Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv

Transcription

1 Catalog HA Edition 2016 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Medium-Voltage Switchgear siemens.com/nxair

2 Application Typical applications R-HA tif R-HA tif NXAIR circuit-breaker switchgear is used in transfmer and switching substations, mainly at the primary distribution level, e.g.: Application Public power supply Power supply companies Energy producers System operats. R-HA tif R-HA tif Photo: Harald M. Valderhaug Application Industry and offshe Automobile industry Traction power supply systems Mining industry Lignite open-cast mines Chemical industry Diesel power plants Electrochemical plants Emergency power supply installations Textile, paper and food industries Iron and steel wks Power stations Petroleum industry Offshe installations Petrochemical plants Pipeline installations Data centers Shipbuilding industry Steel industry Rolling mills Cement industry. 2 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

3 Contents Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Medium-Voltage Switchgear Catalog HA Invalid: Catalog HA siemens.com/nxair Application Page Typical applications 2 Customer benefit Ensures peace of mind 4 Saves lives 5 Increases productivity 6 Saves money 7 Preserves the environment 8 Design Classification 9 Basic panel design, operation 10 and 11 Compartments 12 Components Vacuum circuit-breaker 13 Vacuum contact 14 Current transfmers 15 Voltage transfmers 16 Low-voltage compartment 17 Technical data 17.5 kv Electrical data 18 Product range, switchgear panels 19 and 20 Dimensions 21 Room planning 22 Transpt and packing 23 Technical data 24 kv Electrical data 24 Product range, switchgear panels 25 and 26 Dimensions 27 Room planning 28 Transpt and packing 29 Standards Standards, specifications, guidelines 30 and 31 The products and systems described in this catalog are manufactured and sold accding to a certified management system (acc. to ISO 9001, ISO and BS OHSAS 18001). Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

4 Customer benefit Ensures peace of mind F power supply companies and industrial plants, the platfm concept of the NXAIR family introduced at all production locations has very concrete advantages: Smooth operation, exemplary availability and optimal safety. Features No handling of insulating gas and low and high pressure moniting required As insulating medium, air is always available Facty-assembled, type-tested switchgear accding to IEC VDE Platfm concept introduced wldwide, centrally controlled development, local manufacture Use of standardized block-type current transfmers Use of standard components available wldwide, locally manufactured components, and consideration of regional standards Me than 450,000 air-insulated switchgear panels of Siemens in operation wldwide Use of maintenance-free vacuum circuit-breakers contacts Type testing of the vacuum circuit-breaker and the make-proof earthing switch in the panel Pressure-resistant partitions Flexibility regarding the low-voltage equipment (removable compartment, plug-in wires) Quality assurance in accdance with DIN EN ISO Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

5 Customer benefit Saves lives All switchgear types of the NXAIR family are approved with internal arc classification IAC A FLR, loss of service continuity categy LSC 2B and partition class PM. This makes them suitable f universal installation, meeting the highest requirements regarding personal safety. Features All operations with closed high-voltage do Metallic enclosure, earthed shutters and partitions Internal arc classified switchgear accding to IAC A FLR; front, lateral and rear accessibility; f all sht-circuit currents and an arc duration of 1 s, optionally 0.1 s Loss of service continuity categy LSC 2B (separate partitions f busbar, connection and switching-device compartments) Partition class PM (metal-clad in pressure-resistant design) Unambiguous position indicats and control elements on the high-voltage do Use of vacuum circuit-breakers contacts Standard degree of protection IP3XD; different degrees of protection possible as an option Positively driven shutters (separately lockable) Logical mechanical interlocking system. Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

6 Customer benefit Increases productivity Properties such as modular design, type tests of the circuit-breaker in the switchgear, confinement of an internal arc to the respective compartment, and thus maximum operational reliability, contribute to optimum operation and a remarkable increase of productivity. Features Loss of service continuity categy LSC 2B (separate partitions f busbar, connection and switching-device compartments) Partition class PM Maximum degree of protection IP51 possible Positively driven shutters Use of standardized block-type current transfmers Cable testing without isolating the busbar Functions such as establishment of the isolating distance, as well as feeder and busbar earthing, can be completely controlled from remote Confinement of an internal arc to the respective compartment up to 31.5 ka Use of maintenance-free vacuum circuit-breakers contacts Control cables in metallic wiring ducts Easy access to all panel components. 6 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

7 Customer benefit Saves money The compact design of the NXAIR family pays twice f owners due to the use of the new SION circuit-breaker series. On the one hand, building costs can be reduced in this way, and on the other hand, the maintenance-free circuit-breakers and the modular design enable continuous operation without expensive shutdown times. Features Use of maintenance-free vacuum circuit-breakers contacts Maintenance-free switchgear within up to 10 years Interruption of operation reduced to a minimum by logical mechanical interlocking system Minimized space requirements (reduced building investments) due to compact design and flexible cable connection options flexible pressure relief duct systems. Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

8 Customer benefit Preserves the environment Air used as insulating medium, local production locations with sht transptation ways and times, as well as a service life of me than 30 years, optimize the total energy balance. Features As insulating medium, air is absolutely neutral to the environment Local production presence in all regions, minimized energy consumption (CO 2) regarding transpt Service life of me than 30 years optimizes the energy balance additionally The materials used are fully recyclable without special knowledge Easy disposal. 8 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

