FAN & FIXTURE BOXES F O R A V A R I E T Y O F U S E S

Transcription

1 U L/C SA LI STE D FAN & FIXTURE BOXES F O R A V A R I E T Y O F U S E S

2 Choose the Fan or Fixture Box that s right for you... No matter what your needs or preferences, has a fan/fixture box to fit. We manufacture a variety of steel and non-metallic boxes in many depths and cubic inch capacities that install directly to the joist(s) for an extrasecure s Center screw into joist. Our boxes that mount to the bottom of a joist deliver s s a safe, secure Fan/Fixture bracket install into joist because both the box and the bracket install directly to the joist! Plus, we have a box for every ceiling condition! Mount Under- Mount 5 Side Mount 5 FBS05, FBS05T 6.0 cubic inches FBS07, FBS07T 8.0 cubic inches for NEW FBS5 -/" depth.6 cubic inches FBS0 " depth 0.0 cubic inches For NEW FBS5S -/" depth.6 cubic inches FBS0S " depth 0.0 cubic inches FBS.0 cubic inches For NEW For NEW and Existing FB cubic inches FB cubic inches Plastic FB. cubic inches FB5 0. cubic inches FB 9.5 cubic inches FB6 6.0 cubic inches FB. cubic inches FB 7.96 cubic inches FB 5.6 cubic inches...in Steel or Plastic or a Combination! Mount 0 Press Hold Mount Side Mount Each of our boxes is UL Listed to hold fans and fixtures of a specific weight; generally from 5 to 00 lbs., depending on the box. In addition, our nonmetallic boxes offer a -hour fire rating. For ceilings up to -/" thck. Applications include: n /" or 5/8" drywall n Double drywall n Drywall mounted to hat channel, or furring strips, then to the joist n Single or double joists Mounts Between s Adjustable Brackets 6-7 s FBRS5 5.6 cubic inches FBRS07R 8.0 cubic inches FBRS0R " depth 0.0 cubic inches For NEW For RETROFIT Steel& Plastic FB7S 0.0 cubic inches Low profile FB7SLP 0.0 cubic inches Side Mount Plastic Box with Steel Bracket Most of s fan boxes ship with an installed NM cable connector, mud cover in place and captive for both the box and the fan/fixture mounting bracket. For Any Suspended Ceiling Frame 8 FBRS0SC, FS0SCL " depth 0.0 cubic inches Steel MB8 6. cubic inches 8'' Mounting Block See chart on 5 Uses UL/CSA Load Ratings Number of Single Conductors s fan/fixture boxes are patented (or other patents pending).

3 Steel Boxes Mount Steel Boxes Mount FBS05 for /" and 5/8" drywall FBS07 for 5/8" drywall Designed for /" or 5/8" drywall ceilings, our costeffective, plated steel FBS05 and FBS07 pan boxes mount directly to a ceiling joist for a super-secure. n For NEW n UL Rated for 70 lb. fans; 00 lb. fixtures n CSA Rated for 50 lb. fan or fixture Item # UPC/DCI/NAED Cubic Ceiling Unit/Std MFG #0 899 Inches Thickness Pkg FBS /", 5/8" 5 FBS /8" 5 * FBS05T /", 5/8" 5 * FBS07T /8" 5 Protective plastic tips Installed mud cover Captive remain in place until used Installed NM cable connector Green ground screw * with threaded openings and #0 (supplied) for mounting fan/fixture bracket. FBS05T inside view Mount Under NO LOOSE PARTS! Box and bracket ship captive, and stay in place until you re ready to use them. Side Mount Installed NM cable connector Captive bracket Box (use to install box UNDER joist) FBS5/ FBS0 Mount under joist Install FBS5/FBS0 box under the joist using the captive from the break-off tab. Item # UPC/DCI/NAED Cubic Under Unit/Std MFG #0 899 Inches Box Depth Pkg FBS /" 5 FBS " 5 NO LOOSE PARTS! Box and bracket ship captive, and stay in place until you re ready to use them. Bracket FBS5 -/" deep steel box FBS0 " deep steel box s octagonal steel boxes mount directly to a joist for a strong, safe fan or fixture. Available in two depths (-/" and "), and two styles. Combination