Catalog # SQ-PAN2. Square Pancake II Air Cylinders
|
|
- Shavonne McLaughlin
- 7 years ago
- Views:
Transcription
1 atalog # SQ-PAN2 Prices effective September 1, 2011 Square Pancake II Air ylinders
2 Square Pancake II ylinders Product Index Standard Series SS, SSR, SSX, SW, ST ow it works ow to Order imensions Options , 9 Weights Nonrotating, Twin Rod Series SN ow it works ow to Order imensions , 13 Options , 13 Weights Magnetic Position Sensing Sensors Quick disconnect cordsets uralon is a registered trademark of Rexnord orp. Magnalube -G is a registered trademark of arleton Stuart orp. Multi-Power and Pancake are registered trademarks of Fabco-Air, Inc. acron, Tefl on and Viton are registered trademarks of upont orp. Accessories All series Specifi cations and prices subject to change without notice or incurring obligation
3 ontinuing the Space Saving Tradition... The Square Pancake II irect Interchange Air ylinders Aluminum alloy heads (clear anodized) Internally lubricated Buna N O'Ring or optional U-up seals Fiber gasket tube seals A better Piston Rod Bearing aptive in cylinder head Nonmetallic uralon Self lubricating igher load bearing capacity ower coeffi cient of friction No slip-stick Thick cover prevents impact damage ard chrome plated stainless steel piston rod Stainless steel tie bolts igh strength threaded fastener and adhesive mates piston to rod Magnalube G lubrication End face tapped mounting holes Superior Interchangeable Industrial Air ylinders Bottom tapped mounting holes A superior ylinder Wall igh strength composite ighly impact resistant Self lubricating Extremely smooth interior ow coeffi cient of friction Minimal heat build up Innovation For over 40 years our famous Pancakes have dominated as the world's fi rst compact air cylinder line. Today, backed by decades of engineering and manufacturing innovation, our new Pancake II composite body air cylinders continue in the Pancake tradition with a wide selection of models and options. Packed with value Stainless steel tie bolts lock precision machined heads tightly around a unique, high strength, composite cylinder barrel. The barrel's extremely smooth, selflubricating interior surface insures highly reliable performance and extended seal life. Its high impact resistance reduces chances of cylinder failure due to dings or dents. Zero slip-stick avoids problems that metal cylinders encounter when they sit in a static condition for extended periods of time. ombined with hard chrome plated stainless steel piston rods and a unique, nonmetallic rod bearing, the new Fabco-Air cylinder assembly assures optimal operation and longer product life. Exceptional Piston Rod Bearing The better the bearing, the more cycle life you can expect from your air cylinders. Pancake II cylinders incorporate a truly superior rod bearing material - uralon with the same fi eld-proven performance you have come to expect from the six other Fabco-Air cylinder families. uralon Rod Bearings Excel oad apacity (psi) Friction Properties Machine esign 1972/73 Bearing Reference Issue Slip- oefficient stick Porous Bronze... 4,500 Steel-on-steel Yes Porous iron... 8,000 Bronze-on-steel Yes Phenolics... 6,000 Nylon... 1,000 Sintered Bronze-on-steel with mineral oil No TFE Bronze-on-steel Reinforced Telfon... 2,500 with mineral oil No *TFE fabric... 60,000 opper lead alloy-on-steel 22 Yes Polycarbonate... 1,000 Acetal-on-steel No Acetal... 1,000 Nylon-on-steel Yes arbon-graphite uralon-on-steel No * Shows uralon bearing classification. Not to be used for design purposes. Printed with permission by Rexnord orp. uralon is a composite of a Teflon /acron fabric liner bonded to a supporting filament-wound, high strength, fiberglass and epoxy resin shell. Resistant to corrosion, moisture and temperature to 325 F, the bearing is reliable in any environment. It has an extremely high load bearing capacity, very low friction, and will not gall or score the piston rod (see physical properties in the table above) Specifi cations and prices subject to change without notice or incurring obligation 3