9 Design Classification Circuit-breaker switchgear NXAIR is facty-assembled, type-tested, metal-enclosed and metal-clad switchgear f indo installation accding to IEC / VDE and cresponds to the following classifications. R-HA tif Loss of service continuity categy and partition class Loss of service continuity categy LSC 2B Partition class PM Accessibility to compartments Busbar compartment Switching-device compartment Connection compartment Internal arc classifications The following internal arc classifications are fulfilled: IAC A FLR, Isc, t IAC A F L R Isc Tool-based Interlock-controlled Interlock-controlled tool-based = Internal arc classification = 300 mm distance of indicats f test (installation in closed electrical service location) = Front arrangement of indicats f test = Lateral arrangement of indicats f test = Rear arrangement of indicats f test = Test current f NXAIR 17.5 kv up to 50 ka = Test current f NXAIR 24 kv up to 25 ka t = Arc duration 1 s, optionally 0.1 s In this way, NXAIR switchgear is suitable f unrestricted application (wall- free-standing arrangement) in electrical service locations up to the maximum sht-circuit ratings. Type approval NXAIR switchgear has been type-approved by the following classification societies: Lloyds Register (LR) Det Nske Veritas (DNV) The switchgear is therefe also approved f application on ships and platfms. National approval GOST By certification in the system GOST R in Russia, NXAIR switchgear is approved f application at the voltage levels 6 kv, 10 kv and 20 kv. Compliance with the requirements of the GOST standard has been confirmed in the Declarations No. POCC DE.MM04.Д02090 and No. POCC DE.MM04.Д The approval is valid in the countries Russia, Belarus, Kazakhstan and Ukraine. The application of NXAIR in all transmission and distribution systems in Russia is additionally authized by the FSK/MRSK Approval No of May 17, Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

10 Design Basic panel design, operation Operation at the panel Features Integrated mimic diagram Display of the respective switch positions f circuit-breaker CLOSED/OPEN, disconnected position, earthing switch CLOSED/OPEN, on the integrated mimic diagram Unambiguous assignment of actuating openings and control elements to the cresponding position indicats All switching operations always with high-voltage do closed Ergonomically favable height f all control and indicat elements Option: Verification of safe isolation from supply f feeder busbar by means of the capacitive voltage detecting system with panel front closed. Interlocks Interlocking conditions specified accding to IEC / VDE are fulfilled Feeder earthing switch can only be operated with switching device in disconnected position Switching device can only be racked on the movable part with the associated switching device OPEN position and with earthing switch OPEN Switching device can only be operated in interlocked disconnected service position. Beyond the specifications of the standards Coding prevents insertion of switching devices with a lower rated nmal current into panels with a higher rated nmal current Interlocking between the high-voltage do and the position of the withdrawable part Option: Electromagnetic interlocks, mechanical key interlocking systems, padlocks. Basic panel design (example) 1 Do to low-voltage compartment 2 Protection device 3 Option: Capacitive voltage detecting system f feeder and busbar 4 High-voltage do 5 Mimic diagram 6 CLOSE-OPEN actuating openings f the circuit-breaker, opening f spring charging 7 Inspection window to recognize the CLOSED-OPEN indicat of the circuitbreaker, closing spring charged indicat, operations counter 8 Handle f opening the high-voltage do 9 Actuating opening f racking the switching device 10 Mechanical position indicat f feeder earthing switch A Switching-device compartment B Busbar compartment C Connection compartment D Withdrawable circuit-breaker E Low-voltage compartment 11 Actuating opening f feeder earthing switch, manual optionally mot operation 12 Mechanical position indicat f withdrawable part 13 Pressure relief duct, if required with top-mounted arc absber 14 Busbars 15 Bushing-type insulat 16 Block-type current transfmer 17 Voltage transfmer 18 Cable connection 19 Make-proof earthing switch 20 Low-voltage connection, plug-in type 21 Operating and interlocking unit f circuit-breaker 22 Vacuum interrupters 23 Contact system 24 Withdrawable part f racking the switching device and f earthing, manual optionally mot operation 25 Option: Withdrawable voltage transfmers 10 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

11 Design Basic panel design, operation Basic panel design (example) Duplex (back-to-back) E A B B A E HA a eps A B D D C C Do to low-voltage compartment 2 Protection device 3 Option: Capacitive voltage detecting system f feeder and busbar 4 High-voltage do 5 Handle f high-voltage do 6 Mimic diagram 7 CLOSE-OPEN actuating openings f the circuitbreaker, opening f spring charging 8 Inspection window to recognize the CLOSED-OPEN indicat of the circuit-breaker, closing spring charged indicat, operations counter 9 Actuating opening f racking the switching device 10 Mechanical position indicat f feeder earthing switch 11 Actuating opening f feeder earthing switch, manual optionally mot operation 12 Mechanical position indicat f withdrawable part 13 Pressure relief duct, if required with top-mounted arc absber 14 Busbars 15 Bushing-type insulat 16 Block-type current transfmer 17 Voltage transfmer 18 Cable connection 19 Make-proof earthing switch 20 Low-voltage connection, plug-in type 21 Operating and interlocking unit f circuit-breaker 22 Vacuum interrupters 23 Contact system 24 Withdrawable part f racking the switching device and f earthing, manual optionally mot operation A Switching-device compartment B Busbar compartment C Connection compartment D Withdrawable circuit-breaker E Low-voltage compartment Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

