Schaffner Instrument. Products and Services

Transcription

1 Sensorer Overspennings- Monitorer Miljøtest Måle- Products and Services Accessories Pre-Amplifiers 9kHz - 3GHz CPA 9231A / 9232 RFP 4001A / 4002 Attenuators ATN Series - ATN 6010 / 25 / 50 / 75 RF Pulse Modulator CPM 9830 Transient Limiter CFL 9206 Tripods, Antenna Adapters and Mountings Antenna Adapters and Cables Amplifiers Power Amplifier 0.8MHz - 3GHz 75 W CBA 9429 Power Amplifier 150kHz - 230MHz 20W CBA 9424 Power Amplifier 150kHz - 230MHz 30W CBA 9425 Power Amplifier 150kHz - 1GHz 15W CBA 9477B Power Amplifier MHz 50W CBA 9426 Power Amplifier MHz 100W CBA 9413B Power Amplifier MHz 200W CBA 9433 Power Amplifier 1-400MHz 100W CBA 9423 Analysers Discontinuous Interference Analyser DIA 1512D Antennas The BiLog - An Classic BiLog Antenna 30MHz - 1GHz CBL 6111C BiLog Antenna 30MHz - 2GHz CBL 6112B HF Loop Antenna 9kHz - 30MHz HLA 6120 Large Loop Antenna 9kHz - 30MHz LLA 6142 Log Periodic Antennas 200MHz - 1GHz UPA 6108 / 6109 Dipole Antennas 30MHz - 1GHz VDA 6116A / UHA 9105 Biconical Antenna 30MHz - 300MHz VBA 6106A X-Wing BiLog Antenna 26MHz - 2GHz CBL 6140A Compact X-Wing BiLog Antenna 30MHz - 2GHz CBL 6141A X-Wing BiLog Antenna 30MHz - 3GHz CBL 6143 X-Wing BiLog Antenna 25MHz - 3GHz CBL 6144 High Power Broadband Biconical Antenna VHBA 9123 Log Periodic Antennas 200MHz - 1GHz UPA 6108 / 6109 Compact Biconical Antenna 300MHz - 1GHz DPA 4000 Broadband Standard Reference Dipole System 30MHz - 1GHz BSRD 6500 series Balanced Calibration Set BCS 1000 Clamps Capacitive Coupling Clamp CDN 500 Capacitive Coupling Clamps CDN 8014 / 8015 Immunity Injection Clamp KEMZ 801 RF Attenuation Clamp KEMA 801 Absorbing Clamp AMZ 41 Couplers High Energy Pulse Generator / High Current Coupler NSG 5005 / CDN 5010 Directional Couplers CHA 9652B / DCP

2 Sensorer Products and Services Generators Fast Transient Burst Generator NSG 2025 Pulse Generators NSG 5001A / 5003 Burst Generator NSG 3025 Reference Spectrum Generator 1MHz - 1GHz RSG 1000 Probes Current Injection Probe 10kHz - 400MHz CIP 9136 Injection Probes / Current Injection Probes CIP Series - CIP 36A / 37A Wideband Field Probe 100kHz - 3GHz 20 Wideband Field Probe 100kHz - 18GHz 200 Current Sensing Probe SMZ 11 Capacitive Voltage Probe CVP 2200 Emission / Immunity Sensing Probe CSP 9160 Near Field Probe Set NFPS1 Networks Line Coupling Network / Telecom Line Coupling Network CDN 117 / 118 Pulse Coupling Networks CDN 131 / 133 / 135 Coupling / Decoupling Networks CDN Line Impedance Stabilisation Networks LISNs Impedance Stabilisation Networks ISN RF Switch Networks RFSN Recievers EMI Measuring Receivers 9kHz 18GHz SCR 3501 / 3502/ SMR 4518 Software Radiated and Conducted Immunity Software Compliance 3 Enhanced Emission Measurement Software Compliance 3 Test Environments Compact Semi-Anechoic Test Chambers Impact Test Environment GTEM Test Cells and Chambers RF Immunity Test Cell 100kHz - 2GHz emcell Test Environment DTEM Cell Micro-TEM Cell MTC 1000 Tri Plate Line 10kHz - 1GHz TPL 3000 Noise / Radiation Sources Test References and Verification Tools Broadband Noise Source 150kHz - 2GHz CNE 6500B Comparison Noise Emitter CNE 6507 Spherical Reference Radiation Source 30MHz - 1GHz KSQ 1000 Reference Radiation Source 30MHz - 1GHz VSQ 1000 Reference Radiation Source 1-18GHz VSQ 2000 Transfer Fieldstrength Measuring System TFS 1100 / 1101 Overspennings- Måle- Monitorer Miljøtest

