CML60 Valve Build Program 60 l/min (15.8 gpm) 325 bar (4700 psi)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "CML60 Valve Build Program 60 l/min (15.8 gpm) 325 bar (4700 psi)"

Transcription

1 CML60 Valve Build Program 60 l/min (15.8 gpm) 325 bar (4700 psi)

2 CML60 Valve Build Program The CML60 Build Program leverages the versatile and modular product design of the CML60 valve; enabling a stocking distributor to add further value for end customers in the following ways: First to deliver a custom valve solution for a customer requirement Quick response to dynamic customer needs and modifications Product Overview The Eaton CML60 mobile valve is a load sensing, sectional proportional valve with a highly versatile design that offers extensive relief options through the use of standard C-10-2 relief cavities. The CML60 valve can be utilized across the breadth of pump types ranging from fixed displacement pumps to pressure compensated, load sensing variable displacement pumps. Increased productivity is the key user benefit of the CML60 load sensing proportional valve. This operator efficiency is achieved because each valve function is proportional to the spool position under all load conditions and independent of the number of valve funtions in operation providing the total demand flow is less than pump flow. Additional benefits of the CML60 load sensing proportional valve include energy savings due to less fuel consumption and heat dissipotion. Rated Flow: Inlet: to 100 l/min (26.3 USgpm) Section: to 60 l/min (15.8 USgpm) Rated Fatigue Pressure per NFPA T2.6.1: 280 bar (4050 psi) Inlet Qualified at 1 million cycles at 325 bar (4350 psi) test pressure 300 bar (4350 psi) Work Ports Qualified for 1 million cycles at 350 bar (5075 psi) test pressure Standard Circuit Design Parallel circuit, closed center load sensing, inlet pressure compensated Actuation Options Hydraulic Electrohydraulic Proportional Table of Contents CML60 Build Program 2 Kit Components 3 Operating Sections Inlet Module Endcover Kit Tie-bolt Kits Accessories Exploded View Bank Assembly 3 Electro Hydraulic Section Assembly 4 Electro Hydraulic End Cover Assembly 4 Hydraulic Section Assembly: Without Override 5 Inlet Assembly 6 Service 7 Spool Configurations Solenoid Valves Seal Kits & Other 2 eaton CML60 Valve Build Program E-VLMD-MC001-E March 2011

3 Exploded View CML60 Bank Assembly 'T' Port 'P' Port 'A' Port 'B' Port Ls Port Mounting Bracket Open Centre Inlet Assembly Tie Stud Nuts 44±4 N-m Electro Hydraulic With Manual Override Section Assembly Electro Hydraulic End Cover Assembly Mounting Bracket Kit Components CML60 Operating Sections 220AP00106A 220AP00107A 220AP00035A 220AP00039A 220AP00108A 220AP00008A CML60 Inlet Module 220AP00105A 220AP00111A 220AP00112A 220AP00113A EH, SAE-10 ports, plugged WP cavities, double acting motor spool-60 lpm, 12 VDC- Integral Deutsch As above, also includes manual handle override lever. EH, SAE-10 ports, plugged WP cavities, double acting cylinder spool-60 lpm, 12 VDC- Integral Deutsch As above, also includes manual handle override lever. Hydraulic pilot, SAE-10 ports, plugged WP cavities, double acting motor spool-60 lpm. Hydraulic pilot, SAE-10 ports, plugged WP cavities, double acting cylinder spool-60 lpm. Load Sensing inlet, side ported, SAE-10 P port, SAE-12 T port with section seals. Unloading (Open Center) inlet, top ported, SAE-10 P port, SAE-12 T port with LS 2000 psi and section seals. Unloading (Open Center) inlet, top ported, SAE-10 P port, SAE-12 T port with LS 2500 psi and section seals. Unloading (Open Center) inlet, top ported, SAE-10 P port, SAE-12 T port with LS 3000 psi and section seals. CML60 Endcover Kit Standard EH end cover with internal pilot supply and drain. Contains integral pressure reducing valve Standard hydraulic end cover CML60 Tie-bolt Kits Tie bolt kit - one working section Tie bolt kit - two working sections Tie bolt kit - three working sections Tie bolt kit - four working sections Tie bolt kit - five working section Tie bolt kit - six working sections Tie bolt kit - seven working sections Tie bolt kit - eight working sections CML60 Accessories 302AA00025A Unloading cartridge (DPS2-12) for open center inlet Mounting Bracket eaton CML60 Valve Build Program E-VLMD-MC001-E March

