CATALOGUE OF HOOKLOADERS & SKIPLOADERS
|
|
|
- Rosamond Berniece Rich
- 7 years ago
- Views:
Transcription
1 & SKIPLOADERS version 7.11/2011 only DIN standards CTS-servis, a. s. Okřínek Poděbrady CZ tel. : fax : info@cts-servis.cz version 7.1/2011 1
2 http : // Information : Some options may be incompatible with certain types of container systems or trucks. All measurements, weights, capacities, etc. as described in our documentation are not binding for delivery and subject to change without notice. Technical information stated verbally shall not be binding. Only written quotations and written order confirmations, signed by an authorized person shall be endorsed as binding. General sales and delivery conditions CTSservis, a. s. are applicable to all offers. Hydraulic distributors are fitted on the outer side of the auxiliary frame by default, yet for types K-DIN, K-C.H.E.M., 03/05-32-K-CTS there is another possibility of placing distributors inside of the auxiliary frames of mechanisms. There are all presently available versions in the specifications (both basic and options). If there is not required finish please contact CTS-servis, a. s. Okřínek version 7.1/2011 2
3 CITY LINE -knuckle models Capacity 2,5 5 ton version 7.1/2011 3
4 ARTICULATED HOOKLOADER K : 25 kn CTS K-DIN : H= 900 CH= 900 Capacity class of the hookloader : 25 kn Capacity class of the undercarriage (total weight) : 3,5 8 tons Specifications : TYPE Supply K-DIN Lifting and tipping capacity (t) 2,5 Maximal pressure (MPa) 25 H (mm) 900 X2 (mm) 640 O (mm) 153 L (mm) K ( ) 54 T (mm) 75 R1 (mm) 939 R2 (mm) Ds (mm) 825 System weight incl. operating fluids (kg) 405 MIN./MAX. length of the container (m) 2,5 / 2,9 ATTENTION! Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 10 lt. 17 (20) lt./min. / 28 MPa version 7.1/2011 4
5 ARTICULATED HOOKLOADER K : 25 kn CTS K-DIN : Equipment of the hookloader Capacity class of the hookloader : 25 kn Capacity class of the undercarriage (total weight) : 3,5 8 tons 1. BASIC EQUIPMENT Hydraulic distributor /3, 12V; Control (electric) /3-K, 12V; Hydraulic distributor /3, 24V; Control (electric) /3-K, 24V; Hydraulic container locking CTS 03-2x outside : (containers according to DIN ) - audible alarm with unlocked container; - blocking of tipping with unlocked container; - blocking of hydraulic container locking with tipping; - blocking of articulated mast with locked container; Hydraulic container locking CTS 03-2x inside : (containers according to DIN ) - audible alarm with unlocked container; - blocking of tipping with unlocked container; - blocking of hydraulic container locking with tipping; - blocking of articulated mast with locked container; 2. OPTIONS Additional container locking CTS 03-2x-B. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/2011 5
6 ARTICULATED HOOKLOADER K : 30 kn CTS K-DIN : H= 900 CH= 900 Capacity class of the hookloader : 30 kn Capacity class of the undercarriage (total weight) : 3,5 8 tons Specifications : TYPE Supply K-DIN _860-K-DIN Lifting and tipping capacity (t) 3 3 Maximal pressure (MPa) H (mm) X2 (mm) O (mm) L (mm) K ( ) T (mm) R1 (mm) R2 (mm) Ds (mm) System weight incl. operating fluids (kg) MIN./MAX. length of the container (m) 3,2 / 3,4 3,2 / 3,4 ATTENTION! Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 10 lt. 17 (20) lt./min. / 28 MPa version 7.1/2011 6
7 ARTICULATED HOOKLOADER K : 30 kn CTS K-DIN : Equipment of the hookloader Capacity class of the hookloader : 30 kn Capacity class of the undercarriage (total weight) : 3,5 8 tons 1. BASIC EQUIPMENT Hydraulic distributor /3, 12V; Control (electric) /3-K, 12V; Hydraulic distributor /3, 24V; Control (electric) /3-K, 24V; Hydraulic container locking CTS 03-2x outside : (containers according to DIN ) - audible alarm with unlocked container; - blocking of tipping with unlocked container; - blocking of hydraulic container locking with tipping; - blocking of articulated mast with locked container; Hydraulic container locking CTS 03-2x inside : (containers according to DIN ) - audible alarm with unlocked container; - blocking of tipping with unlocked container; - blocking of hydraulic container locking with tipping; - blocking of articulated mast with locked container; Hydraulic container locking CTS 03-2x_860 outside : (containers according to DIN ) - audible alarm with unlocked container; - blocking of tipping with unlocked container; - blocking of hydraulic container locking with tipping; blocking of articulated mast with locked container; Hydraulic container locking CTS 03-2x_860 inside : (containers according to DIN ) - audible alarm with unlocked container; - blocking of tipping with unlocked container; - blocking of hydraulic container locking with tipping; - blocking of articulated mast with locked container; 2. OPTIONS Additional container locking CTS 03-2x-B. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/2011 7
8 ARTICULATED HOOKLOADER K : 35 kn CTS K-DIN : H= 900 CH= 900 Capacity class of the hookloader : 35 kn Capacity class of the undercarriage (total weight) : 6 8 tons Specifications : TYPE Supply K-DIN Lifting and tipping capacity (t) 3,5 Maximal pressure (MPa) 28 H (mm) 900 O (mm) 180 L (mm) K ( ) 46 T (mm) 75 R1 (mm) R2 (mm) Ds (mm) 608 System weight incl. operating fluids (kg) 580 MIN./MAX. length of the container (m) L2= 3,750 L4= 1,635 ATTENTION! Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 10 lt. 17 (20) lt./min. / 28 MPa version 7.1/2011 8
