indoor air quality and energy saving TECHNICAL DATA HRE-TOP EC VENTILATION UNIT WITH HEAT RECOVERY FOR COMMERCIAL AND INDUSTRIAL BUILDINGS

Size: px

Start display at page:

Download "indoor air quality and energy saving TECHNICAL DATA HRE-TOP EC VENTILATION UNIT WITH HEAT RECOVERY FOR COMMERCIAL AND INDUSTRIAL BUILDINGS"

Vivien Rodgers
7 years ago
Views:

1 indoor air quality and energy saving TECHNICAL DATA HRE-TOP EC VENTILATION UNIT WITH HEAT RECOVERY FOR COMMERCIAL AND INDUSTRIAL BUILDINGS

2 HRETOP-EC Non-residential ventilator unit ith dual flo and high yield heat recovery. PERFORMANCE Equipped ith counter current heat exchanger in aluminium (Eurovent certified) and electronic backard blade ventilators. The total bypass as standard allos favourable climatic conditions to be taken advantage of outside the building for free cooling (or free heating) in automatic mode. STRUCTURE HRETOP-EC is manufactured using a profiled extruded aluminium frame and 36 mm thick sandich panels, insulated in polyurethane foam. The panels and inner parts are manufactured in Aluzinc, material that ensures high strength against corrosion and oxidation. A pair of panels ith hinged opening eases access to the filters (F7 for the reneed air flo and M5 for the extraction air flo). HRETOP-EC is prepared for installation outdoors (ith an optional, specific protective roof) and indoors; it is supplied ith 1 mm high aluminium bases for installation on the floor. Available in 5 sizes, it can be equipped ith air post-treatment systems (inside the unit) such as: hot/cold ater battery, electrical heater or direct expansion battery. CONTROLS HRETOP-EC as supplied ith an electric box and control system; it is available in a version equipped ith EVO-PH control and a version equipped ith EVOD-PH-IP control prepared for complete integration in home automation systems (Modbus protocol ith Ethernet connection or, on request, ith the addition of connection RS485). The ne version of our control systems enables extremely easy and rapid passage from a control system to another, even after installation ith the single replacement of the remote panel. The EVO-PH control has a coloured, backlit touch screen interface ith intuitive vieing of the orking status of the machine. It enables precise adjustment of ventilator speed and has a eekly, time schedule for automatic management of the ventilators. It can be controlled by an external sitch to activate the booster function, it can automatically adjust the air flo rate if connected to an air quality probe, it can manage any air post treatment accessories, it automatically manages the bypass and prevents heat exchanger freezing by managing the speed of the ventilators or, if installed, an electrical pre-heating resistor (optional accessory outside the machine); it signals to the user the need to replace the filters (the clogging status of the filters is monitored by a pair of different pressure sitches, supplied as standard) or an anomaly, indicating the origin. With the addition of optional accessories (COP kit and CAV kit installed on the channel) you can manage the ventilation machine in constant pressure or constant flo rate mode. The EVOD-PH-IP control has the same characteristics as the EVO-PH version ith the addition of Modbus communication protocol hich allos full control of the machine by the supervision softare of the home automation system. The implemented ebserver allos interaction ith the machine, even ith an internet broser of a device connected (even from remote) to the home automation system in hich the machine is inserted. For a more complete vie of the characteristics of the control panels, please read the specific manuals expulsion air supply air fresh air exhaust air 2

The total bypass as standard allos favourable climatic conditions to be taken advantage of outside the building for free cooling (or free heating) in automatic mode.

3 PERFORMANCE (UNI EN ) [Pa] Max Min Max. portata Min. portata Max Serie1 Min Serie2 Portata Air flo d'aria [m³/s] 3 /s],,1,1,2,2,3,3 6 5 The unit must be ducted properly: UTEK authorizes the use only according to its performance diagram shon into this catalogue The claimed performances are guaranteed only by UTEK original filter lo pressure loss HRE-TOP 1 EC Variable flo (VAV) Poer Poer [W] Air flo [m³/h] HRE-TOP 2 EC Variable flo (VAV) Poer Max Min Max. portata Min. portata Max Serie1 Min Serie2 Portata Air flo d'aria [m³/s] [m3/s],,1,2,3,4,5, [Pa] Poer [W] Air flo [m³/h] 3

performance diagram shon into this catalogue The claimed performances are guaranteed only by UTEK original filter lo pressure loss HRE-TOP 1 EC Variable flo (VAV)

