ASTM Certified Glass Thermometers
|
|
|
- Sharyl Goodman
- 9 years ago
- Views:
Transcription
1 ASTM Certified Glass 8 Basic Unit Meets Strict Guidelines of the ASTM Provides Highly Accurate and Reproducible Measurements Variety of ASTM Applications Yellow Back with Permanent Markings for High Visibility Variety of Immersion Lengths and Styles New ASTM Glass from OMEGA are within accuracy tolerance and dimensional specifications for American Society of Testing Materials (ASTM) Standard. See introduction to add these options E-5 Shown with Optional GTM-742 Clip-On Magnifier, 3. See Accessory Page to Order.
2 Also Available: Set of 9 Traceable, ASTM Certified with Overlapping Ranges, 950. See ASTM Kit page. See Accessory page to order additional cases. E See introduction to add these options Ordering Example: ASTM-8C is a high distillation, total immersion style, 5.2" (386 mm) thermometer with -2 to 400 C range and divisions,. E-6 Did You Know? Galileo invented the first crude glass thermometer in the early 600 s. TM HIGHLIGHTED MODELS IN STOCK FOR FAST DELIVERY! ASTM-C C -20 to 50 C 2.7 (322) 3 (76) 8 ASTM-F F 0 to F 2.7 (322) 3 (76) 8 ASTM-2C 2C 62C General Use -5 to 0 C 5.4 (390) 3 (76) 25 ASTM-2F 2F 62F Partial Immersion 20 to 580 F 5.4 (390) 3 (76) 25 ASTM-3C 3C 73C -5 to 400 C 6.3 (43) 3 (76) ASTM-3F 3F 73F 20 to 760 F 6.3 (43) 3 (76) ASTM-4F 4F Acid Pour to 220 F 4.97 (380) 6 (52) ASTM-5C 5C C -38 to 50 C 9. (23) 4.3 (08) ASTM-5F 5F F Cloud and Pour -36 to 20 F 9. (23) 4.3 (08) ASTM-6C ASTM-6F 6C 6F 2C 2F Low Cloud and Pour -80 to 20 C -2 to 70 F 9. (232) 9. (23) 3 (76) 3 (76) ASTM-7C ASTM-7F 7C 7F 5C Low Distillation -2 to 0 C to 580 F 5.2 (386) 5.2 (386) ASTM-8C ASTM-8F 8C 8F 6C High Distillation -2 to 400 C to 760 F 5.2 (386) 5.2 (386) ASTM-9C ASTM-9F 9C 9F 5C 5F Low Pensky Martents -5 to 0 C 20 to 2 F.3 (7).3 (7) ASTM-0C ASTM-0F 0C 0F 6C 6F High Pensky Martents 90 to 370 C 200 to 700 F 5.3 (7).3 (7) ASTM-C ASTM-F C F C F Open Flash -6 to 400 C 20 to 760 F 5.3 (7).3 (7) ASTM-2C 2C 64C -20 to 0C 6.5 (420) 60 ASTM-2F 2F 64F Gravity -5 to 25 F 6.5 (420) 60
3 ASTM Certified Glass Immersion Style Partial Immersion Style GTSK-7720 Optional Mercury Control Spill Kit, 60. See Accessory Page to Order. A total immersion thermometer indicates temperatures correctly when the bulb and entire liquid column are immersed in the substance being measured. A partial immersion thermometer has a line indicating exact immersion length (see arrow above). Did You Know? Glass thermometers should never be subjected to extreme temperature changes. HIGHLIGHTED MODELS IN STOCK FOR FAST DELIVERY! ASTM-3C 3C 47C Loss on Heat 55 to 70 C 6. (55) 60 ASTM-4C 4C 7C 38 to 8C (377) 3. (79) 39 ASTM-4F 4F 7F Wax Melt Point 00 to 80 F 4.9 (377) 3. (79) 39 ASTM-5C ASTM-5F 5C 5F 60C Low Softening Point -2 to 80 C to 80 F 5.6 (397) 5.6 (397) ASTM-6C 6C 6C High Softening Point to 200 C 5.6 (397) 38 ASTM Modified Softening Point 40 to 347 F 5.6 (397) 38 ASTM-7C 7C 0 to 27 C 0 0. (257) 27 ASTM-7F 7F Saybolt Viscosity 66 to 80 F 0. (257) 27 ASTM-8C 8C 23C Also See ASTM Nos. 34 to 4C 0 0. (257) 27 ASTM-8F 8F 23F 79F to 08F 94 to 08 F 0. (257) 27 ASTM-9C ASTM-9F 9C 9F Below 49 to 57 C 20 to 34 F 0 0. (257) 0. (257) ASTM-20C 20C 57 to 65 C 0 0. (257) 27 ASTM-20F 20F 34 to 48 F 0. (257) 27 ASTM-2C ASTM-2F 2C 2F 79 to 87 C 74 to 88 F 0 0. (257) 0. (257) ASTM-22C 22C C 95 to 03 C 0 0. (257) 27 ASTM-22F 22F F 204 to F 0. (257) 27 ASTM-23C 23C 8 to C 8.4 (22) 3.5 (90) 37 ASTM-C C Engler Viscosity 39 to 54 C 9.3 (237) 3.5 (90) 37 ASTM-25C 25C 95 to 05 C 8.4 (22) 3.5 (90) 37 ASTM-26C 26C Stability NC to 40 C (463) 42 ASTM-27C 27C Turpentine Distillation 47 to 8C 2.2 () 3 (76) 39 ASTM-C C 36.6 to 39.4 C 20 2 (5) 9 ASTM-F F Kinematic Viscosity 97.5 to 02.5 F 0 2 (5) 9 ASTM-29C 29C with Auxiliary Scale 52.6 to 55.4 C 20 2 (5) 9 ASTM-29F 29F See also ASTM Nos to 32.5 F 0 2 (5) 9 ASTM-F F 43F and 72F to 22.5 F 0 2 (5) 9 ASTM-3F 3F Reid Vapor Pressure -40 to 20 F 2 (5) 2 ASTM-C C 20C -38 to 4C 6.5 (49) 2 (5) 47 ASTM-F F to 07.5 F 6.5 (49) 2 (5) 47 ASTM-34C 34C 2C Aniline Point 25 to 05 C 6.5 (49) 2 (5) 39 ASTM-34F 34F 77 to 2F 6.5 (49) 2 (5) 39 Ordering Example: ASTM-23C is an Engler viscosity, partial immersion style, 8.4" (22 mm) thermometer with 8 to C range and divisions, 37 E-7
