Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering
|
|
|
- Augustine Hood
- 7 years ago
- Views:
Transcription
1 Solidworks Lesson 6 - Assembly & Part Drawings UCF Engineering
2 Mechanical Drawings So far we have been dealing with creating parts and assemblies in SolidWorks, however, when you go to get a part machined, you will need to create a mechanical drawing of each of your parts (and assemblies). Mechanical drawings are important because they allow those who are technically trained to reconstruct your 3D geometry from 2D drawings.
3 Fortunately, SolidWorks makes it very easy for us to create drawings from a part or assembly file. In fact, if built properly, SolidWorks will also dimension the entire part and assembly for us something that saves a lot of time!
4 Rather than start a new part from scratch, lets open the same assembly that we have been using for the past several lectures:
5 Once we open the assembly, we can click on the following button which will automatically create a drawing file from our assembly:
6 Drawing Format At first you see several different formats that are set up for you. Choose A-Landscape.
7 However, before we can begin placing views, it is important to set our projection style to Third Angle (in order to have the projections behave as we expect) To do this, right click anywhere on the sheet and click on Properties (or you can right click on the sheet in the Feature Manager)
8 This will open the Sheet Properties window:
9 Open up the palette on the RIGHT side menu Click and HOLD the view you want and drag it into the drawing field. Choose the ISOMETRIC view and Choose the ISOMETRIC view and drag it to the drawing field.
10 Once you have placed a view into the drawing field you can access any type of annotations by either clicking on the appropriate button on the dynamic toolbar or RIGHT clicking on the design.
11 Let s add a bill of materials. Right click on design, choose TABLES, then bill of materials. Property Manager will open, click OK Now click the design, then AUTOBALLOON on the toolbar. Click OK in property manager.
12 Now add a FRONT VIEW from the palette and click OK in property manager. Then click the design and then AUTOBALLOON again. You will notice the #4 part is now being shown.
13 Using SolidWorks to create the drawing for your assemblies can save a lot of time, however, the real power is when you go to create a drawing for a specific part. So, we can do this by creating a new sheet within the drawing file and linking to one of our part files.
14 Right click on the SHEET 1 tab to add a new sheet. Unfortunately, only the assembly file is shown in the palette. Click the box with the 3 dots to browse for the upper saddle. Choose the upper saddle from the screen and click OPEN. The upper saddle views will then appear in the palette for you to choose from.
15 Choose the FRONT view, the click, then move UPWARD. Another VIEW will appear, click. Then move right, another view will appear, click, then move it another direction so that you get a 3D orthogonal view plus isometric. If you click the FRONT VIEW and drag it around, you will notice the other view move with it so that it is aligned.
16 Change the view of the FRONT to hidden line and the Isometric view to shaded with edges. Simply click on the design and select the change. It would be nice to have some It would be nice to have some dimensions too. Click on the FRONT view as that is the one we used to project all the others and on the top toolbar choose MODEL ITEMS.
17 In property manager, choose SOURCE and select entire model from the menu. And also check, import items into all views. Click OK The dimensions will automatically appear, however, you may need to shift the dimensions around for aesthetics.
18 If the UNITS are wrong, right click on Shaft Clamp in feature manger and change the units to MMPS.
19 Now you can ADD another SHEET. Import the lower saddle. And repeat the process.
20 Repeat for the HEW Screw. To get the projected view you may have to RIGHT CLICK on the part, then choose DRAWING VIEWS, then Projected view.
21 Save this drawing!
22 As you can see, if properly built, SolidWorks can construct the necessary drawing files almost automatically. This is another reason why it is important to fully constrain your sketches when you are modeling your parts, if you dimension them properly, SolidWorks will be able to import your dimensions directly into your drawings.
23 Lets make a new part. Start by choosing extruded boss/base from the TOP PLANE. Make a rectangle and dimension it 0.10 x Exit sketch and extrude to 0.04
24 Do an EXTRUDED CUT on the top surface. Change view to Normal and draw a rectangle on the entire right side. Dimension the lower edge to be Exit sketch and extrude downward 0.02 then click OK. Save part as block.