3 Sensorer Overspennings- Products and Services Test Systems ProfLine Immunity Systems Product Standards and Schaffner Solutions Table European and International Standards Table ProfLine Test Systems Main Frame System Chassis NSG 5000 Harmonics, Flicker and Power Quality Test System ProfLine 2100 Modular Test System System 2050 Battery Simulator NSG 5004A RF Immunity Test Systems ProfLine 4000 RF Emission Test Systems ProfLine 6000 Emission Test Packages 9kHz GHz Emipak Plus Conducted Immunity Tests Compact Conducted Immunity Test Systems Bestplus / Bestemc ESD Simulator System NSG 438 ESD Simulator System NSG 435 RF Conducted and Radiated Systems Potential-less Measuring and Transmitting System EFS IEC Test System NSG 2070 Automotive RF Test System ProfLine 5100 Automotive Conducted Test System System 5000 Telecommunications Line, Test Components CISPR22 Monitorer Miljøtest Måle- Cal Shop UKAS - An Calibration Services OATS and Chamber Calibration Calibration Services for EMI Pulse Generators Probe Calibration and Testing Service Calibration Services for EMI Pulse Generators Safety Service Testing Product Testing for Testing Services Technical Construction File Service Training Seminars United Kingdom Worldwide Germany Germany Switzerland Switzerland TCF

4 Sensorer ProfLine Test Systems One supplier for ALL test requirements Complete turnkey systems Fully compliant to international standards Fast return on investment Introduction Meeting today's compliance requirements is an extensive and complex task. There are numerous standards and requirements depending upon product, application and territory. Most manufacturers and test laboratories do not have the resources to define a complex test system to meet their needs. This leads to considerable risk when selecting and constructing an test laboratory. For every application, there is a complex trade-off between maximising the number of standards that can be complied with, minimising measurement uncertainty and minimising expenditure. Schaffner offers an test solution to meet the needs of every application with guaranteed results and minimum expenditure. Schaffner analyses every aspect of the test process, not just supplying the equipment but also training your staff, not only to use the equipment but also to generate test procedures, obtain accreditation and the subsequent maintenance of the accreditation thus minimising running costs. The diagram (right) shows the Schaffner consultancy approach to test solutions. The important benefit is that the process is an ongoing partnership that achieves a high degree of customer confidence and competence whilst minimising the initial and ongoing costs. Why Schaffner? Schaffner is unique in that it manufactures every aspect of test technology and supplies fully automated and supported systems. Schaffner operates its own accredited test and calibration laboratories testing third party customers' products, so fully understanding the needs of its customers. The Scope of Test Systems For every aspect of testing, Schaffner manufactures a fully automatic system solution giving fast test times, accurate measurements and low running costs. Overspennings- Måle- Monitorer Miljøtest

