Project Management Services. Mechanical Services. Support Services. Electrical Services. Clean Room Services. Blade Sharpening
|
|
- Derrick Maxwell
- 7 years ago
- Views:
Transcription
1 Project Management Mechanical Support Electrical Clean Room Blade Sharpening The total solution to all your engineering needs
2 PROJECT MANAGEMENT Project management serves as the client s project management team throughout the project life-cycle Our familiarity with a broad range of project implementations means our knowledge and experience is world-class. can deliver IT management solutions that fit the needs of your project. Scheduling and reporting Successful project management depends on consistent, accurate reports as well as the ability to control costs and meet target schedules. Our integrated cost control system and critical-pathmethod (CPM) scheduling services provide our clients with the controls they need in order to succeed. Engineering support Qualified and experienced staff offer professional advice and support to all size projects. offer unrivalled levels of support to systems that they have sold and commissioned, as well as systems, which you may have purchased from another supplier. CAD drawings, engineering and operations manuals complete the service package to our customers Procurement Over the years, have compiled a master list of reputable and qualified vendors. With this in place, they can align our clients with capable contractors, in the right locations. Start-up and commissioning manage the start-up effort, ensuring compliance with the associated specifications and contracts to ensure an efficient and timely hand-over to the client. will co-ordinate the activities affecting the process of construction hand-over to start-up and final hand-over to the client.
3 MECHANICAL Equipment installation Relocate existing machines Install new machines Remove and transport machines Alignment and Levelling Commissioning Service installation Water, cooling water and chilled water lines Steam, high & medium pressure hot water lines and boilers Process line chemical in stainless steel, mild steel, polypropylene and PVC piping Sprinkler systems Machine Modification Design, manufacture and commission modifications to new and existing equipment
4 SUPPORT Fabrication Workshop facilities include Lathes, milling machines, cutting and welding equipment Assembly, bending & folding Maintenance Equipment overhauls and rebuilds Pump, Valve and Gearbox servicing Contract labour experienced industrial fitters Safety Works Engineer, fabricate and install handrails, guardrails and railing systems in various finishes, suitable for industrial premises looking to meet H&S obligations
5 ELECTRICAL Installations Install electrical services to new and relocated equipment Disconnection and removal of electrical services from existing machines Commissioning of new and modified machines Cables and cable tray CAT5 networking Control Panel Building Design electrical control panels for operation of new and upgraded equipment Build panels including variable speed drives AC & DC Installation and testing PLC programming Design and implementation of PLC programmes PLC interfacing with operator screen Batch systems and sequence control Communication with speed drives Measurement control using PLC and encoder systems
6 CLEAN ROOM Machine Moves Equipment available includes Air skates, skids Electric fork trucks & winches Crane Machine Installation Injection moulding Assembly machines CMM Packaging, loading and unloading Machine levelling / alignment Connecting electrical and mechanical services Commissioning Manufacture and supply of Manifolds Robot installation Electrical Air lock access systems Networks CCTV Lighting installations Buss-bar Clean Room Specific Installations are carried out to meet Class 10k and above Clean Room standards Material feed systems Manufacture and install service poles Chiller Units and chilled water installations Installation of heat exchangers Injection Moulding Machine Overhauls and servicing Ejector plate / platen drilling and tapping
7 BLADE SHARPENING s blade grinding and sharpening services department provides high quality precision regrinding with quick turnaround times. can re-sharpen your dull, worn shear blades and discs to like new condition. Your blades and discs will be cutting like new once they have been restored. machine sharpen all edges to remove the burrs. All blades are lightly oiled to prevent rusting and wrapped prior to shipment to your works. A sharpened blade will; Improve operating efficiency Reduce your wastage Reduce operating costs Brake press & guillotine blades up to 4 ½ meters / 16 ft in length Granulator blades Anvils Discs Gockel G40el Horizontal Grinding
8
APEC CAPABILITIES PROJECT MANAGEMENT / SUPPORT
PROJECT MANAGEMENT / SUPPORT Capital Cost Savings Construction Monitoring and Assistance In-Plant Production Assistance In-Plant Maintenance Assistance Procurement Assistance Project Cost Estimating o
More informationALIKO Oy Ltd. Finn-Power Oy
ALIKO Oy Ltd Huhmarinmäentie 38 FIN-31700 Urjala, Finland Tel. +358 20 728 0370 Fax +358 20 728 0389 http://www.aliko.fi CNC Press brakes CNC Guillotine shears Water jet cutting systems Plasma cutting
More information(888)500-8700 T H E E Q U I P M E N T M O V I N G S P E C I A L I S T S
M A C H I N E R Y M O V I N G - R I G G I N G & H E A V Y L I F T I N G - F A C I L I T Y R E L O C A T I O N T R A N S P O R T A T I O N - W A R E H O U S I N G - C R A T I N G & P A C K A G I N G (888)500-8700
