PROGETTI DI NORMA ISO IN INCHIESTA
|
|
|
- Brent Maxwell
- 8 years ago
- Views:
Transcription
1 PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 9 di UNInotizie del 15 maggio 2012 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio Diffusione: fax diffusione@uni.com Period from 01 April to 30 April 2012 * Available in English only Acoustics ISO/DIS * Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (Revision of ISO 140-4:1998, ISO 140-5:1998, ISO 140-7:1998, ISO :2004) Data di scadenza: Aircraft and space vehicles ISO/DIS 10788* Space systems Lunar simulants ISO/DIS Space systems Prevention of break-up of unmanned spacecraft Data di scadenza: Air quality ISO/DIS 25597* Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution Data di scadenza: ISO/DIS 13137* Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods Data di scadenza: Anaesthetic and respiratory equipment ISO/DIS * Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets (Revision of ISO :2004) 1
2 ISO/DIS 27427* Anaesthetic and respiratory equipment Nebulizing systems and components (Revision of ISO 27427:2010) ISO/DIS 16571* Systems for evacuation of plume generated by medical devices Data di scadenza: Automation systems and integration ISO/DIS 16739* Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries (Revision of ISO/PAS 16739:2005) Data di scadenza: Dentistry ISO/DIS Dentistry Dental dam technique Part 1: Hole punch Data di scadenza: ISO/DIS 16498* Dentistry Minimal dental implant data set for clinical use Elevating work platforms ISO/DIS 18878* Mobile elevating work platforms Operator (driver) training (Revision of ISO 18878:2004) Essential oils ISO/DIS 9235* Aromatic natural raw materials Vocabulary (Revision of ISO 9235:1997) Data di scadenza: Fine ceramics ISO/DIS 14605* Fine Ceramics (Advanced ceramics, advanced technical ceramics) Light source for testing semiconducting photocatalytic materials used under indoor lighting environment Data di scadenza: Floor coverings ISO/DIS 17984* Machine-made textile floor coverings Determination of dimensional changes after exposure to heat and/or water (Revision of ISO/PAS 17984:2001) Data di scadenza: Fluid power systems ISO/DIS * Connections for general use and fluid power Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports (Revision of ISO :2007) ISO/DIS * Connections for general use and fluid power Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (Revision of ISO :2007, ISO :2007/ DAmd 1) 2
3 Food products ISO 21570:2005/DAmd 1* Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods Amendment 1 Data di scadenza: Gas cylinders ISO/DIS 3807* Gas cylinders Acetylene cylinders Basic requirements and type testing (Revision of ISO :2000, ISO :2000, ISO/NP , ISO/NP ) ISO :2001/DAmd 1* Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification Amendment 1 Graphical symbols ISO 7001:2007/DAmd 1* Graphical symbols Public information symbols Amendment 1: Symbol PI CF 011: Internet café ISO 7001:2007/DAmd 4* Graphical symbols Public information symbols Amendment 4: Symbol PI PF 036: Child health care centre ISO 7001:2007/DAmd 5* Graphical symbols Public information symbols Amendment 5: Symbol PI PF 037: Library ISO 7001:2007/DAmd 6* Graphical symbols Public information symbols Amendment 6: Symbol PI PF 038: Indoor play area ISO 7001:2007/DAmd 7* Graphical symbols Public information symbols Amendment 7: Symbol PI PF 039: Packed lunch room ISO 7001:2007/DAmd 10* Graphical symbols Public information symbols Amendment 10: Symbol PI PF 043: Dentist ISO 7001:2007/DAmd 11* Graphical symbols Public information symbols Amendment 11: Symbol PI PF 044: Health care centre or doctor ISO 7001:2007/DAmd 12* Graphical symbols Public information symbols Amendment 12: Symbol PI PF 045: Accessibility, limited walking capability ISO 7001:2007/DAmd 13* Graphical symbols Public information symbols Amendment 13: Symbol PI PF 046: Accessibility, assistance dog ISO 7001:2007/DAmd 14* Graphical symbols Public information symbols Amendment 14: Symbol PI PF 047: Accessibility, personal assistant available 3