12 Design Compartments Switching-device compartment Enclosure made of sendzimir-galvanized sheet steel Pressure relief upwards Panel front powder-coated with epoxy resin Standard col RAL 7035 Separate shutter mechanism f opening and closing the Busbar compartment Connection compartment High-voltage do pressure-resistant in the event of internal arcs in the panel Pressure-resistant partitions to connection and busbar compartments Lateral metallic wiring duct f laying the control cables Low-voltage plug connect f connection of control cables between primary part and secondary part Switching-device compartment f the different panel versions with withdrawable devices: Vacuum circuit-breaker 1) Vacuum contact Disconnect link Metering unit Endurance classes f: Circuit-breaker: E2, M2, C2 Isolating distance (withdrawable part): M0 manually partly mot-operated f withdrawable circuit-breaker and disconnect link Vacuum contact 250,000, 500,000 1,000,000 I N Busbar compartment Enclosure made of sendzimir-galvanized sheet steel Pressure relief upwards Option: Transverse partition from panel to panel f NXAIR Standard: Transverse partition from panel to panel f NXAIR f 40 ka and 50 ka Busbars made of flat copper, bolted from panel to panel Option: Insulated Pressure-resistant partitions to connection and switching-device compartment, pressure-resistant rear wall Shutters can be opened and locked separately Bushing-type insulats f suppting the busbars and f accommodating the upper fixed contacts f the switching device Option: Coupling electrode f capacitive voltage detecting system. Additional compartments (option) f busbar components, see also product range Top-mounted compartment over the busbar compartment, within the pressure relief duct Separate pressure relief of the additional compartment via pressure relief flaps Options: Possibility of installing the following components (but not f panels with natural and fced ventilation, see also product range) Voltage transfmers Make-proof earthing switch (endurance class: M0, E1), manual optionally mot operation Bar cable connection. Connection compartment Enclosure made of sendzimir-galvanized sheet steel Pressure relief upwards through rear pressure relief duct Pressure-resistant partitions to switching-device and busbar compartments Shutters can be opened and locked separately Earthing busbar Option: Installation of bushing-type insulats block-type current transfmers Option: Coupling electrode f capacitive voltage detecting system Pressure-resistant flo cover Connection from front/bottom, from rear/bottom, from rear/top Suitable f connection of: Single-ce XLPE cables up to 6 x 500 mm² depending on the rated nmal current and other built-in components Three-ce XLPE cables 3 x 240 mm² per panel depending on the rated nmal current and other built-in components Flat copper bars with bushings in a base plate fully-insulated bars including flo cover Installation of voltage transfmers Cast-resin insulated 3 1-pole Fixed-mounted, without primary fuses Or withdrawable with primary fuses in a separate compartment, with bushings and shutters to the connection compartment f NXAIR 17.5 kv; f NXAIR 24 kv withdrawable with fuses Make-proof earthing switch With manual operating mechanism, optionally mot operating mechanism In addition to the standard interlock: Earthing switch optionally lockable electromagnetically interlocked against the withdrawable switching device Endurance class f earthing switch: M0, E1 Surge arrester surge limiter Surge arrester f protecting the switchgear against external overvoltages Surge limiter f protecting consumers against switching overvoltages while operating mots with starting currents 600 A. 1) Available f NXAIR 24 kv in combination with withdrawable HV HRC fuses in the connection compartment as switch-fuse function f particularly high demands regarding switching capacity and switching rate. 12 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

13 Components Vacuum circuit-breaker Features Accding to IEC , VDE In NXAIR f 15 kv, 50 ka also available as generat circuit-breaker accding to IEEE C Suitable f all switching duties Sted-energy spring mechanism with mot operating mechanism, manual operation always possible Circuit-breaker also available in combination with withdrawable HV HRC fuses in the connection compartment as switch-fuse function f particularly high demands regarding switching capacity and switching rate, f NXAIR 24 kv Racking the circuit-breaker with manual operating mechanism, optionally with mot operating mechanism 64-pole low-voltage plug connect between circuitbreaker and fixed part Maintenance-free operating mechanisms under nmal climatic conditions and f the max. permissible number of operating cycles. R-HA25-355a.tif SION vacuum circuit-breaker 3AE HA a eps R-HA tif R-HA tif R-HA tif Electrical data f NXAIR 17.5 kv NXAIR 17.5 kv NXAIR 24 kv Rated operating voltage up to 17.5 kv up to 17.5 kv 24 kv Rated sht-circuit breaking current Rated sht-time withstand current Rated sht-circuit making current Rated peak withstand current up to 40 ka 50 ka up to 25 ka up to 40 ka/3 s 50 ka/3 s up to 25 ka/3 s up to 100/104 ka up to 125/130 ka up to 63/65 ka up to 100/104 ka up to 125/130 ka 1) up to 63/65 ka Rated nmal current up to 3150 A up to A up to 2500 A Endurance class E2, M2, C2 E2, M2, C2 E2, M2, C2 1) Max. 137 ka in combination with generat circuit-breaker accding to IEEE C Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

