PTFE Seals Worldwide Made in Denmark
|
|
|
- Lynn Stanley
- 7 years ago
- Views:
Transcription
1 PTF Seals Worldwide Made in enmark
2 of high quality PTF products materials experience, helping customers to make the right decision when specifying standard and non standard PTF seals and bearings. llways fully updated and stateoftheart N machines Our production facilities are fully updated and include stateoftheart N machines.. business founded in 1969 in enmark. 30 years ago the demands for hydraulic seals was split from the business and a new era of optimizing the PTF sealing products
3 How to define ccofluor seals SLTION UI: Our part number system states the types of seals: F Material, in this case PTF + 40% ronze, green (ORing), in this case "" for dim. x 7,75 Nom. diameter x 10 type, in this case Piston ouble acting To find the right type of seal, see Overviews on the following pages. Select the profile cross section in accordance with the groove dimension, and the nominal size of the seal To order light or heavy version, please choose "" for light and "" for heavy version Types of standard materials are found in the table below Standard Materials Material ode ompound olour Temperature range Fref. (standard)* PTF, Virgin F PTF, modified TFM 1600 White White PTF, modified Turquise PTF, modified, F approved Turquise PTF, 10% arbon lack PTF, 10% arbon Fiber lack PTF, 25% arbon/graphite lack PTF, carbon, graphite, additiv. PTF, 15% raphite ark, brown lack PTF, 15% lassfiber, Mos2 rey PTF, 25% lassfiber, Mos2 rey PTF, 25% lassfiber White/light grey PTF, 40% ronze, green reen PTF, 60% ronze rown PTF, 50% Stainless steel rey PH 1000 (UHMWP) F White ONOL Light brown POM White POM lack PUR L 72 Yellow PUR L 58 PK Natur Yellow Natural/brownish grey *There are hundreds of different PTF Materials with variants of fillers. For more information please contact ccofluor /S Wiper seal uide ring¹ ylinder tube Static seal² Piston ylinder bottom Wiper Seals: Rod Piston Rod Seals: uide Rings¹: Static Seals²: Piston seals: Static seal² Rod Piston seal uide ring ¹Piston & Rod uide Rings: PTF, phenolic or polyester ²Static Seals: ORing + backup ring. PTF, Hytrel + PU
4 PROFIL OVRVIWS: Piston & s Piston seal Nom. ia. width ORing 8,0 14,9 2,45 8,0 16,9 2,2 2,45 1,78 15,0 39,9 3,75 17,0 26,9 3,2 3,65 2,62 40,0 79,9 5,5 27,0 59,9 5,35 3,53 80,0 132,9 7,75 60,0 199,9 7,55 5,33 133,0 329,9 10,5 200,0 255,9 10,25 7,0 F 330,0 669,9 12,25 F 256,0 669,9 12,0 7,0 670,0 999,9 14,0 670,0 999,9 9,5 13,65 8,4 3,0 7,9 8,0 18,9 19,0 37,9 38,0 199,9 200,0 255,9 256,0 649,0 650,0 999,9 446 F Piston & s, ISO 544 Nom. ia. width ORing s 8,0 14,9 2,2 2,5 1,78 6,0 14,0 15,0 39,9 3,2 3,75 2,62 12,0 25,0 40,0 79,9 5,5 3,53 20,0 63,0 80,0 132,9 7,75 5,33 56,0 160,0 133,0 329,9 10,5 7,0 160,0 250,0 F 330,0 669,9 12,25 7,0 250,0 660,0 F 444 Wiper, single & double acting Piston Wiper width ORing Rod Wiper Nom. ia. Nom. ia. 3,7 2,4 1,78 6,0 11,9 5,0 3,4 2,62 12,0 64,9 6,0 4,4 3,53 65,0 250,9 