Interoperabilidad entre BIM y software de eficiencia energética. Danny Lobos
|
|
- Lee Bryant
- 8 years ago
- Views:
Transcription
1 Latam Sustentable 2015 Congreso Internacional 25 de agosto de 2015 Interoperabilidad entre BIM y software de eficiencia energética Danny Lobos Arquitecto Dr Ing Bauhaus Alemania, profesor, investigador Pontificia Universidad Católica de Chile (PUC) 21 páginas
2 Interoperabilidad entre BIM y software de Eficiencia Energética Evento LATAMSUSTENTABLE Danny Lobos Dr-Ing, Architect BIM + BPS (Building Performance Simulation) Researcher Professor School of Civil Construction Pontificia Universidad Católica de Chile dlobosc@uc.cl web: RESUMEN DE PROYECTOS Teoría BIM-BPS Autodesk BPA BIM-BPS Map Diplomado BIM-BPS UC FONDECYT BEAM- BIM-BPS Calendario 2016 Eventos BIM-CHILE
3 PAPER 426 Interoperability Map between BIM and BPS Software Danny Lobos Pontificia Universidad Católica de Chile Lorena Silva Pontificia Universidad Católica de Chile Gerth Wandersleben Universidad del Bio-Bio Danny Lobos, Dr-Ing, Architect Dr-Ing, Arquitecto Fondecyt Researcher BIM + Building Performance Simulation Profesor Escuela de Construcción Civil Pontificia Universidad Católica de Chile dlobosc@uc.cl web:
4 Energy Analysis Software (BPS) Most of specialists make the BEM (Building Energy Modeling) models directly in the simulation software (old school). They must start from scratch (2d drawings of photos) Almost a 30% of the time is destinated to modelling tasks. A typical Ecotect model of a two storey residence. TAS model of a three storey residence.
5 BIM Software (Building Information Modeling) Most of BIM models are not aimed to energy analysis. BIM is still conceived as a tool that supports 3D/4D visualization, drawing/schedules generation and clash detection. So, efforts made during BIM modelling (a precise geometry of the building) have no effects in the building energy analysis. Software vendors have worked on interoperability formats but these formats are still not used massively.
6 BIM (Building Information Modeling) A key aspect to do exchange are the ROOMS/ZONES functions in BIM software. Once the walls are made these functions allow to create automatically a virtual volume within the walls. Normally this ROOM/AREAS are used to compute surfaces (Building GROOS/NET AREAS). But they do have a great potential to be transformed into useful ZONES for the BPS sofware. Then saving time to the Energy consultant. They do not need to model the building (it avoids redundancy).
7 BIM (Building Information Modeling) ROOMS/ZONES functions in BIM/SLP software. ARCHICAD (GRAPHISOFT) AUTODESK REVIT ALBERTI (AcadGraph, 1998) DIGITAL PROJECT DESIGNER (Gehry Technologies) AUTODESK ARCHITECTURE (Autodesk) VECTOR WORKS 10 (Nemetscheck, 2004) BENTLEY ARCHITECTURE (MICROSTATION V8). ALLPLAN BIM (Nemetschek) AFFINITY (Trelligence)
8 BIM (Building Information Modeling) ROOMS/ZONES functions Rooms in floor plan Simple zones Complex zones
9 Research in BIM-BPS The state of the art in this field presents: Semiautomatic methodologies to export between BIM and BPS through a IFC for Energy+, by changing GST rules to export (Bazjanac, ); Development of interoperability between applications with emphasis on various models of buildings, including IFC and CIS/2 formats (Eastman, 2011); Procedures and workflows between Revit gbxml and Trace 700, allowing a more complete HVAC equipment transfer (Ali, 2010). Howell proposes the XML, as the protocol for the transfer of subsets or "packages" relevant project information as a key opportunity to achieve interoperability between different disciplines, such as the case of gbxml. Lobos (2011) discusses a new parametric BIM based application for early design stages, where the urban codes determines the shape of the buildings, it allows direct links to the analysis of facades performance (VIDEO).