4 Use ASTM Glass Where Highly Accurate Measurements are Needed Meets Strict Guidelines of the ASTM Provides Highly Accurate and Reproducible Measurements Variety of ASTM Applications Yellow Back with Permanent Markings for High Visibility Variety of Immersion Lengths and Styles Ordering Example: ASTM-50F is a gas calorimeter inlet, total immersion style, 8" (468mm) thermometer with 54 to 0 F range and 0 divisions, 68. ASTM-CASE--8 is a case for an 8" thermometer, (see page E-23 for additional cases). E-8 See Introduction Page to add these options. HIGHLIGHTED MODELS IN STOCK FOR FAST ASTM-35C 35C 59C 90 to 70 C 6.5 (49) 2 (5) 4 ASTM-35F 35F Aniline Point 94 to 8 F 6.5 (49) 2 (5) 4 ASTM-36C 36C Titer Test -2 to 68 C 6 (405).7 (45) 4 ASTM-37C 37C 77C -2 to 5C 5.5 (395) 4 (02) 38 ASTM-38C 38C 78C to 78 C 5.5 (395) 4 (02) 42 ASTM-39C 39C 79C Solvents Distillation 48 to 0C 5.5 (395) 4 (02) 44 ASTM-40C 40C 80C Also see ASTM 72 to 26 C 5.5 (395) 4 (02) 47 ASTM-4C 4C 8C No. 02C 98 to 5C 5.5 (395) 4 (02) 53 ASTM-42C 42C 82C 95 to 255 C 5.5 (395) 4 (02) 53 ASTM-43C 43C -5.6 to -34 C (420) 7 ASTM-43F 43F -6 to -29 F 6.5 (420) 7 ASTM-44C 44C 8.6 to 2.4 C 20 2 (5) 90 ASTM-44F 44F 66.5 to 7.5 F 0 2 (5) 90 ASTM-45C 45C 23.6 to 26.4 C 20 2 (5) 90 ASTM-45F 45F Kinematic Viscosity 74.5 to 79.5 F 0 2 (5) 90 ASTM-46C 46C Also see ASTM Nos to 5.4 C 20 2 (5) 90 ASTM-46F 46F C and 73F 9.5 to.5 F 0 2 (5) 90 ASTM-47C 47C 58.6 to 6.4 C 20 2 (5) 90 ASTM-47F 47F 37.5 to 42.5 F 0 2 (5) 90 ASTM-48C 48C 80.6 to 83.4 C 20 2 (5) 90 ASTM-48F 48F 77.5 to 82.5 F 0 2 (5) 90 ASTM-49C 49C Stormer Viscosity 20 to 70 C 2 (5) 2.5 (65) 38 ASTM-50F 50F Gas Calorimeter Inlet 54 to 0 F 0 8 (468) 68 ASTM-5C ASTM-5F 5C 5F Gas Calorimeter Outlet 20 to 47 C 69 to 5 F (468) 8 (468) ASTM-52C 52C Butadiene Boiling Point Range -0 to 5 C 0 6 (62) 42 ASTM-53C 53C Benzene Freezing Point -0.6 to 0.4 C 0 7 (89) 35 ASTM-54C ASTM-54F 54C 54F 8C 8F Congealing Point 20 to 00.6 C 68 to 23 F 2 (32) 2 (32) ASTM-56C ASTM-56F 56C 56F Bomb Calorimeter 9 to 35 C 66 to 95 F (585) 23 (585) 7 7 ASTM-57C 57C Tag Closed Tester -20 to 50 C (7) 23 ASTM-57F 57F Low Range -4 to 2F (7) 23 ASTM-58C ASTM-58F 58C 58F Tank Low -34 to 49 C - to 20 F 2 (5) 2 (5) ASTM-59C ASTM-59F 59C 59F Tank Medium -8 to 8C 0 to 80 F 2 (5) 2 (5) ASTM-60C 60C 77 to 260 C 2 (5) 25 ASTM-60F 60F Tank High 70 to 500 F 2 (5) 25 ASTM-6C ASTM-6F 6C 6F 63C Petrolatum Melting Point 32 to 27 C 90 to 260 F 5 (38) 5 (38) 3. (79) 3. (79) E
5 ASTM Certified Glass Did You Know? The first closed-glass thermometer was developed in Italy by Leopoldo, Cardinal dei Medici, a co-founder of the Academia de Cimento. See Introduction Page to add these options. ASTM's Start From 8 HIGHLIGHTED MODELS IN STOCK FOR FAST DELIVERY! Mercury and Markings Contrast Against Yellow Back for High Visibility. ASTM-62C 62C -38 to C 0 5 (379) 74 ASTM-62F 62F -36 to 35 F 5 (379) 57 ASTM-63C 63C -8 to 3C 0 5 (379) 86 ASTM-63F 63F 8 to 89 F 5 (379) 86 ASTM-64C 64C 25 to 55 C 0 5 (379) 86 ASTM-64F 64F 77 to 3 F 5 (379) 86 ASTM-65C 65C 50 to 80 C 0 5 (379) 90 ASTM-65F 65F 22 to 76 F 5 (379) 90 ASTM-66C ASTM-66F 66C 66F Precision 75 to 05 C 67 to 2F 0 5 (379) 5 (379) ASTM-67C 67C 95 to 55 C 5 (379) 99 ASTM-67F 67F 203 to 3 F 5 (379) 99 ASTM-68C 68C 45 to 205 C 5 (379) 07 ASTM-68F 68F 293 to 40 F 5 (379) 07 ASTM-69C 69C 95 to 5 C 5 (379) 5 ASTM-69F 69F 383 to 58 F 5 (379) 5 ASTM-70C 70C 295 to 405 C 5 (379) 25 ASTM-70F 70F 563 to 76 F 5 (379) 25 ASTM-7C 7C 72C -37 to C 4 (355) 3 (76) ASTM-7F 7F 72F -35 to 70 F 4 (355) 3 (76) ASTM-72C 72C Oil in Wax -9.4 to -6.6 C 20 2 (5) 92 ASTM-72F 72F -2.5 to 2.5 F 0 2 (5) 92 ASTM-73C 73C Kinematic Viscosity with -4.4 to C 20 2 (5) 29 ASTM-73F 73F Auxiliary Scale to F 0 2 (5) 29 ASTM-74C 74C Also see ASTM Nos to C 20 2 (5) 29 ASTM-74F 74F F and 43F to F 0 2 (5) 29 ASTM-75F ASTM-76F 75F 76F Antifreeze Freezing Point -35 to 35 F -65 to 5 F 6 (408) 6 (408) 4 (02) 4 (02) ASTM-77F 77F 5 to 265 F (275) 3 ASTM-78F 78F 296 to 35 F (275) 32 ASTM-79F 79F Saybolt Viscosity 345 to 365 F (275) 32 ASTM-80F 80F 395 to 45 F (275) 32 ASTM-8F 8F 445 to 465 F (275) 32 ASTM-82C ASTM-82F 82C 82F Fuel Rating, Engine -5 to 05 C 0 to 220 F 6 (60) 6 (60).2 ().2 () ASTM-83C ASTM-83F 83C 83F Fuel Rating, Air 5 to 70 C 60 to 60 F 7 (70) 7 (70).6 (40).6 (40) 3 3 the British Institute of Petroleum (IP) and ASTM. Ordering Example: ASTM-72F is an oil in wax, total immersion style, 2" (5 mm) thermometer with -2.5 to 2.5 F range and 0 divisions, 92. (See page E-23 for thermometer cases). E-9