4 Exploded View CML60 Electro Hydraulic Section Assembly 34.3±1.7 N-m With Load Sense 'B' Work Port Relief Plugged 'B' Work Port 'B' Port N-m 24.5±1.0 N-m 'A' Port 3 N-m 'A' Work Port Relief Plugged 'A' With Work Port ± 1.0 N-m 34.3±1.7 N-m 8.8 ±0.9 N-m Without Manual Override Type With Manual Override Type Exploded View CML60 Electro Hydraulic End Cover Assembly Pressure Reducing Valve 4 eaton CML60 Valve Build Program E-VLMD-MC001-E March 2011

5 Exploded View CML60 Hydraulic Section Assembly: Without Override 34.3±1.7 N-m 'B' Port 24.5±1.0 N-m 'A' Port With Load Sense Relief Valve 'B' Work Port Relief Plugged 'B' Work Port N-m 'A' Work Port Relief Plugged 'A' Work Port 34.3±1.7 N-m eaton CML60 Valve Build Program E-VLMD-MC001-E March

6 Exploded View CML60 Closed Center (With LS Line And With Or Without System Relief) System N-m Exploded View CML60 Open Center (With LS Relief And DPS Valve) Dps2-12 Cartridge Valve N-m 6 eaton CML60 Valve Build Program E-VLMD-MC001-E March 2011

7 CML60 Service Parts Spool Configurations lpm double acting cylinder spool lpm double acting cylinder spool lpm double acting cylinder spool lpm double acting cylinder spool lpm double acting cylinder spool lpm double acting cylinder spool lpm double acting motor spool lpm double acting motor spool lpm double acting motor spool lpm double acting motor spool lpm double acting motor spool lpm double acting motor spool Soleniod Valves EH pilot valve, 12 vdc, integral Deutsch EH pilot valve, 12 vdc, integral AmpJr EH pilot valve, 24 vdc, integral Deutsch EH pilot valve; 24 vdc with integral AmpJr Seal Kits Section Seal Kit Manual Override Seal Kit Pilot Valve service seals Other Work port cavity plug assembly LS Pilot Relief for Unload Kit Plug Assembly (C-12-3S Cavity) Seal lock nut Manual Handle Override Kit eaton CML60 Valve Build Program E-VLMD-MC001-E March

8 Eaton Hydraulics Group USA Lone Oak Road Eden Prairie, MN USA Tel: Fax: Eaton Hydraulics Group Europe Route de la Longeraie Morges Switzerland Tel: +41 (0) Fax: +41 (0) Eaton Hydraulics Group Asia Pacific Eaton Building 4th Floor, No. 3 Lane 280 Linhong Rd. Changning District Shanghai China Tel: (+86 21) Fax: (+86 21) Eaton Corporation All Rights Reserved Printed in USA E-VLMD-MC001-E August March 2011

Table of contents. Exploded view. Plug/O-ring. Screw, 12pt 17. Shuttle/relief valve Parts shown Enlarged below. Spring. 10 Shims 9

Table of contents. Exploded view. Plug/O-ring. Screw, 12pt 17. Shuttle/relief valve Parts shown Enlarged below. Spring. 10 Shims 9 Table of contents Contents Exploded view 2 Parts list for standard and wheel motor 3 Disassembly, standard and wheel motor 5 Reassembly, standard and wheel motor 7 Disassembly, bearing pack 9 Reassembly,

More information

Service Data Vickers. Piston Pumps. PVH74/81 Variable Displacement Piston Pump - 11 Design. Revised 11/01/97

Service Data Vickers. Piston Pumps. PVH74/81 Variable Displacement Piston Pump - 11 Design. Revised 11/01/97 Service Data Vickers Piston Pumps PVH74/81 Variable Displacement Piston Pump - 11 Design Revised 11/01/97 Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque Limiter