10 Commercial BIM software for Architecture REVIT from Autodesk Microstation Architecture from Bentley Digital Project from Gehry Technologies ArchiCAD from Graphisoft (now Nemetschek AG) Allplan from Nemetschek Lobos, 2012
11 BIM + BPS: a missing link. ArchiCAD REVIT Microstation Digital Project Allplan? EnergyPlus DesignBuilder TAS Ecotect ECODesigner IES_VE Vasari Green Building Studio
12 BIM-BPS Exchange CAD Formats for Building Performance Simulation
13 BIM-BPS Exchange CAD Formats for Building Performance Simulation ifcxml DXF Exported from Revit Geometry (2d/3d) Layers Not exported from Revit Materials (exception ECOTECT) gbxml Exported from Revit Building Type Building Location Geometry Orientation Area Volume Openings Location & Size (windows/doors) Not exported from Revit Materials (exception ECOTECT) IFC Industry Foundation Classes). object-oriented file format full geometric description in 3D object location and relationships properties (or parameters) of each object. structural, mechanical and energy analysis applications. IfcSpaces (AUTODESK, 2010)
14 BIM-BPS Exchange CAD Formats for Building Performance Simulation Full 3D Geometry Export DXF (AutoCAD/Revit/Archicad, etc) Space-Based Model gbxml (Revit, ADT, Vectorworks) Shadows & Overshadowing Air Flow & Ventilation Thermal Performance Transmitted Solar Radiation External Solar Availability Lighting & Daylight Analysis Energy Demands Sustainability Indexing (AUTODESK, 2010)
15 Fuente: la Salle Arquitectura BIM-BPS Exchange CAD Formats for Building Performance Simulation gbxml
16 BIM-BPS Exchange CAD Formats for Building Performance Simulation
17 Live demo 10minutes Vasari Revit Ecotect gbxml Ecotect Revit GBStudio Lobos, 2012
18 Experiments and Maps
19 Summary of experiments Table 3. Cases of BIM-BPS information exchange. Self Elaboration.
20 Summary schedule for data exchange Summary of BIM-BPS exchange tests. Self Elaboration Lobos & Silva 2013
21 Update in progress: Lobos BIM SOFTWARE FORMATS ECOTECT BPS SOFTWARE RADIANCE DAYSIM SIMERGY BUILDING PERFORMANCE REQUIREMENTS ILUMINATION CO2 Emissions Life cycle costs LEED Credit Analysis (Lighting) DIGITAL PROJECT AUTODESK REVIT DXF gbxml DESIGN BUILDER TAS equest HEATING COOLING Water use Energy use and cost Airflow/Ventilation Thermal Loads ARCHICAD ifcxml IES_VE VENTILATION (Day) Lighting (LEED & Energy Savings) ALLPLAN VASARI WATER Luminosity Fluxes MICROSTATION RVT ECODESIGNER ACOUSTIC Shading ARCHITECTS, ENGINEERS, CONSTRUCTORS AEC SOFTWARE COMPANIES GREEN BUILDING STUDIO AECOSym ENERGY PERFORMANCE CONSULTANTS CO2 GOVERMENT ENERGY REQUIREMENTS Solar Acoustic Climate Energy code compliance Lobos
22 Thanks for your attention DANNY LOBOS Autodesk BPA Program 3rd BPS software user meeting 2016 Diplomado BIM-BPS UC Lo contador
A Thermal Simulation Tool for Building and Its Interoperability through the Building Information Modeling (BIM) Platform
Buildings 2013, 3, 380-398; doi:10.3390/buildings3020380 Article OPEN ACCESS buildings ISSN 2075-5309 www.mdpi.com/journal/buildings/ A Thermal Simulation Tool for Building and Its Interoperability through
More informationA WORKFLOW ANALYSIS FOR BIM SOFTWARE: ARCHITECTURAL AND MECHANICAL ENGINEERING DEPARTMENT OF ARUP TURKEY
ISTANBUL TECHNICAL UNIVERSITY FACULTY OF ARCHITECTURE DEPARTMENT OF DESIGN COMPUTING BIM 2037 / BUILDING INFORMATION MODELS INSTRUCTOR: Salih OFLUOĞLU A WORKFLOW ANALYSIS FOR BIM SOFTWARE: ARCHITECTURAL
More informationBIM: FOR PROJECT MANAGERS. 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am
BIM: FOR PROJECT MANAGERS ANA BAKER BRANDON GARRETT 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am 1 2 3 4 BIM Overview BIM Level of Development Evolution of the Drawing Process BIM Workflow
More informationAn Integrated Conceptual Design Process for Energy, Thermal Comfort, and Daylighting
An Integrated Conceptual Design Process for Energy, Thermal Comfort, and Daylighting Prepared for: Jim Sweeney Director of the Precourt Institute for Energy Efficiency; Professor of Management Science
More informationBuilding Information Modelling (BIM); How it Improves Building Performance. R.P. Kumanayake Lecturer, Department of Civil Engineering
Building Information Modelling (BIM); How it Improves Building Performance R.P. Kumanayake Lecturer, Department of Civil Engineering R.M.P.S. Bandara Lecturer, Department of Mechanical Engineering Faculty