9 ARTICULATED HOOKLOADER K : 35 kn CTS K-DIN : Equipment of the hookloader Capacity class of the hookloader : 35 kn Capacity class of the undercarriage (total weight) : 6 8 tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2, outside installation; Control (pneumatic) 2N; Hydraulic distributor (bowden cable) /2 *, inside installation; Control (bowden cable) 2N L=3710 mm; or Control (bowden cable) 2N L=4610 mm; or Control (bowden cable) 2N L=5110 mm; Hydraulic distributor (pneumatic) /3, outside installation; Control (pneumatic) 3N; Hydraulic distributor (bowden cable) /3 *; inside installation not together with pos. 1.22, 1.23; Control (bowden cable) 3N L=3710 mm; or Control (bowden cable) 3N L=4610 mm; or Control (bowden cable) 3N L=5110 mm; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-K, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-K, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3-K, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-K, 24V *; Mechanical locking CTS 03/05-32-K DIN : (containers according DIN ) - without signalling, without container blocking; Hydraulic container locking K DIN outside : - blocking of articulated mast; Hydraulic container locking K DIN inside : - blocking of articulated mast; 2. OPTIONS Additional container locking CTS 03/05-32-K -B Blocking of hydraulic container locking CTS 03/05-32-K, 24V : - blocking of tipping with unlocked container. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/2011 9
10 ARTICULATED HOOKLOADER K : 50 kn CTS K-DIN : H= 900 CH= 900 Capacity class of the hookloader : 50 kn Capacity class of the undercarriage (total weight) : 6 8 tons Specifications : TYPE Supply K-DIN Lifting and tipping capacity (t) 5 Maximal pressure (MPa) 28 H (mm) 900 O (mm) 150 L (mm) K ( ) 49 T (mm) 75 R1 (mm) 963 R2 (mm) Ds (mm) 855 System weight incl. operating fluids (kg) 640 MIN./MAX. length of the container (m) 3,4 ATTENTION! Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 10 lt. 17 (20) lt./min. / 28 MPa version 7.1/
11 ARTICULATED HOOKLOADER K : 50 kn CTS K-DIN : Equipment of the hookloader Capacity class of the hookloader : 50 kn Capacity class of the undercarriage (total weight) : 6 8 tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3, 24V *; Mechanical locking CTS K DIN : (containers according DIN ) - without signalling, without container blocking; Hydraulic container locking CTS 03/05-XX-K II outside : (containers according to DIN ) Hydraulic container locking CTS 03/05-XX-K II inside : (containers according to DIN ) 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS K-B. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
12 ARTICULATED HOOKLOADER K : 50 kn CTS K-DIN : H= 900 CH= 900 Capacity class of the hookloader : 50 kn Capacity class of the undercarriage (total weight) : 6 8 tons Specifications : TYPE Supply K-DIN Lifting and tipping capacity (t) 5 Maximal pressure (MPa) 28 H (mm) 900 O (mm) 180 L (mm) K ( ) 46 T (mm) 75 R1 (mm) R2 (mm) Ds (mm) 608 System weight incl. operating fluids (kg) 580 MIN./MAX. length of the container (m) L2= 3,750 L4= 1,635 ATTENTION! Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 10 lt. 17 (20) lt./min. / 28 MPa version 7.1/
13 ARTICULATED HOOKLOADER K : 50 kn CTS K-DIN : Equipment of the hookloader Capacity class of the hookloader : 50 kn Capacity class of the undercarriage (total weight) : 6 8 tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2, outside installation; Control (pneumatic) 2N; Hydraulic distributor (bowden cable) /2 *, inside installation; Control (bowden cable) 2N L=3710 mm; or Control (bowden cable) 2N L=4610 mm; or Control (bowden cable) 2N L=5110 mm; Hydraulic distributor (pneumatic) /3, outside installation; Control (pneumatic) 3N; Hydraulic distributor (bowden cable) /3 *; inside installation not together with pos. 1.22, 1.23; Control (bowden cable) 3N L=3710 mm; or Control (bowden cable) 3N L=4610 mm; or Control (bowden cable) 3N L=5110 mm; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-K, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-K, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3-K, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-K, 24V *; Mechanical locking CTS 03/05-32-K DIN : (containers according DIN ) - without signalling, without container blocking; Hydraulic container locking K DIN outside : - blocking of articulated mast; Hydraulic container locking K DIN inside : - blocking of articulated mast; 2. OPTIONS Additional container locking CTS 03/05-32-K -B outside : Blocking of hydraulic container locking CTS 03/05-32-K, 24V : blocking of tipping with unlocked container. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
14 version 7.1/
15 CITY LINE -telescopic models Capacity 4 10 ton version 7.1/
16 TELESCOPIC HOOKLOADER S : 49 kn CTS PRO 04-S-DIN : H= 900 CH= 900 Capacity class of the hookloader : 49 kn Capacity class of the undercarriage (total weight) : 6 8 tons Specifications : TYPE Supply S-DIN S-DIN S-DIN Lifting and tipping capacity (t) 4,9 4,9 4,9 Maximal pressure (MPa) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) Ds (mm) System weight without operating fluids (kg) MIN./OPTIM./MAX. length of the container (m) 2,8 / 3,7-3,8 / 4,3 3,2 / 4,2-4,5 / 4,6 3,4 / 4,7 / 5,2 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 28 lt lt./min. / 28 MPa version 7.1/
17 TELESCOPIC HOOKLOADER S : 49 kn CTS PRO 04-S-DIN : Equipment of the hookloader Capacity class of the hookloader : 49 kn Capacity class of the undercarriage (total weight) : 6 8 tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-S, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3-S, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-S, 24V *; Mechanical locking I. CTS PRO-CTS/DIN, 24V PN : (containers according to DIN ) - electric blocking of container position (limit switch); Mechanical locking I. CTS PRO-CTS/DIN, 12V PN : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS PRO, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; Hydraulic container locking COMBI-LOCK CTS PRO, 12V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS PRO-B; Blocking CE STOP in-cab button Blocking of hydraulic container locking COMBI-LOCK CTS PRO, 12V : blocking of tipping with unlocked container; + blocking of hydraulic container locking with tipping Blocking of hydraulic container locking COMBI-LOCK CTS PRO, 24V : blocking of tipping with unlocked container; + blocking of hydraulic container locking with tipping. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
