6 Systems Represented by Differential and Difference Equations

Size: px
Start display at page:

Download "6 Systems Represented by Differential and Difference Equations"

Transcription

1 6 Systems Represented by ifferential and ifference Equations An important class of linear, time-invariant systems consists of systems represented by linear constant-coefficient differential equations in continuous time and linear constant-coefficient difference equations in discrete time. Continuous-time linear, time-invariant systems that satisfy differential equations are very common; they include electrical circuits composed of resistors, inductors, and capacitors and mechanical systems composed of masses, springs, and dashpots. In discrete time a wide variety of data filtering, time series analysis, and digital filtering systems and algorithms are described by difference equations. In this lecture, we review the time-domain solution for linear constantcoefficient differential equations and show how the same basic strategy applies to difference equations. While this review is presented somewhat quickly, it is assumed that you have had some prior exposure to differential equations and their time-domain solution, perhaps in the context of circuits or mechanical systems. In any case, in Lecture 9 after we have developed the Fourier transform, we will see some more efficient (at least mathematically) ways of obtaining the solution. In considering the time-domain solution to linear constant-coefficient differential and difference equations, we should recognize a number of important features. Foremost is the fact that the differential or difference equation by itself specifies a family of responses only for a given input x(t). In particular we can always add to any solution another solution that satisfies the homogeneous equation corresponding to x(t) or x(n) being zero. Thus, for unique specification of a system, in addition to the differential or difference equation some auxiliary conditions (for example, a set of initial conditions) are needed that will specify the arbitrary constants present in the homogeneous solution. In Lecture 5 we showed that a linear, time-invariant system has the property that if the input is zero for all time, then the output will also be zero for all time. Consequently, a linear, time-invariant system specified by a linear constant-coefficient differential or difference equation must have its auxiliary

2 Signals and Systems 6-2 conditions consistent with that property. If, in fact, the system is causal in addition to being linear and time-invariant, then the auxiliary conditions will correspond to the requirement of initial rest; that is, if the input is zero prior to some time, then the output must be zero at least until the same time. In the context of RLC circuits, for example, this would correspond to an assumption of no initial capacitor voltages or inductor currents prior to the time at which the input becomes nonzero. An important distinction between linear constant-coefficient differential equations associated with continuous-time systems and linear constant-coefficient difference equations associated with discrete-time systems is that for causal systems the difference equation can be reformulated as an explicit relationship that states how successive values of the output can be computed from previously computed output values and the input. This recursive procedure for calculating the response of a difference equation is extremely useful in implementing causal systems. However, it is important to recognize that either in algebraic terms or in terms of block diagrams, a difference equation can often be rearranged into other forms leading to implementations that may have particular advantages. For example, as illustrated in the lecture, the most direct representation of a difference equation in terms of a block diagram or algorithm is often not the most efficient. Since the order in which linear, time-invariant systems are cascaded is not important to the overall inputoutput response, the most direct representation can be rearranged so that its implementation requires significantly less memory or, equivalently, delay registers. In addition, there are many other rearrangements, each having particular advantages and disadvantages. Similar kinds of rearrangements of the block diagrams also apply to the block diagram realizations of linear constant-coefficient differential equations for continuous-time systems. Suggested Reading Section 3.5, Systems escribed by ifferential and ifference Equations, pages Section 3.6, Block-iagram Representations of LTI Systems escribed by ifferential and ifference Equations, pages

3 ifferential and ifference Equations LINEAR CONSTANT-COEFFICIENT IFFERENTIAL EQUATION Nth Order: N E: a k k=0 dk y(t) dtk M k=0 dkx(t) dt k 6.1 Nth-order linear constant-coefficient differential and difference equations. LINEAR CONSTANT-COEFFICIENT IFFERENCE EQUATION Nth Order: N E k=0 ak y[n-k] M =E k=0 bk x[n-k] N Ek=0 N k=0 dky(t) M a = -E dtk k=o dkyh(t) k k 0 dt dkx(t) k dtk (1) (Homogeneous Equation) (2) 6.2 Family of solutions for a linear constantcoefficient differential equation. Given x(t), if y (t) satisfies (1) then so does y,(t) + yh(t) where yh (t) satisfies (2) yp(t) A Particular solution yh (t) = Homogeneous solution

4 Signals and Systems 6-4 HOMOGENEOUS SOLUTION 6.3 Form of the homogeneous solution. N dkyh(t) 0 ak dtk k0o "guess" solution of the form Yh (t) = Aest N E ak A s k est = 0 k=0 N k=0 ak s k = 0 N roots s i i = 1,..., N Yh(t) = A 1 esit + A 2 es2t ANeSNt 6.4 Requirements on the auxiliary conditions for a linear constantcoefficient differential equation to correspond to a linear system or to a causal LTI system. Need N auxiliary conditions, e.g. y(t), dy(t) dt N -1 V(t), "" '..N - 1 at t = t e Linear system <=> auxiliary conditions = 0 ecausal, LTI <=> initial rest: if x(t) = 0 t <to then y(t) = 0 t<t 0

5 ifferential and ifference Equations MARKERBOAR 6.1 C% :SOk" 4 t'ov% ts ct I ' ikt LL CLo ukt) S CO L Lt) C L o + LV Ct CO ~& dt~ e + a o 'K 1 t~~43l&l* Ot A e 6.5 Family of solutions for a Nth-order linear constant-coefficient difference equation.

