AC and DC Axial Fans Part Numbering Guide

Transcription

1

2 and D xial Fans ing uide xample: for D Fan FD1 025BMW11 FD B M W SRIS FD: D Fans F: Fans up to mm FK: Fans mm and above FN TYP 1: xial 3: hip ooler 2: xial apacitor Motor 4: Blower Fan FN SIZ (mm) FRM THIKNSS (mm) VOLT : 3.3 VD F: VD B: 5 VD N: 115 V : 12 VD Q: 230 V D: VD R: 115/230 V : 48 VD BRIN : 1 Ball 1 Sleeve : eramic S: Sleeve B: 2 Ball H: Hydro Dynamic SPD : Ultra low H: High T: Top High L: Low J: Ultra High M: Medium K: Super High TRMINTION W: PV Wire T: Terminal FRM & IMPLLR MTRIL 1: Plastic/Plastic 3: Metal/Plastic 2: Plastic/Metal 4: Metal/Metal FUNTION 1: By Impedance 5: By I with Variable Speed Sensor (VS) 9: PWM ontrol D: IP55 2: By I : By Transistor with Speed Sensor (F) : VS+RD : IP7 3: By I with larm (RD) 7: Two Speed B: PWM+F F: By Thermal 4: By I with Speed Sensor (F) 8: VS+F : RD+F SPIL FTUR 1

3 and D xial Fans Qualtek lectronics offers a complete line of low cost & D axial fans produced in high tech facilities assuring high quality standards with large production capabilities. Qualtek s and D fans are offered in a large variety of bearing types: 2Ball, 1Ball 1Sleeve, Sleeve, and Hydro Dynamic with a wide range of speeds. fans are available from 115 to 230V and sizes from mm to 2mm, D fans are available from 3.3VD and sizes from 20mm to 254mm with a large array of functions and special features. Fan Specifications Series Dimensions (mm) Dimensions (in) ir Flow (FM) Voltage (V) Noise Level (db/) F1025 x x 25 3 x F1038 x x 38 3 x F1025 x x x F125 x x x F138 x x x FK x x 51.7 x 5.9 x FK x x 51.7 x 5.9 x FK x 17 x x FK215 1 x 1 x x FK x 205 x x FK x 89 (round) x FK x 2 x x FK x 2 x x pprovals D Fan Specifications Series Dimensions (mm) Dimensions (in) ir Flow (FM) Voltage (VD) Noise Level (db/) FD x 25 x x , FD x 30 x 10 1 x , FD1010 x x 10 x , 12, FD1020 x x 20 x , 12, FD1010 x x x , 12, FD1020 x x 20 x , 12, FD1025 x x 25 x , 12, FD1015 x x 15 3 x , 12, FD1025 x x 25 3 x , FD1025 I x x 25 3 x , FD1032 x x 32 3 x ,, FD1038 x x 38 3 x , FD1025 x x x , FD1025 I x x x ,, FD125 x x x ,, FD132 x x x ,, FD138 x x x ,, FD x 127 x 38 0 x ,, pprovals 2

4 luminum Fan Filters 0 Series These tested and proven filters provide maximum airflow with effective filtering. Mill and stainless steel finishes are offered to enhance MI/RFI shielding as well as an anodized finish for aesthetic purposes. The tightly woven corrugated mesh screen is encased in a formed aluminum frame built for ruggedness and durability. The filters are designed to fit any standard mm, mm, mm and mm tubeaxial fan. The units are easily washed in a solvent or degreaser and can be mounted directly to the fan or to a panel. mm Use With Fan Size mm in. Finish Height (sq.) Size (in) Thickness Mounting Hole Diameter Mounting Hole enter mm mm 02B 02M 02SS nodized (Black) Mill (No Finish) Stainless Steel mm 0325B 0325M 0325SS nodized (Black) Mill (No Finish) Stainless Steel mm mm 02B 02M 02SS nodized (Black) Mill (No Finish) Stainless Steel mm mm 04B 04M 04SS nodized (Black) Mill (No Finish) Stainless Steel Fan Power ords 07 Series FanS offers four configurations of high quality fan power cords designed to be used with tubeaxial fans with a strain relief for added safety. UL and cul rated 10 mps/125 Volt with special configurations such as daisy chain, special length and color are available. ord Length mm in. Style Figure ordage B SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) 07100SP SP SP B B B SPT1(18/2) SPT1(18/2) SPT1(18/2) D SP SP SP D D D SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) F 07190SP SP SP F F F SPT1(18/2) SPT1(18/2) SPT1(18/2) TType TType TType TType TType TType TType SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) H 07199SP SP SP TType TType TType H H H SPT1(18/2) SPT1(18/2) SPT1(18/2) 3

