Distillation PMA-4. Grabner MINI- FLASH Touch. Grabner MINI- FLASH TAG-4 RT-1 ADU 4+ Grabner MINIDIS ADXpert

Transcription

1

2 Flash Point We offer the very best in flashpoint test instruments. These instruments are loaded with user friendly features that simplify the testing process. Most instruments are available in a choice of Manual, Semi-Automatic, and Automatic versions. PMA-4 ASTM D93 Pensky-Martens Methods A & B Petrotest s PMA-4 is a fully automatic Pensky-Martens closed cup flashpoint tester. It is equipped with thermal detection, which is required to detect biodiesel flashes, and both gas and electric ignition options. A 12-position sample changer is available. Petrotest also offers a semi-automatic tester, the PM-4, and manual tester, the PM Model PMA-4 Automatic Model PM-4 Semi-automatic Model PMA-4 with Sample Changer (Shown) Model PM Manual Grabner MINI- FLASH Touch ASTM D6450 and D7094 MINIFLASH (2ml sample size) Grabner Instruments MINIFLASH flashpoint testers, when used per ASTM D7094, provide results statistically equivalent to ASTM D93 while using only a 2mL sample volume. The minimal volume offers improved safety over larger sample sizes, avoids offensive fumes in the testing area, and reduces sample waste. Various working ranges, as well as an 8-position sample changer, are available FLP And FLP Touch (0 C to 200 C) FLA with Sample Changer (0 C to 200 C) FLPH And FLPH Touch (10 C to 400 C) FLAH with Sample Changer (10 C to 400 C) FLPL (-25 C to 100 C) ASTM D56 TAG Method Petrotest s TAG-4 is a fully automatic TAG closed cup flashpoint tester whose method can indicate the possible presence of highly volatile and flammable materials in a relatively nonvolatile or nonflammable material. It is equipped with thermal detection and both gas and electric ignition options. Water cooling lowers the minimum working range temperature to -30 C Model TAG-4 Automatic Air Cooled Semi-automatic TAG Closed-cup Model TAG-4 Automatic Water Cooled TAG-4 Grabner MINI- FLASH ASTM D3828 RAPID Tester The RT-1 is a semi-automatic, small scale flashpoint tester. It is available in either closed or open cup models as well as a closed cup, stainless-steel model for testing aggressive samples RT-1 with Closed Aluminum/Brass Test Cup and Lid RT- 1 with Closed Stainless Steel Test Cup and Lid Rapid Tester with Open Aluminum/Brass Test Cup Distillation ASTM D86 ADU 4+ Automatic Distillation Unit Petrotest s ADU 4+ is a fully automatic distillation system that provides actual D86 data at a fraction of the cost of competitive models. Distillation data can be easily stored and graphed on its internal PC or output directly to a printer. The ADU-4 is also equipped with a Fire-Extinguisher Model ADU-4+ Automatic Distillation Unit, Basic Model RT-1 ADU 4+ ASTM D7344 Small Scale Distillation Testing MINIDIS ADXpert Automatic Distillation Grabner Instruments MINIDIS ADXpert completely automates the atmospheric distillation process from sample introduction through disposal. Expensive and fragile glassware is eliminated having been replaced by an inexpensive, disposable metal cup. The MINIDIS provides complete D86-like distillation results, including residual measurement via a built-in balance, in 15 minutes. Only 15ml of sample is needed for both flushing and distillation. The flushing and cleaning processes are also automated. ADXPERT MINIDIS Analyzer Grabner MINIDIS ADXpert