14 Components Vacuum contact Features Accding to IEC , VDE Suitable f operating consumers with high switching rates Sht-circuit protection via up to 2 HV HRC fuses connected in parallel Voltage supply of contact coil via primary-fused control transfmer via external power supply Optional latching module f the contact Racking the contact via manual operating mechanism 64-pole low-voltage plug connect between contact and fixed part Maintenance-free operating mechanisms under nmal climatic conditions and f the max. permissible number of operating cycles Contact arms generally with silver-plated round contacts. R-HA eps Contact-fuse combination 3TL6 R-HA eps R-HA25-361b tif Electrical data f 3TL6 in NXAIR 3TL8 in NXAIR Rated operating voltage bis 12 kv up to 7.2 kv Rated sht-time withstand up to 8 ka up to 8 ka current 1) Rated nmal current 2) 400 A 400 A Number of operating cycles: of contact, mechanical of interrupters, mechanical of contact, electrical IN Withdrawable contact 3TL6, HV HRC fuses and, if applicable, control transfmer up to 1,000,000 up to 1,000,000 up to 1,000,000 Withdrawable contact 3TL8, HV HRC fuses and, if applicable, control transfmer up to 1,000,000 up to 250,000 up to 250,000 1) Can be used in switchgear with sht-time withstand currents up to 50 ka due to the current limitation provided by HV HRC fuses. 2) Depending on the HV HRC fuses installed. 14 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

15 Components Current transfmers Features Inductive block-type current transfmer principle accding to IEC , VDE , standardized, available wldwide, inductive bushing-type current transfmer principle f the switch panel of NXAIR 24 kv accding to the same IEC / VDE standards Cast-resin insulated Option: With coupling electrode f capacitive voltage detecting systems f bushing-type current transfmers Secondary multiratio possible Current transfmer certifiable Low-power principle f current measuring accding to IEC , VDE as option Cast-resin insulated, in same housing as blocktype current transfmer, as ring-ce transfmer Secondary voltage: 225 V Accuracy class up to 0.5 5P Adjusted numerical protection, control and measuring relays are available Low-power principle f voltage measuring Integrated in above housing Combined with current measuring in low-power technology F technical design, see page 16. R-HA eps Block-type current transfmer up to A Electrical data f Operating voltage up to 24 kv Rated primary current up to A Sht-time thermal current up to 50 ka Duration of sht-time current 1 s 3 s Rated peak withstand current up to 130 ka 1) Number of secondary ces up to 3 Secondary current 1 A 5 A Accuracy classes Measuring FS5/FS10 Protection P/10P Rating up to 30 VA HA a eps 1) 137 ka, possible when combined with generat circuit-breakers Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

16 Components Voltage transfmers Features Inductive principle accding to IEC , VDE Cast-resin insulated, single-pole Option: With earth-fault winding Double-pole voltage transfmer Low-power principle accding to IEC , VDE Integrated in current transfmer housing, see page 15 Cast-resin insulated, single-pole Constructional principle of resistive voltage divider Adjusted numerical protection, control and measuring relays are available Rated secondary voltage 3.25 V/ Accuracy class 0.5 3P. R-HG tif Voltage transfmer, fixed-mounted R-HA eps Voltage transfmer, withdrawable with primary fuses HA a eps Electrical data f Primary operating voltage Secondary operating voltage up to 24 kv Accuracy classes 0.2/ 0.5/ 1.0 Rating up to 120 V up to 120 V/ 3 up to 200 VA 16 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

17 Components Low-voltage compartment Features Low-voltage compartment f accommodation of all protection, control, measuring and metering equipment Partitioned safe-to-touch off the high-voltage part Low-voltage compartment can be removed, as all bus wires and control cables are plugged in Option: Test sockets f capacitive voltage detecting system at the feeders the busbar Option: Higher low-voltage compartment Option: Separation wall from panel to panel Low-voltage cables are flexible and protected by metal covers Connection of withdrawable part and panel wiring to low-voltage compartment via 10-pole, coded plug connects Bus wires are pluggable from panel to panel. R-HA25-292a eps R-HA eps Do of low-voltage compartment (example) HA a eps Low-voltage compartment with built-in equipment (example) Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