5 Wire Form Fan uards 08 Series ll wire form fan guards are produced in our ISO 9001 certified facility to assure compliance to our rigid specifications. vailable for fan sizes 25mm to 254mm with a high quality nickel chrome finish as our standard. lso available in black finish & stainless steel. 085 (25mm) 0834 (30mm) (mm) (mm) (mm) (mm) (mm) (mm) 0815 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 0814 (mm) (mm) (mm) (127mm) 08 (127mm) (mm) 0812(mm) (mm) (mm) (17mm) (254mm) (254mm) 083SS (254mm) * ** ** SS For Use With Fan Size Rib Material Dia. Ring Material Dia. Mounting Hole enters * Note: dd to part number for: Black (02), Stainless Steel (SS) (example: Black mm Fan uard.) ** Does not meet 1/4 max. ring spacing. Outside Ring Dia. Thickness mm in. mm in. mm in. mm in. mm in. mm in / / /

6 Plastic Fan uards 09 Series The 09 Series low cost plastic fan guards produced with UL 94V0 material are designed for tubeaxial fans with design considerations given to maximize airflow with reduced noise levels. Space saving models (Thin) designed for & mm. 00 (mm) 0 (mm) 052 (mm) 090 (mm) Thin (mm) (mm) 092 (mm) 093 (mm) 09 (mm) (mm) (mm) Thin (mm) 094 (mm) 09 (mm) 0951 (mm) For Use With Fan Size Mounting Hole enters Mounting Hole Dia. 4 Places Width Thickness mm in. mm in. mm in. mm in. mm in. 1 1/ Fan Silencer and ccessories Noise is the number one problem for axial fans that are used for electronic cooling. It is generally caused by vibration between the housing and fan. To prevent this problem, we have developed a method that eliminates noise and makes mounting effortless. With the patented rubber elastic sleeves, you can fasten axial fans without screws quickly and safely with four mushroom formed pegs on a mounting plate or housing wall. QLM2010 QLM3010 QLM10 QLM10 QLM11910 QLM Fan Vibration Sleeve B Panel Thickness Inch mm Inch mm Inch mm Inch mm MI Filter Shield for QLM Sleeves QSB01 QSB01 QSB01 QSB01 QSB11901 Filter Media for QLM Sleeves QF01 QF01 QF01 QF01 QF11901 B F Inch mm Inch mm Inch mm B D Inch mm Inch mm Inch mm Plastic Fan uards for QLM Sleeves QS02 QS02 QS02 QS02 QS11902 QLN31100 B Inch mm Inch mm Inch mm Rivets With the specially designed rivets, metal fan guard grills can be attached into the holes of the mushroom formed pegs from the fan sleeves. 5

7 FanS offers a unique fan filter package consisting of a guard, foam filter media and media retainer for the removal of dust and contaminating particles with quick and simple installation. Fig. Plastic Fan Filter ssemblies 09 Series mm 1. Fig. Description Mounting Hole enters Mounting Hole Diameter 4 Places Width 4 Places Thickness mm in. mm in. mm in. mm in. Retainer Foam Media 00F/30 00F/45 00F/ 00F/100 00M/30* 00M/45* 00M/* 00M/100* 00 00R mm 2. Fig. uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only uard 0F/30 0F/45 0F/ 0F/100 0M/30* 0M/45* 0M/* 0M/100* 0 0R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only Fig. B uard mm 3.13 Fig. B 09325F/ F/ F/ 09325F/ M/30* 09325M/45* 09325M/* 09325M/100* R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only mm 3.2 Fig. B Foam Media Retainer 092F/30 092F/45 092F/ 092F/ M/30* 092M/45* 092M/* 092M/100* R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only mm 4. Fig. B Fig. 094F/30 094F/45 094F/ 094F/ M/30* 094M/45* 094M/* 094M/100* R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only Retainer Foam Media uard mm.00 Fig. 09F/30 09F/45 09F/ 09F/100 09M/30* 09M/45* 09M/* 09M/100* 09 09R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only (2) 0(2) 0(2) 0(2) 0(2) * ach package contains 5 pieces ** Pores per Inch (PPI)