6 Signals and Systems Form of the homogeneous solution. 6.7 Requirements on the auxiliary conditions for a linear constantcoefficient difference equation to correspond to a linear system or to a causal LTI system.

7 ifferential and ifference Equations 6-7 ENCE EQUATION 6.8 Recursive causal solution to a linear constant-coefficient difference equation. MARKERBOAR 6.2

8 Signals and Systems 6-8 x [n] - y [n] 6.9 evelopment of the x [n1- A y [n -1) block diagram representation of the recursive solution. elays associated with the input and output. x [n-2] y [n-2] x [n-n] y[n-n] x[n] b- I y[n] b 6.10 x[n-] Incorporation of the 1 y[n-1) coefficient multiplication. x [n-2] b-a 2 y [n -2) x [n -N] y [n -N]

9 ifferential and ifference Equations x [n y [n] 6.11 Forming the sums of the weighted, delayed sequences. x [n [n-n] 6.12 Complete block diagram. This form is often referred to as the direct form I implementation.

10 Signals and Systems Interchanging the order in which the two segments of the block diagram of Transparency 6.12 are cascaded. y n 6.14 Result of combining the two chains of delays in Transparency This form is often referred to as the direct form II implementation.

11 ifferential and ifference Equations 6-11 MARKERBOAR 6.3 (a) 6.15 irect form I block diagram representation of a linear constant-coefficient differential equation.

12 Signals and Systems 6-12 / N bn 6.16 Resulting block diagram when the order of the two subsystems in Transparency 6.15 is reversed. x (t y( t) 6.17 The result of combining the two chains of integrators in Transparency This form is often referred to as the direct form II.

13 CA ~ <Vt ifferential and ifference Equations MARKERBOAR 6.3 (b) ci vt~ cii~l*~ <5 7~ tskt4y&~4t) S I K C ej$adit*w 6, icl sti t 0' - Needt wkber vat. L~i I 5 -t Lii kinit A C-&Aflmde%5 7.TI %46 ((K A

14 MIT OpenCourseWare Resource: Signals and Systems Professor Alan V. Oppenheim The following may not correspond to a particular course on MIT OpenCourseWare, but has been provided by the author as an individual learning resource. For information about citing these materials or our Terms of Use, visit:

3 Signals and Systems: Part II

3 Signals and Systems: Part II 3 Signals and Systems: Part II Recommended Problems P3.1 Sketch each of the following signals. (a) x[n] = b[n] + 3[n - 3] (b) x[n] = u[n] - u[n - 5] (c) x[n] = 6[n] + 1n + (i)2 [n - 2] + (i)ag[n - 3] (d)

More information

10 Discrete-Time Fourier Series

10 Discrete-Time Fourier Series 10 Discrete-Time Fourier Series In this and the next lecture we parallel for discrete time the discussion of the last three lectures for continuous time. Specifically, we consider the representation of

More information

1.1 Discrete-Time Fourier Transform

1.1 Discrete-Time Fourier Transform 1.1 Discrete-Time Fourier Transform The discrete-time Fourier transform has essentially the same properties as the continuous-time Fourier transform, and these properties play parallel roles in continuous

More information

UNIVERSITY OF CALIFORNIA, SAN DIEGO Electrical & Computer Engineering Department ECE 101 - Fall 2010 Linear Systems Fundamentals

UNIVERSITY OF CALIFORNIA, SAN DIEGO Electrical & Computer Engineering Department ECE 101 - Fall 2010 Linear Systems Fundamentals UNIVERSITY OF CALIFORNIA, SAN DIEGO Electrical & Computer Engineering Department ECE 101 - Fall 2010 Linear Systems Fundamentals FINAL EXAM WITH SOLUTIONS (YOURS!) You are allowed one 2-sided sheet of

More information

9 Fourier Transform Properties

9 Fourier Transform Properties 9 Fourier Transform Properties The Fourier transform is a major cornerstone in the analysis and representation of signals and linear, time-invariant systems, and its elegance and importance cannot be overemphasized.

More information

2 Signals and Systems: Part I

2 Signals and Systems: Part I 2 Signals and Systems: Part I In this lecture, we consider a number of basic signals that will be important building blocks later in the course. Specifically, we discuss both continuoustime and discrete-time

More information

1 2 3 1 1 2 x = + x 2 + x 4 1 0 1

1 2 3 1 1 2 x = + x 2 + x 4 1 0 1 (d) If the vector b is the sum of the four columns of A, write down the complete solution to Ax = b. 1 2 3 1 1 2 x = + x 2 + x 4 1 0 0 1 0 1 2. (11 points) This problem finds the curve y = C + D 2 t which

More information

Discrete-Time Signals and Systems

Discrete-Time Signals and Systems 2 Discrete-Time Signals and Systems 2.0 INTRODUCTION The term signal is generally applied to something that conveys information. Signals may, for example, convey information about the state or behavior

More information

LS.6 Solution Matrices

LS.6 Solution Matrices LS.6 Solution Matrices In the literature, solutions to linear systems often are expressed using square matrices rather than vectors. You need to get used to the terminology. As before, we state the definitions

More information

UNIVERSITY OF CALIFORNIA, SAN DIEGO Electrical & Computer Engineering Department ECE 101 - Fall 2009 Linear Systems Fundamentals