4 Square Pancake II ylinders Available in 5 styles 7 sizes 3/4" thru 4" Strokes to 4" standard ouble acting, single rod ouble acting, double rod ouble acting, hole thru double rod Single acting, spring retracted rod Single acting, spring extended rod Ratings Standard Units all Series Body... Self-lubricating composite eads... lear anodized aluminum alloy Tie Bolts... Stainless steel Rod... hrome plated stainless steel Piston... Aluminum alloy Rod end...female thread with wrench fl ats Ports...Position #1 Seals... Internally lubricated Buna-N ubrication... Magnalube -G Rod bushing...ptfe composite bearing Stroke tolerance ± 1/64" Media Air Pressure rating, maximum psi Minimum recommended operating pressure psi Temperature rating ylinder to +221 F ( 32 to +105 ) Temperature rating Electronic sensors to +176 F ( 20 to +80 ) Approximate Spring Forces Maximum Force (lbs) to 1" Stroke Spring Rate (lbs/inch) for Stroke Range 1 to 2" Stroke to 3" Stroke to 4" Stroke ylinder Sizing Guide iameter (inch) 3/4 1-1/16 1-1/ /2 3 4 Rod iameter (inch) 0.31 Rod Area (in 2 ) Push Area (Single Rod) (in 2 ) Push Area (ouble Rod) (in 2 ) Pull Area (in 2 ) Specifi cations and prices subject to change without notice or incurring obligation
5 Standard Series SS, SSR, SSX, SW, ST ow to Order Series S - Square Pancake II Model S - single rod W - double rod T - double rod, hole thru Action - double acting R - single acting, spring retract (Model S only) X - single acting, spring extend (Model S only) 2-3/4" 3-1-1/16" 4-1-1/2" 5-2" 6-2-1/2" 7-3" 8-4" Stroke /8" 0-1/4" /8" 0-1/2" etc., thru " (see pages 6 & 7 for standard strokes) Note: Special strokes are available on request. ontact Engineering or your local Fabco-Air istributor. Model Number Series Model Action Mounting Stroke Options Mounting Tapped mounting holes are standard in the basic model and need not be specifi ed. For other mounting specify only one option code. eave Blank - Basic Model PM - Pivot mount, pin 90 from port SM - Pivot mount, pin in-line with port ow to Order 1. Specify S, Model, Action, and 2. Specify optional Mounting (if required) then Stroke 3. Specify the Options in alphabetical order Ordering example #1: SS4-PM2.500-BFV Square Pancake II single rod, double acting, 1-1/2" bore, pivot mount (pin 90 from port), 2-1/2" stroke, front bumpers, and Viton seals. Ordering example #2: SS3-0 Square Pancake II single rod, double acting, 1-1/16" bore, standard tapped mounting holes, and 1" stroke. Options Enter in alphabetical order B - Bumpers, both ends 1 BF - Bumper, front only 1 BR - Bumper, rear only 1 E - Magnet on piston for position sensing (see sensors page 15; length adders page 8) 3/8" stroke minimum 2 J - Failsafe operation (single acting, spring retract models) - ow friction seals (see length adders page 8) M, M1, M4 - Magnet on piston and adhesive mounted dovetail extrusion to hold 1/4" dovetail sensors. (see sensors page 15; length adders page 8) 3/8" stroke min. 2 Q - ow temperature operation ( 40 F to +200 F) TF - oarse female rod thread, dimension E (page 7) TM - Male rod end with coarse thread (page 8) TFM - Male rod end with fi ne thread (page 8) TN - Non-threaded rod T1, T4 - Additional adhesive mounted dovetail extrusions located in position 1 or 4 V - Viton seals for media compatibility ( 15 F to +225 F) W - Rod wiper, Buna N only (page 8) X - EXTRA Rod extension Example: X0.5 = 1/2" EXTRA Rod Extension X1 = 1" EXTRA Rod Extension 1 Stroke is reduced by.03 per end;.06 for option B; Spring retracted, BR only; Spring extended, BF only. 2 Not available with Viton seals or low temperature seals Specifi cations and prices subject to change without notice or incurring obligation 5