6 Choose ASTM for Applications Requiring Extreme Accuracy HIGHLIGHTED MODELS IN STOCK FOR FAST DELIVERY! Immersion Style Thermometer Scales are Graduated in Degrees, Fractions and Multiples of Degrees. See Introduction Page to add these options. ASTM Provide Accurate, Reproducible Measurements E Partial Immersion Style A total immersion thermometer indicates temperatures correctly when the bulb and entire liquid column are immersed in the substance being measured. A partial immersion thermometer has a line indicating exact immersion depth (see arrow above). ASTM-84C ASTM-84F 84C 84F Fuel Rating, Orifice Tank 25 to 80 C 75 to 75 F 5 (380) 5 (380) 0 (9) 0 (9) 3 3 ASTM-85C ASTM-85F 85C 85F Fuel Rating, Surge 40 to 50 C 00 to 0 F 2 () 2 () 7 (8) 7 (8) ASTM-86C ASTM-86F 86C 86F Fuel Rating, Mix 95 to 75 C 200 to 350 F 7 (67) 7 (67) (35) (35) ASTM-87C ASTM-87F 87C 87F Fuel Rating, Coolant 50 to 205 C 0 to 400 F 7 (72) 7 (72) 2 (40) 2 (40) ASTM-88C ASTM-88F 88C 88F Vegetable Oil Flash 0 to 200 C 50 to 39F (7) (7) 2 (58) 2 (58) 3 3 ASTM-89C 89C -20 to 0 C 0 5 (370) 3 (76) 58 ASTM-90C 90C 0 to C 0 5 (370) 3 (76) 40 ASTM-9C 9C 20 to 50 C 0 5 (370) 3 (76) 54 ASTM-92C 92C Solidification Point 40 to 70 C 0 5 (370) 3 (76) 56 ASTM-93C 93C Also see ASTM 60 to 90 C 0 5 (370) 3 (76) 59 ASTM-94C 94C No. 00C 80 to 0 C 0 5 (370) 3 (76) 6 ASTM-95C 95C 00 to C 0 5 (370) 3 (76) 62 ASTM-96C 96C 20 to 50 C 0 5 (370) 3 (76) 66 ASTM-97C 97C -8 to 49 C 2 (5) ASTM-97F ASTM-98C 97F 98C Tank 0 to 20 F 6 to 8C 2 (5) 2 (5) ASTM-98F 98F 60 to 80 F 2 (5) ASTM-99F 99F Weathering Test, Hg. Thalium -55 to 40 F 2 (5) (35) 85 ASTM-00C 00C ASTM-0C 0C Solidification Point 45 to 205 C 95 to 5 C 2 5 (370) 5 (370) 3 (76) 3 (76) 46 5 ASTM-02C 02C 83C 23 to 77 C 6 (395) 4 (00) 55 ASTM-03C 03C 84C 48 to 20C Solvents Distillation 6 (395) 4 (00) 57 ASTM-04C 04C 85C 73 to 227 C Also see ASTM 6 (395) 4 (00) 58 ASTM-05C 05C 86C 98 to 25C No. 37C 6 (395) 4 (00) 6 ASTM-06C 06C 87C 223 to 277 C 6 (395) 4 (00) 64 ASTM-07C 07C 88C 8 to C 6 (395) 4 (00) 66 ASTM-08F 08F 270 to 290 F (275) 34 ASTM-09F 09F Saybolt Viscosity 320 to 340 F (275) 34 Ordering Example: ASTM-93C is a solidification point, partial immersion style, 5" (370 mm) thermometer with 60 to 90 C range and 0 divisions, 59. (See page E-23 for thermometer cases). E-0
7 ASTM Certified Glass 8 Basic Unit See Introduction Page to add these options. Did You Know? Early Florentine thermometers were filled with distilled colored wine. ASTM-0C 0C - Kinematic Viscosity with.6 to 36.4 C 20 2 (5) 98 ASTM-0F 0F - Auxiliary Scale to F 0 2 (5) 98 ASTM-C C - Tar Acid Distillation 70 to 250 C 6 (395) 4 (00) 50 ASTM-2C 2C - Solidification Pt, Benzene 4 to 6 C 50 8 (25) 0 ASTM-3C ASTM-3F 3C 3F 89C 89F Bituminous Material S.P. - to 75 C to 350 F 6 (406) 6 (406) ASTM-4C 4C 4C Aviation Fuel F.P. -80 to 20 C 2 (0) 49 ASTM-6C ASTM-7C 6C 7C - - Bomb Calorimeter 8.9 to 25. C 23.9 to. C (609) (609) ASTM-8C 8C - Kinematic Viscosity with.6 to 3.4 C 20 2 (5) 92 ASTM-8F 8F - Auxiliary Scale 83.5 to 88.5 F 0 2 (5) 92 ASTM-9C ASTM-9F 9C 9F - - Antifreeze Freezing Point to - C -37 to -2F 0 7 (420) 7 (420) 4 (00) 4 (00) ASTM-20C 20C - Kinematic Viscosity with 38.6 to 4.4 C 20 2 (5) 9 ASTM-2C 2C - Auxiliary Scale 98.6 to 0.4 C 20 2 (5) 9 ASTM-22C 22C 94C -45 to -35 C 0 2 (5) 05 ASTM-23C ASTM-C 23C C 95C 96C Brookfield Viscosity -35 to -25 C -25 to -5 C (5) 2 (5) ASTM-25C 25C 97C -5 to -5 C 0 2 (5) 73 ASTM-26C 26C to -.6 C 20 2 (5) 94 ASTM-26F 26F to -2.5 F 0 2 (5) 94 ASTM-27C 27C to -8.6 C 20 2 (5) 94 ASTM-C C - Kinematic Viscosity -.4 to.4 C 20 2 (5) 92 ASTM-F F to 34.5 F 0 2 (5) 92 ASTM-29C 29C to 94.4 C 20 2 (5) 92 ASTM-29F 29F to F 0 2 (5) 92 Ordering Example: ASTM-6C is a bomb calorimeter, total immersion style, " (609 mm) thermometer with 8.9 to 25. C scale and 00 divisions,. (See page E-23 for thermometer cases). E-