18 TELESCOPIC HOOKLOADER S : 60 kn CTS PRO 06-S-DIN : H= 900 CH= 900 Capacity class of the hookloader : 60 kn Capacity class of the undercarriage (total weight) : 9 12 tons Specifications : TYPE Supply S-DIN S-DIN S-DIN S-DIN Lifting and tipping capacity (t) Maximal pressure (MPa) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) Ds (mm) System weight without operating fluids (kg) MIN./OPTIM./MAX. length of the container (m) 2,8 / 3,7-3,8 / 4,3 3,2 / 4,2-4,5 / 4,6 3,4 / 4,7 / 5,2 3,6 / 5,2 / 5,5 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 40 lt lt./min. / 28 MPa version 7.1/
19 TELESCOPIC HOOKLOADER S : 60 kn CTS PRO 06-S-DIN : Equipment of the hookloader Capacity class of the hookloader : 60 kn Capacity class of the undercarriage (total weight) : 9 12 tons 1. BASIC EQUIPMENT Position Supply Description Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-S, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) 3, 12V *; (for hydraulic container locking) Control (electric) /3-S, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-S, 24V *; Mechanical locking I. CTS PRO-CTS/DIN, 24V PN : (containers according to DIN ) - electric blocking of container position (limit switch); Mechanical locking I. CTS PRO-CTS/DIN, 12V PN : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS PRO, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; Hydraulic container locking COMBI-LOCK CTS PRO, 12V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Position Supply Description Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS PRO-B; Blocking CE STOP in-cab button Blocking of hydraulic container locking COMBI-LOCK CTS PRO, 12V : blocking of tipping with unlocked container; + blocking of hydraulic container locking with tipping Blocking of hydraulic container locking COMBI-LOCK CTS PRO, 24V : blocking of tipping with unlocked container; + blocking of hydraulic container locking with tipping. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
20 TELESCOPIC HOOKLOADER S : 80 kn CTS PRO 08-S-DIN : H= 900 CH= 900 Capacity class of the hookloader : 80 kn Capacity class of the undercarriage (total weight) : tons Specifications : TYPE Supply S-DIN S-DIN S-DIN S-DIN Lifting and tipping capacity (t) Maximal pressure (MPa) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) Ds (mm) System weight without operating fluids (kg) MIN./OPTIM./MAX. length of the container (m) 2,8 / 3,7-3,8 / 4,3 3,2 / 4,2-4,5 / 4,6 3,4 / 4,7 / 5,2 3,6 / 5,2 / 5,5 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 40 lt lt./min. / 32 MPa version 7.1/
21 TELESCOPIC HOOKLOADER S : 80 kn CTS PRO 08-S-DIN : Equipment of the hookloader Capacity class of the hookloader : 80 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-S, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3-S, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-S, 24V *; Mechanical locking I. CTS PRO-CTS/DIN, 24V PN : (containers according to DIN ) - electric blocking of container position (limit switch); Mechanical locking I. CTS PRO-CTS/DIN, 12V PN : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS PRO, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; Hydraulic container locking COMBI-LOCK CTS PRO, 12V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS PRO-B; Blocking CE STOP in-cab button Blocking of hydraulic container locking COMBI-LOCK CTS PRO, 12V : blocking of tipping with unlocked container; + blocking of hydraulic container locking with tipping Blocking of hydraulic container locking COMBI-LOCK CTS PRO, 24V : blocking of tipping with unlocked container; + blocking of hydraulic container locking with tipping. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
22 TELESCOPIC HOOKLOADER S : 100 kn CTS 10-S-DIN : H= 900 CH= 900 Capacity class of the hookloader : 100 kn Capacity class of the undercarriage (total weight) : tons Specifications : TYP položka S-DIN S-DIN S-DIN S-DIN S-DIN Lifting and tipping capacity (t) Maximal pressure (MPa) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) R (mm) Ds (mm) System weight incl. operating fluids (kg) MIN./OPTIM./MAX. length of the container (m) 2,8 / 3,7 / 4,3 2,8 / 3,7 / 4,3 3,0 / 4,2 / 4,6 3,2 / 4,5 / 4,9 3,4 / 5,0 / 5,2 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 60 lt. 64 lt./min. / 28 MPa version 7.1/
23 TELESCOPIC HOOKLOADER S : 100 kn CTS 10-S-DIN : Equipment of the hookloader Capacity class of the hookloader : 100 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-S, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3-S, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-S, 24V *; Mechanical locking CTS 10-XX-S CTS/DIN : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking CTS 10-XX-S - inside : - blocking of sliding with tipping; Hydraulic container locking CTS 10-XX-S - outside : - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS 10-XX-B; Blocking CE STOP in-cab button. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
24 TELESCOPIC HOOKLOADER S : 100 kn version 7.1/
25 TELESCOPIC HOOKLOADER S : 100 kn HEAVY LINE -telescopic models (S) - telescopic + knuckle models (SK) Capacity ton version 7.1/
26 TELESCOPIC HOOKLOADER S : 100 kn CTS 10-S-DIN_1570 : H= 1570 CH= Capacity class of the hookloader : 100 kn Capacity class of the undercarriage (total weight) : tons Specifications : TYPE Supply S- DIN_ S- DIN_ S- DIN_ S- DIN_ S- DIN_ S- DIN_ S- DIN_ Lifting and tipping capacity (t) Maximal working pressure (MPa) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) R (mm) Ds (mm) System weight incl. operating fluids (kg) MIN./OPTIM./MAX. length of the container (m) 3,1 / 4,4 / 4,6 3,1 / 4,6 / 4,9 3,3 / 4,9 / 5,1 3,6 / 5,1 / 5,4 3,7 / 5,4 / 5,6 4,1 / 5,9 / 6,1 4,4 / 6,1 / 6,4 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 60 lt. 64 lt./min. / 28 MPa version 7.1/