hex/phillips head provide easy with power screwdrivers. FBS5 and FBS0 mount securely UNDER the joist. n UL Rated for fans/fixtures up to 70 lbs. n CSA Rated for 50 lb. fan or fixture FBS5S -/" deep steel box FBS0S " deep steel box FBS5S and FBS0S mount on the SIDE of the joist. FBS05 Remove these and use to mount bracket Use these to install box ON SIDE of joist Item # UPC/DCI/NAED Cubic Side Mount Unit/Std MFG #0 899 Inches Box Depth Pkg FBS5S /" 5 FBS0S " 5 Below installer removes captive in preparation for installing box to side of joist. Secure! Box mounts Convenient. Drill () /8" dia. Easy. Mount bracket into the holes directly to joist with captive screw holes into joist through elongated with the () long removed near center. openings on each side of box. Remove the () noted above. Use to mount the bracket... previously. Mount fan/fixture per manufacturer s instructions. Most of s Fan/Fixture boxes ship with an installed NM cable connector and mud cover As well as captive for the box and bracket. n UL Rated for fans/fixtures up to 70 lbs. n CSA Rated for 50 lb. fan or fixture No parts to lose or misplace... they ship ready to use! Install FBS5S/FBS0S box on OPTION: Remove break-off tab Remove the bracket the side of the joist using the () with pliers. noted above. Use them to captive removed from the mount fan/fixture bracket to the break-off tab. box. See chart on 5 Uses UL/CSA Load Ratings Number of Single Conductors 5

4 Plated Steel Boxes with fully adjustable mounting brackets Plated Steel Boxes with fully adjustable mounting brackets FBRS5 for New Construction s super heavy-duty, For New Construction For Existing Construction Sled FBRS0R FBRS0R for Existing Construction plated steel fan/fixture boxes, with fully adjustable mounting brackets, are the innovative alternative to existing bar hanger brackets. Their heavy-duty construction eliminates fan wobble. Plus, FBRS5 for new FBRS5 Bracket feet As the hex bar is tightened, bracket ends bite into the joists, holding the unit secure. Remove, and use these captive to install fan/fixture bracket. n Mounts between joists or rafters 6" to " o.c n 0.0 cubic inch n UL Rated: 5 lb. fans, 50 lb. fixtures construction and FBRS0R, FBRS07R for retrofit, ship ready to use, with all mounting hardware secured in the assembly. There are no bagged parts or pieces to Item # UPC/DCI/NAED Cubic Use and Unit/Std MFG #0 899 Inches Box Depth Pkg FBRS New Construction /0 Ceilings up to -/" Adjust box position between joists with this screw. Locator tab is pre-set to position box properly on /" ceiling thickness. lose. n For ceilings up to -/" thick n Mounts easily, securely between joists 6" to " on-center (o.c.) n Versatile 6" to " o.c. positioning between joists n 5.6 cubic inch n UL Rated: Fans/fixtures: up to 70 lbs. at " o.c. up to 0 lbs. at 6" o.c. n Competitively priced! Tooth holds bracket temporarily in place. Remove from both ends of bracket. Use them to attach bracket to joists. Adjust box position from 6" to " o.c. between Install fan mounting bracket. joists. Note: Drywall not shown Cut hole in ceiling. Remove box Tighten the hex bar with a wrench Reattach box, and center it in hole. from sled and fit mounting bracket to secure bracket between joists. Attach bracket with into hole. Position bracket supplied. Install fan/fixture per between joists, with bracket feet manufacturer s instructions. resting on the ceiling. For Wood I-Beams in Existing Construction Drywall cut away to show between I-beams Unique slide-style bracket s FBRS07R fan/fixture box is perfect for s on wood I-beams or rafters. For a secure, UL-Rated