RÉSUMÉ (April 2010) EDUCATION

Size: px
Start display at page:

Download "RÉSUMÉ (April 2010) EDUCATION"

Transcription

1 RÉSUMÉ (April 2010) NAME - SURNAME : Dr. Bilsay SÜMER ADDRESS : Hacettepe University, Mechanical Engineering Department, Room: A-308 Beytepe 06800, ANKARA PHONE : +90(312) (Ofis) FAX : +90(312) bsumer@hacettepe.edu.tr DATE OF BIRTH AND PLACE : Samsun, 1979 LANGUAGES : Turkish (native speaker), English (perfect), German (elementary) EDUCATION 2009 Ph. D Mechanical Engineering Department, Carnegie Mellon University (CMU), Pittsburgh, PA, USA MSc Mechanical Engineering Department, Carnegie Mellon University (CMU), Pittsburgh, PA, USA BSc (Honor Student) Mechanical Engineering Department, Middle East Technical University (METU), Ankara, TURKEY 1998 High School Mehmet Emin Resulzade Anatolian High School, Ankara, TURKEY 1

2 ACADEMIC AND WORK EXPERIENCE 2010 Feb. - Assistant Professor Hacettepe University, Mechanical Engineering Department, Beytepe, Ankara, TURKEY PhD Student and Research Assistant NSF scholarship Mechanical Engineering Department Carnegie Mellon University, Pittsburgh, PA, USA PhD Student and Research Assistant YÖK Scholarship Mechanical Engineering Department Carnegie Mellon University, Pittsburgh, PA, USA MSc Student YÖK scholarship Mechanical Engineering Department Carnegie Mellon University, Pittsburgh, PA, USA Spring Research Assistant Hacettepe University, Mechanical Engineering Department Ankara, TURKEY 2003 Fall Research Assistant (Sonbahar Dönemi) Mechanical Engineering Department Braunschweig Techinal University, Braunschweig, Germany. 2002Summer Ş.A.R.A Factory, Summer Internship, Ankara, TURKEY 2001Summer Orta Doğu Rulman Sanayi (ORS), Summer Internship, Ankara, TURKE 2

3 COURSES TAUGHT Hacettepe University Graduate Level - Micro/Nano Robotics (MMÜ 544) (3-0-0) - Sensing and Sensors (MMÜ 546) (3-0-0) Carnegie Mellon University Undergraduate and Graduate Level - Micro/Nano Robotics (3-0-0) Spring Engineering Laboratory (3-0-0) Spring Advanced Numerical Methods (3-0-0) Fall Numerical Methods (3-0-0) Spring 2006 CERTIFICATES Field Emission Transmission Electron Microscope (FEI Tecnai F20) (Carnegie Mellon University (CMU), Pittsburgh, PA) Atomic Force Microscopy (Veeco-CpII ve M5 Park Instruments AFM) (Carnegie Mellon University (CMU), Pittsburgh, PA) Micro System Analyzer (MSA 500, Polytech) (Carnegie Mellon University (CMU), Pittsburgh, PA) Robotics Institute Machine-Shop Super-user (Carnegie Mellon University, Robotic Institute) Hazardous Chemical Material Training (Carnegie Mellon University, Chemical Engineering Department) 3

4 RESEARCH AREAS AND INTERESTS Bio-Inspired Micro/Nano Actuators, Sensors and Mobile Robots Piezoelectric polymer (PVDF), Piezoelectric ceramic materials (PZT) ve shape memory alloys (SMA) Piezoelectric polymer fiber arrays for tactile sensing (Pressure mapping) Micro/ Nano fiber array for pressure and flow sensing Micro/ Nano fiber array vibration sensors Energy harvesting and control Bio-inspired robots (water strider, jesus lizard, gecko robots) Therapeutic Capsule Endoscopic Robots Micro swimming robots inside human beings Robotic Micro and Nano-Assembly Precise manipulation and autonomous assembly of micro and nano-sized structures Surgical operations using Atomic Force Microscopy (AFM) as an haptic device (Telenano-human AFM interface) AFM tip based fiber drawing and production Micro-nano manipulation of particles and fibers High density data storage system using AFM tips Synthetic gecko hair fabrication for dry adhesion Micro-Nano Scale Tribology and Contact Mechanics Lateral Force Microscopy applications Adhesive and friction chracterization of polymer materials (PMMA, PDMS, PS vb.) Stick-Slip friction characterization Vibration induced friction Characterization of micro/nano materials (fiber, nano-crystals, particle) 4

5 Micro-nano Fiber Production Electrospinning and Dry Spinning Applications to fabricate 3D polymer micro/nano fibers and develop fiber networks using these fibers High performance micro-nano filters Protective textiles Scaffolds in tissue engineering Piezoelectric micro/nano sensor production Thermal and sound insulators New generation lightweight metals devolopment and characterization for automotive applications Magnesium Alloys Aluminium Alloys LABORATORY FOUNDATION AND DEVELOPMENT 1) CMU Micro/Nano Robotic Laboratory Mechanical Engineering Department Piezoelectric Laboratory Foundation ve development Date: TRAINED LAB DEVICES 1) JEOL JSM-6400 Scanning Electron Microscope (Carnegie Mellon University, USA) 2) JEOL JEM-2010 Transmission Electron Microscope (Carnegie Mellon University, USA) 3) Veeco-CpII ve M5 AFM Atomik Kuvvet Microskopları (Carnegie Mellon University, USA) 4) Micro System Titreşim Ölçer MSA-500 Polytech (Carnegie Mellon University, USA) 5) Nikon L200 Upright Optical Microscope (Carnegie Mellon University, USA) 4) Nikon TE200 Inverted OpticalMicroscope (Carnegie Mellon University, USA) 5) Venus Micro Laser Cutter (Carnegie Mellon University, USA) 6) Sutter P-97 Micro-pippet Puller (Carnegie Mellon University, USA) 7) Omega Haptic Device (Carnegie Mellon University, USA) 8) DWL66 Laser Lithography - Heidelberg (Carnegie Mellon University, USA) 9) Xactix Xenon Diflouride Etching System- XACTIX (Carnegie Mellon University, USA) 10) Sputtering System- Lesker (Carnegie Mellon University, USA) 11) Profilometer- Dektak (Carnegie Mellon University, USA) 5