27 TELESCOPIC HOOKLOADER S : 100 kn CTS 10-S-DIN_1570 : Equipment of the hookloader Capacity class of the hookloader : 100 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-S, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 12V *; (for hydraulic container locking) Control (electric) /3-S, 12V *; Hydraulic distributor (electric) /3, 24V *; (for hydraulic container locking) Control (electric) /3-S, 24V *; Mechanical locking CTS 10-XX-S DIN_1570 : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking CTS 10-XX-S - inside : - blocking of sliding with tipping; Hydraulic container locking CTS 10-XX-S - outside : - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS 10-XX-B; Blocking CE STOP in-cab button. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
28 TELESCOPIC HOOKLOADER S : 120 kn CTS 12-S-DIN_1570 : H= 1570 CH= Capacity class of the hookloader : 120 kn Capacity class of the undercarriage (total weight) : tons Specifications : TYPE Supply S- DIN_ S- DIN_ S- DIN_ S- DIN_ S- DIN_ S- DIN_ S- DIN_ Lifting and tipping capacity (t) Maximal working pressure (MPa) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) R (mm) Ds (mm) System weight incl. operating fluids (kg) MIN./OPTIM./MAX. length of the container (m) 3,1 / 4,4 / 4,6 3,1 / 4,6 / 4,9 3,3 / 4,9 / 5,1 3,6 / 5,1 / 5,4 3,7 / 5,4 / 5,6 4,1 / 5,9 / 6,1 4,4 / 6,1 / 6,4 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 60 lt. 64 lt./min. / 28 MPa version 7.1/
29 TELESCOPIC HOOKLOADER S : 120 kn CTS 12-S-DIN_1570 : Equipment of the hookloader Capacity class of the hookloader : 120 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 2N; Hydraulic distributor (pneumatic) /3; (for hydraulic container locking) Control (pneumatic) 3N; Hydraulic distributor (electric) /2, 12V *; Control (electric) /2-S, 12V *; Hydraulic distributor (electric) /2, 24V *; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 12V *; Control (electric) /3-S, 12V *; Hydraulic distributor (electric) /3, 24V *; Control (electric) /3-S, 24V *; Mechanical locking CTS 12-XX-S DIN_1570 : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking CTS XX-S - inside : - blocking of sliding with tipping; Hydraulic container locking CTS XX-S - outside : - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. * special terms of delivery according to the agreement (delivery time, price, etc.) version 7.1/
30 TELESCOPIC HOOKLOADER S : 140 kn CTS 14-S : H= 1 570, CH= Capacity class of the hookloader : 140 kn Capacity class of the undercarriage (total weight) : tons Specifications : Type Supply S S S S S S S S S Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.1 / / / / / / / / /6.8 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 80 lt. min. 60 lt./min. / 32,5 MPa version 7.1/
31 TELESCOPIC HOOKLOADER S : 140 kn CTS 14-S : Equipment of the hookloader Capacity class of the hookloader : 140 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+1N; Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+R+1N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /2, 24V; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-S, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-S, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-S, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
32 TELESCOPIC HOOKLOADER S : 160 kn CTS 16-S : H= 1 570, CH= Capacity class of the hookloader : 160 kn Capacity class of the undercarriage (total weight) : tons Specifications : Type Supply S S S S S S S S S Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.1 / / / / / / / / /6.8 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 80 lt. min. 60 lt./min. / 32,5 MPa version 7.1/
33 TELESCOPIC HOOKLOADER S : 160 kn CTS 16-S : Equipment of the hookloader Capacity class of the hookloader : 160 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+1N; Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+R+1N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /2, 24V; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-S, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-S, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-S, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
34 TELESCOPIC HOOKLOADER S : 200 kn CTS 20-S : H= 1 570, CH= Capacity class of the hookloader : 200 kn Capacity class of the undercarriage (total weight) : tons (3 axles) Specifications : Type Supply S S S S S S S S S S S Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.6 / / / / / / / / / / /7.6 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 100 lt. min. 80 lt./min. / 32,5 MPa version 7.1/
35 TELESCOPIC HOOKLOADER S : 200 kn CTS 20-S : Equipment of the hookloader Capacity class of the hookloader : 200 kn Capacity class of the undercarriage (total weight) : tons (3 axles) 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+1N; Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+R+1N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /2, 24V; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-S, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-S, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-S, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
36 TELESCOPIC HOOKLOADER SK : 200 kn CTS 20-SK : H= 1 570, CH= Capacity class of the hookloader : 200 kn Capacity class of the undercarriage (total weight) : tons (3 axles) Specifications : Type Supply SK SK SK SK SK SK SK SK SK Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X1 (mm) X2 (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.0 / / / / / / / / /7.6 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 100 lt. min. 80 lt./min. / 32,5 MPa version 7.1/
37 TELESCOPIC HOOKLOADER SK : 200 kn CTS 20-SK : Equipment of the hookloader Capacity class of the hookloader : 200 kn Capacity class of the undercarriage (total weight) : tons (3 axles) 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-SK, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-SK, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-SK, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