More information

Char-Lynn Disc Valve Motors. Parts Information. 4000 Compact Series

Char-Lynn Disc Valve Motors. Parts Information. 4000 Compact Series Char-Lynn Disc Valve Motors Parts Information 4000 Compact Series Geroler Motors 00 Parts Drawing/List Displacement cm 3 /r [in 3 /r] 0 [ 9.8] 00 [.3] 50 [5.4] 305 [9.8] 395 [4.0] 490 [9.8] Drive, Main

More information

Drill Rigs. Application Notes. Fluid Power in Motion

Drill Rigs. Application Notes. Fluid Power in Motion Drill Rigs Application Notes Fluid Power in Motion Solutions for Drill Rigs. Eaton has the products and capabilities to provide complete system solutions for your application needs. World class hydraulic

More information

Lift Trucks. Application Notes. Fluid Power in Motion

Lift Trucks. Application Notes. Fluid Power in Motion Lift Trucks Application Notes Fluid Power in Motion Solutions for Lift Trucks. Eaton has the products and capabilities to provide complete system solutions for your application needs. World class hydraulic

More information

MONO BLOCK DIRECTIONAL CONTROL VALVE TS1120TSLB

MONO BLOCK DIRECTIONAL CONTROL VALVE TS1120TSLB MONO BLOCK DIRECTIONAL CONTROL VALVE TS112TSLB TS TS212TSTSJB P T TS312TSDTSTKJ TS112TSJB FEATURES: O RG PORTS to eliminate leakage. POWER BEYOND CAPABILITY to fit your multi valve circuits. BUILT ANTI-DROP

More information

Char-Lynn Hydraulic Motors. Repair Information. W Series Geroler Motors 002, 003. April, 1999

Char-Lynn Hydraulic Motors. Repair Information. W Series Geroler Motors 002, 003. April, 1999 Char-Lynn Hydraulic Motors April, 1999 Repair Information W Series Geroler Motors 002, 003 W Series Geroler Motors Tools Required 5/16 inch Hex Key Bullet for Shaft Installation - Eaton Tool No. 600633

More information

Vickers Solenoid Operated Directional Valves

Vickers Solenoid Operated Directional Valves Vickers Solenoid Operated Directional Valves Parts Information Optimized - Soft Shift Function DG4V-3 -**(L) 3 - (P2) - (V) M - ****(L) - **H * - 60 - (P* - A* - B* - T*) ISO 4401, Size 03; ANSI/B93.7M-D03

More information

Industrial Valves. Marketing Catalog. Reliable and continuous performance in the world's most demanding and rigorous applications.

Industrial Valves. Marketing Catalog. Reliable and continuous performance in the world's most demanding and rigorous applications. Industrial Valves Marketing Catalog Reliable and continuous performance in the world's most demanding and rigorous applications. Demanding Applications Call for Eaton Valves to control machine functions,

More information

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,

More information

scx-180 Control focused technology driven SCX valve series SSL-1000 REV 04/09 - SUPERCEDES REV 01/08

scx-180 Control focused technology driven SCX valve series SSL-1000 REV 04/09 - SUPERCEDES REV 01/08 Control focused technology driven SCX valve series scx-18 SSL-1 REV 4/9 - SUPERCEDES REV 1/8 Table of Contents Page Technical Specifications 3 SCX-18 Cut Aways 4 Technical Description, Product Features

More information

How to Use This Booklet

How to Use This Booklet Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With this booklet and a few simple tools, measurement

More information

Dual Path Mobile Pump

Dual Path Mobile Pump Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial

More information

MONO BLOCK DIRECTIONAL CONTROL VALVE TS

MONO BLOCK DIRECTIONAL CONTROL VALVE TS SHIPPING: 2332 S 25TH STREET (ZIP 6815) MAILING: P.O. BOX #669 OMAHA, NE 6816 PHONE: (42) 344-4434 FAX: (42) 341-5419 HTTP://WWW.BRAND-HYD.COM MONO BLOCK DIRECTIONAL CONTROL VALVE TS TS312TSDTSTKJB TS2

More information

Control block EDD Modular Directional Valve

Control block EDD Modular Directional Valve Control block EDD Modular Directional Valve 2 Control block EDD Modular Directional Valve Bosch Rexroth Oil Control S.p.A. introduces this innovatory Directional Control Valve size 8 which allows to create

