SolidWorks Building Blocks Tutorial. Toy-car
|
|
|
- Shona McKenzie
- 7 years ago
- Views:
Transcription
1 SolidWorks Building Blocks Tutorial Toy-car From the age of until the age of For use with SolidWorks Educational Release
2 This tutorial was developed for SolidWorks Worldwide and may be used by anyone who needs to learn how to use the SolidWorks 3D CAD software. Any other use of this tutorial or any portion there of is prohibited. For any questions on this matter, please contact Jack van den Broek. Initiative: Jack van den Broek (Technical school Dr. Knippenberg). Adaptation to the educational level: Jack van den Broek. Realized by: Jack van den Broek. We ll turn this pile of building blocks into a Toy Car! You won t be alone; I ll help you by showing how to assemble the different pieces. Have fun! Work plan: Follow the instructions on the left side of the tutorial and always check the examples on the right side. Read carefully, and nothing can go wrong. Good luck! 1 Start SolidWorks: To do so, double-click the icon This icon is on your desktop. If it s not on your desktop, ask your teacher for help! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 2
3 2 If all goes well, the drawing application will open. It will look as in the illustration opposite. 3 You are now going to open the assembly environment and will build your first model. 1. To do so, click the first button on the toolbar: New When the menu is displayed, double-click: Double-click this item: Assembly is a synonym of to build or to construct SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 3
4 5 If all has gone well again, the screen will look as displayed opposite. That s where we will build our Toy Car. We ll start with the bottom. It s already been built, but it is still in the warehouse. 1. To have a look in the warehouse, we click: 1 6 Locate the file: chassis.sldasm 1. Double-click the icon! 7 The chassis will now be displayed onscreen, but it still sticks to your mouse! So you ll have to release it! 1. Therefore, click OK. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 4
5 8 Once you ve done that, the chassis is positioned exactly in the middle of the screen. We can now continue our construction (assembly). We're going back to the warehouse to retrieve the new parts. 1. First, click: Cancel! 9 1. Press the left mouse button: To have a look in the ware house, please click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 5
6 11 Double-click: Level2.sldasm Which is in this combination! Position the part as illustrated opposite and click the left mouse button We ll now rotate the part such that it s almost OK. 1. Click the arrow below: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 6
7 14 This command allows us to rotate the part! 2. Click the nose to make it blue! Press and hold the left mouse button You can now rotate the part. Rotate and move the mouse until the part is positioned as illustrated opposite Once you re finished, click OK. That s the green check mark! 16 We will now build the two parts on top of each other! 1. Click Mate: This looks like a paperclip. This command allows you to put building blocks onto each other. (mounting) (constructing). SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 7
8 17 1. Click the front of the nose and it will turn blue. You don t see things well? Use the scroll wheel to zoom in or out. 2. Click the front of the chassis and it will turn blue as well. These fronts now must lie flush To confirm this, click: Click on the side of the upper part, it will turn blue again. 2. Click on the side of the chassis, it will become blue as well. 3. These fronts now must lie flush. 4. To confirm this, click: Click on the top of the lower part, it will turn blue again. 2. Press and hold the mouse s scroll wheel, and move the mouse. Try to put everything upside down! 1 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 8
9 20 You may incidentally turn the scroll wheel too much and possibly loose everything. YOU DON T SEE ANYTHING ANYMORE!! No worry! Zoom to Fit. 21 Everything will get back to normal again, at the same place as before Now click the bottom of the upper part. It will turn blue again and both parts will immediately connect together. 23 Let's save our data for the sake of safety! Click Save and name the file Tony-Kart. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 9
10 24 We ll go back again to the warehouse, to see if we can find any front wheels. 1. Click Browse to return to the warehouse. Let s search!!! Left wheel mount.sldasm Double-click this wheel If all went well, your screen now displays the frame and the left front wheel, as illustrated opposite. 26 We ll return to the warehouse to see if we can find the other front wheel. 1. Click Browse to return to the warehouse. Let s search!!! Right wheel mount.sldasm Double-click this wheel as well. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 10
11 27 If all went well, your screen now displays the frame and both front wheels, as illustrated opposite But we also notice the right front wheel is not correctly positioned. We ll have to turn it again, as we did before. 2. Click the following button again: 28 This command allows us to rotate the part! 1. Click somewhere on the holder to make it blue! 1 Press and hold the left mouse button. 29 You can now rotate the part Rotate and move the mouse until the part is positioned as illustrated opposite. 1. Once you re finished, click OK. That s the green check mark! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 11
12 Click Mate again: We now return to the construction environment. 1. Click the side of the hole, it will turn blue again Click the side of the hole in the lower holder, it will turn blue again. You ll now see that both parts lie flush. 2. Here's the proof! 2 3. To confirm this, click: 3 1 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 12
13 33 1. Click on the top of the lower part, it will turn blue again. 2. Press and hold the mouse s scroll wheel, and move the mouse. Try to put everything upside down! See the next step Now click the bottom of the upper part. It will turn blue again and both parts will immediately connect together Click OK: to confirm. Let's save our data once again for the sake of safety! Click Save! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 13