6 Square Pancake II ylinders Model SS ouble Acting, Single Rod Sizes 3/4", 1-1/16", 1-1/2", 2" Y 0.13 F Rod ia. 2 Places Each End 2 B1* + Stroke 2 E 4 Places A Square Sizes 2-1/2", 3", 4" Y 0.13 F Rod ia. E 4 Places Each End 2 B1* + Stroke 2 4 Places A Square *Note: Some options effect cylinder length. Standard Strokes All Models: 1/8 1/4 3/8 1/2 5/8 3/4 7/ /4 1-1/2 1-3/ / /2 4 Special strokes available on request. ontact Engineering or your local Fabco-Air istributor Model SW ouble Acting, ouble Rod Model ST ouble Acting, ole Thru ouble Rod Sizes 3/4", 1-1/16", 1-1/2", 2" Y Stroke 2 Places Each End 2 B1* + Stroke 0.13 F Rod ia. E 2 4 Places A Square ole Thru iameter (ST) Female Rod Thread Male Rod Thread Sizes 2-1/2", 3", 4" 4 Places Each End Y Stroke 2 B1* + Stroke 0.13 F Rod ia. 2 4 Places *Note: Some options effect cylinder length. E A Square imensions (inches) A B1* B2* for Stroke Range B3* for Stroke Range NA NA NA NA #6-32 UN #8-32 UN #10-24 UN 1/4-20 UN 5/16-18 UN 5/16-18 UN 7/16-14 UN 6 Specifi cations and prices subject to change without notice or incurring obligation
7 Model SSR Single Acting, Spring Retract Standard Series SS, SSR, SSX, SW, ST Basic imensions *Note: Some options effect cylinder length. See table on page 4 for spring forces. Sizes 3/4", 1-1/16", 1-1/2", 2" Sizes 2-1/2", 3", 4" B2* + Stroke F Rod ia. Standard Strokes All Models*: 1/8 1/4 3/8 1/2 5/8 3/4 7/ /4 1-1/2 1-3/ / /2 4 (*Note For SSX Models: 3" stroke max on 2" to 4" bores) Special strokes available on request. ontact Engineering or your local Fabco-Air istributor 2 Places Each End Y 4 Places Each End Y 2 2 B2* + Stroke F Rod ia. E 4 Places 2 4 Places E A Square A Square Model SSX Single Acting, Spring Extend Sizes 3/4", 1-1/16", 1-1/2", 2" *Note: Some options effect cylinder length. See table on page 4 for spring forces. Sizes 2-1/2", 3", 4" Y 2 Places Each End 4 Places Each End 2 B3* + Stroke B3* + Stroke Approximate ylinder Weights (ounces) SS, SSR, SW, ST, SSX SS, SSR SW, ST SSX Base Adder per 1/8 of Stroke Base Adder per 1/8 of Stroke Model SW Adder per 1/8 of Stroke for Model ST Base Adder per 1/8 of Stroke Y Stroke Stroke F Rod ia. E 2 4 Places 2 4 Places F Rod ia. E A Square A Square imensions (inches) E Standard #10-32 UNF 5/16-24 UNF 3/8-24 UNF 1/2-20 UNF 1/2-20 UNF 5/8-18 UNF 3/4-16 UNF E oarse #10-24 UN 5/16-18 UN 3/8-16 UN 1/2-13 UN 1/2-13 UN 5/8-11 UN 3/4-10 UN E epth for stroke range 1/8-1/2 5/ F # /8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT Y Specifi cations and prices subject to change without notice or incurring obligation 7
8 Model Options Square Pancake II ylinders Male Rod Ends (Option TM or TFM) T E Thread Thread Sizes E Thread TM (oarse) #10-24 UN 5/16-18 UN 3/8-16 UN 1/2-13 UN 1/2-13 UN 5/8-11 UN 3/4-10 UN TFM (Fine) #10-32 UNF 5/16-24 UNF 3/8-24 UNF 1/2-20 UNF 1/2-20 UNF 5/8-18 UNF 3/4-16 UNF T Rod Wiper (Option W) Buna-N only B Boss ia. B eviations from Standard imensions (Options, E, M) A minimum stroke of 3/8 is required to sense end-of-stroke positions. ength Adder (inches) ow Friction Seals Magnetic Position Sensing with and without ow Friction Seals E, M, E or M 8 Specifi cations and prices subject to change without notice or incurring obligation