18 Technical data 17.5 kv Electrical data R-HA eps Maximum values 17.5 kv; 40 ka; A Rated values up to 40 ka Rated voltage kv frequency Hz 50 /60 50 /60 50 /60 sht-duration power- kv 20 1) 28 1) 38 frequency withstand voltage (phase-to-phase, phase-to-earth) lightning impulse withstand kv voltage (phase-to-phase, phase-to-earth) sht-circuit breaking max. ka current sht-time withstand max. ka current, 3 s sht-circuit making current 2) max. ka 100 / / / 104 peak withstand current 2) max. ka 100 / / / 104 nmal current of busbar max. A nmal current of feeders: With circuit-breaker With contact 3) With disconnect link Bus sectionalizer Busbar connection panel Rated values 50 ka max. A max. A max. A max. A max. A Rated voltage kv frequency Hz 50 /60 50 /60 50 /60 sht-duration powerfrequency kv 20 1) 28 1) 38 withstand voltage (phase-to-phase, phase-to-earth) lightning impulse withstand kv voltage (phase-to-phase, phase-to-earth) sht-circuit breaking max. ka current sht-time withstand current, 3 s max. ka sht-circuit making current 2) max. ka 125 / ) 137 4) 137 4) peak withstand current 2) max. ka 125 / ) 137 4) 137 4) nmal current of busbar max. A nmal current of feeders: With circuit-breaker With contact 3) With disconnect link Bus sectionalizer Busbar connection panel max. A max. A max. A max. A max. A R-HA eps Maximum values 17.5 kv; 50 ka; A 1) 32 kv 42 kv optional f GOST standard 2) Values f 50 Hz: 100 ka 125 ka 60 Hz: 104 ka 130 ka 3) Current values dependent on HV HRC fuses, f GOST standard max. 32 kv sht-duration power-frequency withstand voltage 4) 137 ka in conjunction with 3AK7 generat circuit-breaker 18 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

19 Technical data 17.5 kv Product range, switchgear panels Circuit-breaker panel Disconnecting panel Current transfmer Voltage transfmer Withdrawable voltage transfmers with primary fuses Make-proof earthing switch, optionally manual mot operating mechanism Capacitive voltage detecting system Cable sealing ends 1), max. 6 x 500 mm 2 per phase Contact panel 2) (Optionally with redundant fans) only required f 2500 A and 3150 A in 800 mm panels f 40 ka, f A in 1000 mm panels. Metering panel Bar feeder Withdrawable circuit-breaker, optionally manual mot operating mechanism Withdrawable contact with HV HRC fuses Withdrawable contact with control transfmer and HV HRC fuses HA b eps F other components in the busbar and connection compartments, see page 12. HA g eps 1) The details refer to conventional single-ce sealing ends, and depend on the rated nmal current and other built-in components. HA eps Withdrawable disconnect link with manual operating mechanism Fced ventilation Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

20 Technical data 17.5 kv Product range, switchgear panels Bus sectionalizer (mirr-image installation also possible) Current transfmer Voltage transfmer Make-proof earthing switch, optionally manual mot operating mechanism Withdrawable panel Bus riser panel Capacitive voltage detecting system Cable sealing ends 3), max. 6 x 500 mm 2 per phase Bar feeder Busbar connection panel Withdrawable circuit-breaker, optionally manual mot operating mechanism Withdrawable disconnect link with manual operating mechanism HA d eps F other components in the busbar and connection compartments, see page 12. 1) Current transfmers only possible in combination with withdrawable disconnect link. 2) In case of withdrawable metering unit, voltage transfmers and earthing switches on the busbar are not possible. 3) The details refer to conventional single-ce sealing ends, and depend on the rated nmal current and other built-in components. 4) (Optionally with redundant fans) only required f 2500 A and 3150 A in 800 mm panels f 40 ka, f A in 1000 mm panels. Withdrawable voltage transfmers with primary fuses Fced ventilation HA eps 20 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

21 Technical data 17.5 kv Dimensions HA k eps H1 H2 H3 H4 B T NXAIR 17.5 kv; 40 ka; A NXAIR 17.5 kv; 50 ka; A Width in mm Height in mm Depth in mm Panel type Rated nmal current B Circuit-breaker panel, disconnecting panel 1000 A 1250 A 1600 A 2000 A 2500 A 3150 A A H1 H2 Bus sectionalizer 1250 A 2500 A Sht-time withstand current 31.5 ka 40 ka 50 ka 600 4) x x /1000 1) 800/1000 1) x x x 800 2) Metering panel Contact panel 400 A 435 / / Standard panel standard panel with natural ventilation With higher low-voltage compartment additional compartment f busbar components x x H3 With fced ventilation H4 With optional arc absber 3) f 12 kv, > 25 ka, generally f 17.5 kv T Single busbar, all panel types (except contact panel) ) ) 1650 Contact panel ) 800 mm with fced ventilation 2) Dependent on rated nmal current and design of bus riser panel 3) Number of absbers dependent on switchgear configuration 4) Disconnecting panel not in 600 mm 5) Panels with a rated nmal current of 3150 A A in 1540 mm depth Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

22 Technical data 17.5 kv Room planning Pressure relief out of the switchgear room through a pressure relief duct Pressure relief into the switchgear room through absbers Lateral pressure relief duct Rear pressure relief duct Type of pressure relief Rated voltage Ceiling height D in mm f sht-circuit current Pressure relief into the switchgear room through absbers Pressure relief out of the switchgear room through a pressure relief duct 12 kv 17.5 kv 25 ka 31.5 ka 40 ka 50 ka kv Width of control aisle E (min.) 17.5 kv Single-row arrangement (plan view) f single-busbar switchgear F dimensions B (width) and T (depth), see table on page 21 F back-to-back and face-to-face arrangement, the room dimensions apply accdingly to those f single-row arrangement. F back-to-back arrangement, a 1200 mm wide control aisle is required on the left on the right of the switchgear. 1) F connection from the front 150 mm, 100 mm f contact panel; f connection from the rear 500 mm 2) F designs with a closed pressure relief duct to the outside, a distance of 500 mm is required on one side 22 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