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 2013 http://acousticalsociety.org/ ICA 2013 Montreal Montreal, Canada 2-7 June 2013 Architectural Acoustics Session 5aAAa: Room Acoustics Computer Simulation
More informationGreen BIM/ Early BIM/
Green BIM/ Early BIM/ Agenda/ Introduction to Sustainability Process Environmental Analysis Tools Environmental Analysis Relation to LOD Conclusion Disclaimer/ This seminar is looking at Building Performance
More informationThermal comfort and Energy Efficiency in
Faculty of Engineering Division of Infrastructure, Geomatics and Architecture Architecture, Climate & Environment Research Group INVITED LECTURE BY DR MAUREEN TREBILCOCK Thermal comfort and Energy Efficiency
More informationGetting Started with Web Service Tools for Whole Building Analysis
Autodesk Ecotect Analysis 2010 Getting Started with Web Service Tools for Whole Building Analysis Customers who add subscription to their Autodesk Ecotect Analysis license can access 1 whole building energy,
More informationSoftware - Preliminary Design and Feasibility Tools
Software - Preliminary Design and Feasibility Tools Revit Architecture DProfiler Bentley Architecture SketchUp ArchiCAD Vectorworks Designer Tekla Structures Affinity Beck Technology Google Graphisoft
More informationBIM to Sim. Drury B. Crawley, Ph.D. FASHRAE, BEMP, FIBPSA, AIA Bentley Systems, Inc.
BIM to Sim (How do I get that rich data into my simulations without re-entering?) Drury B. Crawley, Ph.D. FASHRAE, BEMP, FIBPSA, AIA Bentley Systems, Inc. Building Energy Simulation Forum 18 December 2013
More informationDeveloping 6D BIM Energy Informatics for GDL LEED IFC Model Elements
Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management Istanbul, Turkey, July 3 6, 2012 Developing 6D BIM Energy Informatics for GDL LEED IFC Model Elements
More informationAC 2011-96: IMPLEMENTING BUILDING INFORMATION MODELING IN CONSTRUCTION ENGINEERING CURRICULA
AC 2011-96: IMPLEMENTING BUILDING INFORMATION MODELING IN CONSTRUCTION ENGINEERING CURRICULA Don Chen, University of North Carolina, Charlotte Professional Preparation Iowa State University, Ames, Iowa
More informationOPEN BIM Collaboration Pilot: The Faith Lutheran College Secondary School
OPEN BIM Collaboration Pilot: The Faith Lutheran College Secondary School Fulton Trotter Architects Overview The Faith Lutheran College Secondary School is located in the suburb of Plainland one hour West
More informationThe Evolution of HVAC Software and the Revolution of BIM!
! Presented by Joseph V. Simmons, P.E. What What has been! What is! And what will---be the role of software in the HVAC industry? FOR Consultants Contractors Manufacturer s Representatives Building Owners
More informationRealizing the Future of Sustainable Design through BIM and Analysis
MEP ENGINEERING Realizing the Future of Sustainable Design through BIM and Analysis By Robert E Middlebrooks, AIA In the United States, buildings are responsible for almost half of all annual green house
More informationBUILDING INFORMATION MODELLING. The Designer. CIC East and IDBE. David Hymas
BUILDING INFORMATION MODELLING The Designer CIC East and IDBE David Hymas David Hymas Technical Director - BNI Building Services Engineer Building Services BIM Champion for MM Mott MacDonald 4 Years 18
More informationAppendix E Specific Examples of Digital Technologies for Construction
Appendix E Specific Examples of Digital Technologies for Construction This appendix provides additional comments and identifies specific providers and examples for the five digital technologies identified
More informationBIM SOFTWARE EVALUATION MODEL FOR GENERAL CONTRACTORS
BIM SOFTWARE EVALUATION MODEL FOR GENERAL CONTRACTORS By JOSE MAURICIO RUIZ A THESIS PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE
More informationThe open source solution for the Property & Facility Management www.openmaint.org
1 The open source solution for the Property & Facility Management www.openmaint.org www.openmaint.org www.tecnoteca.com 2 What is openmaint openmaint is an enterprise solution for the Property & Facility
More informationCONCEPTUAL DESIGN ENERGY ANALYSIS TOOL (CDEAT) PHASE III
CONCEPTUAL DESIGN ENERGY ANALYSIS TOOL (CDEAT) PHASE III Prepared For: California Energy Commission Public Interest Energy Research Program PIER FINAL PROJECT REPORT Arnold Schwarzenegger Governor Prepared