9 Series SS, SSR, SSX, SW, ST Option imensions Mounting Options PM Pivot Mount - Pin 90 from Port omplete with bronze pivot bushing. Also available as an accessory. See page 14. PA iameter for Pivot Pin PF P PT PB PS P PE SM Pivot Mount - Pin in line with Port omplete with bronze pivot bushing. Also available as an accessory. See page 14. PA iameter for Pivot Pin PR Radius P PT PF PB P PE PS PA imensions (inches) PB P 0.31 P PE PF PR PS PT Specifi cations and prices subject to change without notice or incurring obligation 9
10 Square Pancake II ylinders Nonrotating, double acting 4 sizes 3/4" thru 2" Strokes to 4" standard Twin piston rods are incorporated into the cylinder head to achieve NON-ROTATION. The rods are securely fastened to the piston and tied together externally by a rod end tool bar. The tool bar insures that the rods move in tandem and provides an ideal mounting surface for any attachments required by your application. The tool bar is furnished with threaded mounting holes or optional counterbored mounting holes. End face and bottom surface tapped mounting holes allow accurate and convenient vertical, horizontal and parallel alignment. Body Self-lubricating composite eads.... lear anodized aluminum alloy Tie Bolts Stainless steel Rod hrome plated stainless steel Piston Stainless steel Rod end Tool bar Ports Position #1 Seals Internally lubricated Buna-N ubrication Magnalube -G Rod bushing Bronze Ratings Standard Units all Series Stroke tolerance ± 1/64" Media Air Pressure rating, maximum psi Minimum recommended operating pressure psi Temperature rating ylinder.. 25 to +221 F ( 32 to +105 ) Temperature rating Electronic sensors to +176 F ( 20 to +80 ) Allowable Torsion oad and Rotational Tolerance Side loading should be avoided for any cylinder application. The smaller diameter twin rods will have more defl ection due to side load than the one standard rod in a comparable Square Pancake II cylinder. owever, the SN Series is designed to work satisfactorily against pure torsional loads. Maximum torsional load per bore size is shown in the following table. Angular eflection Approximate Angular eflection (egrees) due to max. torsional load Torsional Stroke oad Max. 0 to 1-1/ / /2 4 3/4 0.3 in-lbs less than / in-lbs less than /2 5.0 in-lbs less than in-lbs less than Freeplay Rotational Tolerance 3/4" (2) 1-1/16" (3) 1-1/2" (4) 2" (5) Max. Rotation ±1 ±3/4 ±1/2 ±1/2 10 ylinder Sizing Guide iameter (inch) 3/4 1-1/16 1-1/2 2 Rod iameter (inch) Rod Area (inch) Push Area (inch) Pull Area (inch) Specifi cations and prices subject to change without notice or incurring obligation
11 Nonrotating, Twin Rod Series SN ow to Order Series S - Square Pancake II Model N - Nonrotating, Twin Rod Action - double acting 2-3/4" 3-1-1/16" 4-1-1/2" 5-2" Stroke /8" 0-1/4" /8" 0-1/2" etc., thru " (see page 12 for standard strokes) Note: Special strokes are available on request. ontact Engineering or your local Fabco-Air istributor. Model Number Series Model Action Mounting Stroke Options Mounting Tapped mounting holes are standard in the basic model and need not be specifi ed. For other mounting specify only one option code. eave Blank - Basic Model PM - Pivot mount, pin 90 from port SM - Pivot mount, pin in-line with port Options Enter in alphabetical order E - ounterbored rod end tool bar (page 12) E - Magnet on piston for position sensing (See length adders pg. 13) 3/8" stroke minimum 1 K - Rod end tool bar rotated 90 M, M1, M4 - Magnet on piston and adhesive mounted dovetail extrusion to hold 1/4" dovetail sensors. (see sensors page 15) 3/8" stroke minimum 1 Q - ow temperature operation ( 40 F to +200 F) T1, T4 - Additional adhesive mounted dovetail