5 Sensorer Overspennings- ProfLine Test Systems Monitorer Miljøtest Måle

6 Sensorer Product Standards and Schaffner Solutions Overspennings- Måle- Miljøtest Monitorer

7 Sensorer Overspennings- Monitorer Miljøtest Måle- European and International Standards A selection of som of the European and International standards in common use Standard Scope Commercial & al EN Generic emission standard: Residential, commercial and light industrial environment EN Generic emission standard: al environment EN Generic Immunity standard: Residential, commercial and light industrial environment EN Generic Immunity standard: al environment EN (IEC ) New generic Immunity standard: al environment EN (IEC ) Basic emission standard: Harmonic currents EN (IEC ) Basic emission standard: Voltage fluctuations and flicker EN (IEC ) Basic Immunity standard: Electro-static discharge EN (IEC ) Basic immunity standard: Radiated RF field EN (IEC ) Basic Immunity standard: Electrical fast burst transients EN (IEC ) Basic Immunity standard: Surge EN (IEC ) Basic Immunity standard: Conducted RF EN (IEC ) Basic Immunity standard: Power frequency magnetic field (IEC ) Basic immunity standard: Pulse magnetic field EN (IEC ) Basic Immunity standard: Voltage dips, interruptions and variations (IEC ) Basic Immunity standard: Oscillatory waves IEC Basic Immunity standard: Low frequency common mode 0Hz to 150kHz EN Product standard: Uninterruptible power systems EN Product family Immunity standard: Components for Fire, intruder and social alarm systems EN50199 Product standard: Arc welding equipment EN55011 Product family emission standard: al Scientific and Medical (ISM) radio frequency equipment EN55013 Product family emission standard: Broadcast receivers and associated equipment EN Product family emission standard: Household appliances electric tools and similar EN Product family immunity standard: Household appliances electric tools and similar EN55015 Product family emission standard: General lighting equipment EN55020 Product family Immunity standard: Broadcast receivers and associated equipment EN55022 Product family emission standard: Information technology equipment EN55024 Product family Immunity standard: Information technology equipment EN Product family emission standard: Professional audio-visual and entertainment lighting control equipment EN Product family Immunity standard: Professional audio-visual and entertainment lighting control equipment EN61547 Product family Immunity standard: General lighting equipment EN Product standard: Adjustable speed electrical power drive systems EN61326 (IEC 61326) Product family standard: Equipment for measurement, control and laboratory use Standard Scope Automotive CISPR 25 Vehicle and component RF emission tests ISO Vehicle RF immunity tests ISO Component RF immunity tests SAE J1113 Component RF immunity tests ISO Component conducted electrical transient emission and immunity intended for vehicles with a nominal 12 volt supply ISO Component conducted electrical transient emission and immunity intended for vehicles with a nominal 24 volt supply 84/95/EEC European directive on in road vehicles Standard Scope Telecom Bellcore FCC ETSI and Electrical safety - generic criteria for network telecom equipment Connection of terminal equipment to the telephone network for telecommunications equipment

8 Sensorer ProfLine Test Systems Commercial, industrial, medical Telecom, mobile radio Automotive Military/ aerospace System 2050 Conducted Immunity A complete system for generating high voltage impulses for conducted immunity. This modular system offers single port testing to the EUT in either single or three phase modes with a wide selection of optional plug-in modules for commercial, industrial and telecom testing. ProfLine 2100 Powerline, Emission & Immunity The system for testing power line emissions and immunity from harmonics and voltage fluctuations. Single or three phase testing through a single EUT port. Options are available for magnetic field immunity. ProfLine 4000 RF Immunity A range of RF immunity systems for both conducted and radiated. The systems are designed for low distortion and high performance. The performance is matched to that of the transducer giving RF power where it is needed and saving on cost where it is not. System 5000 Automotive Conducted Immunity Flexible modular system for testing to ISO and SAE standards. Inhouse standards can be met by using Schaffner s extensive range of system plug-in modules. ProfLine 5100 Automotive RF Immunity Complete packages for testing to ISO and SAE standards or automotive manufacturers standards are available. Custom packages are generated according to customers needs. Profline 6000 RF Emission A series of compliant systems for the measurement of radiated and conducted RF emissions from development to full compliance test setups. Particular emphasis is given to accuracy and repeatability with extensive report writing software. System Software Application Software Schaffner writes its own test and reporting software and has complete control of the upgrade process. Considerable attention is given to support with a market leading software help-line and support web-site. Test Environment Test Chambers, Cells & GTEM Schaffner can provide, install and certify a range of test environments. This could be as simple as a small screened room, a fully compliant open area test site (OATS) or a full anechoic chamber. *Military / Aerospace Systems Custom specific solutions can be supplied for MIL standard and aerospace testing. Please refer to separate literature. Test House Consultancy From start-up to accreditation and beyond. A total turnkey package to provide all necessary procedures and test methods required for specific customer applications including: Specification of equipment and systems Supply of procedures to standards required Chamber, site and equipment calibration Accreditation preparation, support and maintenance Training Training Schaffner considers training as the most important part of any compliance programme. From initial on-site equipment training to specialised programmes that guide the customer to full accreditation, the Schaffner contribution for training is the most extensive and respected in the industry. Monitorer Miljøtest Overspennings- Måle