8 Product Profile FanS Division & D Fans and ccessories Low cost, high tech & D axial fans with sizes ranging from 25mm 2 mm, D voltages from 3.3VD VD and voltages from 115V 230V and many special features such as IP55 and IP7 rated, speed sensors, alarm functions and much more upon request. ach fan is offered with a variety of bearing types : 2ball, 1ball 1sleeve, sleeve only, and our newly developed hydro dynamic bearing with better performance than sleeve and lower cost than 2 ball bearings. very fan is available with a wide range of speeds from ultra low to super high speed. Our fan accessories are famous worldwide and consist of wire form and plastic guards, plastic air filters, aluminum and stainless steel air filters, fan cords, and our patented noise reduction vibration sleeves. Primary Power omponents Division Receptacles complete line of inlets, outlets, multifunction modules with major international approval marks thus assuring high safety standards and help customers comply with international regulations. Modern production methods enable us to manufacture costeffective and reliable components. full range of products are maintained in inventory for quick ontime deliveries. ustom designs are available upon request. ircuit Breakers QLB and QMB series are compact and cost effective thermal circuit breakers with a wide range of amp ratings from 3 and offered in single pole and pushtoreset with safety agency certifications. We offer a large variety of bushing types, terminals, name plates, button colors and printing with custom configurations available. MI Filters MI/RFI power line filters are designed to meet most international safety agency requirements. These filters help customers meet F and VD emission standards. Our line consists of many standard configurations such as block type, filter with power line connector, and various filters with multifunctional modules. ustom designs are available upon request. Power ords large selection of North merican and International Power ords that have been designed to comply with North merican and international safety agency regulations to insure safe and reliable products. Offered in a wide selection of plugs and connectors available in various cable insulations, voltage ratings, colors, lengths, shielding and a full range of hospital grade certified power cords. ustom configurations and strain reliefs are available upon request. Power Supplies full range of low cost, high reliability and energy saving switch mode /D power supplies consisting of enclosed, open frame models and waterproof LD drivers; our enclosed versions are rated from 15W 0W, open frame from 20W 125W and LD drivers with constant current 25W 200W and constant voltage 25W 300W. ll models have universal voltage input and a variety of output voltages ranging from 3.3V 445V and some models include power factor correction to increase efficiency and reduce power losses. ll of our power supplies meet or exceed the RoHS U and the hinese directives and are certified with worldwide safety agencies to ensure a safe and reliable product. Wire Management, able ssemblies & Interconnect Division able ssemblies We offer a wide selection of standard and custom cable assemblies, specializing in DVI, HDMI, USB and Fiber Optic and also producing flat ribbon cables, monitor cables, networking cables and an extensive offering of custom cable assemblies and wire harnesses. able Ties & ccessories Our low cost, high reliability cable nylon ties are available in a variety of styles including miniature, intermediate, standard and heavy duty. Specialty cable ties include releasable pawl type, stainless steel ball lock, head mount, push mount, marker ties, double loop, beaded and 4way cable tie mounts. able ties are available in various material types including ultraviolet, heat stabilized, fire retardant and also are available in a range of colors. ustom designs and colors available upon request. Heat Shrink Products Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high voltage insulation, molded parts and end caps, cold shrink, wide range of shrink tubing kits and heat shrinkable cable and wire identification tubing. International Procurement Services Division Procurement Services With over 30 years of global business experience, Qualtek s IPS division provides a complete range of services from component sourcing to complete turnkey projects. With our extensive knowledge of the major global manufacturing regions, this enables us to have access to the newest technology, highest quality, and the most cost effective production methods. 7 Jenther Dr. * Mentor, Ohio 4 * US Telephone: * Fax: mail: mailbox@qualtekusa.com Web: FNS 0300