MINI MCR-SL-UI-UI-NC. Extract from the online catalog. Order No.:

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "MINI MCR-SL-UI-UI-NC. Extract from the online catalog. Order No.:"

Transcription

1 Extract from the online catalog MINI MCR-SL-UI-UI-NC Order No.: MCR 3-way isolating amplifier for electrical isolation of analog signals, input/output configurable via DIP switch, with screw connection, not pre-configured Commercial data EAN Pack 1 Pcs. Customs tariff Weight/Piece KG Product key Catalog page information Page 288 (IF-2007) Product notes WEEE/RoHS-compliant since: 11/17/ Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Input data Configurable/programmable Yes, unconfigured PHOENIX CONTACT GmbH & Co. KG Page 1 / 6

2 Voltage input signal Current input signal Max. input voltage Max. input current Input resistance of voltage input Input resistance current input 0 V V (please indicate any different setting when ordering) 0 V... 5 V 1 V... 5 V 2 V V 0 ma ma 4 ma ma 30 V 50 ma Approx. 100 kω Approx. 50 Ω Output data Configurable/programmable Voltage output signal Current output signal Max. output voltage Max. output current Load/output load voltage output Load/output load current output Yes, unconfigured 0 V V (please indicate any different setting when ordering) 0 V... 5 V 1 V... 5 V 2 V V 0 ma ma (please indicate any different setting when ordering) 4 ma ma Approx V 28 ma 10 kω < 500 Ω (at 20 ma) Power supply Nominal supply voltage Range of supply voltages Max. current consumption Power consumption 24 V DC 19.2 V DC V DC (to bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No ) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715) < 19 ma (Current output, at 24 V DC incl. load) < 9 ma (Voltage output, at 24 V DC incl. load) < 450 mw (Current output) < 200 mw (Voltage output) Connection data Type of connection Screw connection PHOENIX CONTACT GmbH & Co. KG Page 2 / 6

3 Conductor cross section solid min mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 12 Stripping length 12 mm Screw thread M3 General data No. of channels 1 Length Width Height Transmission error, max. Maximum temperature coefficient Temperature coefficient, typical Limit frequency (3 db) Step response (10-90%) Protective circuitry mm 6.2 mm 93.1 mm 0.1 % (of end value) < 0.01 %/K < %/K Approx. 100 Hz Approx. 3.2 ms Transient protection Ambient temperature (operation) -20 C C Ambient temperature (storage/transport) -40 C C Degree of protection IP20 Emitted interference EN Immunity to interference EN Color Housing material Mounting position Assembly instructions Conformity ATEX approval UL, USA / Canada GL green PBT Any The DIN rail bus connector (T-BUS) can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN DIN rail. CE compliant Ex II 3 G Ex na II T4 X UL 508 Recognized GL EMC 2 D PHOENIX CONTACT GmbH & Co. KG Page 3 / 6

4 Certificates / Approvals Certification CUL, GL, UL Certification Ex: CUL-EX LIS, PxC-EX, UL-EX LIS Accessories Item Designation Description General ME 6,2 TBUS-2 1,5/5-ST-3,81 GN Plug component, Color: green MINI MCR-SL-PTB MCR power terminal block for supplying several MINI Analog modules via the DIN rail connectors, with screw connection, current consumption up to max. 2 A MINI MCR-SL-PTB-SP MCR power terminal block for supplying several MINI-ANALOG modules via the DIN rail connectors, with spring-cage connection, current consumption up to max. 2 A MINI-PS AC/24DC/1.5/ EX MINI-SYS- PS AC/24DC/1.5 Power supply unit, primary switched, slim design, output: 24 V DC / 1.5 A, ATEX approval Power supply unit, primary switched, slim design, output: 24 V DC / 1.5 A Drawings Application drawing PHOENIX CONTACT GmbH & Co. KG Page 4 / 6

5 Dimensioned drawing Circuit diagram PHOENIX CONTACT GmbH & Co. KG Page 5 / 6

6 Address PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr Blomberg,Germany Phone Fax Phoenix Contact Technical modifications reserved; PHOENIX CONTACT GmbH & Co. KG Page 6 / 6

QUINT-PS AC/24DC/40

QUINT-PS AC/24DC/40 Extract from the online catalog QUINT-PS-100-240AC/24DC/40 Order No.: 2938879 DIN rail power supply unit 24 V DC/40 A, primary switched-mode, 1- phase. Commercial data EAN 4017918987091 Pack 1 pcs. Customs