there s nothing better. Unlike other hard-to-assemble brackets, s unique slidestyle bracket offers fast and easy. And you can position the box anywhere along the bracket for a centered. FBRS07R for Wood I-Beams in Existing Construction n Box installs flush with ceiling drywall n For /" and 5/8" thick ceilings n No parts to lose ships with captive box adjustment, fan bracket and an installed NM cable connector n 8.0 cubic inch box FBRS07R Item # UPC/DCI/NAED Cubic Use and Unit/Std MFG #0 899 Inches Box Depth Pkg n For existing construction on wood I-beams or rafters set 6 to inches on-center n Listed to new UL standards CONVENIENT. Tab positions box flush on /" ceiling. Fits ceilings up to -/" thick. Bracket is scored for ease of. FLEXIBLE. For flush ceiling s on ceilings over /" thick, bend the bracket along the scoreline that matches the ceiling depth. A GREAT FINISH. FBRS5 flush ceiling. FBRS0R Retrofit /0 " Box FBRS07R Retrofit on /0 Wood I-beams n UL rating 5 lb. fan 50 lb. fixture 6 See chart on 5 Uses UL/CSA Load Ratings Number of Single Conductors 7

5 Fan/Fixture Box Kit for Suspended Ceilings Fixture Box for Suspended Ceilings Designed just for mounting a fan or fixture on a suspended ceiling grid, s FBRS0SC fan/fixture box kit saves money! And 0 minutes of time. The box/bracket assembly ships with the box mounted securely on-center, ready to install on a " grid. For a centered, there s no need to adjust the box or bracket, but you can position the box where you want it. There are no parts to lose! Heavy-duty Plated Steel UL Listed for fixtures Costs less than the 70 lb. rated FBRS0SC. FS0SCL Screws hold ends securely to ceiling grid Meets NEW 008 NEC, section.7 for Outlet Boxes...box must support kg (50 lb) luminaire 0.0 cubic inch capacity Note: FS0SCL ships fully assembled and ready to install in the center of a " suspended ceiling tile. To mount box off-center, loosen. Slide box into position. t s new all-metal box, just for fixtures, is a one-piece assembly that ships ready to install on a " suspended ceiling grid No assembly required. It s tested and rated to support exit lights, security cameras and other light fixtures No more guesswork. Installers who previously attached a metal box to a bracket in the field, then added a chain or wire for FBRS0SC ships fully support, now have an assembled. Installation and " deep box assembly that is fully tested adjustment ship to hold up to 50 lbs! parked in place. There s an installed NM cable connector too. (photo taken from above ceiling) (photo taken from above ceiling) If the box is not perfectly positioned, loosen the appropriate, slide the n Fully adjustable mounting bracket n " deep, 0.0 cubic inch box n Meets new UL standards n UL Rating: 70 lb fan or fixture CSA: Acceptable for fan support n Usable for Environmental Air Handling spaces Note: CHAIN MUST BE CENTERED OVER BOX. Cut a -/6" diameter hole in a Place box over hole. Place ends of Use the S hooks provided to attach " ceiling tile. support bar over the ceiling grid chain to turnbuckle, and chain to the (tees). overhead support. Use turnbuckle to apply tension to the chain, so it supports the weight of fan. Note: DROP WIRE MUST BE CENTERED OVER BOX. Cut a -/6" diameter hole in a Place box over hole. Snap ends of support bar over the " ceiling tile. ceiling grid (tees). box along the bracket and retighten the. n Easy, secure mounting to ceiling grid n Costs less than fieldassembled components (box, bracket, wire) n Saves time n Usable for Environmental Air Handling spaces FBRS0SC Adjustable mounting bracket Note: To mount box off-center, loosen. Slide box into