4 ISO 7001:2007/DAmd 15* Graphical symbols Public information symbols Amendment 15: Symbol PI PF 048: Accessibility, hard of hearing ISO 7001:2007/DAmd 16* Graphical symbols Public information symbols Amendment 16: Symbol PI PF 049: Accessibility, vision impaired ISO 7001:2007/DAmd 17* Graphical symbols Public information symbols Amendment 17: Symbol PI PF 050: Vegetarian food ISO 7001:2007/DAmd 18* Graphical symbols Public information symbols Amendment 18: Symbol PI PF 051: Accessibility, blind or low vision ISO 7001:2007/DAmd 20* Graphical symbols Public information symbols Amendment 20: Symbol PI PF 053: Transportation centre ISO 7001:2007/DAmd 21* Graphical symbols Public information symbols Amendment 21: Symbol PI PF 054: Museum ISO 7001:2007/DAmd 22* Graphical symbols Public information symbols Amendment 22: Symbol PI SA 003: Indoor swimming pool ISO 7001:2007/DAmd 23* Graphical symbols Public information symbols Amendment 23: Symbol PI SA 004: Sports hall ISO 7001:2007/DAmd 24* Graphical symbols Public information symbols Amendment 24: Symbol PI TC 008: Natural area with public access ISO 7001:2007/DAmd 25* Graphical symbols Public information symbols Amendment 25: Symbol PI TC 009: Hiking trail ISO 7001:2007/DAmd 26* Graphical symbols Public information symbols Amendment 26: Symbol PI TF 022: Priority seats for elderly people ISO 7001:2007/DAmd 27* Graphical symbols Public information symbols Amendment 27: Symbol PI TF 023: Priority seats for injured people ISO 7001:2007/DAmd 28* Graphical symbols Public information symbols Amendment 28: Symbol PI TF 024: Priority seats for people with internal medical conditions ISO 7001:2007/DAmd 29* Graphical symbols Public information symbols Amendment 29: Symbol PI TF 025: Priority seats for people with small children 4
5 ISO 7001:2007/DAmd 30* Graphical symbols Public information symbols Amendment 30: Symbol PI TF 026: Priority seats for expecting mothers ISO 7001:2007/DAmd 31* Graphical symbols Public information symbols Amendment 31: Symbol PI PF 055: Priority access for elderly people ISO 7001:2007/DAmd 32* Graphical symbols Public information symbols Amendment 32: Symbol PI PF 056: Priority access for injured people ISO 7001:2007/DAmd 33* Graphical symbols Public information symbols Amendment 33: Symbol PI PF 057: Priority access for people with internal medical conditions ISO 7001:2007/DAmd 34* Graphical symbols Public information symbols Amendment 34: Symbol PI PF 058: Priority access for people with small children ISO 7001:2007/DAmd 35* Graphical symbols Public information symbols Amendment 35: Symbol PI PF 059: Priority access for expecting mothers ISO 7001:2007/DAmd 36* Graphical symbols Public information symbols Amendment 36: Symbol PI PB 006: Dogs should be carried ISO 7001:2007/DAmd 37* Graphical symbols Public information symbols Amendment 37: Symbol PI CF 014: Newsstand/News kiosk/newsagent ISO 7001:2007/DAmd 40* Graphical symbols Public information symbols Amendment 40: Symbol PI TC 010: Location for campfires ISO 7001:2007/DAmd 41* Graphical symbols Public information symbols Amendment 41: Symbol PI TC 011: Bird sanctuary ISO 7001:2007/DAmd 42* Graphical symbols Public information symbols Amendment 42: Symbol PI TC 012: Wetland reserve ISO 7001:2007/DAmd 43* Graphical symbols Public information symbols Amendment 43: Symbol PI TC 013: Hot spring or hot tub ISO 7001:2007/DAmd 44* Graphical symbols Public information symbols Amendment 44: Symbol PI TC 014: Audio tour 5