6 12 Xactix Xenon Diflouride Etching System- XACTIX (Carnegie Mellon University, USA) 13) 3D Printer, Invision HR (Carnegie Mellon University, USA) SCHOLARSHIPS Hacettepe Üniversitesi Makine Mühendisliği Bölümü Yurt Dışı Eğitim Bursu Carnegie Mellon Üniversitesi Makine Mühendisliği Bursu AWARDS Ranked first in the design and manufacturing of paper collator machine project (Final project, Middle East Technical University, Turkey, 2003) SCIENCE CITATION INDEX (SCI) 7 citations are given to my publications in Science Citation Index since ) MSc PUBLICATIONS Thesis Lateral Pushing based Microtribological Characterization of Microparticles using Atomic Force Microscopy, Carnegie Mellon University, USA, May ) Ph. D. Modeling and Characterization of Micro/Nanoscale Particle and Fiber Manipulation Systems, Carnegie Mellon University, USA, January

7 INTERNATIONAL JOURNALS (SCI ) 1) K. Chuengsatiansup, K. Şahin, B. Sümer and M. Sitti, Hair-inspired Piezoelectric Polymer Sensor, Sensor Letters. (Under Review) 2) B. Sümer, B. Aksak, K. Şahin, K. Chuengsatiansup and M. Sitti,, 'Piezoelectric Polymer Fiber Arrays for Tactile Sensing Applications'. Sensor Letters (In press) 3) B. Sümer, C.D Onal, B. Aksak and Metin Sitti, An Experimental Analysis of Eliptical Adhesive Contact, J. of Applied Physics, 107 (11352), ) C.D Onal, B. Sümer and M.Sitti, Cross-talk Compensation in Atomic Force Microscopy, Review of Scientific Instruments, 79(10):103706, ) B. Sümer and M. Sitti, Rolling and Spinning Friction Characterization of Fine Particles Using Lateral Force Microscopy Based Contact Pushing, J. of Adhesion Science and Technology, 22(5 6), , INTERNATIONAL CONFERENCE PUBLICATIONS 1) A novel artificial hair receptor based on aligned PVDF micro/nano fibers, Proceedings of the 2008 IEEE International Conference on Robotics and Biomimetics, February,22 25,2009,Bangkok, Thailand. (Best Paper Finalist) PROJECTS COMPLETED PROJECTS PROJECT 1 Project Name : Probes Nano-Robotic Manipulation Systems using Atomic Force Microscope 7

8 Supporter : Project Coordinator: Researcher: Researcher: National Science Foundation (NSF-USA) Assoc Prof. Dr. Metin Sitti (Carnegie Mellon University) Bilsay Sümer (Carnegie Mellon University) Çağdaş D. Önal (Carnegie Mellon University) Project Start & End Dates: Papers based on Nano-Robotic Manipulation Systems using Atomic Force Microscope Probes project: 1) B. Sümer and M. Sitti, Rolling and Spinning Friction Characterization of Fine Particles Using Lateral Force Microscopy Based Contact Pushing, J. of Adhesion Science and Technology, 22(5 6), , ) C.D Önal, B. Sümer and M.Sitti, Cross-talk Compensation in Atomic Force Microscopy, Review of Scientific Instruments, 79(10):103706, 2008 PROJE 2 Project Name : Nanomechanics of Biologically Inspired Repeatable and Hierarchical Elastomer Fibrillar Adhesives Supporter : National Science Foundation (NSF-USA) Project Coordinator: Researcher: Researcher: Assoc Prof. Dr. Metin Sitti (Carnegie Mellon Üniversitesi) Bilsay Sümer (Carnegie Mellon Üniversitesi) Burak Aksak (Carnegie Mellon Üniversitesi) Projenin Başlangıç ve Bitiş Tarihleri: Papers based on Nanomechanics of Biologically Inspired Repeatable and Hierarchical Elastomer Fibrillar Adhesives project: 1) B. Sümer, C.D Onal, B. Aksak and Metin Sitti, An Experimental Analysis of Eliptical Adhesive Contact, J. of Applied Physics, J. of Applied Physics, 107 (11352),

9 2) B. Sümer, B. Aksak, K. Şahin, K. Chuengsatiansup and M. Sitti,, 'Piezoelectric Polymer Fiber Arrays for Tactile Sensing Applications'. Sensor Letters (In revision) CURRENT THESIS ADVISING ACTIVITY 1) İstanbul Technical University Mechanical Engineering Department, M.Sc Thesis, Ayşegül Güvenç, Viscoelestic Polymer Friction and Adhesion Characterization using JKR apparatus 2) İstanbul Technical University Mechanical Engineering Department, M.Sc Thesis, Emre Akça, Vertical PVDF Fibers as Sensors and Actuators INTERNATIONAL COLLABORATION International Institute for Multifunctional Materials for Energy Conversion Organization, International Collaborator. OTHER ACEDEMIC ACTIVITIES Referee of Journal of Micro-Nano Mechatronics Referee of Journal of Adhesion Referee of IEEE ICRA 9

Mehmet Burak KAYNAR Physics Engineer. Outline. Personal Information

Mehmet Burak KAYNAR Physics Engineer. Outline. Personal Information Mehmet Burak KAYNAR Physics Engineer Hacettepe Uni. Physic Engineering Dept. SNTG Lab. Beytepe, Ankara Turkey Tel: +90 536 251 1158 Fax: +90 312 299 20 37 e-mail: bkaynar@hacettepe.edu.tr Web: http://yunus.hacettepe.edu.tr/~bkaynar/

More information

DR AYŞE KÜÇÜKYILMAZ. Imperial College London Personal Robotics Laboratory Department of Electrical and Electronic Engineering SW7 2BT London UK

DR AYŞE KÜÇÜKYILMAZ. Imperial College London Personal Robotics Laboratory Department of Electrical and Electronic Engineering SW7 2BT London UK DR AYŞE KÜÇÜKYILMAZ Imperial College London Personal Robotics Laboratory Department of Electrical and Electronic Engineering SW7 2BT London UK http://home.ku.edu.tr/~akucukyilmaz a.kucukyilmaz@imperial.ac.uk

More information

NanoManufacturing and NanoRobots

NanoManufacturing and NanoRobots A Full Day Workshop: NanoManufacturing and NanoRobots June 2, 2009 Objectives 50 years ago, Feynman talked his vision of factories using nanomachines to build complex products, including additional nanomachines,

More information

DR AYŞE KÜÇÜKYILMAZ. Yeditepe University Department of Computer Engineering Kayışdağı Caddesi 34755 Istanbul Turkey

DR AYŞE KÜÇÜKYILMAZ. Yeditepe University Department of Computer Engineering Kayışdağı Caddesi 34755 Istanbul Turkey DR AYŞE KÜÇÜKYILMAZ Yeditepe University Department of Computer Engineering Kayışdağı Caddesi 34755 Istanbul Turkey http://cse.yeditepe.edu.tr/~akucukyilmaz akucukyilmaz@cse.yeditepe.edu.tr QUALIFICATIONS

More information

Examination sessions (two) winter session (January/February) summer session (June/July) Courses per years Year I Semester I Semester II crt.