14 36 1. Click Mate: We ll now put both holder arms in the same position. 2. Click the left holder arm. 3. Click the right holder arm. 37 This command puts both holder arms in the same position. 2. Click OK Click OK: To close the Mate function. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 14
15 39 We now return to the warehouse, for new parts. Insert Components. Browse 40 We're looking for: 1x 1x 1x 1x Click Mate: Click in the middle of the image, and watch the dot you should see. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 15
16 42 1. Click on top of the middle of the nose. We re still working within the environment of the mate function, so we simply continue You can see that both parts are now connected. You can also see they re not straight. 1. Click the first side surface! 2. Click the second side surface! 3. Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 16
17 44 1. Click Mate: Click the hole in the middle of the model Click the hole in the middle of the steering axle 46 You ll now see that both holes are aligned. 1. Click OK. 1 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 17
18 47 We re still in the MATE environment, so we ll simply continue. We now repeat the previous command for the left side. 2. Click OK We ll fix the part to the chassis. 1. Click the Chassis, and please check: its color must change Press and hold the mouse s scroll wheel, and move the mouse. 3 Try to put everything upside down! 2. Click the bottom surface of the part. 3. Click OK. 2 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 18
19 50 We ll now make flush both upper parts. The upper side of the image. 2. Click the upper side of the control stick. 3. Click OK: As we re still in the MATE environment, we can simply continue. We ll now continue to build the nose Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 19
20 53 3. Click OK: Press and hold the mouse s scroll wheel and move the mouse. Try to put everything upside down! 2. Click the bottom surface of the part. 3. Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 20
21 Click OK: 58 Middle point Upper edge SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 21
22 59 1. Click OK: Press and hold the mouse s scroll wheel and move the mouse. Try to put everything upside down! 2. Click the bottom surface of the part. 2 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 22
23 62 1. Click OK: 2. Close the MATE function. 2 1 Click OK: Let's save our data once again for the sake of safety! Click Save. 63 We now return to the warehouse, for new parts. Insert Components. Browse 64 We're looking for: 2x Double-click it: Do this twice: And position both parts as illustrated opposite! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 23
24 65 If all went well, your screen now displays the frame and both new parts, as illustrated opposite. But we also see both parts are positioned wrongly. We ll rotate both parts, as we did before. 2. Click the head and hold the left mouse button. You can now rotate the part. 66 We ll now shift the parts! Move Component. 2. Click the part and press and hold the left mouse button. You can now shift the part. 67 We re going to build again! 1. Click Mate. 3. Click: 4. Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 24
25 68 We re still in the MATE environment, so we ll simply continue! 3. Click: Press and hold the mouse s scroll wheel, and move the mouse. Try to put everything upside down! 2. Click the bottom surface of the part Press and hold the mouse s scroll wheel, and move the mouse. Make sure everything is positioned normally again! 2. Click the upper surface of the part. 3. Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 25
26 71 3. Click: 4. Click OK: The Mate function is now closed 72 Let's save our data once again for the sake of safety! Click Save! 73 Press the scroll wheel and rotate the model!! See the example opposite!! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 26
27 74 1. Click Mate: Continue using what you just learned in the previous steps. 2. Click the right places! 3. Click OK on time: 4. Try to make everything as illustrated opposite, then close MATE. 75 We now return to the warehouse, for new parts. Insert Components. Browse 76 We're looking for: Position the parts as illustrated opposite! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 27
28 77 Mate. 3. Click: Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 28
29 Press and hold the mouse s scroll wheel, and move the mouse. Try to put everything upside down! 2. Click the bottom surface of the part Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 29
30 83 We re still in the MATE environment, so we ll simply continue! 3. Click OK: Click OK: Half of the part now has been aligned! 85 Rotate the model and repeat on the other side. Use the Mate function you ve learned to use in the previous step (84)! To better see everything! Use the scroll wheel. Zoom in Zoom out SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 30
31 86 1. Press and hold the mouse s scroll wheel, and move the mouse. Try to put everything upside down! 2. Click the bottom surface of the part Press and hold the mouse s scroll wheel, and move the mouse. Make sure everything is positioned normally again! 2. Click the upper surface of the part You now see the part is positioned correctly. 2. Click OK: Let's save our data once again for the sake of safety! Click Save: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 31
32 89 We ll now test if the steering section functions correctly. 1. Click the edge with the left mouse button. Hold the mouse button. And move the mouse from left to right If you ve done everything correctly, the wheels should be moving! We now return to the warehouse, for new parts. 3. We're looking for: 1x 2x 2x 91 Zoom in if necessary! 3. Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 32
33 92 The axle will fit into the hole! All went well 1. Click OK: 2. Pick up the axle with the left mouse button and shift it approximately to the middle of the chassis. 93 We re still in the MATE environment, so we ll simply continue! 94 The following will happen. 1. We ll now set the distance from the axle. 2 Distance 3 3. Enter here the size of 24mm! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 33