25 Now choose make drawing from part on toolbar above. Choose A-Landscape. Right click, choose properties to change view to THIRD ANGLE. Open the palette and drag in the Front View, clicking to reveal all the other views. You may notice that the isometric view is too large. Click on the isometric design.
26 In property manager, you can change the scale by selecting CUSTOM SCALE and choosing the scale you want from the menu. Choose 1:2
27 Change the isometric view to shaded with edges and add the MODEL ITEMS to reveal the dimensions. Let s say we want to change the width of the cut! Before we doing anything, save the drawing.
28 Change your window back to the part and double click on the cut part to revel the dimensions. Change the width to Click OK, then RE-BUILD
29 Change your window back to the drawing. Notice the changes are already fixed. Let s make a change on Let s make a change on the drawing now. Change the cut depth to 0.03 by clicking on the dimension in the drawing. Click RE- BUILD
30 Change the window back to the part. Notice the changes. Solidworks uses REFERENCES whereas other 3D CAD programs do not. Lets add a hold to the top Lets add a hold to the top surface. Choose Extruded CUT. Draw a circle with a diameter of 0.02 and 0.03 from each edge. Be sure o change your views.
31 Change the window back to the drawing and you will discover the hole there. If you go through the ADD MODEL ITEMS procedure again, it will add the additional missing dimensions you just added.
SolidWorks: Mirror, Revolve, and. Introduction to Robotics
SolidWorks: Mirror, Revolve, and Circular Pattern Introduction to Robotics Let s Review At this point we have learned the following: Extrude Boss/Base Extruded Cut Adding Relations and Dimensions Linear
CATIA Drafting TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Drafting...2 Drawing Screen...3 Pull-down Menus...4 File...4 Edit...5 View...6 Insert...7 Tools...8 Drafting Workbench...9 Views and Sheets...9 Dimensions and Annotations...10
Introduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
Pro/ENGINEER Wildfire 4.0 Basic Design
Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do
Chapter 9. Editing Features. Learning Objectives
Chapter 9 Editing Features Learning Objectives After completing this chapter, you will be able to: Edit features. Edit sketches of the sketch based features. Edit the sketch plane of the sketch based features.
Introduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
SolidWorks. SolidWorks Teacher Guide. and Student Courseware
SolidWorks SolidWorks Teacher Guide and Student Courseware SolidWorks Corporation Outside the U.S.: +1-978-371-5011 300 Baker Avenue Fax: +1-978-371-7303 Concord, Massachusetts 01742 USA Email: info@solidworks.com
SolidWorks Tutorial 3 MAGNETIC BLOCK
SolidWorks Tutorial 3 MAGNETIC BLOCK Magnetic Block In this exercise you will make a magnetic block. To do so, you will create a few parts, which you will assemble. You will learn the following new applications
Understand the Sketcher workbench of CATIA V5.