Examination sessions (two) winter session (January/February) summer session (June/July) Courses per years Year I Semester I Semester II crt. Transilvania University of Braşov, Romania Study program: EGINEERING AND MANAGEMENT OF ADVANCED MATERIALS METALLIC, CERAMIC AND COMPOSITE Faculty MATERIALS SCIENCE and ENGINEERING Study program (Curriculum)

More information

Injection moulding and modelling on a micro scale

Injection moulding and modelling on a micro scale Injection moulding and modelling on a micro scale Technology Update Injection moulding and welding of plastics 11 November 2014 Research Projects (National / European) Micro/Nano/Multimaterial Manufacturing

More information

CIRICULUM VITAE 1. PERSONAL. Date of Birth-Place : March 2 nd 1984- Balikesir, Turkey

CIRICULUM VITAE 1. PERSONAL. Date of Birth-Place : March 2 nd 1984- Balikesir, Turkey CIRICULUM VITAE 1. PERSONAL Name, Title : Derya ATAÇ, M.Sc. Date of Birth-Place : March 2 nd 1984- Balikesir, Turkey Address Phone E-mail : NanoElectronics Group (NE), MESA+ Institute for Nanotechnology,

More information

CAN ÇETİN. Adress +90 536 968 4800. Telephone. cancetincc@gmail.com. E- Mail & Skype

CAN ÇETİN. Adress +90 536 968 4800. Telephone. cancetincc@gmail.com. E- Mail & Skype CAN ÇETİN Adress Yeditepe University, Faculty of Engineering and Architecture Department of Genetics and Bioengineering Tissue Engineering Laboratory 34755 Kayışdağı - Istanbul Turkey Telephone E- Mail

More information

Usage of Carbon Nanotubes in Scanning Probe Microscopes as Probe. Keywords: Carbon Nanotube, Scanning Probe Microscope

Usage of Carbon Nanotubes in Scanning Probe Microscopes as Probe. Keywords: Carbon Nanotube, Scanning Probe Microscope International Journal of Arts and Sciences 3(1): 18-26 (2009) CD-ROM. ISSN: 1944-6934 InternationalJournal.org Usage of Carbon Nanotubes in Scanning Probe Microscopes as Probe Bedri Onur Kucukyildirim,

More information

MEMS devices application based testing

MEMS devices application based testing MEMS devices application based testing CEEES Seminar 18-10-2012 RDM Campus Rotterdam NL by Kees Revenberg MASER Engineering Enschede NL Outline Introduction MEMS classification Sensing & Actuating Manufacturing

More information

Engineering Materials Research /DEVISER/

Engineering Materials Research /DEVISER/ DEVelopment of Infrastructure for Smart Engineering Materials Research /DEVISER/ A Czech structural funds project aimed for building a new public research infrastructure called Laboratory of Functional

More information

Formation of Oriented Fibers Using Injection of PEO Solutions inside Electric Fields Defined by Two Parallel Suspended Electrodes

Formation of Oriented Fibers Using Injection of PEO Solutions inside Electric Fields Defined by Two Parallel Suspended Electrodes 06 (43)-AF:Modelo-AF 8/20/11 6:41 AM Page 122 Formation of Oriented Fibers Using Injection of PEO Solutions inside Electric Fields Defined by Two Parallel Suspended R. Furlan 1, J. A. M. Rosado 2, A. N.

More information

Computational Mechanics & Manufacturing (CMM)

Computational Mechanics & Manufacturing (CMM) Graduate Program on Computational Mechanics & Manufacturing (CMM) Sakarya University Institute of Natural Sciences Computational Mechanics and Manufacturing Division 54187, Serdivan, Sakarya, TURKEY E-mail:

More information

Master in Robotics & Transport

Master in Robotics & Transport Master in Robotics & Transport MRT Objectives The international Master MRT is designed to train international students interested in developing their professional knowledge and skills in engineering sciences,

More information

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Le nanotecnologie: dal Laboratorio al Mercato Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Materials & Processes for micro nanotechnologies Laboratory http://www.polito.it/micronanotech

More information

SEM/FIB Workbench. Klocke Nanotechnik. Microtechnology Network. Motion from the Nanoworld. One of 279 members in a. Pascalstr. 17 Aachen, Germany

SEM/FIB Workbench. Klocke Nanotechnik. Microtechnology Network. Motion from the Nanoworld. One of 279 members in a. Pascalstr. 17 Aachen, Germany Intro_0 SEM/FIB Workbench Motion from the Nanoworld One of 279 members in a Pascalstr. 17 Aachen, Germany Microtechnology Network Centimeter Stroke Atomic Resolution Modular Nanorobotics Modular Nanorobotics

More information

2013 2018 (Expected) PhD: Texas Tech University / Lubbock - USA Mechanical Engineering CGPA: 3.57 / 4.00 (Ongoing)

2013 2018 (Expected) PhD: Texas Tech University / Lubbock - USA Mechanical Engineering CGPA: 3.57 / 4.00 (Ongoing) Education 2013 2018 (Expected) PhD: Texas Tech University / Lubbock - USA Mechanical Engineering CGPA: 3.57 / 4.00 (Ongoing) 2007 2013 BS-Major: Middle East Technical University / Ankara TURKEY Mechanical

More information

CIRP Encyclopedia of Production Engineering

CIRP Encyclopedia of Production Engineering The International Academy for Production Engineering Luc Laperriere Gunther Reinhart Editors CIRP Encyclopedia of Production Engineering Volume 1 A-H With 1145 Figures and 85 Tables ^ Springer Reference

More information

Scanning Probe Microscopy

Scanning Probe Microscopy Ernst Meyer Hans Josef Hug Roland Bennewitz Scanning Probe Microscopy The Lab on a Tip With 117 Figures Mß Springer Contents 1 Introduction to Scanning Probe Microscopy f f.1 Overview 2 f.2 Basic Concepts

More information

The energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management.

The energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management. Elective Concentrations The program in Mechanical Engineering is designed to appeal to students with a wide variety of interests and professional goals. By an appropriate choice of elective courses, students

More information

Pulsed laser deposition of organic materials

Pulsed laser deposition of organic materials Pulsed laser deposition of organic materials PhD theses Gabriella Kecskeméti Department of Optics and Quantum Electronics University of Szeged Supervisor: Dr. Béla Hopp senior research fellow Department

More information

Paolo Dario. Brief Curriculum Vitae

Paolo Dario. Brief Curriculum Vitae Paolo Dario Brief Curriculum Vitae Paolo Dario is Full Professor of Biomedical Robotics and Director of The BioRobotics Institute of the Scuola Superiore Sant'Anna (SSSA), Pisa, Italy. He is the Coordinator

More information

MSc in Actuarial Sciences, Hacettepe University, Ankara, TURKEY, September 2004 - July 2007 Supervisor: Prof. Ömer Esensoy

MSc in Actuarial Sciences, Hacettepe University, Ankara, TURKEY, September 2004 - July 2007 Supervisor: Prof. Ömer Esensoy Uğur Karabey (Phd) Department of Actuarial Sciences, Faculty of Science, Hacettepe University, 06800, Beytepe, Phone: +90 312 297 61 60 / 130 Fax : +90 312 297 79 98 E-mail: ukarabey@hacettepe.edu.tr Personel

More information

Boğaziçi University Institute of Biomedical Engineering. Guide for MSc and PhD Applicants

Boğaziçi University Institute of Biomedical Engineering. Guide for MSc and PhD Applicants Boğaziçi University Institute of Biomedical Engineering Guide for MSc and PhD Applicants Institute of Biomedical Engineering The Institute of Biomedical Engineering at Boğaziçi University was founded in

More information

Assoc. Prof. Dr. Serdar KÜÇÜK

Assoc. Prof. Dr. Serdar KÜÇÜK Assoc. Prof. Dr. Serdar KÜÇÜK Biography. Education: 2004: Ph.D. in Technical Educational Faculty, Electrical Department, Kocaeli University, Kocaeli, TURKEY. Thesis Title: Modeling and off-line programming

More information

Pipe Inspection Robots for Structural Health Monitoring

Pipe Inspection Robots for Structural Health Monitoring Pipe Inspection Robots for Structural Health Monitoring Pipe Inspection Robots for Gas and Oil Pipe-lines Almost all the energy related utilities like fuel, gas or oil supply lines and power generation

More information

: http://www.muh.istanbul.edu.tr:3500/makine/akademik2.asp?id=33

: http://www.muh.istanbul.edu.tr:3500/makine/akademik2.asp?id=33 CURRICULUM VITAE Name : Yunus Ziya ARSLAN Born : February 8, 1980, Balıkesir, Turkey Citizenship : Turkish Marital status : Married Address : İstanbul Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği

More information

Class of 2016 Second Year Common CORE - 2013-2014

Class of 2016 Second Year Common CORE - 2013-2014 2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75

More information

SILA Sistema Integrato di Laboratori per l Ambiente. CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa

SILA Sistema Integrato di Laboratori per l Ambiente. CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa 0 The Centre for Microscopy and Microanalysis (CM2) is an interdisciplinary service centre, a comprehensive suite

More information

Dong Bai March 2012. Adjunct Professor Office Phone: 973-655-5132 Department of Mathematical Sciences Office Fax: 973-655-7686

Dong Bai March 2012. Adjunct Professor Office Phone: 973-655-5132 Department of Mathematical Sciences Office Fax: 973-655-7686 Dong Bai March 2012 Adjunct Professor Office Phone: 973-655-5132 Department of Mathematical Sciences Office Fax: 973-655-7686 E-Mail: baid@mail.montclair.edu Montclair, NJ 07043 EDUCATION Ph. D. University

More information

CURRICULUM VITAE. Dept. of Mechanical Engineering and Industrial Design Τ.Ε.Ι. of Western Macedonia 50100 KOZANI, GREECE

CURRICULUM VITAE. Dept. of Mechanical Engineering and Industrial Design Τ.Ε.Ι. of Western Macedonia 50100 KOZANI, GREECE CURRICULUM VITAE PERSONAL DATA Name: Dimokritos Panagiotopoulos Date of birth: March 21, 1960 Family Status: Married, has two children Current Posistion: Work Address: Tel. No. (Work): Mobile No.: E-mail:

More information

I m minimizing the injuries of pedestrians in car accidents

I m minimizing the injuries of pedestrians in car accidents GRADUATE SCHOOL 2015-2016 I m minimizing the injuries of pedestrians in car accidents Graduate program * This major is formally part of the Computer Science & Engineering Bachelor program Graduate program

More information

Curriculum Vitae - Carmel Majidi 1

Curriculum Vitae - Carmel Majidi 1 Curriculum Vitae - Carmel Majidi 1 CARMEL MAJIDI ASSISTANT PROFESSOR Department of Mechanical Engineering Carnegie Mellon University Scaife Hall, Room 408A, Carnegie Mellon University, Pittsburgh, PA 15213

More information

STM and AFM Tutorial. Katie Mitchell January 20, 2010

STM and AFM Tutorial. Katie Mitchell January 20, 2010 STM and AFM Tutorial Katie Mitchell January 20, 2010 Overview Scanning Probe Microscopes Scanning Tunneling Microscopy (STM) Atomic Force Microscopy (AFM) Contact AFM Non-contact AFM RHK UHV350 AFM/STM

More information

Assoc. Prof. Dr. M. Aylin DELİORMANLI

Assoc. Prof. Dr. M. Aylin DELİORMANLI Assoc. Prof. Dr. M. Aylin DELİORMANLI EDUCATION Degree University Department / Program Undergrad Ege University Chemical Engineering 99 99 M.S. Izmir Institute of Tech. Materials Science and Engineering