UNIVERSITY OF CALIFORNIA, SAN DIEGO Electrical & Computer Engineering Department ECE 101 - Fall 2009 Linear Systems Fundamentals UNIVERSITY OF CALIFORNIA, SAN DIEGO Electrical & Computer Engineering Department ECE 101 - Fall 2009 Linear Systems Fundamentals MIDTERM EXAM You are allowed one 2-sided sheet of notes. No books, no other

More information

MAS.836 HOW TO BIAS AN OP-AMP

MAS.836 HOW TO BIAS AN OP-AMP MAS.836 HOW TO BIAS AN OP-AMP Op-Amp Circuits: Bias, in an electronic circuit, describes the steady state operating characteristics with no signal being applied. In an op-amp circuit, the operating characteristic

More information

Frequency Response of FIR Filters

Frequency Response of FIR Filters Frequency Response of FIR Filters Chapter 6 This chapter continues the study of FIR filters from Chapter 5, but the emphasis is frequency response, which relates to how the filter responds to an input

More information

NETWORK STRUCTURES FOR IIR SYSTEMS. Solution 12.1

NETWORK STRUCTURES FOR IIR SYSTEMS. Solution 12.1 NETWORK STRUCTURES FOR IIR SYSTEMS Solution 12.1 (a) Direct Form I (text figure 6.10) corresponds to first implementing the right-hand side of the difference equation (i.e. the eros) followed by the left-hand

More information

T = 10-' s. p(t)= ( (t-nt), T= 3. n=-oo. Figure P16.2

T = 10-' s. p(t)= ( (t-nt), T= 3. n=-oo. Figure P16.2 16 Sampling Recommended Problems P16.1 The sequence x[n] = (-1)' is obtained by sampling the continuous-time sinusoidal signal x(t) = cos oot at 1-ms intervals, i.e., cos(oont) = (-1)", Determine three

More information

(Refer Slide Time: 01:11-01:27)

(Refer Slide Time: 01:11-01:27) Digital Signal Processing Prof. S. C. Dutta Roy Department of Electrical Engineering Indian Institute of Technology, Delhi Lecture - 6 Digital systems (contd.); inverse systems, stability, FIR and IIR,

More information

3.1 State Space Models

3.1 State Space Models 31 State Space Models In this section we study state space models of continuous-time linear systems The corresponding results for discrete-time systems, obtained via duality with the continuous-time models,

More information

2.161 Signal Processing: Continuous and Discrete Fall 2008

2.161 Signal Processing: Continuous and Discrete Fall 2008 MT OpenCourseWare http://ocw.mit.edu.6 Signal Processing: Continuous and Discrete Fall 00 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. MASSACHUSETTS

More information

San José State University Department of Electrical Engineering EE 112, Linear Systems, Spring 2010

San José State University Department of Electrical Engineering EE 112, Linear Systems, Spring 2010 San José State University Department of Electrical Engineering EE 112, Linear Systems, Spring 2010 Instructor: Robert H. Morelos-Zaragoza Office Location: ENGR 373 Telephone: (408) 924-3879 Email: robert.morelos-zaragoza@sjsu.edu

More information

SGN-1158 Introduction to Signal Processing Test. Solutions

SGN-1158 Introduction to Signal Processing Test. Solutions SGN-1158 Introduction to Signal Processing Test. Solutions 1. Convolve the function ( ) with itself and show that the Fourier transform of the result is the square of the Fourier transform of ( ). (Hints:

More information

Lecture 7 Circuit analysis via Laplace transform

Lecture 7 Circuit analysis via Laplace transform S. Boyd EE12 Lecture 7 Circuit analysis via Laplace transform analysis of general LRC circuits impedance and admittance descriptions natural and forced response circuit analysis with impedances natural

More information

Solutions to Linear First Order ODE s

Solutions to Linear First Order ODE s First Order Linear Equations In the previous session we learned that a first order linear inhomogeneous ODE for the unknown function x = x(t), has the standard form x + p(t)x = q(t) () (To be precise we

More information

Em bedded DSP : I ntroduction to Digital Filters

Em bedded DSP : I ntroduction to Digital Filters Embedded DSP : Introduction to Digital Filters 1 Em bedded DSP : I ntroduction to Digital Filters Digital filters are a important part of DSP. In fact their extraordinary performance is one of the keys

More information

PYKC Jan-7-10. Lecture 1 Slide 1

PYKC Jan-7-10. Lecture 1 Slide 1 Aims and Objectives E 2.5 Signals & Linear Systems Peter Cheung Department of Electrical & Electronic Engineering Imperial College London! By the end of the course, you would have understood: Basic signal

More information

Second Order Linear Nonhomogeneous Differential Equations; Method of Undetermined Coefficients. y + p(t) y + q(t) y = g(t), g(t) 0.