Chapter 1 Drawing Sketches in Learning Objectives the Sketcher Workbench-I After completing this chapter you will be able to: Understand the Sketcher workbench of CATIA V5. Start a new file in the Part
TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
Creating detailed drawings
Creating detailed drawings Publication Number spse01545 Creating detailed drawings Publication Number spse01545 Proprietary and restricted rights notice This software and related documentation are proprietary
SolidWorks Tutorial 4 CANDLESTICK
SolidWorks Tutorial 4 CANDLESTICK Candlestick In this tutorial you will make a simple container and a candlestick out of sheetmetal. You will learn about working with sheet metal in SolidWorks. We will
2013 Getting Started Guide
2013 Getting Started Guide The contents of this guide and accompanying exercises were originally created by Nemetschek Vectorworks, Inc. Vectorworks Fundamentals Getting Started Guide Created using: Vectorworks
SpaceClaim Introduction Training Session. A SpaceClaim Support Document
SpaceClaim Introduction Training Session A SpaceClaim Support Document In this class we will walk through the basic tools used to create and modify models in SpaceClaim. Introduction We will focus on:
Introduction to CATIA V5
Introduction to CATIA V5 Release 16 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes
Generative Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Generative Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting
Figure 1 - Delta Theta Input Selection
Creating Cams in Pro/Engineer Wildfire Using DYNACAM Mechanical Engineering Mechanical Design Created by: David E. Yamartino M.S. Mechanical Engineering May 2004 April 12, 2004 Objective: The objective
Exercise: Building and zone geometry import from SketchUp
Exercise: Building and zone geometry import from SketchUp Purpose Learn how to create and import building and zone geometry from SketchUp into IDA ICE. Learn how to work with imported building and zone
An introduction to 3D draughting & solid modelling using AutoCAD
An introduction to 3D draughting & solid modelling using AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA These notes are to be used in conjunction with the AutoCAD software
CATIA for Design and Engineering. Version 5 Releases 14 & 15. David S. Kelley. Central Michigan University SDC
CATIA for Design and Engineering ersion 5 Releases 4 & 5 David S. Kelley Central Michigan University SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com TUTORIAL Extruded
SolidWorks Implementation Guides. Sketching Concepts
SolidWorks Implementation Guides Sketching Concepts Sketching in SolidWorks is the basis for creating features. Features are the basis for creating parts, which can be put together into assemblies. Sketch
Mastercam Instructions. KTH School of Architecture Digital Fabrication Lab - CNC Router Version 2.1 2014-02-06
Mastercam Instructions KTH School of Architecture Digital Fabrication Lab - CNC Router Version 2.1 2014-02-06 CONTENTS: 1. Setup in Rhino and Mastercam 2. Creating A Drilling Operation 3. Creating A Contour
Creating 2D Drawings from 3D AutoCAD Models
Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the
Speaker Drafting. Page 1 1997 2001 DASSAULT SYSTEMES
Speaker Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Assembly Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting
Creating Drawings in Pro/ENGINEER
6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing
Autodesk Fusion 360: Assemblies. Overview
Overview In this module you will learn how different components can be put together to create an assembly. We will use several tools in Fusion 360 to make sure that these assemblies are constrained appropriately
Making 3D Threads in Feature Based Solid Modelers
Making 3D Threads in Feature Based Solid Modelers THREAD BASICS Making true geometric threads in feature-based solid modelers is a fairly straightforward process and can be handled using several different
Bentley MicroStation V8i
Bentley MicroStation V8i Bentley MicroStation V8i is a CAD program designed with the interoperability of software in mind. MicroStation is compatible with both DWG and DGN files, either preexisting or
IES <Virtual Environment> Tutorial. ModelIT (Version 6.0)
IES Tutorial ModelIT (Version 6.0) 1 Introduction: ModelIT Tutorial This document shows you how to use ModelIT, IES s 3D building geometry modelling tool. The tutorial is intended
SolidWorks Building Blocks Tutorial. Toy-car
SolidWorks Building Blocks Tutorial Toy-car From the age of until the age of For use with SolidWorks Educational Release 2010-2011 This tutorial was developed for SolidWorks Worldwide and may be used by
Visit the following websites to learn more about this book:
INSIDE: MultiMedia CD SolidWorks 2011 Tutorial with MultiMedia CD An audio/visual presentation of the tutorial projects A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Using over 50 feature
Assignment 1: Sketching and Simple Models
Assignment 1: Sketching and Simple Models 24 370, Engineering Design I, Spring 2011 Due @ 12:30, Wednesday January 19 th 2011 Name: Part 1: Conceptualization Sketches C Clamp Cam Shaft 1.a: Studies in
CATIA Functional Tolerancing & Annotation TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Functional Tolerancing and Annotation...2 Pull-down Menus...3 Insert...3 Functional Tolerancing and Annotation Workbench...4 Bottom Toolbar Changes...5 3D Grid Toolbar...5
Getting Started with CATIA Version 5
WB Getting Started with CATIA Version 5 Page 1 CATIA User Interface Let s review the following key features: Multi-document support Standard and specific menus & toolbars (File, Edit, Insert, ) Standard
ACS Version 10.6 - Check Layout Design
ACS Version 10.6 - Check Layout Design Table Of Contents 1. Check Designer... 1 About the Check Design Feature... 1 Selecting a Check Template... 2 Adding a Check Template... 2 Modify a Check Template...