More information

Laser Based Micro and Nanoscale Manufacturing and Materials Processing

Laser Based Micro and Nanoscale Manufacturing and Materials Processing Laser Based Micro and Nanoscale Manufacturing and Materials Processing Faculty: Prof. Xianfan Xu Email: xxu@ecn.purdue.edu Phone: (765) 494-5639 http://widget.ecn.purdue.edu/~xxu Research Areas: Development

More information

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection

More information

ENERGY DISSIPATION IN CONDUCTIVE POLYMERIC FIBER BUNDLES: SIMULATION EFFORT

ENERGY DISSIPATION IN CONDUCTIVE POLYMERIC FIBER BUNDLES: SIMULATION EFFORT ENERGY DISSIPATION IN CONDUCTIVE POLYMERIC FIBER BUNDLES: SIMULATION EFFORT NSF Summer Undergraduate Fellowship in Sensor Technologies Dorci Lee Torres-Velázquez (Mathematics) - University of Puerto Rico

More information

FIKRET KORHAN TURAN A. EDUCATION

FIKRET KORHAN TURAN A. EDUCATION FIKRET KORHAN TURAN Address: Istanbul Kemerburgaz University, Mahmutbey Dilmenler Cad., No: 26, 34217 Bagcilar, Istanbul, Turkey E-mail: korhan.turan@kemerburgaz.edu.tr Phone: +90 (212) 604 0100 (Extension:

More information

Home Address : İstasyon Mah. 2335 Sk. Nu: 4B/ 6 PK: 06790 Etimesgut Ankara / Turkey. : Postponed for Academical Purposes

Home Address : İstasyon Mah. 2335 Sk. Nu: 4B/ 6 PK: 06790 Etimesgut Ankara / Turkey. : Postponed for Academical Purposes CURRICULUMVITAE Personal Information: Full Name Birth Date / Place : Muhammet Hakan Horzum : 26.03.1991 / Isparta Home Address : İstasyon Mah. 2335 Sk. Nu: 4B/ 6 PK: 06790 Etimesgut Ankara / Turkey Cellular

More information

Irmak KARADEMIR HAZIR. Department of Sociology, Middle East Technical University, 06531 Ankara, TURKEY E-Mail: irmakka@metu.edu.tr

Irmak KARADEMIR HAZIR. Department of Sociology, Middle East Technical University, 06531 Ankara, TURKEY E-Mail: irmakka@metu.edu.tr Irmak KARADEMIR HAZIR Department of Sociology, Middle East Technical University, 06531 Ankara, TURKEY E-Mail: irmakka@metu.edu.tr EDUCATION Ph.D., 2009-2013: Sociology, University of Manchester, United

More information

Engineering (ENGR) Courses. University of California, Irvine 2015-2016 1

Engineering (ENGR) Courses. University of California, Irvine 2015-2016 1 University of California, Irvine 2015-2016 1 Engineering (ENGR) Courses ENGR 1A. General Chemistry for Engineers. 4 Units. Emphasis on solid-state chemistry. Quantum theory, atomic structure, periodic

More information

The pole Optique-Rhône. Rhône-Alpes: a booster of innovation in Optics&Photonics

The pole Optique-Rhône. Rhône-Alpes: a booster of innovation in Optics&Photonics The pole Optique-Rhône Rhône-Alpes: a booster of innovation in Optics&Photonics The scientific and industrial forces of Rhône-Alpes region 1 000 20 000 5 400 8 000 1 000 1 000 2 500 1 500 500 2 500 1 500

More information

Guide to Chinese Government Scholarship on China-U.S. Cultural and Educational Exchanges (CSC-CCEE)

Guide to Chinese Government Scholarship on China-U.S. Cultural and Educational Exchanges (CSC-CCEE) Donghua University, Year 2015 Guide to Chinese Government Scholarship on China-U.S. Cultural and Educational Exchanges (CSC-CCEE) For the purpose of the long-term and sustainable exchange and cooperation

More information

LIST OF VOTING TASSA BOARD MEMBERS (2009)

LIST OF VOTING TASSA BOARD MEMBERS (2009) LIST OF VOTING TASSA BOARD MEMBERS (2009) The following members of the Board comprise the Executive Committee Banu Onaral, Ph.D. President Founding Director of School of Biomedical Engineering, Science

More information

Form-flexible Handling Technology (FormHand) for Automation in RTM preforming

Form-flexible Handling Technology (FormHand) for Automation in RTM preforming Institute of Machine Tools and Production Technology Platzhalter für Bild, Bild auf Titelfolie hinter das Logo einsetzen Form-flexible Handling Technology (FormHand) for Automation in RTM preforming Dr.-Ing.

More information

Fluid transport at the nano- and meso- scales

Fluid transport at the nano- and meso- scales NanoSOFT Fluid transport at the nano- and meso- scales from fundamentals to applications in energy harvesting and desalination process Alessandro Siria Starting Grant 2014 Panel: PE 3, Condensed Matter

More information

IBM's Millipede. Conor Walsh Friction and Wear of Materials RPI Hartford 12/13/12

IBM's Millipede. Conor Walsh Friction and Wear of Materials RPI Hartford 12/13/12 IBM's Millipede Conor Walsh Friction and Wear of Materials RPI Hartford 12/13/12 The Millipede data storage device was developed by IBM and first demonstrated as a prototype at the 2005 CeBIT computer

More information

UNIVERSITY PROPOSAL SAMPLES

UNIVERSITY PROPOSAL SAMPLES UNIVERSITY PROPOSAL SAMPLES Appalachian State University: The Institution and Physics Department Appalachian state University (ASU) is a mid-sized regional state university serving approximately 15,000

More information

Hanover Center for Optical Technologies - HOT

Hanover Center for Optical Technologies - HOT Hanover Center for Optical Technologies - HOT apl. Prof. Dr. Bernhard Roth Bernhard.Roth@hot.uni-hannover.de www.hot.uni-hannover.de Hannover, November 18 th, 2014 Hannoversches Zentrum für Optische Technologien

More information

CURRICULUM VITAE. Nicosia, Cyprus.