34 Click OK: 2. The axle now is set at a fixed size in the chassis! Have you made an error? 3. Click: And repeat step (93-94)! 96 We re still in the MATE environment, so we ll simply continue! 1. Pick it up with the left mouse button: 1 2 move to: 2. Pick it up with the right mouse button Move and rotate it to: 97 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 34
35 98 This is the final result! We ll now move the spacer bush: 1. Pick it up with the left mouse button: 2 move to: Press and hold the mouse s scroll wheel, and move the mouse. Refer to the example on the next page: 100 The keyway now is correctly positioned. Zoom out again. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 35
36 101 We re still in the MATE environment, so we ll simply continue! Make sure to click the edge!!!! 102 You ll see that both parts are nicely connected together. Let's save our data once again for the sake of safety! Click Save: Press and hold the mouse s scroll wheel, and move the mouse. 2. Make sure the model is positioned on screen as illustrated opposite. 3. Do the same with the spacer bush, make sure it also is at the axle! You don t remember how? Repeat steps 96 through 102. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 36
37 Zoom in as in the example opposite. We ll now test if the axle is able to turn. 2. Click the edge with the left mouse button. Hold the mouse button. And move the mouse from left to right. If you ve all done as it should, the axle should be moving!! Close the MATE function: 106 We now return to the warehouse, for new parts. 3. We're looking for: 1x Rollbar.sldasm 1x Rollbar2.sldasm SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 37
38 Click with the right mouse button and rotate until: see opposite! 2. Click with the right mouse button and rotate until: see opposite! 108 Zoom in if necessary! 3. Click: It may also happen that the part goes straight through another part! No worry! We ll handle this in the next step! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 38
39 Press and hold the mouse s scroll wheel, and move the mouse Make sure the model is positioned on screen as illustrated opposite Zoom out again to display the next part again! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 39
40 113 We re still in the MATE environment, so we ll simply continue! The opposite illustration shows the piece is positioned adjacent to the middle. We'll correct that! 3. Using the scroll wheel, rotate the model again (see next image) Using the scroll wheel, rotate the model again (see next image). SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 40
41 116 Distance Enter a size of 0,825mm. 3. Click: OK. It now is in the middle! The axle now enters the hole! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 41
42 Press the spacebar! 3. Double-click: Normal To: 121 You ll see the part now is well distributed among the previous part! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 42
43 Using the scroll wheel, rotate the model. See the image opposite. Let's save our data once again for the sake of safety! Click Save: 123 We ll now mount the rear wheels. Zoom in if necessary! 124 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 43
44 125 As a result, the wheel and the axle will be aligned. OK Using the scroll wheel, rotate the model. See the image opposite. 3. Click OK: The wheel and the axle are now well aligned with respect to each other. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 44
45 Using the scroll wheel, rotate the model. See the image opposite. 3. Click: 129 As a result, the wheel is well fixed to the axle. 1. Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 45
46 Using the scroll wheel, rotate the model. See the image opposite. Now do the same for the second rear wheel; use what you ve learned in steps 123 through 129 Let's save our data once again for the sake of safety! Click Save: 131 We now return to the warehouse, for new parts. 3. We're looking for: 2x 2x2 L.sldprt 2x Flat1x4.sldprt 132 1x 4 block.sldprt 1x steering asm SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 46
47 133 We re going to mount more things! 3. Click: 4. Click OK: Using the scroll wheel, rotate the model. See the image opposite. 3. Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 47
48 136 We re still in the MATE environment, so we ll simply continue! Zoom in if necessary! As you can see, the part is properly positioned. 3. Click OK: Using the scroll wheel, rotate the model. See the image opposite. 2. Below (and opposite) you can see how the part must be positioned. 3. Do the next ones by yourself! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 48
49 139 Let's move on! 140 There s a fair chance the part is not correctly positioned! 1. Therefore, click: You can see below the part is now correctly positioned! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 49
50 Using the scroll wheel, zoom in on the model. The image opposite is displayed Using the scroll wheel, zoom out on the model. The image opposite is displayed. 3. Both parts now fit well together on top of each other. See the next step! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 50
51 145 Do the same by yourself with the next two parts. 146 Refer to the example and use your knowledge from steps: 139 through 145 Let's save our data once again for the sake of safety! Click Save: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 51
52 147? It worked. Next, we ll continue the mounting process. Please remember this is not easy because it is crystal clear. You may need to zoom in close enough!! 148 The result will be as illustrated opposite! Using the scroll wheel, zoom out and turn on the model again. The image below is displayed. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 52
53 Close the Mate function: 151 The result will be as illustrated opposite! Let's save our data once again for the sake of safety! Click Save: 152 We now return to the warehouse, for new parts. 3. We're looking for: 2x 2x 3x 2x SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 53
