Surface Finishes and post-weld treatments Surface Finishes (Post Welding) Pickled Brushed Polished (220, 320, 400, 600) Post-weld treatments Bright annealed Inside bead rolled Please consult us for your specific requirements 7
8 Duple grades ehibit weight saving potential For comparable corrosion resistance, the Yield strength is about twice as high. Opportunities eist to save weight for tanks or equipments under static loading. 28% of weight reduction through a thickness reduction Additional reduction in welding cost DX tonnes VS tonnes Sheet thickness calculated according to the SHELL DESIGN API 650 Standard Case of a 14m Ø - 24m high silo filled with water Sheet thickness (millimeter) Depending on alloy pricing, the choice of duple may be more cost-effective even before taking in account any weight saving Current scenario Scenario 2 Scenario 3 Base 100= 304 2mm coil 2B full price current scenario L
9 A few achievements Machinery to dye (colour) tetile in 2304 Chemical tankers in 2205 Digester in 2205 Masonry support in 2304 Desalination plant in
10 A few achievements Flue gas desulphurization unit in 2205 First 2205 chemical tanker built in China Bridge arches in construction in 2304 Arco Ponte Malizia - Siena in 2304 Les Braves Omaha Beach in 2205 and 316L 10
11 Your contacts Industeel Stainless Europe Tubes Europe Precision Europe 266, rue de Châtelet 6030 Charleroi Belgium 1-5, rue Luigi Cherubini La Plaine Saint-Denis 1, rue du Prêle Ancerville 1, rue St-Hippolyte BP Pont-de-Roide Yves BOUDART Tel: Christophe SERIN Tel: Ellen BROOKE Tel: Dominique DELOBRE Tel: , rue Clemenceau Le Creusot Ino Brasil Av. Brigadeiro Faria Lima, 1.355, 20º andar - Jardim Paulistano São Paulo - SP. Brazil Stainless & Nickel Alloys BP Imphy David CARDAMONE Tel: Nicolas RODRIGUEZ Tel: Jean-Bernard COUFFIN Tel: Complementary products outside of the ArcelorMittal group: Long products (in particular in duple 2202) made by Ugitech Avenue Paul Girod Ugine transformingtomorrow Jamila ADEM Tel: ArcelorMittal All rights reserved for all countries. Cannot be disclosed, used, or reproduced without prior written specific authorization of ArcelorMittal. CONFIDENTIAL Privileged Information - ArcelorMittal proprietary information - Cover: JJAVA - Fotolia.com
DX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationEnhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus
Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,
More informationALLOY C276 DATA SHEET
ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationUrea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment
pp Urea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment J. M. SLUYTERS GEMACO SA Herstal, Belgium A presentation on special corrosion-resistant steels for
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely
More informationATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationNorth American Stainless
North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationBUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
More informationPremium Tubular Solutions Super Duplex Welded Tubes for Umbilical Applications
Premium Tubular Solutions Super Duplex Welded Tubes for Umbilical Applications Premium Tubular Solutions Innovative Tubes for Umbilical Applications Over 35 years of experience in Premium welded t ubular
More informationStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
More informationDuplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association
Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationContents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
More informationSeamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
More informationNorth American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationPerfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
More informationTechnical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and
More informationWear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationQSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149
QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically
More informationStandard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1
Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued
More informationDurcomet 100 CD4MCuN. Bulletin A/7l
Durcomet 100 CD4MCuN Bulletin A/7l Durcomet 100 Introduction Durcomet 100 is a duplex stainless steel produced to ASTM specification A995 or A890, Grade CD4MCuN (1B). It is indicated by the Flowserve casting
More informationNIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE
Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f
More informationHow To Write A Recipe Card
Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure
More informationS355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
More informationRely on Our Material Competence for Your Demanding Industrial Processes
Cast Materials Rely on Our Material Competence for Your Demanding Industrial Processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationHigh-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.