8 ASTM Certified, Traceable Glass Available Individually or in Sets of Nine See Introduction Page to add these options. E Complete Set of Nine 950 ASTM Certified, Fahrenheit Models To Order (Specify Model Number) Model No. Price Range Divisions ASTM-3962F to 35 F ASTM-3963F 6 8 to 89 F ASTM-3964F to 3 F ASTM-3965F to 76 F ASTM-3966F to 2F ASTM-3967F 203 to 3 F ASTM-3968F to 40 F ASTM-3969F to 58 F ASTM-3970F to 76 F ASTM-39620F 950 Set of all nine listed above, with leatherette carrying case Mercury in Glass, 5" (380 mm) Length ASTM Certified, Traceable Ice Point Auxiliary Scale and Factory Certificate of Corrections Included Immersion Style Wide Selection of Ranges in F or C Available Individually or in Complete Sets of 9 in F or C Buy Any Three on this Page and Receive a 5% Discount! Certified 6 Basic Unit HIGHLIGHTED MODELS IN STOCK FOR FAST DELIVERY! ASTM Certified, Celsius Models To Order (Specify Model Number) Model No. Price Range Divisions ASTM-3962C to C 0 ASTM-3963C 6 8 to 3C 0 ASTM-3964C to 55 C 0 ASTM-3965C to 80 C 0 ASTM-3966C to 05 C 0 ASTM-3967C 95 to 55 C ASTM-3968C to 205 C ASTM-3969C to 5 C ASTM-3970C to 405 C ASTM-39600C 950 Set of all nine listed above, with leatherette carrying case All thermometers come complete with icepoint auxiliary scale, factory certificate of corrections, and operator's manual. Optional Cases available. See accessories page. Ordering Example: ASTM-3964F is a glass thermometer with 77 to 3 F range, 5 divisions, 92. ASTM--6 is a 6" case for a single thermometer, E-2
PRODUCT GUIDE 2014. PRECISION INSTRUMENTS FOR Temperature, Density, Time, Weather and Calibration
PRODUCT GUIDE 2014 PRECISION INSTRUMENTS FOR Temperature, Density, Time, Weather and Calibration TRIPLE ACCREDITED / REGISTERED ISO 9001:2008, ISO 14001:2004, ISO/IEC 17025:2005 Welcome to H-B Instrument
15. Liquid-in-Glass Thermometry
123 15. Liquid-in-Glass Thermometry Even though the liquid-in-glass thermometer is used much less frequently today than formerly, it is still a very commonly used device. Although it is normally an instrument
Crude Assay Report. Crude Oil sample marked. "AL SHAHEEN CRUDE OIL" dated 10th April 2006. On Behalf Of. Maersk Oil Qatar AS
Crude Assay Report on Crude Oil sample marked "AL SHAHEEN CRUDE OIL" dated 10th April 2006 On Behalf Of Maersk Oil Qatar AS With compliments Intertek Caleb Brett, Fujairah Caleb Brett Fujairah Fujairah
Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 9.1
Designation: D 1298 99 e2 An American National Standard Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 9.1 Designation: 160/99 Standard Test Method for Density, Relative Density
Annex to the Accreditation Certificate D PL 17640 01 00 according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 17640 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 05.06.2015 to 04.11.2018 Holder of certificate: Haltermann
petrochemical products identifies equipment latest specifications of ASTM as well as other international test standards.
P E T R O L E U M / P E T R O C H E M I C A L T E S T G U I D E T his A G u i d e t o A S T M a n d R e l a t e d S t a n d a r d T e s t s guide to current tests for petroleum and petrochemical products
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis
VHG Labs, Inc. and Supplies for Spectrochemical Oil Analysis Section 1 Multi-Element Coolant Standard Coolant Standard The following standard is intended for use in the analysis of metals in ethylene glycol
Portable digital microprocessor thermometers with interchangeable probes
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: [email protected] Internet: www.jumo.net
Laboratory Exercise: Calibration of a Thermometer
CHEM 109 Introduction themistry Revision 3.1 Laboratory Exercise: Calibration of a Thermometer In this exercise we will calibrate a stem-type thermometer and then use it to correctly measure the Air temperature
Chapter Test A. States of Matter MULTIPLE CHOICE. a fixed amount of STAs2 a. a solid. b. a liquid. c. a gas. d. any type of matter.