CURRICULUM VITAE. Nicosia, Cyprus. CURRICULUM VITAE Home Adress: Okyanus Sokak, No. 17, Yenikent, Gönyeli, TRNC. Phone: +90 533 857 52 77 E-mail: ilke.yucekan@gmail.com Personal Information Name& Surname: İlke Yücekan Marital status: Married

More information

Atomic Force Microscopy. July, 2011 R. C. Decker and S. Qazi

Atomic Force Microscopy. July, 2011 R. C. Decker and S. Qazi Atomic Force Microscopy July, 2011 R. C. Decker and S. Qazi Learning through Visualization Visualization of physical phenomena can confirm hypothesis Observation provides opportunities for study without

More information

3D TOPOGRAPHY & IMAGE OVERLAY OF PRINTED CIRCUIT BOARD ASSEMBLY

3D TOPOGRAPHY & IMAGE OVERLAY OF PRINTED CIRCUIT BOARD ASSEMBLY 3D TOPOGRAPHY & IMAGE OVERLAY OF PRINTED CIRCUIT BOARD ASSEMBLY Prepared by Duanjie Li, PhD & Andrea Novitsky 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard

More information

Basic principles and mechanisms of NSOM; Different scanning modes and systems of NSOM; General applications and advantages of NSOM.

Basic principles and mechanisms of NSOM; Different scanning modes and systems of NSOM; General applications and advantages of NSOM. Lecture 16: Near-field Scanning Optical Microscopy (NSOM) Background of NSOM; Basic principles and mechanisms of NSOM; Basic components of a NSOM; Different scanning modes and systems of NSOM; General

More information

The Italian High Tech Cluster for Nanotechnologies

The Italian High Tech Cluster for Nanotechnologies The Italian High Tech Cluster for Nanotechnologies Venezia, 16 gennaio 2007 Enzo Sisti Investor Relations, Veneto Nanotech Raffaele Franco Marketing Manager, Nanofab NANOTECHNOLOGIES: THAT S UNKNOWN! 1

More information

Graduate Education @ Tsinghua GAO Hong, Ph.D.

Graduate Education @ Tsinghua GAO Hong, Ph.D. Graduate Education @ Tsinghua GAO Hong, Ph.D. Associate Dean, Graduate School, Tsinghua University A Comprehensive & Research intensive University 16 schools 56 departments Engineering Sciences Humanities

More information

Leti Introduction and Overview

Leti Introduction and Overview Leti Introduction and Overview Leti Day in Tokyo, October 3rd 2012 Laurent Malier 2012 Leti 2012 1 CEA The CEA at a glance Commissariat à l Énergie Atomique et aux Énergies Alternatives is one of the largest

More information

2010 Master of Science Computer Science Department, University of Massachusetts Amherst

2010 Master of Science Computer Science Department, University of Massachusetts Amherst Scott Niekum Postdoctoral Research Fellow The Robotics Institute, Carnegie Mellon University Contact Information Smith Hall, Room 228 Carnegie Mellon University 5000 Forbes Avenue Pittsburgh, PA 15213

More information

PEDRO SEQUEIRA CURRICULUM VITAE

PEDRO SEQUEIRA CURRICULUM VITAE PEDRO SEQUEIRA CURRICULUM VITAE IST Taguspark - Av. Prof. Cavaco Silva, 2.N.9-15 2744-016 Porto Salvo, Portugal +351 214 233 508 pedro.sequeira@gaips.inesc- id.pt SUMMARY I am a post- doctoral associate

More information

Departments and Specializations

Departments and Specializations Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural

More information

2015-2016 Facility Rates & Expense Caps

2015-2016 Facility Rates & Expense Caps NANOFAB FEES / SERVICES Entry Fee $20.00/Day $32.10/Day Nanofab Training Fee $25.00/Hour $40.13/Hour Nanofab Process Development/Labor $50.00/Hour $80.25/Hour Model Shop $25.00/Month $40.13/Month Wafer

More information

nanovea.com MECHANICAL TESTERS Indentation Scratch Wear

nanovea.com MECHANICAL TESTERS Indentation Scratch Wear MECHANICAL TESTERS Indentation Scratch Wear nanovea.com MECHANICAL TESTER INTRO Nanovea Mechanical Testers provide unmatched multi-function Nano and Micro/Macro modules on a single platform. Both the Nano

More information

CURRICULUM VITAE GÖKHAN BERKER

CURRICULUM VITAE GÖKHAN BERKER CURRICULUM VITAE GÖKHAN BERKER Personal Information Date/Place of Birth : 09.07.1982/Izmir-TURKEY Contact Information Address: Mustafa Kemal Str. Nationality Marital Status Driving license Military Obligation

More information

Prof. Dr. İsmet Vildan ALPTEKİN Department of Landscape Architecture ismet.alptekin@isikun.edu.tr

Prof. Dr. İsmet Vildan ALPTEKİN Department of Landscape Architecture ismet.alptekin@isikun.edu.tr Prof. Dr. İsmet Vildan ALPTEKİN Department of Landscape Architecture ismet.alptekin@isikun.edu.tr Prof. Dr. Ismet Vildan Alptekin, completed his undergraduate and graduate studies in Ankara University

More information

An Overview of the Graduate Study Program in Mechanical Engineering at Michigan State University

An Overview of the Graduate Study Program in Mechanical Engineering at Michigan State University An Overview of the Graduate Study Program in Mechanical Engineering at Michigan State University Ahmed Naguib Associate Chair for the Graduate Program Michigan State University First American Land Grant

More information

Double Degree exchange programs taught at Phelma for KTH students

Double Degree exchange programs taught at Phelma for KTH students Double Degree exchange programs taught at Phelma for KTH students Double Degree program for KTH students: In-coming Double Degree KTH students are registered in KTH and in Phelma, but they do not pay registration

More information

Leghe a memoria di forma come tecnologia di attuazione per la biorobotica

Leghe a memoria di forma come tecnologia di attuazione per la biorobotica Leghe a memoria di forma come tecnologia di attuazione per la biorobotica Milano, 7 novembre, 2013 Maurizio Follador maurizio.follador@sssup.it Advanced Education, Frontier Interdisciplinary Research and

More information

Lecture 4 Scanning Probe Microscopy (SPM)

Lecture 4 Scanning Probe Microscopy (SPM) Lecture 4 Scanning Probe Microscopy (SPM) General components of SPM; Tip --- the probe; Cantilever --- the indicator of the tip; Tip-sample interaction --- the feedback system; Scanner --- piezoelectric