More informationThe importance of Software to calculate the ability of Architecture to reduce energy demand in buildings
The importance of Software to calculate the ability of Architecture to reduce energy demand in buildings Abstract: The directive 2010/31 /EU determines that after December 31, 2018, new buildings occupied
More informationLACCD Building Information Modeling Standards For Design-Bid Build Projects
LACCD Building Information Modeling Standards For Design-Bid Build Projects (LACCD BIMS) Interim Version 2.0 Prepared by: September 9, 2009 TABLE OF CONTENTS 1. INTRODUCTION 1 1.1. Overview 1.2. Main Objectives
More information6420 Thermal Analysis of Buildings
6420 Thermal Analysis of Buildings Design Rules of Thumb Model Energy Considerations Christoph Reinhart L01 Building Energy Simulation Analysis Course Objectives This seminar will introduce students to
More informationBuilding Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design
Building Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design Florian Aalami CEO ADAPT Corporation florian@adaptsoft.com What is BIM? The ability to model
More informationSoftware - Preliminary Design and Feasibility Tools
Software - Preliminary Design and Feasibility Tools Revit Architecture DProfiler Beck Technology Creating and reviewing 3D models Conceptual Design and Cost Estimation Revit technology is s platform for
More informationInteroperability with Structural Disciplines
Interoperability with Structural Disciplines GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability information. Interoperability with Structural
More informationDesign without compromise. Autodesk Revit. Architecture
Design without compromise. Autodesk Revit Architecture Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
More informationUsing BIM In HVAC Design
This article was published in ASHRAE Journal, June 2010. Copyright 2010 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. Posted at www.ashrae.org. This article may not be
More informationCertified Instructors & Curriculum
Our Promise. TPM is dedicated to provide the most extensive and high-quality training programs to help you maximize your investment. Although the investment in time and money may seem substantial, it will
More informationCIFECENTER FOR INTEGRATED FACILITY ENGINEERING
CIFECENTER FOR INTEGRATED FACILITY ENGINEERING Building Energy Performance Simulation Tools - a Life-Cycle and Interoperable Perspective By Tobias Maile, Martin Fischer & Vladimir Bazjanac CIFE Working
More informationAutodesk Revit Architecture. Design without compromise.
Autodesk Revit Architecture Design without compromise. Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
More informationAutodesk Revit LEARNING PATH BUILDING DESIGN SUITE
Autodesk Revit LEARNING PATH FUNDAMENTALS Duration: 3 days Cost: R5 500 (excl VAT) Revit MEP Duration: 3 days Cost: R5 500 (excl VAT) Revit Structure Duration: 3 days Cost: R5 500 (excl VAT) REVIT ADVANCED
More information3-D Modeller Rendered Visualisations
Recognised energy Dynamic Simulation Modelling (DSM) software DesignBuilder is a user interface to the EnergyPlus DSM. EnergyPlus builds on the most popular features and capabilities of BLAST and DOE-2
More informationBuilding Information Modeling for MEP Engineering. Revit MEP 2008
Building Information Modeling for MEP Engineering Revit MEP 2008 Design Intuitively with Tools That Work the Way Engineers Think Revit MEP software is an intuitive design tool that works the way engineers
More informationImproving Design Workflow in Architectural Design Applications
Improving Design Workflow in Architectural Design Applications Stefan Boeykens, Herman Neuckermans K.U.Leuven Department of Architecture, Urban Design and Planning Kasteelpark Arenberg 1, B-3001 Leuven
More informationPerformance by design. Autodesk Revit MEP
Performance by design. Autodesk Revit MEP Step up to the challenge. Autodesk Revit MEP software helps mechanical, electrical, and plumbing engineering firms meet the heightened demands of today s global
More informationDesign without compromise. Autodesk Revit. Architecture 2010
Design without compromise. Autodesk Revit Architecture 2010 BIM Simply a Better Way of Working Deliver projects faster, more economically, and with enhanced potential for reduced environmental impact.