8,4 6,1 5,33 251,0 420,9 11,0 8,0 7,0 421,0 650,9 14,0 10,0 8,4 651,0 999,0 oubleacting Wiper 587 Piston Wiper width ORing Nom. ia. 3,8 2,62 4,4 2,62 6,1 3,53 9,5 8,0 5,33 14,0 12,0 7,0 16,0 13,65 8,4 Rod Wiper Nom. ia. 6,0 11,9 12,0 64,9 65,0 250,9 251,0 420,9 421,0 650,9 651,0 999,0 487 Rotation seals Piston seal Nom. ia 8,0 39,9 40,0 79,9 80,0 132,9 133,0 329,9 330,0 669,9 670,0 999,9 width 2,2 3,2 9,5 ORing 2,45 1,78 3,75 2,62 5,5 3,53 7,75 5,33 10,5 7,0 14,0 8,4 Nom. ia. 6,0 18,9 19,0 37,9 38,0 199, , ,9 650,0 999,9 Piston seals 553 Piston seal width ORing Nom. ia 40,0 79,9 5,0 2 x 2,62 80,0 132,9 8,3 6,5 2 x 3,53 133,0 462,9 12,3 9,0 2 x 5,33 463,0 700,0 1 15,5 2 x 7,00
5 Piston & s ORing Width epth F 16,0 39,9 40,0 79,9 80,0 132,9 133,0 252,9 253,0 462,9 463,0 700,0 9,5 11,0 5,5 7,75 10,5 12,25 14,0 17,5 3,53 5,33 7,0 7,0 8,4 10,0 F Width epth ORing 5,0 13,9 2,4 1,45 1,78 4,0 9,9 14,0 24,9 3,6 2,25 2,62 10,0 19,9 25,0 45,9 4,8 3,1 3,53 20,0 39,9 46,0 124,9 7,1 4,7 5,33 40,0 119,9 125,0 669,9 9,5 6,1 7,0 120,0 649,9 670,0 999,9 10,0 7,5 8,4 650,0 999,9 Spring nergized Piston & s without backup ring 710 Width epth ORing 6,0 13,9 2,4 1,45 1,78 4,0 9,9 14,0 24,9 3,6 2,25 2,62 10,0 19,9 25,0 45,9 4,8 3,1 3,53 20,0 39,9 46,0 124,9 7,1 4,7 5,33 40,0 119,9 125,0 9,5 6,1 7,0 120,0 649,9 610 Spring nergized Piston & s with backup ring 6,0 13,9 Width epth ORing 3,8 1,45 1,78 4,0 9,9 14,0 24,9 4,65 2,25 2,62 10,0 19,9 25,0 45,9 5,7 3,1 3,53 20,0 39,9 46,0 124,9 8,5 4,7 5,33 40,0 119,9 125,0 11,2 6,1 7,0 120,0 649,9 Roof shaped seals PTF 25% arbon PTF Virgin PTF conform to F regulations ackup Rings Metric, Imperial & US standards F120: Solid F110: Split F100: Spiral uide strips, filled PTF X Y Z ut uide strips for Standard or Special dimensions up to 95 mm width Full length Rolls or cut in pieces to length Standard or teardrop dynamic surfaces Standard material: PTF 40% ronze & PTF 25% arbon uide Strips width [mm] Thickness [mm] 2,5 3,2 4,0 5,6 9,7 10,0 12,0 15,0 20,0 25,0 1,00 1,50 1,55 2,00 2,50 3,00 4,00 Standard dimensions For further information, please contact OFLUOR /S
6 Knowledge, flexibility and service Knowledge, flexibility and service are some of the key words, when we describe our mission. We work hard to achieve high customer satisfaction, both regarding our products and the support we offer. Research and development for customers worldwide ichtungen, seals, joints... Whether erman, nglish or Frenchspeaking, our customers all over the world appreciate our highquality seals for hydraulic applications and everywhere else, where seals are used. Our guide tape is some of the best available and we are proud of setting the market standard, and we constantly strive to develop and improve our products. Not in order to keep up, but to be a part of the development. Keep in touch! Visit us on or call us if you have any inquiries. Our helpful team is always happy to team up with partners in order to solve whatever problems they might encounter.