6 ISO 7001:2007/DAmd 45* Graphical symbols Public information symbols Amendment 45: Symbol PI TF 027: Airport bus ISO 7001:2007/DAmd 46* Graphical symbols Public information symbols Amendment 46: Symbol PI PF 062: Communication in the specified language ISO 7001:2007/DAmd 47* Graphical symbols Public information symbols Amendment 47: Symbol PI PF 063: Recycling Aluminium cans ISO 7001:2007/DAmd 48* Graphical symbols Public information symbols Amendment 48: Symbol PI PF 064: Recycling Magnetic type of steel ISO 7001:2007/DAmd 49* Graphical symbols Public information symbols Amendment 49: Symbol PI PF 065: Recycling Glass ISO 7001:2007/DAmd 50* Graphical symbols Public information symbols Amendment 50: Symbol PI PF 066: Recycling ISO 7001:2007/DAmd 51* Graphical symbols Public information symbols Amendment 51: Symbol PI PB 007: Take off your shoes Health informatics ISO/HL7 DIS 10781* Electronic Health Record-System Functional Model, Release 2.0 (EHR FM) (Revision of ISO/HL :2009) Data di scadenza:
PROGETTI DI NORMA ISO IN INCHIESTA
PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 4 di UNInotizie del 28 febbraio 2013 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio
PROGETTI DI NORMA ISO IN INCHIESTA
PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 17 di UNInotizie del 30 settembre 2012 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio
PROGETTI DI NORMA IN INCHIESTA
PROGETTI DI NORMA IN INCHIESTA Allegato al n. 2 di UNInotizie del 31 gennaio 2011 I progetti di norma UNI (puramente nazionali, ovvero non recepimenti di norme EN o adozioni di norme ISO) sottoposti alla
PROGETTI DI NORMA IN INCHIESTA
PROGETTI DI NORMA IN INCHIESTA Allegato al n. 7 di UNInotizie del 15 aprile 2009 I progetti di norma UNI (puramente nazionali, ovvero non recepimenti di norme EN o adozioni di norme ISO) sottoposti alla
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
IMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will minimize your risk of injury. ITT Goulds
Types of Engineering Jobs
What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will
Air Conditioning. Air Conditioning. Spare parts manufacture OEM service
Air Conditioning Air Conditioning Spare parts manufacture OEM service Comprehensive service for refrigeration and air conditioning technology HANSA-FLEX supports manufacturers, suppliers and service providers
Contents. 1 Introduction of RIAMB and SAC/TC159. 2 Automation System Integration Framework
Standardization for Automation System Integration SAC/TC159 Contents 1 Introduction of RIAMB and SAC/TC159 2 Automation System Integration Framework 3 Standards in the Area Contents 1 Introduction of RIAMB
Siemens Gebze Location FIRST GREEN BUILDING IN TURKEY CERTIFICIED AS LEED GOLD
FIRST GREEN BUILDING IN TURKEY CERTIFICIED AS LEED GOLD Slide 1 Energy Efficiency Workshop with KFW & TSKB Sep 28th, 2010 The LEED Green Building Rating System is a voluntary standard that defines high
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
WARRANTY BOOKLET. Commercial Water Heaters. Register online at www.rinnai.com.au
WARRANTY BOOKLET Commercial Water Heaters Register online at www.rinnai.com.au Rinnai Commercial Water Heating Products Warranty Warranty Terms The benefits to the consumer given by this warranty are
Method 202 Dry Impinger Method for Determining Condensable Particulate Emissions from Stationary Sources. By: Paul Ottenstein
Air Quality Issues in the Rocky Mountain Region PM2.5 Source Testing Method 201A Determination PM 10 and PM 2.5 Emissions from Stationary Sources (Constant Sampling Rate Procedure) Method 202 Dry Impinger
Ref.nr.: www.hydroflex.nl. Oud-Beijerland Willem Beukelszstraat 1 3261 LV Oud-Beijerland Nederland Telefoon: +31(0)186 620 777
Ref.nr.: Oud-eijerland Willem eukelszstraat 1 3261 LV Oud-eijerland elefoon: +31(0)186 620 777 russel 1853 Strombeek - ever elgië elefoon: +32(0)2 267 41 14 elefoon: +31(0)10 283 90 00 Ordering s ypical
Respiratory Safety and PPE Module 7. Special Warehouse Worker Hazards in Structural Steel Fabricating and Supply Companies
