PROGETTI DI NORMA ISO IN INCHIESTA
|
|
|
- Beverley Anderson
- 8 years ago
- Views:
Transcription
1 PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 4 di UNInotizie del 28 febbraio 2013 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio Diffusione: fax diffusione@uni.com Period from 1 January to 31 January 2013 * Available in English only Materials for the production of primary aluminium ISO/DIS 10143* Carbonaceous materials for the production of aluminium Calcined coke for electrodes Determination of the electrical resistivity of granules (Revision of ISO 10143:1995) Data di scadenza: Mechanical testing of metals ISO/DIS 16808* Metallic materials Sheet and strip Determination of biaxial stress-strain curve ny means of bulge test with optical measuring systems ISO/DIS 16842* Metallic materials Sheet and strip Biaxial tensile testing method using cruciform specimen Data di scadenza: ISO/DIS 17340* Metallic materials Ductility testing High speed compression test for porous and cellular metals Data di scadenza: Non-destructive testing ISO/DIS 12715* Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams (Revision of ISO 12715:1999) Data di scadenza: Nuclear energy, nuclear technologies and radiological protection ISO/ASTM DIS 51275* Practice for use of a radiochromic film dosimetry system (Revision of ISO/ASTM 51275:2004) ISO/ASTM DIS 51607* Practice for use of the alanine-epr dosimetry system (Revision of ISO/ASTM 51607:2004) 1
2 ISO/ASTM DIS 51650* Practice for use of a cellulose triacetate dosimetry system (Revision of ISO/ASTM 51650:2005) ISO/ASTM DIS 51818* Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 kev (Revision of ISO/ASTM 51818:2009) Paper, board and pulps ISO/DIS 14453* Pulps Determination of acetone-soluble matter (Revision of ISO 14453:1997) ISO/DIS * Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (Revision of ISO :2005) Plastics ISO/DIS * Plastics Thermoplastic polyurethanes for moulding and extrusion Part 1: Designation system and basis for specifications ISO/DIS * Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties ISO/DIS * Plastics Thermoplastic polyurethanes for moulding and extrusion Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content Road vehicles ISO/DIS * Road vehicles Fuse-links Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures (Revision of ISO :2007) Data di scadenza: ISO/DIS * Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 7: Data link security (Revision of ISO :2001) Data di scadenza: ISO/DIS 16552* Heavy commercial vehicles and buses Stopping distance in straight-line braking with ABS Open loop and closed loop test methods ISO/DIS * Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 1: Definitions and parameters (Revision of ISO :2002) ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 1: General requirements and definitions ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 2: Performance and general test methods 2
3 ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 3: Check valve ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 4: Manual valve ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 5: Tank pressure gauge ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 6: Overpressure regulator ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 7: Pressure relief valve ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 8: Excess flow valve ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 9: Gas-tight housing and ventilation hose ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 10: Rigid fuel line in stainless steel ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 11: Fittings ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 12: Rigid fuel line in material other than stainless steel ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 13: Pressure control regulator ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 14: Differential pressure fuel content gauge ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 15: Capacitance fuel content gauge ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 16: Heat exchanger - vaporizer ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 17: Natural gas detector 3
4 ISO/DIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 18: Gas temperature sensor ISO/DIS 16380* Road Vehicles Blended Fuels Refuelling Connector Data di scadenza: Rolling bearings ISO 10317:2008/DAmd 1* Rolling bearings Tapered roller bearings Designation system Amendment 1 Data di scadenza: Ships and marine technology ISO/DIS * Ships and marine technology - Floating pneumatic rubber fenders Part 1: High pressure (Revision of ISO 17357:2002, ISO/NP 17357) Data di scadenza: ISO/DIS * Ships and marine technology - Floating pneumatic rubber fenders Part 2: Low pressure (Revision of ISO 17357:2002, ISO/NP 17357) Data di scadenza: ISO/DIS 14886* Ships and marine technology - Large Yachts - Structural fire protection for FRP yachts Societal security ISO/DIS 22322* Societal security Emergency management Public warning Data di scadenza: Solid biofuels ISO/DIS 16559* Solid biofuels Terminology, definitions and descriptions ISO/DIS 16948* Solid biofuels Determination of total content of carbon, hydrogen and nitrogen ISO/DIS 16967* Solid biofuels Determination of major elements ISO/DIS 16968* Solid biofuels Determination of minor elements Sports and recreational equipment ISO/DIS 9523* Touring ski-boots for adults Interface with touring ski-bindings Requirements and test methods (Revision of ISO 9523:2008) Steel ISO/DIS 5002* Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities (Revision of ISO 5002:2008) Data di scadenza:
5 Textile machinery and accessories ISO/DIS 21485* Textile machinery Draw frame for cotton spinning Vocabulary and principles of construction (Revision of ISO 21485:2006) Data di scadenza: ISO :2001/DAmd 2* Textile machinery Noise test code Part 1: Common requirements Amendment 2 ISO :2001/DAmd 2* Textile machinery Noise test code Part 2: Spinning preparatory and spinning machinery Amendment 2 ISO :2001/DAmd 2* Textile machinery Noise test code Part 3: Nonwoven machinery Amendment 2 ISO :2001/DAmd 2* Textile machinery Noise test code Part 4: Yarn processing, cordage and rope manufacturing machinery Amendment 2 ISO :2001/DAmd 2* Textile machinery Noise test code Part 5: Weaving and knitting preparatory machinery Amendment 2 ISO :2001/DAmd 2* Textile machinery Noise test code Part 6: Fabric manufacturing machinery Amendment 2 ISO :2001/DAmd 2* Textile machinery Noise test code Part 7: Dyeing and finishing machinery Amendment 2 Timber structures ISO/DIS 10983* Timber Finger joints Minimum production requirements and testing methods (Revision of ISO 10983:1999) Data di scadenza: ISO/DIS 17754* Torsional resistance of driving in screws Data di scadenza: Tobacco and tobacco products ISO/DIS * Cigarettes Determination of loss of tobacco from the ends Part 3: Method using a vibrobench Tractors and machinery for agriculture and forestry ISO/DIS * Agricultural and forestry machinery Inspection of sprayers in use Part 1: General ISO/DIS * Agricultural and forestry machinery Inspection of sprayers in use Part 2: Horizontal boom sprayers 5
6 ISO/DIS * Agricultural and forestry machinery Inspection of sprayers in use Part 3: Vertical boom sprayers, mistblowers and similar Tyres, rims and valves ISO/DIS * Bicycle tyres and rims Part 2: Rims (Revision of ISO :1996, ISO :1996/Amd 1:2001) Data di scadenza: Water quality ISO/DIS * Water quality Sampling Part 6: Guidance on sampling of rivers and streams (Revision of ISO :2005) Data di scadenza: Welding and allied processes ISO/DIS 23277* Non-destructive testing of welds Penetrant testing of welds Acceptance levels (Revision of ISO 23277:2006) Data di scadenza: ISO/DIS 23278* Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels (Revision of ISO 23278:2006) Data di scadenza: ISO/DIS 669* Resistance welding Resistance welding equipment Mechanical and electrical requirements (Revision of ISO 669:2000) Wood-based panels ISO/DIS 1954* Plywood Tolerances on dimensions (Revision of ISO 1954:1999) 6
PROGETTI DI NORMA ISO IN INCHIESTA
PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 17 di UNInotizie del 30 settembre 2012 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio
PROGETTI DI NORMA ISO IN INCHIESTA
PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 9 di UNInotizie del 15 maggio 2012 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio
PROGETTI DI NORMA IN INCHIESTA
PROGETTI DI NORMA IN INCHIESTA Allegato al n. 7 di UNInotizie del 15 aprile 2009 I progetti di norma UNI (puramente nazionali, ovvero non recepimenti di norme EN o adozioni di norme ISO) sottoposti alla
PROGETTI DI NORMA IN INCHIESTA
PROGETTI DI NORMA IN INCHIESTA Allegato al n. 2 di UNInotizie del 31 gennaio 2011 I progetti di norma UNI (puramente nazionali, ovvero non recepimenti di norme EN o adozioni di norme ISO) sottoposti alla
#25 The Basics of Lightweight Conveyor Belting
#25 The Basics of Lightweight Conveyor Belting The overall belting market share for lightweight conveyor belting has increased modestly over the past couple of decades. The primary reasons for the increase
Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
Application of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd
Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines
THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST
THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST Instruction: Check each test method for which you are requesting accreditation. An asterisk beside the NVLAP Test Method Code indicates that proficiency
REMI Industries for v9 Models
1 Forestry, fishing, related activities, and other 113-115 1 Forestry and logging; Fishing, hunting, and trapping 113, 114 1 Forestry; Fishing, hunting, and trapping 1131, 1132, 114 2 Logging 1133 2 Agriculture
جامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
INDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
Waste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
ΙΕΘΝΕΙΣ ΕΚΘΕΣΕΙΣ ΣΤΗ ΤΟΥΡΚΙΑ 2014 ΟΝΟΜΑΣΙΑ ΕΠΙΧΕΙΡΗΜΑΤΙΚΗΣ ΕΚΘΕΣΗΣ ΚΛΑ Ο ΠΟΥ ΑΦΟΡΑ ΗΜΕΡΟΜΗΝΙΑ ΙΕΞΑΓΩΓΗΣ
AV-IST 2014 Istanbul Hunt and Hunting Equipment, Shooting, Outdoor Sports, Camping, Caravan and Amateur Fishing Fair January 22-25, 2014 EURASIA STOCK BREEDING 2014 4 th Stock Breeding, Equipment, Poultry
Australian/New Zealand Standard
AS/NZS ISO 3834.5:2008 ISO 3834-5:2005 AS/NZS ISO 3834.5:2008 Australian/New Zealand Standard Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Cooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
STANDARDS FOR THE MATERIALS
STANDARDILUETTELO 1(15) Kpl Standardin numero STANDARDS FOR THE MATERIALS 1 EN 10204 2004-10 Metallic products.types of inspection documents 2 EN 10079 1992-10 Definition of steel products 3 EN 10027-1
ANSI Accredited Standards Developer ANS Percent of ANS American Concrete Institute 0 American Fence Association 0 American Orthotic and Prosthetic
ANSI Accredited Standards Developer ANS Percent of ANS American Concrete Institute 0 American Fence Association 0 American Orthotic and Prosthetic Association 0 American Society of Plumbing Engineers 0
PROPERTIES OF MATERIALS
1 PROPERTIES OF MATERIALS 1.1 PROPERTIES OF MATERIALS Different materials possess different properties in varying degree and therefore behave in different ways under given conditions. These properties
New Malaysian Standard
MALAYSIAN STANDARDS APPROVED ON 06/01/2014 BY THE MINISTRY OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE WITH THE STANDARDS OF MALAYSIA ACT (ACT 549) New Malaysian Standard ISC B : Chemicals and
NON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract
NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from
Employment Change Due to Carbon Pricing, 2035 Policy Scenario Vs Baseline Industry Name North American Industrial Classification System # (NAICS)
Employment Change Due to Carbon Pricing, 2035 Policy Scenario Vs Baseline Industry Name North American Industrial Classification System # (NAICS) 2035 (Net Jobs) Construction - 23 4774 1.21% Scientific
Specifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
The Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17021:2011 to provide environmental management systems certification to Unit 6, Gordano Court Gordano Gate Business Park Serbert Close
GRU Purchasing Material Group Codes
Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals
Map of Industry Classification Benchmark (ICB) to proposed GRI Business Activity Groups
Additional information about the project can be found at https://www.globalreporting.org/reporting/sector-guidance/topics-research/pages/default.aspx Map of Industry Classification Benchmark (ICB) to proposed
PLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
Depreciation Rate Chart as per Part "C" of Schedule II of The Companies Act 2013
I Buildings [NESD] (a) Building (other than factory buildings) RCC Frame 60 Years 1.58% 4.87% Structure (b) Building (other than factory buildings) other than RCC Frame Structure (c) Factory buildings
INDUTAINER COLLAPSIBLE IBCs FOR LIQUIDS
INDUTAINER COLLAPSIBLE IBCs FOR LIQUIDS INDUTAINER IBCs for paste-like and liquid products collapsible container system combines the advantages of RIBC and FIBC optimal load utilization of truck and ISO
INSTALLATION AND START UP REPORT CERTIFYING THE CORRECT FUNCTIONALITY OF THE AD HOC REFUELLING STATION LIFE+ MHYBUS LIFE 07-ENV/IT/000434
Feb. 15, 212 Sheet: 1 of 27 INSTALLATION AND START UP REPORT CERTIFYING THE CORRECT FUNCTIONALITY OF THE AD HOC REFUELLING STATION Ref. Number: LIFE+ MHYBUS LIFE 7-ENV/IT/434 Project Acronym: MHYBUS Project
Enclosures 1-866-338-0988. DuraSystems Barriers, Inc. www.durasystems.com Email: sales@durasystems.com. The Passive Fire Protection Specialists
Enclosures Sturdy single and double wall fire protection construction Impact resistant Fast & easy installation Pre-manufactured and modular Available in galvanized, stainless steel & other specialty metals
Ultrasonic Reference Blocks
Ultrasonic Reference Blocks Custom and Standard Test Blocks for Nondestructive Testing Introduction 3 IIW Type 1 Calibration Block 4 Miniature Angle Beam (ROMPAS) Calibration Block 4 Distance Calibration
Eddy-current testing - Non-destructive testing for flaw detection of metals, coatings and carbon fibres
Technology Offer Eddy-current testing - Non-destructive testing for flaw detection of metals, coatings and carbon fibres Summary A German SME offers the development of task specific eddy-current based
INDUSTRIA TRASFORMAZIONE RESINE
INDUSTRIA TRASFORMAZIONE RESINE / Rev.07_EN 1 COMPANY I.T.R. S.r.l. designs, develops and manufactures complex parts and systems. According to its consolidated strategy, I.T.R. has invested in the highest
Pressure vessel basics for all engineers
Pressure vessel basics for all engineers by Sharjeel Aslam Faiz 1. Contents 2. Preliminary Design... 3 3. Loads... 3 4. Detailed design... 3 5. Information in-flow to a fabrication drawing... 4 6. Information
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
Annex of the certificate (Page 1/2) Accreditation Scope
Annex of the certificate (Page 1/2) ISO 9001:2008 Quality Management System Certification Plaza Yukarı Dudullu * EA Code Description 1 Agriculture, forestry and fishing 2 Mining and quarrying 3 Food products,beverages
Solid shape molding is not desired in injection molding due to following reasons.
PLASTICS PART DESIGN and MOULDABILITY Injection molding is popular manufacturing method because of its high-speed production capability. Performance of plastics part is limited by its properties which
SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
EUROPEAN STANDARDS PERSONAL PROTECTIVE CLOTHING FOR FLAME RESISTANT. Alexander Gstettner, Lenzing AG Austria
EUROPEAN STANDARDS FOR FLAME RESISTANT PERSONAL PROTECTIVE CLOTHING Alexander Gstettner, Lenzing AG Austria W a t e r How are the standards organized? A 1 Testing Methods Standards specifiying performance
COMMERCIAL COOKING HOODS, VENTILATION & FIRE SUPPRESSION SYSTEM GUIDELINES AND PROCEDURES
COMMERCIAL COOKING HOODS, VENTILATION & FIRE SUPPRESSION SYSTEM GUIDELINES AND PROCEDURES These guidelines are to be used for ALL commercial cooking hoods, ventilation systems and related fire suppression
OR Technology. Non Destructive Testing (RT) Strong Workmate for
OR Technology Strong Workmate for Non Destructive Testing (RT) Who We Are What We Do OR Technology Digital X-ray and Imaging Solutions producing digital X-ray technology and developing image management
Revised April (May) 2015
Section 19.0 Cross Connection Control Policy 19.1 Responsibility 19.1.1 The Elkhart Water Utility has the responsibility to supply safe, potable water from the source to the point of delivery defined as
RPV - RP - RA air handling units
APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP
Welding Codes and How They're Used (DOD) (ANSI). (AWS), (ASME) (API). not American Welding Society AWS D1.1 AWS D1.2 AWS D1.3 AWS D1.4 AWS D1.
Welding Codes and How They're Used Almost all design, welding, fabrication, material, repair, testing, and inspection requirements are covered under three main governing organizations. Even the Department
1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
Policy on Scoping Quality/Environmental Management Systems Certification Bodies
Policy on Scoping Quality/Environmental Management Systems Certification Bodies Purpose: The purpose of this policy is to ensure that the International Accreditation Service (IAS) applicants and accredited
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
FORGING THE FUTURE NOW
FORGING THE FUTURE NOW The origin of the metallurgical industry in Terni dates back to 1884, closely linked to the spread of steel making on an industrial scale in Italy. This large metallurgical plant,
mobile pipeline Bulk transportation and storage of energy gases
mobile pipeline Bulk transportation and storage of energy gases 1 An advanced pipeline to supply energy gases over long distances at competitive costs capacity matters Your mobile pipeline In 2006, Hexagon
Giornata del Metano per i Trasporti. Applicazione per il Trasporto Pesante
per i Trasporti Applicazione per il Trasporto Pesante 20 Novembre, 2010 Table of Contents Foreword Rationale Technical Facts Pilot Test Conclusions 2 Foreword AN INTEGRATED APPROACH TO MOBILITY FOR TOMORROW
Luxor. Automatic retractable bollard
Luxor Automatic retractable bollard Manage, control and restrict Modern urban planning requires advanced systems able to regulate both public and private vehicular flows. Urbaco, has always been in tune
Foam Recycling is Viable. A Profitable Industry in the Making
INTOUCH is a regular publication of the Polyurethane Foam Association. It covers topics of interest to users of flexible polyurethane foam and is designed as a quick reference e for background information
Non- Carbon Fiber Electrical Heating Textile Introduction:
Non- Carbon Fiber Electrical Heating Introduction: This Heating is a new generation electrical heating system which is specially designed for mobile heating, energy saving and safety orientated requirements
Rules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 4 Test Requirements for Sealing Systems of Bulkhead and Deck Penetrations
T A B L E T 1 T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A
T A B L E T 1 1 of 7 Tests & Inspection Cable PCUT & PCUT-A (Table T1) T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A No. Test Scale MOC Requirements G 20:10:001:01 Defined Test
GENERAL SHIELDING REQUIREMENTS FOR DIAGNOSTIC X-RAY FACILITIES. Major Medical (Radio/Fluoro/CT/Cardiac/Chiropractic)
GENERAL SHIELDING REQUIREMENTS FOR DIAGNOSTIC X-RAY FACILITIES 1. PROTECTIVE SCREENS (a) Major Medical (Radio/Fluoro/CT/Cardiac/Chiropractic) Typically, 15 kg m -2 (1.3 mm) sheet lead or its shielding
Annex of the certificate (Page 1/6) Accreditation Scope
As a Testing Laboratory Annex of the certificate (Page 1/6) Accreditation Scope Address: Küçük Çiğli Mh. 8780/1 Sk. No:5 Çiğli 35681 İZMİR / TÜRKİYE Phone : 0 232 376 24 25 Fax : 0 232 386 33 98 E-Mail
A. Air-Conditioning and Refrigeration Institute: 1. ARI 850 - Commercial and Industrial Air Filter Equipment.
SECTION 23 40 00 - HVAC AIR CLEANING DEVICES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Activated carbon filters. 2. Extended surface rigid air filter with synthetic media. 3. Disposable panel
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
Commercial Electric Water Heater
MODEL SE Commercial Electric Water Heater 6-120 Gallon Capacity, up to 58 KW in all Three Phase Voltages, Over 6 KW in all Single Phase Voltages Features Heavy Duty Construction Hydrastone cement lining
07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
1 ELGOTEAM ADVANCED SECURITY SYSTEMS Bi-directional spike barrier. Bi-directional spike barrier Customer Information packet
1 Customer Information packet For more information: info@elgoteam.com www.elgoteam.com 2 Chapter contents Subject Page number The company 3 Background 4 Applications 5 Advantages 6 Operating positions
CLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
Compressed Gas Cylinder Storage and Handling Guide
Overview Compressed gas cylinders are used in many workplaces to store gases that vary from extremely flammable (acetylene) to extremely inert (helium). Many compressed gas cylinders are stored at extremely
Secondary Containment Comparison ATI Ultra COAT vs HDPE
When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,
Rules for Classification and Construction Additional Rules and Guidelines 3 Machinery Installations
VI Rules for Classification and Construction Additional Rules and Guidelines 3 Machinery Installations 5 Guidelines for Design, Equipment and Testing of Gas Welding Installations on Seagoing Ships Edition
Alternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
Light Duty Commercial Electric Water Heater
Features Heavy Duty Construction Hydrastone cement lining provides longer tank life Copper-silicon tappings cannot rust or corrode High impact composite jacket eliminates damage during installation and
Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system
AURETU004 Application Competency Field Unit Sector Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system 2. Diagnose air conditioning and
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
STARLINE RBS COMBINED KNIFE/ROLLER COATING HEAD
STARLINE RBS COMBINED KNIFE/ROLLER COATING HEAD 1 STARLINE RBS COMBINED COATING MACHINE FOR FINISHING & COATING The new Starline RBS is a multi-functional coating head offering, on the same station, any
Introduction to Standards and Nondestructive Testing of Industrial Materials
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. KEY CONCEPTS 17 Introduction to Standards and Nondestructive Testing of Industrial Materials
British standards (BS) & codes related to steel construction
Maryland Metrics Technical Data Chart British standards (BS) & codes related to steel construction Structural steel BS 970 : specification for wrought steels for mechanical and allied engineering purposes
Standards and projects under the direct responsibility of TC 44 Secretariat
