Carlon Flexible Raceway Systems

Transcription

1 Carlon Flexible Raceway Systems Plenum-Gard Riser-Gard Hal-Free Riser-Gard General Purpose 87

2 Plenum-Gard Applications: Plenum, Riser, and General Purpose E FT-6 Rated Plenum-Gard is a UL Listed nonmetallic corrugated flexible conduit for use in Plenum, Riser and General Purpose applications. Plenum-Gard is manufactured from PVDF resin, which is extremely durable and resistant to abrasion and mechanical damage before/after cable installation. Technical Info: UL Standard 2024 Value Maximum Flame Propagation 5 ft. Max. Peak Optical Smoke Density 0.5 Max. Average Optical Smoke Density 0.15 Storage -4 F to 158 F Handling -4 F to 104 F No UV protection (not suitable for outdoor use) Do NOT store outside Plenum-Gard is listed to UL 2024 in accordance with the National Electrical Code for Plenum, Riser, General Purpose, and other cabling optical fiber /telecommunication applications as defined in Articles 725, 770, 800 and 820. Important: Installed cables must be plenum rated and the UL Listing must be printed on the product. Abandoned cables MUST be removed (Reference NEC). NEW 1/2"& 3/4" with tape Standard Stock Reels Min. Reel Wt. per Pull Size Reel Reel Wt. 100 ft. Color Part No. Tape (F x W) Type Length (lbs.) (lbs.) 3 /4" Orange CE4X Empty 36" x 24" W Orange CE4X1-1000S Empty 36" x 24" W Orange CF4X1C lb. 36" x 24" W Orange CF4X1C lb. 48" x 32" W " Orange CF4X1C lb. 48" x 32" W Orange CF4X1C lb. 66" x 41" W Orange CF4X1C lb. 72" x 41" W Orange CF4X1C lb. 82" x 41" W Orange CG4X1C lb. 36" x 24" W Orange CG4X1C lb. 48" x 32" W /4" Orange CG4X1C lb. 48" x 46" W Orange CG4X1C lb. 66" x 41" W Orange CG4X1C lb. 96" x 41" W Orange CG4X1-900S Empty 48" x 32" W /2" 2" Orange CH4X1C lb. 48" x 32" W Orange CH4X1C lb. 48" x 46" W Orange CH4X1C lb. 82" x 41" W Orange CJ4X1C lb. 48" x 32" W Orange CJ4X1C lb. 48" x 46" W Orange CJ4X1C lb. 82" x 41" W Orange CJ4X1C lb. 82" x 41" W W = Wood 88

3 Features: For use in Plenum areas per Articles 725, 770, 800 and 820. Sizes 1 /2" through 2" Standard Stock Coils Pre-installed pull tape available in sizes 1/2" through 2" Outside Diameters meet IPS Dimensions Plenum-Gard UL Listed raceway meeting UL 2024 Footage sequentially marked Single peak design 3 /4" 1" 1 1 /4" 1 1 /2" 2" Pull Coil Wt. per Color Part No. Tape Length (ft.) 100 ft. (lbs.) Orange CE4X1-350* Empty Orange CF4X1C-100* 900 lb Orange CF4X1C-250* 900 lb Orange CF4X1-250 Empty Orange CF4X1-250S* Empty Orange CG4X1C-200* 900 lb Orange CH4X1C-150* 900 lb Orange CJ4X1C-100* 900 lb * Overnight Shippable Specifications I.D. Min. Max. Min. Bend Size Min. Ref. O.D. O.D. Radius 1/2" " 3/4" " 1" " 1 1 /4" " 1 1 /2" " 2" " Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length C = Plenum-Gard D = 1 /2" 4 = Corrugated X = Standard 1 = Orange C = 900 lb. Tape Example E = 3 /4" 2 = Black = Feet F = 1" 3 = Gray -1000S = 1000 Feet Split G = 1 1 /4" 4 = White H = 1 1 /2" J = 2" 5 = Blue 7 = Yellow 8 = Red Custom Orders are not returnable Custom lengths are available in minimum order quantities of 1000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Gray, Red, White and Yellow Two, three, or four way parallel Split Duct Custom print line 89