More informationCompany Presentation Nemetschek Group
Company Presentation Nemetschek Group January 15, 2014 Who we are History Company foundation: 50 years ago by Prof. Georg Nemetschek Innovation: Computer Aided Design (CAD) software replaced drawing board
More informationPerformance by design. Autodesk Revit MEP
Performance by design. Autodesk Revit MEP Step up to the challenge. Autodesk Revit MEP software helps mechanical, electrical and plumbing engineering firms meet the heightened demands of today s global
More informationGestión BIM a lo largo del ciclo de vida del proyecto. Manuel Bouzas Cavada, Arquitecto MArch, RIBA, PMP, LEED GA
Gestión BIM a lo largo del ciclo de vida del proyecto Manuel Bouzas Cavada, Arquitecto MArch, RIBA, PMP, LEED GA Nuevo Volvo XC90, por solo 499.995 Rogier Jongeling, Thomas Olofsson and Håkan Norberg.Virtual
More informationGeospatially Enabling the World: The Convergence of Geospatial and Architectural and Engineering Design
Geospatially Enabling the World: The Convergence of Geospatial and Architectural and Engineering Design Geoff Zeiss Director of Technology Autodesk Map Middle East Dubai 2007 1 Overview Geospatial inflection
More informationBuilding Information Modelling (BIM) in the Malaysian Architecture Industry
Building Information Modelling (BIM) in the Malaysian Architecture Industry M.F.I MOHD-NOR Architecture University Kebangsaan Malaysia Bangi, Selangor MALAYSIA Michael P.Grant Architecture University of
More informationOlilo's AEC Design Services. SrinSoft Inc, Partners of
Olilo's AEC Design Services SrinSoft Inc, Partners of Olilo provides design services that include design and analysis, cost estimation, 3D modeling, 2D drafting, conversion from 2D to 2D, quantity take-off,
More informationDecision-making Methodology & Selection Tools for High-performance Window Systems in U.S. Climates Kerry L. Haglund 1
ABSTRACT Decision-making Methodology & Selection Tools for High-performance Window Systems in U.S. Climates Kerry L. Haglund 1 Selecting a glazing system requires an understanding of a series of variables
More informationA BIM Case Study: SELCEN Mimarlik
A BIM Case Study: SELCEN Mimarlik Final Submission 19 January 2012 Yekta Ipek 523101013 MBL607E::Building Information Models Instructor: Salih Ofluoglu Istanbul 2012 Building Information Models Final Submission
More informationDiego Ibarra Christoph Reinhart Harvard Graduate School of Design
Building Performance Simulation for Designers - Energy DesignBuilder // EnergyPlus Tutorial #2 Load Schedules GEOMETRY LOADS RESULTS Diego Ibarra Christoph Reinhart Harvard Graduate School of Design OVERVIEW
More informationPaolo Musso, Stam S.r.l. p.musso@stamtech.com
Paolo Musso, Stam S.r.l. p.musso@stamtech.com This project has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant
More informationCPIx on Line. Post Contract-Award Building Information Modelling (BIM) Execution Plan (BEP) Supporting the HMG Construction Strategy.
CPIx on Line Post Contract-Award Building Information Modelling (BIM) Execution Plan (BEP) Project Name: Project Address: Project Number: Date: Document No: Date: March 2013 Revision: R1 Status: Published
More informationReport of the Results of the 2015 Off-Site Construction Industry Survey of Software Usage
Off-Site Construction Council Report of the Results of the 2015 Off-Site Construction Industry Survey of Software Usage An Authoritative Source of Innovative Solutions for the Built Environment 1090 Vermont
More informationDEVELOPMENT OF WEB-BASED SUN-HOURS AND ENERGY ANALYSIS SYSTEM USING IFC
DEVELOPMENT OF WEB-BASED SUN-HOURS AND ENERGY ANALYSIS SYSTEM USING IFC Jae-Sung Joo 1 *, Min-Sung Kim 1, Young-Hwan Song 1, Deuk-Hwan Lim 1, Kun-Il Lee 2, Hong-Wook Kim 1 1Sun&Light CO.,Ltd., 2F Metro
More informationBeijing National Swimming Centre, China American Institute of Architects Building Information Model (BIM) Awards Competition 2004 (TAP) Knowledge
Beijing National Swimming Centre, China American Institute of Architects Building Information Model (BIM) Awards Competition 2004 (TAP) Knowledge Community Beijing National Swimming Centre The National
More informationNEW YORK CITY DEPARTMENT OF DESIGN + CONSTRUCTION
NEW YORK CITY DEPARTMENT OF DESIGN + CONSTRUCTION July 2012 BIM Guidelines Michael R. Bloomberg, Mayor David J. Burney, FAIA, Commissioner David Resnick, AIA, Deputy Commissioner TABLE OF Contents Message
More informationIES <Virtual Environment> training. Trainee notes. ASHRAE 90.1 Appendix G - PRM Navigator. Version 6.4.0.7
IES training Trainee notes ASHRAE 90.1 Appendix G - PRM Navigator Version 6.4.0.7 Introduction These training notes are to be used in conjunction with your ASHRAE 90.1 Appendix G
More informationSteel construction. Miscellaneous steel. Industrial structures. www.graitec.com
Steel construction Miscellaneous steel BIM SOFTWARE FOR STRUCTURAL STEEL ENGINEERING, DETAILING AND FABRICATION www.graitec.com Industrial structures Advance Steel is specifically designed for structural
More informationPAE Consulting Engineers Creates Built Environments that Give Back
