MF-MSMF Series - PTC Resettable Fuses
|
|
|
- Darlene Blair
- 7 years ago
- Views:
Transcription
1 *RoHS OMPLINT & E PPROVED Features ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with Pb and Pb-free solder reflow profiles RoHS compliant* and halogen free** Surface mount packaging for automated assembly gency recognition: Standard 453 mm (8 mils) footprint Patents pending MF-MSMF Series - PT Resettable Fuses Electrical haracteristics Model V max. Volts I max. mps I hold I trip Resistance Max. Time To Trip Tripped Power Dissipation Watts mperes Ohms mperes Seconds Hold Trip R Min. R Max. Typ. MF-MSMF MF-MSMF MF-MSMF MF-MSMF00/ MF-MSMF MF-MSMF MF-MSMF MF-MSMF075/ MF-MSMF MF-MSMF0/ MF-MSMF0/4X MF-MSMF MF-MSMF MF-MSMF50/4X MF-MSMF MF-MSMF MF-MSMF50/6X MF-MSMF Environmental haracteristics Operating Temperature to +85 Maximum Device Surface Temperature in Tripped State... 5 Passive ging , 000 hours... ±5 % typical resistance change Humidity ging , 85 % R.H. 000 hours... ±5 % typical resistance change Thermal Shock to -40, 0 times... ±0 % typical resistance change Solvent Resistance... MIL-STD-0, Method 5... No change Vibration... MIL-STD-883, Method 007.,... No change ondition Test Procedures nd Requirements For Model MF-MSMF Series Test Test onditions ccept/reject riteria Visual/Mech.... Verify dimensions and materials... Per MF physical description Resistance... In still 3... Rmin R Rmax Time to Trip... t specifi ed current, Vmax, 3... T max. time to trip (seconds) Hold urrent min. at Ihold... No trip Trip ycle Life... Vmax, Imax, 00 cycles... No arcing or burning Trip Endurance... Vmax, 48 hours... No arcing or burning Solderability... NSI/J-STD % min. coverage UL File Number... E Follow link to ertifi cations, then UL File No., enter E74545 S File Number Under ertifi cation Record and File Number enter TÜV ertifi cate Number... R Follow link to other certifi cates, enter File No *RoHS Directive 00/95/E Jan 7, 003 including nnex. **Bourns is using the definition that appears to be the prevalent definition used as the industry standard at this time. The Bourns definition of halogen-free is: Bromine (Br) content: 900 ppm; hlorine (l) content: 900 ppm; Total Br + l content: 500 ppm.
2 pplications Overcurrent and overtemperature protection of automotive electronics Hard disk drives P motherboards P peripherals Point-of-sale (POS) equipment PMI cards USB port protection - USB.0, 3.0 & OTG HDMI.4 Source protection MF-MSMF Series - PT Resettable Fuses Product Dimensions (see next page for outline drawings) Model MF-MSMF00 MF-MSMF04 MF-MSMF00 MF-MSMF00/60 MF-MSMF030 MF-MSMF050 MF-MSMF075 MF-MSMF075/4 MF-MSMF0 MF-MSMF0/6 MF-MSMF0/4X MF-MSMF5 MF-MSMF50 MF-MSMF50/4X MF-MSMF60 MF-MSMF00 MF-MSMF50/6X MF-MSMF60 B D Min. Max. Min. Max. Min. Max. Min (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.09) (0.033) (0.0) Style Packaging: MF-MSMF00 through MF-MSMF030 = 500 pcs. per reel. MF-MSMF050 through MF-MSMF00 & MF-MSMF60 = 000 pcs. per reel. MF-MSMF0/4X, MF-MSMF50/4X & MF-MSMF50/6X = 500 pcs. per reel. DIMENSIONS: MM (INHES) Specifi cations are subject to change without notice.