23 Technical data 17.5 kv Transpt and packing Transpt NXAIR 17.5 kv switchgear is delivered in fm of individual panels. Please observe the following: Transpt facilities on site Transpt dimensions and transpt weights Size of do openings in building. Packing Means of transpt: Rail and truck Panels on pallets Open packing with PE protective foil. Means of transpt: Seafreight Panels on pallets Sealed in PE protective foil, with closed wooden crate With desiccant bags With sealed wooden base Max. stage time: 6 months. Means of transpt: Airfreight Panels on pallets In wooden latticed crate with sealed upper and lower PE protective foil. These transpt and packing stipulations apply to the complete NXAIR product family. Me infmation to transpt dimensions/transpt weights is given in the cresponding table. NXAIR up to 40 ka Transpt dimensions, transpt weights 1) f individual panels Panel widths Transpt dimensions Width x Height x Depth Transpt weight with packing without packing mm mm mm mm approx. kg approx. kg Transpt by rail truck x 2510 x x 2510 x x 2510 x x 2510 x ) Transpt by seafreight airfreight ) NXAIR up to 50 ka Transpt dimensions, transpt weights 1) f individual panels Panel widths Transpt dimensions Width x Height x Depth Transpt weight with packing without packing mm mm mm mm approx. kg approx. kg Transpt by rail truck x 2650 x x 2650 x x 2650 x ) 1200 x 2650 x Transpt by seafreight airfreight ) ) Average values depending on the degree to which panels are equipped 2) A panels (with fced ventilation) and 3150 A panels Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

24 Technical data 24 kv Electrical data Rated values Rated voltage kv 24 frequency Hz 50 /60 sht-duration power-frequency withstand voltage (phase-to-phase, phase-to-earth) lightning impulse withstand voltage (phase-to-phase, phase-to-earth) kv 50 1) kv 125 sht-circuit breaking current max. ka 25 sht-time withstand current, 3 s max. ka 25 sht-circuit making current 2) max. ka 63 / 65 peak withstand current 2) max. ka 63 / 65 nmal current of busbar max. A 2500 nmal current of feeders: With circuit-breaker max. A 2500 With withdrawable disconnect link max. A 2500 Bus sectionalizer max. A 2500 R-HA eps Maximum values 24 kv; 25 ka; 2500 A R-HA eps Mot-operated panel 1) 65 kv optional f GOST standard 2) Values f 50 Hz: 63 ka, 60 Hz: 65 ka 24 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

25 Technical data 24 kv Product range, switchgear panels Circuit-breaker panel Disconnecting panel Current transfmer Voltage transfmer Make-proof earthing switch, optionally manual mot operating mechanism Earthing switch Capacitive voltage detecting system Cable sealing ends 1), max. 4 x 500 mm 2 per phase Bar feeder HA g eps Switch panel Withdrawable circuit-breaker, optionally manual mot operating mechanism Metering panel Withdrawable disconnect link, optionally manual mot operating mechanism HV HRC fuse 1) The details refer to conventional single-ce sealing ends, and depend on the rated nmal current and other built-in components. HA a eps and F other components in the busbar and connection compartments, see page 12. Withdrawable metering unit with withdrawable voltage transfmers Withdrawable HV HRC fuses Withdrawable voltage transfmers with primary fuses HA eps Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

26 Technical data 24 kv Product range, switchgear panels Bus sectionalizer (mirr-image installation also possible) Current transfmer Voltage transfmer Withdrawable panel Bus riser panel Make-proof earthing switch, optionally manual mot operating mechanism Capacitive voltage detecting system Withdrawable circuit-breaker, optionally manual mot operating mechanism Double busbar (back-to-back arrangement) Circuit-breaker panel (incoming sectionalizer) Bus coupler Withdrawable disconnect link, optionally manual mot operating mechanism Withdrawable voltage transfmers Withdrawable voltage transfmers with primary fuses Surge arrester/ limiter HA eps F other components in the busbar and connection compartments, see page 12. 1) Current transfmers only possible in combination with withdrawable disconnect link. 2) In case of withdrawable metering unit, voltage transfmers and earthing switches on the busbar are not possible. SS A = Busbar A SS B = Busbar B 26 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

27 Technical data 24 kv Dimensions 150 H1 H2 HA m eps H3 H4 H5 B T1 HA eps T2 Single busbar Double busbar (back-to-back arrangement) Width in mm Height in mm Depth in mm Panel type Rated nmal current B Circuit-breaker panel, disconnecting panel 800 A 1250 A 2000 A 2500 A Bus sectionalizer 1250 A 2500 A Sht-time withstand current 16 ka 20 ka 25 ka x x x x 1000 Metering panel Switch-disconnect panel with HV HRC fuses H1 Standard panel H2 With high low-voltage compartment x x 1000 H3 With natural ventilation H4 With optional arc absber 1) H5 With additional compartment f busbar components T1 Single busbar T2 Double busbar ) Number of absbers dependent on switchgear configuration Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