Respiratory Safety and PPE Special Warehouse Worker Hazards in Structural Steel Fabricating and Supply Companies Drawing from OSHA 3384-09 2011 1 Respiratory Safety and PPE OSHA Grant Information This
Subject Erasmus Description Subject codes Isced Code Subject ISCED Description
Subject Erasmus Description Subject codes Isced Code Subject ISCED Description Agricultural Sciences 01.0 62 Agriculture, forestry and fishery Agriculture 01.1 620 Agriculture, forestry and fishery (broad
Equivalente ISCED. Ex Aree disciplinari ERASMUS. Descrizione aree disciplinari ERASMUS. Descrizione ISCED97
Ex Aree disciplinari Descrizione 97 01.0 Agricultural Sciences 62 Agriculture, forestry and fishery 01.1 Agriculture 620 Agriculture, forestry and fishery (broad programmes) 01.2 Agricultural Economics
Physics 101 Hour Exam 3 December 1, 2014
Physics 101 Hour Exam 3 December 1, 2014 Last Name: First Name ID Discussion Section: Discussion TA Name: Instructions Turn off your cell phone and put it away. Calculators cannot be shared. Please keep
Placement Offer Form 1, Makri & Dionysiou Aeropagitou Str., 117 42 Athens e-mail: erasmus@iky.gr Ph.: +30 210 3726351/ Fax: +30 210 3221863
EMPLOYER INFORMATION Placement Offer Form 1, Makri & Dionysiou Aeropagitou Str., 117 42 Athens e-mail: erasmus@iky.gr Ph.: +30 210 3726351/ Fax: +30 210 3221863 Name of Organization Address Games2Gaze,
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
HOUSING QUALITY STANDARDS (HQS)
HOUSING QUALITY STANDARDS (HQS) HQS INSPECTIONS Part II Site Inspections 24 CFR 982.401 & 405 1si Rev. 4-20-06 General Conditions All doors and windows accessible to the outside, must have a workable lock.
4850-01 BRAKE SYSTEM OVERVIEW AND OPERATION PROCESS 1. BRAKE SYSTEM GENERAL INFORMATION 1) DESCRIPTION AND OPERATION 16-3.
16-3 OVERVIEW AND OPERATION PROCESS 1. GENERAL INFORMATION 1) DESCRIPTION AND OPERATION (1) Brake System Even though a driver cuts off the power, while driving, the vehicle continues to move due to the
Emergency Response Plan
Emergency Response Plan Branch: Location: Date completed: Signed: Emergency Operations Coordinator (EOC) The emergency operations coordinator (EOC) is the person who serves as the main contact person for
SUBCHAPTER 2D - AIR POLLUTION CONTROL REQUIREMENTS SECTION 2D.0100 - DEFINITIONS AND REFERENCES
2D1-1 SUBCHAPTER 2D - AIR POLLUTION CONTROL REQUIREMENTS SECTION 2D.0100 - DEFINITIONS AND REFERENCES.0101 DEFINITIONS The definition of any word or phrase used in Regulations of this Subchapter is the
Elements Elements describe the essential outcomes.
AURETU005 Application Competency Field Unit Sector Elements Elements describe the essential outcomes. Retrofit and modify air conditioning and HVAC systems This unit describes the performance outcomes
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
Sample New Employee Safety Checklist
Sample New Employee Safety Checklist Supervisors must review the appropriate items from this list with each new employee. The Washington State Industrial Health and Safety Act (WAC 296-24-040) requires
DuPont Automotive Performance Materials to Help Electrify Vehicles
DuPont Automotive Performance Materials to Help Electrify Vehicles Hitoshi Shioya Paul J Kane Segment Leader - Asia Pacific North America HV/EV market forecast Over 10% of Vehicle Production 2 CY2020 Estimated
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF)
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF) EHS Regulatory Instrument Code of Practice EHS RI - CoP 18.0 Employer Supplied Accommodation General Requirements (Includes Temporary and Permanent Accommodation)
Federation of European Heating, Ventilation and Air-conditioning Associations
Federation of European Heating, Ventilation and Air-conditioning Associations Address: Rue Washington 40 1050 Brussels Belgium www.rehva.eu info@rehva.eu Tel: +32 2 514 11 71 Fax: +32 2 512 90 62 Use of
ngenieros Ingenieros Asociados De Control S.L.