More information

: Married, father of 31 years old son and 21 years old daughter

: Married, father of 31 years old son and 21 years old daughter CURRICULUM VITAE Name Date of Birth Place of Birth Nationality Marital Status : Abdurrazak Öncü : July 5th1955 : Kırıkkale, : Turkish : Married, father of 31 years old son and 21 years old daughter EDUCATION

More information

Regulations of Studies of the International Master Degree. "Electrical Power Engineering (EPE)" Darmstadt University of Technology

Regulations of Studies of the International Master Degree. Electrical Power Engineering (EPE) Darmstadt University of Technology Regulations of Studies of the International Master Degree in "Electrical Power Engineering" 1/9 Regulations of Studies of the International Master Degree "Electrical Power Engineering (EPE)" Department

More information

Physics Graduate Program Handbook

Physics Graduate Program Handbook Carnegie Mellon University Department of Physics November 14, 2012 Version 1.1 Physics Graduate Program Handbook This document presents the rules and requirements governing the Graduate Program in the

More information

EXPERIMENTAL STUDY OF STRUCTURAL ZONE MODEL FOR COMPOSITE THIN FILMS IN MAGNETIC RECORDING MEDIA APPLICATION

EXPERIMENTAL STUDY OF STRUCTURAL ZONE MODEL FOR COMPOSITE THIN FILMS IN MAGNETIC RECORDING MEDIA APPLICATION EXPERIMENTAL STUDY OF STRUCTURAL ZONE MODEL FOR COMPOSITE THIN FILMS IN MAGNETIC RECORDING MEDIA APPLICATION Hua Yuan and David E. Laughlin Department of Materials Science and Engineering, Carnegie Mellon

More information

ES Engineering & Consultancy

ES Engineering & Consultancy ES Engineering & Consultancy About Us About Us We are a group of Electronics/Biomedical/Software Engineers & Surgeons With Strong Background in; Systems&Software Engineering Robotic Surgery Medical System

More information

EUROPEAN STUDIES IN TURKEY: PRESENT STATE AND PROPOSALS FOR THE FUTURE

EUROPEAN STUDIES IN TURKEY: PRESENT STATE AND PROPOSALS FOR THE FUTURE EUROPEAN STUDIES IN TURKEY: PRESENT STATE AND PROPOSALS FOR THE FUTURE European studies in Turkey have gone through intensive development in the last few years, especially after the Helsinki summit. Today

More information

GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014. Change in pre-requisites to Graduate standing in HDF or permission of instructor.

GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014. Change in pre-requisites to Graduate standing in HDF or permission of instructor. GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014 I. 500/600-level courses Changes: 1) College of Human Sciences and Services Human Development and Family Studies HDF 536 Family Dynamics and Health

More information

Piezoelectric Scanners

Piezoelectric Scanners Piezoelectric Scanners Piezoelectric materials are ceramics that change dimensions in response to an applied voltage and conversely, they develop an electrical potential in response to mechanical pressure.

More information

A METHOD OF PRECISE CALIBRATION FOR PIEZOELECTRICAL ACTUATORS

A METHOD OF PRECISE CALIBRATION FOR PIEZOELECTRICAL ACTUATORS Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Cilt 9, Sayı, 24 A METHOD OF PRECISE CALIBRATION FOR PIEZOELECTRICAL ACTUATORS Timur CANEL * Yüksel BEKTÖRE ** Abstract: Piezoelectrical actuators

More information

- particle with kinetic energy E strikes a barrier with height U 0 > E and width L. - classically the particle cannot overcome the barrier

- particle with kinetic energy E strikes a barrier with height U 0 > E and width L. - classically the particle cannot overcome the barrier Tunnel Effect: - particle with kinetic energy E strikes a barrier with height U 0 > E and width L - classically the particle cannot overcome the barrier - quantum mechanically the particle can penetrated

More information

Tecniche a scansione di sonda per nanoscopia e nanomanipolazione 2: AFM e derivati

Tecniche a scansione di sonda per nanoscopia e nanomanipolazione 2: AFM e derivati LS Scienza dei Materiali - a.a. 2008/09 Fisica delle Nanotecnologie part 5.2 Version 7, Nov 2008 Francesco Fuso, tel 0502214305, 0502214293 - fuso@df.unipi.it http://www.df.unipi.it/~fuso/dida Tecniche

More information

Guten Tag, THOMAS JÖRN Universität des Saarlandes Institut für Werkstoffwissenschaften Öffentlichkeitsarbeit

Guten Tag, THOMAS JÖRN Universität des Saarlandes Institut für Werkstoffwissenschaften Öffentlichkeitsarbeit Guten Tag, sollten im Zuge der Verarbeitung dieser Präsentation irgendwelchen Fragen oder Probleme auftauchen, wenden Sie sich ggf. gerne und jederzeit an mich: THOMAS JÖRN Universität des Saarlandes Institut

More information

Erdem Selek, Assistant Professor (2015) MSc, Industrial Product Design, Istanbul Technical University, Istanbul, Turkey, 2008

Erdem Selek, Assistant Professor (2015) MSc, Industrial Product Design, Istanbul Technical University, Istanbul, Turkey, 2008 Product Design Updated 10.27.15 John Arndt, Interim Program Director 541-346-6697 254 Lawrence Hall http://pd.uoregon.edu Faculty John Arndt, Associate Professor (2008) Master of Design, Social and Environmental

More information

LabRAM HR. Research Raman Made Easy! Raman Spectroscopy Systems. Spectroscopy Suite. Powered by:

LabRAM HR. Research Raman Made Easy! Raman Spectroscopy Systems. Spectroscopy Suite. Powered by: LabRAM HR Research Raman Made Easy! Raman Spectroscopy Systems Powered by: Spectroscopy Suite Cutting-Edge Applications with the LabRAM HR Deeply involved in Raman spectroscopy for decades, HORIBA Scientific

More information

Curriculum Vitae. Personal information. Work experience. Education and training. Personal skills and competences

Curriculum Vitae. Personal information. Work experience. Education and training. Personal skills and competences Curriculum Vitae Personal information First name(s) / Surname(s) Melike Fırlak Address Telephone +90 (212) 604 0100 Internal:1838 Mobile: +90 (535) 952 3353 Fax +90 (212) 445 9255 E-mail melike.firlak@kemerburgaz.edu.tr,

More information

Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive. Wolfgang Hentsch, Dr. Reinhard Fendler. FHR Anlagenbau GmbH

Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive. Wolfgang Hentsch, Dr. Reinhard Fendler. FHR Anlagenbau GmbH Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive Sputtertechnologien Wolfgang Hentsch, Dr. Reinhard Fendler FHR Anlagenbau GmbH Germany Contents: 1. FHR Anlagenbau GmbH in Brief

More information

The Science Education System in Oxford and the UK. David Andrews

The Science Education System in Oxford and the UK. David Andrews The Science Education System in Oxford and the UK David Andrews 1 Outline of this talk High school education (brief) Undergraduate education Oxford Physics Other sciences at Oxford Other universities Postgraduate

More information

Virtual Environments - Basics -

Virtual Environments - Basics - Virtual Environments - Basics - What Is Virtual Reality? A Web-Based Introduction Version 4 Draft 1, September, 1998 Jerry Isdale http://www.isdale.com/jerry/vr/whatisvr.html Virtual Environments allow

More information

Resume of Hanan H. Elazhary

Resume of Hanan H. Elazhary Resume of Hanan H. Elazhary Home Phone: 35853017, 35853986 Cell Phone: 0112302019 E-mail: hanan@eri.sci.eg, hananelazhary@hotmail.com Nationality: Egyptian Gender: Female EDUCATION Ph.D. in Computer Science

More information

CURRICULUM VITAE. Degree Department/Program University Year. B.A. Mechanical Engineering Land Force Academy 1991

CURRICULUM VITAE. Degree Department/Program University Year. B.A. Mechanical Engineering Land Force Academy 1991 CURRICULUM VITAE Name & Surname : A. Murat KOSEOGLU Date of birth : 15.03.1969 Title : Assist. Prof. Dr. Education: Degree Department/Program University Year B.A. Mechanical Engineering Land Force Academy

More information

PhD Presentation, Nov. 9 2011, Pisa. CV of BioRobotics Arianna Menciassi Christian Cipriani

PhD Presentation, Nov. 9 2011, Pisa. CV of BioRobotics Arianna Menciassi Christian Cipriani PhD Presentation, Nov. 9 2011, Pisa CV of BioRobotics Arianna Menciassi Christian Cipriani The BioRobotics Institute Pontedera, 20 km from Pisa, 15 minutes by train 2 Full Professors 3 + 1 Associate Professors

More information

ENGINEERING AT CAMBRIDGE

ENGINEERING AT CAMBRIDGE ENGINEERING AT CAMBRIDGE GEOFF PARKS DIRECTOR OF UNDERGRADUATE ADMISSIONS ENGINEERING Engineers are ingenious people who apply science and technology to the fulfilment of human needs and aspirations Engineers

More information

Curriculum Vitae. 01 August 1973, Gümüşhane, TURKEY. Phone : +90 352 4374901 / Ext.: 32230. : kilic@erciyes.edu.tr

Curriculum Vitae. 01 August 1973, Gümüşhane, TURKEY. Phone : +90 352 4374901 / Ext.: 32230. : kilic@erciyes.edu.tr Curriculum Vitae Full Name: Date & Place of Birth: Office Contact: Dr. Recai KILIÇ 01 August 1973, Gümüşhane, TURKEY. Dept. of Electrical&Electronics Eng., Faculty of Engineering, Erciyes University, Kayseri,

More information

Counting and imaging bacteria using fluorescent microscopy & Electron Microscopy and Atomic Force Microscopy (AFM)

Counting and imaging bacteria using fluorescent microscopy & Electron Microscopy and Atomic Force Microscopy (AFM) Counting and imaging bacteria using fluorescent microscopy & Electron Microscopy and Atomic Force Microscopy (AFM) Bruce E. Logan Kappe Professor of Environmental Engineering Department of Civil and Environmental

More information

Submitted By: Submitted To: XYZ ABCD ******** Mechatronics

Submitted By: Submitted To: XYZ ABCD ******** Mechatronics Submitted To: ABCD Submitted By: XYZ ******** Mechatronics END EFFECTORS In robotics, an end effector is the device at the end of a robotic arm, designed to interact with the environment. The exact nature

More information

5. Scanning Near-Field Optical Microscopy 5.1. Resolution of conventional optical microscopy

5. Scanning Near-Field Optical Microscopy 5.1. Resolution of conventional optical microscopy 5. Scanning Near-Field Optical Microscopy 5.1. Resolution of conventional optical microscopy Resolution of optical microscope is limited by diffraction. Light going through an aperture makes diffraction

More information

Diamond SA. Connectors for Advanced Fiber Systems Losone, 26.06.2014 Dr. Sc. Matteo Castiglioni DIAMOND SA 27/06/2014 1

Diamond SA. Connectors for Advanced Fiber Systems Losone, 26.06.2014 Dr. Sc. Matteo Castiglioni DIAMOND SA 27/06/2014 1 Diamond SA Connectors for Advanced Fiber Systems Losone, 26.06.2014 Dr. Sc. Matteo Castiglioni 1 1958 COMPANY FOUNDATION IN LOCARNO INITIAL AREA OF BUSINESS MACHINING OF HARDEST RAW MATERIALS MANUFACTURE

More information

CURRICULUM VITAE (CV)

CURRICULUM VITAE (CV) 1. Name & Surname: Önder Bulut CURRICULUM VITAE (CV) 2. Date of Birth / Place: September 30, 1977 Afyon, Turkey 3. Academic Title: Asst. Prof. Dr. 4. Education Level: Level Field University Year PhD Industrial

More information

INTERNATIONAL GRADUATE PROGRAMMES

INTERNATIONAL GRADUATE PROGRAMMES University of Trento Department of Industrial Engineering INTERNATIONAL GRADUATE PROGRAMMES MASTERMAT - MATERIALS ENGINEERING MASTERMECH - MECHATRONICS ENGINEERING international.unitn.it/mastermat international.unitn.it/mastermech

More information

It has long been a goal to achieve higher spatial resolution in optical imaging and

It has long been a goal to achieve higher spatial resolution in optical imaging and Nano-optical Imaging using Scattering Scanning Near-field Optical Microscopy Fehmi Yasin, Advisor: Dr. Markus Raschke, Post-doc: Dr. Gregory Andreev, Graduate Student: Benjamin Pollard Department of Physics,

More information