position. t 0.0 cubic inch capacity Cable pulled through cable 5 Use FS0SCL to install fixtures, security cameras, etc. connector (not supplied). Not fan rated. Remove captive (shown above). Use them to install the fan or fixture per manufacturer s specifications, NEC and all local electrical codes. Captive and adjustment Kit includes box/bracket assembly with turnbuckle, ' heavy-duty chain, and () S hooks. Item # UPC/DCI/NAED Box Description Unit/Std MFG #0 899 Pkg FBRS0SC 7500 " deep Fan/Fixture box kit /5 0.0 cu. in. for suspended ceilings Item # UPC/DCI/NAED Box Description Unit/Std MFG #0 899 Pkg FS0SCL 56 " deep Box for suspended /0 0.0 cu. in. ceilings, for fixtures One-piece, rated unit includes box, bracket and drop wire For FBRS0SC and FS0SCL OPTION: If required by local code, use sheet metal (not supplied) to hold bracket ends on ceiling grid. 8 See chart on 5 Uses UL/CSA Load Ratings Number of Single Conductors 9

6 Plastic Boxes Plastic Boxes - Press Hold Mount FB05 for /" and 5/8" drywall FB07 for 5/8" drywall FB for /" or 5/8" drywall with hat channel or furring strips, or double drywall FB05, FB07, and FB offer the flexible, economical solution to /" and 5/8" drywall ceiling, with or without hat channel or furring strips. FB05 and FB07 are perfect for double To install box securely on joist, tighten captive center screw. FB05 FB07 Screw Tunnels help to center the box on joist. FB FB5 FB6 FB Shipped-in-place center screw NM cable connector ships installed in KO # KO # Underside Four gripping tangs press hold box to joist FB5 for /" and 5/8" drywall FB6 for /" and 5/8" drywall FB for /" or 5/8" drywall with hat channel or furring strips with a single layer of drywall, or double drywall FB5 and FB6 come with the you need to install the box and bracket, held captive until you re ready to use them. Press Hold...Speed, Convenience, Safety joists or wood I-beams. n Fast, easy n Secure attachment to joist or rafter n No parts to lose n -hour fire rating n UL Rated: 70 lb. fans, fixtures up to 00 lbs. Box Installation FB6F NEW! Flanged design forms a protective barrier against air infiltration. Item # UPC/DCI/NAED Cubic Drywall Unit/Std MFG #0 899 Inches Thickness Pkg FB /" or 5/8" 5 FB /" or 5/8" 5 FB6F /" or 5/8" 5 FB /" or 5/8" * 5 * w/ furring strips or hat channel with a single layer of drywall or with a double layer of drywall FB5 These boxes have gripping tangs that press-hold the box to the joist while you reach for your screwdriver. Tightening the center screw affixes the box onto the joist for a supersecure. n -hour fire rating n UL Rated: 70 lb. fans, fixtures up to 00 lbs. FB FB Convenient. Gripping tangs hold Push NM sheathed cable through Remove () long parked. box in place temporarily, until the connector. Use them to install bracket. center screw is tightened. The FB fan/fixture box is perfect for /" or 5/8"...or double drywall (shown as cutaway). drywall with /" furring strips or hat channel with a single layer of drywall... All of s Fan/Fixture boxes ship with an installed NM cable connector and mud cover as well as captive for the Item # UPC/DCI/NAED Cubic Drywall Unit/Std MFG #0 899 Inches Thickness Pkg FB /" or 5/8" 5 FB /8" 5 FB /" or 5/8" * 5 * w/ furring strips or hat channel with a single layer of drywall or with a double layer of drywall The fan/fixture bracket installs 5 Cable pulled through installed NM directly onto the joist through the cable connector. oval slots in the box. box and bracket. No parts to lose or misplace...ready to use! Save time and money with our deeper, press-on fan/fixture boxes! 0 See chart on 5 Uses UL/CSA Load Ratings Number of Single Conductors