54 Using the left mouse button, click: Hold the button down and drag the part to! 2. See the example opposite!! Using the right mouse button, click: Hold the button down and rotate the part to! 2. See the example opposite!! 155 We re going to mount more things! 3. Click: 4. Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 54
55 Using the scroll wheel, zoom out on the model. The image opposite is displayed. 3. Click: 4. Click OK: Using the scroll wheel, zoom out on the model. The image opposite is displayed. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 55
56 Click: Using the scroll wheel, zoom out on the model. The image opposite is displayed. 3. Click: 4. Click: Using the scroll wheel, zoom out on the model. The image opposite is displayed. 3. Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 56
57 Using the scroll wheel, zoom out on the model. The image opposite is displayed Using the scroll wheel, zoom out on the model. The image opposite is displayed. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 57
58 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 58
59 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 59
60 Using the scroll wheel, zoom out on the model. The image opposite is displayed. 172 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 60
61 Using the scroll wheel, zoom out on the model. The image opposite is displayed Click: Using the scroll wheel, zoom out on the model. The image opposite is displayed Click: 4. Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 61
62 Using the scroll wheel, zoom out on the model. The image opposite is displayed. 3. Click: 4. Click: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 62
63 SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 63
64 Using the scroll wheel, zoom out and turn on the model again. The image opposite is displayed. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 64
65 Click OK: 185 Do the same by yourself with the next two parts. You don t remember how? Use the technique from steps: through The result must be as in the example illustrated opposite! Let's save our data once again for the sake of safety! Click Save: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 65
66 187 We now return to the warehouse, for new parts. 3. We're looking for: 2x cage.sldasm 188 We re going to mount more things! 1. Click the edge with the right mouse button. Hold the button down and rotate the part such that it will be positioned as illustrated here! 2. See the example opposite!! Repeat for the second part! 2. Click the edge with the right mouse button. Hold the button down and rotate the part such that it will be positioned as illustrated here! 3. See the example opposite!! SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 66
67 Click the edge with the left mouse button. Hold the button down and shift the part such that it will be positioned as illustrated here! 2. See the example opposite!! Using the left mouse button, click the edge of the second part!. Hold the button down and shift the part such that it will be positioned as illustrated here! 2. See the example opposite!! Using the scroll wheel, zoom in and turn the model again. The image opposite is displayed. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 67
68 Click OK: Click OK: Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 68
69 192 Zoom in!! ATTENTION: CLICK THE EDGE!!!! 3. Click OK: 193 Zoom out!! Using the scroll wheel, rotate the model. See the image opposite. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 69
70 Click OK: Using the scroll wheel, rotate the model. See the image opposite. 3. Click: 4. Click OK: 197 The result must be See the example opposite! Let's save our data once again for the sake of safety! Click Save: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 70
71 198 We now return to the warehouse, for new parts. 3. We're looking for: 1x Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 71
72 201 Zoom in!! Using the scroll wheel, rotate the model. See the image opposite. 203 Zoom in!! 2. Click OK: SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 72
73 Distance SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 73
74 The entire part will shift back to the starting position. 2. Enter the size of 16mm: 3. Click OK: 208 Fantastic! You have successfully completed your first building blocks assembly using 3D software by SolidWorks. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 74
75 Did you like this tutorial? If you would like to use it with your students to prepare them for the future, you ll need the required models (parts). (The SolidWorks Parts and Assemblies) For use with SolidWorks Educational Release To acquire the 3D models for use with this Tutorial in combination with SolidWorks, please contact Jack van den Broek, the author of this Tutorial. SolidWorks VMBO Tutorial: Building Blocks Tutorial Toy Car 75
SolidWorks Tutorial 4 CANDLESTICK
SolidWorks Tutorial 4 CANDLESTICK Candlestick In this tutorial you will make a simple container and a candlestick out of sheetmetal. You will learn about working with sheet metal in SolidWorks. We will
Introduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
SolidWorks Tutorial 3 MAGNETIC BLOCK
SolidWorks Tutorial 3 MAGNETIC BLOCK Magnetic Block In this exercise you will make a magnetic block. To do so, you will create a few parts, which you will assemble. You will learn the following new applications
Crop and Frame Your Photos
Crop and Frame Your Photos Paint Shop Pro s crop tool gives you total control over your photo compositions. Cropping allows you to turn busy portraits into professional prints. And when you have a nicely
Introduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
Introduction to Google SketchUp (Mac Version)
Introduction to Google SketchUp (Mac Version) This guide is handy to read if you need some basic knowledge to get started using SketchUp. You will see how to download and install Sketchup, and learn how
Introduction to SketchUp
Introduction to SketchUp This guide is handy to read if you need some basic knowledge to get started using SketchUp. You will see how to download and install Sketchup, and learn how to use your mouse (and
Getting Started in Tinkercad