4 Riser-Gard E FT-4 Rated Applications: Riser and General Purpose Riser-Gard is a nonmetallic flexible raceway for use in Riser and General Purpose applications. Riser-Gard is UL Listed and is available with tape pre-installed. Riser-Gard is listed to UL 2024 Standard for Riser Applications or optical fiber/communications raceways. Technical Info: Riser-Gard is listed to UL 2024 in accordance with the National Electrical Code per Articles 725, 770, 800 and 820 for Riser, General Purpose, and other cabling optical fiber/telecommunication applications. Riser-Gard is suitable for use in vertical runs in a shaft or between floors, as well as areas other than the plenum. Important: Installed cables must be of suitable rating for the application. UL Listed to 2024 Test Method Maximum Value Maximum Flame Propagation UL ft. Maximum Air Temperature at 12 ft. UL F Standard Stock Reels Storage -4 F to 158 F Handling -4 F to 104 F No UV protection (not suitable for outdoor use) Do NOT store outside 3 /4" 1" 1 1 /4" 1 1 /2" 2" Reel Reel Product Pull Size Reel Reel Wt. Wt. per Color Part No. Tape (F x W) Type Length (lbs.) 100 ft. (lbs.) Orange DE4X Empty 36" x 24" W Orange DF4X1C-500R 900 lb. 42" x 24" W Orange DF4X1C lb. 48" x 32" W Orange DF4X1C lb. 48" x 32" W Orange DF4X1C lb. 48" x 46" W Orange DF4X1C lb. 66" x 41" W Orange DF4X1C lb. 72" x 41" W Orange DF4X1C lb. 72" x 45" S Orange DF4X1C lb. 84" x 45" S Orange DG4X1C lb. 48" x 32" W Orange DG4X1C-500R 900 lb. 42" x 24" W Orange DG4X1C lb. 48" x 46" W Orange DG4X1C lb. 48" x 46" W Orange DG4X1C lb. 66" x 41" W Orange DG4X1C lb. 72" x 45" S Orange DG4X1C lb. 84" x 46" W Orange DG4X1C lb. 96" x 45" S Orange DH4X1C lb. 48" x 46" W Orange DH4X1C lb. 82" x 45" S Orange DH4X1C lb. 84" x 45" S Orange DJ4X1C lb. 48" x 46" W Orange DJ4X1C lb. 82" x 41" W Orange DJ4X1C lb. 84" x 45" S W = Wood, S = Steel 90

5 Features: For use in Riser and General Purpose areas per Articles 725, 770, 800 and 820 of the NEC. Riser-Gard is also suitable for direct burial. Not approved for exposed applications. NOTE: UL has not evaluated Riser-Gard for this application. Standard Stock Coils UL Listed Raceway meeting UL 2024 Available in sizes 3/4" through 2" Pull tape can be factory pre-installed in 1" through 2" Riser-Gard Outside Diameters meet IPS Dimensions Footage sequentially marked 3 /4" 1" 1 1 /4" 1 1 /2" 2" Pull Coil Product Wt. per Color Part No. Tape Length (ft.) 100 ft. (lbs.) Orange DE4X1-350* Empty Orange DF4X1C-250* 900 lb Orange DF4X1C lb Orange DF4X1-250S* Empty Orange DG4X1-200 Empty Orange DG4X1C-200* 900 lb Orange DG4X1C lb Orange DG4X1-200S* Empty Orange DH4X1C-150* 900 lb Orange DJ4X1C-100* 900 lb * Overnight Shippable Specifications I.D. Min. Max. Min. Bend Size Min. Ref. O.D. O.D. Radius 3/4" " 1" " 1 1 /4" " 1 1 /2" /4" 2" /2" Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length D = Riser-Gard E = 3 /4" 4 = Corrugated X = Standard 1 = Orange C = 900 lb. Tape Example F = 1" 2 = Black = Feet G = 1 1 /4" 3 = Gray -1000S = 1000 Feet Split H = 1 1 /2" J = 2" 4 = White 5 = Blue 7 = Yellow 8 = Red Custom Orders are not returnable Custom lengths are available in minimum order quantities of 1000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Gray, Red, White and Yellow Two, three, or four way parallel Split Duct Custom print line 91