extrusions located in position 1 or 4 V - Viton seals for media compatibility ( 15 F to +225 F) X - EXTRA Rod extension Example: X0.5 = 1/2" EXTRA Rod Extension X1 = 1" EXTRA Rod Extension 1 Not available with Viton seals or low temperature seals. ow to Order 1. Specify S, Model, Action and 2. Specify optional Mounting (if required), then Stroke 3. Specify the Options in alphabetical order Ordering example #1: SN3-PM0.375-V This model number specifi es a Square Pancake II nonrotating, double acting, cylinder with tool bar, 1-1/16" bore, pivot mounting, 3/8" stroke and Viton seals. Ordering example #2: SN This model number specifi es a Square Pancake II nonrotating, double acting, cylinder with tool bar, 2" bore, standard tapped mounting holes, and 2" stroke Specifi cations and prices subject to change without notice or incurring obligation 11
12 Square Pancake II ylinders Basic Model SN Twin Rod, Nonrotating ouble Acting Y 3 Places Each End 0.06 N NM N 2 B + Stroke See Note 1 2 E Threaded 2 Places 4 Places F Rod A Square Note 1: Magnetic Position Sensing ength Adders see page 13. A minimum stroke of 3/8" is required to sense end-of-stroke positions Standard Strokes All Models: 1/8 1/4 3/8 1/2 5/8 3/4 7/ /4 1-1/2 1-3/ / /2 4 Special strokes available. ontact Engineering or your local Fabco-Air distributor for information. Model Options Option E ounterbored Rod End Tool Bar E2 'd K - Thru ole 2 Places ' ole imensions (inches) N NM 0.06 N E2 ' 0.24 x 0.15 dp 0.29 x 0.18 dp 0.40 x 0.27 dp 0.49 x 0.33 dp K For SS #6 #8 1/4 5/16 imensions (inches) Approximate ylinder Weights (ounces) Base Adder per 1/8 of Stroke A B 1.31 N 0.69 N #6-32 UN #8-32 UN #10-24 UN 1/4-20 UN NM P #10-32 UNF 1/8 NPT 1/8 NPT 1/8 NPT E Thread #6-32 UN #8-32 UN 1/4-20 UN 5/16-18 UN 0.42 F Y Specifi cations and prices subject to change without notice or incurring obligation
13 Nonrotating Series SN imensions & Options Mounting Options PM Pivot Mount - Pin 90 from Port omplete with bronze pivot bushing. Also available as an accessory. See page 14. PB PA iameter for Pivot Pin PF P PT PS P PE SM Pivot Mount - Pin in line with Port omplete with bronze pivot bushing. Also available as an accessory. See page 14. PA iameter for Pivot Pin PR Radius PF PB P P PT PE PS imensions (inches) PA PB P 0.31 P PE PF PR PS PT eviations from Standard imensions (Options E or M) A minimum stroke of 3/8 is required to sense end-of-stroke positions. ength Adder (inches) Magnetic Position Sensing E or M Specifi cations and prices subject to change without notice or incurring obligation 13
14 Square Pancake II ylinders Accessories levis Bracket Anodized aluminum alloy hrome plated steel pin included J E Pin ia. x F ong A Square K Square imensions (inches) I ole for N Bolt The bracket is intended for mounting with either a rod eye or pivot mount; it is not intended to mount directly with the rear cylinder head. Kit No. B-3 B-6 B-8 A E F I J K N #6 #10 1/4 Rod Eye Steel with bronze pivot bushing and nut P Thread J T I JT E ole ia. Kit No. RE-2 RE-3 RE-4 RE-6 RE-7 RE-8 imensions (inches) E I J JT T P #10-32 UNF 5/16-24 UNF 3/8-24 UNF 1/2-20 UNF 5/8-18 UNF 3/4-16 UNF Pivot Mount Attachment with Mounting Screws Anodized Aluminum Alloy PA iameter for Pivot Pin PR Radius P PT PB PS PF P PE Kit No. PA-2 PA-3 PA-4 PA-5 PA-6 PA-7 PA-8 PA PB imensions (inches) P 0.31 P PE PF PR PS PT Specifi cations and prices subject to change without notice or incurring obligation