3 MF-MSMF Series - PT Resettable Fuses Product Dimensions (see previous page for dimensions) Style Top and Bottom View B Side View Recommended Pad Layout.5 ± 0.05 (.059 ±.00).5 ± 0.05 (.059 ±.00) 3. ± 0. (0.6 ±.004) Terminal material: Electroless Ni under immersion u Termination pad solderability: Standard u fi nish: Meets NSI/J-STD-00 ategory. D.7 ± 0. (.06 ±.004) Recommended Storage: 40 max./70 % RH max. Style Top View Bottom View Side View Recommended Pad Layout 8 B.95 ± 0.0 (.4 ±.004) D.68 ± 0.05 (.066 ±.00) 3. ± 0.0 (. ±.004) Typical Time to Trip at 3 00 MF-MSMF00 0 MF-MSMF030 MF-MSMF00 The Time to Trip curves represent typical performance of a device in a simulated application environment. ctual performance in specifi c customer applications may differ from these values due to the infl uence of other variables. Time to Trip (Seconds) MF-MSMF60 MF-MSMF60 MF-MSMF50 MF-MSMF5 MF-MSMF0 MF-MSMF04 MF-MSMF075 MF-MSMF00 MF-MSMF0/6 MF-MSMF075/ MF-MSMF Fault urrent (mps)
4 MF-MSMF Series - PT Resettable Fuses Thermal Derating hart - Ihold (mps) mbient Operating Temperature Model MF-MSMF MF-MSMF MF-MSMF MF-MSMF00/ MF-MSMF MF-MSMF MF-MSMF MF-MSMF075/ MF-MSMF MF-MSMF0/ MF-MSMF0/4X MF-MSMF MF-MSMF MF-MSMF50/4X MF-MSMF MF-MSMF MF-MSMF50/6X MF-MSMF Solder Reflow Recommendations Temperature ( ) Preheating Soldering ooling Notes: MF-MSMF models cannot be wave soldered. Please contact Bourns for hand soldering recommendations. If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. ompatible with Pb and Pb-free solder reflow profiles. Excess solder may cause a short circuit, especially during hand soldering. Please refer to the Multifuse Polymer PT product soldering recommendation guidelines Time (seconds) 0 How to Order MF - MSMF 075/4 - Multifuse Product Designator Series MSMF = 453 mm (8 mils) Surface Mount omponent Hold urrent, Ihold (0.0 mps -.60 mps) Higher Voltage Option = Standard Voltage /6 = 6 Volt Rated /4 = 4 Volt Rated /60 = 60 Volt Rated X = Multifuse freexpansion Design MF-MSMF Series Packaging Packaged per EI = Tape and Reel Typical Part Marking Represents total content. Layout may vary. 5Y BI-WEEKLY DTE ODE: WEEKS = Y YER ODE: 5 = 005 PRT IDENTIFITION EXMPLES: MF-MSMF050 = 50 MF-MSMF075 = 75 MF-MSMF0 = MF-MSMF50 = 5 PRT IDENTIFITION EXMPLES: MF-MSMF0/4X = 6 MF-MSMF50/4X = 8 MF-MSMF50/6X = BI-WEEKLY DTE ODE: WEEKS 5-6 = MF-MSMF SERIES, REV. E, 0/4 freexpansion Design is a trademark of Bourns, Inc. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. 8
5 MF-MSMF Series Tape and Reel Specifications MF-MSMF-0/4X MF-MSMF00 - MF-MSMF050 - MF-MSMF50/4X MF-MSMF030 MF-MSMF60 MF-MSMF50/6X Tape Dimensions per EI-48- per EI 48- per EI 48- W.0 ± ± ± 0.30 (0.47 ± 0.0) (0.47 ± 0.0) (0.47 ± 0.0) 4.0 ± ± ± 0.0 P 0 (0.57 ± 0.004) (0.57 ± 0.004) (0.57 ± 0.004) 8.0 ± ± ± 0.0 P (0.35 ± 0.004) (0.35 ± 0.004) (0.35 ± 0.004).0 ± ± ± 0.05 P (0.079 ± 0.00) (0.079 ± 0.00) (0.079 ± 0.00) 3.58 ± ± ± (0.4 ± 0.004) (0.44 ± 0.006) (0.46 ± 0.004) 4.93 ± ± ± 0.0 B 0 (0.94 ± 0.004) (0.96 ± 0.004) (0.00 ± 0.004) B max (0.3) (0.3) (0.3) / / /-0.0 D 0 ( /-0) ( /-0) ( /-0) F 5.5 ± ± ± 0.05 (0.7 ± 0.00) (0.7 ± 0.00) (0.7 ± 0.00).75 ± ± ± 0.0 E (0.069 ± 0.004) (0.069 ± 0.004) (0.069 ± 0.004) E min (0.404) (0.404) (0.404) T max (0.04) (0.04) (0.04) T max (0.004) (0.004) (0.004).30 ± ± ± 0.0 K 0 (0.05 ± 0.004) (0.037 ± 0.004) (0.059 ± 0.004) Leader min (5.35) (5.35) (5.35) Trailer min (6.30) (6.30) (6.30) Reel Dimensions max (7.8) (7.8) (7.8) N min (.97) (.97) (.97).4 +.0/ / /-0.0 W ( /-0.0) ( /-0.0) ( /-0.0) W max (0.74) (0.74) (0.74) T OVER TPE D 0 P P 0 E DIMENSIONS: MM (INHES) W (MESURED T HUB) B F E W N(HUB DI.) B0 K0 T 0 P W (MESURED T HUB)
Komatsulite NR Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Ratings 6 7 5 1 1 1 5 5 C N R 7 2 A B 0 1 2 1 5 C N R 7 7 C B 0 *RoHS COMPLIANT Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type
C650 and C850 Series TBU High-Speed Protectors
*RoHS COMPLIANT Features Formerly brand Extremely high speed performance Blocks high voltages and currents Very high bandwidth; GHz compatible Small package, minimal PCB area Simple, superior circuit protection
Green. Part Number Qualification Case Packaging B1X0Q-13-F Automotive SMA 5,000/Tape & Reel B1X0BQ-13-F Automotive SMB 3,000/Tape & Reel
reen 1.0A SURFAE MOUNT SHOTTKY BARRIER RETIFIER Product Summary B120Q/BQ-B140Q/BQ V RRM (V) I O (A) V F Max (V) I R Max (ma) T A = +25 T A = +25 20/30/40 1.0 0.5 0.5 B150Q/BQ, B160Q/BQ V F Max (V) I R
MCR08B, MCR08M. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 AMPERES RMS 200 thru 600 VOLTS
MCR8B, MCR8M Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls,
SESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