6 Hal-Free Riser-Gard Applications: Riser and General Purpose Standard Stock Reels E FT-4 Rated Hal-Free Riser-Gard is a halogen free nonmetallic flexible raceway for use in riser and general purpose applications. In the event of a fire, this product will not release halogen elements into the air, which makes it ideal for applications in tunnels, laboratories and high-tech environments. Features: Free from halogen elements Compliant with NEC Articles 725, 770, 800 and 820 Technical Info: Hal-Free Riser-Gard is listed to UL 2024 in accordance with NEC Articles 725, 770, 800 and 820. Custom lengths and split ducts are available upon request. Hal-Free Riser-Gard is available in white only. Available in sizes 1" through 2" Available in white only Sequentially marked footage UL Listed to 2024 Test Method Maximum Value Maximum Flame Propagation UL '6" Maximum Air Temperature UL F Storage and Handling -4 F to 150 F No UV protection (not suitable for outdoor use) Do NOT store outside 1" 1 1 /4" 1 1 /2" 2" Reel Reel Wt. per Part Nom. Nom. Pull Reel Reel Length Weight 100 ft. Color No. I.D. O.D. Tape Size Type (feet) (lbs.) (lbs.) White HF4X4C lb. 72" x 41" W White HG4X4C lb. 72" x 41" W White HH4X4C lb. 66" x 41" W White HJ4X4C lb. 82" x 41" W W = Wood Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length H = Hal-Free F = 1" 4 = Corrugated X = Standard 4 = White C = 900 lb. Tape Example Riser-Gard G = 1 1 /4" = Feet H = 1 1 /2" -1000S = 1000 Feet Split J = 2" Custom orders not returnable Custom lengths available in minimum order quantities of 1000 ft. 92

7 General Purpose Applications: General Purpose E FT-1 Rated Standard Stock Reels General Purpose is nonmetallic flexible raceway for use in General Purpose applications only. It is UL Listed and available with tape pre-installed. Features: For use in General Purpose areas per Articles 725, 770, 800 and 820 of the NEC. Available in sizes 3/4" through 2" Technical Info: UL Listed to 2024 Test Method Maximum Value Maximum Flame Propagation UL ft. Maximum Air Temperature at 12 ft. UL F Storage -4 F to 158 F Handling -4 F to 104 F No UV protection (not suitable for outdoor use) Do not store outside General Purpose raceway is listed to UL 2024 in accordance with the National Electrical Code per Articles 725, 770, 800 and 820 for General Purpose and other cabling optical fiber/telecommunication applications. Pull tape can be factory pre-installed in 1" through 2" Outside Diameters meet IPS Dimensions Footage sequentially marked 1" 1 1 /4" 1 1 /2" 2" I.D. Min. Reel Reel Product Min. Min. Max. Pull Bend Size Reel Reel Wt. Wt. per Color Part No. Ref. O.D. O.D. Tape Radius (F x W) Type Length (lbs.) 100 ft. (lbs.) Orange BF4X1B lb. 6" 82" x 41" W Orange BG4X1B lb. 7" 72" x 41" W Orange BH4X1B lb. 8 1 /4" 82" x 41" W Orange BJ4X1B lb. 9 1 /2" 82" x 41" W W = Wood Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length B = General Purpose F = 1" 4 = Corrugated X = Standard 1 = Orange B = 1130 lb. Tape Example G = 1 1 /4" 2 = Black = Feet H = 1 1 /2" 3 = Gray J = 2" 4 = White 5 = Blue 7 = Yellow 8 = Red Custom Orders are not returnable Custom lengths are available in minimum order quantities of 1000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Gray, Red, White and Yellow Two, three, or four way parallel Split Duct Custom print line 93

8 Flexible Raceway Accessories Nonmetallic Adapters & Couplings For use with Riser-Gard and General Purpose LR31146 Couplings Part. No. Size Color Quantity Weight (lbs.) SCA240E 3/4" Orange SCA240F 1" Orange Threaded Adapters Part. No. Size Color Quantity Weight (lbs.) SCA243E 3/4" Orange SCA243F 1" Orange Snap-In Adapters Part. No. Size Color Quantity Weight (lbs.) SCA253E 3/4" Orange SCA253F 1" Orange Nonmetallic Adapters & Couplings For use with Plenum-Gard Couplings Part. No. Size Color Quantity Weight (lbs.) A340F 1" Orange Couplings Part. No. Size Color Quantity Weight (lbs.) A343F 1" Orange Couplings Part. No. Size Color Quantity Weight (lbs.) A353F 1" Orange