9 Sensorer Overspennings- General on Conducted Immunity Tests immunity tests are primarily required by international regulations and are specified in relevant technical standards. Product standards need equipment and systems to be immune to predetermined limits of electromagnetic interference; the test methods employed being set down by international technical committees. The standards set by the IEC, ANSI-IEEE, VDE, etc, cover products of every description from humble household appliances, through office automation equipment up to heavy industrial applications. Additional regulations drawn up by standards groups such as the ITU, FCC, Bellcore and ETSI, apply to telecommunications devices that are to be operated on public networks. Special test requirements apply in the aeronautics, military and automotive product fields. Test specifications for vehicle components are influenced by many manufacturers own in-house standards that augment the basic standards set by the ISO, SAE, DIN, ASAE, etc. Through many years of active collaboration on and for these standards committees, Schaffner is in an enviable position to be in the vanguard of providing the most advanced test systems. Schaffner products offer more than simple compliance to the relevant standard. Price-optimized and practical features ensure efficient testing. User-friendliness and benefits to the engineer are essential elements of all Schaffner products. Application-orientated Concepts A broad range of instruments and accessories ensures optimal suitability for each particular application field; laboratories Development-tracking testing Certification On-site applications on systems Interference searches Product qualification and quality assurance Production monitoring Flexibility and expandability is assured in all cases. Monitorer Miljøtest Måle

10 Sensorer General on Conducted Immunity Tests System Software Professional test software is the key to time saving and quality assurance in the test department. In-house software development by our own experts has resulted in user-friendly application packages that are mutually compatible and present a unified appearance to the user. Standardconformance test parameters are preprogrammed and can easily be called up from memory to execute a compliance test reliably. A generic sequencer communicates with all the items of equipment present in a test rig to facilitate the automation of test procedures over the entire test spectrum. Test Documentation Meaningful reports are necessary to accompany certification, for product files and for quality assurance purposes. The test software produces readydesigned report forms containing all the relevant details of the test parameters together with the results obtained during each test procedure. If necessary, the data can be exported and individual test reports produced. The user benefits from Schaffner s experience with customer measurements in terms of considerable time savings in test administration. Calibration Service Schaffner operates a number of calibration laboratories within the group, accredited by UKAS and SCS in accordance with international standards, for the periodic, traceable recalibration of test equipment. The experience gained through exercising this calibration competence flows back directly into the development of new test equipment. Our customers are, therefore, assured of support by a competent partner under all circumstances. Flexibility and Investment Protection Schaffner systems are based on the concept of modularity, expandability and value retention. Generators can be upgraded for new standards and toughened requirements can be met through the seamless expandability of the existing system. The long-term nature of customer investment is assured by the upward compatibility of Schaffner equipment. Safety tests are mostly carried out at high voltages that are quite often associated with high energy levels which, without particular safety measures being taken, represent a potential danger. Schaffner products are always over specified on matters relating to safety. The use of carefully selected components and connectors, as well as ingenious safety circuits that continue to work in combination with one another, result in an exceptional standard of safety and peace of mind. Accessories The know-how stemming from our own test laboratories is available to our customers through our sales organization and has a profound influence on the range of practically tested accessories with which safe, standard-conformance tests can be executed in an efficient and time saving manner. Overspennings- Måle- Monitorer Miljøtest