28 HA f eps Technical data 24 kv Room planning Pressure relief out of the switchgear room through a pressure relief duct Pressure relief into the switchgear room through absbers Lateral pressure relief duct Rear pressure relief duct Type of pressure relief Ceiling height D in mm f sht-circuit current 25 ka Pressure relief into the switchgear room through absbers 3300 Pressure relief out of the switchgear room ) through a pressure relief duct NXAIR 24 kv Arrangement (top view) f single-busbar switchgear B B ³150 1) T F dimensions B (width) and T (depth), see table on page ³150 2) ³150 2) 1350 Double-busbar arrangement (top view) F back-to-back arrangement, a 1200 mm wide control aisle is required on the left on the right of the switchgear to have the possibility (if required) to bring a circuit-breaker from one row to the other. 1) F connection from the front 150 mm f connection from the rear 500 mm 2) F designs with a closed pressure relief duct to the outside, a distance of 500 mm is required on one side 3) In case of a lower celing height, please contact your Siemens partner 28 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

29 Technical data 24 kv Transpt and packing Transpt NXAIR 24 kv switchgear is delivered in fm of individual panels. Please observe the following: Transpt facilities on site Transpt dimensions and transpt weights Size of do openings in building. Packing Means of transpt: Rail and truck Panels on pallets Open packing with PE protective foil. Means of transpt: Seafreight Panels on pallets Sealed in PE protective foil, with closed wooden crate With desiccant bags With sealed wooden base Max. stage time: 6 months. Means of transpt: Airfreight Panels on pallets In wooden latticed crate with sealed upper and lower PE protective foil. These transpt and packing stipulations apply to the complete NXAIR product family. Me infmation to transpt dimensions/transpt weights is given in the cresponding table. Transpt dimensions, transpt weights 1) f individual panels 2) Panel widths Transpt dimensions Width x Height x Depth Transpt weight with packing without packing mm mm mm mm approx. kg approx. kg Transpt by rail truck x ) x x ) x Transpt by seafreight airfreight 3) ) Average values depending on the degree to which panels are equipped 2) The double-busbar panels (back-to-back arrangement) are delivered as individual panels. Back-to-back connection is done on site 3) Pressure relief ducts busbar components such as earthing switches voltage transfmers as separate delivery f 10 panels each (W 1100 x H 2000 x D 1800) 4) A height of 2450 mm is possible if the pressure relief duct is transpted as a separate delivery Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

30 Standards Standards, specifications, guidelines Type of service location The switchgear can be used as indo installation accding to IEC (Power Installations exceeding AC 1 kv) and VDE 0101 Outside lockable electrical service locations at places which are not accessible to the public. Enclosures of switchgear can only be removed with tools In lockable electrical service locations. A lockable electrical service location is a place outdos indos that is reserved exclusively f housing electrical equipment and which is kept under lock and key. Access is restricted to authized personnel and persons who have been properly instructed in electrical engineering. Untrained unskilled persons may only enter under the supervision of authized personnel properly instructed persons. In accdance with the harmonization agreement reached by the countries of the European Union, their national specifications confm to the IEC standard. Table Dielectric strength Rated voltage (r.m.s. value) kv Rated sht-duration power-frequency withstand voltage (r.m.s. value) Between phases and to earth kv Across isolating distances kv Rated lightning impulse withstand voltage (peak value) Between phases and to earth kv Across isolating distances kv Altitude crection fact K a Dielectric strength The dielectric strength is verified by testing the switchgear with rated values of sht-duration power-frequency withstand voltage and lightning impulse withstand voltage accding to IEC /VDE (see table Dielectric strength ). The rated values are referred to sea level and to nmal atmospheric conditions (1013 hpa, 20 C, 11g/m3 water content accding to VDE 0111 and IEC 60071). The dielectric strength decreases with increasing altitude. F site altitudes above 1000 m (above sea level) the standards do not provide any guidelines f the insulation rating, but leave this to the scope of special agreements. Site altitude As the altitude increases, the dielectric strength of insulation in air decreases due to the decreasing air density. This reduction is permitted up to a site altitude of 1000 m accding to IEC and VDE. F site altitudes above 1000 m, a higher insulation level must be selected. It results from the multiplication of the rated insulation level f 0 to 1000 m with the altitude crection fact K a. Standards The switchgear complies with the relevant standards and specifications applicable at the time of type tests. F site altitudes above 1000 m, the altitude crection fact Ka is recommended, depending on the site altitude above sea level. Altitude crection fact Site altitude in m above sea level Rated sht-duration power-frequency withstand voltage to be selected f site altitudes > 1000 m Rated sht-duration power-frequency withstand voltage up to 1000 m Ka Rated lightning impulse withstand voltage to be selected f site altitudes > 1000 m Rated lightning impulse withstand voltage up to 1000 m Ka Example: 3000 m site altitude above sea level, 17.5 kv switchgear rated voltage, 95 kv rated lightning impulse withstand voltage Rated lightning impulse withstand voltage to be selected = 95 kv 1.28 = 122 kv Result: Accding to the above table, a switchgear f a rated voltage of 24 kv with a rated lightning impulse withstand voltage of 125 kv is to be selected. Overview of standards (May 2016) IEC standard VDE standard DIN EN standard Switchgear NXAIR IEC VDE DIN EN IEC VDE DIN EN Devices Circuit-breakers IEC VDE DIN EN Vacuum contacts IEC VDE DIN EN Disconnects and earthing switches IEC VDE DIN EN Switch-disconnects IEC VDE DIN EN Switch-disconnect/fuse combination IEC VDE DIN EN HV HRC fuses IEC VDE DIN EN Voltage detecting systems IEC VDE DIN EN Degree of protection IEC VDE DIN EN Insulation IEC VDE 0111 DIN EN Instrument IEC VDE DIN EN transfmers Current transfmers IEC VDE DIN EN Voltage transfmers IEC VDE DIN EN Installation, erection IEC VDE DIN EN HA b en eps 30 Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