More information

MINI MCR-SL-R-UI(-SP)

MINI MCR-SL-R-UI(-SP) Resistance/potiposition transducer INTERFACE Data Sheet 0807_en_05 Description PHOENIX CONTACT - 0/008 Features The slim MINI MCR-SL-R-UI... potiposition transducer has a width of only 6. mm and converts

More information

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050 Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage

More information

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff

More information

VIP-2/SC/FLK20. Extract from the online catalog. Order No.:

VIP-2/SC/FLK20. Extract from the online catalog. Order No.: Extract from the online catalog VIP-2/SC/FLK20 Order No.: 2315049 The illustration shows a 16-position version VARIOFACE module, with screw connection and flat-ribbon cable plug connector, for mounting

More information

SP 2,5/12. Extract from the online catalog. Order No.:

SP 2,5/12. Extract from the online catalog. Order No.: Extract from the online catalog SP 2,5/12 Order No.: 3040368 The illustration shows a 6-position version Connectors, Type of connection: Spring-cage connection, Number of positions: 12, Cross section:

More information

PT 2-PE/S-120AC/FM. Extract from the online catalog. Order No.:

PT 2-PE/S-120AC/FM. Extract from the online catalog. Order No.: Extract from the online catalog PT 2-PE/S-120AC/FM Order No.: 2856812 The figure shows the PT 2-PE/S-230AC/FM version DIN rail module with pluggable surge protection type 3 for terminal equipment, fault

More information

GMKDS 3/ 3-7,62. Extract from the online catalog. Order No.: 1731734

GMKDS 3/ 3-7,62. Extract from the online catalog. Order No.: 1731734 Extract from the online catalog GMKDS 3/ 3-7,62 Order No.: 1731734 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 500 V, Pitch: 7.62 mm, Number of positions:

More information

PC 4/ 2-ST-7,62. Extract from the online catalog. Order No.: 1804904

PC 4/ 2-ST-7,62. Extract from the online catalog. Order No.: 1804904 Extract from the online catalog PC 4/ 2-ST-7,62 Order No.: 1804904 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of

More information

PC 4/ 5-STF-7,62. Extract from the online catalog. Order No.: 1828278

PC 4/ 5-STF-7,62. Extract from the online catalog. Order No.: 1828278 Extract from the online catalog PC 4/ 5-STF-7,62 Order No.: 1828278 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of

More information

PSI-MOS-RS485W2/FO 850 T

PSI-MOS-RS485W2/FO 850 T Extract from the online catalog PSI-MOS-RS485W2/FO 850 T Order No.: 2708326 FO converter with integrated optical diagnosis, alarm contact, for RS-485 2-wire bus systems (SUCONET K, MODBUS...) up to 500

More information

MKDSN 1,5/ 3-5,08. Extract from the online catalog. Order No.: 1729131

MKDSN 1,5/ 3-5,08. Extract from the online catalog. Order No.: 1729131 Extract from the online catalog MKDSN 1,5/ 3-5,08 Order No.: 1729131 The figure shows a 10-position version of the product PC terminal block, Nominal current: 13.5 A, Nom. voltage: 250 V, Pitch: 5.08 mm,

More information

PC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807

PC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807 Extract from the online catalog PC 4/ 3-G-7,62 Order No.: 1804807 The figure shows a 5-pos. version of the product Header, Nominal current:, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 3,

More information

PC 4/ 4-ST-7,62. Extract from the online catalog. Order No.: 1804920

PC 4/ 4-ST-7,62. Extract from the online catalog. Order No.: 1804920 Extract from the online catalog PC 4/ 4-ST-7,62 Order No.: 1804920 The figure shows a 5-pos. version of the product Plug component, nominal current:, rated voltage: 400 V, pitch: 7.62 mm, no. of positions:

More information

MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description

MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description Voltage Transducer for DC Voltages TERFACE Data Sheet 000_en_0 PHOENIX CONTACT - /00 Description The MCR voltage transducer measures DC voltages in several signal ranges from 0... ±0 V DC to 0... ±0 V

More information

UT 2,5. Extract from the online catalog. Order No.:

UT 2,5. Extract from the online catalog. Order No.: Extract from the online catalog UT 2,5 Order No.: 3044076 Universal terminal block, Type of connection: Screw connection, Screw connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: gray,

More information

MCR-C-...-DC. MCR 3-Way Isolation Amplifier INTERFACE. Data Sheet. Description. Method of Operation

MCR-C-...-DC. MCR 3-Way Isolation Amplifier INTERFACE. Data Sheet. Description. Method of Operation MCR 3-Way Isolation Amplifier INTERFACE Data Sheet Description PHOENIX CONTACT - 12/2005 Method of Operation MCR 3-way isolation amplifiers are used to electrically isolate and convert analog signals.