More information

Pressure Control Valves

Pressure Control Valves Pressure Control Valves Relief Single Multi Pressure Remote Solenoid Manual w w w. FluiDyneFP.com Remote Control Relief Valves Series WFC175 REMOTE CONTROL RELIEF VALVE WFC 175 C 20 DESIGN NUMBER Model

More information

FT1380 & FT1390 Crimp Machines

FT1380 & FT1390 Crimp Machines FT1380 & FT1390 Crimp Machines The FT1380 is a benchtop crimp machine that crimps hydraulic hose assemblies up to 1 1/4" (-20) braided and four spiralwire hose. With the launch of Eaton 6S spiral hose

More information

Char-Lynn Hydraulic Motor. Repair Information. 4000 Compact Series

Char-Lynn Hydraulic Motor. Repair Information. 4000 Compact Series Char-Lynn Hydraulic Motor Repair Information 4000 Compact Series Disc Geroler Motor 001 4000 Compact Series Disc Motors Plate Exclusion Guard Bearing Back-up Washer Shaft Key Bearing and Shaft Assembly

More information

220 Series Piston Pump Typical Applications Features and Benefits

220 Series Piston Pump Typical Applications Features and Benefits Introduction 220 Series Piston Pump Eaton s new 220 Series piston pump signifies a step change in the generation of hydraulic power. Utilizing the latest developments in hydraulic pump technology, the

More information

PUMP UNLOADING VALVES

PUMP UNLOADING VALVES www.elwood.com PUMP UNLOADING VALVES 9 0 0 1 : 0 0 0 C E R T I F I E D C O M P A N Y Features Designed for the manufacturing environment, Elwood offers a full line of Pump Unloading equipment specifically

More information

L: 5.3 in (134.2 mm) x W: 5.8 in (146.2 mm) x H: 2.3 in (58.6 mm) Weight C(USB use is limited to 85 C) IP rating

L: 5.3 in (134.2 mm) x W: 5.8 in (146.2 mm) x H: 2.3 in (58.6 mm) Weight C(USB use is limited to 85 C) IP rating HFX20m Programmable Controller Part number: 102EC21400A Programmed with Eaton Pro-FX control software 32-bit processor, 20 I/O (10 inputs & 10 outputs), 3 CAN interfaces supply voltage 6-32 VDC The high-performance

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T

LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T LV22RFSTKLB A2 B2 A1 B1 P LV22RFSTKABW FEATURES: O RING PORTS to eliminate leakage. FOURTH POSITION REGEN allows cylinder to rapidly extend. POWER

More information

HFX48m Programmable Controller. Programmed with Eaton Pro-FX control software

HFX48m Programmable Controller. Programmed with Eaton Pro-FX control software HFX48m Programmable Controller Part number: 102EC21700A Programmed with Eaton Pro-FX control software 32-bit processor, 48 I/O (24 inputs & 24 outputs), 3 CAN interfaces supply voltage 6-32 VDC The high-performance

More information

PVH131/141 Variable Displacement Piston Pump - 11 Design

PVH131/141 Variable Displacement Piston Pump - 11 Design Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque

More information

V Series AXIAL PISTON PUMP ORDER CODE

V Series AXIAL PISTON PUMP ORDER CODE V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 10 D X A 1001 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Max. Displacement (cm 3 /n): 15, 18, 23,

More information

Hydraulic Pressure Control Valves

Hydraulic Pressure Control Valves Webtec Products Limited Hydraulic Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. RV 020 Direct In-Line Relief Valve 1 RV 025 Relief Valve 3 RV 050 Relief

More information

PROPORTIONAL PRESSURE CONTROL VALVES AND SYSTEMS.

PROPORTIONAL PRESSURE CONTROL VALVES AND SYSTEMS. PROPORTIONAL PRESSURE CONTROL VALVES AND SYSTEMS www.elwood.com 9 0 0 1 : 2 0 0 0 C E R T I F I E D C O M P A N Y Proportional Pressure Control Valves The Elwood Proportional Pressure Control Valves are

More information

Series PVP Variable Volume, Piston Pumps

Series PVP Variable Volume, Piston Pumps Variable Volume, Piston Pumps Catalog 2600-102/USA Introduction Quick Reference Data Chart Pump Model Displacement cc/rev (In 3 /rev) Pump Delivery *Approx. Noise Levels db(a) Horsepower At Pressure @

More information

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.

Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1. Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 50 bar (5000 psi) and 7 L/min (60 USgpm) n Eaton rand ETON Screw-In Cartridge Valves E-VLSC-MC00-E November 009 -.

More information

ROTARY GEAR FLOW DIVIDERS

ROTARY GEAR FLOW DIVIDERS ROTARY GEAR FLOW DIVIDERS Concentric AB Innovation + Technology = Sustainability GC and D Series Rotary Gear Flow Dividers Intensifier - Combiner (European and U.S. Versions) Field-proven Concentric Hydraulic

More information

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE NFPA D03 MOUNTING INTERFACE ISO 4401-03-02-0-94 (CETOP 4.2-4-03-250) SUBPLATE MOUNTING NFPA D03 ISO 4401-03 (CETOP 03) NG6 Pressure max 4060

More information

VHO/VQ Single, Double & Triple Vane Pumps

VHO/VQ Single, Double & Triple Vane Pumps VHO/VQ Single, Double & Triple Vane Pumps Series Available: 20, 25, 30, 35, 45, 50 For Mobile and Industrial Use Cartridge Kits Available for All Sizes Same Day Shipments www.fluidynefp.com Our People

More information

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51 83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

Basic Symbols. Lines. Circular. Square. Diamond. Miscellaneous Symbols. -continuous line - flow line. -dashed line - pilot, drain

Basic Symbols. Lines. Circular. Square. Diamond. Miscellaneous Symbols. -continuous line - flow line. -dashed line - pilot, drain Airline Hydraulic's Main Page Basic Symbols Lines continuous line flow line dashed line pilot, drain envelope long and short dashes around two or more component symbols. Circular Square Diamond large circle

More information

Vickers Hydraulic Pump on Boeing 747-8, and 777 Aircraft. P/N (Model PV D)

Vickers Hydraulic Pump on Boeing 747-8, and 777 Aircraft. P/N (Model PV D) Vickers Hydraulic Pump on Boeing 747-8, 747-400 and 777 Aircraft P/N 972952 (Model PV3-300-16D) Eaton's Vickers Hydraulic Pump on Boeing 747-8, 747-400 and 777 Aircraft P/N 972952 (Model PV3-300-16D)

More information

Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)

Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where

More information

Pressure Relief and Regulating Valves

Pressure Relief and Regulating Valves Pressure Relief and Regulating Valves With blocked center directional valves and variable displacement pumps, or open center directional valves and fixed displacement pumps where fast response, low leakage

More information

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Check Valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 7 L/min (60 USgpm) EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E4 September, 007 - Check

More information

Hydraulic Pump/Motor Division. John Duba Product Manager Piston Pumps. Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division. John Duba Product Manager Piston Pumps. Hydraulic Pump/Motor Division John Duba Product Manager Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

COUNTERBALANCE VALVES

COUNTERBALANCE VALVES COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load

More information

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653)

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) SPECIFICATIONS AND PARTS Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) Serial Codes GDV and GDL Read and understand all of the instructions and safety information in this manual before

More information

Coreless Spin-on Filters

Coreless Spin-on Filters The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency,

More information

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................

More information

Load-sensing control block in mono and sandwich plate design

Load-sensing control block in mono and sandwich plate design Load-sensing control block in mono and sandwich plate design RE 64276/08.2010 Replaces: 08.2008 1/64 Type M4-12 Nominal size 12 Unit series 2X Nominal pressure 350 bar (pump side) Nominal pressure 420

More information

Schematic Symbols Chart (Design Hydraulic and Pneumatic circits)

Schematic Symbols Chart (Design Hydraulic and Pneumatic circits) Page 1 of 6 (Home) Symbols / Visit us on: Fluid Power, Automation and Motion Control for all Industries About Us Products Services Catalogs Place an Order Training & Information Contact Us Employee Access

More information

Directional Control Valve Equipment for Front End Loaders

Directional Control Valve Equipment for Front End Loaders Directional Control Valve Equipment for Front End Loaders CONTENT nimco Page 3 General Information Page 4 Page 5 Page 7 Page 11 Page 12 Technical Data Application Example System Options Quickview Flow

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control

More information

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................