ngenieros sociados de ontrol 1 Company founded in 1985 to serve commercial and technical assistance in the fields of instrumentation, control and installation for all types of industries. We offer top
DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing
![DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing](/thumbs/40/21574271.jpg "DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing")
Technical data sheet R5.. Characterized control valves, 3-way, with external thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
a pocket guide to: what engineers do engineering.asu.edu
a pocket guide to: what engineers do Engineers are innovators that discover and design ways to make people s lives easier, safer and better. Engineers create technology, infrastructure, processes and materials
How To Handle An Emergency
Company Name Address Telephone Contact Name Title Last Revision Date Policy and Organizational Statements Identify the goals and objectives for the emergency response plan. Define what your emergency response
11-3011 Administrative Services Managers 11-3021 Computer and Information Systems Managers 11-3031.00 Financial Managers 11-3071 Transportation,
Soc Code Job Title 11-3011 Administrative Services Managers 11-3021 Computer and Information Systems Managers 11-3031.00 Financial Managers 11-3071 Transportation, Storage, and Distribution Managers 11-9013
DGA - Method in the Past and for the Future
DGA - Method in the Past and for the Future Page 2 May 2012 1970 1973 Doerenburg introduced the differentiation between electrical and thermal failure mode and introduced ratios for fault gases with similar
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
A practical guide to restrictive flow orifices
Safetygram 46 A practical guide to restrictive flow orifices Restrictive flow orifices (RFOs) installed in cylinder valve outlets provide a significant safety benefit for users of hazardous gases, especially
Quick Start Guide Vodafone Business Connect
Quick Start Guide Vodafone Business Connect Safety instructions Read the following instructions carefully. Failure to comply with these instructions can be dangerous and/or illegal. You are solely responsible
Erasmus Subject Code --> ISCED Code (EN)
Erasmus Subject Code --> ISCED Code (EN) Subj Code SC Text Isced Description 01.0 Agricultural Sciences 62 Agriculture, forestry and fishery ERA-01.0 01.1 Agriculture 620 Agriculture, forestry and fishery
Take out an interest-free loan of 1,000 to 100,000
Energy Saving Scotland Small Business Loans Helping Scottish businesses reduce their energy costs Save some money Make some energy efficiency changes Who are we? The Energy Saving Scotland small business
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
Subject: Magnet Safety. Overview: Environmental Health & Safety Policy/Procedure Effective Date: July 29, 2011
Subject: Magnet Safety Environmental Health & Safety Policy/Procedure Overview: The purpose of this document is to define and clarify policies associated with the use of magnets and magnetic fields at
Required Light Levels
Required Light Levels RESIDENCES Reception areas (living rooms) (General) (Localized: reading, writing, etc) Kitchens ( General) (Localized: sink, table) Bedrooms ( General) (Localized: mirrors, children
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
MATERIAL SAFETY DATA SHEET
Air Liquide New Zealand Limited 19 Maurice Road Penrose Auckland 1061 Product Name: MATERIAL SAFETY DATA SHEET ALPHAGAZ TM 1 - Oxygen Phone: (09) 622 3880 Fax: (09) 622 3881 Emergency: 0800 156 516 Issued:
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
PAGE 2. Figure 1: Difference between PWL ins and SPL 1m
PAGE 1 Pipe noise J.H. Granneman and R.P.M. Jansen, Peutz Consulting Engineers, The Netherlands, emphasise the need for an adequate pipe noise control procedure, with reference to the design phase, insulation
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Course Requirements for the Ph.D., M.S. and Certificate Programs
Health Informatics Course Requirements for the Ph.D., M.S. and Certificate Programs Health Informatics Core (6 s.h.) All students must take the following two courses. 173:120 Principles of Public Health
home with Paying your bill - all of the convenience - none of the hassle Great new service - book a boiler service online
home At with Paying your bill - all of the convenience - none of the hassle Great new service - book a boiler service online Update your heating system and control your costs BGESAH0607 Services for the
Medical Gas Data Sheet (MGDS) Medical air
Medical Gas Data Sheet (MGDS) Medical air Essential safety information Summary of Product Characteristics (SPC) pages 2-6 Additional Safety Information pages 7-8 BOC: Living healthcare 2 Medical air SPC
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Standardiseringsprosjekter og nye standarder
Annonseringsdato: 2015-08-19 Listenummer: 14/2015 Standardiseringsprosjekter og nye standarder Listenummer: 14/2015 Side: 1 av 153 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt.