More information

UT 4-MTD. Extract from the online catalog. Order No.:

UT 4-MTD. Extract from the online catalog. Order No.: Extract from the online catalog UT 4-MTD Order No.: 3046184 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: - 6 mm², AWG 26-10, Width: 6.2 mm, Color: gray, Mounting

More information

UT 4-MT. Extract from the online catalog. Order No.:

UT 4-MT. Extract from the online catalog. Order No.: Extract from the online catalog UT 4-MT Order No.: 3046139 Universal terminal block with screw connection, cross section: 0,14-4 mm², AWG: 26-10, width: 6.2 mm, color: Gray Commercial data EAN 4017918975562

More information

MCD 1,5/ 4-G1-3,81. Extract from the online catalog. Order No.: 1843091

MCD 1,5/ 4-G1-3,81. Extract from the online catalog. Order No.: 1843091 Extract from the online catalog MCD 1,5/ 4-G1-3,81 Order No.: 1843091 The figure shows a 10-position version of the product Header, Nominal current:, Nom. voltage: 160 V, Pitch: 3.81 mm, Number of positions:

More information

Supply unit for transmitters

Supply unit for transmitters JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net

More information

Extract from the online catalog

Extract from the online catalog Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The

More information

PT 2,5-QUATTRO-TG. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO-TG. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO-TG Order No.: 3210208 Disconnect terminal block, Connection type: Push-in connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:

More information

PIT 2,5-QUATTRO. Extract from the online catalog. Order No.:

PIT 2,5-QUATTRO. Extract from the online catalog. Order No.: Extract from the online catalog PIT 2,5-QUATTRO Order No.: 3209578 Feed-through modular terminal block, Connection method: Pushin connection, Push-in connection, Cross section: - 4 mm², AWG 26-12, Width:

More information

PHOENIX CONTACT - 2012-12-14. Features

PHOENIX CONTACT - 2012-12-14. Features Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed

More information

Extract from the online catalog

Extract from the online catalog Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The

More information

Voltage Measuring Transducer for AC Voltage MCR-VAC-UI-0-DC

Voltage Measuring Transducer for AC Voltage MCR-VAC-UI-0-DC , Voltage Measuring Transducer for AC Voltage MCR-VAC-UI-0-DC. Description -way electrical isolation TRMS measurement Adjustable voltage ranges / adjustment ±0% Voltage transducers measure AC voltages

More information

Isolating power supplies and output isolators

Isolating power supplies and output isolators Isolating power supplies with HART Overview Analog input isolating power supply, function block diagram Analog input 0/4... 20 ma The isolating power supplies are used for the intrinsically safe operation

More information

MINI-PS AC/24DC/1.3

MINI-PS AC/24DC/1.3 Power supply unit INTERFACE Data sheet 102894_en_02 1 Description PHOENIX CONTACT 2010-12-27 Features MINI POWER is the extremely slim power supply unit with constructional widths of 22.5 mm, 45 mm and

More information

Safety technique. Emergency stop module BO 5988 safemaster

Safety technique. Emergency stop module BO 5988 safemaster Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1

More information

Feed-through terminal block - SSK 110 KER-EX - 0502058

Feed-through terminal block - SSK 110 KER-EX - 0502058 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid

More information

FL SWITCH SF... Factory Line Switches With Standard Functions. Data Sheet

FL SWITCH SF... Factory Line Switches With Standard Functions. Data Sheet Factory Line Switches With Standard Functions Data Sheet 05/2004 This data sheet is valid for the following products: FL SWITCH SF 8TX FL SWITCH SF 7TX/FX FL SWITCH SF 6TX/2FX FL SWITCH SF 16TX FL SWITCH

More information

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000. NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24

More information

Assembly. Front view. Switch S1. Power Rail

Assembly. Front view. Switch S1. Power Rail Temperature Repeater Features Assembly 1-channel isolated barrier V DC supply (Power Rail) Resistance and RTD input (Pt100, Pt500, Pt1000) Resistance output Accuracy 0.1 % Line fault detection (LFD) for

More information

Redundancy Module QUINT-DIODE/40

Redundancy Module QUINT-DIODE/40 Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping

More information

MODBUS fieldbus coupler; RS-485, ,200 baud; digital and analog signals

MODBUS fieldbus coupler; RS-485, ,200 baud; digital and analog signals Printview: MODBUS fieldbus coupler; RS-48, 0 9,200 baud; digital and analog signals - Item No: 70-32 MODBUS fieldbus coupler; RS-48, 0 9,200 baud; digital and analog signals Item No: 70-32 MODBUS fieldbus

More information

Multi-Channel Passive Isolator MCR-...CLP-I/I-00

Multi-Channel Passive Isolator MCR-...CLP-I/I-00 Multi-Channel Passive solator MCR-...CLP-/-00 Electrical isolation without additional power supply Current signals 0(4)...20 ma 1-, 2- and 4-channel versions 1. Description MCR-1,2,4CLP-/-00 passive isolators

More information

MCV 1,5/ 2-G-3,81. Extract from the online catalog. Order No.: 1803426

MCV 1,5/ 2-G-3,81. Extract from the online catalog. Order No.: 1803426 Extract from the online catalog MCV 1,5/ 2-G-3,81 Order No.: 1803426 The figure shows a 10-position version of the product Header, Nominal current:, Nom. voltage: 160 V, Pitch: 3.81 mm, Number of positions:

More information

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1 Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input

More information

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001 Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.

More information

ETD-SL-1T-DTF. Multifunctional Timer Relay With One Settable Time INTERFACE. Data Sheet. Description

ETD-SL-1T-DTF. Multifunctional Timer Relay With One Settable Time INTERFACE. Data Sheet. Description Multifunctional Timer Relay With One Settable Time INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description Multifunctional timer relay with non floating control input and one settable time. The flashing

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

NSG 001/B IP Interface for Analog Systems

NSG 001/B IP Interface for Analog Systems NSG 001/B IP Interface for Analog Systems Features and Functions Interface to analog systems, with galvanic isolation 3 potential-free inputs and outputs Expandable to up to 27 potential-free inputs and

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

CompactLogix Power Supplies Specifications

CompactLogix Power Supplies Specifications Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

RM17UAS. Main. Product or component type. Product specific application. Relay monitored parameters

RM17UAS. Main. Product or component type. Product specific application. Relay monitored parameters Characteristics voltage control relay RM17-U - range 65..260 V AC Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main Range of

More information

Inductive sensor NI10-M18-Y1X-H1141

Inductive sensor NI10-M18-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12

More information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications. Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description

More information

SINEAX SI 815 Passive DC Signal Isolator

SINEAX SI 815 Passive DC Signal Isolator with power supply transfer and without separate power supply connection, versions available for FSK 1 and Ex and non-ex, in housing N17 or S17 for rail and wall mounting 0102 II (1) G Application The signal

More information

Actuator-Sensor-Interface

Actuator-Sensor-Interface Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current

More information

PHOENIX CONTACT - 01/2007

PHOENIX CONTACT - 01/2007 Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply

More information

PLC-RS /21. PLC INTERFACE With PDT Relay, Universal Version. INTERFACE Data Sheet 101780_en_02. 1 Description

PLC-RS /21. PLC INTERFACE With PDT Relay, Universal Version. INTERFACE Data Sheet 101780_en_02. 1 Description PLC INERFCE With PD Relay, niversal Version INERFCE Data Sheet 780_en_02 PHOENIX CONC - 03/08 Description PLC-RS /2 relay modules, which can be used universally, comprise 6.2 mm basic terminal blocks and

More information

SD326RU68S2 motion control stepper motor drive - SD326 - pulse/direction - <= 6.8 A

SD326RU68S2 motion control stepper motor drive - SD326 - pulse/direction - <= 6.8 A Characteristics motion control stepper motor drive - SD326 - pulse/direction -

More information

J TB/TW Temperature limiter, temperature monitor

J TB/TW Temperature limiter, temperature monitor JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net

More information

3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,

3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V, Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41

More information

TRANSDUCER of TEMPERATURE and STANDARD SIGNALS P20 type

TRANSDUCER of TEMPERATURE and STANDARD SIGNALS P20 type TRANSDUCER of TEMPERATURE and STANDARD SIGNALS P20 type USER S MANUAL 1 2 Contents 1. APPLICATION...5 2. TRANSDUCER SET... 5 3. OPERATIONAL SAFETY...6 4. INSTALLATION...7 4.1. Fitting way...7 4.2. External