7 Plastic Boxes Plastic Boxes with Steel Bracket FB Our largest capacity L-shaped box FB FB Lowest cost L-shaped boxes FB is the largest capacity box we make! Its 5.6 cubic inch capacity provides plenty of room for wires easy access too! The slightly smaller FB and FB offer the same great features and benefits at a lower cost. n Boxes mount to single or double joists or rafters with a shipped-in-place center screw n Locator posts assure correct positioning of bracket n UL Rated: 70 lb. fans, fixtures up to 00 lbs. n -hour fire rating Locator Post FB Item # UPC/DCI/NAED Cubic Drywall Unit/Std MFG #0 899 Inches Thickness Pkg FB 79. /" or 5/8" 5 FB /" or 5/8" 5 FB /" or 5/8" 5 Locator Post for bracket Secure! Side mount the box to the Pull wires. (Drywall Done! Install fan or fixture per joist using the shipped-in-place omitted) After ceiling is installed, manufacturer s instructions. center screw. remove captive use them to install bracket. Fast and easy on single or Accurate! Locator posts on these L-shaped boxes double joists! assure proper positioning of the bracket. FB FB Installation FB Installation Nail On Attachment to Single or Double s Single FB7S Fast. Simply nail the box to the joist. Indicator lines on FB7S assure proper positioning on the joist for the ceiling thickness. Item # UPC/DCI/NAED Cubic Ceiling Unit/Std MFG #0 899 Inches Thickness Pkg FB7S up to -/" 5 FB7SLP * /" or 5/8" 5 * Also works on manufactured I-beams FB7S Double FB7SLP FB7S FB7S and FB7SLP side mount to single or double joists for a super-secure. Most of s Fan/Fixture boxes ship with an installed NM cable connector and mud cover As well as captive for the box and bracket. No parts to lose or misplace... ready to use! FB7S for ceilings up to -/" thick, including single-sheeted drywall mounted to furring strips or hat channel or double drywall FB7SLP Low profile for /" or 5/8" ceilings FB7S saves time! Nail on, and indicator marks for /", 5/8", and /" ceiling thicknesses make it the logical choice for speedy attachment to single or double joists. For added convenience, use the low profile FB7SLP for /" or 5/8" ceilings. Also works for manufactured I-beams. Both ship ready to use, with the nail in place and captive bracket. n No loose parts totally self-contained n Combination hex/phillips head for easy with power screwdrivers n Nail on n 0.0 cubic inch n -hour fire rating n UL Rated: Fans/ fixtures up to 70 lbs. Easy. Bracket on FB. Easy access. FB OPTION: To restuff wires, open (Drywall not shown) bottom of the box before drywall. See chart on 5 Uses UL/CSA Load Ratings Number of Single Conductors

8 8'' Mounting Block with built-in box for fan and fixture s Fan/Fixture Boxes MB8 6. Cubic inches n Ceiling medallion and electrical box combined n Supports flood lights, smoke detectors, fans, light fixtures any fixture needing a safe, strong. n UV rated plastic n For interior or exterior use n Mounts directly to soffit or ceiling joist without the need to cut ceiling drywall n Paintable n UL Rated: 70 lb. fan, 00 lb. fixture; CSA rated: 50 lb. fan/fixture Canadian orders ship with grounding lug required by CSA for use with fixtures. FBS.0 Cubic inches Designed for new construction or retrofit, this deep steel box side mounts to a joist for a super secure, fan-rated. n UL Rated for fans/fixtures up to 70 lbs. Locate the ceiling joist using a stud Using the #8 x -/" wood Install the fixture or fan mounting finder or similar device. Drill a hole provided, mount the MB8 to the bar (provided with the fixture or approximately /" in diameter, in the ceiling next to the