9 Flexible Raceway Accessories Nonmetallic Adapters and Couplings For use with Riser-Gard and General Purpose Male Terminal Adapters For adapting nonmetallic conduits to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on other. Part Ctn. A B Min. Max. C T L Ctn. Wt. No. Size Qty. Color Typical D OD Typical (lbs.) E943E 3/4 125 Gray /32 3/4 9/ /8 3.5 E943F 1 50 Gray /8 1 11/ /32 3 E943G 1 1 /4 50 Gray /32 1 3/ /16 4 E943H 1 1 /2 25 Gray / /16 3/4 2 1 / E943J 2 50 Gray / /16 3/4 2 1 /8 7 SCE943G 1 1 /4 50 Orange /32 1 3/ /16 4 SCE943H 1 1 /2 25 Orange / /16 3/4 2 1 / SCE943J 2 50 Orange / /16 3/4 2 1 /8 7 Metallic Adapters and Couplings Universal Aluminum Couplings For use with Plenum-Gard, Riser-Gard, Hal-Free Riser-Gard, and General Purpose Self-threading, which draws each end of the conduit into the center of the coupler. Duct O.D. Ctn. Part. No. Size Range Ctn. Qty. Wt. (lbs.) P75 3/4" P100 1" P /4" P150CPLR 1 1 /2" P200 2" Standard Couplings All socket fittings should be attached Using Carlon solvent cement. Using Carlon fittings with Carlon nonmetallic conduit insures system integrity. Socket type for joining nonmetallic conduit. E32447 Except where noted by Part Ctn. A B Min. Max. C L Ctn. No. Size Qty. Color Typical D OD Typical Wt. (lbs.) E940E 3/4 100 Gray /16 3/4 1 5 /8 4.4 E940F 1 50 Gray /8 15/ E940G 1 1 /4 30 Gray / /8 3.5 E940H 1 1 /2 25 Gray / /8 2 3 /8 3.9 E940J 2 30 Gray / / / SCE940G 1 1 /4 30 Orange / /8 3.5 SCE940H 1 1 /2 25 Orange / /8 2 3 /8 3.9 SCE940J 2 30 Orange / / / Metallic Terminal Adapter For use with Plenum-Gard Ctn. Ctn. Part. No. Size Qty. Wt. (lbs.) E147E 3/4" 1.7 E147F 1" Terminating Connector For use with Plenum-Gard and Hal-Free Riser-Gard Part No. Size Nom. O.D. Range Ctn. Qty. Ctn. Wt. TC100 1" TC /4" TC /2" TC200 2" Washers Flat Sealing Washer Where a waterproof termination is required into any enclosure (metallic or nonmetallic), install the neoprene washer over the threads of a terminal adapter before inserting into the enclosure. Use a standard locknut or threaded bushing to secure the assembly. Part No. Size Ctn. Qty. Ctn. Wt. (lbs.) E943EW 3 /4" E943FW 1" E943GW 11/4" E943HW 1 1 /2" E943JW 2"

10 Flexible Raceway Accessories Low Voltage Boxes & Brackets Dual Voltage Box/Bracket * Ctn. Part No. Size Volume Ctn. Qty. Wt. (lbs.) SC200DV 1-Gang 20.5 cu. in *U.S. Patent D463,376 SC200DV Low Voltage Add-On Bracket * Ctn. Part No. Size Ctn. Qty. Wt. (lbs.) SC100SC 1-Gang *U.S. Patent D459,312 U.S. Patent 6,710,245 E SC100SC Low Voltage Adjustable Brackets * Part No. Size Ctn. Qty. Ctn. Wt. (lbs.) SC100ADJC 1-Gang SC200ADJC 2-Gang *U.S. Patent 5,289,934 E SC100ADJC Low Voltage Brackets * Ctn. Part No. Size Ctn. Qty. Wt. (lbs.) SC100A 1-Gang SC200A 2-Gang (3/4" Resi-Rings) *U.S. Patent D457,140 D462,664 * D Lamson & Sessions E SC100A SC200A 96

11 Flexible Raceway Accessories NEW Mud Box Assemblies Except where noted by Carlon Mud Box Assemblies are available in five unique styles blank, ceiling ring, one-gang, two-gang and 4 square. All Mud Box Assemblies are manufactured out of polycarbonate material to provide extra strength and durability, are concrete tight, and have twelve integral connectors two-1", six-3/4", and four-1/2". Using our new ENT Reducers, this product will meet ANY jobsite application. Mud Box Base with Blank Cover Part. No. Size Ctn. Qty. Ctn. Wt. lbs. A863BC Mud Box w/ Blank Cover Patent Pending Mud Box with Ceiling Ring Threaded brass inserts for fan (#10-32 screws) and fixture (#8-32 screws) mountings Listed for fixture support up to 50 lbs. Listed for ceiling fans up to 35 lbs. Part. No. Size Ctn. Qty. Ctn. Wt. lbs. A863CF Mud Box w/ Ceiling Ring A863CFG Mud Box w/ Ceiling Ring & Ground Lug Patent Pending Mud Box with One-Gang Ring Part. No. Size Ctn. Qty. Ctn. Wt. lbs. A863S Mud Box w/ One-Gang Ring A863SG Mud Box w/ One-Gang Ring & Ground Lug Patent Pending Mud Box with Two-Gang Ring Part. No. Size Ctn. Qty. Ctn. Wt. lbs. A863D Mud Box w/ Two-Gang Ring A863DG Mud Box w/ Two-Gang Ring & Ground Lug Patent Pending Mud Box with 4 Square Ring 4 Square Ring not for luminaries. Part. No. Size Ctn. Qty. Ctn. Wt. lbs. A863-4SQ Mud Box w/ 4 Inch Square Ring Patent Pending 97