Ceriani Replica GP35R forks. Technical description
Ceriani Replica GP35R forks Technical description This is an advanced racing replica of the GP35 forks. The legs are made from 6061 aluminium, mounted with CNC machined fittings, the stanchions are from
Plastic Injection Molding
Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An
technical data air conditioning systems RXS20-25-35E (single phase) FBQ-B8V1-B8V3B Split Heat Pump Condensing Units Split Sky Air
technical data RXS20-25-35E FBQ-B8V-B8V3B (single phase) Split Heat Pump Condensing Units air conditioning systems Split Sky Air Outdoor Units R-40A RXS-E2VB Split Sky Air Outdoor Units Features O u t
SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3
PART #50190 SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3 PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER
GS-General Service Control Valves
GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service
Protocol for the Certification of Energy Simulation Software: First edition, December 2009
Copyright Agrément South Africa, December 2009 The master copy of this document appears on the website: http://www.agrement.co.za Protocol for the Certification of Energy Simulation Software: First edition,
ENVIRONMENTAL INFORMATION APR 1200 products are made from glass mineral wool, one of the most environmentally friendly insulants available.
APR 1200 Acoustic Partition Roll CI/Sfb Ref: APR002 Glass mineral wool roll designed to provide high levels of sound insulation in walls and floors to meet Part E (England & Wales) and Section 5 (Scotland)
Name: Air Conditioning, Heating and Refrigeration (47.0201)
Name: Air Conditioning, Heating and Refrigeration (47.0201) Directions: Evaluate the student by entering the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no
Transportation assistance parents are encouraged to car pool when driving to schools
s Towards Carbon Neutrality The actions listed below contribute to a reduction in greenhouse gas emissions from sources for which public sector organizations are responsible under the carbon neutral government
Energy Efficiency HOSPITALITY. www.energia.ie
Energy Efficiency HOSPITALITY www.energia.ie Your chance to reduce your business energy usage by as much as 20%! 20% is a significant figure and reducing your energy bill by this amount could make a real
Introduction... 2. Body Specifications... 3. Technical Data... 4. Body... 5. Interior Rear Seats... 6. Center Arm Rest... 7. Child Seat Restraint...
Table of Contents Subject Page Introduction.......................................... 2 Body Specifications.................................... 3 Technical Data........................................
Programma LLP/ERASMUS - codici ISCED (ex Aree Disciplinari ERASMUS)
0 General Programmes 01 Basic/broad, general programmes 010 Basic/broad, general programmes 1010 Basic programmes 1011 Broad, general programmes 1012 Arts and Crafts 1013 Music 1014 History 1015 Religion/Ethics
You ve. life. ahead. you... So, safe. the of. job!
You ve So, got your play whole it safe life on ahead the of job! you... So, play it safe on the job! Getting a job anytime soon? Money isn t the only thing to think about. If you re under 18 and thinking
Protocol for the Certification of Energy Simulation Software: Second edition, September 2011
Copyright Agrément South Africa, September 2011 The master copy of this document appears on the website: http://www.agrement.co.za SANS 10400: The application of the National Building Regulations: Protocol
MASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
Geothermal Ice Arenas
Geothermal Ice Arenas For more information, call: Ltd. 41 St. Paul Blvd. West St. Paul, MB R2P 2W5 Ph: (204) 255-5959 Fax: (204) 255-7365 Email: edlohrenz@shaw.ca Website: www.icekubeheat.com ICE Ice KUBE
Chelton. Lower Level. Crescendo Builders. Chelton. Bethesda, Maryland. Elevation A. Elevation A. an award winning homebuilder
Lower Level C ethesda, Maryland Crescendo uilders an award winning homebuilder The builder reserves its right to change, upgrade or alter its plans, specifications and materials without notice or obligation.
GRU Purchasing Material Group Codes
Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals
Diesel Fuel Systems. Injection Nozzles
Diesel Fuel Systems Injection Nozzles Unit Terms Injection nozzle Nozzle, nozzle holder, valve, spring assembly Nozzle assembly Valve, body, and spray valve Orifice Small hole Pintle Valve which the end
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 24 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia S TABLE OF CONTENT SCOPE 2 DEFINITIONS
Summary of Product Characteristics Medical Air
Summary of Product Characteristics Medical Air www.uk.airliquide.com 1. NAME OF THE MEDICINAL PRODUCT Medical Air 2. QUALITATIVE AND QUANTITATIVE COMPOSITION Air Ph.Eur. 100% 3. PHARMACEUTICAL FORM Inhalation
CEILING CASSETTE FAN COIL UNIT
CEILING CASSETTE FAN COIL UNIT Operation and Installation Manual MHCFC4W-04, 08, 12, 16 Four way ceiling cassette fan coil unit Please read this manual before using the fan coil unit. Installation and
Vacuum Tube Solar Water heater Non-pressure. User manual
Vacuum Tube Solar Water heater Non-pressure User manual Please read this manual carefully before beginning installation Specification Tubes 12 --- 30 58X1800 Nominal volume tank capacity 100L --- 300L
9,000lb capacity 4 Post Lift Installation Manual
9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled
Instruction Manual. Alfa Laval SB Membrane Sample Valve ESE02963-EN1 2015-10. www.sks-online.com www.sks-webshop.com.