38 TELESCOPIC HOOKLOADER S : 220 kn CTS 22-S : H= 1 570, CH= Capacity class of the hookloader : 220 kn Capacity class of the undercarriage (total weight) : tons (3-4 axles) Specifications : Type Supply S S S S S S S S S S S Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.6 / / / / / / / / / / /7.6 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 100 lt. min. 80 lt./min. / 32,5 MPa version 7.1/
39 TELESCOPIC HOOKLOADER S : 220 kn CTS 22-S : Equipment of the hookloader Capacity class of the hookloader : 220 kn Capacity class of the undercarriage (total weight) : tons (3-4 axles) 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+1N; Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+R+1N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /2, 24V; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-S, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-S, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-S, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
40 TELESCOPIC HOOKLOADER SK : 220 kn CTS 22-SK : H= 1 570, CH= Capacity class of the hookloader : 220 kn Capacity class of the undercarriage (total weight) : tons (3-4 axles) Specifications : Type Supply SK SK SK SK SK SK SK SK SK Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X1 (mm) X2 (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.0 / / / / / / / / /7.6 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 100 lt. min. 80 lt./min. / 32,5 MPa version 7.1/
41 TELESCOPIC HOOKLOADER SK : 220 kn CTS 22-SK : Equipment of the hookloader Capacity class of the hookloader : 220 kn Capacity class of the undercarriage (total weight) : tons (3-4 axles) 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-SK, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-SK, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-SK, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
42 TELESCOPIC HOOKLOADER S : 260 kn CTS 26-S : H= 1 570, CH= Capacity class of the hookloader : 260 kn Capacity class of the undercarriage (total weight) : tons (4 axles) Specifications : Type Supply S S S S S S S S S S S Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.6 / / / / / / / / / / /7.6 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 100 lt. min. 80 lt./min. / 32,5 MPa version 7.1/
43 TELESCOPIC HOOKLOADER S : 260 kn CTS 26-S : Equipment of the hookloader Capacity class of the hookloader : 260 kn Capacity class of the undercarriage (total weight) : tons (4 axles) 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+1N; Hydraulic distributor (pneumatic) /2; Control (pneumatic) 1P+R+1N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /2, 24V; Control (electric) /2-S, 24V *; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-S, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-S, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-S, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
44 TELESCOPIC HOOKLOADER SK : 260 kn CTS 26-SK : H= 1 570, CH= Capacity class of the hookloader : 260 kn Capacity class of the undercarriage (total weight) : tons (4 axles) Specifications : Type Supply SK SK SK SK SK SK SK SK SK Lifting and tipping capacity (t) H (mm) O (mm) L (mm) X1 (mm) X2 (mm) K ( ) T (mm) DS (mm) System weight without operating fluids (kg) MIN. /MAX. length of the container (m) 3.0 / / / / / / / / /7.6 ATTENTION! Maximum lenght of containers with telescopic bumper only. Height of undercarriage reduces the capacity of the hookloader. H = height of the pick-up hook (mm) CH = height of the undercarriage (mm) Recommended basic volume of oil tank : Hydraulic pump recommended values : 100 lt. min. 80 lt./min. / 32,5 MPa version 7.1/
45 TELESCOPIC HOOKLOADER SK : 260 kn CTS 26-SK : Equipment of the hookloader Capacity class of the hookloader : 260 kn Capacity class of the undercarriage (total weight) : tons (4 axles) 1. BASIC EQUIPMENT Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+2N; Hydraulic distributor (pneumatic) /3; Control (pneumatic) 1P+R+2N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+3N; Hydraulic distributor (pneumatic) /4; Control (pneumatic) 1P+R+3N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+4N; Hydraulic distributor (pneumatic) /5; Control (pneumatic) 1P+R+4N; Hydraulic distributor (electric) /3, 24V; Control (electric) /3-SK, 24V *; Hydraulic distributor (electric) /4, 24V; Control (electric) /4-SK, 24V *; Hydraulic distributor (electric) /5, 24V; Control (electric) /5-SK, 24V *; Mechanical locking CTS XX, 24V : (containers according to DIN ) - electric blocking of container position (limit switch); Hydraulic container locking COMBI-LOCK CTS XX, 24V : - outside and inside; - light signalling with locked container (green light); - blocking of sliding with tipping; 2. OPTIONS Audible alarm with unlocked container (for hydraulic container locking); Additional container locking CTS XX-B; Blocking CE STOP in-cab button; Hydraulics - fast motion up to 100 ltr./min. - pneu controlled. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
46 CATALOGUE OF SKIPLOADERS SKIPLOADER : 140 kn version 7.1/
47 CATALOGUE OF SKIPLOADERS SKIPLOADER : 140 kn SKIPLOADERS Capacity ton version 7.1/
48 CATALOGUE OF SKIPLOADERS SKIPLOADER : 140 kn CTS 14 : CTS 14-T : CH= CH= Capacity class of the skiploader : 140 kn Capacity class of the undercarriage (total weight) : tons Specifications : Type Supply T Lifting and tipping capacity (t) Lifting capacity A (t) Lifting capacity B (t) - 10 Lifting capacity C (t) 8,5 8,5 Lifting capacity D (t) - 7 Lifting capacity E (t) Maximal pressure (MPa) System weight without operating fluids (kg) F ( ) G (mm) H (mm) I (mm) J (mm) K (mm) 3.750* 3.750* EXT (mm) 250 / / 450 L (mm) M (mm) CH (mm) * without extension EXT CH = height of the undercarriage (mm) Recommended wheel base : Recommended basic volume of oil tank : Hydraulic pump recommended values : mm 80 lt. min. 60 lt./min. / 28,5 MPa version 7.1/