More informationMechanical Piping Instrumentation/Electrical & Controls Civil/Structural Fabrication & Machine
Mechanical Piping Instrumentation/Electrical & Controls Civil/Structural Fabrication & Machine Hawk Installation and Construction, Inc. Hawk Installation and Construction, Inc. is a general contracting
More informationDESIGN & PROJECT MANAGEMENT
AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,
More informationPump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
More informationFacility Support Services
Facility Support Services The Precision Group has a breadth of experience delivering innovative, first class facility support service solutions to clients across the public and private sectors. Our expert
More informationMechanical Engineering Technician- Plant Technician
Mechanical Engineering Technician- Plant Technician A competent Mechanical Engineering Technician- Plant Maintenance is expected to: 1. Ability to plan and execute work in a safe and responsible manner
More information! WARNING. McDonnell & Miller Installation & Maintenance Instructions MM-217(I) Series 150S and 157S (Snap Switch, All Models except 157S-RB-P)
Series 150S and 157S (Snap Switch, All Models except 157S-RB-P) Low Water Cut-Off/Pump Controllers For Steam Boilers and Other Level Control Applications McDonnell & Miller Installation & Maintenance Instructions
More informationManufacturing & Servicing Capabilities
Manufacturing & Servicing Capabilities Fabrication of Heavy / Large Equipment Heavy Machining Capability Service of Mechanical & Hydraulic Equipment Capabilities: Heavy Fabrication Heavy Machining Design
More informationdrawworks WWL started manufacturing drawworks over 40 years ago under the BDW brand. draw on our experience BDW Model 2000-MX or MXE
Our experience benefits our customers WWL started manufacturing drawworks over 40 years ago under the BDW brand. Within the Oil & Gas drilling industry, the BDW brand is known as the Cadillac of drawworks.
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More informationMaterials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
More informationJUBILEE TECHNICAL TRAINING CENTRE TAKORADI POLYTECHNIC 2015 TRAINING PROGRAMMES
JUBILEE TECHNICAL TRAINING CENTRE TAKORADI POLYTECHNIC 2015 TRAINING PROGRAMMES Main Courses Duration: 26 weeks 1. NVQ Level 2 Performing Process Operation in Replicating Environment 2. NVQ Level 2 Performing
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationSCHOOL OF TRADES, ENGINEERING AND CONSTRUCTION
SCHOOL OF TRADES, ENGINEERING AND CONSTRUCTION National Certificate in Mechanical Engineering (Level 2) Certificate in Engineering - Light and Heavy Fabrication (Level 2) National Certificate in Motor
More informationIntegrated Services Workshop Services
Integrated Services Workshop Services Erlangen, 2009 Industry Sector, Mobility Division Page 1 We have the power of high-skilled personnel providing solutions worldwide Our worldwide expertise Project
More informationJobson THE RIGHT CONTACT
THE RIGHT CONTACT Jobson Italia srl was set up in 1990. The following services are rendered 365 days a year, 24 hours a day: Stocking and trading of spare parts: Main Engines, auxiliary engines, pumps,
More informationThermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationORC TURBOGENERATOR TYPE CHP - Organic Rankine Cycle Turbogenerator fed by thermal oil, for the combined production of electric energy and heat -
Doc. : 08C00031_e Date : 10.02.2009 Page : 1 / 9 ORC TURBOGENERATOR TYPE CHP - Organic Rankine Cycle Turbogenerator fed by thermal oil, for the combined production of electric - (Preliminary) Doc. : 08C00031_e
More informationYour Service Partner Avonmouth and Bristol Service Centres
Your Service Partner Avonmouth and Bristol Service Centres The Sulzer Advantage Avonmouth Service Centre Bristol Service Centre Capabilities Manual machining CNC machining Pump services Thermal spray
More informationAUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
More informationE-Version SECTION 15318 - CHLORINATION SYSTEM PART 1 - GENERAL PART 2 - PRODUCT
SECTION 15318 - CHLORINATION SYSTEM PART 1 - GENERAL 1.1. SCOPE OF WORK A. Under this item the Contractor shall furnish and install a sodium hypochlorite solution metering system complete with all accessories
More informationMARC5001A Employ tools, equipment and materials in a shipboard context
MARC5001A Employ tools, equipment and materials in a shipboard context Release 1 MARC5001A Employ tools, equipment and materials in a shipboard context Modification History Release 1 This is the first
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 23 Rev: 01 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 DEFINITIONS
More informationLaser Technology www.trio-oiltec-services.com
Laser Technology www.trio-oiltec-services.com Wear protection specialists since 1995 Leading contractor Oil & Gas industry SERVICE 24 hours 7 days a week Trio OilTec Services was founded in 1999 and became
More informationTopics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
More informationT146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes
T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes* The graduate has reliably demonstrated the ability to: 1. fabricate
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationABOUT X-Y X Y TOOL AND DIE
ABOUT X-Y X Y TOOL AND DIE X-Y Tool And Die has been in business since 1971. Thats when we started producing fixtures, gages, tools, prototype parts and quality machined parts for the manufacturing industry.