Instruction Manual Alfa Laval SB Membrane Sample Valve ESE02963-EN1 2015-10 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
Reference in RID/ADR (restructured) to published standards and standards in preparation at CEN TC 23/256/261/268/286/296
Attachment 2 to quarterly report of CEN Consultant ADR/RID Reference in RID/ADR (restructured) to published standards and standards in preparation at CEN TC 23/256/261/268/286/296 Notes: the standards
Pressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
YOUR ROUTE TO UNDERGRADUATE SUCCESS. International Foundation Year
YOUR ROUTE TO UNDERGRADUATE SUCCESS International Foundation Year The University of Southampton s International Foundation Year gives you the skills needed to start your chosen undergraduate degree. The
Elgin Fire Department
Breathing Operations Elgin Fire Department Safety - Respiratory Protection Program - Self Contained Apparatus (SCBA) Policy # 2024.01 Issued: 09/08/06 Subject: Purpose: Scope: Self Contained Breathing
Information on New Refrigerant (R-1234yf) for A/C Service
Information on New Refrigerant (R-1234yf) for A/C Service 2013 Cadillac ATS, XTS This bulletin is being revised to include procurement and labeling information for recovery cylinders to be used with GE-50957-Contaminated
Building Services Engineering Technician
Building Services Engineering Technician A competent Building Services Engineering Technician is expected to be able to demonstrate the following skills and competences: Systems design in the building
BELZONA KNOW-HOW VALVES, PIPES AND FITTINGS BELZONA VPF SYSTEM SELECTOR BELZONA KNOW-HOW FOR VALVES, PIPES AND FITTINGS
KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF VALVES, PIPES AND FITTINGS B E L Z O N A V P F VPF SYSTEM SELECTOR FOR VALVES, PIPES AND FITTINGS SYSTEM Belzona VPF-1 Belzona VPF-2 Belzona VPF-3
HAND PUMP OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 767 HAND PUMP Read and understand this material before operating or servicing this equipment. Failure to understand how to safely operate this tool could
Construction. Using today s standards to build the future
Construction Using today s standards to build the future British Standards Online (BSOL) About BSI BSI (British Standards Institution) is the business standards company that equips businesses with the
Top Technology for Industry, Agriculture, Business and Communities
Top Technology for Industry, Agriculture, Business and Communities CHP The Technology with a Potential for Saving Energy Combined Heat and Power (CHP) is a highly efficient technology for the conversion
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and Astronautical Engineering Aeronautical Engineering Aeronautical
MANCHESTER UNITED SOCCER SCHOOLS CAMPS 2015 RESIDENTIAL FOOTBALL CAMPS
MANCHESTER UNITED SOCCER SCHOOLS CAMPS 2015 RESIDENTIAL FOOTBALL CAMPS LEARN TO PLAY THE UNITED WAY THE EXPERIENCE OF A LIFETIME This is how students have described their Football Camp. Our one week camps
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Overview of types. Technical data
Technical data sheet R3..xx-S.. Characterised control valves, 3-way, with internal thread For closed cold and warm water systems For modulating water-side control of HU and heating systems ir bubble-tight
PLATE HEAT EXCHANGER. Installation Manual. Customer Name: Serial number: Purchase order number: Project:
PLATE HEAT EXCHANGER Installation Manual Customer Name: Serial number: Purchase order number: Project: Table of Contents ----------------------------------------------------------------- Page: 2 3 Name
Vancouver Community College 2010 Carbon Neutral Action Report
Vancouver Community College 2010 Carbon Neutral Report Executive Summary Vancouver Community College is pleased to submit its Carbon Neutral Report in support of the Provincial initiative to reduce Greenhouse