4 PERFORMANCE (UNI EN ) The unit must be ducted properly: UTEK authorizes the use only according to its performance diagram shon into this catalogue The claimed performances are guaranteed only by UTEK original filter lo pressure loss [Pa] HRE-TOP 3 EC Variable flo (VAV) Poer Max. Max portata Min Min. portata Max Serie1 Min Serie2 Air flo [m³/s] Portata d'aria [m3/h],,1,2,3,4,5,6,7,8, Poer [W] Air flo [m³/h] HRE-TOP 4 EC Variable flo (VAV) Poer Max Min Max Min Max. portata Min. portata Portata Air flo d'aria [m³/s] [m3/h] Serie1 Serie2,,2,4,6,8 1, 1, [Pa] Air flo [m³/h] 4 Poer [W]

portata Max Serie1 Min Serie2 Air flo [m³/s] Portata d'aria [m3/h],,1,2,3,4,5,6,7,8,9 8 7 6 16 14 12 Poer [W] 5 1 4 8 3 6 2 4 1 2 5 1 15 2 25 3 35 Air flo [m³/h] HRE-TOP 4 EC

5 PERFORMANCE (UNI EN ) The unit must be ducted properly: UTEK authorizes the use only according to its performance diagram shon into this catalogue The claimed performances are guaranteed only by UTEK original filter lo pressure loss (Pa] HRE-TOP 5 EC Variable flo (VAV) Poer Max Min Max Min Portata Air flo d'aria [m³/s] Max. portata Min. portata 3 /h] Serie1 Serie2,,2,4,6,8 1, 1,2 1,4 1,6 1, Poer [W] Air flo [m³/h] HEAT RECOVERY PERFORMANCE (sensible efficiency) Values refered to the folloing conditions (UNI EN ): Tbs external air 5 C; U.R. esternal 72%; Tbs enviorment 25 C; U.R. enviorment 28% HRE 2 EC HRE 3 EC HRE 45 EC HRE 6 EC HRE 1 EC Air flo [m 3 /s],,2,4,6,8 1, 1,2 1,4 1,6 1,8 1 1, 95 95, 9 9, Efficiency [%] , 8, 75 75, 7 7, Air flo[m 3 /s] 5

portata 3 /h] Serie1 Serie2,,2,4,6,8 1, 1,2 1,4 1,6 1,8 1 9 8 7 6 5 4 3 2 1 4 36 32 28 24 2 16 12 8 4 Poer [W] 1 2 3 4 5 6 7 Air flo [m³/h] HEAT RECOVERY PERFORMANCE (sensible efficiency) Values

6 MOD. t_nvru [%] nom [m³/s] s,ext SFPint SFPint_lim 216 SFPint_lim 218 FRONT P[Pa] s,int [W/(m³/s)] [W/(m³/s)] [W/(m³/s)] VELOCITY[m/s] [Pa] Fan [%] HRETOP-EC 1 81,3,24 2, , ,8% HRETOP-EC 2 81,,5 2, , ,7% HRETOP-EC 3 8,6,79 2 1, , ,% HRETOP-EC 4 81,8, , , ,4% HRETOP-EC 5 * Percentage of the nominal flo ECODESIGN *internal LEAKAGE 8,8 1,55 2 2, , ,1% 3,8% 2,5% 5,8% 5,2% 4,7% 4,9% *external LEAKAGE 3,7% 4,3% 2,9% 2,7% TEST LEAKAGE (UNI EN ) LEAKAGE OUTDOOR OUTDOOR INDOOR TEST CONDITIONS Positive pressure 25 Pa Negative pressure 25 Pa difference 1 Pa LEAKAGE CLASSIFICATION HRE TOP-EC 1 HRE TOP-EC 2 HRE TOP-EC 3 HRE TOP-EC 4 HRE TOP-EC 5 A3 A1 A1 A1 HRE TOP-EC 1 NOISE LEVE L Sound poer level taken in accordance to UNI EN ISO CLASS Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz 65 59,8 47,7 46,3 42,8 3,9 24,2 L db(a) 54,9 HRE TOP-EC 1 HRE TOP-EC 2 HRE TOP-EC 2 HRE TOP-EC 3 HRE TOP-EC 3 HRE TOP-EC 4 HRE TOP-EC 4 HRE TOP-EC 5 HRE TOP-EC Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 72,1 66,2 56,4 54,8 53, ,2 62,6 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 74,3 68,9 49, ,7 33,3 62,7 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 76, ,7 62,5 57,7 5,3 38,8 67,2 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 74, ,1 53,7 46,5 41,1 35,7 65,4 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 79,9 74,9 72,9 68,7 62,2 57,4 49,2 74,2 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 77,3 77,8 65,4 63,9 56,2 48,3 42,5 71,6 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 79,3 78,1 73,8 73,5 7, , Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 82,6 77,1 62, ,8 34,9 71,3 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz L db(a) 82,8 82,2 71,4 72,4 63,5 54, ,4 6

