ecfshome-ts Terminal Server How to Use

Transcription

1 ecfshome-ts Terminal Server How to Use Connect to VPN Connect to Terminal Server, Set Options to Use Personal Computer Files, Printers, Clipboard Use Network Folders Copy Files from Network Folders to Your Personal Computer Create Desktop Shortcuts My Computer, Private Print to Your Personal Printer Internet Used from Terminal Server Situation: You have Cisco Any Connect VPN software installed and can successfully connect. How do you access your Private and Public folders and use the internet? For security reasons, direct access from your personal computer to the Internet and college servers is not possible. You must use the terminal server to get to the internet and to access your network folders, and other network resources. Overview: First connect to Cisco AnyConnect VPN Client and then remote desktop to terminal server ecfshome-ts. Connect to VPN 1. Verify that your connection to the internet is working. 2. Start Cisco AnyConnect VPN Client (Win 7) Start, Programs, Cisco Click Cisco AnyConnect VPN Client Click Cisco AnyConnect VPN Client Optional: Make a desktop shortcut to start VPN and double click it whenever you want to start VPN. Right click on Cisco AnyConnect VPN client, Send to, Desktop (create shortcut)

2 3. Connect to vpn.etown.edu Group: Select 1-Non-College-Owned_Computer Username: This is your network username Password: This is the password you specified when you filled in the VPN form Note: Your VPN password never expires Click Connect 4. Click Accept 5. Allow time for VPN to start. You may see this message. 6. Display the Cisco AnyConnect VPN Client icon in your system tray (Win7) Click the arrow in the lower right corner near the clock. Click Customize 7. Scroll to find VPN User Interface. Next to Hide icon and notifications, click the list arrow and seledt Show icon and notifications. Click OK. 8. Whenever you are connected to Cisco AnyConnect VPN Client, the icon will be displayed in the system tray. Connect to Terminal Server, Set Options to Use Personal Computer Files, Printers, Clipboard 9. Start, All Programs, Accessories, Remote Desktop Connection 10. Computer: ecfshome-ts Click Options Arrow Note: Options only have to be set once 2

3 11. Click Local Resources tab Check Printers (this allows you to print to your personal printer) Check clipboard (This allows you to copy and paste from the ecfshome-ts terminal server to your local computer.) 12. Click More Local devices and resources Check the devices and resources you wish to use during your VPN sessions. Click OK 13. Click OK Collapse Options click the arrow Next time you log in, you won't have to set options. Just click Connect. 14. Click Connect 15. Click Connect 16. Click OK 17. User name: same as username Password: same as password Log on to: JAYNET Click OK 3

4 18. Click OK 19. Connected to ecfshome-ts Note: First time setup will be slow as your user profile is created. This window works best full screen kell Log Off ecfshome-ts 1. Click the X on the terminal server bar Click OK 4

5 Open a File from Your Private Folder on the College Network 1. Double click My Computer Note: You may create a shortcut to Private on the terminal server to get there quickly See page 8, Shortcut to Private 2. Personal and college network drives appear 3. Navigate to the folder and file as you normally do 4. Open a Microsoft Office file by double clicking it 5

6 Copy a File from Private to Your Personal Computer 1. Start My Computer Double click your user drive this is the one with your user name and $ 2. Double click Private 3. Right mouse click the file to be copied Click Copy 4. Double click My Computer 6

7 5. Under Other Double click C on (your personal computer's name) 6. Double click Documents and Settings 7. Double click the name of your folder 8. Double click your name's Documents 9. Right mouse click in an empty area inside Documents folder 10. Click Paste 11. Copied file is located in the My Documents folder on your personal computer 7

8 Advanced Steps and Tips The VPN log on and access to the ecfshome-ts terminal server procedures can be enhanced by creating shortcuts. can be accessed by opening Outlook which will be automatically setup. Working on the remote server allows full use of the internet. Browser Favorites can be copied from your personal computer to the Terminal server. The goal of the ecfshome-ts terminal server is to give you an up to date, secure computer system to access college network resources. The terminal server works best if the terminal server window fills the screen (maximized). Create Shortcut to My Computer on the Terminal Server Desktop 1. On the terminal server 2. Click Start, point to My Computer Right mouse click 3. Click Show on Desktop 4. My Computer icon on ecfshome-ts terminal server desktop Create Shortcut to Private Folder on the College Network 1. On the ecfshome-ts terminal server 2. Double click My Computer desktop shortcut or Start, My Computer 3. Under Network Drives Double click your drive 8

9 4. Right mouse click Private Click Send To Desktop (create shortcut) 5. Shortcut to Private on desktop Print to Your Personal Printer 1. Because you checked Printers on page Error! Bookmark not defined., step 11, you can print to your local printer 2. From any program on the ecfshome-ts Terminal Server, bring up the print dialog box and choose your local printer Internet 1. YOU WON'T BE ABLE TO USE THE INTERNET ON YOUR Personal COMPUTER 2. Use Internet Explorer on the ecfshome-ts terminal server 9