PAE Consulting Engineers Creates Built Environments that Give Back Studies in Success Company: PAE Consulting Engineers, Inc. Software on Board: PAE relies on Autodesk Revit MEP, AutoCAD MEP, Autodesk
More informationIntegrated Data and Process Control During BIM Design
BYG DTU Niels Treldal Integrated Data and Process Control During BIM Design Focused on Integrated Design of Energy and Indoor Climate Conditions Master s Thesis, February 2008 Integrated Data and Process
More information2012 BIM Guidelines and Standards (Rev. 00) University at Albany
A. Building Information Modeling (BIM) Guidelines: The Office of AECM will require the submission of BIM modeling files as part of an electronic file submission to the AECM project manager as requested
More informationADOPTION OF BUILDING INFORMATION MODELING AND NIGERIA S QUEST FOR PROJECT COST MANAGEMENT AGELE J. ALUFOHAI, MPM, MRICS, FNIQS
ADOPTION OF BUILDING INFORMATION MODELING AND NIGERIA S QUEST FOR PROJECT COST MANAGEMENT AGELE J. ALUFOHAI, MPM, MRICS, FNIQS President, Nigerian Institute of Quantity Surveyors. SUMMARY The relevance
More informationDRAFT BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR ARCHITECTS AND ENGINEERS
DRAFT BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR ARCHITECTS AND ENGINEERS Table of Contents 1 Introduction...3 1.1. Statement of Purpose...3 1.2. BIM Competence and Responsibilities...3
More informationEnergy-Plus Primary School, Hohen Neuendorf, Germany
Energy-Plus Primary School, Hohen Neuendorf, Germany Ingo LÜTKEMEYER, Prof. Dipl.-Ing. Architekt BDA 1 Jens KRAUSE, Dipl. Ing. 2 Günter LÖHNERT, Dr. Ing. 3 Holger KÖNIG, Dipl.-Ing. 4 Detlef HENNINGS, Dr.
More informationBUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR CONSTRUCTION CONTRACTOR IN A DESIGN- BID-BUILD PROCESS
BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR CONSTRUCTION CONTRACTOR IN A DESIGN- BID-BUILD PROCESS Final Version March 16, 2011 TABLE OF CONTENTS Page Contents 1. Introduction...
More informationRESOURCE GUIDE. A guide for implementing Building Information Modeling in State of Maryland and Washington DC public school construction projects
BIM RESOURCE GUIDE A guide for implementing Building Information Modeling in State of Maryland and Washington DC public school construction projects First Draft May 213 ASBO MD/DC BIM COMMITTEE MEMBERS
More informationBuilding Energy Modelling. prescriptive
Building Energy Modelling prescriptive An alternative to Design for SANS 10400-XA Contents Complying with the new building energy standard - SANS 10400-XA 3 Compliance options Two rational design routes
More informationEnvironmental Simulation Tools in Architectural Practice. The impact on processes, methods and design.
Environmental Simulation Tools in Architectural Practice. The impact on processes, methods and design. Emanuele Naboni 1 1 Institute of Architectural Technology, The Royal Danish Academy, School of Architecture,
More informationT.41.B.3 Solar design of buildings for architects: Review of solar design tools
IEA SHC TASK 41: SOLAR ENERGY AND ARCHITECTURE T.41.B.3 Solar design of buildings for architects: Review of solar design tools Subtask B: Methods and Tools for Solar Design Task 41 - Solar Energy and
More information4.430 Daylighting. Christoph Reinhart. 4.430 Daylight Simulations
4.430 Daylighting Christoph Reinhart 4.430 Daylight Simulations Massachusetts Institute of Technology Department of Architecture Building Technology Program 1 MISC Google DIVA forum, onebuilding.org, radianceonline.org
More informationBIM and API Extensions
REVIT BUILDING INFORMATION MODELING BIM and API Extensions This whitepaper explains how the utility of BIM solutions such as Revit Structure software can be broadened through the use of specialized software
More informationBIM UNDERSTANDING THE PROCESS The State of the Art Tool in Design and Construction SPONSORED BY SAME, DC POST IN ASSOCIATION WITH ACEC M/W
BIM UNDERSTANDING THE PROCESS The State of the Art Tool in Design and Construction SPONSORED BY SAME, DC POST IN ASSOCIATION WITH ACEC M/W Insanity: doing the same thing over and over again and expecting
More informationRAPID ENERGY MODELING FOR EXISTING BUILDINGS:
EXECUTIVE SUMMARY RAPID ENERGY MODELING FOR EXISTING BUILDINGS: Testing the Business and Environmental Potential through an Experiment at Autodesk NOVEMBER 2009 1. Executive Summary Retrofits of existing
More informationAn easy-learning and easy-teaching tool for indoor thermal analysis - ArcTech
An easy-learning and easy-teaching tool for indoor thermal analysis - ArcTech Léa Cristina Lucas de Souza 1, João Roberto Gomes de Faria 1 and Kátia Lívia Zambon 2 1 Department of Architecture, Urbanism
More informationCAD & BIM: Is There A Free Pass? A Report on GRAPHISOFT ArchiCAD s DWG Workflow. Ralph Grabowski December 2010
CAD & BIM: Is There A Free Pass? A Report on GRAPHISOFT ArchiCAD s DWG Workflow Ralph Grabowski December 2010 a research paper from funded by Graphisoft an imprint of upfront.ezine Publishing, Ltd. CAD
More informationBIM BUILDING INFORMATION MODELLING. Understanding its functions in the future of the Architectural profession.