Creating Posters in Excel (2007 & 2010)
Creating Posters in Excel (2007 & 2010) Although it would be nice to have a poster printer in each of our homes and work areas, having such a tool is unfortunately not something that will become a reality
Online Training Program Offered by CADCIM Technologies
Online Training Program Offered by CADCIM Technologies CADCIM Technologies provides effective and affordable online training on various software packages including Computer Aided Design and Manufacturing
SketchUp Instructions
SketchUp Instructions Every architect needs to know how to use SketchUp! SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially
Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics.
Importing 3D models Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. In this tutorial, you will modify a three-dimensional model of a transmission
Roof Tutorial. Chapter 3:
Chapter 3: Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other
How to Use the Drawing Toolbar in Microsoft Word
How to Use the Drawing Toolbar in Microsoft Word The drawing toolbar allows you to quickly and easily label pictures (e.g., maps) in a MS Word file. You can add arrows, circle spots, or label with words.
3D Modeling in Vectorworks 2009 by Jonathan Pickup. mple
3D Modeling in Vectorworks 2009 by Jonathan Pickup mple 3D Modeling in Vectorworks 2009 by Jonathan Pickup 3D Modeling Vectorworks 2009 Published by Nemetschek North America 2008 Jonathan Pickup Vectorworks
SolidWorks 2013 Tutorial with
SolidWorks 2013 Tutorial with Video Instruction A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard CSWP Marie P. Planchard CSWP Video Instruction SDC PUBLICATIONS Schroff
Learning Autodesk. Modeling, Analysis and Animation SDC. Randy H. Shih. Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.
Learning Autodesk Inventor 2012 Modeling, Analysis and Animation Randy H. Shih SDC Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Visit the following
Producing 2D Documentation from 3D Models in AutoCAD
Producing 2D Documentation from 3D Models in AutoCAD David Cohn 4D Technologies AC4689 Modeling in 3D is fine, but eventually you need to produce 2D drawings. In this class, you will learn about tools
Basic 2D Design Be sure you have the latest information!
Basic 2D Design mastercam x getting started tutorials Basic 2D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document was published.
CAD Student Guide. Engineering Design and Technology Series
Engineering Design and Technology Series CAD Student Guide Dassault Systèmes SolidWorks Corporation, 175 Wyman Street, Waltham, Massachusetts 02451 USA Phone: +1-800-693-9000 Outside the U.S.: +1-781-810-5011
Weld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes:
CATIA V5 Training Foils Weld Design Version 5 Release 19 January 2009 EDU_CAT_EN_WD1_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able to: - Weld parts,
MS Excel. Handout: Level 2. elearning Department. Copyright 2016 CMS e-learning Department. All Rights Reserved. Page 1 of 11
MS Excel Handout: Level 2 elearning Department 2016 Page 1 of 11 Contents Excel Environment:... 3 To create a new blank workbook:...3 To insert text:...4 Cell addresses:...4 To save the workbook:... 5
Mastercam X6 Basic 3D Design
Basic 3D Design mastercam x getting started tutorials Mastercam X6 Basic 3D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document
Part Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index
Part Design Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface The CATIA Version 5 Part
Communicate: In Print
Communicate: In Print A simple guide Work areas Communicate: In Print has two different modes in which to edit your documents: Create and Adjust modes. These are easily interchangeable and the toolbars
SolidWorks tutorial 13-5 Exciting. Includes SolidWorks SustainabilityXpress
SolidWorks tutorial 13-5 Exciting Includes SolidWorks SustainabilityXpress A better world for our children and grandchildren Pre-vocational Secondary Education and Senior Secondary Vocational Education
Lesson Four 3D Modeling