More information

electric amplifier for proportional valves operating voltage 8-35 V DC maximum current 2,6 A multi-course potentiometers for adjusting I min

electric amplifier for proportional valves operating voltage 8-35 V DC maximum current 2,6 A multi-course potentiometers for adjusting I min SC/ESC/DSC2000 electric amplifier for proportional valves operating voltage 835 maximum current 2,6 A 060110_SC2000_e 01.2016 Table of contents Contents Page Characteristics 1 Technical data 2 Dimensions

More information

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011 Technical Data 2CDC505051D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are

More information

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component. Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on

More information

Miniature pressure transmitter Model M-10, standard version Model M-11, version with flush diaphragm

Miniature pressure transmitter Model M-10, standard version Model M-11, version with flush diaphragm Electronic pressure measurement Miniature pressure transmitter Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further Approvals see page 3 MicroTronic

More information

Three-phase monitoring relay CM-PFE

Three-phase monitoring relay CM-PFE Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics

More information

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main

More information

DIOLINE local-bus expansion module with 2 analogue inputs and 2 analogue outputs, settable

DIOLINE local-bus expansion module with 2 analogue inputs and 2 analogue outputs, settable Subject to technical modification 746407 Identification Type DL-LB-AIO-2/2-U/I/PT Product version Hardware revision C Software version 2.00 Datasheet version 00 Use/Application/Properties Description DIOLINE

More information

Analog signal converters CC-E I/I Current / current isolators

Analog signal converters CC-E I/I Current / current isolators ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between

More information

is then retained absolutely without interruption.

is then retained absolutely without interruption. Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection

More information

s 8 186 TXB1.PROFINET PROFINET BIM TX-I/O

s 8 186 TXB1.PROFINET PROFINET BIM TX-I/O s 8 186 TX-I/O PROFINET BIM TXB1.PROFINET Interface between the automation station and the bus of the TX-I/O modules Compact format (to DIN43 880), small footprint Simple installation and easy access Self-establishing

More information

TX OPEN RS232/485 module

TX OPEN RS232/485 module s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the

More information

Modular I/O System Analog and Digital Interface Modules

Modular I/O System Analog and Digital Interface Modules OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part

More information

Differential Charge Amplifier

Differential Charge Amplifier Electronics Differential Type 58A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure (IP64) Plastic

More information

Electronic timer CT-TGD.12

Electronic timer CT-TGD.12 2CDC 251 098 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection

More information

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0. 48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according

More information

Quick Connect. quick - simple - efficient. www.g-mw.de

Quick Connect. quick - simple - efficient. www.g-mw.de Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power

More information

Relays SAFETY RELAYS SERIES. High Integrity Safety Relays. Suitable for SIL 3 applications according to IEC and IEC D5000 / D1000 SERIES

Relays SAFETY RELAYS SERIES. High Integrity Safety Relays. Suitable for SIL 3 applications according to IEC and IEC D5000 / D1000 SERIES D5000 / D00 SERIES SAFETY RELAYS SERIES High Integrity Safety Relays Suitable for applications according to IEC 608 and IEC 611 Relays technology for safety DTS0262-1 27 SAFETY RELAY - FEATURES SAFETY

More information

Technical data. Housing PA 6.6 polyamide housing, self-extinguishing, V0 acc. to UL 94

Technical data. Housing PA 6.6 polyamide housing, self-extinguishing, V0 acc. to UL 94 CS ME01 Technical data Housing PA 6.6 polyamide housing, selfextinguishing, V0 acc. to UL 94 Protection degree IP40 (housing), IP20 (terminal strip) Dimensions see page 283, design A s with output contacts

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

41 Series - Low profile PCB relays A. Features Plug-in / PCB Relays

41 Series - Low profile PCB relays A. Features Plug-in / PCB Relays Series - Low profile PCB relays 8-12 - 16 A 41 Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16

More information

Magnetic field sensor magnet-inductive proximity sensor BIM-M12E-Y1X-H1141

Magnetic field sensor magnet-inductive proximity sensor BIM-M12E-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.