12 Flexible Raceway Accessories 2 1 /2" &4" Mud Boxes with Covers For use with Riser-Gard and General Purpose Base Rings Listed for use with ceiling fans up to 35 lbs. and for fixture support up to 50 lbs. For use with Riser-Gard and General Purpose A861 Without ground lug CA861G With ground lug Covers Quick Connect Outlet and Switch Boxes Suitable for masonry walls Meets NEMA OS-2 Single Gang 16 cu. in. A862D 2 1 /2" Deep ( 1 /2" KO s) A862E 2 1 /2" Deep ( 3 /4" KO s) A864D 4" Deep ( 1 /2" KO s) A864E 4" Deep ( 3 /4" KO s) A864F 4" Deep (1" KO s) A58381D 3 x 2 1 /4 x3 ( 1 /2" KO s) A58381E 3 x 2 1 /4 x3 ( 3 /4" KO s) LR31146 Two Gang 20 cu. in. A52151D 4 x4x1 1 /2 ( 1 /2" KO s) A52151E 4 x 4 x 1 1 /2 ( 3 /4" KO s) A521DE 4 x 4 x 1 1 /2 ( 1 /2" & 3 /4" KO s) Two Gang 30.3 cu. in. A52171D 4 x 4 x 2 3 /8 ( 1 /2" KO s) A52171E 4 x4x2 3 /8 ( 3 /4" KO s) A5217DE 4 x 4 x 2 3 /8 ( 1 /2" & 3 /4" KO s)

13 Flexible Raceway Accessories ENT Box with Adapters For use with Riser-Gard and General Purpose Two Gang cu. in. ENT Box with Adapters A5329DE 4 x4x1 3 /4 ( 1 /2" & 3 /4" KO s) Box Back Wall Support A540DS For use with 1 /2" Knockout ENT Box Extenders For use with Riser-Gard and General Purpose Single Gang Part. No. Rise Cu. in. Quantity Weight (lbs.) A410 1/2" A411 5/8" A412 3/4" A413 1" A /4" Two Gang Part. No. Rise Cu. in. Quantity Weight (lbs.) A400 Blank A420 1/2" A421 5/8" A422 3/4" Round Covers for Octagon Ceiling Boxes For use with Riser-Gard and General Purpose Round Plaster Rings Suitable for fixture support Except where noted by Part. No. Rise Cu. in. Quantity Weight (lbs.) A471 1/2" A472 3/4" Round Blank Covers Part. No. Rise Cu. in. Quantity Weight (lbs.) E460R-CAR Blank A470D Blank with 1 /2" KO

14 Flexible Raceway Accessories Quick Connect 4" Octagon Ceiling Boxes For use with Riser-Gard and General Purpose Carlon ceiling boxes and round plaster rings are produced from a special high heat resistant engineered plastic material developed specifically for fixture support. LIsted for fixture support up to 50 lbs. Ceiling Box 20.5 cu. in. A615D /8" Deep ( 1 /2" KO s) A615E /8" Deep ( 3 /4" KO s) A615DE /8" Deep ( 1 /2" & 3 /4" KO s) Ceiling Box with J Mount 20.5 cu. in. A615DJ /8" Deep ( 1 /2" KO s) Ceiling Box with L Bracket 20.5 cu. in. A615DL /8" Deep ( 1 /2" KO s) Ceiling Box with Adjustable Hanger Bar 20.5 cu. in. Adjust from 14 1 /4" to 23 1 /4" A615DH /8" Deep ( 1 /2" KO s) Except where noted by PVC Conduit Cutters Small Cutter Medium Cutter Large Cutter For fast, smooth field cuts of 1/2" through 1" Riser-Gard and Plenum-Gard. Part No. Size Ctn. Qty. CC120B 8" 10 Hand held cutter makes fast square, smooth field cuts on conduit from 1/2" through 11/4". Produces burr-free cut with no shavings. Fits into pocket or pouch. Part No. Size Ctn. Qty. CC125 9" 12 For clean cuts of conduit 1/2" through 2". Part No. Size Ctn. Qty. CC /2"