7 VO Seal Team ivision PTF seals and bearings FFKM ynalast Nordic ngineering & sales France Plastic, Seal Jet & Lab. injection moulding of thermoplastic materials Hydraulic Seals
8 ccofluor /S Topstykket 2123 K3460 irkerød Phone: Fax: www. accofluor.com
SKF Seals Knowledge Engineering. Designed to optimize machinery performance
SKF Seals Knowledge Engineering Designed to optimize machinery performance From moulding high quantities to mach Sealing for power transmission The performance and service life of a power transmission
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Working Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
ETP 45 (EXTERNAL TECHNICAL PAPER NUMBER 45)
TAPPEX THREAD INSERTS LIMITED Masons Road Stratford-upon-Avon Warwickshire CV37 9NT Telephone: +44(0) 1789 206600 Fax: +44(0) 1789 414194 Email: sales@tappex.co.uk ETP 45 (EXTERNAL TECHNICAL PAPER NUMBER
Seamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
Merkel Sealing Technology
Merkel Sealing Technology Seals and Sealing Systems for the Metal Processing Industry Merkel Heavy Industry Strong seals for the Metal Processing Industry Merkel Heavy Industry: sealing technology acknowledged
ClaronPolyseal. Table 1 shows the properties for each type of bearing. Values shown as low/high should be interpreted as relative to each other.
Claron produce four main types of polymer bearings for use in hydraulic cylinder applications. Each has a varying set of properties to cover a wide range of applications. The following tables are designed
At a glance. Salzgitter Mannesmann Precision
At a glance Salzgitter Mannesmann Precision The company in the group Headquarter SMP Sales Production locations The Group-Structure Mannesmannröhren-Werke GmbH manages the division Energy in the Salzgitter
produces and delivers products worldwide can provide the optimal are dedicated to supplying you with superior advice and global support.
www.ppcinsulators.com The very Best. The very Best. That s what we deliver. ong od Insulators Only a company that develops, produces and delivers products worldwide can provide the optimal solution for
Valve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
Single Cavity Mould. Basic Mould Construction. Ejection System. Multi Cavity Mould
Basic Mould Construction Basic mould construction: Core plate and Core (moving) Cavity plate and cavity (fixed) Other features include Guide pillars / guide bush Sprue bush Locating ring Single Cavity
For New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
Chains. Product Catalogue. Bringing Good Things Ahead
Chains Product Catalogue Bringing Good Things Ahead Contents Welcome 3 Developement of plastic chains 4 FT70 5 RT114 6 RTF70 7 RTF114 8 FT54 9 KLDH50 10 Welcome to the world of Conveyor Solutions Fredriksons
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
ORIFICE PLATES. CONCENTRIC BORE: For standard fluid conditions an Orifice Plate would have a centrally located orifice bore.
SUPERIOR PRODUCTS, INC. 20550 MADISON STREET, TORRANCE, CA 90503 ORIFICE PLATES MANUFACTURING STANDARDS: Superior Products manufactures Orifice Plates in strict accordance with the specifications of: AGA.,
LINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
KELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
Cannon T4 Modular Data Centres. For Outside Deployment & Challenging Environments
Cannon T4 Modular Data Centres For Outside Deployment & Challenging Environments A high performance, full specification Data Centre, up to Tier 4* resilience, instantly deployable A highly secure Data
ProTurn Power Turn Belts, Merge Table Belts
ProTurn Power Turn Belts, Merge Table Belts WHAT CAN WE OFFER? POWER TURN REPLACEMENT BELTS FROM BELTSERVICE In the case of conveyors, sometimes the most direct route isn t a straight line. In these situations,
Rolling Bearing for Environments of Ultrahigh Temperatures
[ New Product ] Rolling Bearing for Environments of Ultrahigh s Miki ARIHANA* Takayuki KAWAMURA** In recent years the demand of bearings which are used at 4 degree C for tenter clips, glassmaking facility
Contents BUSHING S ELECTION P RODUCT S PECIFIC I NFORMATION TECHNICAL DATA A SSORTMENT. World s Widest Bushing Stock Assortment 2
Contents BUSHING S ELECTION World s Widest Bushing Stock Assortment 2 SKF Bushings Product Selection Guide 4 SKF Bushings Technical Data 6 Bushing Selection Overview of Technical Data Temperature range
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
SPIRAL WOUND GASKETS Driven by the industry's need for safe, effective sealing solutions, Flexitallic invented the spiral wound gasket.