VT-802 Temperature Compensated Crystal Oscillator
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
Pulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
MMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
![November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]](/thumbs/29/13476958.jpg "November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
VS-500 Voltage Controlled SAW Oscillator
VS-500 Voltage Controlled SAW Oscillator Features Improved High Performance ASIC Industry Standard Package, 9 x 14 x 4.5 mm Frequencies from 155 MHz to 850 MHz 3.3 V or 5.0 V Operation At 155.52 MHz, Jitter
February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]
![February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]](/thumbs/19/266676.jpg "February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
DOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
WCAP-CSGP Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor
NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
PRODUCT SPECIFICATION
PRODUCT SPECIFICTION SMD Type Size (mm):3.2*1.6*1.1 Emitting Color:White SMT package Suitable for all SMT assembly and soldering method Pb-free Reflow soldering application RoHS Compliant Features: Light
IN1M101 Precision AC Brown-out Supervisor IC
Precision AC Brown-out Supervisor IC Rev.1.1 03 30 2011 Specification General Description provides a precise comparator to detect the rectified AC voltage, which could protect the SPS when AC voltage is
January 2015. Inductors for Power Circuits. Wound Ferrite. VLCF Series. VLCF5028-2 Type VLCF5028-2
January 2015 Inductors for Power Circuits Wound Ferrite VLCF Series VLCF5028-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
BSP52T1 MEDIUM POWER NPN SILICON SURFACE MOUNT DARLINGTON TRANSISTOR
Preferred Device This NPN small signal darlington transistor is designed for use in switching applications, such as print hammer, relay, solenoid and lamp drivers. The device is housed in the SOT-223 package,
VS-702 Voltage Controlled SAW Oscillator Previous Vectron Model VS-720
VS-702 Voltage Controlled SAW Oscillator Previous Vectron Model VS-720 VS-702 Description The VS-702 is a SAW Based Voltage Controlled Oscillator that achieves low phase noise and very low jitter performance.
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
Fractus Compact Reach Xtend
Fractus Compact Reach Xtend Bluetooth, Zigbee, 82.11 b/g/n WLAN Chip Antenna Antenna Part Number: FR5-S1-N--12 This product is protected by at least the following patents PAT. US 7,148,85, US 7,22,822
MMBF4391LT1G, SMMBF4391LT1G, MMBF4392LT1G, MMBF4393LT1G. JFET Switching Transistors. N Channel
LT1G, SLT1G, LT1G, LT1G JFET Switching Transistors NChannel Features S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ1 Qualified and PPAP Capable
Standard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
13.5-40.5GHz Frequency Multiplier. GaAs Monolithic Microwave IC. Output power (dbm) -10 -15 -20 -25 -30
Output power (dbm) GaAs Monolithic Microwave IC Description The is a packaged monolithic time three multiplier which integrates input and output buffer. This circuit is a very versatile multiplier for
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
Antenna Part Number: FR05-S1-R-0-105
Fractus EZConnect Zigbee, RFID, ISM868/9 Chip Antenna Antenna Part Number: FR5-S1-R--15 This product is protected by at least the following patents PAT. US 7,148,85, US 7,22,822 and other domestic and
SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
SPECIFICATION FOR APPROVAL. Approved by
C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,
SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
NUD4001, NSVD4001. High Current LED Driver
NUD, NSVD High Current LED Driver This device is designed to replace discrete solutions for driving LEDs in low voltage AC DC applications. V, V or V. An external resistor allows the circuit designer to
WL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
STF202-22. USB Filter with ESD Protection
STF202-22 USB Filter with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in upstream USB ports, ellular phones,
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
Features. Case: TO-220-3 (2), TO-220F-3 (Option 1), TO-252-2 (1) and TO- 263-2 Power Management Instrumentation
HIGH VOLTAGE POWER SCHOTTKY RECTIFIER Product Summary V F (MAX) (V) I R (MAX) (ma) V RRM (V) I O (A) @ +25 C @ +25 C 100 2x10 0.85 0.1 Description High voltage dual Schottky rectifier suited for switch
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
MP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 600 Ω ±25% Maximum impedance 80 MHz Z 650 Ω typ. Rated
Data Sheets of AVA Technology SMD Type White LED. Model : T5050. AVA Technology Co.