More information:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationPVC Installation and Tapping For Potable Water and Sanitary Sewer. Handling and Installation Practices Manual
PVC Installation and Tapping For Potable Water and Sanitary Sewer Handling and Installation Practices Manual Table of Contents Introduction...1 Shipping and Handling...1 Handling and storage of pipe and
More informationInformation Technology Solutions
S AV E S M O N E Y Can reduce water consumption and waste disposal costs. Wastewater treatment with Vacuum Evaporation Systems Water treatment made easy! E NV IR O N ME NT F R IE N DLY Recycle water and
More informationTRANSFORMERS AFTERMARKET SPARES, SERVICE & REPAIR
TRANSFORMERS SPARES, SERVICE & REPAIR 02 TRANSFORMERS ENERGY SOLUTIONS FOR THE GLOBAL POWER INDUSTRY BRUSH Transformers is globally renowned for the quality of its products, innovation and service. Our
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationINSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES
INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES GREAT PRODUCTS ARE ONLY PART OF OUR SUCCESS. YOU SHOULD MEET OUR PEOPLE. From the machinist with over 20 years experience
More informationCITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER This information is being given to you to describe potential opportunities as a Helper. The career ladders that Helpers
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationOFFICINA MECCANICA GHEDA T. & C. s.n.c. Via Brolo 43 25075 Muratello di NAVE (BS)
GENERAL CATALOGUE ED.2011 Founded in 1962 by Gheda Tranquillo, The OFF.MECC.GHEDA T. intends be a serious and responsible partner for the third party work and like from the year of foundation always follow
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationSAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE
1 Which tool is used to correct internal hi-low when preparing a 4-in. steel pipe for welding? A. 4-in. grinder with cutting disc. B. Mini-grinder with flapper disc. C. Pencil grinder with cone stone.