Getting Started in Tinkercad By Bonnie Roskes, 3DVinci Tinkercad is a fun, easy to use, web-based 3D design application. You don t need any design experience - Tinkercad can be used by anyone. In fact,
SolidWorks tutorial 13-5 Exciting. Includes SolidWorks SustainabilityXpress
SolidWorks tutorial 13-5 Exciting Includes SolidWorks SustainabilityXpress A better world for our children and grandchildren Pre-vocational Secondary Education and Senior Secondary Vocational Education
5. Tutorial. Starting FlashCut CNC
FlashCut CNC Section 5 Tutorial 259 5. Tutorial Starting FlashCut CNC To start FlashCut CNC, click on the Start button, select Programs, select FlashCut CNC 4, then select the FlashCut CNC 4 icon. A dialog
CREATING A 3D VISUALISATION OF YOUR PLANS IN PLANSXPRESS AND CORTONA VRML CLIENT
CREATING A 3D VISUALISATION OF YOUR PLANS IN PLANSXPRESS AND CORTONA VRML CLIENT 20-25 Minutes This topic is for users of PlansXpress Total Toolkit Edition. To upgrade to PlansXpress Total Toolkit, call
Getting Started with WebSite Tonight
Getting Started with WebSite Tonight WebSite Tonight Getting Started Guide Version 3.0 (12.2010) Copyright 2010. All rights reserved. Distribution of this work or derivative of this work is prohibited
Microsoft Office PowerPoint 2007 Basics Workshop
Microsoft Office PowerPoint 2007 Basics Workshop Created & Hosted by: Hagop (Jack) Hadjinian I.A., Information Technology Course Contents Overview: Get set with the basics Lesson 1: Create your slides
If you know exactly how you want your business forms to look and don t mind
appendix e Advanced Form Customization If you know exactly how you want your business forms to look and don t mind detail work, you can configure QuickBooks forms however you want. With QuickBooks Layout
Creating a Poster in PowerPoint 2010. A. Set Up Your Poster
View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and
2. More Use of the Mouse in Windows 7
65 2. More Use of the Mouse in Windows 7 The mouse has become an essential part of the computer. But it is actually a relatively new addition. The mouse did not become a standard part of the PC until Windows
How to create PDF maps, pdf layer maps and pdf maps with attributes using ArcGIS. Lynne W Fielding, GISP Town of Westwood
How to create PDF maps, pdf layer maps and pdf maps with attributes using ArcGIS Lynne W Fielding, GISP Town of Westwood PDF maps are a very handy way to share your information with the public as well
House Design Tutorial
Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created
CATIA Basic Concepts TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Manual Format...2 Log on/off procedures for Windows...3 To log on...3 To logoff...7 Assembly Design Screen...8 Part Design Screen...9 Pull-down Menus...10 Start...10
Adobe Dreamweaver Student Organizations Publishing Details Getting Started Basic Web Page Tutorial For Student Organizations at Dickinson College *
Adobe Dreamweaver Student Organizations Publishing Details Getting Started Basic Web Page Tutorial For Student Organizations at Dickinson College * Some Student Organizations are on our web server called
Windows XP Pro: Basics 1
NORTHWEST MISSOURI STATE UNIVERSITY ONLINE USER S GUIDE 2004 Windows XP Pro: Basics 1 Getting on the Northwest Network Getting on the Northwest network is easy with a university-provided PC, which has
Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering
Solidworks Lesson 6 - Assembly & Part Drawings UCF Engineering Mechanical Drawings So far we have been dealing with creating parts and assemblies in SolidWorks, however, when you go to get a part machined,
Chapter 30: How to import a DWG drawing not created with MasterChef
Chapter 30: How to import a DWG drawing not created with MasterChef Launch MasterChef from the icon on your desktop. Note: If you are using a demo version, once loaded the program, a message will notify
GETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6
1. Scaling your project drawing for import into DIALux using AutoCAD 2004 OR DraftSight, (procedure is similar in AutoCAD 2014 but you will need to access the commands through the ribbon interface): a)
GYM PLANNER. User Guide. Copyright Powerzone. All Rights Reserved. Software & User Guide produced by Sharp Horizon. www.sharphorizon.com.
GYM PLANNER User Guide Copyright Powerzone. All Rights Reserved. Software & User Guide produced by Sharp Horizon. www.sharphorizon.com. Installing the Software The Powerzone gym Planner is a piece of software
INTRODUCTION TO DESKTOP PUBLISHING
INTRODUCTION TO DESKTOP PUBLISHING Desktop publishing uses page layout software and a personal computer to combine text, type, drawings, and images on a page to create books, newsletters, marketing brochures,
There are two distinct working environments, or spaces, in which you can create objects in a drawing.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial
Windows Movie Maker 2012
Windows Movie Maker 2012 Open Windows Movie Maker A shortcut for Movie Maker should be on the desktop, but if it is not, you can search for the program by touching the right edge of the screen and swiping
POWERPOINT BASICS: MICROSOFT OFFICE 2013
University of North Carolina at Chapel Hill Libraries Carrboro Cybrary Chapel Hill Public Library Durham County Public Library POWERPOINT BASICS: MICROSOFT OFFICE 2013 GETTING STARTED PAGE 02 Prerequisites
Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives
Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to
Autodesk Fusion 360: Assemblies. Overview
Overview In this module you will learn how different components can be put together to create an assembly. We will use several tools in Fusion 360 to make sure that these assemblies are constrained appropriately
How To Insert Hyperlinks In Powerpoint Powerpoint
Lesson 5 Inserting Hyperlinks & Action Buttons Introduction A hyperlink is a graphic or piece of text that links to another web page, document, or slide. By clicking on the hyperlink will activate it and
Greetings Keyboard Mastery Keyboarding Students! Teacher: Mrs. Wright
Greetings Keyboard Mastery Keyboarding Students! Teacher: Mrs. Wright You do NOT have to turn anything in I can see your scores and grades online in my Teacher Manager. Read this syllabus carefully! Step
Scratch Primary Lesson 4