joist. Remove desired knockout. Insert the cable connector into the opening. Pull the NM cable through the connector. joist (through the ceiling). fan) directly to the joist with the () #0 x " wood and lock washers provided. Wire the fixture or fan following the instructions included with the product. Steel Box Side Mounts to NEW! Tapped #8- (for fixtures) Tapped #0- for fans ( included) Installed NM cable connector /" KO on side MB8 includes... Two #0 x " wood, one #8 x -/" wood screw, two KOs, and one NM9 non-metallic cable connector. Item # UPC/DCI/NAED Cubic Use and Unit/Std MFG #0 899 Inches Box Depth Pkg MB Flat Mount /0 Three ship captive and attach box securely to the joist. Tapped #8- (for fixtures) MB8 Installation Tapped #0- for fans ( included) FBS Patent Pending Fan/Fixture Box Rating and # of Single Conductors UL CSA UL Fixture CSA Fixture Catalog Category Cubic Fan Load Fan Load Static Static # Of Single Conductors Number Inches Rating Rating Rating Rating # or # or #0 (Lbs.) (Lbs.) (Lbs.) (Lbs.) FB05 PLASTIC FB050 PLASTIC FB07 PLASTIC FB070 PLASTIC FB PLASTIC FB5 PLASTIC FB50 PLASTIC FB7S PLASTIC & STEEL FB7SLP PLASTIC & STEEL FB PLASTIC FB6 PLASTIC FB6F PLASTIC FB PLASTIC FB PLASTIC FB PLASTIC FB50 PLASTIC FB900 PLASTIC FBRS07R STEEL FBRS5 STEEL 5.6 " o.c. 50 " o.c " o.c. 6" o.c. FBRS0R STEEL FBRS0SC STEEL FBS STEEL FBS05 STEEL FBS05T STEEL FBS07 STEEL FBS07T STEEL FBS5 STEEL FBS5S STEEL FBS0 STEEL FBS0S STEEL FBX900 PLASTIC & STEEL FS0SCL STEEL MB8 PLASTIC Place box at proper depth; attach to joist with three captive in the box. Item # UPC/DCI/NAED Cubic Side Mount Unit/Std MFG #0 899 Inches Box Depth Pkg FBS " 0 Most of of s Fan/Fixture boxes ship with an installed NM cable connector and mud cover As well as captive for the box and bracket. No parts to lose or misplace...ready to use! 5

9 SAVE MONEY! FAN/FIXTURE BOX just for SUSPENDED CEILINGS pg 8 with the box and bracket assembly mounted on center, ready to install on a " suspended ceiling grid. Save 0 minutes of assembly time with FBRS5 s new fan/fixture box. It ships pg 6 No parts to lose FLUSH WITH CEILING FAN/FIXTURE BOX with ADJUSTABLE BRACKET s heavy-duty, plated steel fan/fixture box has an adjustable bracket that fits 6" to " o.c. Flush ceiling s! FBRS5 is designed for ceilings up to -/" thick. For /" ceilings, use the pre-bent positioning tab. Installation and adjustment ship captive " deep, 0.0 cu. inch box FBRS5 FBRS0SC NEW! UL rating Fan/Fixture 70 lb at " o.c. 0 lb at 6" o.c. For other ceiling thicknesses, bend along the appropriate score line. 5.6 cu. inch box Ships with captive, mud cover, installed NM cable connector (from above ceiling grid) UL rating 70 lb fan or fixture Attach to joists Adjust box position FIXTURE BOX for SUSPENDED CEILINGS pg 9 TESTED WEIGHT RATING LISTED AS -PIECE UNIT s new all-metal, one-piece fixture box ships ready to install on a " suspended ceiling grid. There s no assembly required! FS0SCL Stauffer Industrial Park Scranton, PA /.77 Fax 570/ Industries, Inc. Mounts fixtures securely to the ceiling grid It s tested and rated to support exit lights, security cameras and other light fixtures No more guesswork. Installers who attached a metal box to a bracket in the field, then added a chain or wire for support, now have an assembly that s fully tested to hold up to 50 lbs! FS0SCL is UL/CSA Listed as a complete unit: box, bracket, drop wire. Box can be positioned anywhere along bracket Costs less than field-assembled components (box, bracket, wire) Usable for Environmental Air Handling spaces Distributed by 6 s fan/fixture boxes are patented (or other patents pending).