More informationvacon ac drives for mining & minerals
vacon ac drives for mining & minerals 1 strong experience in mining & minerals Vacon AC drives are robust to handle your most demanding requirements from simple ventilation to the most complex load sharing
More informationDESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT
DESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT THE PTM ADVANTAGE PTM has been producing metal stampings since 1972. Our expertise and experience is wide ranging, to include detail part
More informationCEILING CASSETTE FAN COIL UNIT
CEILING CASSETTE FAN COIL UNIT Operation and Installation Manual MHCFC4W-04, 08, 12, 16 Four way ceiling cassette fan coil unit Please read this manual before using the fan coil unit. Installation and
More informationMaterial Comparison Lower Quality Blender Optimum 9400. Electric Motor Assembly. Plastic Fans Low cost
Below is a factual comparison between our Optimum 9400 model and a lower quality high-speed blender dated May 20 th 2014. This comparison has been independently conducted, reviewing the key components
More informationAPPLICATION COMPETENCY FIELD
UNIT CODE UNIT TITLE APPLICATION COMPETENCY FIELD ELEMENTS Elements describe the essential outcomes. 1 Follow safe work practices MARC018 Employ tools, equipment and materials in a shipboard context This
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationSERVING THE NATIONS LEADING COMPANIES
SERVING THE NATIONS LEADING COMPANIES Amerada Hess BP Chemical BP Refining & Pipeline Citgo Petroleum Corporation Colonial Pipeline Conoco Phillips Pipeline Enbridge Energy Company, Inc. Equistar Chemical
More informationWater Main Break During Normal Operating Hours
Emergency Guideline GU.FAC.018 - Version 1.0 For Project Supervisor, Team Leader, Caretakers, Trades Approved by FS Leadership Team, March 27, 2013 In addition to fixing water main breaks on its own property,
More informationSERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationCDS TROUBLESHOOTING SECTION I. VACUUM. 1.0. Weak vacuum at wand. Gauge reads normal (10hg to 14hg)
CDS TROUBLESHOOTING SECTION I. VACUUM 1.0. Weak vacuum at wand. Gauge reads normal (10hg to 14hg) 1.1. Clogged hoses or wand tube. Disconnect hoses and carefully check for an obstruction. 1.2. Excessive
More informationVisions become real. Temperature control and cooling systems. The innovative and reliable solution
Temperature control and cooling systems The innovative and reliable solution With our PulseTemp equipment you have the option of up to 72 cooling circuits in the impulse cooling, temperature control, temperature
More informationFIRE DETECTION BUILDING AUTOMATION CAPITAL PROJECTS HVAC SERVICES SECURITY SYSTEMS PROJECT MANAGEMENT. www.msssolutions.
HVAC SERVICES BUILDING AUTOMATION FIRE DETECTION SECURITY SYSTEMS CAPITAL PROJECTS 877-372-4344 PROJECT MANAGEMENT HVAC SERVICES Superior Technical Staffing Unrivaled Customer Service Industry-wide Reputation
More informationGeneral Allowances for Insulation & Cladding
TRADE OF Industrial Insulation PHASE 2 Module 1 Sheet Metal and Insulation Fundamentals UNIT: 4 General Allowances for Insulation & Cladding Produced by In cooperation with subject matter expert: Michael
More informationLos Angeles Trade Technical College Student Employment Center. Diesel & Related Technology Full Time
Job Title: Composite Mechanic Job Number: 923 Hours/Days: 7a-3p Salary: $22.29-22.53/ hr Requirements: Skills Requirement: Be familiar with AC/DC power and control systems; Maintain certification acquired;
More informationIndustry Solutions Process Manufacturing Flexible and Agile Engineering Document Control for Efficient, Safe and Compliant Plants
Industry Solutions Process Manufacturing Flexible and Agile Engineering Document Control for Efficient, Safe and Compliant Plants Industry Solutions Key Challenges Facing Process Manufacturing High energy
More information2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
More informationHamilton Form Company, Ltd Custom Designs, Flexible Solutions
Hamilton Form Company, Ltd Custom Designs, Flexible Solutions 1 IFC 2 CUSTOM DESIGNS, FLEXIBLE SOLUTIONS Hamilton Form has been designing and building custom steel forms for the precast industry since
More informationAKE AMS & MMS ORK FOR
AKE AMS & MMS ORK FOR OU Allart Oskam PAGE 1 Before we start, Safety First Emergency exits Fire drills planned? Emergency assembly point Follow the leader STORK TECHNICAL SERVICES 3 Stork Technical Services
More informationMould and Die Standard Parts
Mould and Die Standard Parts Tampere University of technology - Tuula Höök Mould standard parts can be divided into the following groups: Standard mould set with guide bars, guide sleeves and other guiding