15 Position Sensing Sensor Specifications & Ordering Information Set Screw Encased in a plastic housing, dovetail style electronic sensors are corrosion resistant. 60 wire outlet allows close mounting. Two methods of mounting are available: 1. Tie bolt mounted clamps (Option -E) 2. Adhesive mounted dovetail extrusions (Option -M) Order sensors separately from the table below Sensor Pigtail 34 (1.34) 8.5 (.33) 1, 2 or 5 Meter able 32 (1.26) 9.8 (.39) Ordering Guide ovetail Style Magnetic Sensor with E Sensor Type Electronic Electronic Prewired 9 ft. Part No Quick isconnect Part No.* Wire eads 3 3 Sensor Temperature Range -20 to +80 (-4 to +176 F) Electrical haracteristics Sourcing PNP 6-24 V, 0.20 Amp Max current, 0.5 Voltage rop Sinking NPN 6-24 V, 0.20 Amp Max current, 0.5 Voltage rop Note*: Quick disconnect styles are supplied with 6 inch pigtail with male connector. Order female cordsets separately. Female ordsets for Quick isconnect ength 1 Meter 2 Meters 5 Meters Part No. F-1M F-2M F-5M Option -E Magnet on piston use tie bolt mounted clamps Tie Bolt To apply dovetail style sensors fi rst locate clamp in rough position on any of the tie bolts and lock it in place with the set screw. Next, make fi ne adjustment by sliding the sensor within the clamp and lock in place with its set screw. ovetail style sensor lamp Order clamps and sensors separately lamp Selection Guide Kit No. 900-F G To Fit 3/4, 1-1/16, 1-1/2, 2 2-1/2, 3 4 Option -M Magnet on piston and adhesive mounted dovetail extrusions Order sensors separately ovetail Extrusion ovetail style sensor Standard ovetail Rail Positions Stroke Range Position 3/4" 3/8" to 1-1/4" 2 & 4 3/4" 1-1/2" & above 2 1-1/16" & up 3/8" & above 2 Note: When alternate positions are specifi ed, the second of two required dovetail rails will be applied at position 2. (ontact factory for other combinations.) Specify Option M for mounting rail(s) located in standard position(2). Specify option M1 or M4 for mounting rail in alternate positions 1 or 4 respectively. Additional dovetail rails may be applied by specifying options T1 or T4. Specifi cations and prices subject to change without notice or incurring obligation
16 Basic Model SS SSR (0 to 1" Stroke) SSR (1-1/8 to 4" Stroke) SSX (0 to 1" Stroke) SSX (1-1/8 to 4" Stroke) Add per 1/8" of Stroke (SS, SSR, SSX) SW Add per 1/8" of Stroke ST Add per 1/8" of Stroke Mounting Options PM, SM (Pivot Mount) Square Pancake II ylinders ist Prices - Series SS, SSR, SSX, SW, ST $ $ $ Base Price by Size $ Adders by Size Prices effective September 1, 2011 $ $ $ Options No charge for Options TF, TN B (both ends) BF (front only) BR (rear only) E (Magnetic Piston Sensing) J (with Standard Seals) J (with Viton Seals) (ow Friction Seals) M, M1, M4 (Mag. Piston Sensing) Q (ow Temperature Seals) SSR - Spring Retract SSX - Spring Extend SS - ouble Acting SW, ST - ouble Rod Q (ow Temp. Seals with Option) SSR - Spring Retract SSX - Spring Extend SS - ouble Acting SW, ST - ouble Rod TM, TFM (Male Rod Thread each end) T1, T4 (Sensor Mounting Rail per rail) V (with Standard Seals) SSR - Spring Retract SSX - Spring Extend SS - ouble Acting SW, ST - ouble Rod V (with ow Friction Seals) SSR - Spring Retract SSX - Spring Extend SS - ouble Acting SW, ST - ouble Rod W (Rod Wiper, single rod) W (Rod Wiper, double rod) X (each 1/2" or fraction thereof - each end) Adders by Size Basic Model SN Adder per 1/8" of stroke 16 $ $ ist Prices - Nonrotating Series SN Base Price by Size $ Options No charge for Options E, K E (Magnetic Piston Sensing) M, M1, M4 (Mag. Piston Sensing) Q (ow temperature seals) T1, T4 (Sensor mounting rail per rail) V (Viton Seals) X (each 1/2" or fraction thereof) $ Mounting Options PM, SM (Pivot Mount) $ Specifi cations and prices subject to change without notice or incurring obligation Adders by Size $ $ Adders by Size $