3 Fuel Analysis GASOLINE OCTANE ANALYSIS IROX-2000 Grabner Instruments IROX-2000 is a fully automatic mid-ftir analyzer that performs rapid, detailed gasoline analysis in less than three minutes. It can provide a detailed analysis including: distillation characteristics, benzene, octane (RON and MON), driveability index, total aromatics, total olefins, total saturates, RVP, total oxygen, and a built-in density meter for API measurements. With the ability to draw sample directly from a bottle, fuel analysis is easier than ever IROX 2000 ONLY 3 MINUTES FOR A COMPLETE GASOLINE ANALYSIS PROPERTIES RON / 93 Distillation IBP, T10, T50, T90, FBP MON / 83 RVP kpa AKI / 90 Density ,999 g/cm3 (integrated density meter) Driveability Index freely programmable parameters COMPONENTS Oxygenates Range / Accuracy in weight % Aromatics Range / Accuracy in weight % MTBE 0-20 / 10% Benzene 0-5 / 1% / 5-10 / 5% TAME 0-20 / 10% Toluene 0-20 / 5% ETBE 0-20 / 10% o-xylene 0-20 / 5% DIPE 0-20 / 10% p-xylene 0-20 / 5% Methanol 0-15 / 10% m-xylene 0-20 / 5% Ethanol 0-25 / 10% Ethyl benzene 0-20 / 5% Iso-Propanol 0-20 / 10% Propyl benzene 0-20 / 5% 2-Butanol 0-25 / 10% 2-Ethyl toluene 0-20 / 5% tert-butanol 0-25 / 10% 3-Ethyl toluene 0-20 / 5% 4-Ethyl toluene 0-20 / 5% Total Parameters Mesitylene 0-20 / 5% Aromatics 0-80 / 20% Pseudocumene 0-20 / 5% Olefi ns 0-50 / 10% Isodurene 0-20 / 5% Oxygen 0-8 / 2% Naphthalene 0-10 / 5% Saturates / 40% Additional components on request Octane Boosters: e.g. MMT, Nitromethane, DCPD, etc. Biodiesel Blend / Cetane Analysis IROX-Diesel Grabner Instruments IROX-Diesel performs detailed fuel analysis on diesel and biodiesel blends in less than three minutes. Its detailed analysis includes: biodiesel concentration (FAME), component determination, total aromatics, predictions of cetane number, cetane improver, and cetane index as well as density, for API measurements, from its built-in meter. With the ability to draw sample directly from a bottle, diesel and biodiesel analysis is easier than ever IROX Diesel IROX 2000 IROX Diesel ONLY 3 MINUTES FOR A COMPLETE DIESEL FUEL ANALYSIS Cetane Number Cetane Index Cetane Improver ppm Total Aromatics 0-60 wt. % Poly Nuclear Aromatics 0-40 wt. % Biodiesel in Diesel Fuel 0-40 m% Distillation Properties T85, T90, T95 Density (built-in density meter) ± g/ccm3 6 freely programmable parameters to determine properties like viscosity, cold properties, etc. Sulfur ASTM D4294 PHOENIX II The SPECTRO Phoenix II is a low cost, polarized ED-XRF solution for monitoring sulfur levels in pipelines, terminals or any at-line application (used to measure ULSD and other ULS applications). Easy to use and rugged, the Phoenix II can be deployed at a fraction of the cost of competitive instruments and is used to meet EPA testing requirements (40 CFR ). SPE-PHNXII SPECTRO Phoenix II PHOENIX II

4 Vapor Pressure Grabner Instruments revolutionized how the industry performs vapor pressure testing through the creation of the MINIVAP VPXpert and VPS. Today, no other manufacturer knows more about engineering vapor pressure instruments than Grabner. These vapor pressure testers remain the #1 choice of both industry and government agencies worldwide for RVP and V/L measurements. These are the most reliable, most frequently used vapor pressure analyzers. ASTM D5191 and D6378 / D6377 MINIVAP VPXpert/ VPS / VPSH The Grabner MINIVAP VPXpert automatically determines the vapor pressure of gasoline and gasolineoxygenate blends. It is the referee instrument used by U.S. government agencies, such as the EPA, for enforcement of environmental regulations. The VPS is used by all major refineries, pipeline companies, and independent inspection companies. Crude oil can be tested using the MINIVAP VPSH MINIVAP VPS ASTM D5191 and D (ambient to 60 C) MINIVAP VPXpert ASTM D5191 and D6378 (From 0 C to 120 C) MINIVAP VPSH ASTM D6377 (0 C to 100 C) ASTM D5188 MINIVOL LVR If you need to report V/L, you need the MINIVOL LVR. Direct measurement of V/L is required by ASTM D4814 for all gasoline-oxygenate blends as the method of calculating V/L is currently deemed unacceptable by the ASTM for use on blended gasoline. The LVR automatically measures the V/L ratio using only 4 ml of sample MINIVOL LVR On-Line Vapor Pressure Measurement ASTM D6378 MINIVAP On-Line Gasoline Vaper Pressure ASTM D6377 MINIVAP On-Line Crude Oil Vapor Pressure ASTM D6897 MINIVAP On-Line LPG Vapor Pressure Using the same technology as the MINIVAP VPS, Grabner Instruments MINIVAP ON-LINE allows you to monitor the vapor pressure of gasoline, crude oil, and LPG pipelines and processes. Capable of monitoring two sample streams, this reliable process analyzer also provides a vapor-to-liquid (V/L) ratio value as well as automatic calibration capability. The MINIVAP ON-LINE s measurements correlate with ASTM methods D323, D5191, D5188, and D1267. Storage Stability PetroOXY -- ASTM D7525 Testing of Gasoline & ASTM D7545 Diesel & Biodiesel Fuels The PetroOXY, by Petrotest, is the latest advancement in oxidation-stability testing technology. This alternative to the EN (Rancimat) test provides repeatable results in a minimum of time. With productivity that is two to five times better than EN 14112, the PetroOXY is ideal for comparing B100 and blended fuel stabilties, determining ideal additive concentrations, as well as process monitoring and control applications. The PetroOXY is very easy to set-up, run, and clean PetroOXY Automatic Oxidation Stability Tester Color Analysis AUTOMATIC COLORIMETERS Automatic colorimeters are capable of measuring the color of liquid chemicals, industrial oils, petroleum oils, fuels, dark oils, surfactants, water, wastewater and transparent liquids according to virtually any color scale. Available color scales include: ASTM D156 Saybolt, D1500 ASTM Color, Pt-Co/Hazen/ APHA, D6045 Tristimulus, and many more. MANUAL COLORIMETERS Manual colorimeters are a very cost-effective option for performing occasional color measurements. These color comparators allow operators to compare the color of a test sample against color standards in order to determine the value of the sample color. MINIVAP VPS MINIVAP VPXpert MINIVOL LVR PetroOXY