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationZakład Metalowy ALEM. Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl
Zakład Metalowy ALEM Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl We as ALEM have many years of experience in processing metals. We offer you a high variety of services in machining, electrical
More informationBackup Fuel Oil System Decommissioning & Restoration Plan
Backup Fuel Oil System Page 1 of 19 Overview of Physical Fuel Oil System and Decommissioning Steps The fuel oil system at Milford Power consists of a number of subsystems. These include the following:
More informationBranch out with lateral cutting & drain cleaning
Branch out with lateral cutting & drain cleaning Succeed with smart solutions for trenchless small diameter drain rehabilitation 1¼ - 8 THE SMART CUTTER PRODUCT OF THE YEAR 2012 Re-instatement solutions
More informationFRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER
NUBIRA/LACETTI FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER 6 1 SECTION 6 FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER CONTENTS 1. FRAME DOOR OPENING........................................... 6 2 1.1.GENERAL
More informationbuilding engineering services association specification for: Domestic Heating www.thebesa.com
building engineering services association specification for: Domestic central Heating installation www.thebesa.com building engineering services association acknowledgments Guide to good practice: Domestic
More informationEDICATED TO ONTINUITY
EDICATED TO ONTINUITY HIGH QUALITY BLADES DELIVERED WITH UNRIVALLED SPEED FOR THE AFTERMARKET OF TURBO MACHINERY INDUSTRY. ASSET LIFECYCLE INTEGRITY PARTNER HIGH QUALITY BLADES STORK IS A WORLD CLASS ASSET
More informationMachine Moving. By Norm Berls
Machine Moving By Norm Berls Machine Moving Sources Metalworking: Sink or Swim by Tom Lipton Google Images Vendor Web Pages YouTube Own experiences Formerly professional riggers and movers moved most heavy
More informationInstallation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5
INSTALLATION GUIDE Installation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5 Take every precaution to make this installation a safe procedure. Make safety the number
More informationCOMPANY NAME: STREET ADDRESS: CITY: STATE: ZIP: COUNTRY: Have you previously been a supplier member? Yes No If yes, most recent year:
COMPANY NAME: STREET ADDRESS: MAILING ADDRESS: International Liquid Terminals Association 1005 N. Glebe Road, Suite 600 Arlington, VA 22201 Phone: (703) 875-2011 Fax: (703) 875-2018 E-mail: info@ilta.org
More informationDrilling Rigs, Equipment & Parts
Drilling Rigs, Equipment & Parts Rig Manufacturing, LLC Manufacturing Solutions Drilling Rig Packages We can offer NEW USA made drilling rig packages in traditional SCR-DC or VFD-AC. These rig packages
More informationQuality. Tool Service, Inc. Advanced Tooling & Manufacturing Solutions
dvanced Tooling & Manufacturing Solutions Design & Engineering dvanced Tooling & Manufacturing Solutions Welding fixtures Stamping tools Robotic end of arm tooling Robotic work cell development and simulation
More informationLos Angeles Trade-Technical College Student Employment Center. Electrical Construction and Maintenance. Full Time
Job Title: Journeyman full time Job Number: 1401 Hours/Days: Varies Salary: $25-35/hr Approximate Location: Buena Park, CA Skills Requirement: 1-3 years experience, Commercial electrical work. Job Description:
More informationDEVELOPMENT OF SMALL INJECTION MOULDING MACHINE FOR FORMING SMALL PLASTIC ARTICLES FOR SMALL-SCALE INDUSTRIES
Journal of Engineering Science and Technology Vol. 5, No. 1 (2010) 17-29 School of Engineering, Taylor s University College DEVELOPMENT OF SMALL INJECTION MOULDING MACHINE FOR FORMING SMALL PLASTIC ARTICLES
More informationWater Main Breaks After Normal Operating Hours
Emergency Guideline GU.FAC.019 - Version 1.0 For Project Supervisor, Team Leader, Caretakers, Trades Approved by FS Leadership Team, March 27, 2013 Water Main Breaks After Normal Operating Hours Introduction
More informationAGENDA STAFF REPORT. Budgeted: Yes Current Year Cost: $695,000 Annual Cost: N/A
AGENDA STAFF REPORT Agenda Item ASR Control 13-001267 MEETING DATE: 10/22/13 LEGAL ENTITY TAKING ACTION: Board of Supervisors BOARD OF SUPERVISORS DISTRICT(S): 2 SUBMITTING AGENCY/DEPARTMENT: John Wayne
More informationPiping Systems for Nuclear Power Industry. Prague, October 2011
Piping Systems for Nuclear Power Industry Prague, October 2011 Introduction of the company Leading Czech supplier of piping systems for power engineering 60 years of experience in the field of power industry
More informationComputer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y