More information

Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate

Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate 1 919 1919P01 1919P03 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate QBM751-1/C QBM65/C QBM75/C Highly accurate measurements with calibration

More information

PHOENIX CONTACT

PHOENIX CONTACT Thermomagnetic circuit breakers CLIPLINE Data sheet 103943_en_04 PHOENIX CONTACT 2010-08-18 1 Description The UT 6-TMC M circuit breaker is a single-position overload circuit breaker with thermomagnetic

More information

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51 34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in

More information

RM4TG20 three-phase network control relay RM4-T - range 200..500 V

RM4TG20 three-phase network control relay RM4-T - range 200..500 V Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking

More information

DeltaV Bulk Power Supplies

DeltaV Bulk Power Supplies DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A,10 A, 20 A and 40 A Bulk Power Supplies DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy

More information

Magnetic field sensor magnet-inductive proximity sensor BIM-EG08-Y1X

Magnetic field sensor magnet-inductive proximity sensor BIM-EG08-Y1X ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4301 Rated operating distance 78 mm with DMR31-15-5 magnet DC 2-wire, nom.

More information

Safety Interlock Switches

Safety Interlock Switches r Safety Interlock Switches Compact Coded Magnetic Safety Interlock Switch and Control Unit Dual channel, fully monitored system; meets Category 3 when single switch and control unit are used; 6 meets

More information

Measuring and monitoring relays CM-MSS (4), CM-MSS (5) Thermistor motor protection relays

Measuring and monitoring relays CM-MSS (4), CM-MSS (5) Thermistor motor protection relays Data sheet Measuring and monitoring relays CM-MSS (4), Thermistor motor protection relays The devices CM-MSS (4) and (5) are used to monitor the overload of motors by the wiring temperature. The motors

More information

SIRAX SI 815 Passive DC Signal Isolator

SIRAX SI 815 Passive DC Signal Isolator with power supply transfer and without separate power supply connection, versions available for FSK, Ex and non-ex versions 002 II () G Application The signal isolator SIRAX SI 85 (Fig. ) serves to electrically

More information

Switch Actuator, 8-fold, 10 A, MDRC AT/S 8.10.1, GH Q631 0075 R0111

Switch Actuator, 8-fold, 10 A, MDRC AT/S 8.10.1, GH Q631 0075 R0111 , GH Q631 0075 R0111 The 8-fold switch actuator is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via a bus terminal. In the event of bus voltage failure,

More information

PHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.

PHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area. Primary-switched power supply with SFB technology, 1 AC, output current 10 A INTERFACE Data Sheet 103128_en_01 PHOENIX CONTACT - 05/2008 1 Description QUINT POWER power supply units highest system availability

More information

LONWORKS Fibre Optic Converter

LONWORKS Fibre Optic Converter LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring

More information

Power Supplies 3. SDN-P DIN Rail Series

Power Supplies 3. SDN-P DIN Rail Series SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.

More information

Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141

Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6

More information

Technical Data Sheet Positioner Type 824 TD_824. General data

Technical Data Sheet Positioner Type 824 TD_824. General data General data Mounting Enclosure material On linear actuators On quarter-turn actuators ARCA-integrated or acc. to IEC 534-6 (NAMUR) Range of stroke 10... 120 mm ARCA-integrated or acc. to VDI/VDE 3845

More information

PR1 Relay Base for: Relays With SPDT or DPDT Contacts Solid-State Relays With the Same Structure

PR1 Relay Base for: Relays With SPDT or DPDT Contacts Solid-State Relays With the Same Structure PR Relay Base for: Relays With SPDT or DPDT Contacts Solid-State Relays With the Same Structure Universal Modular System The 5 mm (0.59 in.) wide PR relay base range is a modular system consisting of PR-B...

More information

Isolating Barriers for our sensors A5S1 in Ex-areas Series D461

Isolating Barriers for our sensors A5S1 in Ex-areas Series D461 D46 Isolating Barriers for our sensors A5S1 in Ex-areas Series KEY FEATURES ATEX / IECEx certified, also approval for UL / CSA and EAC (Russia, Kazakhstan and Belarus Customs Union) Protection grade Ex

More information

48 SERIES Relay interface modules 10 A

48 SERIES Relay interface modules 10 A 48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply

More information

Electronic timer CT-APS.22 OFF-delayed with 2 c/o (SPDT) contacts

Electronic timer CT-APS.22 OFF-delayed with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-APS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S

More information

Type: EASY512 AC R Article No.: Ordering information Relay outputs Quantity 4 Power supply V DC 115/230 V AC. Description

Type: EASY512 AC R Article No.: Ordering information Relay outputs Quantity 4 Power supply V DC 115/230 V AC. Description Type: EASY512 AC R Article No.: 274103 Ordering information Relay outputs Quantity 4 Power supply V DC 115/230 V AC Description 8 digital inputs 4 relay outputs LCD display Operating buttons Screw terminals

More information