31 Standards Standards, specifications, guidelines Current carrying capacity Accding to IEC /VDE and IEC / VDE , the rated nmal current refers to the following ambient air temperatures: Maximum of 24-hour mean: + 35 C Maximum: + 40 C The rated nmal current of the panels and busbars depends on the ambient air temperature outside the enclosure. Protection against solid feign objects, electric shock and water NXAIR fulfills accding to the standards IEC IEC VDE VDE the following degrees of protection: Switchgear panel NXAIR 17.5 kv NXAIR 24 kv Degree of protection f the enclosure optionally Degree of protection f the enclosure with ventilation Degree of protection f the partitions Degree of protection f the enclosure against mechanical impacts from outside IP3XD IP4X, IP50, IP51 IP3XD IP4X IP2X IK07 IP3XD IP4X IP50, IP51 IP3XD IP4X IP2X IK07 Climate and environmental influences NXAIR switchgear is suitable f application in indo installations under nmal operating conditions as defined in IEC , as follows: Maximum value of ambient air temperature: + 40 C, of 24-hour mean: + 35 C Minimum value of ambient air temperature: 5 C Site altitude 1000 m above sea level Relative air humidity over 24 h: 95 %, over a month: 90 % No significant pollution of the ambient air (dust, gases, vaps, salts). The switchgear may be used, subject to possible additional measures, under the following additional environmental influences: Natural feign materials Chemically active pollutants Small animals and the climate classes: 3K3 3K5. The climate classes are defined accding to IEC Seismic withstand capability NXAIR 17.5 kv and NXAIR 24 kv switchgear is tested in accdance with the following internationally accepted requirements: IEC/TS , IEC , IEC , IEEE 693, UBC Division IV. Internal arc classification Protection of operating personnel by means of tests f verifying the internal arc classification Internal arcing tests must be perfmed in accdance with IEC /VDE The switchgear complies with all criteria specified in the a.m. standards (page 30) f the basic version up to 50 ka. NXAIR complies with the internal arc classification: IAC A FLR up to 50 ka, 1 s. This provides maximum personal safety f switchgear accessible from all sides. Definition of criteria: Criterion 1 Crectly secured dos and covers do not open, limited defmations are accepted Criterion 2 No fragmentation of the enclosure, no projection of small parts above 60 g Criterion 3 No holes in accessible sides up to a height of 2 m Criterion 4 No ignition of indicats due to hot gases Criterion 5 The enclosure remains connected to its earthing point. Beyond the specifications of the above-mentioned standards, NXAIR switchgear up to 31.5 ka/1 s resp. 40 ka/0.1 s is optionally designed with confinement of internal arcs to the respective compartment. Terms Make-proof earthing switches are earthing switches with sht-circuit making capacity accding to IEC and VDE /EN Air-Insulated Medium-Voltage Switchgear NXAIR, up to 24 kv Siemens HA

32 Published by Siemens AG 2016 Siemens AG Energy Management Medium Voltage & Systems Mozartstraße 31 C Erlangen Germany Siemens AG Energy Management Medium Voltage & Systems 160 Herring Road 2113 Macquarie Park NSW Australia Siemens AG Energy Management Medium Voltage & Systems Thane Belapur Road Thane India Siemens AG Energy Management Medium Voltage & Systems Jalan Pulo MAS Utara Kav. B Jakarta, Indonesia Siemens AG Energy Management Medium Voltage & Systems 46 Newmarket Road Randburg 2169 South Africa F further infmation please contact our Customer Suppt Center Phone: Fax: suppt.energy@siemens.com Article No. EMMS-K1425-A811-B Printed in Germany Dispo PU 1/79905 KG Subject to changes and errs. The infmation given in this document only contains general descriptions perfmance features which may not always specifically reflect those described, which may undergo modification in the course of further development of the products. The requested perfmance features are binding only when they are expressly agreed upon in the concluded contract. NXAIR and SION are registered trademarks of Siemens AG. Any unauthized use is prohibited. All other designations in this document may represent trademarks whose use by third parties f their own purposes may violate the proprietary rights of the owner. 2016