49 CATALOGUE OF SKIPLOADERS SKIPLOADER : 140 kn CTS T : Equipment of the skiploader Capacity class of the skiploader : 140 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (electric) /4, 24V; (for CTS 14) Remote control (electric) /4, 24V; Hydraulic distributor (electric) /6, 24V; (for CTS 14-T) Remote control (electric) /6, 24V; One tipping hook - DIN (CTS T);; Two tipping hooks - distance = 660 mm (CTS T); Two tipping hooks - distance = x mm according to customer requirements (CTS T); Chains with shorteners and lifting stirrups (14.14-T); Chains with shorteners and lifting hooks (14.14-T); 2. OPTIONS Platform extension EXT +250; Platform extension EXT +450; Extension of the supporting legs mm (for higher chassis); Extension of the supporting legs with rollers; Aluminium coversheet for main cylinders; Controls (emergency) on the right side; Cab protection barrier mm high. Notes : Only one hydraulic distributor and one type of tipping hook is possible to mount on one skiploader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
50 SKIPLOADER : 180 kn CTS 18 : CTS 18-T : CH= CH= Capacity class of the skiploader : 180 kn Capacity class of the undercarriage (total weight) : tons Specifications : Type Supply T Lifting and tipping capacity (t) Lifting capacity A (t) Lifting capacity B (t) - 11 Lifting capacity C (t) 12,4 12,4 Lifting capacity D (t) - 8,4 Lifting capacity E (t) Maximal pressure (MPa) System weight without operating fluids (kg) F ( ) G (mm) H (mm) I (mm) J (mm) K (mm) 4.200* 4.200* EXT (mm) 250 / / 450 L (mm) M (mm) CH (mm) * without extension EXT CH = height of the undercarriage (mm) Recommended wheel base : Recommended basic volume of oil tank : Hydraulic pump recommended values : mm 80 lt. min. 80 lt./min. / 28,5 MPa version 7.1/
51 SKIPLOADER : 180 kn CTS T : Equipment of the skiploader Capacity class of the skiploader : 180 kn Capacity class of the undercarriage (total weight) : tons 1. BASIC EQUIPMENT Hydraulic distributor (electric) /4, 24V; (for CTS 18) Remote control (electric) /4, 24V *; Hydraulic distributor (electric) /6, 24V; (for CTS 18-T) Remote control (electric) /6, 24V *; One tipping hook - DIN (CTS T); Two tipping hooks - distance = 660 mm (CTS T); Two tipping hooks - distance = x mm according to customer requirements (CTS T); Chains with shorteners and lifting stirrups (18.18-T); 2. OPTIONS Platform extension EXT +250; Platform extension EXT +450; Extension of the supporting legs mm (for higher chassis); Extension of the supporting legs with rollers; Aluminium coversheet for main cylinders; Controls (emergency) on the right side; Cab protection barrier mm high. Notes : Only one hydraulic distributor and one type of container locking is possible to mount on one hookloader. For In-cab controls see price list, category Hydraulic distributor, In-cab control. version 7.1/
160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
Container Handling Systems: top quality, high-tech and service of the widest range ensure the best return on investment for each application
Lifetime excellence container handling systems Container Handling Systems: top quality, high-tech and service of the widest range ensure the best return on investment for each application Overview ContentS
Electric Powered Forklift 1.5-2.0 ton
Electric Powered Forklift 1.5-2.0 ton E4 C4E150 C4E160-180 C4E160L-180L C4E200 www.bt-forklifts.com Electric Powered Forklift 1.5 ton Truck specifications C4E150 1.1 Manufacturer BT 1.2 Model C4E150 1.3
Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier
Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier A. Requirement This document is to be used to specify the physical and operational
Cardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
» 30,000 to 60,000 lb. capacity» Single and tandem axle
ROLL-OFF CABLE HOISTS Tel: 800.285.0666 sales@wastequip.com www.wastequip.com Extendable Tail (EX) cable hoists are ideal for areas with clearance issues that require a low loading height.» 30,000 to 60,000
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
A U T O M O T I V E L I F T S
Q U A L I T Y Y O U E X P E C T AT A P R I C E Y O U W O U L D N T T H E S TA N D A R D I N I N F O R M AT I O N, E Q U I P M E N T A N D D I A G N O S T I C S S Y S T E M S h t t p : / / d i a g n o s
ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
RAD-SYS-NEMA4X-SMS Control Cabinet. Solution guide for SMS-based remote access control and intrusion detection system
Solution guide for SMS-based remote access control and intrusion detection system Contents Application: Remote access control and intrusion detection Page 1 Solution: SMS Relay control cabinet Page 2 System
PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Troubleshooting Guide for Jacks Down LED Lights
Troubleshooting Guide for Jacks Down LED Lights Equalizer Systems Auto-Level systems manufactured after 2005 feature a pressure switch system that monitors the retracted state of leveling jacks and any
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
P 602. This generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001.
This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product
Buy a Czech Medical Carts For Your Healthcare Facility
360 INSTRUMAN LINE healthcare carts Company profile with traditional quality Klaro spol. s. r. o. (Ltd.) is a leading Czech manufacturer of healthcare and handling carts, including a complete range and
BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM
BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM The crash rated elkosta Barrier Lift System BLS offers maximum security for highly sensitive entry or exit points against unauthorised vehicles attempting to break
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version
Electronic pressure measurement Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version WIKA data sheet PE 81.66 Applications Machine building
Pos. Qty. Article Description Price / Drilling capacity in steel 60 Ø 25 mm Tapping capacity M 20 Milling capacity in steel 60 150 cm³/min.