5 Viscosity We offer a full range of viscosity equipment and instruments including both standard and mini automatic viscometers, full-view constant temperature baths, and viscometer tube glassware. ASTM D445 TV2000/AKV Automatic Kinematic Viscosity The TV2000/AKV automates ASTM D445 viscosity measurements in the range of 0.3 to 10,000 cst. Simply place the sample in a viscosity tube and enter the tube ID. The TV2000/AKV will do the rest! The temperature ranges from ambient +5 up to +230 C. You can select either a Cannon-Fenske or Ubbelohde measuring head. The necessary viscosity tubes are available as accessories TV2000 Automated Kinematic Viscosity System TV2000/AKV Portable Viscosity Measurement - MINIVIS 445 Grabner Instruments MINIVIS 445 is an easy-to-use rolling ball viscometer. Featuring automatic sample introduction and cleaning, the MINIVIS provides fast results while using only 25ml of sample. The measurable viscosity range is 0.2 to 2000 mpas with a temperature range of 0 to 110 C (-20 C available with water cooling.) Minivis 445 Grabner MINIVIS VISCOSITY BATHS The TV-Series viscometer and calibration baths are specially designed for tests that not only require ultra-precise temperature control, but also where processes need to be followed visually such as viscosity per ASTM D445. Available in models of varying size and capacity, all of the baths can operate from ambient +5 C up to +230 C (± 0.01 C). Cooling options for performing sub-ambient testing are available. A complete selection of viscosity tubes and accessories is also available. TV Series Cold Flow Properties ASTM D97 Pour Point ASTM D2500 Cloud Point ASTM D2386 Freezing Point ASTM D6371 Cold Filter Plugging Point (CFPP) A range of fully automatic cold flow property analyzers are available. Safe and reliable, these analyzers are equipped with direct refrigeration technology that eliminates cryostats and their hazardous alcohols. Systems are available to automatically perform from one to four cold flow property tests simultaneously. Constant temperature baths and accessories are available for the manual performance of cold flow property tests.

6 Petrolab Company The refineries and import terminals in North America are limited to relatively few geographic locations. Consequently, the citizens and economies of the continent depend upon an extensive and efficient network of pipeline, terminal, and transport companies to deliver the quality energy products needed to heat and power their homes, businesses, and vehicles. Petrolab Company, an established and well-regarded source of petroleum testing instrumentation, is strongly positioned to support you in the control and quality assurance of your transport, storage, and fuel blending operations. In this document, we will introduce you to a selection of the petroleum testing and calibration instruments that we offer and service. More detailed information on individual products is available from our web site, or by contacting our Broken Arrow, OK, headquarters directly at or petrolab.sales@ametek.com N Indianwood Ave Broken Arrow, OK TEL: (918) FAX: (918) petrolab.sales@ametek.com , by AMETEK, Inc. Printed in the U.S.A. 2.5M308BG (060115)