Assessment Chapter Test A States of Matter MULTIPLE CHOICE Write the letter of the correct answer in the space provided. 1. Boyle s law explains the relationship between volume and pressure for a fixed
Name Date Class STATES OF MATTER. SECTION 13.1 THE NATURE OF GASES (pages 385 389)
13 STATES OF MATTER SECTION 13.1 THE NATURE OF GASES (pages 385 389) This section introduces the kinetic theory and describes how it applies to gases. It defines gas pressure and explains how temperature
Viscosity - Flow Cups. elcometer.com
elcometer.com Viscosity - Flow Cups 1 Viscosity - Flow Cups Elcometer 2350 & 2354 Viscosity Flow Cups Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel
ADU 5. Automatic Distillation Unit
ADU 5 Automatic Distillation Unit Atmospheric Distillation Distillation tests are used to characterize the volatility of petrochemical products. These volatility characteristics are a critical measurement
Filtered Prime Yellow Type 1. Centrifuged fatty Grey Type 3. Light orange
Carnauba Wax We offer carnauba wax T1, T3, and T4 that is hardest of all the waxes and is used in various applications like: tablet coating material in pharmaceutical industry, in chewing gums, sauces,
Melting Point, Boiling Point, and Index of Refraction
Melting Point, Boiling Point, and Index of Refraction Melting points, boiling points, and index of refractions are easily measured physical properties of organic compounds useful in product characterization
ASTM Thermometers, Test Specimens and Glassware
, Test Specimens and Glassware Test Methods Page ASTM Thermometers...184 Glass Apparatus for ASTM Test Methods...192 Standardized Metal Test Specimens...197 www.koehlerinstrument.com Koehler is pleased
Experiment #10: Liquids, Liquid Mixtures and Solutions
Experiment #10: Liquids, Liquid Mixtures and Solutions Objectives: This experiment is a broad survey of the physical properties of liquids. We will investigate solvent/solute mixtures. We will study and
UNIT 6a TEST REVIEW. 1. A weather instrument is shown below.
UNIT 6a TEST REVIEW 1. A weather instrument is shown below. Which weather variable is measured by this instrument? 1) wind speed 3) cloud cover 2) precipitation 4) air pressure 2. Which weather station
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation 1
Designation: D 95 99 e1 An American National Standard American Association State Highway Transportation Standard AASHTO No. T55 Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 10.5
Module 1: History of Fuels. Lecture 6: Fundamental definitions, properties and various measurements
1 P age Module 1: History of Fuels Lecture 6: Fundamental definitions, properties and various measurements 2 P age Keywords: Characterisation, analytical methods, standards 1.3 Fundamental definitions,
CHAPTER 2: LIQUID VISCOSITY MEASUREMENT
CHAPTER 2: LIQUID VISCOSITY MEASUREMENT Objective Calculate viscosity (dynamic or absolute, and kinematic) and determine how this property varies with changes in temperature for a constant-composition
A H M 531 Penetration & Ring & Ball & Ductility & Flash & Fire point By: Mu'men Al-Otoom
The Civil Engineering Center 1 Visit www.ahm531.com for more lecture notes and E-book! The Civil Engineering Center 2 Visit www.ahm531.com for more lecture notes and E-book! Introduction : The grades of
Shimadzu Simulated Distillation Gas Chromatograph System C184-E030
Shimadzu Simulated Distillation Gas Chromatograph System C184-E030 Meets All Simulated Distillation Gas Chromatograph Standards - Provides Highly Accurate Analysis Results with Excellent Reproducibility-
EXPERIMENT 1 (Organic Chemistry I)
EXPERIMENT 1 (Organic Chemistry I) Melting Point Determination Purpose a) Determine the purity of a substance using melting point as physical property b) Identify an unknown compound using its melting
TEMPERATURE 2008, 2004, 1990 by David A. Katz. All rights reserved.
TEMPERATURE 2008, 2004, 10 by David A. Katz. All rights reserved. A BRIEF HISTORY OF TEMPERATURE MEASUREMENT Ancient people were physically aware of hot and cold and probably related temperature by the
This document establishes MSHA s Standard Test Procedure (STP) for the Determining the Viscosity of a Hydraulic Fluid in Saybolt Universal Seconds.
DOCUMENT NO: ASTP 5005 VERSION: 2010-02-12 Page 1 of 9 1.0 PURPOSE This document establishes MSHA s Standard Test Procedure (STP) for the Determining the Viscosity of a Hydraulic Fluid in Saybolt Universal
Distillation Experiment
Distillation Experiment CHM226 Background The distillation process is a very important technique used to separate compounds based on their boiling points. A substance will boil only when the vapor pressure
Product Specifications
AVIATION FUEL QUALITY REQUIREMENTS FOR JOINTLY OPERATED SYSTEMS (AFQRJOS) Issue 26 4th Supersedes Issue 25 May 2011 This document has the agreement of: BP, Chevron, Eni, ExxonMobil, Kuwait Petroleum, Shell,
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer 1
Designation: D562 01 (Reapproved 2005) Standard Test Method for Consistency of Paints Measuring Krebs Unit () Viscosity Using a Stormer-Type Viscometer 1 This standard is issued under the fixed designation
Melting Point. Electrothermal PRODUCT SPECIFICATIONS OPERATION
M A N U A L M E L - T E M P THE LOWEST COST MELTING POINT APPARATUS FOUND ANYWHERE! Low cost unit Temperature range to 500 C Aluminum casting conducts and radiates heat uniformly to capillaries and thermometer.