BIM BUILDING INFORMATION MODELLING. Understanding its functions in the future of the Architectural profession. Ar Chan Seong Aun 7 November 2015 SYNOPSIS Recently there have been many discussions both
More informationBUILDING A STRATEGY FOR BIM
BUILDING A STRATEGY FOR BIM A Roadmap for Clients Graham Jones Chair, Davis Langdon BIM Steering Group Building a Strategy for BIM: A roadmap for Clients Introduction Conditions for Success Why? What How?
More informationGRAPHISOFT ArchiCAD and COBie2. How to Prepare your ArchiCAD 17 Project for COBie2 Documentation
GRAPHISOFT ArchiCAD and COBie2 How to Prepare your ArchiCAD 17 Project for COBie2 Documentation GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability
More informationParametric Analysis of School Classroom Typologies' Energy Performance
PLEA2013-29th Conference, Sustainable Architecture for a Renewable Future, Munich, Germany 10-12 September 2013 Parametric Analysis of School Classroom Typologies' Energy Performance MAUREEN TREBILCOCK
More informationProgram Advisory Committee (PAC) Agenda. December 14, 2011 9:00am 3:00pm PST. Agenda Items:
BOULDER NASHVILLE SAN FRANCISCO KANSAS CITY SPRINGFIELD, MO FAIRFAX, VA 2540 Frontier Avenue, Suite 100 Boulder, Colorado 80301 303.444.4149 SUBJECT: Date: Program Advisory Committee (PAC) Agenda December
More informationBuilding Information Modeling (BIM): A New Paradigm for Visual Interactive Modeling and Simulation for Construction Projects
First International Conference on Construction in Developing Countries (ICCIDC I) Advancing and Integrating Construction Education, Research & Practice August 4-5, 2008, Karachi, Pakistan Building Information
More informationTransition to 3D Fabrication Workflows
Autodesk Autodesk Fabrication Solutions Transition to 3D Fabrication Workflows Autodesk is committed to the use of Building Information Modeling (BIM) to drive integrated and connected data across the
More informationLecturers: Per Kortegaard, Associate Professor, Arkitekt MAA Søren Sti Andersen, Arkitekt MAA, Aarhus Arkitekterne
Lecturers: Per Kortegaard, Associate Professor, Arkitekt MAA Søren Sti Andersen, Arkitekt MAA, Aarhus Arkitekterne What 3D? Building Information Modeling in 3D So what is BIM? And why? This is BIM The
More informationSKANSKA S NEW HEADQUARTER IN HELSINKI, FINLAND. Tiina Koppinen Skanska Finland
openbim building project: SKANSKA S NEW HEADQUARTER IN HELSINKI, FINLAND Skanska Finland 1 Contents t Skanska k Who are we? BIM Implementation in Skanska Globally openbim in Finland Example Skanska House,
More informationCoordinating and Sharing Information with Revit Architecture and Revit Structure Best Practices!