Offer 1 1 Vertical CNC-machining centre model FZ 12 W Magnum Completely refurbished pre-owned machine Updated in 2015 Year of construction: depends, weight 4.000 kg Scope of delivery: Column moving machining
JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
EK-X technical data. Vertical order picker EK-X
@ EK-X technical data. Vertical order picker EK-X 2 EK-X TECHNICAL DATA. Characteristics Weights Wheels Dimensions Performance Electric motors Other 1.1 Manufacturer STILL STILL STILL 1.2 Type designation
RH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
Appendix A1- Technical Specifications
Appendix A1- Technical Specifications 1. INTENDED USE 1.1. THE REACHSTACKERS (R.S) WILL BE USED AT ISR's sites THE R.S WILL BE USED FOR HANDLING OF 20' - 40' ISO CONTAINERS IN CONFINED AREAS WITH LIMITED
Sideloader Truck Models 9300 and 9400: Specification Sheet
Sideloader Truck Models 9300 and 9400: Specification Sheet Model 9300 and 9400 Trucks: Short Work Of Long Loads Reliable Maneuverable Durable. The Raymond Sideloader lets you store more in less space by
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
Operating instructions Switching amplifier for fibre optics. OBF5xx 704876 / 00 08 / 2010
Operating instructions Switching amplifier for fibre optics OBF5xx 70876 / 00 08 / 00 Contents Preliminary note. Symbols used Functions and features. Applications Installation. Attaching the fibre optics
Operating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
Tolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted
S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
Stellar Service Crane
Stellar Service Crane TC Series TECHNICAL SPECIFICATION GUIDE TC13 TC23 TC33 TC38 Our People. Our Products. TC SERIES TECHNICAL SPECIFICATION GUIDE The Stellar TC Series of cranes offer a combination of
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
CPS-3 Pallet Jack Scale
CPS-3 Pallet Jack Scale Operator Manual Thank you for purchasing the CAS CPS-3 Pallet Jack Scale. For your safety and correct operation of the scale, please read these instructions carefully before using
MAHA Two Post Lifts. Model: ECON III 3.0 ECON III 3.5 ECON III 4.0 ECON III 5.0 HL CS 4.0. Lifting Technology
Wir im Allgäu. MAHA Two Post Lifts Model: ECON III 3.0 ECON III 3.5 ECON III 4.0 ECON III 5.0 HL CS 4.0 Lifting Technology DIN EN ISO 9001:2008 ISO 14001:2004 DIN EN 16001:2009 SINCE 1969 For passenger
Pos. Qty. Article Description Price / Clamping surface 1.300 x 430 mm Additional table load 1200 kg 3 T-slots 14 H12 for mounting on fixture, etc..
Offer 1 1 Vertical CNC-machining centre model STAMA MC 531 Completely refurbished pre-owned machine Year of construction: 1998, Weight: 8.000 kg Machine-No. 1113 (Picture similiar) Scope of delivery: Technical
RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
E&P HYDRAULICS Remote control EPRC-01 Level System Camper
USER S GUIDE E&P HYDRAULICS Remote control EPRC-01 Level System Camper 1 Copyright 2012, E&P Hydraulics This manual is copyrighted, with all rights reserved. Under the copyright laws, this may not, in
303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit
TRUCK SPECIFICATION. Info for all Truck
TRUCK SPECIFICATION Info configuration trucks for concrete pumps Info for all Truck All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable
SPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
Solid Core and Split Core Adjustable Current Status Switches CSS-O, CSS-C; CSP-O, CSP-C
Solid Core and Split Core Adjustable Current Status Switches CSS-O, CSS-C; CSP-O, CSP-C DESCRIPTION FEATURES PRODUCT DATA Very low operating trip points LED status indication Integral DIN rail mounting
STATE OF NORTH CAROLINA 3950-3 DEPARTMENT OF ADMINISTRATION MARCH 10, 2010 PURCHASE AND CONTRACT DIVISION NEW ISSUE
STATE OF NORTH CAROLINA 3950-3 DEPARTMENT OF ADMINISTRATION MARCH 10, 2010 PURCHASE AND CONTRACT DIVISION SUPERSEDING NEW ISSUE SPECIFICATION FOR TRUCKS, FORKLIFT, ELECTRIC (This specification is released
NÜVE SANAYİ MALZEMELERİ İMALAT VE TİCARET A.Ş. OT 020 BENCH TOP STEAM STERILIZER USER S MANUAL
NÜVE SANAYİ MALZEMELERİ İMALAT VE TİCARET A.Ş. OT 020 BENCH TOP STEAM STERILIZER USER S MANUAL NÜVE SANAYİ MALZEMELERİ İMALAT VE TİCARET A.Ş. Esenboğa Yolu 22 km Akyurt - ANKARA / TURKEY Tel : (00 90 312)
LC/LCD ranges level controllers
GRUNDFOS WASTEWATER LC/LCD ranges level controllers 18 Grundfos Sololifts > Grundfos LC/LCD controllers Keeping a close eye on liquid levels Reliable level controllers from Grundfos Grundfos offers a choice
JOHN DEERE. Front Linkage Front PTO
Front Linkage Front PTO Great technology for the work in the field Optimum quality latest technology compact design use worldwide SAUTER Conception Development, production, sales and technical support
BLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
WOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
SPILL CONTAINMENT PALLETS
SPI CONTAINMENT PAETS According to the regulations the storage of lubricant or fuel drums in industrial or workshop environments requires suitable containers which can collect the fluids in case of eventual
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
ELECTRIC CENTRAL HEATING FLOW BOILER
ELECTRIC CENTRAL HEATING FLOW BOILER EKCO.T Used product can t be treated as general communal waste. Disassembled appliance has to be delivered to the collection point of electrical and electronic equipment
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
language TRACTORS RANGE
language TRACTORS RANG TH MOST COMPRHNSIV RANG. The range of FRRARI specialist tractors consists of high-performance machines that are extremely reliable T RANG Powers up to 35 HP RAPTOR 06 and multi-functional,
HOW HYDRAULIC TRUCK CRANES WORK
HOW HYDRAULIC TRUCK CRANES WORK Heavy rains spawned by Hurricane Danny flooded many parts of Charlotte, NC. Flood waters rose so quickly in Little Sugar Creek that the underpinnings of a train trestle
Boom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