Scratch Primary Lesson 4 Motion and Direction creativecomputerlab.com Motion and Direction In this session we re going to learn how to move a sprite. Go to http://scratch.mit.edu/ and start a new project:
Building A Computer: A Beginners Guide
Building A Computer: A Beginners Guide Mr. Marty Brandl The following was written to help an individual setup a Pentium 133 system using an ASUS P/I- P55T2P4 motherboard. The tutorial includes the installation
Objects in Alice: Positioning and Moving Them
Objects in Alice: Positioning and Moving Them Download the Alice World that goes along with this tutorial. You will be learning about the objects in Alice, how they are positioned in the space of the Alice
Publisher 2010 Cheat Sheet
April 20, 2012 Publisher 2010 Cheat Sheet Toolbar customize click on arrow and then check the ones you want a shortcut for File Tab (has new, open save, print, and shows recent documents, and has choices
Florence School District #1
Florence School District #1 Module 2: SMART Board Basics and Beyond 1 SMART Board Software and Beyond In SMART Notebook software, you can create or open SMART Notebook software (.notebook) files. After
Introduction. Inserting Hyperlinks. PowerPoint 2010 Hyperlinks and Action Buttons. About Hyperlinks. Page 1
PowerPoint 2010 Hyperlinks and Action Buttons Introduction Page 1 Whenever you use the Web, you are using hyperlinks to navigate from one web page to another. If you want to include a web address or email
TUTORIAL 4 Building a Navigation Bar with Fireworks
TUTORIAL 4 Building a Navigation Bar with Fireworks This tutorial shows you how to build a Macromedia Fireworks MX 2004 navigation bar that you can use on multiple pages of your website. A navigation bar
Flash Objects. Dynamic Content 1
Dynamic Content 1 The WebPlus Gallery tab provides a wide range of predesigned Flash banners that you can add to your site, and customize to suit your needs. In addition, it s very easy to add your own
AutoDWG DWGSee DWG Viewer. DWGSee User Guide
DWGSee User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee After you install
Manual. OIRE Escuela de Profesiones de la Salud. Power Point 2007
Power Point 2007 Manual OIRE Escuela de Profesiones de la Salud Power Point 2007 2008 The New Power Point Interface PowerPoint is currently the most common software used for making visual aids for presentations.
Tip of the Week: Creating Geometry from AutoCAD Drawings
PTC Email Newsletter March 4, 2002 PTC Product Focus: Assembly Performance Extension (APX) Tip of the Week: Creating Geometry from AutoCAD Drawings Training: Upcoming Training Classes PTC Product Focus:
Microsoft Word 2010 Basics
Microsoft Word 2010 Basics 1. Start Word if the Word 2007 icon is not on the desktop: a. Click Start>Programs>Microsoft Office>Microsoft Word 2007 b. The Ribbon- seen across the top of Microsoft Word.
Quick Start Tutorial Metric version
Quick Start Tutorial Metric version 1996-2009 Cadsoft Corporation. No part of this guide or the accompanying software may be reproduced or transmitted, electronically or mechanically, without written permission
How To Understand How To Use A Computer On A Macintosh (Apple) Computer With A Mouse And Mouse (Apple Macintosh)
Chapter 1 Macintosh Basics The purpose of the this chapter is to help introduce students to the Macintosh environment. Although we will be dealing with Macintosh computers exclusively in this class, students
How To Print To Scale With Easy Blue Print
Exporting and Printing Floor Plans From day one, your end goal has been to eventually get some floor plans (in some format) out of Easy Blue Print, which you can then use someplace else. Sure, Easy Blue
Hands-on Practice. Hands-on Practice. Learning Topics
Using Microsoft PowerPoint Software on a SMART Board Interactive Whiteboard You make presentations for a reason to communicate a message. With a SMART Board interactive whiteboard, you can focus the attention
Creating Custom Crystal Reports Tutorial
Creating Custom Crystal Reports Tutorial 020812 2012 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or mechanical,
Microsoft PowerPoint 2010 Computer Jeopardy Tutorial
Microsoft PowerPoint 2010 Computer Jeopardy Tutorial 1. Open up Microsoft PowerPoint 2010. 2. Before you begin, save your file to your H drive. Click File > Save As. Under the header that says Organize
Adobe Dreamweaver - Basic Web Page Tutorial
Adobe Dreamweaver - Basic Web Page Tutorial Window Elements While Dreamweaver can look very intimidating when it is first launched it is an easy program. Dreamweaver knows that your files must be organized
Introduction to Computers: Session 3 Files, Folders and Windows
Introduction to Computers: Session 3 Files, Folders and Windows Files and folders Files are documents you create using a computer program. For example, this document is a file, made with a program called
Instructions for Formatting APA Style Papers in Microsoft Word 2010
Instructions for Formatting APA Style Papers in Microsoft Word 2010 To begin a Microsoft Word 2010 project, click on the Start bar in the lower left corner of the screen. Select All Programs and then find
Creating Your Teacher Website using WEEBLY.COM
Creating Your Teacher Website using WEEBLY.COM Gilbert, Akiba Maynard Jackson High School Creating Your Teacher Website Using WEEBLY.COM In this tutorial, we will learn how to build a simple FOUR PAGE
Creating a Calendar in CorelDRAW
Creating a Calendar in CorelDRAW Welcome to this tutorial using CorelDRAW! The hardest part about creating a calendar in CorelDRAW is deciding on the size. Once you set the page size, the script will take
Create a Poster Using Publisher
Contents 1. Introduction 1. Starting Publisher 2. Create a Poster Template 5. Aligning your images and text 7. Apply a background 12. Add text to your poster 14. Add pictures to your poster 17. Add graphs
Sendspace Wizard Desktop Tool Step-By-Step Guide
Sendspace Wizard Desktop Tool Step-By-Step Guide Copyright 2007 by sendspace.com This publication is designed to provide accurate and authoritative information for users of sendspace, the easy big file
To Begin Customize Office
To Begin Customize Office Each of us needs to set up a work environment that is comfortable and meets our individual needs. As you work with Office 2007, you may choose to modify the options that are available.