More information

Check Valves Valve locator

Check Valves Valve locator Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()

More information

"A" Series Variable Displacement Piston Pumps Single Pump, "OBE" Type Electro-Hydraulic Proportional Pressure & Flow Control Type

A Series Variable Displacement Piston Pumps Single Pump, OBE Type Electro-Hydraulic Proportional Pressure & Flow Control Type Single Pump, "OBE" Type Electro-Hydraulic Proportional & Flow Type Input Signal for Safety valve Input Signal for Flow Amplifier Proportional Solenoid Sensor Valve Piston (S Input Voltage L) Performance

More information

FLUID POWER GRAPHIC SYMBOLS

FLUID POWER GRAPHIC SYMBOLS FLUID POWER GRAPHIC SYMBOLS ANSI Y32.10 GRAPHIC SYMBOLS 1. Introduction 1.1 General Fluid power systems are those that transmit and control power through use of a pressurized fluid (liquid or gas) within

More information

GTP10 & GTP12 - Apex Electric Dispensing and Transfer Pumps for Fuel, Diesel, Oil and Anti-freeze

GTP10 & GTP12 - Apex Electric Dispensing and Transfer Pumps for Fuel, Diesel, Oil and Anti-freeze GTP10 & GTP12 - Apex Electric Dispensing and Transfer Pumps for Fuel, Diesel, Oil and Anti-freeze Durable Pumping Solutions for Fluid Transfer Applications For fuel, diesel, oil and anti-freeze Heavy-duty

More information

The Aerial Lift Industry

The Aerial Lift Industry System Solutions For The Aerial Lift Industry Your Resource For Motion Control Components, Systems and Solutions The Aerial Lift Industry: A Focus Parker means components, systems and partnerships that

More information

Technical Memo. Theory Of Operation OVERVIEW ACTUATOR

Technical Memo. Theory Of Operation OVERVIEW ACTUATOR Electraulic Actuators & Drives Theory Of Operation Technical Memo REXA 4 Manley Street W. Bridgewater, MA 02379 Tel: 508.584.1199 Fax: 508.584.2525 OVERVIEW The REXA Xpac is a microprocessor controlled,

More information

Hose Assembly Systems. Product Focus

Hose Assembly Systems. Product Focus Hose Assembly Systems Product Focus In the SHOP or In the FIELD... Save money in time and labor. Make your own OEM-quality custom hose assemblies with a Weatherhead Coll-O-Crimp system. Weatherhead hose

More information

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow 2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description

More information

YOUR HYDRAULIC SOLUTION CENTRE

YOUR HYDRAULIC SOLUTION CENTRE HYDRAULIC SYSTEMS & COMPONENTS YOUR HYDRAULIC SOLUTION CENTRE 2013 Catalogue Service System Design Component Supply Importers & Distributors 38 Parkhouse Road, PO Box 3892 Christchurch Fax (03) 348 1675

More information

Commercial Shearing (Pty) Ltd P3-P11-P17

Commercial Shearing (Pty) Ltd P3-P11-P17 Commercial Shearing (Pty) Ltd P3-P11-P17 HYDRAULIC PUMPS P3 HYDRAULIC PUMPS Superior Performance. High Efficiency. High Pressure Operation. The Advantage At One Glance UP TO 4000 PSI/276 BAR CONTINUOUS

More information

Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage

Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load

More information

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits with housing and distributor cover in aluminium. The displacement is continuously variable by means

More information

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93 Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct

More information

Hydraulic Flow Control Valves

Hydraulic Flow Control Valves Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series

More information

PART 2 FORKLIFT HYDRAULIC SYSTEM

PART 2 FORKLIFT HYDRAULIC SYSTEM PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity

More information

INSTRUCTION MANUAL FOR THE MODIFICATION OF EXISTING SYSTEMS DIRECTIVE 95/16/EC

INSTRUCTION MANUAL FOR THE MODIFICATION OF EXISTING SYSTEMS DIRECTIVE 95/16/EC 1 Compiled by: H.L./ G. Galparoli Date: 29/03/99 No.: M.00.003 HYDRONIC LIFT Issue: Rev B 18.12.2006 Changed by: Product code: No of pages: 8 File:PM229GMV-en.doc Approved by: Drawing no: Language: EN