MFGE 404 Computer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y Manufacturing Engineering Department Lecture 1 - Introduction Dr. Saleh AMAITIK Fall 2005/2006 Production Systems Production
More informationEngineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
More informationCNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
More informationBEUMER solutions for the
BEUMER solutions for the building materials industry Efficient. Safe. conveying & loading BEUMER solutions for the building materials industry 2 3 Family values, sustainable products, true pioneering spirit
More informationCOMMERCIAL REPORT / STOCK CONDITION SURVEY. Sydenham Hill Estate Sydenham Hill London SE 23
COMMERCIAL REPORT / STOCK CONDITION SURVEY For Sydenham Hill Estate Sydenham Hill London SE 23 Submission Prepared by Gas Advisory Services Limited Date: 4 th June 2013 Gas Advisory Services Limited Phoenix
More informationVeenstra Group Your Partner
Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance Off Shore Valves & Parts General Information Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance
More informationNominal Life Expectancy for Building Components
Nominal Life Expectancy for Building Components Building System Page A. HVAC 2 B. Elevator/Escalator 6 C. Plumbing 7 D. Roofing 8 E. Electrical 10 F. Fire/Life/Safety/Security System 11 G. Interior Finishes
More informationTABLE 1A. Educ ation and Wage s Group: Machine Technology Region: Southwest Minnesota
TABLE 1A. Educ ation and Wage s Group: Machine Technology Education Level Median Wage Computer Numerically Controlled Machine Tool Programmers, High school diploma or equivalent $21.40 Metal and Plastic
More information10% or 500,000 gallons/year of Crude Glycerine. Shutdown: 2009 B100 BioDiesel or Crude Glycerine Soybean Oil or Animal Tallow, Methanol
IMMEDIATELY AVAILABLE FROM IPP BioDiesel Plant 5 MM Gallons/Year Brief Overview Capacity: 5,000,000 gallons/year Byproduct: 10% or 500,000 gallons/year of Crude Glycerine Built: 2007 Shutdown: 2009 Product:
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationButterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
More informationTypical TIG-plasma solutions
Typical -plasma solutions 2228-005 2003-670 Boilers maker solutions 2004-257 1210-064 1210-067 64 3638-008 2008-400 1415-014 2000-169 2003-204 1467-003 2000-343 2000-160 Pipework solutions or plasma welded
More informationMAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure
MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4
More informationPlastic Injection Molds
Training Objective After watching the program and reviewing this printed material, the viewer will become familiar with the variety, design, and productive use of plastic injection molds. Mold components
More informationWorkplace Incident Fatalities Accepted by the Workers Compensation Board in 2014
Workplace Incident Fatalities Accepted by the Workers Compensation Board in 2014 Workplace Incident Fatalities Year to date, numbers as of December 31, 2014 Workplace Incident fatalities are cases where
More informationSPECIFICATIONS FOR TENDER NO: PSNR/SCP/VKS/E 1635 ANNEXURE I TECHNICAL SPECIFICATIONS FOR LIGHTING HIGH MAST
TECHNICAL SPECIFICATIONS FOR LIGHTING HIGH MAST ANNEXURE I Sl.No. Description for BHEL Requirement Offered Deviation Scope of supply, erection and commissioning: 1 The scope of this specification covers
More informationDistributor of Industrial Pipe, Valves, & Fittings 351 Smith Street Perth Amboy NJ 08861
Distributor of Industrial Pipe, Valves, & Fittings 351 Smith Street Perth Amboy NJ 08861 Our History Established in 1978 Located in Perth Amboy NJ at the crossroads of several major NJ/NY roadways and
More informationMetalworking to go. Discover direct on-site mobile machining!
Metalworking to go Discover direct on-site mobile machining! Benefit from intelligent machining methods right on site With Miba s mobile CNC machining units Wherever and whatever you want to machine directly
More informationSYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING
SYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING INDEX 1. Introduction 3 2. Objectives 3 3. Employment Opportunity 4 4. Course Structure 4 5. Entry Qualification 4 6. List
More informationENGINEERING & CONSULTANCY PRODUCTION & ASSEMBLY SERVICE & SITE APPLICATION
a r t ne r f or s t CASTING TECHNOLOGY PROCESS ROLLING PROCESS ee ro c l oba l l y hy d r u p l ic lp a STEEL MAKING PROCESS PLANT REVAMPING AND NEW INSTALLATIONS ou rg es s REHEATING PROCESS Y www.completehydraulicsolutions.com
More informationBest Practice Guide BPGCS007
Best Practice Guide BPGCS007 ENERGY MANAGEMENT Introduction: With rising fuel costs, opening of electricity and gas markets to alternate suppliers and climate change, the requirement to monitor and reduce
More information