INVESTIGATION ON DIESEL COLD FLOW PROPERTIES
INVESTIGATION ON DIESEL COLD FLOW PROPERTIES R.Dinkov*, D. Stratiev, D. Penev, G. Cholakov Chief Process Engineer Department., Lukoil Neftochim Bourgas JLC, Bulgaria, *e-mail:[email protected]
Lecture 9 Solving Material Balances Problems Involving Non-Reactive Processes
CHE 31. INTRODUCTION TO CHEMICAL ENGINEERING CALCULATIONS Lecture 9 Solving Material Balances Problems Involving Non-Reactive Processes Component and Overall Material Balances Consider a steady-state distillation
Created by: Beata Boguszewska ... Arrangements made by: 1. Hanna Laskowska. 2. Tadeusz Głos. I approve for applying From 05-03-2015.
1. The scope of TS 2. The application of the scope of TS 3. Division and designation 4. Requirements and research 4.1. General requirements 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant
Evolution of the Thermometer
Evolution of the Thermometer A thermometer is a device that gauges temperature by measuring a temperature-dependent property, such as the expansion of a liquid in a sealed tube. The Greco-Roman physician
1. The Determination of Boiling Point
1. The Determination of Boiling Point Objective In this experiment, you will first check your thermometer for errors by determining the temperature of two stable equilibrium systems. You will then use
Penetration. www.koehlerinstrument.com. www.koehlerinstrument.com. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
Module 3: Liquid Fossil Fuel (Petroleum) Lecture 17: Evaluation of crude
1 P age Module 3: Liquid Fossil Fuel (Petroleum) Lecture 17: Evaluation of crude 2 P age Keywords: Evaluation, characterization factor, TBP, ASTM, EFV 3.2 Evaluation of crude The assessment of a crude
Rusty Walker, Corporate Trainer Hill PHOENIX
Refrigeration 101 Rusty Walker, Corporate Trainer Hill PHOENIX Compressor Basic Refrigeration Cycle Evaporator Condenser / Receiver Expansion Device Vapor Compression Cycle Cooling by the removal of heat
CLEANING AND SANITIZING
CLEANING AND SANITIZING Cleaning and sanitizing procedures must be part of the standard operating procedures that make up your food safety program. Improperly cleaned and sanitized surfaces allow harmful
First Grade Unit A: PHYSICAL SCIENCE Chapter 1: Observing Solids, Liquids and Gases Lessons 1 to 5
First Grade Unit A: PHYSICAL SCIENCE Chapter 1: Observing Solids, Liquids and Gases Lessons 1 to 5 Physical Science Overview Materials (matter) come in different forms. Water can be rain falling (liquid)
Chapter 3: Separating Mixtures (pg. 54 81)
Chapter 3: Separating Mixtures (pg. 54 81) 3.2: Separating Mechanical Mixtures (PB Pg. 40 5 & TB Pg. 58 61): Name: Date: Check Your Understanding & Learning (PB pg. 40 & TB pg. 61): 1. What are four methods
The Effect of Long-Term Cold Storage on Biodiesel Blends
The Effect of Long-Term Cold Storage on Biodiesel Blends Final Report Daniel N. Pope Department of Mechanical and Industrial Engineering University of Minnesota Duluth November 26, 2007 University of Minnesota
01 2015 CIMAC Guideline
01 2015 CIMAC Guideline Cold flow properties of marine fuel oils By CIMAC WG7 Fuels This publication is for guidance and gives an overview regarding the assessment of risks associated with operating on
MINERAL OIL (MEDIUM VISCOSITY)
MINERAL OIL (MEDIUM VISCOSITY) Prepared at the 76 th JECFA, published in FAO JECFA Monographs 13 (2012), superseding specifications for Mineral oil (Medium and low viscosity), class I prepared at the 59th
Production of Diesel Fuel From Used Engine Oil
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:10 No:02 1 Production of Diesel Fuel From Used Engine Oil R.A Beg, M. R. I. Sarker, and Md. Riaz Pervez Abstract Due to scarcity
A Study of Matter. Video Notes
A Study of Matter Video Notes In this lesson you will: Define physical property, chemical property and chemical change. Describe the phases of matter. Label properties as physical or chemical. Label changes
3 Scotch-Seal TM. Tamper Proof Sealant 1252. Technical Data Issue No. 5
3 Scotch-Seal TM Technical Data Issue No. 5 Advantages 3M Scotch-Seal is a one-part, fast drying, antitamper sealer. Self-extinguishing. It can be applied over adjustable or removable parts to indicate
Notes. Material 1. Appropriate Flammable Liquids
29 CFR 1910.106 Flammable Materials Flammable Liquids Preparation 1. Read Applicable Background information and related Company Policy Chapter. 2. Make Copies of this Lesson Plan for Personnel 3. Make
Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) 1
Designation: D 2170 95 Designation: 319/84 (89) Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) 1 This standard is issued under the fixed designation D 2170; the number immediately
Test 5 Review questions. 1. As ice cools from 273 K to 263 K, the average kinetic energy of its molecules will
Name: Thursday, December 13, 2007 Test 5 Review questions 1. As ice cools from 273 K to 263 K, the average kinetic energy of its molecules will 1. decrease 2. increase 3. remain the same 2. The graph below
SECTION 1: GENERAL INFORMATION
Part 1B: Physical Chemical Properties of Selected Fuels SECTION 1: GENERAL INFORMATION DOT Number UN 1049 UN 1966 CH 4 8399%; C 2H 6 113% UN 1971 UN 1075 UN 1978 C 4C 12 C 8C 25 UN 1230 UN 1170 UN 1203
Pumping Fuel & Fuel Oil
Pumping Fuel & Fuel Oil Fuels & Rotary Pumps Though the handling of fuel oil is not necessarily "challenging," the reliable handling of fuel oils is critical for heating and transportation systems. Rotary
Calculating Volatile Organic Compounds (VOC) Flash Emissions from Crude Oil and Condensate Tanks at Oil and Gas Production Sites
Air Permit Reference Guide APDG 5942 Calculating Volatile Organic Compounds (VOC) Flash Emissions from Crude Oil and Condensate Tanks at Oil and Gas Production Sites Air Permits Division Texas Commission
Control Device Requirements Charts For Oil and Gas Handling and Production Facilities
Device Charts For Oil and Gas Handling and Production Facilities Purpose/Scope: The purpose of this document is to provide standardized guidance for use by the regulated community and air permit reviewers,
FederalDemocratic RepublicofEthiopia
FederalDemocratic RepublicofEthiopia EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety, equaljusticeforal,abeterinformedcitizenry,therule oflaw,worldtradeandworldpeace,thislegaldocumentis
1.1 This test method covers the qualitative and quantitative determination of the content of benzene and toluene in hydrocarbon wax.