Second Order Linear Nonhomogeneous Differential Equations; Method of Undetermined Coefficients. y + p(t) y + q(t) y = g(t), g(t) 0. Second Order Linear Nonhomogeneous Differential Equations; Method of Undetermined Coefficients We will now turn our attention to nonhomogeneous second order linear equations, equations with the standard

More information

4 Convolution. Solutions to Recommended Problems

4 Convolution. Solutions to Recommended Problems 4 Convolution Solutions to Recommended Problems S4.1 The given input in Figure S4.1-1 can be expressed as linear combinations of xi[n], x 2 [n], X 3 [n]. x,[ n] 0 2 Figure S4.1-1 (a) x 4[n] = 2x 1 [n]

More information

Linear Systems. Signals and Systems

Linear Systems. Signals and Systems CHAPTER 5 Linear s Most DSP techniques are based on a divide-and-conquer strategy called superposition. The signal being processed is broken into simple components, each component is processed individually,

More information

Lecture 8 ELE 301: Signals and Systems

Lecture 8 ELE 301: Signals and Systems Lecture 8 ELE 3: Signals and Systems Prof. Paul Cuff Princeton University Fall 2-2 Cuff (Lecture 7) ELE 3: Signals and Systems Fall 2-2 / 37 Properties of the Fourier Transform Properties of the Fourier

More information

Step response of an RLC series circuit

Step response of an RLC series circuit School of Engineering Department of Electrical and Computer Engineering 332:224 Principles of Electrical Engineering II Laboratory Experiment 5 Step response of an RLC series circuit 1 Introduction Objectives

More information

7. Beats. sin( + λ) + sin( λ) = 2 cos(λ) sin( )

7. Beats. sin( + λ) + sin( λ) = 2 cos(λ) sin( ) 34 7. Beats 7.1. What beats are. Musicians tune their instruments using beats. Beats occur when two very nearby pitches are sounded simultaneously. We ll make a mathematical study of this effect, using

More information

12.4 UNDRIVEN, PARALLEL RLC CIRCUIT*

12.4 UNDRIVEN, PARALLEL RLC CIRCUIT* + v C C R L - v i L FIGURE 12.24 The parallel second-order RLC circuit shown in Figure 2.14a. 12.4 UNDRIVEN, PARALLEL RLC CIRCUIT* We will now analyze the undriven parallel RLC circuit shown in Figure

More information

Equivalent Circuits and Transfer Functions

Equivalent Circuits and Transfer Functions R eq isc Equialent Circuits and Transfer Functions Samantha R Summerson 14 September, 009 1 Equialent Circuits eq ± Figure 1: Théenin equialent circuit. i sc R eq oc Figure : Mayer-Norton equialent circuit.

More information

24 Butterworth Filters

24 Butterworth Filters 24 Butterworth Filters To illustrate some of the ideas developed in Lecture 23, we introduce in this lecture a simple and particularly useful class of filters referred to as Butterworthfilters. Filters

More information

MATRIX ALGEBRA AND SYSTEMS OF EQUATIONS

MATRIX ALGEBRA AND SYSTEMS OF EQUATIONS MATRIX ALGEBRA AND SYSTEMS OF EQUATIONS Systems of Equations and Matrices Representation of a linear system The general system of m equations in n unknowns can be written a x + a 2 x 2 + + a n x n b a

More information

ES250: Electrical Science. HW7: Energy Storage Elements

ES250: Electrical Science. HW7: Energy Storage Elements ES250: Electrical Science HW7: Energy Storage Elements Introduction This chapter introduces two more circuit elements, the capacitor and the inductor whose elements laws involve integration or differentiation;

More information

General Framework for an Iterative Solution of Ax b. Jacobi s Method

General Framework for an Iterative Solution of Ax b. Jacobi s Method 2.6 Iterative Solutions of Linear Systems 143 2.6 Iterative Solutions of Linear Systems Consistent linear systems in real life are solved in one of two ways: by direct calculation (using a matrix factorization,

More information

First Order Circuits. EENG223 Circuit Theory I

First Order Circuits. EENG223 Circuit Theory I First Order Circuits EENG223 Circuit Theory I First Order Circuits A first-order circuit can only contain one energy storage element (a capacitor or an inductor). The circuit will also contain resistance.

More information

10.2 ITERATIVE METHODS FOR SOLVING LINEAR SYSTEMS. The Jacobi Method

10.2 ITERATIVE METHODS FOR SOLVING LINEAR SYSTEMS. The Jacobi Method 578 CHAPTER 1 NUMERICAL METHODS 1. ITERATIVE METHODS FOR SOLVING LINEAR SYSTEMS As a numerical technique, Gaussian elimination is rather unusual because it is direct. That is, a solution is obtained after

More information

Using the Impedance Method

Using the Impedance Method Using the Impedance Method The impedance method allows us to completely eliminate the differential equation approach for the determination of the response of circuits. In fact the impedance method even

More information

19.7. Applications of Differential Equations. Introduction. Prerequisites. Learning Outcomes. Learning Style

19.7. Applications of Differential Equations. Introduction. Prerequisites. Learning Outcomes. Learning Style Applications of Differential Equations 19.7 Introduction Blocks 19.2 to 19.6 have introduced several techniques for solving commonly-occurring firstorder and second-order ordinary differential equations.