Lesson Four 3D Modeling In this lesson you will learn how to: Easily Rotate the UCS to model in different planes Model lines in a method similar to drawing isometrics Create 3D Router Lines Automatically
Pro/ENGINEER Wildfire 5.0 Introduction to Surface Modeling
Introduction Several advanced surface types are available as listed below. Variable Section Sweep Boundary Blend Section to Surfaces Blend Surface to Surface Blend A surface is created by sweeping a single
3. Locate the different selections of Styles from the Home Tab, Styles Group
Outlining in MS Word 2007 Microsoft Word 2007 provides users with an Outline View and Outlining toolbar, which allows us to create outlines. Outlines in Word are based on Styles. For instance if a line
Module 9: Assembly Drawing with
King Fahd University of Petroleum & Minerals College of Engineering Sciences Mechanical Engineering Department ME 210 Mechanical Engineering Drawing & Graphics Module 9: Assembly Drawing with Bill of Materials
TurboCAD Architectural
TurboCAD Architectural Version 15 Getting Started Guide IMSI/Design LLC, US 100 Rowland Blvd. Novato. CA 94945, USA Tel: +1-415-878-4000 Fax: +1-415-897-2544 Web Site www.imsisoft.com www.turbocad.com
SDC. Schroff Development Corporation WWW.SDCACAD.COM PUBLICATIONS. MultiMedia CD by Jack Zecher
MultiMedia CD by Jack Zecher An audioi/visual presentation of the tutorial exercises SDC PUBLICATIONS Schroff Development Corporation WWW.SDCACAD.COM AutoCAD 2002 Tutorial 2-1 Lesson 2 Geometric Construction
Creo Parametric - Advanced Primer Exercise Guide
Creo Parametric - Advanced Primer Exercise Guide Authored and published using Copyright 2009 Parametric Technology Corporation. All Rights Reserved. Copyright for PTC software products is with Parametric
Creating and Using Links and Bookmarks in PDF Documents
Creating and Using Links and Bookmarks in PDF Documents After making a document into a PDF, there may be times when you will need to make links or bookmarks within that PDF to aid navigation through the
Freehand Sketching. Sections
3 Freehand Sketching Sections 3.1 Why Freehand Sketches? 3.2 Freehand Sketching Fundamentals 3.3 Basic Freehand Sketching 3.4 Advanced Freehand Sketching Key Terms Objectives Explain why freehand sketching
How To Print To Scale With Easy Blue Print
Exporting and Printing Floor Plans From day one, your end goal has been to eventually get some floor plans (in some format) out of Easy Blue Print, which you can then use someplace else. Sure, Easy Blue
Geometer s Sketchpad. Discovering the incenter of a triangle
Geometer s Sketchpad Discovering the incenter of a triangle Name: Date: 1.) Open Geometer s Sketchpad (GSP 4.02) by double clicking the icon in the Start menu. The icon looks like this: 2.) Once the program
Technical Drawing Specifications Resource A guide to support VCE Visual Communication Design study design 2013-17
A guide to support VCE Visual Communication Design study design 2013-17 1 Contents INTRODUCTION The Australian Standards (AS) Key knowledge and skills THREE-DIMENSIONAL DRAWING PARALINE DRAWING Isometric
Part Design. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes
Part Design Page 1 Tutorial Objectives Description This tutorial is an introduction to Part Design. Message This tutorial illustrates how CATIA can Design precise 3D mechanical parts with an intuitive
PCB Prototyping Machine. Auto Lab. Tutorial MITS Electronics
PCB Prototyping Machine Auto Lab Tutorial MITS Electronics REVISION: October 1, 2011 1st edition CONTENTS: Design Pro Applications Import Gerber Files Import Drill File Auto Drill Generate Outline Generate
Creating 2D Isometric Drawings
1-(800) 877-2745 www.ashlar-vellum.com Creating 2D Isometric Drawings Using Graphite TM Copyright 2008 Ashlar Incorporated. All rights reserved. C62DISO0806. Ashlar-Vellum Graphite No matter how many Top,
SE OF THE PROGRAM...5
MyHatch User guide PREFACE... 2 GOAL OF THE SOFTWARE... 2 DEFINITION OF HATCHES IN AUTOCAD... 2 MYHATCH PROGRAM... 2 DEFINITION OF HATCH PATTERNS... 3 USE OF THE PROGRAM... 5 INSTALLATION... 5 TOOLBAR
Steps to PCB design using Orcad.