Standard Method for Analysis of Benzene and Toluene Content in Hydrocarbon Waxes by Headspace Gas Chromatography EWF METHOD 002/03 (Version 1 Reviewed 2015) 1 Scope 1.1 This test method covers the qualitative
14 Friedel-Crafts Alkylation
14 Friedel-Crafts Alkylation 14.1 Introduction Friedel-Crafts alkylation and acylation reactions are a special class of electrophilic aromatic substitution (EAS) reactions in which the electrophile is
VISCOSITY CLASSIFICATIONS
VISCOSITY CLASSIFICATIONS INDUSTRIAL LUBRICANT CASSIFICATIONS ISO (International Standards Organisation) viscosity classification The ISO viscosity classification uses mm 2 /s () units and relates to viscosity
Clifton Food Range Bath Choice Booklet
Clifton Food Range Bath Choice Booklet Choosing the right equipment for you. - Nickel-Electro Ltd 2012. All rights reserved. Nickel-Electro Ltd., Oldmixon Crescent, Weston-s-Mare, North Somerset, BS24
Analytical Standards and CRMs for the Petroleum Industry
Analytical Standards and CRMs for the Petroleum Industry Dr. Lisa Fitzpatrick EMEA Tactical Marketing Manager, LT&D. sigma-aldrich.com 2013 Sigma-Aldrich Co. LLC. All rights reserved. Brands and WW Product
Gas Detection for Refining. HA University
Gas Detection for Refining HA University Refinery Process and Detection Needs Refining i Crude Oil Final Products Coke Asphalt Waxes, Lubricating Oils and Greases Kerosene, Jet Fuel, Diesel Fuel, Home
Flammable and Combustible Liquids. Slide 1 (of 23)
Flammable and Combustible Liquids Slide 1 (of 23) Introduction The two primary hazards associated with flammable and combustible liquids are explosion and fire Safe handling and storage of flammable liquids
David O. Ahrens, Commercial Marine Manager Caterpillar Engine Products Division
Caterpillar Inc. Cat Marine Power Diesel fuel feature story 187-P-2-004-98 Special to Seaway Review HEADLINE: BYLINE: Fuel for Thought David O. Ahrens, Commercial Marine Manager Caterpillar Engine Products
Standard Test Methods for Viscosity of Adhesives 1
Designation: D 1084 97 Standard Test Methods for Viscosity of Adhesives 1 This standard is issued under the fixed designation D 1084; the number immediately following the designation indicates the year
Penetration. www.koehlerinstrument.com. www.koehlerinstrument.com. www.labomat.eu. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
ShellSol D60. Shell Chemicals. Data Sheet. Lemont, IL Cotton Valley, LA. Product Name
Shell Chemicals Data Sheet Product Name ShellSol D60 This product is manufactured at more than one production site. The sales specifications of these products are the same, some typical data however may
Engineering Recommendation on: Accumulators Revised 6-17-99 Issued January 10, 1979 Page 1 of 7
Issued January 10, 1979 Page 1 of 7 Accumulators have long been recognized by the industry as an effective means of maintaining good system balance by storing excess refrigerant as the condenser or evaporator
ESSAY. Write your answer in the space provided or on a separate sheet of paper.
Test 1 General Chemistry CH116 Summer, 2012 University of Massachusetts, Boston Name ESSAY. Write your answer in the space provided or on a separate sheet of paper. 1) Sodium hydride reacts with excess
Materials 10-mL graduated cylinder l or 2-L beaker, preferably tall-form Thermometer
VAPOR PRESSURE OF WATER Introduction At very low temperatures (temperatures near the freezing point), the rate of evaporation of water (or any liquid) is negligible. But as its temperature increases, more
Viscosity. www.koehlerinstrument.com. Test Methods
Viscosity Test Methods Page Kinematic Viscosity of Transparent and Opaque Liquids ASTM D445; IP 71; ISO 3104; DIN 51550; FTM 791-305...2-13 Kinematic Viscosity of Asphalts (Bitumens) ASTM D2170...2-13
1 Introduction The Scientific Method (1 of 20) 1 Introduction Observations and Measurements Qualitative, Quantitative, Inferences (2 of 20)
The Scientific Method (1 of 20) This is an attempt to state how scientists do science. It is necessarily artificial. Here are MY five steps: Make observations the leaves on my plant are turning yellow
WIKA INSTRUMENT CORPORATION
WIKA INSTRUMENT CORPORATION Instruction Manual GAUGE PRESSURE INDICATOR Series 1500 Series 1000 Series 300 WIKA Instrument Corporation 1000 Wiegand Boulevard Lawrenceville, GA 30043 1-888-945-2872 http://www.wika.com
Series MJC Multiple Jet Controls DN20, DN25, DN40, and DN50, 12 bar BSPT Inlet & Outlets Threads General Description.
Worldwide Contacts www.tyco-fire.com Series Multiple Jet Controls DN20, DN25, DN40, and DN50, 2 bar BSPT Inlet & Outlets Threads General Description The TYCO Series Multiple Jet Controls are control valves
NFPA31FuelOilPiping 1 Revised 3-1-11
NFPA 31 Fuel Oil Piping, Installation and Testing Chapter 8 Fuel Piping Systems and Components 8.1 Scope. This chapter shall apply to piping systems and their components used to transfer fuel oil from
1. The Kinetic Theory of Matter states that all matter is composed of atoms and molecules that are in a constant state of constant random motion
Physical Science Period: Name: ANSWER KEY Date: Practice Test for Unit 3: Ch. 3, and some of 15 and 16: Kinetic Theory of Matter, States of matter, and and thermodynamics, and gas laws. 1. The Kinetic
PRODUCT DATA SHEET DESCRIPTION:
DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.