More information

min ǫ = E{e 2 [n]}. (11.2)

min ǫ = E{e 2 [n]}. (11.2) C H A P T E R 11 Wiener Filtering INTRODUCTION In this chapter we will consider the use of LTI systems in order to perform minimum mean-square-error (MMSE) estimation of a WSS random process of interest,

More information

Lecture 7: Finding Lyapunov Functions 1

Lecture 7: Finding Lyapunov Functions 1 Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.243j (Fall 2003): DYNAMICS OF NONLINEAR SYSTEMS by A. Megretski Lecture 7: Finding Lyapunov Functions 1

More information

CITY UNIVERSITY LONDON. BEng Degree in Computer Systems Engineering Part II BSc Degree in Computer Systems Engineering Part III PART 2 EXAMINATION

CITY UNIVERSITY LONDON. BEng Degree in Computer Systems Engineering Part II BSc Degree in Computer Systems Engineering Part III PART 2 EXAMINATION No: CITY UNIVERSITY LONDON BEng Degree in Computer Systems Engineering Part II BSc Degree in Computer Systems Engineering Part III PART 2 EXAMINATION ENGINEERING MATHEMATICS 2 (resit) EX2005 Date: August

More information

Solving Systems of Linear Equations

Solving Systems of Linear Equations LECTURE 5 Solving Systems of Linear Equations Recall that we introduced the notion of matrices as a way of standardizing the expression of systems of linear equations In today s lecture I shall show how

More information

8.2. Solution by Inverse Matrix Method. Introduction. Prerequisites. Learning Outcomes

8.2. Solution by Inverse Matrix Method. Introduction. Prerequisites. Learning Outcomes Solution by Inverse Matrix Method 8.2 Introduction The power of matrix algebra is seen in the representation of a system of simultaneous linear equations as a matrix equation. Matrix algebra allows us

More information

Applications of Second-Order Differential Equations

Applications of Second-Order Differential Equations Applications of Second-Order Differential Equations Second-order linear differential equations have a variety of applications in science and engineering. In this section we explore two of them: the vibration

More information

Discrete Mathematics: Homework 7 solution. Due: 2011.6.03

Discrete Mathematics: Homework 7 solution. Due: 2011.6.03 EE 2060 Discrete Mathematics spring 2011 Discrete Mathematics: Homework 7 solution Due: 2011.6.03 1. Let a n = 2 n + 5 3 n for n = 0, 1, 2,... (a) (2%) Find a 0, a 1, a 2, a 3 and a 4. (b) (2%) Show that

More information

Ver 3537 E1.1 Analysis of Circuits (2014) E1.1 Circuit Analysis. Problem Sheet 1 (Lectures 1 & 2)

Ver 3537 E1.1 Analysis of Circuits (2014) E1.1 Circuit Analysis. Problem Sheet 1 (Lectures 1 & 2) Ver 3537 E. Analysis of Circuits () Key: [A]= easy... [E]=hard E. Circuit Analysis Problem Sheet (Lectures & ). [A] One of the following circuits is a series circuit and the other is a parallel circuit.

More information

EXAMPLE 8: An Electrical System (Mechanical-Electrical Analogy)

EXAMPLE 8: An Electrical System (Mechanical-Electrical Analogy) EXAMPLE 8: An Electrical System (Mechanical-Electrical Analogy) A completely analogous procedure can be used to find the state equations of electrical systems (and, ultimately, electro-mechanical systems

More information

V out. Figure 1: A voltage divider on the left, and potentiometer on the right.

V out. Figure 1: A voltage divider on the left, and potentiometer on the right. Living with the Lab Fall 202 Voltage Dividers and Potentiometers Gerald Recktenwald v: November 26, 202 gerry@me.pdx.edu Introduction Voltage dividers and potentiometers are passive circuit components

More information

Slide 10.1. Basic system Models

Slide 10.1. Basic system Models Slide 10.1 Basic system Models Objectives: Devise Models from basic building blocks of mechanical, electrical, fluid and thermal systems Recognize analogies between mechanical, electrical, fluid and thermal

More information

MATHEMATICAL SURVEY AND APPLICATION OF THE CROSS-AMBIGUITY FUNCTION

MATHEMATICAL SURVEY AND APPLICATION OF THE CROSS-AMBIGUITY FUNCTION MATHEMATICAL SURVEY AND APPLICATION OF THE CROSS-AMBIGUITY FUNCTION Dennis Vandenberg Department of Mathematical Sciences Indiana University South Bend E-mail Address: djvanden@iusb.edu Submitted to the

More information

S-Parameters and Related Quantities Sam Wetterlin 10/20/09

S-Parameters and Related Quantities Sam Wetterlin 10/20/09 S-Parameters and Related Quantities Sam Wetterlin 10/20/09 Basic Concept of S-Parameters S-Parameters are a type of network parameter, based on the concept of scattering. The more familiar network parameters

More information

30. Bode Plots. Introduction

30. Bode Plots. Introduction 0. Bode Plots Introduction Each of the circuits in this problem set is represented by a magnitude Bode plot. The network function provides a connection between the Bode plot and the circuit. To solve these

More information

G(s) = Y (s)/u(s) In this representation, the output is always the Transfer function times the input. Y (s) = G(s)U(s).

G(s) = Y (s)/u(s) In this representation, the output is always the Transfer function times the input. Y (s) = G(s)U(s). Transfer Functions The transfer function of a linear system is the ratio of the Laplace Transform of the output to the Laplace Transform of the input, i.e., Y (s)/u(s). Denoting this ratio by G(s), i.e.,

More information

1. True or False? A voltage level in the range 0 to 2 volts is interpreted as a binary 1.

1. True or False? A voltage level in the range 0 to 2 volts is interpreted as a binary 1. File: chap04, Chapter 04 1. True or False? A voltage level in the range 0 to 2 volts is interpreted as a binary 1. 2. True or False? A gate is a device that accepts a single input signal and produces one

More information

Chapter 8 - Power Density Spectrum

Chapter 8 - Power Density Spectrum EE385 Class Notes 8/8/03 John Stensby Chapter 8 - Power Density Spectrum Let X(t) be a WSS random process. X(t) has an average power, given in watts, of E[X(t) ], a constant. his total average power is

More information

Math 55: Discrete Mathematics

Math 55: Discrete Mathematics Math 55: Discrete Mathematics UC Berkeley, Spring 2012 Homework # 9, due Wednesday, April 11 8.1.5 How many ways are there to pay a bill of 17 pesos using a currency with coins of values of 1 peso, 2 pesos,

More information

Math 2280 - Assignment 6

Math 2280 - Assignment 6 Math 2280 - Assignment 6 Dylan Zwick Spring 2014 Section 3.8-1, 3, 5, 8, 13 Section 4.1-1, 2, 13, 15, 22 Section 4.2-1, 10, 19, 28 1 Section 3.8 - Endpoint Problems and Eigenvalues 3.8.1 For the eigenvalue

More information

System Modeling and Control for Mechanical Engineers

System Modeling and Control for Mechanical Engineers Session 1655 System Modeling and Control for Mechanical Engineers Hugh Jack, Associate Professor Padnos School of Engineering Grand Valley State University Grand Rapids, MI email: jackh@gvsu.edu Abstract

More information

Chapter 12 Modal Decomposition of State-Space Models 12.1 Introduction The solutions obtained in previous chapters, whether in time domain or transfor

Chapter 12 Modal Decomposition of State-Space Models 12.1 Introduction The solutions obtained in previous chapters, whether in time domain or transfor Lectures on Dynamic Systems and Control Mohammed Dahleh Munther A. Dahleh George Verghese Department of Electrical Engineering and Computer Science Massachuasetts Institute of Technology 1 1 c Chapter

More information

CIRCUITS LABORATORY EXPERIMENT 3. AC Circuit Analysis

CIRCUITS LABORATORY EXPERIMENT 3. AC Circuit Analysis CIRCUITS LABORATORY EXPERIMENT 3 AC Circuit Analysis 3.1 Introduction The steady-state behavior of circuits energized by sinusoidal sources is an important area of study for several reasons. First, the

More information

Solving Systems of Linear Equations

Solving Systems of Linear Equations LECTURE 5 Solving Systems of Linear Equations Recall that we introduced the notion of matrices as a way of standardizing the expression of systems of linear equations In today s lecture I shall show how

More information

Computer Graphics. Geometric Modeling. Page 1. Copyright Gotsman, Elber, Barequet, Karni, Sheffer Computer Science - Technion. An Example.

Computer Graphics. Geometric Modeling. Page 1. Copyright Gotsman, Elber, Barequet, Karni, Sheffer Computer Science - Technion. An Example. An Example 2 3 4 Outline Objective: Develop methods and algorithms to mathematically model shape of real world objects Categories: Wire-Frame Representation Object is represented as as a set of points

More information

2.6 The driven oscillator

2.6 The driven oscillator 2.6. THE DRIVEN OSCILLATOR 131 2.6 The driven oscillator We would like to understand what happens when we apply forces to the harmonic oscillator. That is, we want to solve the equation M d2 x(t) 2 + γ

More information

School of Engineering Department of Electrical and Computer Engineering

School of Engineering Department of Electrical and Computer Engineering 1 School of Engineering Department of Electrical and Computer Engineering 332:223 Principles of Electrical Engineering I Laboratory Experiment #4 Title: Operational Amplifiers 1 Introduction Objectives

More information

PHASOR DIAGRAMS HANDS-ON RELAY SCHOOL WSU PULLMAN, WA. RON ALEXANDER - BPA

PHASOR DIAGRAMS HANDS-ON RELAY SCHOOL WSU PULLMAN, WA. RON ALEXANDER - BPA PHASOR DIAGRAMS HANDS-ON RELAY SCHOOL WSU PULLMAN, WA. RON ALEXANDER - BPA What are phasors??? In normal practice, the phasor represents the rms maximum value of the positive half cycle of the sinusoid

More information

Circuits with inductors and alternating currents. Chapter 20 #45, 46, 47, 49

Circuits with inductors and alternating currents. Chapter 20 #45, 46, 47, 49 Circuits with inductors and alternating currents Chapter 20 #45, 46, 47, 49 RL circuits Ch. 20 (last section) Symbol for inductor looks like a spring. An inductor is a circuit element that has a large

More information

Frequency response: Resonance, Bandwidth, Q factor

Frequency response: Resonance, Bandwidth, Q factor Frequency response: esonance, Bandwidth, Q factor esonance. Let s continue the exploration of the frequency response of circuits by investigating the series circuit shown on Figure. C + V - Figure The

More information

Properties of electrical signals

Properties of electrical signals DC Voltage Component (Average voltage) Properties of electrical signals v(t) = V DC + v ac (t) V DC is the voltage value displayed on a DC voltmeter Triangular waveform DC component Half-wave rectifier

More information

3. Interpolation. Closing the Gaps of Discretization... Beyond Polynomials

3. Interpolation. Closing the Gaps of Discretization... Beyond Polynomials 3. Interpolation Closing the Gaps of Discretization... Beyond Polynomials Closing the Gaps of Discretization... Beyond Polynomials, December 19, 2012 1 3.3. Polynomial Splines Idea of Polynomial Splines

More information

Section 1.7 22 Continued

Section 1.7 22 Continued Section 1.5 23 A homogeneous equation is always consistent. TRUE - The trivial solution is always a solution. The equation Ax = 0 gives an explicit descriptions of its solution set. FALSE - The equation

More information

Second Order Linear Partial Differential Equations. Part I

Second Order Linear Partial Differential Equations. Part I Second Order Linear Partial Differential Equations Part I Second linear partial differential equations; Separation of Variables; - point boundary value problems; Eigenvalues and Eigenfunctions Introduction

More information

TTT4120 Digital Signal Processing Suggested Solution to Exam Fall 2008

TTT4120 Digital Signal Processing Suggested Solution to Exam Fall 2008 Norwegian University of Science and Technology Department of Electronics and Telecommunications TTT40 Digital Signal Processing Suggested Solution to Exam Fall 008 Problem (a) The input and the input-output

More information

Course overview Processamento de sinais 2009/10 LEA

Course overview Processamento de sinais 2009/10 LEA Course overview Processamento de sinais 2009/10 LEA João Pedro Gomes jpg@isr.ist.utl.pt Instituto Superior Técnico Processamento de sinais MEAer (IST) Course overview 1 / 19 Course overview Motivation:

More information

Continued Fractions and the Euclidean Algorithm

Continued Fractions and the Euclidean Algorithm Continued Fractions and the Euclidean Algorithm Lecture notes prepared for MATH 326, Spring 997 Department of Mathematics and Statistics University at Albany William F Hammond Table of Contents Introduction

More information

FFT Algorithms. Chapter 6. Contents 6.1

FFT Algorithms. Chapter 6. Contents 6.1 Chapter 6 FFT Algorithms Contents Efficient computation of the DFT............................................ 6.2 Applications of FFT................................................... 6.6 Computing DFT

More information

Dynamic Eigenvalues for Scalar Linear Time-Varying Systems

Dynamic Eigenvalues for Scalar Linear Time-Varying Systems Dynamic Eigenvalues for Scalar Linear Time-Varying Systems P. van der Kloet and F.L. Neerhoff Department of Electrical Engineering Delft University of Technology Mekelweg 4 2628 CD Delft The Netherlands

More information

1.4 Fast Fourier Transform (FFT) Algorithm

1.4 Fast Fourier Transform (FFT) Algorithm 74 CHAPTER AALYSIS OF DISCRETE-TIME LIEAR TIME-IVARIAT SYSTEMS 4 Fast Fourier Transform (FFT Algorithm Fast Fourier Transform, or FFT, is any algorithm for computing the -point DFT with a computational

More information

Introduction. Appendix D Mathematical Induction D1

Introduction. Appendix D Mathematical Induction D1 Appendix D Mathematical Induction D D Mathematical Induction Use mathematical induction to prove a formula. Find a sum of powers of integers. Find a formula for a finite sum. Use finite differences to

More information

Final Year Project Progress Report. Frequency-Domain Adaptive Filtering. Myles Friel. Supervisor: Dr.Edward Jones

Final Year Project Progress Report. Frequency-Domain Adaptive Filtering. Myles Friel. Supervisor: Dr.Edward Jones Final Year Project Progress Report Frequency-Domain Adaptive Filtering Myles Friel 01510401 Supervisor: Dr.Edward Jones Abstract The Final Year Project is an important part of the final year of the Electronic

More information

Overview. Essential Questions. Precalculus, Quarter 4, Unit 4.5 Build Arithmetic and Geometric Sequences and Series

Overview. Essential Questions. Precalculus, Quarter 4, Unit 4.5 Build Arithmetic and Geometric Sequences and Series Sequences and Series Overview Number of instruction days: 4 6 (1 day = 53 minutes) Content to Be Learned Write arithmetic and geometric sequences both recursively and with an explicit formula, use them

More information

Lecture 13 Linear quadratic Lyapunov theory

Lecture 13 Linear quadratic Lyapunov theory EE363 Winter 28-9 Lecture 13 Linear quadratic Lyapunov theory the Lyapunov equation Lyapunov stability conditions the Lyapunov operator and integral evaluating quadratic integrals analysis of ARE discrete-time

More information

Systems of Linear Equations

Systems of Linear Equations Systems of Linear Equations Beifang Chen Systems of linear equations Linear systems A linear equation in variables x, x,, x n is an equation of the form a x + a x + + a n x n = b, where a, a,, a n and

More information

The Heat Equation. Lectures INF2320 p. 1/88

The Heat Equation. Lectures INF2320 p. 1/88 The Heat Equation Lectures INF232 p. 1/88 Lectures INF232 p. 2/88 The Heat Equation We study the heat equation: u t = u xx for x (,1), t >, (1) u(,t) = u(1,t) = for t >, (2) u(x,) = f(x) for x (,1), (3)

More information

ELECTRICAL ENGINEERING

ELECTRICAL ENGINEERING EE ELECTRICAL ENGINEERING See beginning of Section H for abbreviations, course numbers and coding. The * denotes labs which are held on alternate weeks. A minimum grade of C is required for all prerequisite

More information

RLC Circuit Response and Analysis (Using State Space Method)

RLC Circuit Response and Analysis (Using State Space Method) 48 RLC Circuit Response and Analysis (Using State Space Method) Mohazzab 1 JAVED, Hussain 1 AFTAB, Muhammad 1 QASIM, Mohsin 1 SATTAR 1 Engineering Department, PAF-KIET, Karachi, Sindh, Pakistan Abstract--