17 Sensor Prices Electronic Sensor Type Sourcing Sinking Prewired Part No Price $ Quick isconnect Part No Price $ Female ord Set 1 Meter 2 Meters 5 Meters Part No. F-1M F-2M F-5M Price $ Sensor Mounting lamp Kit Number Price 3/4, 1-1/16, 1-1/2, F $ /2, G $ $5.55 Accessory Prices levis Bracket Rod Eye Pivot Mount Attachment Kits Kit No. B-3 B-6 B-8 Price $ Kit No. RE-2 RE-3 RE-4 RE-6 RE-7 RE-8 Price $ Kit No. Price PA-2 $16.30 PA PA PA PA PA PA Seal Kits Series SS, SSR, SSX, SW, ST Kit Numbers and Prices by Size Options Standard Viton (V) ow Temperature (Q) ow Friction () ow Friction-Viton (, V) ow Friction-ow Temperature (, Q) 3/4" SS-2-SK $7.10 SS-2-SKV $12.25 SS-2-SKQ $11.15 SS-2-SK $10.65 SS-2-SKV $19.90 SS-2-SKQ $ /16" SS-3-SK $6.70 SS-3-SKV $14.35 SS-3-SKQ $11.80 SS-3-SK $11.15 SS-3-SKV $27.50 SS-3-SKQ $ /2" SS-4-SK $7.35 SS-4-SKV $18.95 SS-4-SKQ $13.65 SS-4-SK $12.30 SS-4-SKV $32.70 SS-4-SKQ " SS-5-SK $8.45 SS-5-SKV $23.30 SS-5-SKQ $16.30 SS-5-SK $14.30 SS-5-SKV $48.00 SS-5-SKQ $ /2" SS-6-SK $8.95 SS-6-SKV $27.40 SS-6-SKQ $18.80 SS-6-SK $15.70 SS-6-SKV $55.50 SS-6-SKQ $ " SS-7-SK $10.60 SS-7-SKV $37.70 SS-7-SKQ $22.95 SS-7-SK $18.60 SS-7-SKV $65.35 SS-7-SKQ $ " SS-8-SK $12.85 SS-8-SKV $46.45 SS-8-SKQ $28.25 SS-8-SK $22.10 SS-8-SKV $78.55 SS-8-SKQ $45.90 Seal Kits Nonrotating Series SN Options Standard Viton (V) ow Temperature (Q) Kit Numbers and Prices by Size 3/4" SN-2-SK $5.80 SN-2-SKV $10.95 SN-2-SKQ $ /16" SN-3-SK $6.20 SN-3-SKV $13.75 SN-3-SKQ $ /2" SN-4-SK $6.65 SN-4-SKV $18.25 SN-4-SKQ $ " SN-5-SK $7.65 SN-5-SKV $22.50 SN-5-SKQ $ Specifi cations and prices subject to change without notice or incurring obligation 17
18 18 Notes
19 Notes 19
20 Square Pancake II ylinders FABO-AIR, Inc N.E. 49th Avenue Gainesville, F Tel (352) Fax (352) service@fabco-air.com Web Site: Fabco-Air Product atalog ibrary ylinders, Valves and Accessories atalog #V9 Pancake II Air ylinders atalog Pan2-2 Stainless Steel Body Air ylinders atalog SSB-03 ISO 6431 ylinders atalog # FAQR-09 Twin nr Rod, Non-Rotating nrota tin gair ylinders - atalog # FF-09 and atalog # FXS-09 Multi-Power Air Presses atalog # FP16 inear Slides - 6 Families atalog # S-03 Pneumatic Grippers, Parallel Jaw and Angular Motion - atalog # GR-8 Pneumatic Angular Grippers atalog # FKA-09 ISO 6432 ylinders atalog # FAE-09 NFPA Interchangeable Air ylinders - atalog # NF-6 Global blseries Mti Metric Air ylinders - atalog # G-15 Swing lamps Bulletin # S-B04 Manifold Solenoid Valves atalog # FVS.Y-09 Air Pilot t&s Solenoid idvalves atalog # FVA.E Modular Mdl rair Preparation ation System - FRs atalog # FR-06 Stopper ylinders atalog # ST-S Swing lamps, Pneumatic & ydraulic atalog # FM. Specifi cations and prices subject to change without notice or incurring obligation Guided Motion Air ylinders atalog # FGM-10 Air Slide Tables atalog # FGXS-10
FDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationOriginal & T Series 8 Bores, 1/2" 4"
Original & T Series 8 Bores, /2" 4" Section Index Page Features & Benefi ts....2 General, Standard Specifi cations....2 Construction Details....3,.4 How a Pancake is built Information....5,.6 How a Pancake
More informationOriginal Line Cylinders
Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non- Original Line Steel (Bell Ring Style) Original
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationSensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationVertical Break Parallel (VBP) / Vertical Break Slant (VBS)
August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers
More informationLaserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationDPE Parallel Gripper- Electric Gripper Series