Precision digital pressure gauge Model CPG1500
Calibration technology Precision digital pressure gauge Model CPG1500 WIKA data sheet CT 10.51 for further approvals see page 4 Applications Oil and gas industry Maintenance and service facilities Calibration
USE AND MAINTENANCE MANUAL
FORKS POSITIONER Mod. FR-FP-FFP ORIGINAL INSTRUCTIONS INTRODUCTION This manual includes instructions for assembly, maintenance (regular and extraordinary), and for possible faults with remedies. The instructions
Worldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
V1504 Vertical Platform Lift OWNER S MANUAL
V1504 Vertical Platform Lift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000692 03-m12-2013 2 IMPORTANT Ensure that only an authorized Savaria Dealer
WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES
WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK PAGE 02 ENGLISH STATUS 01. 2013
Bælte-lifte Crawlerlifts
Bælte-lifte Crawlerlifts PrisListe 2015 TRACKED PLATFORMS - 2 - EASY LIFT R130 Max. working height: 12.20 m Max. working outreach (200 kg): 06.50 m Turntable rotation: 320 Aluminium basket 1100x700x1100
Incubator with mechanical convection
BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,
Discharge station for bags and big bags. MKSB
Discharge station for bags and big bags. MKSB Discharge station for bags and big bags. One machine for two applications. The Bühler discharge station is versatile and flexible to use thanks to its modular
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
www.towerlight.it is a powerful support tool with updated specifications sheets for the most recent products RESEARCH AND DEVELOPPEMENT
Lighting Towers At your service WEB SITE is a powerful support tool with updated specifications sheets for the most recent products RESEARCH AND DEVELOPPEMENT Using the most advanced 3D technologies the
Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB
, GH Q631 0076 R0111 2CDC 071 240 F0003 The Shutter Actuator Standard is used to control a maximum of four independent 230 VAC drives for positioning shutters, blinds, awnings and other hangings as well
STOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
225C-024T-05. Continuous control rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators
Actuators Technical data sheet 225C-024T-05 Continuous control rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations.
2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
Mechanical Cylinders
Mechanical Cylinders 1 Wormgear 2 Spherical plain bearings 3 Motor flange, IEC-norm 4 Lubricator 5 Air vent 6 Spindle nut 7 Trapezoidal spindle 8 Cylinder tube 9 Piston tube 10 Sealing 11 Wiper 12 Rotation
TAS ITA. DA1, dual csatlakozásfor thermostat. For control of 2 heaters on 1 thermostat. * * * * * * * * 41.729.220 Thermostat for CH 12/18
ACCESSORIES RT1, RT2, RT3 IT1 DA1 Thermostat for CH 12/18. Digital timer, burning and ventilating. Fault detector GSM. GSM temperature fault detector. THERMOSTATS RT1, room thermostat -10/+40 C with 5
PC 80MR. Midi-Excavator PC80MR-3. ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³
PC 80MR Midi-Excavator PC80MR-3 ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³ Walk-Around The new PC80MR-3 compact midi-excavator is the result
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
In addition, a number of auxiliary options are available (para 2.7) as well as optional slices for special requirements (para 2.8).
DS3002 1. General Description This data sheet describes the Modular Power (MP) Electro Hydraulic Power Units, which have been designed to provide an advanced and flexible means of brake control. The MP
ZMR 80 STEREO MODULAR ZONER USERS MANUAL
ZMR 80 STEREO MODULAR ZONER USERS MANUAL Lime Technologies http://limetechnologies.co.uk Tel: 08712 233127 ZMR80 Stereo Modular Zoner Mixer Introduction The modular construction of the ZMR80 allows it
KALMAR RTG - FOR HIGHER PRODUCTIVITY
KALMAR RTG - FOR HIGHER PRODUCTIVITY Easy operation built in to ensure productivity Ergonomic and productive working environment Good visibility. Easy spotting with stepless controls. All controls for
Technical Information
Technical Information TI No. WL 80-46 E July 2001 Rolling Bearings FAG Hand Pump Sets The programme of FAG hand pump sets comprises the following basic designs: - PUMPE1000.0,7L (one-step pump) - PUMPE1000.4L
[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
1115 4G SERIES GOVERNOR. 4-20 ma ANALOGUE DIGITAL SPEED SETTING
1115 4G SERIES GOVERNOR with 4-20 ma ANALOGUE & DIGITAL SPEED SETTING PO Box 28, 9300AA Roden, The Netherlands Tel: +31 505019888 Fax: +31 505013618 E-mail: regulateurs@regulateurs-europa.com 1115 4G
DALI RC BASIC SO. Control unit Operating instructions
DALI RC BASIC SO Control unit Operating instructions Contents Safety... 4 General instructions 4 Safety instructions 4 Description... 5 Purpose and application 5 Function 5 Light control 5 Brightness
32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw
![32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw](/thumbs/33/15930623.jpg "32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw")
,QGXVWULDO#*HQHUDWRU 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 10.4 kva, 8.3 kw 12.9 kva, 10.3 kw 6WDQGE\ 11.3 kva, 9 kw 14.4 kva, 11.5 kw Generator set consisting of engine and alternator mounted
Advantium 2 Plus Alarm
ADI 9510-B Advantium 2 Plus Alarm INSTALLATION AND OPERATING INSTRUCTIONS Carefully Read These Instructions Before Operating Carefully Read These Controls Corporation of America 1501 Harpers Road Virginia
Air pressure rise sensor
21 Air pressure rise sensor Voltage rating: Power rating: Max. safe pressure trucks, buses. 12 V 24 V 48 W 2943 kpa Part number Required pressure Kind of thread Terminal variety 501.13.20 14,7 4,9 9,8
Technical data. Danfoss DHP-A
Technical data Danfoss DHP-A An air heat pump which produces both heat and hot water Can operate efficiently down to -0 C Danfoss TWS tank gives plenty of hot water quickly and with low operating costs