innovate/customize/educate SPIRAL WOUND GASKETS Driven by the industry's need for safe, effective sealing solutions, Flexitallic invented the spiral wound gasket. www.flexitallic.eu FLEXITALLIC The Flexitallic
HJK CONSULTING ENGINEERS. Project Management Technology Operating Consulting Excellence
HJK CONSULTING ENGINEERS Project Management Technology Operating Consulting Excellence COLD ROLLING MILL EQUIPMENT HJK Consulting Engineers is supporting its client in sales of the following southern Europe
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Makes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
TopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
Garage Sectional Doors
Garage Sectional Doors FROM TECKENTRUP TOP CLASS QUALITY DOORS MADE OF STEEL; ALUMINIUM OR WOOD W E O P E N T H E D O O R S F O R P R O G R E S S ECONOMICAL AND SPACE-SAVING FOR EVERY STRUCTURAL SITUATION
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
valid as of 1 April 2014 Intec injection hose system
FRANK Product List valid as of 1 April 2014 Intec injection hose system Intec injection hose systems Intec injection hose systems ensure secure, simple and rapid sealing of horizontal and vertical construction
TABLE OF CONTENTS FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES... 4 3 DEFINITIONS... 4
TITLE SPECIFICATION FOR MASTER PADLOCKS, CYLINDER LOCKS AND KEYS REFERENCE REV DATE: JAN 2009 PAGE: 1 OF 26 TABLE OF CONTENTS Page FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES...
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
PP MASTERTM S T I F F N E S S S N 1 2 R I N G THE NEW POLYPROPYLENE SEWER PIPE SYSTEM
PP MASTERTM R I N G S T I F F N E S S S N 1 2 THE NEW POLYPROPYLENE SEWER PIPE SYSTEM The future today. PP MASTERTM The new standard in sewer construction. A powerful piece of the future: PP MASTER, a
There is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
Special Rolling Bearings
Special Rolling Bearings Special Rolling Bearings KINEX produces, except a large number of types and sizes of standardized rolling bearings of both basic and modified designs presented in the preceding
Free piston Stirling engine for rural development
Free piston Stirling engine for rural development R. Krasensky, Intern, Stirling development, r.krasensky@rrenergy.nl W. Rijssenbeek, Managing director, w.rijssenbeek@rrenergy.nl Abstract: This paper presents
Merkel Seals and Sealing Systems for the Metal Processing Industry. Product Information Metal Processing Industry
Merkel Seals and Sealing Systems for the Metal Processing Industry Product Information Metal Processing Industry Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global
DIY Poly Digester. What is Supplied in the Kit. Sketch of Arrangement
DIY Poly Digester What is Supplied in the Kit 4 m of clear polyethylene layflat tube Inlet tube (100mm PVC pipe, 40 cm long) 0.4 m of 19mm dia PVC pipe 0.4 m of 13mm dia black poly tube 2 m of 12 mm dia
Group. The precision company SURFACE TECHNOLOGIES INTERNATIONAL. Hard chrome. Surface solutions by STI Group. English
Group SURFACE TECHNOLOGIES INTERNATIONAL The precision company Hard chrome English Surface solutions by STI Group Trust the Market Leader Thanks to its technological competence, its modern infrastructure,
Schlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
Contents BUSHING S ELECTION P RODUCT S PECIFIC I NFORMATION TECHNICAL DATA A SSORTMENT. World s Widest Bushing Stock Assortment 2
SKF bushings Contents BUSHING S ELECTION World s Widest Bushing Stock Assortment 2 SKF Bushings Product Guide 4 SKF Bushings Technical Data 6 Bushing Selection Overview of Technical Data Temperature range
San Antonio Water System Standard Specifications for Construction ITEM NO. 1100 SLIP-LINING SANITARY SEWERS
ITEM NO. 1100 SLIP-LINING SANITARY SEWERS 1100.1 DESCRIPTION: This item shall consist of slip-lining sanitary sewer pipe, which is accomplished by pulling or pushing liner pipe into existing sewers by
Terminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
#25 The Basics of Lightweight Conveyor Belting
#25 The Basics of Lightweight Conveyor Belting The overall belting market share for lightweight conveyor belting has increased modestly over the past couple of decades. The primary reasons for the increase
Strip Flatness Prediction in a 4 High Tandem Mill Using a Dynamic Model.