High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings
More informationLocalised corrosion of stainless steels depending on chlorine dosage in chlorinated water
acom 3-211 A corrosion management and applications engineering magazine from Outokumpu Localised corrosion of stainless steels depending on chlorine dosage in chlorinated water Introduction The European
More informationThis is Outokumpu Tornio Site
Investor visit, 7th October 2015 Hannu Hautala, SVP - Business Line Tornio This is Outokumpu Tornio Site October 7, 2015 1 October 7, 2015 2 We believe that all accidents are preventable. Our target is
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationX15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
More informationTKp. Dr. Winfried Heimann
Dr. Winfried Heimann was heading varios division of R+D, quality control and application engineering in Thyssen Edelstahlwerke and ThyssenKrupp Nirosta was being Senior Manager with Outokumpu Stainless
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 825 DATA SHEET //// Alloy 825 (UNS designation N08825) is a nickel-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress
More informationROLLED STAINLESS STEEL PLATES, SECTIONS AND BARS
STANDARD FOR CERTIFICATION No. 2.9 ROLLED STAINLESS STEEL PLATES, SECTIONS AND BARS OCTOBER 2008 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous
More informationHigh-Strength Low-Alloy Steels
High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 2205 (S32205)/ EN 1.4462 (S31803) Introduction: SS2205 is a duplex stainless steel with a microstructure, when heat treated properly,
More informationAluminium foil properties: Applications of aluminium foils and thin gauge strips in thickness below 0,50 mm:
1 ALUMINIUM FOILS AND THIN GAUGE STRIPS The year 2010 has been celebrated as the 100th anniversary of aluminium foil. Ever since the beginning in 1910 the usage of foil has been growing and products developed
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationNAS: A REFERENCE IN THE STAINLESS STEEL INDUSTRY
NAS: A REFERENCE IN THE STAINLESS STEEL INDUSTRY Cristobal Fuentes CEO of NAS Investor and Analyst s Day London, 8 th November 2011 Table of Contents I. Company Overview II. Raw Materials III. Integrated
More informationSTRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
More informationDuplex Stainless Steels
Duplex Stainless Steels Contents Answers for today s challenges...4 The expert s voice...5 Product positioning...6 Product suitability...8 Chemical composition...9 Mechanical properties...10 Physical properties...13
More informationDrill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
More information% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More informationEngineering Your Competitive Edge. Applications of Kennametal mill rolls
Engineering Your Competitive Edge of Kennametal mill rolls Tungsten carbide is a proven material for many stands in the rolling mill industry. Tungsten carbide grades developed by KENNAMETAL EPG achieve
More informationTubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
More informationWelding Alloys Group. TETRA S, TETRA V & TETRA SB Stainless flux cored wires
Welding Alloys Group TETRA S, TETRA V & TETRA SB Stainless flux cored wires Flux cored wires range Welding Alloys Group offer the world s largest range of flux and metal cored welding wires for low, medium,
More informationThird quarter 2014 November 6, 2014. Aperam 1
Third quarter 2014 November 6, 2014 Aperam 1 Disclaimer Forward-Looking Statements This document may contain forward-looking information and statements about Aperam and its subsidiaries. These statements
More informationHigh Performance Austenitic Stainless Steel
High Performance Austenitic Stainless Steel Steel grades Outokumpu EN ASTM UNS ISO 4438 1.4438 317L S31703 4438-317 03-I 4439 1.4439 317LMN S31726 4439-317-26-E 1.4539 N08904 4539 089 04-I 1.4547 S31254
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationMaterial data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
More informationStandard Specification for Tool Steel High Speed 1
Designation: A 600 92a (Reapproved 2004) Standard Specification for Tool Steel High Speed This standard is issued under the fixed designation A 600; the number immediately following the designation indicates
More informationStandard Specification for Tool Steels Alloy 1
Designation: A 68 8 Standard Specification for Tool Steels Alloy This standard is issued under the fixed designation A 68; the number immediately following the designation indicates the year of original
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationSeawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D.
OSNA -10 Copper-Nickel Lined Pipes Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D. KME Germany AG & Co. KG Copper-Nickel Lined Pipes [GB] Member of the KME Group
More informationQualification of welding procedures for duplex stainless steels
TIP 0402-29 ISSUED - 2001 2001 TAPPI The information and data contained in this document were prepared by a technical committee of the Association. The committee and the Association assume no liability
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationHeavy Plates. Ingots & Forged Products
Heavy Plates Ingots & Forged Products Europe - Plate Three specialised mills at your service NLMK Europe - Plate gathers under one name three specialists, using technologically advanced production methods.
More informationLecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
More informationGUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationJIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
More informationActivating Your Ideas. Tailor-made stainless solutions for chemical tankers
Activating Your Ideas Tailor-made stainless solutions for chemical tankers Because every ship is one of a kind When moving precious cargo there is no substitute for stainless steel to getting the most
More informationRev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.
Rev. 00 COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Specification AWS JIS EN ISO Z3211 A5.1 2560-A E7016 E4916 E42 E4916 E42 3 B 1 2 Applications Structures
More informationSandvik SAF 2707 HD (UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments
(UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments lec ture no. s -51-63. 11/ 20 06 sandvik r ese arch and de velopment centr e Kenneth Göransson, Marie-Louise Nyman,
More informationALUMINIUM. Conductors
ALUMINIUM Conductors TABLE OF CONTENTS The ALUMINIUM AND ALUMINIUM ALLOYS WIRES technical data Aluminium wires...p 3 in this catalog Hard aluminium are given for _hard aluminium information Other states
More information