Household Hazardous Wastes
Household Hazardous Wastes Household Hazardous Wastes (HHW) are products used in your home, workplace and places of leisure and recreation. They can be flammable, corrosive, explosive or toxic, and harmful
KINDERGARTEN WATER 1 WEEK LESSON PLANS AND ACTIVITIES
KINDERGARTEN WATER 1 WEEK LESSON PLANS AND ACTIVITIES WATER CYCLE OVERVIEW OF KINDERGARTEN WEEK 1. PRE: Defining the states of matter. LAB: Discovering the properties of water. POST: Analyzing the water
SPECIFICATION DIVISION 22 SECTION DESCRIPTION DIVISION 22 PLUMBING SECTION 220519 - THERMOMETERS, PRESSURE GAUGES, AND ACCESSORIES
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
Midland Combustion Electric Line Heaters with Integral Panels
Midcom Electric Line Heaters are available to work with even the most difficult oils and process fluids when there is no other heating medium available. High viscosity crude oils as well as coal tar, bitumen,
Fully Automated Distillation of Petroleum Products including Biofuels OptiDist - the Optimal Solution
Fully Automated Distillation of Petroleum Products including Biofuels OptiDist - the Optimal Solution The evaporating characteristics of hydrocarbons have an important effect on their performance. The
Technical Note: Conversion of fuel data to MWh
Technical Note: Conversion of fuel data to MWh Questions 12.2 and 12.3 of the information request ask for energy and fuel inputs to be reported according to standardized units commonly used for measuring
Hedonic prices for crude oil
Applied Economics Letters, 2003, 10, 857 861 Hedonic prices for crude oil Z. WANG Department of Economics, Monash University, PO Box 197, Caulfield East, Victoria 3145, Australia Email: [email protected]
Thermal Values. Melting-, Dropping- and Softening Point Simple, fast and reliable
Thermal Values Melting-, Dropping- and Softening Point Simple, fast and reliable 216 Page Melting Point 218 219 Dropping and Softening Point 220 221 217 Melting Point Determine the Melting Point With Just
1. At which temperature would a source radiate the least amount of electromagnetic energy? 1) 273 K 3) 32 K 2) 212 K 4) 5 K
1. At which temperature would a source radiate the least amount of electromagnetic energy? 1) 273 K 3) 32 K 2) 212 K 4) 5 K 2. How does the amount of heat energy reflected by a smooth, dark-colored concrete
Certificate of Compliance Section 1 - PRODUCT AND COMPANY IDENTIFICATION
Certificate of Compliance & Material Safety Data Sheet For Health Emergencies: CALL A POISON CONTROL CENTER For Transportation Emergencies ONLY: Call Chem-Tel USA, Canada, Puerto Rico, US Virgin Islands:
Scholars Research Library
Available online at www.scholarsresearchlibrary.com Scholars Research Library Archives of Physics Research, 2010, 1 (2):103-111 (http://scholarsresearchlibrary.com/archive.html) ISSN 0976-0970 Lubricating
Determination of Viscosity Using A Brookfield Viscometer for Conditioning Polymers
LUBRIZOL TEST PROCEDURE TP-N01004 Edition: December 2, 2013 Previous Editions: August 10, 2000 / November 1, 2011 Determination of Viscosity Using A Brookfield Scope A material's flow property is an important
ENVIRONMENTAL LABORATORY APPROVAL PROGRAM CERTIFICATION MANUAL
1 of 8 The quality assurance plan as presented in the Quality Manual should assure that constant and consistent test conditions are met and verified and should be tailored to the laboratory s activities.
AC DHA Solutions. Detailed Hydrocarbon Analysis of Light Petroleum Streams & Light End in Crude Oils. ASTM D 5134, D 6729, D 6730, D 6733 Compliance
AC DHA Solutions Detailed Hydrocarbon Analysis of Light Petroleum Streams & Light End in Crude Oils ASTM D 5134, D 6729, D 6730, D 6733 Compliance Signal Alignment Automated with LineUp TM Tool Compatible
E-gas Instant Gas Water Heaters
The Proven Preferred Choice! E-gas Instant Gas Water Heaters Training & Information Manual: There are important functional and operational differences between the conventional hot water geyser and the
Project I Measuring Temperature and Newton s Law of Cooling
Project I Measuring Temperature and Newton s Law of Cooling 1 Instructions Read through the project and work through all the questions. It is important that you work through everything so that you can
Chemistry 13: States of Matter
Chemistry 13: States of Matter Name: Period: Date: Chemistry Content Standard: Gases and Their Properties The kinetic molecular theory describes the motion of atoms and molecules and explains the properties
ISANE Isoparaffin Products
ISANE Isoparaffin Products High Product Purity The Isane range is a unique range of products that is characterized by a high purity level, low odor, low surface tension, and relative chemical inertness.
CRG CONSERVE RESOURCES GROUP ECO ENVIRONMENTAL ENGINEERING TECHNOLOGIES. NEW State of the Art. Advanced OIL REFINERY TECHNOLOGY & PROCESSES
NEW State of the Art Advanced OIL REFINERY TECHNOLOGY & PROCESSES TABLE OF CONTENTS Introduction ( Part 1 ) Comparison Advantages Information Appendix Result of Fraction Refinery Economic indicator + Supporting
Specific Heat (slope and steepness)
1 Specific Heat (slope and steepness) 10 pages. According to the Physical Science text book, the Specific Heat of a material is DEFINED as the following: Specific heat is the amount of heat energy required
Chapter 1 Chemistry: The Study of Change
Chapter 1 Chemistry: The Study of Change This introductory chapter tells the student why he/she should have interest in studying chemistry. Upon completion of this chapter, the student should be able to: