Table of Contents PART 1 WINDOW SELECTION GUIDE. Window and Door Selection Guide

Size: px
Start display at page:

Download "Table of Contents PART 1 WINDOW SELECTION GUIDE. Window and Door Selection Guide"

Transcription

1 VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors 101/I.S Voluntary Performance Specification for Windows, Skylights and Glass Doors Standard/Specification for Windows, Doors, and Unit Skylights North American Fenestration Standard/Specification for windows, doors, and skylights North American Fenestration Standard/Specification for windows, doors, and skylights User Guide to NAFS /I.S. 2/NAFS /I.S. 2/A /I.S. 2/A /I.S. 2/A IS2-A UG Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior Profiles Voluntary Specification for Acrylonitrile-Butadiene-Styrene (ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends Voluntary Specification for Fiber Reinforced Thermoset Profiles Voluntary Specification for Laminates Intended for Use on AAMA Certified Profiles Voluntary Specification for Cellular Polyvinyl Chloride (PVC) Exterior Profiles Standard Specification for Classification of Rigid Thermoplastic/Cellulosic Composite Materials Voluntary Specifications for Reinforced Thermoplastic Fenestration Exterior Profile Extrusions Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles Voluntary Specification for Molded Aliphatic Polyurethane Elastomer Frame Materials General Guidelines for Troubleshooting Welded Thermoplastic Corners Voluntary Performance Rating Method for Mulled Fenestration Assemblies Voluntary Laboratory Test Method to Qualify Fenestration Installation Procedures Dry Shrinkage and Composite Performance Thermal Cycling Test Procedure Voluntary Specifications for Impact and Cycle Testing of Fenestration Products Standard Practice for Determining the Thermal Performance Characteristics of Fenestration Systems Installed in Commercial Buildings Voluntary Guide Specification for Blast Hazard Mitigation for Fenestration Systems Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware Voluntary Life Cycle Specifications and Test Methods for AW Class Architectural Windows and Doors Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM) Specification for Operating Cycle Performance of Side-Hinged Exterior Door Systems Specification for Determining the Vertical Loading Resistance of Side-Hinged Door Leaves Voluntary Specification for Secondary Storm Products for Windows and Sliding Glass Doors Voluntary Specification for Side-Hinged Secondary Storm Doors

2 Voluntary Specifications for Forced-Entry Resistant Aluminum Prime Windows Voluntary Specifications for Forced-Entry Resistant Aluminum Sliding Glass Doors Voluntary Specification for Forced Entry Resistance of Side-Hinged Door Systems Voluntary Standard for Thermal Performance of Windows, Doors and Glazed Wall Sections Voluntary Test Methods for Thermal Performance of Fenestration Products with Multiple Glazing Options Voluntary Test Method for Laboratory Heat Build-Up Effects on Fenestration Products Voluntary Specifications for Residential Translucent Sloped Glazing Systems Specifications for Sunrooms (AAMA/NPEA/NSA) Voluntary Guideline for Engineering Analysis of Window and Sliding Glass Door Anchorage Systems Comparative Analysis Procedure for Window and Door Products Quality Assurance Processing & Monitoring Guide for Poured and Debridged Polyurethane Thermal Barriers Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers Fenestration Anchorage Guidelines QAG-1-09 QAG-2-12 TIR-A14-10 PART 3 - THERMAL AND ACOUSTICAL PERFORMANCE AND TESTS Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections Voluntary Specification for the Acoustical Rating of Windows, Doors, Skylights and Glazed Wall Sections PART 4 - FIELD TESTING METHODS Voluntary Specification for Field Testing of Newly Installed Fenestration Products Voluntary Guideline for Forensic Water Penetration Testing of Fenestration Products Voluntary Specifications for Tornado Hazard Mitigating Fenestration Products PART 5 - COATINGS AND FINISHES SPECIFICATIONS Cleaning and Maintenance Guide for Architecturally Finished Aluminum 609 & Voluntary Specification for Anodized Architectural Aluminum Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum Voluntary Performance Requirements and Test Procedures for Organic Coatings on Plastic Profiles Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Plastic Profiles Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Plastic Profiles Voluntary Specifications for High Performance Organic Coatings on Coil Coated Architectural Hot Dipped Galvanized (HDG) and Zinc-Aluminum Coated Steel Substrates Voluntary Specification, Performance Requirements and Test Procedures for Organic Coatings on Fiber Reinforced Thermoset Profiles Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Fiber Reinforced Thermoset Profiles Voluntary Specification, Performance Requirements and Test Procedures for Superior Performance Organic Coatings on Fiber Reinforced Thermoset Profiles

3 Voluntary Specification, Performance Requirements and Test Procedures for Exterior Stain Finishes on Wood, Cellulosic Composites and Fiber Reinforced Thermoset Window and Door Components Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes Voluntary Performance Requirements and Test Procedures for Organic Coatings on Wood and Cellulosic Composite Substrates Voluntary Specification for In-Process Quality Control Requirements for Applicators of Organic Coatings to Polyvinyl Chloride (PVC) Exterior Profiles Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels PART 6 - HARDWARE, WEATHERSTRIP AND SEALANT SPECIFICATIONS Voluntary Specifications for Pile Weatherstriping & Replaceable Fenestration Weatherseals 701/ Voluntary Specifications for Non-Integral Door Bottom Weatherseals Voluntary Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products Voluntary Specification for Mechanically Attached Flexible Flashing Voluntary Test Method to Determine Chemical Compatibility of Sealants and Self-Adhered Flexible Flashings Voluntary Specification for Liquid Applied Flashing Used to Create a Water-Resistive Seal around Exterior Wall Openings in Buildings Voluntary Specifications and Test Methods for Sealants Voluntary Practice for Assessment of Single Component Aerosol Expanding Polyurethane Foams for Sealing Rough Openings of Fenestration Installations (2010) Voluntary Specification and Test Methods for Adhesives Used in Simulated Divided Lites Fenestration Sealants Guide for Windows, Window Walls and Curtain Walls Voluntary Specification for Rotary & Linear Operators in Window Applications Voluntary Specification for Sash Balances Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side- Hinged Doors Voluntary Specification for Multi-Bar Hinges In Window Applications Voluntary Specification for Sliding Door and Lift and Slide Roller Assemblies Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components Voluntary Specification for Friction Based Sash Balances Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware Voluntary Specification for the Water Penetration Resistance and Structural Load Performance of Locking/Latching Hardware Used in Side-Hinged Door Systems Airflow Through Integral Ventilating Systems/Devices TIR A12-09

4 VOLUME 2 - METAL CURTAIN WALLS PART 1 METAL CURTAIN WALL MANUAL Metal Curtain Wall Manual MCWM-1-89 PART 2 TESTING Methods of Test for Exterior Walls Standard Test Method for Water Penetration of Windows, Curtain Walls and Doors Using Dynamic Pressure Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drifts and Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System & Test Method for Thermal Cycling of Exterior Walls Recommended Static Test Method for Evaluating Windows, Window Wall, Curtain Wall and Storefront Systems Subjected to Vertical Inter-Story Movements Standard Test Method for Determination of Resistance to Human Impact of Window Systems Intended for Use in Psychiatric Applications Voluntary Specification for Field Testing of Newly Installed Metal Storefronts, Curtain Walls and Sloped Glazing Systems (2014) PART 3 ALUMINUM CURTAIN WALL DESIGN GUIDES Voluntary Test Method and Specification for Pressure Equalized Rain Screen Wall Cladding Systems (2014) Care and Handling of Architectural Aluminum from Shop to Site Design Wind Loads for Buildings and Boundary Layer Wind Tunnel Testing Structural Properties of Glass Structural Sealant Glazing Systems Aluminum Curtain Wall Design Guide Manual (Editorial Revision 5/05) The Rain Screen Principle and Pressure Equalized Wall Design Installation of Aluminum Curtain Walls Fire Safety in High-Rise Curtain Walls Glass and Glazing CW CW CW CW CW-DG-1-96 CW-RS-1-12 CWG-1-89 FSCOM-1-09 GAG-1-97 PART 4 TECHNICAL INFORMATION REPORTS Sound Control for Fenestration Products TIR A1-15 Structural Performance of Composite Thermal Barrier Framing Systems TIR A8-08 Design Guide for Metal Cladding Fasteners TIR A9-91 Maximum Allowable Deflection of Framing Systems for Building Cladding Components at Design Wind Loads TIR A11-15

5 VOLUME 3 - ALUMINUM STOREFRONT & ENTRANCE ALUMINUM STOREFRONT AND ENTRANCE MANUAL SFM-1-14 Section 1 - Terminology Part 1 Section 2 - Design Part 2 Section 3 - Hardware Part 3 Section 4 - Engineering Part 4 Section 5 - Specifications Part 5 Section 6 - References Part 6

6 VOLUME 4 - SKYLIGHT AND SPACE ENCLOSURES PART 1 - PERFORMANCE STANDARDS Voluntary Specification for Skylights (AAMA/WDMA) 1600/I.S PART 2 - DESIGN GUIDES Installation Guidelines for Unit Skylights Daylighting Design Guidelines for Roof Glazing in Atrium Spaces DDGA-89 Glass Design for Sloped Glazing GDSG-1-87 Structural Design Guidelines for Aluminum Framed Skylights SDGS-1-89 Skylight Handbook Design Guidelines SHDG-1-88 Two-Sided Structural Glazing Guidelines for Aluminum Framed Skylights TSGG-04 PART 3 - TECHNICAL INFORMATION REPORTS Sloped Glazing Guidelines TIR A7-11