Revit Architecture and Revit Structure Best Practices! Erleen Hatfield Thornton-Tomasetti Uk Jung SE304-1 This class identifies best practices using Revit Architecture and Revit Structure for sharing and
More informationGSA Automation of Court Design Guide
GSA Automation of Early Concept Design Chuck Eastman, Yeon-Suk Jeong, Jae min Lee, Jin Kook Lee, Sherif Abdelmohsen, Hugo Sheward, Paola Sanguinetti GEORGIA TECH Early Concept Design Review - Project Purpose
More information2D and 3D Modeling Comparison
BACHELOROPPGAVE: 2D and 3D Modeling Comparison FORFATTER(E): RITA GAIDYTĖ Dato: 27. 05. 2010 Summary Title: 2D and 3D Modeling Comparison Date: 25.06.10 Author: Rita Gaidytė Supervisors: Employer: Contact
More informationA Methodological Shift in Building Design through Development of Collaborative Design Platforms
ctbuh.org/papers Title: Authors: Subject: Keywords: A Methodological Shift in Building Design through Development of Collaborative Design Platforms Jonatan Schumacher, CORE Studio, Thornton Tomasetti Matthew
More informationBIM GUIDE. Developed for
BIM GUIDE Developed for BIM GUIDE Protocols and Project Execution Plan 1 Table of Contents.. Objective... P. 4.. Roles & Responsibilities... P. 5.. Contract Strategies... P. 8.. Level of Development...
More informationInteroperability Challenges of an Engineering Software Provider
Interoperability Challenges of an Engineering Software Provider Tamás Rácz Luleå University of Technology, Luleå, Sweden Thomas Olofsson Luleå University of Technology, Luleå, Sweden ABSTRACT: The purpose
More informationFuturistic Transport. Courtesy rick horn. metropolis
Futuristic Transport Courtesy rick horn 116 metropolis A striking silhouette against the Southern California landscape, the Anaheim Regional Transportation Intermodal Center is an intriguing feat of collaborative
More informationAcademic Study Plan 1991
Education and Scientific Research University of Technology / Baghdad-Iraq Academic Study Plan 1991 Postgraduate curriculum Master degree 1/ 7 MASTERS IN ARCHITECTURAL TECHNOLOGY First Semester 1. Design
More informationDiablo Valley College Catalog 2014-2015
Architecture ARCHI Tish Young, Dean Physical Sciences and Engineering Division Physical Sciences Building, Room 263 Possible career opportunities Students are provided with a strong background in spatial
More informationBuilding Information Modelling Principles for Building envelopes
Technical Note No 93 Building Information Modelling Principles for Building envelopes Building Information Modelling (BIM) is being adopted by the construction industry led in part by some s and driven
More informationHybrid Model for Developing BIM Software Extensions
Journal of Advanced Management Science Vol. 3, No. 3, September 2015 Hybrid Model for Developing BIM Software Extensions Jesus N. Zaragoza-Grife, Romel G. Solis-Carcaño, and Gilberto A. Corona-Suarez Faculty
More informationScope of Building Information Modeling (BIM) in India
Journal of Engineering Science and Technology Review 2 (1) (2009) 165-169 Research Article JOURNAL OF Engineering Science and Technology Review www.jestr.org Scope of Building Information Modeling (BIM)
More informationFinal Report Collaboration Platform
Final Report Collaboration Platform Research Project No: 2007-003-EP The research described in this report was carried out by Project Leader Research Leader Team Members Claudelle Taylor Ning Gu Kerry
More informationUser Manual. IDA Indoor Climate and Energy. EQUA Simulation AB February 2013. Version 4.5. Copyright 2013 EQUA Simulation AB
User Manual IDA Indoor Climate and Energy Version 4.5 EQUA Simulation AB February 2013 Copyright 2013 EQUA Simulation AB The author and the publisher make no representation or warranties of any kind with
More informationINTEGRATING BIM WITH SYSTEM DYNAMICS AS A DECISION-MAKING FRAMEWORK FOR SUSTAINABLE BUILDING DESIGN AND OPERATION
INTEGRATING BIM WITH SYSTEM DYNAMICS AS A DECISION-MAKING FRAMEWORK FOR SUSTAINABLE BUILDING DESIGN AND OPERATION Lawrence C. Bank 1, Michael McCarthy 2, Benjamin P. Thompson 2, Carol C. Menassa 2 1 The
More informationGSA. Circulation and Security Validation. GSA BIM Guide Series 006. www.gsa.gov/bim
GSA Circulation and Security Validation GSA BIM Guide Series 006 COPYRIGHT 2007 BY General Services Administration If you would like to contact the authors, please write to: The National 3D-4D-BIM Program
More informationBuilding Performance Simulation Tools: Selection Criteria and User Survey
Building Performance Simulation Tools: Selection Criteria and User Survey Research Based Report 31 January 2010 prepared by Shady Attia, Architecture et climat, Université catholique de Louvain, Louvain
More informationSmart building as a power plant energyplus house with energy charge management
Institut für Gebäude- und Solartechnik Prof. Dr.-Ing. M. Norbert Fisch Mühlenpfordtstraße 23 D-38106 Braunschweig www.tu-braunschweig.de/igs Smart building as a power plant energyplus house with energy
More information