nominal flo ECODESIGN *internal LEAKAGE 8,8 1,55 2 2,95 1256 1381 111 2,48 982 65,1% 3,8% 2,5% 5,8% 5,2% 4,7% 4,9% *external LEAKAGE 3,7% 4,3% 2,9% 2,7% TEST LEAKAGE (UNI EN 13141-7) LEAKAGE OUTDOOR

7 A A E Ø B C E ELECTRICAL DATA MATCHING FANS UNIT HRE TOP-EC Poer Supply Current max.(23 V) Insulation class Supply Current max. Insulation class HRE TOP-EC 1 2 x 17 W 23V 5/6 Hz 1F 2 x 1,4 A IP54 CLASSE B 23V 5 Hz 1F 3, A IP 2 HRE TOP-EC 2 2 x 448 W 23V 5/6 Hz 1F 2 x 2,8 A IP54 CLASSE B 23V 5 Hz 1F 6, A IP 2 HRE TOP-EC 3 2 x 715 W 23V 5/6 Hz 1F 2 x 3,1 A IP54 CLASSE B 23V 5 Hz 1F 6,8 A IP 2 HRE TOP-EC 4 2 x 14 W 23V 5/6 Hz 1F 2 x 6, A IP54 CLASSE B 23V 5 Hz 1F 12,6 A IP 2 HRE TOP-EC 5 2 x 185 W 4V 5/6 Hz 3F 2 x 2,9 A IP54 CLASSE B 4V 5 Hz 3F 6,4 A IP 2 DIMENSIONS (mm) WEIGHT (kg) MOD. A B C D E S Ø WEIGHT HRE-TOP EC /2" HRE-TOP EC /2" HRE-TOP EC /2" 4 32 HRE-TOP EC /2" 5 53 HRE-TOP EC /2" 56 6 D A S INSTALLATION FLOOR INSTALLATION Minimum required space for maintenance (mm) C D C B MODEL A B C HRE-TOP EC HRE-TOP EC HRE-TOP EC HRE-TOP EC HRE-TOP EC D E

715 W 23V 5/6 Hz 1F 2 x 3,1 A IP54 CLASSE B 23V 5 Hz 1F 6,8 A IP 2 HRE TOP-EC 4 2 x 14 W 23V 5/6 Hz 1F 2 x 6, A IP54 CLASSE B 23V 5 Hz 1F 12,6 A IP 2 HRE TOP-EC 5 2 x 185 W 4V 5/6 Hz 3F 2 x 2,9 A

8 STANDARD SIPHON 185 Ø Ø 32 8

9 Dear Customer Thanks for your attention to the product UTEK, designed and manufactured to ensure the real values to the User : Quality, Safety and Savings on orking. UTEK S.r.l. Made in italy UTEK reserves the right to at any time the necessary changes to improve products ithout prior notice. the Dealer HRE TOP-EC_216 EN VENTILATION UNIT WITH HEAT RECOVERY FOR COMMERCIAL AND INDUSTRIAL BUILDINGS UTEK S.r.l. Via Provinciale,3 233 Mazzo di Valtellina (So) Italy Tel Fax utek-air.it utek@utek.it

the Dealer HRE TOP-EC_216 EN VENTILATION UNIT WITH HEAT RECOVERY FOR COMMERCIAL AND INDUSTRIAL BUILDINGS UTEK S.r.l. Via Provinciale,3 233 Mazzo di Valtellina (So) Italy Tel.

FLAT TECHNICAL DATA. HEAT RECOVERY VENTILATION UNITS for RESIDENTIAL BUILDINGS. indoor air quality and energy saving ENERGY CLASS B A A B A A UNIT

FLAT TECHNICAL DATA. HEAT RECOVERY VENTILATION UNITS for RESIDENTIAL BUILDINGS. indoor air quality and energy saving ENERGY CLASS B A A B A A UNIT indoor air quality and energy saving TECHNICL DT UNIT FLT 1 FLT 2 CONTROL CTR08-PH EVO(D)-PH EVO(D)-PH + CO 2sensor CTR08-PH EVO(D)-PH EVO(D)-PH + CO 2 sensor ENERGY CLSS + C D E F G FLT HET RECOVERY VENTILTION