1.8 DPE Parallel Gripper- Electric Gripper Series Electrically Actuated 24 VDC, 4-wire input: power, ground, open & closed signals. 100% duty cycle for high throughput. Light Switch Simplicity Plug and
More informationSpecification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationCYLINDER SERIES ISO 15552 (EX ISO 6431), Ø 32-63 mm TWO-FLAT
YIR SRIS ISO 2 (X ISO 3), - mm TWO-T This version of cylinder is used to keep the parts fixed to the piston rod at an angle and to apply torques within the specified limits. The piston rod of the Two lat
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationPneumatic Cylinders. Composite, round line repairable and disposable, and NFPA square interchangeable
Composite, round line repairable and disposable, and NFPA square interchangeable Table of Contents Series 01 Micro-Air Cylinders 1/2, 3/4, & 1-1/8 Bore Sizes...9 Application Information, Features, Capabilities...9
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationPRODUCT RELEASE CKMTA12 / 24. Copyright 2011 by ARB Corporation Limited
PRODUCT RELEASE CKMTA12 / 24 Copyright 2011 by ARB Corporation Limited ARB 4x4 ACCESSORIES 720 SW 34Th Street Tel: (425) 264-1391 Renton, Washington 98057 Fax: (425) 264-1392 USA North and South American
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationInstallation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationWorking Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationTHE SIMPLEX HAND PUMP
INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.
More informationSeries NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore
CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationInnovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationModel 43AP Pneumatic Controller, Style B
Instruction MI 011-476 January 1980 Model 43AP Pneumatic Controller, Style B Installation and Operation Model 43AP Controller continuously detects the difference between a process measurement and its set
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationRODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationSureSite Magnetic Liquid Level Indicator
SureSite Magnetic Liquid Level Indicator Instruction Bulletin No. 177664-1 (Rev. E) Section 1: Weldments Thank you for purchasing the GEMS SureSite Magnetic Level Indicator. Please read this document prior
More informationTS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
More information9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)1254 615100
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HOSE/UMBILICAL CUTTER HCV155 PRODUCT CODE No. 980217 INSTRUCTIONS
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationBULLETIN 70.00-1 OCTOBER 2012. DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More informationStep-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
More informationPlastic Injection Molding
Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More information2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationCAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0113-GB NEW MODELS Flat-face quick-release couplings UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 FLAT-FACE QUICK-RELEASE COUPLINGS Features Benefits Applications Flat-face shut-off valves: easy to clean.
More informationPOLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More information6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:
Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More information5800 Temperature Sensor Cable Assembly
5800 Temperature Sensor Cable Assembly Removal and Replacement Instruction Sheet #60-4702-070 Revision D, January 14, 2013 Overview The 5800 has two refrigeration temperature sensors, one attached to the
More information