More information

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011 Pilot Operated Cartridge Check Valves RJV-05 HA 5 8/0 Size 05 50 bar (600 PSI) 0 L/min (5. GPM) Replaces HA 5 0/0 Cartridge valve for manifold mounting and with subplate with subplate - enables direct

More information

Pump Delivery ( 7 bar ) 100 PSI

Pump Delivery ( 7 bar ) 100 PSI V Axial Piston Pump V V Series Axial Piston Pump 1. Combining special internal designs and strict engineering disciplines has reduced noise level to new lows in whole pressure zones. DR UT IN nominal pressure

More information

1.Booklet. Hydraulic Motors. General Purpose MotorsR Series

1.Booklet. Hydraulic Motors. General Purpose MotorsR Series .Booklet 1.Booklet Hydraulic Motors out 2 out 1.Booklet R Geroler Element... 11 Displacements... [15] ** 75 [20] * Speed... Up to 10 RPM Pressure Bar [PSI]... 125 [1800] Cont. 165 [2400] Inter. Torque

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

Innovative solutions that solve the world s toughest challenges.

Innovative solutions that solve the world s toughest challenges. Mobile and Industrial Hydraulic Power Solutions Introducing Eaton s Hydraulics Group. Innovative solutions that solve the world s toughest challenges. TM Industry leadership and innovation that empower

More information

TMT Orbital motor. Service and Parts Manual

TMT Orbital motor. Service and Parts Manual TMT Orbital motor Service and Parts Manual Table of contens, Special versions CONTENTS Page Service shops...3 Exploded view TMT...4 Spare parts list...5 Tools...7 Dismantling...8 SPECIAL VERSIONS The list

More information

Scavenging and Pressure Relief Valve Block SDVB

Scavenging and Pressure Relief Valve Block SDVB Brueninghaus Hydromatik Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S Service Data Vickers Vane Pumps Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released 08 01 95 M 2497 S 10 SAE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin Bolt

More information

H1 Motor Electric Proportional Control M1, M2, K1, K2

H1 Motor Electric Proportional Control M1, M2, K1, K2 MAKING MODERN LIVING POSSIBLE Electrical Installation H1 Motor Electric Proportional Control M1, M2, K1, K2 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev September 2015

More information

Pilot Operated Pressure Relief Valves Series R4V / R6V

Pilot Operated Pressure Relief Valves Series R4V / R6V Characteristics Series RV / R6V Pilot operated pressure relief valves series RV (DIN 230 Form D) and R6V (DIN 230 Form E) consist of a manually adjusted pilot stage and a seated type main stage. A vent

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves Solenoid Operated Directional Valves Applications Solenoid operated valves differ from manually and hydraulically pilot-operated valves in that they are electrically controlled as opposed to using complex

More information

S590 SKID-STEER LOADER SPECIFICATIONS

S590 SKID-STEER LOADER SPECIFICATIONS Loader Dimensions S590 SKID-STEER LOADER SPECIFICATIONS Dimensions are given for loader equipped with standard tires and 68 in. Construction and Industrial bucket and may vary with other bucket types.

More information

Axial piston pumps type PVPC

Axial piston pumps type PVPC Atos spa 21018 Sesto Calende, Italy Fax 0331 920005 Table A1605/E Axial piston pumps type PVPC variable displacement, high pressure operation; with hydraulic or electrohydraulic controls PVPCSLE4046 PVPC

More information

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

More information

Vickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96

Vickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96 Vickers Valves CM2, CM11, RM3 & FM3 Control Valves For Mobile Equipment Revised 4/96 33 Introduction The directional valves described in this booklet are more than just directional valves -- they are hydraulic

More information

C081 Variable Displacement Axial Piston Pump Service Information

C081 Variable Displacement Axial Piston Pump Service Information C081 Variable Displacement Axial Piston Pump Service Information HY28-2687-02/C/US October 2014 HY28-2686-01/C/US Contents Contents Installation Information...2 Unit Identification...4 Model Codes...5

More information

Displacements cm 3 /r [in 3 /r] Design code -002 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Char-Lynn HP30 Motor