Tooling List 17mm Socket 17mm Wrench 24mm Wrench 26mm Wrench 3/8 Drive Ratchet Torque Wrench
Thank you for purchasing the CorkSport Rear Adjustable Camber Arms. By replacing your OEM camber arms with the CorkSport Adjustable Camber Arms, you will be able to dial in your suspension with +/- 5 degrees
FLEETMATE. Overview. CUSTOMER GUIDE: Tire Management
Overview FLEETMATE features a Tire Management Module that will enable you to serialize your tires and track tire location, pressure and tread depth, usage (i.e. miles or km), and tire rotations. Using
Section #13 Pictorial Table Of Contents. The Caster. Top & Bottom Shelves. Pages 617-623 Page 624 Page 625 Pages 626-628 Pages 629-633
AQX Introduction Section # Pictorial Table Of Contents Completed Shop Cart Step-by-Step Tutorial The Caster The Leg Fractional The Lower Cross Member Machining w/ Access Holes AutoQuoterX Page 610 Page
MailChimp Instruction Manual
MailChimp Instruction Manual Spike HQ This manual contains instructions on how to set up a new email campaign, add and remove contacts and view statistics on completed email campaigns from within MailChimp.
Google Sites: Site Creation and Home Page Design
Google Sites: Site Creation and Home Page Design This is the second tutorial in the Google Sites series. You should already have your site set up. You should know its URL and your Google Sites Login and
Uploading and Editing Your Course Web Page
Uploading and Editing Your Course Web Page CM210 Multimedia Storytelling I Fall 2008 Downloading the Web Page Template I have created and styled a simple Web page that everyone can use as the index page
Working with SQL Server Integration Services
SQL Server Integration Services (SSIS) is a set of tools that let you transfer data to and from SQL Server 2005. In this lab, you ll work with the SQL Server Business Intelligence Development Studio to
M8 basics. Setting Up Your M8 Android Box... 2. Remote Essentials... 4. Using Your M8 Android Box... 6. Setting up Wireless... 6
M8 basics Contents Setting Up Your M8 Android Box... 2 Remote Essentials... 4 Using Your M8 Android Box... 6 Setting up Wireless... 6 Changing Display Settings... 7 Setting the Time Zone... 9 Using Apps...
DESIGN A WEB SITE USING PUBLISHER Before you begin, plan your Web site
Page 1 of 22 DESIGN A WEB SITE USING PUBLISHER Before you begin, plan your Web site Before you create your Web site, ask yourself these questions: What do I want the site to do? Whom do I want to visit
Create an Art Collage
Create an Art Collage Anyone with children knows how much art they bring home from school everyday, those backpacks full of art add up fast. Now, you don t have to part with a single precious piece or
Mail Merge (Microsoft Office 2010)
Mail Merge (Microsoft Office 2010) Microsoft Word s 2010 mail merge feature allows users to create one document, such as a customer appreciation letter, promotional letter, or an employee appreciation
Introduction to Microsoft Word
Introduction to Microsoft Word Setting up project gallery toolbars formatting palette opening saving Writing and formatting margins layout headers and footers text color basic formatting special characters
SnagIt Add-Ins User Guide
Version 8.1 User Guide By TechSmith Corp. User Guide User Guide Contents User s Guide 1 Overview...1 Word, PowerPoint, and Excel Add-Ins...2 Outlook Add-In...2 Internet Explorer / Windows Explorer Add-In...2
LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963
LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 Thank you for purchasing LG Motorsports products for your Gen 5 Camaro. Parts Inventory:
Protocol for Microscope Calibration
Protocol for Microscope Calibration A properly calibrated system is essential for successful and efficient software use. The following are step by step instructions on how to calibrate the hardware using
Customizing forms and writing QuickBooks Letters
LESSON 15 Customizing forms and writing QuickBooks Letters 15 Lesson objectives, 398 Supporting materials, 398 Instructor preparation, 398 To start this lesson, 398 About QuickBooks forms, 399 Customizing
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by
ME 24-688 Week 4 Project 1 Assemblies and Constraints
1 Introduction to Assembly Design The following section will give an overview of bring individual components into a common environment and use various tools to assemble them. 1.1 Definition of an Assembly
Intro to 3D Animation Using Blender
Intro to 3D Animation Using Blender Class Instructor: Anthony Weathersby Class Objectives A primer in the areas of 3D modeling and materials An introduction to Blender and Blender s toolset Course Introduction
Dreamweaver and Fireworks MX Integration Brian Hogan
Dreamweaver and Fireworks MX Integration Brian Hogan This tutorial will take you through the necessary steps to create a template-based web site using Macromedia Dreamweaver and Macromedia Fireworks. The
SMART Board 9 Software Tips and Tricks
SMART Board 9 Software Tips and Tricks Tips for Writing and Adding Content Drawing (or erasing) fine lines For precise control of the digital ink, change the pen setting to use the thinnest line width.