Data Sheets of AVA Technology SMD Type White LED Model : AVA Technology Co. 2640 S. Myrtle Ave. Suite 6 Monrovia, CA 91016 P: 626-574-7726 F: 626-574-7732 http://www.led4light.com Top View LED with Reflector
SMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 600 watts pplications n I 600-4-2 S (Min. Level 4) n I 600-4-4 T n I 600-4-5 Surge
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
MINIATURE SURFACE MOUNT RELAY
FTR-K1 SERIES MINIATURE SURFACE MOUNT RELAY 1 POLE - 25A (For Automotive Applications) FTR-P6 Series FEATURES Surface mount relays for automotive applications Miniature size (67% of the volume of FTR-P3
1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
High flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
Solder Reflow Guide for Surface Mount Devices
June 2015 Introduction Technical Note TN1076 This technical note provides general guidelines for a solder reflow and rework process for Lattice surface mount products. The data used in this document is
ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection
4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers
How To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
PRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
MMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
CM1402. SIM Card EMI Filter Array with ESD Protection
SIM ard EMI Filter Array with ESD Protection Product Description The M1402 is an EMI filter array with ESD protection, which integrates three pi filters ( R ) and two additional channels of ESD protection.
Data Sheet. HSMP-382x, 482x. Surface Mount RF PIN Switch and Limiter Diodes. Features. Description/Applications
HSMP-382x, 482x Surface Mount RF PIN Switch and Limiter iodes ata Sheet escription/applications The HSMP-382x series is optimized for switch ing applications where ultra-low resistance is required. The
3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header 2 2 Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible
Surface Mount Technology cooling for high volumes applications by: Cesare Capriz Aavid Thermalloy via XXV Aprile 32 Cadriano (BO) ITALY
Surface Mount Technology cooling for high volumes applications by: Cesare Capriz Aavid Thermalloy via XXV Aprile 32 Cadriano (BO) ITALY Abstract: The automotive technology is fast moving in integrating
STIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
SPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability
DSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
Metal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
1.0A LOW DROPOUT LINEAR REGULATOR
1.0A LOW DROPOUT LINEAR REGULATOR Description Pin Assignments The is a low dropout three-terminal regulator with 1.0A output current ability, and the dropout voltage is specified at typical 1.1V at 1.0A
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
Teccor brand Thyristors EV Series 0.8 Amp Sensitive SCRs
SxX8xSx Series RoHS escription New device series offers high static dv/dt and lower turn off (t q ) sensitive SR with its small die planar construction design. It is specifically designed for I (round
EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
SLG7NT4129 PCIE RTD3. Pin Configuration. Features Low Power Consumption Dynamic Supply Voltage RoHS Compliant / Halogen-Free Pb-Free TDFN-12 Package
General Description Silego SLG7NT4129 is a low power and small form device. The SoC is housed in a 2.5mm x 2.5mm TDFN package which is optimal for using with small devices. Features Low Power Consumption
Specification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Silicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
NUD4011. Low Current LED Driver
NUD0 Low LED Driver This device is designed to replace discrete solutions for driving LEDs in AC/DC high voltage applications (up to 00 V). An external resistor allows the circuit designer to set the drive
Cree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
CMS Common mode inductors, surface mount
Technical Data 4313 Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use
Automotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
Cree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
PDB18 Series - 17 mm Rotary Potentiometer
*RoHS COMPINT eatures Single and dual section control Metal shaft styles Carbon element Center and multiple detent options Wide range of resistance tapers Plain or knurled shaft options PDB18 Series -