Displacements cm 3 /r [in 3 /r] Design code -002 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Char-Lynn HP30 Motor Char-Lynn HP30 Motor Design code -002 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for Performance For the past 55 years, Char-Lynn has been recognized

More information

HIGH PRESSURE GEAR PUMP W1500

HIGH PRESSURE GEAR PUMP W1500 HIGH PRESSURE GEAR PUMP W1500 HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide THE POWER OF THE W1500 A SERIES Haldex Hydraulics is one of the world s leading

More information

HPV Closed Loop Pump Data and Specifications

HPV Closed Loop Pump Data and Specifications Data and Specifications Specifications cm 3 /rev in 3 /rev Pressure Ratings Rated Speed Max Disp Rated Speed Min Disp Envelope Size: Length Width Height Weight HP Rating Count HPV 55 55 3.35 HPV 75 75

More information

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports

More information

UNDERSTANDING SCHEMATICS. Introduction

UNDERSTANDING SCHEMATICS. Introduction UNDERSTANDING SCHEMATICS Introduction When hydraulic systems are designed, whether on paper or computer, the layout of the system is expressed in what is called a schematic. A schematic is a line drawing

More information

Illustrated Parts List to

Illustrated Parts List to Illustrated Parts List Model Series 245400 to 245499 TYPE NUMBERS 0035 through 0090, 0121 through 0128, 0235 through 0299, 0519 through 0555. FORM MS 1093 3C 7/2001 REPLACES FORM MS 1093 12/99 FILE IN

More information

Variable displacement axial piston pump type V30Z

Variable displacement axial piston pump type V30Z Variable displacement axial piston pump type V30Z Twin pump (back-to-back) for open circuit Operating pressure p max Displacement V max = 420 bar (6000 psi) = 2x115 ccm/rev See also: Variable displacement

More information

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES CONTINENTAL HYDRAULICS PR*SP - PR*SPU PILOT OPERATED PRESSURE RELIEF VALVE SERIES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM POWERFUL PR*SP - PR*SPU

More information

D.C. Hydraulic Power Systems

D.C. Hydraulic Power Systems D.C. Hydraulic Power Systems Compact designs, integrated and manifold valve circuits Reference: 500-P-000001-EN-02 Issue: 09.2015 1/96 Contents Page 1 General information... 5 1.1 Introduction... 5 1.2

More information

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03. Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power

More information

2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7

2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7 Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables

More information

Boxer 320 Parts Manual. Part No Serial No.s 1518 & Higher

Boxer 320 Parts Manual. Part No Serial No.s 1518 & Higher Boxer 0 Parts Manual Part No. - Serial No.s & Higher Table of Contents Parts List and Illustrations Page Number Routine Maintenance Replacement Parts...iv Universal Mounting Plate and Loader Arm... Loader

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive

More information

IFP A10VSO VARIABLE AXIAL PISTON PUMPS. Available sizes: NOMINAL PRESSURE 4000 psi [280 bar] PEAK PRESSURE 5100 psi [350 bar] FEATURES SECTIONAL VIEW

IFP A10VSO VARIABLE AXIAL PISTON PUMPS. Available sizes: NOMINAL PRESSURE 4000 psi [280 bar] PEAK PRESSURE 5100 psi [350 bar] FEATURES SECTIONAL VIEW IFP A10VSO VARIABLE AXIAL PISTON PUMPS Available sizes: 18 1.10 in3/rev [18 cm3/rev] 28 1.71 in3/rev [28 cm3/rev] 45 2.75 in3/rev [45 cm3/rev] 71 4.33 in3/rev [71 cm3/rev] 100 6.10 in3/rev [100 cm3/rev]

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

HPV SERIES AXIAL PISTON PUMPS

HPV SERIES AXIAL PISTON PUMPS INDEX COMPENSATED VOLUMETRIC THEORETICAL FLOW@ MODEL MAXIMUM CONTINUOUS FLANGE PAGES DISPLACEMENT 17 RPM SERIES MOUNTING.88 CU. IN./REV. 6.67 GPM HPV-6B35 30 PSI SAE A 2-BOLT* 9-15 1.26 CU. IN./REV. 9.55

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information