15 Flexible Raceway Accessories Prelubricated, woven polyester tape made from low friction, high abrasion resistant yarns providing a low coefficient of friction. Tape Tape is printed with sequential footage markings for accurate measurements. Part. No. Size Tensile Strength Reel Lengths TL /2" 1250 lbs. 5,000 ft. TL /2" 1250 lbs. 10,000 ft. TL /8" 1800 lbs. 3,000 ft. TL /8" 1800 lbs. 6,500 ft. TL /8" 1800 lbs. 10,000 ft. Other ropes and tapes are available. Consult your sales service location for additional information. Carlon Cement (MSDS sheets available at *Meets ASTM D2564 Medium Bodied Clear PVC Solvent Cement with dauber* Part No. Size Ctn. Qty. VC9964 1/2 Pint 10 VC9963 Pint 24 VC9962 Quart 12 VC9961P Gallon 6 Recommended pipe application and sizes Recommended for all grades and types of Carlon PVC conduit, duct, wireway and fittings, except Flex-Plus Blue ENT (Electrical Nonmetallic Tubing.) Up through 6" diameter. Set-up time (Evaporation Rate) F Not recommended F 5-6 minutes F 3-4 minutes F 1-2 minutes Recommended installation temperature 40 to 100 F Lap 73 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi Viscosity at 75 as manufactured cps All-Weather Quick-Set Clear Solvent Cement with dauber* Part No. Size Ctn. Qty. VC9984 1/2 Pint 10 VC9983 Pint 24 VC9982 Quart 12 VC9981P Gallon 6 Recommended for all grades and types of Carlon PVC conduit, duct, wireway and fittings, except Flex- Plus Blue ENT (Electrical Nonmetallic Tubing.) Up through 6" diameter F F F F 4-5 minutes 3-4 minutes 1-2 minutes 1 /2-1 1 /2 minutes -5 to 100 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi cps Low VOC Gray PVC Solvent Cement with dauber* Part No. Size Ctn. Qty. VC9LV4 1/2 Pint 10 VC9LV3 Pint 24 VC9LV2 Quart 12 Recommended for all grades and types of Carlon PVC conduit, duct, wireway and fittings, except Flex- Plus Blue ENT (Electrical Nonmetallic Tubing.) Up through 6" diameter. VOC emission of 490 grams/liter per the Bay and South Coast test method F F F F Not recommended 5-6 minutes 3-4 minutes 1-2 minutes 40 to 100 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi cps 101

16 Innerduct Guide Carlon Innerduct Guide W HERE IS I NNERDUCT BEING USED? I NSIDE THE B UILDING Plenum Must be UL Listed Plenum cable must be installed Color: Industry standard=orange Pull tape pre-installed in sizes 1/2" through 2" Plenum-Gard product numbers: 1/2" CD4X1C 3/4" CE4X1C 1" CF4X1C 11/4" CG4X1C 11/2" CH4X1C 2" CJ4X1C General Purpose & Riser Must be UL Listed Riser rated cable must be used in riser applications Color: Industry standard=orange Riser-Gard product numbers: 3/4" DE4X1C 1" DF4X1C 11/4" DG4X1C 11/4" DH4X1C 2" DJ4X1C General Purpose product numbers: 1" BF4X1B 11/4" BG4X1B 11/4" BH4X1B 2" BJ4X1B Note: HDPE innerduct will not meet code O UTSIDE THE B UILDING Pulled into a Conduit HDPE True sized duct recommended 1.00" ID or 1.25" ID Corrugated (Riser-Gard and HDPE) duct for newer conduit runs & shorter distance pulls HDPE Solidwall for older conduit runs & longer distance pulls Options Plowed or Trenched HDPE SDR sized duct recommended (11/4" or larger) HDPE SDR 13 wall thickness for nonrocky soil conditions HDPE SDR 11 wall thickness for rocky conditions Riser-Gard approved for direct bury applications but NOT exposed applications NOTE: Aerial HDPE for exposed applications Color Striping Factory installed pull lines Segmented or paralleled reels Pre-lubricated duct Specifying and installing UL Listed innerducts with the anticipation of future upgrades provides the building owner with a low cost solution for the removal of abandoned cables