Steps to PCB design using Orcad. 1. Design circuit using schematic entry package (Capture). 2. Generate netlist for PCB package. 3. Import netlist into PCB package (LayoutPlus). 4. Place components, route
GETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6
1. Scaling your project drawing for import into DIALux using AutoCAD 2004 OR DraftSight, (procedure is similar in AutoCAD 2014 but you will need to access the commands through the ribbon interface): a)
Roof Tutorial. Chapter 3:
Chapter 3: Roof Tutorial The first portion of this tutorial can be completed independent of the previous tutorials. We ll go over some common roof styles that can be created using settings in the Wall
ME 24-688 Week 4 Project 1 Assemblies and Constraints
1 Introduction to Assembly Design The following section will give an overview of bring individual components into a common environment and use various tools to assemble them. 1.1 Definition of an Assembly
Printing Solutions for Word 2013. Printing Solutions for Word 2010. Printing Solutions for Word 2007. Printing Solutions for Word 2003
Printing Solutions for Word 2013 Printing Solutions for Word 2010 Printing Solutions for Word 2007 Printing Solutions for Word 2003 Printing solutions for Printers Word 2013 sure you have selected the
Epson Brightlink Interactive Board and Pen Training. Step One: Install the Brightlink Easy Interactive Driver
California State University, Fullerton Campus Information Technology Division Documentation and Training Services Handout Epson Brightlink Interactive Board and Pen Training Downloading Brightlink Drivers
Drawing Views with AutoCAD 2013: 2D Drawings from AutoCAD 3D Models AC2290-L and AC7046-L (repeat)
Drawing Views with AutoCAD 2013: 2D Drawings from AutoCAD 3D Models AC2290-L and AC7046-L (repeat) Drawing Views with AutoCAD 2013: 2D Drawings from AutoCAD and Autodesk Inventor 3D Models - AC6423-V J.C.
Creating Smart Models From Scan Data
Rapidform Tech Tip Creating Smart Models From Scan Data Related Product Version Rapidform XOR3 Goal To create a smart model from scan data. A smart model is a parametric model that uses parameters intelligently
Tip of the Week: Creating Geometry from AutoCAD Drawings
PTC Email Newsletter March 4, 2002 PTC Product Focus: Assembly Performance Extension (APX) Tip of the Week: Creating Geometry from AutoCAD Drawings Training: Upcoming Training Classes PTC Product Focus:
All V7 registers support barcode printing, except the Sharp 410/420 1A ROM and that limitation is based upon the register.
Tools Section Barcode Printing These are basic instructions for Version 7 Polling barcode printing. Users will need to have a PLU/UPC file containing either UPC-A, UPC-E, EAN 13 or EAN 8 numbers, label
SolidWorks Tutorial 5
SolidWorks Tutorial 5 Tic-Tac-Toe Preparatory Vocational Training and Advanced Vocational Training Dassault Systèmes SolidWorks Corporation, 75 Wyman Street Waltham, Massachusetts 05 USA Phone: +-800-69-9000
Raising the Roof Creating Roofs in Revit David Cohn
David Cohn AB322-1 Roofs are one of the most complex architectural elements to model, but with Revit you can create just about any type of roof. This class will explore the best methods for creating various
Microsoft Word 2010: How to Resize and Move Clip Art
Microsoft Word 2010: How to Resize and Move Clip Art Resizing Clip Art If your clip art is too big or too small you can resize to suit your needs. Click on your image with the left mouse button. You should
Using Excel to find Perimeter, Area & Volume
Using Excel to find Perimeter, Area & Volume Level: LBS 4 V = lwh Goal: To become familiar with Microsoft Excel by entering formulas into a spreadsheet in order to calculate the perimeter, area and volume
Layout Tutorial. Getting Started
Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating
Microsoft Access 2000 for Windows Handout: 3 Academic Computing Support Information Technology Services Tennessee Technological University December 2001 1. Creating a new database In this exercise, we
Publication Number spse01660
Assembly reports Publication Number spse01660 Assembly reports Publication Number spse01660 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
STL GENERATION INTRODUCTION TO STL. Written by Greta D Angelo
STL GENERATION Written by Greta D Angelo In this section: An introduction on.stl files How to make good.stl files How to make.stl on different softwares (Solidworks, PTC Creo, Rhinoceros 5, Autodesk Inventor)
Welcome to Mastercam
Welcome to Mastercam mastercam x getting started tutorials Mastercam X6 Welcome to Mastercam December 2011 Be sure you have the latest information! Information might have been changed or added since this
Layout Tutorial. Chapter 10: Getting Started
Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating
LESSON 7: IMPORTING AND VECTORIZING A BITMAP IMAGE
LESSON 7: IMPORTING AND VECTORIZING A BITMAP IMAGE In this lesson we ll learn how to import a bitmap logo, transform it into a vector and perform some editing on the vector to clean it up. The concepts
Crown Field Support Engineering
Crown Field Support Engineering Issue Date: 17 January 2014 Ref. No: GEN Go Online #0002 Subject: Basic Go Online w/ Audio Architect (Network Based Product) Applicability: The following step by step instructions
Pro/ENGINEER Wildfire 3.0 Tips
Pro/ENGINEER Wildfire 3.0 Tips W. Durfee Keyboard/mouse shortcuts CTRL+D Default view Middle-Button Spin SHIFT+Middle Pan CTRL+Middle Zoom (press, drag up-down) CTRL+Middle Turn (press, drag left-right)
Creating Acrobat Forms Acrobat 9 Professional
Creating Acrobat Forms Acrobat 9 Professional Acrobat forms typically have an origin from another program, like Word, Illustrator, Publisher etc. Doesn t matter. You design the form in another application
digital project V1,R4 Quick Start
digital project V1,R4 Quick Start Quick Starting Your Knowledge in Digital Project V1,R4 Nuri Miller May 2009 Copyright 2009 Gehry Technologies, Inc. Table of Contents Introduction...vi Creating a Part...2
Using Your Polyvision Digital Whiteboard and Walk-and-Talk
Using Your Polyvision Digital Whiteboard and Walk-and-Talk What is Walk-and-Talk? The Walk-and-Talk Digital Whiteboard is a remote control operated interactive system that connects to your computer. You
MET 306. Activity 8a. Mechanism Design Creo 2.0 Level 7 POINT A GROUND LINK LINK 1 LINK 2 LINK 3 POINT B 10/15/2010 1
Mechanism Design Creo 2.0 Level 7 POINT A LINK 1 GROUND LINK LINK 2 LINK 3 POINT B 10/15/2010 1 Download parts ground, key, link_1, link_2, link_3 and pulley from the V:/MET_306/Activity_8_Creo drive.
AutoCAD Architecture 2012 UK Content Tools
AutoCAD Architecture 2012 UK Content Tools Contents Contents... 1 Installation... 2 Loading the utilities... 2 Utilities Overview... 3 Menu and Toolbar... 3 Content Generation... 3 Content Publishing...
Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives
Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to
Petrel TIPS&TRICKS from SCM
Petrel TIPS&TRICKS from SCM Maps: Knowledge Worth Sharing Map Annotation A map is a graphic representation of some part of the earth. In our industry, it may represent either the surface or sub surface;