Strip Flatness Prediction in a 4 High Tandem Mill Using a Dynamic Model. M. A. Bello-Gomez 1, M. P. Guerrero-Mata 1, L. A. Leduc Lezama 1, T. P. Berber- Solano 1, L. Nieves 2, F. Gonzalez 2, H. R. Siller
PRESSBLOWER Injection Blow Moulder
PRESSBLOWER Injection Blow Moulder PRESSBLOWER DSE 140 PRESSBLOWER DSE 250 Tasks Solutions C. V. Joint Boots Bellows used in automobiles are subject to permanent stress. Under quality aspects this means
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
TechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
engineering flexible and rigid holders
Doctoring systems engineering GOOD DOCTORING IS ESSENTIAL FOR EFFICIENT PAPERMAKING! The proper design and application of a doctoring system can improve the performance of your paper machine. BONETTI doctoring
Company and Product Presentation
Company and Product Presentation Company Presentation NBG Systems & FCT are private companies owned by NBG Holding Both are Austrian companies, operating under the highest European Union requirements &
How To Make A Seal
Inspection Rapid Prototyping Production ISO 9001 REGISTERED QMS ISD Table of Contents Introduction 3 Rapid Seal 3 Quality Control 3 Engineering & Drafting 3 Capabilities 3 Materials & Suppliers 4 Seal
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
Secolor Selection Guide. User s Manual. 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN
Secolor Selection Guide User s Manual 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN 1 INTRODUCTION...3 2 FEATURES...3 2.1 SEARCH FUNCTIONALITY...4 2.1.1 ISO / ANSI...4 2.1.2 Insert designation...4
Pipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
PROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
The world leader in conveyor pulleys
The world leader in conveyor pulleys You ask. We Deliver. Chantland pulleys and rollers come in virtually any diameter, wall thickness, length, shaft size or end type. They re built from stainless steel,
Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
Spiral pipe plants. Tailor-made solutions with measurable benefits
Spiral pipe plants Tailor-made solutions with measurable benefits SMS group A leader in plant construction and mechanical engineering The SMS group ranks among leading companies in the plant construction
Uniquely designed and engineered specifically for the pulp and paper industry.
Universal SPU2 Series Uniquely designed and engineered specifically for the pulp and paper industry. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING Introduction The main utilization of GFRP Composites is extended to the entire field of temporary consolidation. The success of this application,
Hydraulic Jack Units. Contact Us! 888-577-EECO (3326) Delivery & Lead Times
Hydraulic Jack Units Elevator Equipment Corporation (EECO) has been manufacturing hydraulic elevator equipment since 1946, and is one of the leading suppliers in the industry for hydraulic jack units and
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
Free Stall Cleaner System with Cable. A new generation of equipment and systems. GEA Farm Equipment Houle
Free Stall Cleaner System with Cable A new generation of equipment and systems GEA Farm Equipment Houle engineering for a better world GEA Farm Technologies SW Series Cable Drive Unit A new series of cable
ZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS
ZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS CATALOG OF BEARINGS Contents Introduction... 3 Technical Section... 4 Single Row Ball Bearings... 4 Self-Aligning Ball Bearings... 4 Special Ball Bearings...
DSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
FILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
Typical values for a Kapton Polyimide tape wrapped sample, according to NEMA Specifications
DACRON DACRON GLASS FIBER COVERED MAGNET WIRE CLASS 200 INSULATION DACRON Glass Fiber-covered Magnet Wire is manufactured by serving a combination of glass and Dacron fibers over a bare or film-coated
Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
Drawn Cup Needle Roller Bearings
Drawn up Needle Roller Bearings NSK has introduced the most advanced bearing technology, offering unprecedented precision and reliability. Available in two types caged and full complement. High-quality
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Tubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Mechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
Integrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
Product catalogue. Gaskets, seals and o-rings
Product catalogue Gaskets, seals and o-rings Finland OyKLINGER Klinger Finland Oy is an import company in the technical trade sector. We help our customers increase their reliability by together developing