More information

Nonlinear Systems of Ordinary Differential Equations

Nonlinear Systems of Ordinary Differential Equations Differential Equations Massoud Malek Nonlinear Systems of Ordinary Differential Equations Dynamical System. A dynamical system has a state determined by a collection of real numbers, or more generally

More information

How To Calculate The Power Gain Of An Opamp

How To Calculate The Power Gain Of An Opamp A. M. Niknejad University of California, Berkeley EE 100 / 42 Lecture 8 p. 1/23 EE 42/100 Lecture 8: Op-Amps ELECTRONICS Rev C 2/8/2012 (9:54 AM) Prof. Ali M. Niknejad University of California, Berkeley

More information

MATRIX ALGEBRA AND SYSTEMS OF EQUATIONS. + + x 2. x n. a 11 a 12 a 1n b 1 a 21 a 22 a 2n b 2 a 31 a 32 a 3n b 3. a m1 a m2 a mn b m

MATRIX ALGEBRA AND SYSTEMS OF EQUATIONS. + + x 2. x n. a 11 a 12 a 1n b 1 a 21 a 22 a 2n b 2 a 31 a 32 a 3n b 3. a m1 a m2 a mn b m MATRIX ALGEBRA AND SYSTEMS OF EQUATIONS 1. SYSTEMS OF EQUATIONS AND MATRICES 1.1. Representation of a linear system. The general system of m equations in n unknowns can be written a 11 x 1 + a 12 x 2 +

More information

Curcuits and Differential Equaitons

Curcuits and Differential Equaitons Objective: Curcuits and Differential Equaitons Given a circuit, find the differential equation which describes that circuit. Solve that differential equation numerically (with SPICE, MATAB, or ISSIM) Ciruits

More information

Partial Fractions: Undetermined Coefficients

Partial Fractions: Undetermined Coefficients 1. Introduction Partial Fractions: Undetermined Coefficients Not every F(s) we encounter is in the Laplace table. Partial fractions is a method for re-writing F(s) in a form suitable for the use of the

More information

The Characteristic Polynomial

The Characteristic Polynomial Physics 116A Winter 2011 The Characteristic Polynomial 1 Coefficients of the characteristic polynomial Consider the eigenvalue problem for an n n matrix A, A v = λ v, v 0 (1) The solution to this problem

More information

Networks, instruments and data centres: what does your seismic (meta-) data really mean? Joachim Wassermann (LMU Munich)

Networks, instruments and data centres: what does your seismic (meta-) data really mean? Joachim Wassermann (LMU Munich) Networks, instruments and data centres: what does your seismic (meta-) data really mean? Joachim Wassermann (LMU Munich) Quest Workshop, Hveragerdi 2011 Why an issue? Seismic Networks: Data Exchange many

More information

MATH10212 Linear Algebra. Systems of Linear Equations. Definition. An n-dimensional vector is a row or a column of n numbers (or letters): a 1.

MATH10212 Linear Algebra. Systems of Linear Equations. Definition. An n-dimensional vector is a row or a column of n numbers (or letters): a 1. MATH10212 Linear Algebra Textbook: D. Poole, Linear Algebra: A Modern Introduction. Thompson, 2006. ISBN 0-534-40596-7. Systems of Linear Equations Definition. An n-dimensional vector is a row or a column

More information

5 Homogeneous systems

5 Homogeneous systems 5 Homogeneous systems Definition: A homogeneous (ho-mo-jeen -i-us) system of linear algebraic equations is one in which all the numbers on the right hand side are equal to : a x +... + a n x n =.. a m

More information

Lecture 24: Oscillators. Clapp Oscillator. VFO Startup

Lecture 24: Oscillators. Clapp Oscillator. VFO Startup Whites, EE 322 Lecture 24 Page 1 of 10 Lecture 24: Oscillators. Clapp Oscillator. VFO Startup Oscillators are circuits that produce periodic output voltages, such as sinusoids. They accomplish this feat

More information

DEGREE: Bachelor in Biomedical Engineering YEAR: 2 TERM: 2 WEEKLY PLANNING

DEGREE: Bachelor in Biomedical Engineering YEAR: 2 TERM: 2 WEEKLY PLANNING SESSION WEEK COURSE: Electronic Technology in Biomedicine DEGREE: Bachelor in Biomedical Engineering YEAR: 2 TERM: 2 WEEKLY PLANNING DESCRIPTION GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class

More information

The Membrane Equation

The Membrane Equation The Membrane Equation Professor David Heeger September 5, 2000 RC Circuits Figure 1A shows an RC (resistor, capacitor) equivalent circuit model for a patch of passive neural membrane. The capacitor represents

More information

Lecture 27: Mixers. Gilbert Cell

Lecture 27: Mixers. Gilbert Cell Whites, EE 322 Lecture 27 Page 1 of 9 Lecture 27: Mixers. Gilbert Cell Mixers shift the frequency spectrum of an input signal. This is an essential component in electrical communications (wireless or otherwise)

More information

DC-DC Converter Basics

DC-DC Converter Basics Page 1 of 16 Free Downloads / Design Tips / Java Calculators / App. Notes / Tutorials / Newsletter / Discussion / Components Database / Library / Power Links / Software / Technical Articles / On-Line Textbook

More information