Standards and projects under the direct responsibility of TC 44 Secretariat ISO 3677:1992 Filler metal for soft soldering, brazing and braze welding -- Designation ISO 5187:1985 Welding and allied processes
RODADEACO. Diesel Engine Air Intake Shutoff Valves. Model RDS1 Swing Gate Valve. by AMOT. Overview. Typical Applications. Key Features and Benefits
Diesel Engine Air Intake Shutoff Valves Model RDS1 Swing Gate Valve Overview If flammable gas or vapor is present in the atmosphere surrounding a diesel engine, it can be ingested into the engine and become
I-Line - Snap-On Feature
Oct 2012 I-Line - Snap-On Feature DATA SHEET Snap-On features - Guaranteed truelines every time Bailey I-Line Snap-On is an architectural cladding feature offering creative possibilities for architects
LOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and
Foam Injection Molding:
Foam Injection Molding: Unique Process Solutions for Light Weighting Automotive Plastic Parts Steve Braig President & CEO Trexel, Inc. AGENDA Technology Overview > Chemical Foaming > Physical Foaming Foamed
LIST OF ECONOMIC ACTIVITIES
HUNGARIAN POPULATION CENSUS 2001 LIST OF ECONOMIC ACTIVITIES (CODING MANUAL) AGRICULTURE, HUNTING, FORESTRY 01 Agriculture, hunting 011 Growing of crops; market gardening; horticulture 012 Farming of animals
ASME Packaged Indirect Fired Water Heater
Utilizes Or HTHW To Heat Domestic Water, Semi-Instantaneous or Storage Type Model BW Features Reliable Only high grade materials used in construction to ensure long operating life Hydrastone cement lining
Aerospace and Defence
Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems World Class Filtration Solutions Porvair Filtration Group Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems Porvair Filtration
Master Catalogue I August 2011
Master Catalogue I August 2011 Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems 58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile
CLASSIFICATION SYSTEM BY FIELD AND SUB-FIELD OF EXPERTISE SUPPLIERS REGISTRY OF GOODS AND SERVICES ENAP GROUP OF COMPANIES I. Suppliers are classified in three groups: Classification Equipments, materials
Automatic Back-Flushing Filter AutoFilt RF9.
Automatic Back-Flushing Filter AutoFilt RF9. AutoFilt RF9 Clearing the Way. The Challenge: In response to the Tier III standard which will come into effect in 2016, the International Maritime Organization
EN-painelaitestandardien tilannekatsaus
1 (9) EN-painelaitestandardien tilannekatsaus Teknisten komiteoiden CEN/TC 54, 74, 267, 268, 269 ja 342 julkaisut ja työkohteet. Keltaisella on merkitty viime tilannekatsaukseen nähden muuttuneet tiedot.
FAIRBANKS NIJHUIS FIRE PUMPS. www.fairbanksnijhuis.com
FAIRBANKS NIJHUIS FIRE PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS Long established as a leading fire pump manufacturer, Fairbanks Nijhuis offers a broad range of horizontal and vertical split case,
Table of Contents PART 1 WINDOW SELECTION GUIDE. Window and Door Selection Guide
VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows
Appendix B - Schedule of Permitted Economic Activities (Standard Industrial Classifications)
Appendix A London Road North Local Development Order Boundary Map LDO Boundary Extent N Scale 1 : 2500 @ A0 Crown copyright.harlow District Council Licence No.100019627 (2010) Appendix B - Schedule of
2010 Residential Water Heater Replacement Check List
2010 Residential Water Heater Replacement Check List The intent of this check list is to provide installers a general reference for the enforcement of code requirements in the Greater San Diego Area. This
Static Electricity. A Health and Safety Guideline for Your Workplace. What Are Some Sources of Static Electricity? What is Static Electricity?
A Health and Safety Guideline for Your Workplace What is static electricity? What causes it? How is it hazardous? And, most importantly, how can it be controlled? All of these questions will be answered
Compatible Uses in APZ-1 as of July 1, 2007
MANUFACTURING Sawmills 321113 Lumber and wood products (except furniture); Lumber, parallel strand, 321213 Lumber and wood products (except furniture); All Other Miscellaneous Wood Product Manufacturing
GUJARAT TECHNOLOGICAL UNIVERSITY
Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 24-05-2013 10:30 To 01:00 160102 Fundamentals of Jet Propulsion 27-05-2013 10:30 To 01:00 160103 Vibration
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
Applicable standards in CR Rolling stock - Freight wagons TSI (2006/861/EC)
Applicable standards in CR Rolling stock - Freight wagons TSI (2006/861/EC) Click here to enter text. ERA 1.0 Page 1/13 Standards or other documents referred to in the rolling stock- freight wagons TSI