Making Visio Diagrams Come Alive with Data
Making Visio Diagrams Come Alive with Data An Information Commons Workshop Making Visio Diagrams Come Alive with Data Page Workshop Why Add Data to A Diagram? Here are comparisons of a flow chart with
Lesson 26: Reflection & Mirror Diagrams
Lesson 26: Reflection & Mirror Diagrams The Law of Reflection There is nothing really mysterious about reflection, but some people try to make it more difficult than it really is. All EMR will reflect
Finding and Opening Documents
In this chapter Learn how to get around in the Open File dialog box. See how to navigate through drives and folders and display the files in other folders. Learn how to search for a file when you can t
Basic 2D Design Be sure you have the latest information!
Basic 2D Design mastercam x getting started tutorials Basic 2D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document was published.
CATIA Functional Tolerancing & Annotation TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Functional Tolerancing and Annotation...2 Pull-down Menus...3 Insert...3 Functional Tolerancing and Annotation Workbench...4 Bottom Toolbar Changes...5 3D Grid Toolbar...5
PowerPoint 2013: Basic Skills
PowerPoint 2013: Basic Skills Information Technology September 1, 2014 1 P a g e Getting Started There are a variety of ways to start using PowerPoint software. You can click on a shortcut on your desktop
Microsoft PowerPoint 2010 Handout
Microsoft PowerPoint 2010 Handout PowerPoint is a presentation software program that is part of the Microsoft Office package. This program helps you to enhance your oral presentation and keep the audience
Using Microsoft Word. Working With Objects
Using Microsoft Word Many Word documents will require elements that were created in programs other than Word, such as the picture to the right. Nontext elements in a document are referred to as Objects
How to Install Microsoft Windows Server 2008 R2 in VMware ESXi
How to Install Microsoft Windows Server 2008 R2 in VMware ESXi I am not responsible for your actions or their outcomes, in any way, while reading and/or implementing this tutorial. I will not provide support
Microsoft Migrating to Word 2010 from Word 2003
In This Guide Microsoft Word 2010 looks very different, so we created this guide to help you minimize the learning curve. Read on to learn key parts of the new interface, discover free Word 2010 training,
Speaker Drafting. Page 1 1997 2001 DASSAULT SYSTEMES
Speaker Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Assembly Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting
HOWTO annotate documents in Microsoft Word
HOWTO annotate documents in Microsoft Word Introduction This guide will help new users markup, make corrections, and track changes in a Microsoft Word document. These instructions are for Word 2007. The
Word 2010: The Basics Table of Contents THE WORD 2010 WINDOW... 2 SET UP A DOCUMENT... 3 INTRODUCING BACKSTAGE... 3 CREATE A NEW DOCUMENT...
Word 2010: The Basics Table of Contents THE WORD 2010 WINDOW... 2 SET UP A DOCUMENT... 3 INTRODUCING BACKSTAGE... 3 CREATE A NEW DOCUMENT... 4 Open a blank document... 4 Start a document from a template...
TYPING IN ARABIC (WINDOWS XP)
TYPING IN ARABIC (WINDOWS XP) There are two steps involved in setting up your Windows XP computer for Arabic. You must first install support for right-to-left languages; then you must enable Arabic input.
Beginning PowerPoint: Hands-On Exercise (Windows XP) Regent University
Beginning PowerPoint: Hands-On Exercise (Windows XP) 10/1/02 (Creation Date) 01/08/2004 Regent University The Center for Teaching & Learning 1 Beginning PowerPoint: Hands-On Exercise (Windows XP) 1. Open
Tutorial 1: The Freehand Tools
UNC Charlotte Tutorial 1: The Freehand Tools In this tutorial you ll learn how to draw and construct geometric figures using Sketchpad s freehand construction tools. You ll also learn how to undo your
Why Use OneNote? Creating a New Notebook
Why Use OneNote? OneNote is the ultimate virtual notebook that enables users to create notes in various formats, shares those notes, sync those notes with the cloud and collaborate with others. You can
Tutorial of Deltek s Expense Report Domestic Travel Edition
Tutorial of Deltek s Expense Report Domestic Travel Edition Please note that any expense incurred by an employee and to be reimbursed by BCF Solutions, Inc. has to be through an expense report. Step 1:
Statgraphics Getting started
Statgraphics Getting started The aim of this exercise is to introduce you to some of the basic features of the Statgraphics software. Starting Statgraphics 1. Log in to your PC, using the usual procedure